Angelo Dureghello 5bebd8dbc5 mtd: devices: fix mchp23k256 read and write ... commit 14f89e0881 upstream. Due to the use of sizeof(), command size set for the spi transfer was wrong. Driver was sending and receiving always 1 byte less and especially on write, it was hanging. echo -n -e "\\x1\\x2\\x3\\x4" > /dev/mtd1 And read part too now works as expected. hexdump -C -n16 /dev/mtd1 00000000 01 02 03 04 ab f3 ad c2 ab e3 f4 36 dd 38 04 15 00000010 Fixes: 4379075a87 ("mtd: mchp23k256: Add support for mchp23lcv1024") Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>		2020-01-23 08:21:37 +01:00
..
chips	mtd: cfi_cmdset_0002: Use chip_good() to retry in do_write_oneword()	2019-10-01 08:26:02 +02:00
devices	mtd: devices: fix mchp23k256 read and write	2020-01-23 08:21:37 +01:00
lpddr
maps	mtd: physmap_of: Release resources on error	2019-11-24 08:20:17 +01:00
nand	mtd: onenand: omap2: Pass correct flags for prep_dma_memcpy	2020-01-17 19:47:00 +01:00
parsers
spi-nor	mtd: spi-nor: fix silent truncation in spi_nor_read_raw()	2020-01-17 19:47:12 +01:00
tests
ubi	ubi: Do not drop UBI device reference before using	2019-12-05 09:20:11 +01:00
afs.c
ar7part.c
bcm47xxpart.c
bcm63xxpart.c
cmdlinepart.c
ftl.c
inftlcore.c
inftlmount.c
Kconfig
Makefile
mtd_blkdevs.c
mtdblock.c
mtdblock_ro.c
mtdchar.c
mtdconcat.c
mtdcore.c
mtdcore.h	mtd: Check add_mtd_device() ret code	2019-12-05 09:21:05 +01:00
mtdoops.c
mtdpart.c	mtd: Remove a debug trace in mtdpart.c	2019-12-05 09:21:24 +01:00
mtdsuper.c
mtdswap.c
nftlcore.c
nftlmount.c
ofpart.c
redboot.c
rfd_ftl.c
sm_ftl.c
sm_ftl.h
ssfdc.c