linux-uconsole/drivers/usb
Mathias Nyman cc8b329fef usb: xhci: Prevent bus suspend if a port connect change or polling state is detected
commit 2f31a67f01 upstream.

USB3 roothub might autosuspend before a plugged USB3 device is detected,
causing USB3 device enumeration failure.

USB3 devices don't show up as connected and enabled until USB3 link trainig
completes. On a fast booting platform with a slow USB3 link training the
link might reach the connected enabled state just as the bus is suspending.

If this device is discovered first time by the xhci_bus_suspend() routine
it will be put to U3 suspended state like the other ports which failed to
suspend earlier.

The hub thread will notice the connect change and resume the bus,
moving the port back to U0

This U0 -> U3 -> U0 transition right after being connected seems to be
too much for some devices, causing them to first go to SS.Inactive state,
and finally end up stuck in a polling state with reset asserted

Fix this by failing the bus suspend if a port has a connect change or is
in a polling state in xhci_bus_suspend().

Don't do any port changes until all ports are checked, buffer all port
changes and only write them in the end if suspend can proceed

Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-01 09:37:25 +01:00
..
atm USB: atm: fix up some remaining DEVICE_ATTR() usage 2018-01-24 08:49:52 +01:00
c67x00 USB: add SPDX identifiers to all remaining Makefiles 2017-11-07 15:53:48 +01:00
chipidea usb: chipidea: Prevent unbalanced IRQ disable 2018-11-13 11:08:36 -08:00
class usb: cdc-acm: add entry for Hiro (Conexant) modem 2018-11-27 16:13:09 +01:00
common usb: roles: Take care of driver module reference counting 2018-09-20 13:20:24 +02:00
core usb: core: Fix hub port connection events lost 2018-12-01 09:37:24 +01:00
dwc2 usb: dwc2: fix a race with external vbus supply 2018-11-13 11:08:34 -08:00
dwc3 usb: dwc3: Fix NULL pointer exception in dwc3_pci_remove() 2018-12-01 09:37:24 +01:00
early usb: early: Correct the endpoint type value for bulk in endpoint 2017-12-07 16:03:15 +01:00
gadget usb: gadget: udc: renesas_usb3: Fix b-device mode for "workaround" 2018-11-13 11:08:41 -08:00
host usb: xhci: Prevent bus suspend if a port connect change or polling state is detected 2018-12-01 09:37:25 +01:00
image USB/PHY patches for 4.15-rc1 2017-11-13 21:14:07 -08:00
isp1760 usb: isp1760: remove redundant variable 'selector' 2018-07-13 15:41:56 +02:00
misc USB: misc: appledisplay: add 20" Apple Cinema Display 2018-11-27 16:13:10 +01:00
mon USB: mon: use ktime_get_real_ts64 instead of getnstimeofday64 2018-06-25 21:58:26 +08:00
mtu3 usb: mtu3: fix error of xhci port id when enable U3 dual role 2018-09-05 13:27:07 +02:00
musb usb: musb: dsps: do not disable CPPI41 irq in driver teardown 2018-09-20 12:40:14 +02:00
phy usb/phy: fix PPC64 build errors in phy-fsl-usb.c 2018-07-21 08:15:12 +02:00
renesas_usbhs usb: renesas_usbhs: Kconfig: convert to SPDX identifiers 2018-07-30 15:27:14 +02:00
roles usb: roles: intel_xhci: Fix Unbalanced pm_runtime_enable 2018-10-09 16:13:42 +02:00
serial USB: serial: simple: add Motorola Tetra MTP6550 id 2018-09-24 15:30:16 +02:00
storage usb: uas: add support for more quirk flags 2018-09-05 13:27:07 +02:00
typec usb: typec: tcpm: Fix APDO PPS order checking to be based on voltage 2018-11-13 11:08:41 -08:00
usbip usbip:vudc: BUG kmalloc-2048 (Not tainted): Poison overwritten 2018-11-13 11:08:41 -08:00
wusbcore usb: wusbcore: security: cast sizeof to int for comparison 2018-07-02 18:08:19 +02:00
Kconfig usb: select USB_COMMON for usb role switch config 2018-04-22 15:23:37 +02:00
Makefile usb: roles: Add Intel xHCI USB role switch driver 2018-03-22 13:49:27 +01:00
README
usb-skeleton.c usb: usb-skeleton: use irqsave() in USB's complete callback 2018-06-28 19:36:06 +09:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.