linux-uconsole/drivers/usb
Daniel Thompson 46e9398c96 usb: xhci: Add XHCI_TRUST_TX_LENGTH for Renesas uPD720201
commit da99706689 upstream.

When plugging in a USB webcam I see the following message:
xhci_hcd 0000:04:00.0: WARN Successful completion on short TX: needs
XHCI_TRUST_TX_LENGTH quirk?
handle_tx_event: 913 callbacks suppressed

All is quiet again with this patch (and I've done a fair but of soak
testing with the camera since).

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02 20:33:28 +01:00
..
atm USB: atm: cxacru: fix blank line after declaration 2015-07-22 14:55:22 -07:00
c67x00
chipidea usb: chipidea: vbus event may exist before starting gadget 2017-10-08 10:14:18 +02:00
class usb: cdc_acm: Add quirk for Elatec TWN3 2017-10-27 10:23:15 +02:00
common usb: define USB_SPEED_SUPER_PLUS speed for SuperSpeedPlus USB3.1 devices 2016-09-07 08:32:39 +02:00
core USB: Fix off by one in type-specific length check of BOS SSP capability 2018-01-02 20:33:27 +01:00
dwc2 usb: dwc2: fix regression on big-endian PowerPC/ARM systems 2016-07-27 09:47:28 -07:00
dwc3 usb: dwc3: replace %p with %pK 2017-07-15 11:57:45 +02:00
early
gadget usb: gadget: udc: remove pointer dereference after free 2017-12-25 14:22:10 +01:00
host usb: xhci: Add XHCI_TRUST_TX_LENGTH for Renesas uPD720201 2018-01-02 20:33:28 +01:00
image scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
isp1760 usb: isp1760: udc: add ep capabilities support 2015-08-04 12:26:55 -05:00
misc usb: usbtest: fix NULL pointer dereference 2017-11-18 11:11:05 +01:00
mon USB: mon_stat.c: move assignment out of if () block 2015-05-10 16:01:11 +02:00
musb usb: musb: da8xx: fix babble condition handling 2017-12-20 10:05:00 +01:00
phy usb: phy: isp1301: Add OF device ID table 2017-12-20 10:04:52 +01:00
renesas_usbhs usb: renesas_usbhs: Fix DMAC sequence for receiving zero-length packet 2017-10-18 09:20:41 +02:00
serial USB: serial: option: adding support for YUGA CLM920-NC5 2018-01-02 20:33:27 +01:00
storage USB: uas and storage: Add US_FL_BROKEN_FUA for another JMicron JMS567 ID 2017-12-20 10:04:51 +01:00
usbip usbip: vhci: stop printing kernel pointer addresses in messages 2018-01-02 20:33:27 +01:00
wusbcore USB: wusbcore: fix NULL-deref at probe 2017-03-30 09:35:17 +02:00
Kconfig
Makefile usb-host: Remove fusbh200 driver 2015-10-16 23:44:33 -07:00
README
usb-skeleton.c

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.