linux-uconsole/drivers/usb
William Wu 1afe4e7ce2 usb: dwc2: disable lpm feature on Rockchip SoCs
LPM feature of DWC2 module integrated in Rockchip SoCs doesn't work
properly or needs some additional handling, so disable it for now.
Without disabling LPM feature, the USB ADB communication fail with
the following error log:

dwc2 ff580000.usb: new address 27
dwc2 ff580000.usb: Failed to exit L1 sleep state in 200us.
dwc2 ff580000.usb: dwc2_hsotg_send_reply: cannot queue req
dwc2 ff580000.usb: dwc2_hsotg_process_req_status: failed to send reply
dwc2 ff580000.usb: dwc2_hsotg_enqueue_setup: failed queue (-11)
dwc2 ff580000.usb: Failed to exit L1 sleep state in 200us.

Change-Id: I4e2b243fba2f1536c39f313232433cfd295113d6
Signed-off-by: William Wu <william.wu@rock-chips.com>
2019-09-05 14:07:08 +08:00
..
atm BACKPORT: USB: add missing SPDX lines to Kconfig and Makefiles 2019-05-16 19:19:54 +08:00
c67x00
chipidea Merge remote branch 'android-4.19' of https://android.googlesource.com/kernel/common 2019-06-22 22:26:14 +08:00
class Merge remote branch 'android-4.19' of https://android.googlesource.com/kernel/common 2019-06-22 22:26:14 +08:00
common usb: common: Consider only available nodes for dr_mode 2019-04-03 06:26:27 +02:00
core Merge remote branch 'android-4.19' of https://android.googlesource.com/kernel/common 2019-06-22 22:26:14 +08:00
dwc2 usb: dwc2: disable lpm feature on Rockchip SoCs 2019-09-05 14:07:08 +08:00
dwc3 usb: dwc3: move synchronize_irq() out of the spinlock protected block 2019-05-31 06:46:10 -07:00
dwc_otg_310
early
gadget Merge remote branch 'android-4.19' of https://android.googlesource.com/kernel/common 2019-06-22 22:26:14 +08:00
host Merge remote branch 'android-4.19' of https://android.googlesource.com/kernel/common 2019-06-22 22:26:14 +08:00
image BACKPORT: USB: add missing SPDX lines to Kconfig and Makefiles 2019-05-16 19:19:54 +08:00
isp1760 BACKPORT: USB: add missing SPDX lines to Kconfig and Makefiles 2019-05-16 19:19:54 +08:00
misc Merge remote branch 'android-4.19' of https://android.googlesource.com/kernel/common 2019-06-22 22:26:14 +08:00
mon BACKPORT: USB: add missing SPDX lines to Kconfig and Makefiles 2019-05-16 19:19:54 +08:00
mtu3 Merge remote branch 'android-4.19' of https://android.googlesource.com/kernel/common 2019-06-22 22:26:14 +08:00
musb Merge remote branch 'android-4.19' of https://android.googlesource.com/kernel/common 2019-06-22 22:26:14 +08:00
phy Merge remote branch 'android-4.19' of https://android.googlesource.com/kernel/common 2019-06-22 22:26:14 +08:00
renesas_usbhs usb: renesas_usbhs: add support for RZ/G2E 2019-02-12 19:47:10 +01:00
roles BACKPORT: USB: add missing SPDX lines to Kconfig and Makefiles 2019-05-16 19:19:54 +08:00
serial Merge remote branch 'android-4.19' of https://android.googlesource.com/kernel/common 2019-06-22 22:26:14 +08:00
storage Merge remote branch 'android-4.19' of https://android.googlesource.com/kernel/common 2019-06-22 22:26:14 +08:00
typec Merge remote branch 'android-4.19' of https://android.googlesource.com/kernel/common 2019-06-22 22:26:14 +08:00
usbip Merge remote branch 'android-4.19' of https://android.googlesource.com/kernel/common 2019-06-22 22:26:14 +08:00
wusbcore BACKPORT: USB: add missing SPDX lines to Kconfig and Makefiles 2019-05-16 19:19:54 +08:00
Kconfig BACKPORT: USB: add missing SPDX lines to Kconfig and Makefiles 2019-05-16 19:19:54 +08:00
Makefile rk: revert to v4.4 2019-02-10 00:33:21 +08:00
README
usb-skeleton.c

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.