linux-uconsole/drivers/serial
Valentin Longchamp 5eb1c77df3 serial: imx.c: fix CTS trigger level lower to avoid lost chars
commit 1c5250d616 upstream.

The imx CTS trigger level is left at its reset value that is 32
chars. Since the RX FIFO has 32 entries, when CTS is raised, the
FIFO already is full. However, some serial port devices first empty
their TX FIFO before stopping when CTS is raised, resulting in lost
chars.

This patch sets the trigger level lower so that other chars arrive
after CTS is raised, there is still room for 16 of them.

Signed-off-by: Valentin Longchamp<valentin.longchamp@epfl.ch>
Tested-by: Philippe Rétornaz<philippe.retornaz@epfl.ch>
Acked-by: Wolfram Sang<w.sang@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-26 14:29:16 -07:00
..
cpm_uart Fix build of cpm_uart due to core changes 2009-09-24 17:01:22 +10:00
jsm serial: kill off uart_info 2009-09-19 13:13:28 -07:00
8250.c serial: 8250: add serial transmitter fully empty test 2010-02-23 07:37:56 -08:00
8250.h serial: 8250: add IRQ trigger support 2009-09-19 13:13:19 -07:00
8250_accent.c
8250_acorn.c
8250_boca.c
8250_early.c 8250: switch 8250 drivers to use _nocache ioremaps 2008-05-01 08:04:00 -07:00
8250_exar_st16c554.c
8250_fourport.c
8250_gsc.c serial: 8250_gsc: fix printk format error 2009-05-29 08:40:02 -07:00
8250_hp300.c
8250_hub6.c
8250_mca.c
8250_pci.c serial: add support for the Lava Quattro PCI quad-port 16550A card 2009-11-12 07:25:57 -08:00
8250_pnp.c serial: 8250_pnp - add Fujitsu Wacom device 2010-05-12 14:57:05 -07:00
21285.c serial: kill off uart_info 2009-09-19 13:13:28 -07:00
68328serial.c serial, 8250: remove NR_IRQ usage 2008-10-16 16:52:02 +02:00
68328serial.h
68360serial.c Fix compile errors in SGI console drivers (linux-next tree) 2008-07-20 17:12:36 -07:00
amba-pl010.c serial: move delta_msr_wait into the tty_port 2009-09-19 13:13:31 -07:00
amba-pl011.c serial: move delta_msr_wait into the tty_port 2009-09-19 13:13:31 -07:00
atmel_serial.c atmel_serial: fix bad BUILD_BUG_ON() usage 2009-10-29 07:39:30 -07:00
bcm63xx_uart.c bcm63xx_uart: Fix serial driver compile breakage. 2009-11-30 16:38:32 -08:00
bfin_5xx.c serial: kill off uart_info 2009-09-19 13:13:28 -07:00
bfin_sport_uart.c serial: kill off uart_info 2009-09-19 13:13:28 -07:00
bfin_sport_uart.h Blackfin serial driver: this driver enable SPORTs on Blackfin emulate UART 2008-04-30 08:29:30 -07:00
clps711x.c serial: kill off uart_info 2009-09-19 13:13:28 -07:00
crisv10.c CRIS: fix defconfig build failure 2009-08-31 18:38:16 +02:00
crisv10.h tty: Use the generic RS485 ioctl on CRIS 2009-04-07 08:44:05 -07:00
dz.c serial: kill off uart_info 2009-09-19 13:13:28 -07:00
dz.h
icom.c icom: convert space to tabs 2009-10-01 16:11:15 -07:00
icom.h
imx.c serial: imx.c: fix CTS trigger level lower to avoid lost chars 2010-05-26 14:29:16 -07:00
ioc3_serial.c serial: move delta_msr_wait into the tty_port 2009-09-19 13:13:31 -07:00
ioc4_serial.c serial: move delta_msr_wait into the tty_port 2009-09-19 13:13:31 -07:00
ip22zilog.c serial: move delta_msr_wait into the tty_port 2009-09-19 13:13:31 -07:00
ip22zilog.h
Kconfig uartlite: allow building for timberdale MFD 2009-10-01 16:11:12 -07:00
kgdboc.c tty: The big operations rework 2008-04-30 08:29:47 -07:00
m32r_sio.c serial: kill off uart_info 2009-09-19 13:13:28 -07:00
m32r_sio.h
m32r_sio_reg.h
Makefile MIPS: BCM63xx: Add serial driver for bcm63xx integrated UART. 2009-09-30 21:46:59 +02:00
max3100.c spi: prefix modalias with "spi:" 2009-09-23 07:39:43 -07:00
mcf.c serial: kill off uart_info 2009-09-19 13:13:28 -07:00
mpc52xx_uart.c drivers/serial/mpc52xx_uart.c: Use UPIO_MEM rather than SERIAL_IO_MEM 2009-10-15 09:58:28 -06:00
mpsc.c serial: kill off uart_info 2009-09-19 13:13:28 -07:00
msm_serial.c serial: move delta_msr_wait into the tty_port 2009-09-19 13:13:31 -07:00
msm_serial.h msm_serial: serial driver for MSM7K onboard serial peripheral. 2009-06-22 11:32:25 -07:00
mux.c serial: kill off uart_info 2009-09-19 13:13:28 -07:00
netx-serial.c serial: kill off uart_info 2009-09-19 13:13:28 -07:00
nwpserial.c serial: kill off uart_info 2009-09-19 13:13:28 -07:00
of_serial.c tty/of_serial: add missing ns16550a id 2009-11-30 16:38:44 -08:00
pmac_zilog.c serial: move delta_msr_wait into the tty_port 2009-09-19 13:13:31 -07:00
pmac_zilog.h
pnx8xxx_uart.c serial: move delta_msr_wait into the tty_port 2009-09-19 13:13:31 -07:00
pxa.c Merge branch 'origin' into for-linus 2009-09-24 21:22:33 +01:00
s3c24a0.c ARM: S3C24XX: serial: Fix section mismatch warnings 2009-07-30 23:56:41 +01:00
s3c2400.c ARM: S3C24XX: serial: Fix section mismatch warnings 2009-07-30 23:56:41 +01:00
s3c2410.c ARM: S3C24XX: serial: Fix section mismatch warnings 2009-07-30 23:56:41 +01:00
s3c2412.c ARM: S3C24XX: serial: Fix section mismatch warnings 2009-07-30 23:56:41 +01:00
s3c2440.c ARM: S3C24XX: serial: Fix section mismatch warnings 2009-07-30 23:56:41 +01:00
s3c6400.c ARM: S3C64XX: serial: Fix section mismatch warning 2009-07-30 23:56:41 +01:00
sa1100.c ARM: Fix SA1100 Neponset serial section mismatch 2009-09-28 18:06:16 +01:00
samsung.c serial: kill off uart_info 2009-09-19 13:13:28 -07:00
samsung.h serial: samsung.c: mark s3c24xx_serial_remove as __devexit 2009-06-22 11:32:24 -07:00
sb1250-duart.c serial: move delta_msr_wait into the tty_port 2009-09-19 13:13:31 -07:00
sc26xx.c serial: kill off uart_info 2009-09-19 13:13:28 -07:00
serial_core.c tty, serial: Fix race and NULL check in uart_close() 2009-10-12 10:21:33 -07:00
serial_cs.c pcnet_cs: add cis of PreMax PE-200 ethernet pcmcia card 2009-10-29 22:51:25 -07:00
serial_ks8695.c serial: move delta_msr_wait into the tty_port 2009-09-19 13:13:31 -07:00
serial_lh7a40x.c serial: move delta_msr_wait into the tty_port 2009-09-19 13:13:31 -07:00
serial_txx9.c serial_txx9: use container_of() instead of direct cast 2009-10-01 16:11:15 -07:00
sh-sci.c serial: sh-sci: disable callback typo fix 2009-11-06 17:23:04 +09:00
sh-sci.h sh: Add initial support for SH7757 CPU subtype 2009-08-21 17:25:47 +09:00
sn_console.c serial: kill off uart_info 2009-09-19 13:13:28 -07:00
suncore.c serial: suncore: Fix RSC/LOM handling in sunserial_console_termios(). 2009-11-24 14:09:56 -08:00
suncore.h serial: suncore: Fix RSC/LOM handling in sunserial_console_termios(). 2009-11-24 14:09:56 -08:00
sunhv.c serial: suncore: Fix RSC/LOM handling in sunserial_console_termios(). 2009-11-24 14:09:56 -08:00
sunsab.c serial: suncore: Fix RSC/LOM handling in sunserial_console_termios(). 2009-11-24 14:09:56 -08:00
sunsab.h
sunsu.c sunsu: Use sunserial_console_termios() in sunsu_console_setup(). 2009-11-24 14:12:50 -08:00
sunzilog.c serial: suncore: Fix RSC/LOM handling in sunserial_console_termios(). 2009-11-24 14:09:56 -08:00
sunzilog.h
timbuart.c serial: move delta_msr_wait into the tty_port 2009-09-19 13:13:31 -07:00
timbuart.h serial: Added Timberdale UART driver 2009-06-11 08:51:06 -07:00
uartlite.c uartlite: fix crash when using as console 2010-02-09 04:51:01 -08:00
ucc_uart.c serial: kill off uart_info 2009-09-19 13:13:28 -07:00
vr41xx_siu.c serial: move delta_msr_wait into the tty_port 2009-09-19 13:13:31 -07:00
zs.c serial: move delta_msr_wait into the tty_port 2009-09-19 13:13:31 -07:00
zs.h