809ffa2b9f
This add a new driver for renesas xhci which is basically a firmware loader for uPD720201 and uPD720202 w/o ROM. It uses xhci-pci driver for most of the work. This is added in Makefile before the xhci-pci driver so that it first get probed for renesas devices before the xhci-pci driver has a chance to claim any device. This patch adds a firmware loader for the uPD720201K8-711-BAC-A and uPD720202K8-711-BAA-A variant. Both of these chips are listed in Renesas' R19UH0078EJ0500 Rev.5.00 "User's Manual: Hardware" as devices which need the firmware loader on page 2 in order to work as they "do not support the External ROM". The "Firmware Download Sequence" is describe in chapter "7.1 FW Download Interface" R19UH0078EJ0500 Rev.5.00 page 131. The firmware "K2013080.mem" is available from a USB3.0 Host to PCIe Adapter (PP2U-E card) "Firmware download" archive. An alternative version can be sourced from Netgear's WNDR4700 GPL archives. The release notes of the PP2U-E's "Firmware Download" ver 2.0.1.3 (2012-06-15) state that the firmware is for the following devices: - uPD720201 ES 2.0 sample whose revision ID is 2. - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3. - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2. Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> [vkoul: fixed comments: used macros for timeout count and delay removed renesas_fw_alive_check cleaned renesas_fw_callback removed recurion for renesas_fw_download added MODULE_FIRMWARE add register defines and field names move to a separate driver] Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Bug: 146449535 Change-Id: I6a06261fd637dd68bf9df72a30bca0431ab04c2a Link: https://lore.kernel.org/linux-arm-msm/20200113084005.849071-3-vkoul@kernel.org/
91 lines
3 KiB
Makefile
91 lines
3 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0
|
|
#
|
|
# Makefile for USB Host Controller Drivers
|
|
#
|
|
|
|
# tell define_trace.h where to find the xhci trace header
|
|
CFLAGS_xhci-trace.o := -I$(src)
|
|
|
|
fhci-y := fhci-hcd.o fhci-hub.o fhci-q.o
|
|
fhci-y += fhci-mem.o fhci-tds.o fhci-sched.o
|
|
|
|
fhci-$(CONFIG_FHCI_DEBUG) += fhci-dbg.o
|
|
|
|
xhci-hcd-y := xhci.o xhci-mem.o xhci-ext-caps.o
|
|
xhci-hcd-y += xhci-ring.o xhci-hub.o xhci-dbg.o
|
|
xhci-hcd-y += xhci-trace.o
|
|
|
|
ifneq ($(CONFIG_USB_XHCI_DBGCAP), )
|
|
xhci-hcd-y += xhci-dbgcap.o xhci-dbgtty.o
|
|
endif
|
|
|
|
ifneq ($(CONFIG_USB_XHCI_MTK), )
|
|
xhci-hcd-y += xhci-mtk-sch.o
|
|
endif
|
|
|
|
xhci-plat-hcd-y := xhci-plat.o
|
|
ifneq ($(CONFIG_USB_XHCI_MVEBU), )
|
|
xhci-plat-hcd-y += xhci-mvebu.o
|
|
endif
|
|
ifneq ($(CONFIG_USB_XHCI_RCAR), )
|
|
xhci-plat-hcd-y += xhci-rcar.o
|
|
endif
|
|
|
|
ifneq ($(CONFIG_DEBUG_FS),)
|
|
xhci-hcd-y += xhci-debugfs.o
|
|
endif
|
|
|
|
obj-$(CONFIG_USB_PCI) += pci-quirks.o
|
|
|
|
obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
|
|
obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
|
|
obj-$(CONFIG_USB_EHCI_HCD_PLATFORM) += ehci-platform.o
|
|
obj-$(CONFIG_USB_EHCI_MXC) += ehci-mxc.o
|
|
obj-$(CONFIG_USB_EHCI_HCD_NPCM7XX) += ehci-npcm7xx.o
|
|
obj-$(CONFIG_USB_EHCI_HCD_OMAP) += ehci-omap.o
|
|
obj-$(CONFIG_USB_EHCI_HCD_ORION) += ehci-orion.o
|
|
obj-$(CONFIG_USB_EHCI_HCD_SPEAR) += ehci-spear.o
|
|
obj-$(CONFIG_USB_EHCI_HCD_STI) += ehci-st.o
|
|
obj-$(CONFIG_USB_EHCI_EXYNOS) += ehci-exynos.o
|
|
obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci-atmel.o
|
|
obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o
|
|
|
|
obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o
|
|
obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
|
|
obj-$(CONFIG_USB_ISP1362_HCD) += isp1362-hcd.o
|
|
|
|
obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o
|
|
obj-$(CONFIG_USB_OHCI_HCD_PCI) += ohci-pci.o
|
|
obj-$(CONFIG_USB_OHCI_HCD_PLATFORM) += ohci-platform.o
|
|
obj-$(CONFIG_USB_OHCI_EXYNOS) += ohci-exynos.o
|
|
obj-$(CONFIG_USB_OHCI_HCD_OMAP1) += ohci-omap.o
|
|
obj-$(CONFIG_USB_OHCI_HCD_SPEAR) += ohci-spear.o
|
|
obj-$(CONFIG_USB_OHCI_HCD_STI) += ohci-st.o
|
|
obj-$(CONFIG_USB_OHCI_HCD_AT91) += ohci-at91.o
|
|
obj-$(CONFIG_USB_OHCI_HCD_S3C2410) += ohci-s3c2410.o
|
|
obj-$(CONFIG_USB_OHCI_HCD_LPC32XX) += ohci-nxp.o
|
|
obj-$(CONFIG_USB_OHCI_HCD_PXA27X) += ohci-pxa27x.o
|
|
obj-$(CONFIG_USB_OHCI_HCD_DAVINCI) += ohci-da8xx.o
|
|
|
|
obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o
|
|
obj-$(CONFIG_USB_FHCI_HCD) += fhci.o
|
|
obj-$(CONFIG_USB_XHCI_HCD) += xhci-hcd.o
|
|
obj-$(CONFIG_USB_XHCI_PCI_RENESAS) += xhci-pci-renesas.o
|
|
obj-$(CONFIG_USB_XHCI_PCI) += xhci-pci.o
|
|
obj-$(CONFIG_USB_XHCI_PLATFORM) += xhci-plat-hcd.o
|
|
obj-$(CONFIG_USB_XHCI_HISTB) += xhci-histb.o
|
|
obj-$(CONFIG_USB_XHCI_MTK) += xhci-mtk.o
|
|
obj-$(CONFIG_USB_XHCI_TEGRA) += xhci-tegra.o
|
|
obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd.o
|
|
obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o
|
|
obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o
|
|
obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o
|
|
obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd.o
|
|
obj-$(CONFIG_USB_FSL_USB2) += fsl-mph-dr-of.o
|
|
obj-$(CONFIG_USB_EHCI_FSL) += fsl-mph-dr-of.o
|
|
obj-$(CONFIG_USB_EHCI_FSL) += ehci-fsl.o
|
|
obj-$(CONFIG_USB_EHCI_MV) += ehci-mv.o
|
|
obj-$(CONFIG_USB_HCD_BCMA) += bcma-hcd.o
|
|
obj-$(CONFIG_USB_HCD_SSB) += ssb-hcd.o
|
|
obj-$(CONFIG_USB_FOTG210_HCD) += fotg210-hcd.o
|
|
obj-$(CONFIG_USB_MAX3421_HCD) += max3421-hcd.o
|