linux-uconsole/drivers/usb
Chris Dickens 825c1ae065 usb: gadget: composite: fix incorrect handling of OS desc requests
[ Upstream commit 5d6ae4f0da ]

When handling an OS descriptor request, one of the first operations is
to zero out the request buffer using the wLength from the setup packet.
There is no bounds checking, so a wLength > 4096 would clobber memory
adjacent to the request buffer. Fix this by taking the min of wLength
and the request buffer length prior to the memset. While at it, define
the buffer length in a header file so that magic numbers don't appear
throughout the code.

When returning data to the host, the data length should be the min of
the wLength and the valid data we have to return. Currently we are
returning wLength, thus requests for a wLength greater than the amount
of data in the OS descriptor buffer would return invalid (albeit zero'd)
data following the valid descriptor data. Fix this by counting the
number of bytes when constructing the data and using this when
determining the length of the request.

Signed-off-by: Chris Dickens <christopher.a.dickens@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30 07:49:13 +02:00
..
atm
c67x00
chipidea usb: chipidea: properly handle host or gadget initialization failure 2018-04-13 19:50:07 +02:00
class CDC-ACM: apply quirk for card reader 2018-02-03 17:04:30 +01:00
common usb: define USB_SPEED_SUPER_PLUS speed for SuperSpeedPlus USB3.1 devices 2016-09-07 08:32:39 +02:00
core USB: Accept bulk endpoints with 1024-byte maxpacket 2018-05-16 10:06:49 +02:00
dwc2 usb: dwc2: Fix interval type issue 2018-05-30 07:49:12 +02:00
dwc3 usb: dwc3: Update DWC_usb31 GTXFIFOSIZ reg fields 2018-05-30 07:49:11 +02:00
early
gadget usb: gadget: composite: fix incorrect handling of OS desc requests 2018-05-30 07:49:13 +02:00
host xhci: zero usb device slot_id member when disabling and freeing a xhci slot 2018-05-30 07:49:12 +02:00
image
isp1760 usb: isp1760: udc: add ep capabilities support 2015-08-04 12:26:55 -05:00
misc usb: ldusb: add PIDs for new CASSY devices supported by this driver 2018-02-28 10:17:23 +01:00
mon usb: usbmon: Read text within supplied buffer size 2018-03-18 11:17:53 +01:00
musb usb: musb: call pm_runtime_{get,put}_sync before reading vbus registers 2018-05-30 07:49:03 +02:00
phy usb: phy: msm add regulator dependency 2018-02-25 11:03:51 +01:00
renesas_usbhs usb: renesas_usbhs: missed the "running" flag in usb_dmac with rx path 2018-02-28 10:17:23 +01:00
serial USB: serial: option: adding support for ublox R410M 2018-05-16 10:06:49 +02:00
storage USB: ene_usb6250: fix SCSI residue overwriting 2018-04-13 19:50:07 +02:00
usbip usbip: usbip_host: fix bad unlock balance during stub_probe() 2018-05-26 08:48:52 +02:00
wusbcore USB: wusbcore: fix NULL-deref at probe 2017-03-30 09:35:17 +02:00
Kconfig
Makefile usb-host: Remove fusbh200 driver 2015-10-16 23:44:33 -07:00
README
usb-skeleton.c

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.