linux-uconsole/drivers/usb
William Wu d6dc21d7de usb: dwc3: support global Tx/Rx threshold control
According to "TX/RX Data FIFO Sizes and TX/RX Threshold Control
Register Settings" section in the DWC SuperSpeed USB 3.0 Controller
User Guide, for large latency systems, it may cause unnecessary
performance reduction, and having large TX/RX FIFOs alone is not
sufficient, to solve this issue, the controller provides a packet
threshold feature in the host mode.

For example, on rk3399 platforms, if we set aclk_perilp to 100 MHz,
the system usb bus latency is larger than 2.2 microseconds to access
a 1024-byte packet, to avoid underrun and overrun during the burst,
threshold and burst size control must be set through GTXTHRCFG and
GRXTHRCFG registers.

On rk3399 platforms, only a 4-packet TX FIFO and 3-packet RX FIFO
is implemented due to area constraints, so we can program the USB
Maximum TX Burst Size to 13 and the USB Transmit Packet Count to
4 to avoid TX FIFO underrun during an OUT burst. Similarly, set the
USB Maximum TX Burst Size to 10 and the USB Transmit Packet Count
to 2 to avoid RX FIFO overrrun. To enable the threshold control,
add "snps,gtx-threshold-cfg = <4>, <13>" in dts dwc3 node for Tx,
add "snps,grx-threshold-cfg = <2>, <10>" in dts dwc3 node for Rx.

Change-Id: I7535fe72e6527544a20c5921440b4888e1bada22
Signed-off-by: William Wu <william.wu@rock-chips.com>
2018-08-28 11:09:44 +08:00
..
atm
c67x00
chipidea usb: chipidea: properly handle host or gadget initialization failure 2018-04-13 19:50:07 +02:00
class usb: cdc_acm: Add quirk for Uniden UBC125 scanner 2018-07-11 16:03:46 +02:00
common
core LSK 18.07 v4.4-android 2018-08-03 10:09:13 +08:00
dwc2 usb: dwc2: gadget: fix frame overrun issue 2018-07-27 17:19:06 +08:00
dwc3 usb: dwc3: support global Tx/Rx threshold control 2018-08-28 11:09:44 +08:00
dwc_otg_310 usb: dwc_otg_310: do not clear nak when prepare for setup packet 2018-08-02 19:21:39 +08:00
early
gadget usb: gadget: uvc: fix bFrameIndex of streaming interface descriptor 2018-08-02 19:21:39 +08:00
host LSK 18.07 v4.4-android 2018-08-03 10:09:13 +08:00
image
isp1760
misc USB: yurex: fix out-of-bounds uaccess in read handler 2018-07-17 11:31:43 +02:00
mon usb: usbmon: Read text within supplied buffer size 2018-03-18 11:17:53 +01:00
musb usb: musb: fix remote wakeup racing with suspend 2018-07-03 11:21:24 +02:00
phy UPSTREAM: usb: gadget: move gadget API functions to udc-core 2018-04-27 10:27:04 +08:00
renesas_usbhs usb: renesas_usbhs: missed the "running" flag in usb_dmac with rx path 2018-02-28 10:17:23 +01:00
serial LSK 18.07 v4.4-android 2018-08-03 10:09:13 +08:00
storage usb: uas: Add JMicron JMS583 and CHIPFANCIER to unusual device 2018-08-27 19:41:44 +08:00
usbip usbip: usbip_host: fix bad unlock balance during stub_probe() 2018-05-26 08:48:52 +02:00
wusbcore
Kconfig
Makefile
README
usb-skeleton.c

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.