linux-uconsole/drivers/pinctrl/qcom
Lina Iyer a59c2b6675 FROMLIST: drivers: pinctrl: msm: setup GPIO chip in hierarchy
Some GPIOs are marked as wakeup capable and are routed to another
interrupt controller that is an always-domain and can detect interrupts
even most of the SoC is powered off. The wakeup interrupt controller
wakes up the GIC and replays the interrupt at the GIC.

Setup the TLMM irqchip in hierarchy with the wakeup interrupt controller
and ensure the wakeup GPIOs are handled correctly.

Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Signed-off-by: Lina Iyer <ilina@codeaurora.org>

BUG: 141169320
TEST: Build and boot

Change-Id: Ic37caf65e5d384234d8197d27b3d62cefa2bea7f
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://patchwork.kernel.org/patch/11145345
2019-10-24 15:31:30 +00:00
..
Kconfig This is the bulk of pin control changes for the v5.4 kernel 2019-09-19 14:19:33 -07:00
Makefile pinctrl: qcom: Add SC7180 pinctrl driver 2019-08-07 14:43:51 +02:00
pinctrl-apq8064.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 2019-06-05 17:36:37 +02:00
pinctrl-apq8084.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 2019-06-05 17:36:37 +02:00
pinctrl-ipq4019.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 2019-06-05 17:36:37 +02:00
pinctrl-ipq8064.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 2019-06-05 17:36:37 +02:00
pinctrl-ipq8074.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 2019-06-05 17:36:37 +02:00
pinctrl-mdm9615.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 2019-06-05 17:36:37 +02:00
pinctrl-msm.c FROMLIST: drivers: pinctrl: msm: setup GPIO chip in hierarchy 2019-10-24 15:31:30 +00:00
pinctrl-msm.h FROMLIST: drivers: pinctrl: msm: setup GPIO chip in hierarchy 2019-10-24 15:31:30 +00:00
pinctrl-msm8x74.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 2019-06-05 17:36:37 +02:00
pinctrl-msm8660.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 2019-06-05 17:36:37 +02:00
pinctrl-msm8916.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 2019-06-05 17:36:37 +02:00
pinctrl-msm8960.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 2019-06-05 17:36:37 +02:00
pinctrl-msm8994.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 2019-06-05 17:36:37 +02:00
pinctrl-msm8996.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 2019-06-05 17:36:37 +02:00
pinctrl-msm8998.c pinctrl: msm8998: Squash TSIF pins together 2019-07-29 23:28:57 +02:00
pinctrl-qcs404.c This is the bulk of pin control changes for the v5.1 kernel cycle. 2019-03-11 11:12:50 -07:00
pinctrl-qdf2xxx.c pinctrl: qdf2xxx: Switch to use device_property_count_uXX() 2019-08-05 12:01:45 +02:00
pinctrl-sc7180.c pinctrl: qcom: Add SC7180 pinctrl driver 2019-08-07 14:43:51 +02:00
pinctrl-sdm660.c pinctrl: sdm660: Set tile property for pingroups 2018-11-19 15:40:55 +01:00
pinctrl-sdm845.c pinctrl: qcom: sdm845: Fix UFS_RESET pin 2019-09-04 15:23:22 +02:00
pinctrl-sm8150.c pinctrl: qcom: Add SM8150 pinctrl driver 2019-07-04 09:47:13 +02:00
pinctrl-spmi-gpio.c This is the bulk of pin control changes for the v5.4 kernel 2019-09-19 14:19:33 -07:00
pinctrl-spmi-mpp.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 2019-06-05 17:36:37 +02:00
pinctrl-ssbi-gpio.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 2019-06-05 17:36:37 +02:00
pinctrl-ssbi-mpp.c pinctrl: Remove dev_err() usage after platform_get_irq() 2019-08-05 13:24:06 +02:00