This series of changes improves probing devices with ti-sysc to the
point where we can now probe most devices without the custom dts
property "ti,hwmods" and no legacy platform data :)
We add support for platform data callbacks for idling and unidling the
clockdomain the module belongs to. The rest of the series mostly adds
handling for the various quirks needed by old legacy modules such as
i2c and watchdog. Some quirk handling is still missing for few modules,
but those will be added as they get tested.
The related platform data and dts changes will be sent separately.
-----BEGIN PGP SIGNATURE-----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=Fxul
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.3/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/drivers
ti-sysc interconnect target module driver changes for v5.3
This series of changes improves probing devices with ti-sysc to the
point where we can now probe most devices without the custom dts
property "ti,hwmods" and no legacy platform data :)
We add support for platform data callbacks for idling and unidling the
clockdomain the module belongs to. The rest of the series mostly adds
handling for the various quirks needed by old legacy modules such as
i2c and watchdog. Some quirk handling is still missing for few modules,
but those will be added as they get tested.
The related platform data and dts changes will be sent separately.
* tag 'omap-for-v5.3/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
bus: ti-sysc: Add support for module specific reset quirks
bus: ti-sysc: Detect uarts also on omap34xx
bus: ti-sysc: Do rstctrl reset handling in two phases
bus: ti-sysc: Add support for disabling module without legacy mode
bus: ti-sysc: Set ENAWAKEUP if available
bus: ti-sysc: Handle swsup idle mode quirks
bus: ti-sysc: Handle clockactivity for enable and disable
bus: ti-sysc: Enable interconnect target module autoidle bit on enable
bus: ti-sysc: Allow QUIRK_LEGACY_IDLE even if legacy_mode is not set
bus: ti-sysc: Make OCP reset work for sysstatus and sysconfig reset bits
bus: ti-sysc: Support 16-bit writes too
bus: ti-sysc: Add support for missing clockdomain handling
ARM: dts: dra71x: Disable usb4_tm target module
ARM: dts: dra71x: Disable rtc target module
ARM: dts: dra76x: Disable usb4_tm target module
ARM: dts: dra76x: Disable rtc target module
ARM: dts: dra76x: Update MMC2_HS200_MANUAL1 iodelay values
ARM: dts: am57xx-idk: Remove support for voltage switching for SD card
bus: ti-sysc: Handle devices with no control registers
ARM: dts: Configure osc clock for d_can on am335x
Signed-off-by: Olof Johansson <olof@lixom.net>
for 5.3, please pull the following:
- Markus provides a set of updates to the DPFE driver to support a new
revision of the API to the firmware (version 3) and provides minor fixes
about how the MR4-8 words are read for LPDDR4 devices
- Florian removes a print of a virtual address in brcmstb_gisb.c
-----BEGIN PGP SIGNATURE-----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=Gw/Z
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.3/drivers' of https://github.com/Broadcom/stblinux into arm/drivers
This pull request contains Broadcom ARM/ARM64/MIPS SoCs drivers changes
for 5.3, please pull the following:
- Markus provides a set of updates to the DPFE driver to support a new
revision of the API to the firmware (version 3) and provides minor fixes
about how the MR4-8 words are read for LPDDR4 devices
- Florian removes a print of a virtual address in brcmstb_gisb.c
* tag 'arm-soc/for-5.3/drivers' of https://github.com/Broadcom/stblinux:
memory: brcmstb: dpfe: introduce DPFE API v3
memory: brcmstb: dpfe: prepare for API-dependent sysfs attributes
memory: brcmstb: dpfe: prepare support for multiple API versions
memory: brcmstb: dpfe: wait for DCPU to be ready
memory: brcmstb: dpfe: report firmware loading error
memory: brcmstb: dpfe: remove unused code and fix formatting
bus: brcmstb_gisb: Remove print of base address
memory: brcmstb: dpfe: use byte 3 of registers MR4-MR8
memory: brcmstb: dpfe: optimize generic_show()
memory: brcmstb: dpfe: use msleep() over udelay()
Signed-off-by: Olof Johansson <olof@lixom.net>
Since commit 85f1abe001 ("kthread, sched/wait: Fix kthread_parkme()
completion issue"), kthreads that are bound to a CPU must be parked
before being stopped. At the moment the PSCI checker calls
kthread_stop() directly on the suspend kthread, which triggers the
following warning:
[ 6.068288] WARNING: CPU: 1 PID: 1 at kernel/kthread.c:398 __kthread_bind_mask+0x20/0x78
...
[ 6.190151] Call trace:
[ 6.192566] __kthread_bind_mask+0x20/0x78
[ 6.196615] kthread_unpark+0x74/0x80
[ 6.200235] kthread_stop+0x44/0x1d8
[ 6.203769] psci_checker+0x3bc/0x484
[ 6.207389] do_one_initcall+0x48/0x260
[ 6.211180] kernel_init_freeable+0x2c8/0x368
[ 6.215488] kernel_init+0x10/0x100
[ 6.218935] ret_from_fork+0x10/0x1c
[ 6.222467] ---[ end trace e05e22863d043cd3 ]---
kthread_unpark() tries to bind the thread to its CPU and aborts with a
WARN() if the thread wasn't in TASK_PARKED state. Park the kthreads
before stopping them.
Fixes: 85f1abe001 ("kthread, sched/wait: Fix kthread_parkme() completion issue")
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Now that jedec_ddr_data.c was moved from lib/ to drivers/memory/,
<memory/jedec_ddr.h> is included only from drivers/memory/.
Make it a local header of drivers/memory/.
The directory include/memory is now gone.
While I am here, I also changed #include <linux/module.h> to
<linux/export.h>. Because CONFIG_DDR is bool, jedec_ddr_data.c is
never compiled as a module.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
jedec_ddr_data.c exports 3 symbols, and all of them are only
referenced from drivers/memory/{emif.c,of_memory.c}
drivers/memory/ is a better location than lib/.
I removed the Kconfig prompt "JEDEC DDR data" because it is only
select'ed by TI_EMIF, and there is no other user. There is no good
reason in making it a user-configurable CONFIG option.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
-----BEGIN PGP SIGNATURE-----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=5Q83
-----END PGP SIGNATURE-----
Merge tag 'tee-maint-for-5.3' of https://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers
Adding mailing list for TEE subsystem
* tag 'tee-maint-for-5.3' of https://git.linaro.org/people/jens.wiklander/linux-tee:
MAINTAINERS: Add mailing list for the TEE subsystem
Signed-off-by: Olof Johansson <olof@lixom.net>
DPAA2 Console driver
- Add driver to export two char devices to dump logs for MC and
AIOP
DPAA2 DPIO driver
- Add support for memory backed QBMan portals
- Increase the timeout period to prevent false error
- Add APIs to retrieve QBMan portal probing status
DPAA Qman driver
- Only make liodn fixup on powerpc SoCs with PAMU iommu
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEhb3UXAyxp6UQ0v6khtxQDvusFVQFAlzjAJMACgkQhtxQDvus
FVQzBg/+Jmi8XNWxxIT+2MOKnEKZMiWwo9X+g4e3ZpwtoLujb9PaIAu3bY9Svhpj
w2v6xUE8fNH1rlRcRQLLxW+v7ziruCx4iM2D6BKw1xgf8eu0ob4R1b+0bTgfSa9S
xmHrNwgaTers7dB57ehYOq6PlExz0/wjU5hkPjhWMUkvA6RNAxDiZbexF0q21CYE
T3dNA2v6sBuWqbtl6dzx+N884P7gLTuHMDJfcdFPTu+4I5YGJBnG6ZoM6YSLP5Pf
i/sh57E7T3Zo4T0ysDDIndf1IssTOmmSxy+eTV1oCWBBSdD3m/zzb8Qw5ohMyGOI
AMhrkMYOGKpwShCbtzKvfz4DYQhTj9YjTqO+G+EMuVEiPIvN+jkevsdub4+0q7BL
q3Lo1T36JQ4RriI6m/csZIWju1LRNW0TQw8vLOAoOaLCOWEpNgGPxYFmqFiDqoNN
8PKC3BkH9BRJo8s9phMqWiqFb7RYegiGUsCrfIDU4x2uyyWAW2uAYQxFOfW+Mc+h
7/IonbApaS7uspn+CZFGp4TtXcbakbNoWgETf+b7zKJGrDqgWi2ErLHWxt1J3n54
waJnGlMlrafGdXqBVZNvuAvqmHD0BNzkck4c3ht+z4M96fw0K38EgWVgKfayElaK
EiX/55HmejQ6aoqNvrv7NZrg/2o5Vcly7C9RtPj3aHMbIdyiQ7k=
=C+f6
-----END PGP SIGNATURE-----
Merge tag 'soc-fsl-next-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/drivers
NXP/FSL SoC driver updates for v5.3
DPAA2 Console driver
- Add driver to export two char devices to dump logs for MC and
AIOP
DPAA2 DPIO driver
- Add support for memory backed QBMan portals
- Increase the timeout period to prevent false error
- Add APIs to retrieve QBMan portal probing status
DPAA Qman driver
- Only make liodn fixup on powerpc SoCs with PAMU iommu
* tag 'soc-fsl-next-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
soc: fsl: qbman_portals: add APIs to retrieve the probing status
soc: fsl: qman: fixup liodns only on ppc targets
soc: fsl: dpio: Add support for memory backed QBMan portals
bus: mc-bus: Add support for mapping shareable portals
soc: fsl: dpio: Increase timeout for QBMan Management Commands
soc: fsl: add DPAA2 console support
Documentation: DT: Add entry for DPAA2 console
soc: fsl: guts: Add definition for LX2160A
Signed-off-by: Olof Johansson <olof@lixom.net>
LS1028A used 1/2 periperhal clock as one reference clock.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This patch is to set the sd clock divisor value above 3 in tuning mode
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
With both the direct-addressed and indirect-addressed CCW paths
simplified to this point, the amount of shared code between them is
(hopefully) more easily visible. Move the processing of IDA-specific
bits into the direct-addressed path, and add some useful commentary of
what the individual pieces are doing. This allows us to remove the
entire ccwchain_fetch_idal() routine and maintain a single function
for any non-TIC CCW.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-10-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Also, because there is no need to save the file dentries, remove them
from the host-specific structure and just recursively delete the
directory that the driver created, when shutting down.
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This is purely deck furniture, to help understand the merge of the
direct and indirect handlers.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-9-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Now that both CCW codepaths build this nested array:
ccwchain->pfn_array_table[1]->pfn_array[#idaws/#pages]
We can collapse this into simply:
ccwchain->pfn_array[#idaws/#pages]
Let's do that, so that we don't have to continually navigate two
nested arrays when the first array always has a count of one.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-8-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Now that pfn_array_table[] is always an array of 1, it seems silly to
check for the very first entry in an array in the middle of two nested
loops, since we know it'll only ever happen once.
Let's move this outside the loops to simplify things, even though
the "k" variable is still necessary.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-7-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
While processing a channel program, we currently have two nested
arrays that carry a slightly different structure. The direct CCW
path creates this:
ccwchain->pfn_array_table[1]->pfn_array[#pages]
while an IDA CCW creates:
ccwchain->pfn_array_table[#idaws]->pfn_array[1]
The distinction appears to state that each pfn_array_table entry
points to an array of contiguous pages, represented by a pfn_array,
um, array. Since the direct-addressed scenario can ONLY represent
contiguous pages, it makes the intermediate array necessary but
difficult to recognize. Meanwhile, since an IDAL can contain
non-contiguous pages and there is no logic in vfio-ccw to detect
adjacent IDAWs, it is the second array that is necessary but appearing
to be superfluous.
I am not aware of any documentation that states the pfn_array[] needs
to be of contiguous pages; it is just what the code does today.
I don't see any reason for this either, let's just flip the IDA
codepath around so that it generates:
ch_pat->pfn_array_table[1]->pfn_array[#idaws]
This will bring it in line with the direct-addressed codepath,
so that we can understand the behavior of this memory regardless
of what type of CCW is being processed. And it means the casual
observer does not need to know/care whether the pfn_array[]
represents contiguous pages or not.
NB: The existing vfio-ccw code only supports 4K-block Format-2 IDAs,
so that "#pages" == "#idaws" in this area. This means that we will
have difficulty with this overlap in terminology if support for
Format-1 or 2K-block Format-2 IDAs is ever added. I don't think that
this patch changes our ability to make that distinction.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-6-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
It is now pretty apparent that ccwchain_handle_ccw()
(nee ccwchain_handle_tic()) does everything that cp_init()
wants to do.
Let's remove that duplicated code from cp_init() and let
ccwchain_handle_ccw() handle it itself.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-5-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Refactor ccwchain_handle_tic() into a routine that handles a channel
program address (which itself is a CCW pointer), rather than a CCW pointer
that is only a TIC CCW. This will make it easier to reuse this code for
other CCW commands.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-4-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Extract the "does the target of this TIC already exist?" check from
ccwchain_handle_tic(), so that it's easier to refactor that function
into one that cp_init() is able to use.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-3-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The routine cp_free() does nothing but call cp_unpin_free(), and while
most places call cp_free() there is one caller of cp_unpin_free() used
when the cp is guaranteed to have not been marked initialized.
This seems like a dubious way to make a distinction, so let's combine
these routines and make cp_free() do all the work.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-2-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
SDIO IRQ is triggered by low level. It need disable SDIO IRQ
detected function. Otherwise the interrupt register can't be cleared.
It will process the interrupt more.
Signed-off-by: Jjian Zhou <jjian.zhou@mediatek.com>
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Signed-off-by: Yong Mao <yong.mao@mediatek.com>
Fixes: 5215b2e952 ("mmc: mediatek: Add MMC_CAP_SDIO_IRQ support")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Stratix 10 PCIe controller does not support Type 1 to Type 0 conversion
as previous version (V1) does so the PCIe controller configuration
mechanism needs to send Type 0 config TLP if the target bus number
matches with the secondary bus number.
Implement a function to form a TLP header that depends on the PCIe
controller version, so that the header can be formed according to
specific host controller HW internals, fixing the type conversion issue.
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
[lorenzo.pieralisi@arm.com: commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
We don't have a reproducible error case, yet our BSP team suggested that
the mmc_switch_status() command in mmc_select_hs400() should come after
the callback into the driver completing HS400 setup. It makes sense to
me because we want the status of a fully setup HS400, so it will
increase the reliability of the mmc_switch_status() command.
Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Fixes: ba6c7ac3a2 ("mmc: core: more fine-grained hooks for HS400 tuning")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Bring PHY support for the Armada8k driver.
The Armada8k IP only supports x1, x2 or x4 link widths. Iterate over
the DT 'phys' entries and configure them one by one. Use
phy_set_mode_ext() to make use of the submode parameter (initially
introduced for Ethernet modes). For PCI configuration, let the submode
be the width (1, 2, 4, etc) so that the PHY driver knows how many
lanes are bundled. Do not error out in case of error for compatibility
reasons.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If the cache line size is greater than ARCH_DMA_MINALIGN (128),
the warning shows and it's tainted as TAINT_CPU_OUT_OF_SPEC.
However, it's not good because as discussed in the thread [1], the cpu
cache line size will be problem only on non-coherent devices.
Since the coherent flag is already introduced to struct device,
show the warning only if the device is non-coherent device and
ARCH_DMA_MINALIGN is smaller than the cpu cache size.
[1] https://lore.kernel.org/linux-arm-kernel/20180514145703.celnlobzn3uh5tc2@localhost/
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Tested-by: Zhang Lei <zhang.lei@jp.fujitsu.com>
[catalin.marinas@arm.com: removed 'if' block for WARN_TAINT]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Because RISC-V compliant implementations can cache invalid entries
in TLB, an SFENCE.VMA is necessary after changes to the page table.
This patch adds an SFENCE.vma for the vmalloc_fault path.
Signed-off-by: ShihPo Hung <shihpo.hung@sifive.com>
[paul.walmsley@sifive.com: reversed tab->whitespace conversion,
wrapped comment lines]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-riscv@lists.infradead.org
Cc: stable@vger.kernel.org
Since raw_cpu_xchg() doesn't need to be IRQ-safe, like
this_cpu_xchg(), we can use a simple load-store instead of the cmpxchg
loop.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Nadav reported that code-gen changed because of the this_cpu_*()
constraints, avoid this for select_idle_cpu() because that runs with
preemption (and IRQs) disabled anyway.
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Nadav reported that since the this_cpu_*() ops got asm-volatile
constraints on, code generation suffered for do_IRQ(), but since this
is all with IRQs disabled we can use __this_cpu_*().
smp_x86_platform_ipi 234 222 -12,+0
smp_kvm_posted_intr_ipi 74 66 -8,+0
smp_kvm_posted_intr_wakeup_ipi 86 78 -8,+0
smp_apic_timer_interrupt 292 284 -8,+0
smp_kvm_posted_intr_nested_ipi 74 66 -8,+0
do_IRQ 195 187 -8,+0
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
My @arm.com address will stop working at the end of August, so update to
my @kernel.org address where you'll still be able to reach me.
When I say "stop working" I really mean "will go to my line manager", so
send patches there at your peril because they may reply with roadmaps
and spreadsheets. You have been warned.
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: arm-soc <arm@kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Tom Vaden reported false failure of the check_msr() function, because
some servers can do POST tracing and enable LBR tracing during
bootup.
Kan confirmed that check_msr patch was to fix a bug report in
guest, so it's ok to disable it for real HW.
Reported-by: Tom Vaden <tom.vaden@hpe.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tom Vaden <tom.vaden@hpe.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Liang Kan <kan.liang@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190616141313.GD2500@krava
[ Readability edits. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It's preffered to use group's ->is_visible callback, so
we do not need to use condition attribute assignment.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190524132152.GB26617@krava
Signed-off-by: Ingo Molnar <mingo@kernel.org>
IMC uncore unit can only be accessed via MMIO on Snow Ridge.
The MMIO space of IMC uncore is at the specified offsets from the
MEM0_BAR. Add snr_uncore_get_mc_dev() to locate the PCI device with
MMIO_BASE and MEM0_BAR register.
Add new ops to access the IMC registers via MMIO.
Add 3 new free running counters for clocks, read and write bandwidth.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: eranian@google.com
Link: https://lkml.kernel.org/r/1556672028-119221-7-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The client IMC block is accessed by MMIO. Current code uses an informal
way to access the block, which is not recommended.
Clean up the code by using __iomem annotation and the accessor
functions (read[lq]()).
Move exit_box() and read_counter() to generic code, which can be shared
with the server code later.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: eranian@google.com
Link: https://lkml.kernel.org/r/1556672028-119221-6-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A new MMIO type uncore box is introduced on Snow Ridge server. The
counters of MMIO type uncore box can only be accessed by MMIO.
Add a new uncore type, uncore_mmio_uncores, for MMIO type uncore blocks.
Support MMIO type uncore blocks in CPU hot plug. The MMIO space has to
be map/unmap for the first/last CPU. The context also need to be
migrated if the bind CPU changes.
Add mmio_init() to init and register PMUs for MMIO type uncore blocks.
Add a helper to calculate the box_ctl address.
The helpers which calculate ctl/ctr can be shared with PCI type uncore
blocks.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: eranian@google.com
Link: https://lkml.kernel.org/r/1556672028-119221-5-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
For uncore box which can only be accessed by MSR, its reference
box->refcnt is updated in CPU hot plug. The uncore boxes need to be
initalized and exited accordingly for the first/last CPU of a socket.
Starts from Snow Ridge server, a new type of uncore box is introduced,
which can only be accessed by MMIO. The driver needs to map/unmap
MMIO space for the first/last CPU of a socket.
Extract the codes of box ref/unref and init/exit for reuse later.
There is no functional change.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: eranian@google.com
Link: https://lkml.kernel.org/r/1556672028-119221-4-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The uncore subsystem on Snow Ridge is similar as previous SKX server.
The uncore units on Snow Ridge include Ubox, Chabox, IIO, IRP, M2PCIE,
PCU, M2M, PCIE3 and IMC.
- The config register encoding and pci device IDs are changed.
- For CHA, the umask_ext and filter_tid fields are changed.
- For IIO, the ch_mask and fc_mask fields are changed.
- For M2M, the mask_ext field is changed.
- Add new PCIe3 unit for PCIe3 root port which provides the interface
between PCIe devices, plugged into the PCIe port, and the components
(in M2IOSF).
- IMC can only be accessed via MMIO on Snow Ridge now. Current common
code doesn't support it yet. IMC will be supported in following
patches.
- There are 9 free running counters for IIO CLOCKS and bandwidth In.
- Full uncore event list is not published yet. Event constrain is not
included in this patch. It will be added later separately.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: eranian@google.com
Link: https://lkml.kernel.org/r/1556672028-119221-3-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Counting with invalid event coding for free-running counter may cause
OOPs, e.g. uncore_iio_free_running_0/event=1/.
Current code only validate the event with free-running event format,
event=0xff,umask=0xXY. Non-free-running event format never be checked
for the PMU with free-running counters.
Add generic hw_config() to check and reject the invalid event coding
for free-running PMU.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: eranian@google.com
Fixes: 0f519f0352 ("perf/x86/intel/uncore: Support IIO free-running counters on SKX")
Link: https://lkml.kernel.org/r/1556672028-119221-2-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add new model number for Icelake desktop and server to perf.
The data source encoding for Icelake server is the same as Skylake
server.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@alien8.de
Cc: qiuxu.zhuo@intel.com
Cc: rui.zhang@intel.com
Cc: tony.luck@intel.com
Link: https://lkml.kernel.org/r/20190603134122.13853-2-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The code in pci_dev_keep_suspended() is relatively hard to follow due
to the negative checks in it and in its callers and the function has
a possible side-effect (disabling the PME) which doesn't really match
its role.
For this reason, move the PME disabling from pci_dev_keep_suspended()
to a separate function and change the semantics (and name) of the
rest of it, so that 'true' is returned when the device needs to be
resumed (and not the other way around). Change the callers of
pci_dev_keep_suspended() accordingly.
While at it, make the code flow in pci_pm_poweroff() reflect the
pci_pm_suspend() more closely to avoid arbitrary differences between
them.
This is a cosmetic change with no intention to alter behavior.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
The current code resumes devices in D3hot during system suspend if
the target power state for them is D3cold, but that is not necessary
in general. It only is necessary to do that if the platform firmware
requires the device to be resumed, but that should be covered by
the platform_pci_need_resume() check anyway, so rework
pci_dev_keep_suspended() to avoid returning 'false' for devices
in D3hot which need not be resumed due to platform firmware
requirements.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
The upper bits of the count field is used as reader count. When
sufficient number of active readers are present, the most significant
bit will be set and the count becomes negative. If the number of active
readers keep on piling up, we may eventually overflow the reader counts.
This is not likely to happen unless the number of bits reserved for
reader count is reduced because those bits are need for other purpose.
To prevent this count overflow from happening, the most significant
bit is now treated as a guard bit (RWSEM_FLAG_READFAIL). Read-lock
attempts will now fail for both the fast and slow paths whenever this
bit is set. So all those extra readers will be put to sleep in the wait
list. Wakeup will not happen until the reader count reaches 0.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: huang ying <huang.ying.caritas@gmail.com>
Link: https://lkml.kernel.org/r/20190520205918.22251-17-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
