Attach GR3D to the displays IOMMU group in order to provide GR3D access
to BO's IOVA.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Attach GR2D to the display IOMMU group in order to provide GR2D access
to BO's IOVA.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Remove unneeded iommu_group_get() and add missing iommu_group_put(),
correcting IOMMU group refcount. This is a minor correction / cleanup that
doesn't really fix anything because Tegra's IOMMU driver are built-in and
hence groups refcounting can't hold IOMMU driver from unloading.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Some VSP instances have two blending units named BRU (Blend/ROP Unit)
and BRS (Blend/ROP Sub unit). The BRS is a smaller version of the BRU
with only two inputs, but otherwise offers similar features and offers
the same register interface. The BRU and BRS can be used exchangeably in
VSP pipelines (provided no more than two inputs are needed).
Due to historical reasons, the VSP1 driver implements support for both
the BRU and BRS through objects named vsp1_bru. The code uses the name
BRU to refer to either the BRU or the BRS, except in a few places where
noted explicitly. This creates confusion.
In an effort to avoid confusion, rename the vsp1_bru object and the
corresponding API to vsp1_brx, and use BRx to refer to blend unit
instances regardless of their type. The names BRU and BRS are retained
where reference to a particular blend unit type is needed, as well as in
hardware registers to stay close to the datasheet.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Dynamic assignment of the BRU and BRS to pipelines is prone to
regressions, add messages to make debugging easier. Keep it as a
separate commit to ease removal of those messages once the code will
deem to be completely stable.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The VSPDL variant drives two DU channels through two LIF and two
blenders, BRU and BRS. The DU channels thus share the five available
VSPDL inputs and expose them as five KMS planes.
The current implementation assigns the BRS to the second LIF and thus
artificially limits the number of planes for the second display channel
to two at most.
Lift this artificial limitation by assigning the BRU and BRS to the
display pipelines on demand based on the number of planes used by each
pipeline. When a display pipeline needs more than two inputs and the BRU
is already in use by the other pipeline, this requires reconfiguring the
other pipeline to free the BRU before processing, which can result in
frame drop on both pipelines.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
When disabling a DRM plane, the corresponding RPF is only marked as
removed from the pipeline in the atomic update handler, with the actual
removal happening when configuring the pipeline at atomic commit time.
This is required as the RPF has to be disabled in the hardware, which
can't be done from the atomic update handler.
The current implementation is RPF-specific. Make it independent of the
entity type by using the entity's pipe pointer to mark removal from the
pipeline. This will allow using the mechanism to remove BRU instances.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Display list completion is already reported to the frame end handler,
but that mechanism is global to all display lists. In order to implement
BRU and BRS reassignment in DRM pipelines we will need to commit a
display list and wait for its completion internally, without reporting
it to the DRM driver. Extend the display list API to support such an
internal use of the display list.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
We will soon need to return more than a boolean completion status from
the vsp1_dlm_irq_frame_end() IRQ handler. Turn the return value into a
bitfield to prepare for that. No functional change is introduced here.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
In order to make the vsp1_du_setup_lif() easier to read, and for
symmetry with the DRM pipeline input setup, move the pipeline output
setup code to a separate function.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The vsp1_du_setup_lif() function sets up the DRM pipeline input
manually. This duplicates the code from the
vsp1_du_pipeline_setup_inputs() function. Replace the manual
implementation by a call to the function.
As the pipeline has no enabled input in vsp1_du_setup_lif(), the
vsp1_du_pipeline_setup_inputs() function will not setup any RPF, and
will thus not setup formats on the BRU sink pads. This isn't a problem
as all inputs are disabled, and the BRU sink pads will be reconfigured
from the atomic commit handler when inputs will be enabled.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
To implement fully dynamic plane assignment to pipelines, we need to
reassign the BRU and BRS to the DRM pipelines in the atomic commit
handler. In preparation for this setup factor out the BRU source pad
code and call it both at LIF setup and atomic commit time.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The DRM pipeline setup code used at atomic commit time is similar to the
setup code used when enabling the pipeline. Move it to a separate
function in order to share it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Move the duplicated DRM pipeline configuration code to a function and
call it from vsp1_du_setup_lif() and vsp1_du_atomic_flush().
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The DRM pipeline handling code uses the entity's pipe list head to check
whether the entity is already included in a pipeline. This method is a
bit fragile in the sense that it uses list_empty() on a list_head that
is a list member. Replace it by a simpler check for the entity pipe
pointer.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Various types of objects subclassing vsp1_entity currently store a
pointer to the pipeline. Move the pointer to vsp1_entity to simplify the
code and avoid storing the pipeline in more entity subclasses later.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The vsp1_drm_pipeline enabled field is set but never used. Remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
MT7622's hardware default value of vendor ID and class type is not correct,
fix that by setup the correct values before linkup with Endpoint.
Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Ryder Lee <ryder.lee@mediatek.com>
The DRM support code manages a pipeline of VSP entities, each backed by
a media entity. When starting or stopping the pipeline, it starts and
stops the media pipeline through the media API in order to store the
pipeline pointer in every entity.
The driver doesn't use the pipe pointer in media entities, neither does
it rely on the other effects of the media_pipeline_start() and
media_pipeline_stop() functions. Furthermore, as the media links for the
DRM pipeline are never set up correctly, and as the pipeline can be
modified dynamically when enabling or disabling planes, the current
implementation is not correct. Remove the incorrect and unneeded code.
While at it remove the outdated comment that states that entities are
not started when the LIF is setup, as they now are.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Use the USBTV_TV_STD define instead of repeating ourselves.
Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Depending on the chosen standard, configure the decoder to use the
appropriate color encoding standard (PAL-like, NTSC-like or SECAM).
Until now, the decoder was not configured for a specific color standard,
making it autodetect the color encoding.
While this may sound fine, it potentially causes the wrong image tuning
parameters to be applied (e.g. tuning parameters for NTSC are applied to
a PAL source), and may confuse users about what the actual standard is
in use.
This commit explicitly configures the color standard the decoder will
use, making it visually obvious if a wrong standard was chosen.
Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The user-supplied norm value gets overwritten by the generic .norm
member from the norm_params. That way, we lose the specific norm the
user may want to set.
For instance, if the user specifies V4L2_STD_PAL_60, the value actually
used will be V4L2_STD_525_60, which in the end will be as if the user
had specified V4L2_STD_NTSC, since this is always the first bitfield we
match the norm value against before configuring the hardware.
The norm_params array is only there to match a norm with an output
resolution. The norm value itself should not be changed.
Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Make use of the V4L2_STD_525_60 and V4L2_STD_625_50 defines to
determine the vertical resolution to use when capturing.
V4L2_STD_525_60 (resp. V4L2_STD_625_50) is the set of standards using
525 (resp. 625) lines per frame, independently of the color encoding.
Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add support for the SECAM norm, using the "AVSECAM" decoder configuration
sequence found in Windows driver's .INF file.
For reference, the "AVSECAM" sequence in the .INF file is:
0x04,0x73,0xDC,0x72,0xA2,0x90,0x35,0x01,0x30,0x04,0x08,0x2D,0x28,0x08,
0x02,0x69,0x16,0x35,0x21,0x16,0x36
Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Re-format the register {address, value} pairs so they follow the same
order as the decoder configuration sequences in the Windows driver's .INF
file.
For instance, for PAL, the "AVPAL" sequence in the .INF file is:
0x04,0x68,0xD3,0x72,0xA2,0xB0,0x15,0x01,0x2C,0x10,0x20,0x2e,0x08,0x02,
0x02,0x59,0x16,0x35,0x17,0x16,0x36
Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
There are several thermal sensors that only have a low-speed bus
interface but output valid video data. This patchset enables support
for the AMG88xx "Grid-Eye" sensor family.
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
[hans.verkuil@cisco.com: split up int ret = ...->xfer(); line]
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Define the device tree bindings for the panasonic,amg88xx i2c
video driver.
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This is Open Firmware driver, hence 'of_device.h' should be included
instead of 'platform_device.h'. Right now OF headers happen to be included
indirectly and this may break in the future, so let's correct the header.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Do not handle interrupts if we haven't asked for them, potentially that
could happen if HW wasn't programmed properly.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Stride of U/V planes must be aligned to 16 bytes (2 macroblocks). This
needs to be taken into account, otherwise it is possible to get a silent
memory corruption if dmabuf size is less than the size of decoded video
frame.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Make all strings single line to make them grep'able and add a comment
to the memory barrier.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
I've noticed that decoding fails sometime if size of bitstream buffer
isn't aligned to 16K, probably because HW fetches data from memory in
a 16K granularity and if the last chunk of data isn't aligned, HW reads
garbage data beyond the dmabuf and tries to parse it.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Following commit f773568b6f ("drm/i915: nuke the duplicated stolen
discovery"), the if-else-chain for determining the GTT size is redundant
with the !chv branches all being the same.
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
References: f773568b6f ("drm/i915: nuke the duplicated stolen discovery")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180503212956.3948-1-chris@chris-wilson.co.uk
From now on, I'll start using my @kernel.org as my development e-mail.
As such, let's remove the entries that point to the old
mchehab@s-opensource.com at MAINTAINERS file.
For the files written with a copyright with mchehab@s-opensource,
let's keep Samsung on their names, using mchehab+samsung@kernel.org,
in order to keep pointing to my employer, with sponsors the work.
For the files written before I join Samsung (on July, 4 2013),
let's just use mchehab@kernel.org.
For bug reports, we can simply point to just kernel.org, as
this will reach my mchehab+samsung inbox anyway.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Brian Warner <brian.warner@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Fix inconsistent IS_ERR and PTR_ERR in imx_csi_probe.
The proper pointer to be passed as argument is pinctrl
instead of priv->vdev.
This issue was detected with the help of Coccinelle.
Fixes: 52e17089d1 ("media: imx: Don't initialize vars that won't be used")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are quite a few code snippet like the following in verifier:
subprog_start = 0;
if (env->subprog_cnt == cur_subprog + 1)
subprog_end = insn_cnt;
else
subprog_end = env->subprog_info[cur_subprog + 1].start;
The reason is there is no marker in subprog_info array to tell the end of
it.
We could resolve this issue by introducing a faked "ending" subprog.
The special "ending" subprog is with "insn_cnt" as start offset, so it is
serving as the end mark whenever we iterate over all subprogs.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
It is better to centre all subprog information fields into one structure.
This structure could later serve as function node in call graph.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Currently, verifier treat main prog and subprog differently. All subprogs
detected are kept in env->subprog_starts while main prog is not kept there.
Instead, main prog is implicitly defined as the prog start at 0.
There is actually no difference between main prog and subprog, it is better
to unify them, and register all progs detected into env->subprog_starts.
This could also help simplifying some code logic.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Using drm_atomic_get_private_obj_state() after state has been swapped
will return old state.
Fixes: 0281c41490 ("drm/tegra: hub: Use private object for global state")
Signed-off-by: Stefan Schake <stschake@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
We want to add more DRM selftests, and there's not much point in
having a Kconfig option for every single one of them, so make
a generic one.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180503112217.37292-5-maarten.lankhorst@linux.intel.com
[mlankhorst: Fix i915/Kconfig.debug (ickle)]
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
With the previous patch drm_atomic_helper_check_plane_state correctly
calculates clipping and the xf86-video-intel ddx is fixed to fall back
to GPU correctly when SetPlane fails, we can remove the hack where
we try to pan/zoom when out of min/max scaling range. This was already
poor behavior where the screen didn't show what was requested, and now
instead we reject it outright. This simplifies check_sprite_plane a lot.
Changes since v1:
- Set crtc_h to the height correctly.
- Reject < 3x3 rectangles instead of making them invisible for <gen9.
For gen9+ skl_update_scaler_plane will reject them.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180503112217.37292-4-maarten.lankhorst@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Document the R-Car V3H (R8A77980) SoC in the R-Car PCIe bindings.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Rob Herring <robh@kernel.org>
rcar_pcie_hw_init_{h1|gen2|gen3}() only differ in the PCIe PHY init code
and all end with a call to rcar_pcie_hw_init(), thus it makes sense to
move that call into the driver's probe() method and then rename those
functions to rcar_pcie_phy_init_{h1|gen2|gen3}().
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Commit 7ed1c1901f (tools: fix cross-compile var clobbering) removed
setting of LD to $(CROSS_COMPILE)gcc. This broke build of acpica
(acpidump) in power/acpi:
ld: unrecognized option '-D_LINUX'
The tools pass CFLAGS to the linker (incl. -D_LINUX), so revert this
particular change and let LD be $(CC) again. Note that the old behaviour
was a bit different, it used $(CROSS_COMPILE)gcc which was eliminated by
the commit 7ed1c1901f. We use $(CC) for that reason.
Fixes: 7ed1c1901f (tools: fix cross-compile var clobbering)
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: 4.16+ <stable@vger.kernel.org> # 4.16+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On R-Car gen3 SoCs the PCIe PHY has its own register region, thus we
need to add the corresponding code in rcar_pcie_hw_init_gen3() and call
devm_phy_optional_get() at the driver's probing time, so that the
existing R-Car gen3 device trees (not having a PHY node) would still
work (we only need to power up the PHY on R-Car V3H).
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Rob Herring <robh@kernel.org>
The U8540 was an evolved version of the U8500, but it was never
mass produced or put into products, only reference designs exist.
The upstream support was never completed and it is unlikely that
this will happen so drop the support for now to simplify
maintenance of the U8500.
Cc: Loic Pallardy <loic.pallardy@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Instead of relying on a scale which may increase rounding errors,
clip src by doing: src * (dst - clip) / dst and rounding the result
away from 1, so the new coordinates get closer to 1. We won't need
to fix up with a magic macro afterwards, because our scaling factor
will never go to the other side of 1.
Changes since v1:
- Adjust dst immediately, else drm_rect_width/height on dst gives bogus
results.
Change since v2:
- Get rid of macros and use 64-bits math.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[mlankhorst: Add Villes comment, and rename newsrc to tmp. (Ville)]
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180503112217.37292-3-maarten.lankhorst@linux.intel.com
