When thermal sensor is not yet enabled, reading temperature might return
random value. This might even result in stopping system booting when such
temperature is higher than the critical value. Fix this by checking if TMU
has been actually enabled before reading the temperature.
This change fixes booting of Exynos4210-based board with TMU enabled (for
example Samsung Trats board), which was broken since v4.4 kernel release.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: 9e4249b403 ("thermal: exynos: Fix first temperature read after registering sensor")
CC: stable@vger.kernel.org # v4.6+
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
This patch adds i.MX7 thermal sensor support, most
of the i.MX7 thermal sensor functions are same with
i.MX6 except the registers offset/layout, so we move
those registers offset/layout definitions to soc data
structure.
i.MX7 uses single calibration data @25C, the calibration
data is located at OCOTP offset 0x4F0, bit[17:9], the
formula is as below:
Tmeas = (Nmeas - n1) + 25; n1 is the fuse value for 25C.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Bai Ping <ping.bai@nxp.com>
Acked-by: Dong Aisheng <aisheng.dong@nxp.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
MT7622 SoC has built-in thermal controller with one sensing point, the
patch just is to extend the functionality of the existing logic.
Changes v1 -> v2: rebase to 4.16-rc1
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Shunli Wang <shunli.wang@mediatek.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Add devicetree bindings for MediaTek MT7622 thermal controller
Changes v1 -> v2: add tag from Rob
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Shunli Wang <shunli.wang@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
RTC driver should not be aware of the PWR registers offset and bits
position. Furthermore, we can imagine that DBP relative register and bit
mask could change depending on the SoC.
So this patch introduces 2 parameters, dbp_reg and dbp_mask, allowing to
get PWR_CR and PWR_CR_DBP from device tree. And it prepares next RTC
version, backup domain write protection is disabled only if needed.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
RTC driver should not be aware of the PWR registers offset and bits
position. Furthermore, we can imagine that Disable Backup Protection (DBP)
relative register and bit mask could change depending on the SoC. So this
patch moves st,syscfg property from single pwrcfg phandle to pwrcfg
phandle/offset/mask triplet.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
RTC alarm interrupt is active high and already configured by device tree.
So remove IRQF_TRIGGER_RISING from driver.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
This patch adds the device IDs to the device_channel_config array to
improve code readability.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The integration_time sysfs attribute did not report the correct
time. Changing the integration time would cause the reported lux to
change wildly. Once the integration time was corrected, all of the
equations, and lux tables needed to be corrected to match what the
data sheets expected. This patch corrects all of this, and adds some
more comments about how some of the constants were derived. Here are
the results from testing a TSL2772 hooked up to a Raspberry Pi 2:
# cat in_intensity0_integration_time
0.002730
# watch -n .1 cat in_illuminance0_input
; Lux hovers around 55
# echo 0.65 > in_intensity0_integration_time
# cat in_intensity0_integration_time
0.649740
# watch -n .1 cat in_illuminance0_input
; Lux hovers around 55 with noticeable lag to lux changes in watch
; process.
; Now test the ALS calibration routine.
# cat in_intensity0_calibbias
1000
# cat in_illuminance0_target_input
150
# echo 1 > in_illuminance0_calibrate
# cat in_intensity0_calibbias
2777
# watch -n .1 cat in_illuminance0_input
; Lux now hovers around 150-155
The returned lux values were tested on a TSL2772 in various lighting
conditions and the results are within the lux ranges described at
https://en.wikipedia.org/wiki/Lux.
The driver was primarily tested using a TSL2772, however some quick tests
were also ran against the devices TSL2771, TSL2572, and TMD2772.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The in_intensity0_calibscale_available sysfs attribute has code that
checks the device type to determine which calibration scales are
available. This check is not necessary since all of the supported
ALS device types use the scales 1 8 16 120. This patch converts the
sysfs attribute to use IIO_CONST_ATTR. The following device datasheets
were checked: tsl2571, tsl2771, tmd2771, tsl2572, tsl2772, tmd2772.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The calibscale_available attribute is currently associated with the
IIO_LIGHT channel but should be associated with the IIO_INTENSITY
channel. This patch corrects that association and it also corrects
lines that were unnecessarily split for the
in_intensity0_integration_time sysfs attribute.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The driver would expose to userspace the events directory even if the
interrupts were not configured. This patch changes the driver so that
the events directory is not exposed to user space if interrupts are
not configured. This patch also corrects the indentation of the
chan_table_elements and info structure members.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The sysfs attributes in_illuminance0_target_input,
in_illuminance0_calibrate, and in_proximity0_calibrate did not have
proper range checking in place so this patch adds the correct range
checks.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The summary text for the GPL is not needed since the SPDX identifier
is a legally binding shorthand that can be used instead.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Adding binding documentation for Texas Instruments DAC5571 Family
Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This patch adds support for the Texas Intruments DAC5571 Family.
Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Just some minor grammar/spelling fixes of things I noticed while reading
the code.
Signed-off-by: Martin Kelly <mkelly@xevo.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When in spi mode, we are setting i2c disable bit in user_ctrl
register. But the register is overwritten after when turning fifo
on. So save user_ctrl init value and always use it when updating
the register.
Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Implement generic skip first samples mechanism and use it to
filter out first sample when gyro is on.
The problem for these chips is that the first sample of the gyro
is out of specs, because gyro is not completely stabilized. To
ensure all data are within sensor specs, we just skip the first
sample when turning gyro on.
Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Detected by kernel circular locking dependency checker.
We are locking iio mutex (iio_device_claim_direct_mode) after
locking our internal mutex. But when the buffer starts, iio first
locks its mutex and then we lock our internal one.
To avoid possible deadlock, we need to use the same order
everwhere. So we change the ordering by locking first iio mutex,
then our internal mutex.
Fixes: 68cd6e5b20 ("iio: imu: inv_mpu6050: fix lock issues by using our own mutex")
Cc: stable@vger.kernel.org
Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
icm20608 does not have i2c aux bus, so it does not make sense to
allocate an i2c mux for this chip.
Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
ARM:
- Fix proxying of GICv2 CPU interface accesses
- Fix crash when switching to BE
- Track source vcpu git GICv2 SGIs
- Fix an outdated bit of documentation
x86:
- Speed up injection of expired timers (for stable)
-----BEGIN PGP SIGNATURE-----
iQEcBAABCAAGBQJa7s3kAAoJEED/6hsPKofojlwIAKQLt6GuAHTj7Gl+G4/EOOSk
bXSXracJSi3aQHTVdKaREo6iTpAB7/E/4yf+KLkljiqPO/YrWrlTnAbqfCfjqX6b
pWyXgoxPy4v+SEbhP+qiV/yC/HiuPJ4WZVmf5cCDXD4kPF03b7DvImGbZRbEwJNV
qlaO1QqmbbMU5m1I5oZCKn5/BLM3fwAFMn1RERFDOPyn3+HPwANRbnLsZ4q49KHw
W41Rj6i88qDQ3PrbgUCmSvuzboKwTiVUBltPlStk9A04F2toLytcMoo9fdzQOjwD
ZmvjYlLqNlxXFLUHHvhgOECvBTp879AWUrgoManQ16O1s/gApTcHdXpzKQBKjtE=
=I6Dd
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pll KVM fixes from Radim Krčmář:
"ARM:
- Fix proxying of GICv2 CPU interface accesses
- Fix crash when switching to BE
- Track source vcpu git GICv2 SGIs
- Fix an outdated bit of documentation
x86:
- Speed up injection of expired timers (for stable)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: remove APIC Timer periodic/oneshot spikes
arm64: vgic-v2: Fix proxying of cpuif access
KVM: arm/arm64: vgic_init: Cleanup reference to process_maintenance
KVM: arm64: Fix order of vcpu_write_sys_reg() arguments
KVM: arm/arm64: vgic: Fix source vcpu issues for GICv2 SGI
Fixes come with:
* Fix for compile warning in AMD IOMMU driver with irq remapping
disabled
* Fix for VT-d interrupt remapping and invalidation size (caused
a BUG_ON when trying to invalidate more than 4GB)
* Build fix and a regression fix for broken graphics with old
DTS for the rockchip iommu driver
* A revert in PCI window reservation code which fixes a
regression with VFIO.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=RGxK
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v4.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- fix a compile warning in the AMD IOMMU driver with irq remapping
disabled
- fix for VT-d interrupt remapping and invalidation size (caused a
BUG_ON when trying to invalidate more than 4GB)
- build fix and a regression fix for broken graphics with old DTS for
the rockchip iommu driver
- a revert in the PCI window reservation code which fixes a regression
with VFIO.
* tag 'iommu-fixes-v4.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu: rockchip: fix building without CONFIG_OF
iommu/vt-d: Use WARN_ON_ONCE instead of BUG_ON in qi_flush_dev_iotlb()
iommu/vt-d: fix shift-out-of-bounds in bug checking
iommu/dma: Move PCI window region reservation back into dma specific path.
iommu/rockchip: Make clock handling optional
iommu/amd: Hide unused iommu_table_lock
iommu/vt-d: Fix usage of force parameter in intel_ir_reconfigure_irte()
Pull x86 fix from Thomas Gleixner:
"Unbreak the CPUID CPUID_8000_0008_EBX reload which got dropped when
the evaluation of physical and virtual bits which uses the same CPUID
leaf was moved out of get_cpu_cap()"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Restore CPUID_8000_0008_EBX reload
Pull clocksource fixes from Thomas Gleixner:
"The recent addition of the early TSC clocksource breaks on machines
which have an unstable TSC because in case that TSC is disabled, then
the clocksource selection logic falls back to the early TSC which is
obviously bogus.
That also unearthed a few robustness issues in the clocksource
derating code which are addressed as well"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource: Rework stale comment
clocksource: Consistent de-rate when marking unstable
x86/tsc: Fix mark_tsc_unstable()
clocksource: Initialize cs->wd_list
clocksource: Allow clocksource_mark_unstable() on unregistered clocksources
x86/tsc: Always unregister clocksource_tsc_early
Pull irq fix from Thomas Gleixner:
"A single fix to prevent false positives in the spurious interrupt
detector when more than a single demultiplex register is evaluated in
the Qualcom irq combiner driver"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/qcom: Fix check for spurious interrupts
Derive topology information from Extended Topology Enumeration (CPUID
function 0xB) when the information is available.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1524865681-112110-3-git-send-email-suravee.suthikulpanit@amd.com
Current implementation does not communicate whether it can successfully
detect CPUID function 0xB information. Therefore, modify the function to
return success or error codes. This will be used by subsequent patches.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1524865681-112110-2-git-send-email-suravee.suthikulpanit@amd.com
Last Level Cache ID can be calculated from the number of threads sharing
the cache, which is available from CPUID Fn0x8000001D (Cache Properties).
This is used to left-shift the APIC ID to derive LLC ID.
Therefore, default to this method unless the APIC ID enumeration does not
follow the scheme.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1524864877-111962-5-git-send-email-suravee.suthikulpanit@amd.com
Since this file contains general cache-related information for x86,
rename the file to a more generic name.
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1524864877-111962-4-git-send-email-suravee.suthikulpanit@amd.com
Current logic iterates over CPUID Fn8000001d leafs (Cache Properties)
to detect the last level cache, and derive the last-level cache ID.
However, this information is already available in the cpu_llc_id.
Therefore, make use of it instead.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Link: http://lkml.kernel.org/r/1524864877-111962-3-git-send-email-suravee.suthikulpanit@amd.com
Move smp_num_siblings and cpu_llc_id to cpu/common.c so that they're
always present as symbols and not only in the CONFIG_SMP case. Then,
other code using them doesn't need ugly ifdeffery anymore. Get rid of
some ifdeffery.
Signed-off-by: Borislav Petkov <bpetkov@suse.de>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1524864877-111962-2-git-send-email-suravee.suthikulpanit@amd.com
Each of the strings that we want to put into the buf[MAX_FLAG_OPT_SIZE]
in flags_read() is two characters long. But the sprintf() adds
a trailing newline and will add a terminating NUL byte. So
MAX_FLAG_OPT_SIZE needs to be 4.
sprintf() calls vsnprintf() and *that* does return:
" * The return value is the number of characters which would
* be generated for the given input, excluding the trailing
* '\0', as per ISO C99."
Note the "excluding".
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20180427163707.ktaiysvbk3yhk4wm@agluck-desk
We missed a case in the Dell config dependencies resulting in a possible bad
configuration, resolve it by giving up on trying to keep DELL_LAPTOP visible in
the menu and make it depend on DELL_SMBIOS.
Fix a null pointer dereference at module unload for the asus-wireless driver.
The following is an automated git shortlog grouped by driver:
Kconfig:
- Fix dell-laptop dependency chain.
asus-wireless:
- Fix NULL pointer dereference
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJa7mGsAAoJEKbMaAwKp3640HIH/1L4oxTWcNtRy9wYyrrrZFEe
6ra6mOPYH+AnDOkL6/s19J+F0YEN3X75oebm1qH9tOJIPK5XWvONAuVnQ1sbR1LM
s0A0eSyL4TpqX8NkKJz2TkvWolgoSQ7fS875YqD4Wazi3ZuO03bRiWwiIjdfm+5v
cvAgtxVMw/gfk31IRd+ru2FeiY7lge4nlXecd20RTsWMRJcXDZG3Z48rQvx0Rx9w
dRWAha8Gh0SqKIbkPQgpvTTk19PsqZRDq7bhJTXBHoLJf/VyskL6xxzoypL5VI/L
HUZhc6Pnzzlmm4C3yz/FP9ugVYmFEO0Sz1P/Ged1ZnG5+fTMfB2ztQ25l2L0LrA=
=tMpT
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v4.17-2' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver fixes from Darren Hart:
- We missed a case in the Dell config dependencies resulting in a
possible bad configuration, resolve it by giving up on trying to keep
DELL_LAPTOP visible in the menu and make it depend on DELL_SMBIOS.
- Fix a null pointer dereference at module unload for the asus-wireless
driver.
* tag 'platform-drivers-x86-v4.17-2' of git://git.infradead.org/linux-platform-drivers-x86:
platform/x86: Kconfig: Fix dell-laptop dependency chain.
platform/x86: asus-wireless: Fix NULL pointer dereference
Here are some USB driver fixes for 4.17-rc4.
The majority of them are some USB gadget fixes that missed my last pull
request. The "largest" patch in here is a fix for the old visor driver
that syzbot found 6 months or so ago and I finally remembered to fix it.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWu4/Kw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykQrwCdFtLciG+1aDp5lDc8wzlOPdsUa5cAoK2f+7Je
stELc5F5nAEES/DMFG1c
=CDZC
-----END PGP SIGNATURE-----
Merge tag 'usb-4.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some USB driver fixes for 4.17-rc4.
The majority of them are some USB gadget fixes that missed my last
pull request. The "largest" patch in here is a fix for the old visor
driver that syzbot found 6 months or so ago and I finally remembered
to fix it.
All of these have been in linux-next with no reported issues"
* tag 'usb-4.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
Revert "usb: host: ehci: Use dma_pool_zalloc()"
usb: typec: tps6598x: handle block reads separately with plain-I2C adapters
usb: typec: tcpm: Release the role mux when exiting
USB: Accept bulk endpoints with 1024-byte maxpacket
xhci: Fix use-after-free in xhci_free_virt_device
USB: serial: visor: handle potential invalid device configuration
USB: serial: option: adding support for ublox R410M
usb: musb: trace: fix NULL pointer dereference in musb_g_tx()
usb: musb: host: fix potential NULL pointer dereference
usb: gadget: composite Allow for larger configuration descriptors
usb: dwc3: gadget: Fix list_del corruption in dwc3_ep_dequeue
usb: dwc3: gadget: dwc3_gadget_del_and_unmap_request() can be static
usb: dwc2: pci: Fix error return code in dwc2_pci_probe()
usb: dwc2: WA for Full speed ISOC IN in DDMA mode.
usb: dwc2: dwc2_vbus_supply_init: fix error check
usb: gadget: f_phonet: fix pn_net_xmit()'s return type
Since the commit "8003c9ae20: add APIC Timer periodic/oneshot mode VMX
preemption timer support", a Windows 10 guest has some erratic timer
spikes.
Here the results on a 150000 times 1ms timer without any load:
Before 8003c9ae20 | After 8003c9ae20
Max 1834us | 86000us
Mean 1100us | 1021us
Deviation 59us | 149us
Here the results on a 150000 times 1ms timer with a cpu-z stress test:
Before 8003c9ae20 | After 8003c9ae20
Max 32000us | 140000us
Mean 1006us | 1997us
Deviation 140us | 11095us
The root cause of the problem is starting hrtimer with an expiry time
already in the past can take more than 20 milliseconds to trigger the
timer function. It can be solved by forward such past timers
immediately, rather than submitting them to hrtimer_start().
In case the timer is periodic, update the target expiration and call
hrtimer_start with it.
v2: Check if the tsc deadline is already expired. Thank you Mika.
v3: Execute the past timers immediately rather than submitting them to
hrtimer_start().
v4: Rearm the periodic timer with advance_periodic_target_expiration() a
simpler version of set_target_expiration(). Thank you Paolo.
Cc: Mika Penttilä <mika.penttila@nextfour.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@blade-group.com>
8003c9ae20 ("KVM: LAPIC: add APIC Timer periodic/oneshot mode VMX preemption timer support")
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
- Fix proxying of GICv2 CPU interface accesses
- Fix crash when switching to BE
- Track source vcpu git GICv2 SGIs
- Fix an outdated bit of documentation
-----BEGIN PGP SIGNATURE-----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=cO6X
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-for-4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm
KVM/arm fixes for 4.17, take #2
- Fix proxying of GICv2 CPU interface accesses
- Fix crash when switching to BE
- Track source vcpu git GICv2 SGIs
- Fix an outdated bit of documentation
With commit ce88313069 ("arch/sh: make the DMA mapping
operations observe dev->dma_pfn_offset") the generic DMA allocation
function on which the SH 'dma_alloc_coherent()' function relies on,
accesses the 'dma_pfn_offset' field of struct device.
Unfortunately the 'dma_generic_alloc_coherent()' function is called from
several places with a NULL struct device argument, halting the CPU
during the boot process.
This patch fixes the issue by protecting access to dev->dma_pfn_offset,
with a trivial check for validity. It also passes a valid 'struct device'
in the 'platform_resource_setup_memory()' function which is the main user
of 'dma_alloc_coherent()', and inserts a WARN_ON() check to remind to future
(and existing) bogus users of this function to provide a valid 'struct device'
whenever possible.
Fixes: ce88313069 ("arch/sh: make the DMA mapping operations observe dev->dma_pfn_offset")
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Rich Felker <dalias@libc.org>
The sh asm/smp.h defines a fallback hard_smp_processor_id macro for
the !SMP case, but linux/smp.h never includes asm/smp.h in the !SMP
case.
Signed-off-by: Rich Felker <dalias@libc.org>
Just checking for ifdefs cause build issues as reported by
kernel test:
config: openrisc-allmodconfig (attached as .config)
compiler: or1k-linux-gcc (GCC) 6.0.0 20160327 (experimental)
All errors (new ones prefixed by >>):
drivers/video/fbdev/omap2/omapfb/omapfb-main.c: In function 'omapfb_init_connections':
>> drivers/video/fbdev/omap2/omapfb/omapfb-main.c:2396:8: error: implicit declaration of function 'omapdss_find_mgr_from_display' [-Werror=implicit-function-declaration]
mgr = omapdss_find_mgr_from_display(def_dssdev);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/video/fbdev/omap2/omapfb/omapfb-main.c:2396:6: warning: assignment makes pointer from integer without a cast [-Wint-conversion]
mgr = omapdss_find_mgr_from_display(def_dssdev);
^
drivers/video/fbdev/omap2/omapfb/omapfb-main.c: In function 'omapfb_find_default_display':
>> drivers/video/fbdev/omap2/omapfb/omapfb-main.c:2430:13: error: implicit declaration of function 'omapdss_get_default_display_name' [-Werror=implicit-function-declaration]
def_name = omapdss_get_default_display_name();
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/video/fbdev/omap2/omapfb/omapfb-main.c:2430:11: warning: assignment makes pointer from integer without a cast [-Wint-conversion]
def_name = omapdss_get_default_display_name();
^
So, use IS_ENABLED() instead.
Fixes: 771f7be87f ("media: omapfb: omapfb_dss.h: add stubs to build with COMPILE_TEST && DRM_OMAP")
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: tomi.valkeinen@ti.com
Cc: linux-omap@vger.kernel.org
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The recent "x86 ZONE_DMA love" discussion at LSF/MM pointed out that some
gspca sub-drivvers are using GFP_DMA to allocate buffers which are used
for USB bulk transfers, there is absolutely no need for this, drop it.
Cc: "Luis R. Rodriguez" <mcgrof@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This driver depends on sony-laptop driver, but this is available
only for x86. So, add a stub function, in order to allow building
it on non-x86 too.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This is the optimization for SPI drive current and
signal lock condition check part for BER/PER measure
to ensure BER/PER are stable
Signed-off-by: Yasunari Takiguchi <Yasunari.Takiguchi@sony.com>
Signed-off-by: Masayuki Yamamoto <Masayuki.Yamamoto@sony.com>
Signed-off-by: Hideki Nozawa <Hideki.Nozawa@sony.com>
Signed-off-by: Kota Yonezawa <Kota.Yonezawa@sony.com>
Signed-off-by: Toshihiko Matsumoto <Toshihiko.Matsumoto@sony.com>
Signed-off-by: Satoshi Watanabe <Satoshi.C.Watanabe@sony.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
