commit e10038a8ec upstream.
This structure is not exposed to userspace, so fix this by defining
struct sk_filter; so we skip the casting in kernelspace. This is safe
since userspace has no way to lurk with that internal pointer.
Fixes: e6f30c7 ("netfilter: x_tables: add xt_bpf match")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a sysctl that causes an interface's optimistic addresses
to be considered equivalent to other non-deprecated addresses
for source address selection purposes. Preferred addresses
will still take precedence over optimistic addresses, subject
to other ranking in the source address selection algorithm.
This is useful where different interfaces are connected to
different networks from different ISPs (e.g., a cell network
and a home wifi network).
The current behaviour complies with RFC 3484/6724, and it
makes sense if the host has only one interface, or has
multiple interfaces on the same network (same or cooperating
administrative domain(s), but not in the multiple distinct
networks case.
For example, if a mobile device has an IPv6 address on an LTE
network and then connects to IPv6-enabled wifi, while the wifi
IPv6 address is undergoing DAD, IPv6 connections will try use
the wifi default route with the LTE IPv6 address, and will get
stuck until they time out.
Also, because optimistic nodes can receive frames, issue
an RTM_NEWADDR as soon as DAD starts (with the IFA_F_OPTIMSTIC
flag appropriately set). A second RTM_NEWADDR is sent if DAD
completes (the address flags have changed), otherwise an
RTM_DELADDR is sent.
Also: add an entry in ip-sysctl.txt for optimistic_dad.
[cherry-pick of net-next 7fd2561e4e]
Signed-off-by: Erik Kline <ek@google.com>
Acked-by: Lorenzo Colitti <lorenzo@google.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bug: 17769720
Change-Id: Ic7e50781c607e1f3a492d9ce7395946efb95c533
Applying restrictive seccomp filter programs to large or diverse
codebases often requires handling threads which may be started early in
the process lifetime (e.g., by code that is linked in). While it is
possible to apply permissive programs prior to process start up, it is
difficult to further restrict the kernel ABI to those threads after that
point.
This change adds a new seccomp syscall flag to SECCOMP_SET_MODE_FILTER for
synchronizing thread group seccomp filters at filter installation time.
When calling seccomp(SECCOMP_SET_MODE_FILTER, SECCOMP_FILTER_FLAG_TSYNC,
filter) an attempt will be made to synchronize all threads in current's
threadgroup to its new seccomp filter program. This is possible iff all
threads are using a filter that is an ancestor to the filter current is
attempting to synchronize to. NULL filters (where the task is running as
SECCOMP_MODE_NONE) are also treated as ancestors allowing threads to be
transitioned into SECCOMP_MODE_FILTER. If prctrl(PR_SET_NO_NEW_PRIVS,
...) has been set on the calling thread, no_new_privs will be set for
all synchronized threads too. On success, 0 is returned. On failure,
the pid of one of the failing threads will be returned and no filters
will have been applied.
The race conditions against another thread are:
- requesting TSYNC (already handled by sighand lock)
- performing a clone (already handled by sighand lock)
- changing its filter (already handled by sighand lock)
- calling exec (handled by cred_guard_mutex)
The clone case is assisted by the fact that new threads will have their
seccomp state duplicated from their parent before appearing on the tasklist.
Holding cred_guard_mutex means that seccomp filters cannot be assigned
while in the middle of another thread's exec (potentially bypassing
no_new_privs or similar). The call to de_thread() may kill threads waiting
for the mutex.
Changes across threads to the filter pointer includes a barrier.
Based on patches by Will Drewry.
Suggested-by: Julien Tinnes <jln@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
This adds the new "seccomp" syscall with both an "operation" and "flags"
parameter for future expansion. The third argument is a pointer value,
used with the SECCOMP_SET_MODE_FILTER operation. Currently, flags must
be 0. This is functionally equivalent to prctl(PR_SET_SECCOMP, ...).
In addition to the TSYNC flag later in this patch series, there is a
non-zero chance that this syscall could be used for configuring a fixed
argument area for seccomp-tracer-aware processes to pass syscall arguments
in the future. Hence, the use of "seccomp" not simply "seccomp_add_filter"
for this syscall. Additionally, this syscall uses operation, flags,
and user pointer for arguments because strictly passing arguments via
a user pointer would mean seccomp itself would be unable to trivially
filter the seccomp syscall itself.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
Conflicts:
arch/x86/syscalls/syscall_32.tbl
arch/x86/syscalls/syscall_64.tbl
include/uapi/asm-generic/unistd.h
kernel/seccomp.c
And fixup of unistd32.h to truly enable sys_secomp.
Change-Id: I95bea02382c52007d22e5e9dc563c7d055c2c83f
kvm_ioctl_create_device currently has knowledge of all the device types
and their associated ops. This is fairly inflexible when adding support
for new in-kernel device emulations, so move what we currently have out
into a table, which can support dynamic registration of ops by new
drivers for virtual hardware.
Cc: Alex Williamson <Alex.Williamson@redhat.com>
Cc: Alex Graf <agraf@suse.de>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit d60eacb070)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
The idea between capabilities and the KVM_CHECK_EXTENSION ioctl is that
userspace can, at run-time, determine if a feature is supported or not.
This allows KVM to being supporting a new feature with a new kernel
version without any need to update user space. Unfortunately, since the
definition of KVM_CAP_USER_NMI was guarded by #ifdef
__KVM_HAVE_USER_NMI, such discovery still required a user space update.
Therefore, unconditionally export KVM_CAP_USER_NMI and change the
the typo in the comment for the IOCTL number definition as well.
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 44b5ce73c9)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
The idea between capabilities and the KVM_CHECK_EXTENSION ioctl is that
userspace can, at run-time, determine if a feature is supported or not.
This allows KVM to being supporting a new feature with a new kernel
version without any need to update user space. Unfortunately, since the
definition of KVM_CAP_READONLY_MEM was guarded by #ifdef
__KVM_HAVE_READONLY_MEM, such discovery still required a user space
update.
Therefore, unconditionally export KVM_CAP_READONLY_MEM and change the
in-kernel conditional to rely on __KVM_HAVE_READONLY_MEM.
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 0f8a4de3e0)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
The KVM_CHECK_EXTENSION is only available on the kvm fd today. Unfortunately
on PPC some of the capabilities change depending on the way a VM was created.
So instead we need a way to expose capabilities as VM ioctl, so that we can
see which VM type we're using (HV or PR). To enable this, add the
KVM_CHECK_EXTENSION ioctl to our vm ioctl portfolio.
Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 92b591a4c4)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Highlight the aspects of the ioctls that are actually specific to x86
and ia64. As defined restrictions (irqchip) and mp states may not apply
to other architectures, these parts are flagged to belong to x86 and ia64.
In preparation for the use of KVM_(S|G)ET_MP_STATE by s390.
Fix a spelling error (KVM_SET_MP_STATE vs. KVM_SET_MPSTATE) on the way.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
(cherry picked from commit 0b4820d6d8)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Currently, we don't have an exit reason to notify user space about
a system-level event (for e.g. system reset or shutdown) triggered
by the VCPU. This patch adds exit reason KVM_EXIT_SYSTEM_EVENT for
this purpose. We can also inform user space about the 'type' and
architecture specific 'flags' of a system-level event using the
kvm_run structure.
This newly added KVM_EXIT_SYSTEM_EVENT will be used by KVM ARM/ARM64
in-kernel PSCI v0.2 support to reset/shutdown VMs.
Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit 8ad6b63492)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
We need a common place to share PSCI related defines among ARM kernel,
ARM64 kernel, KVM ARM/ARM64 PSCI emulation, and user space.
We introduce uapi/linux/psci.h for this purpose. This newly added
header will be first used by KVM ARM/ARM64 in-kernel PSCI emulation
and user space (i.e. QEMU or KVMTOOL).
Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit e546eea74e)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
User space (i.e. QEMU or KVMTOOL) should be able to check whether KVM
ARM/ARM64 supports in-kernel PSCI v0.2 emulation. For this purpose, we
define KVM_CAP_ARM_PSCI_0_2 in KVM user space interface header.
Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit 717abd208d)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Support creating the ARM VGIC device through the KVM_CREATE_DEVICE
ioctl, which can then later be leveraged to use the
KVM_{GET/SET}_DEVICE_ATTR, which is useful both for setting addresses in
a more generic API than the ARM-specific one and is useful for
save/restore of VGIC state.
Adds KVM_CAP_DEVICE_CTRL to ARM capabilities.
Note that we change the check for creating a VGIC from bailing out if
any VCPUs were created, to bailing out if any VCPUs were ever run. This
is an important distinction that shouldn't break anything, but allows
creating the VGIC after the VCPUs have been created.
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit 7330672bef)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
So far we've succeeded at making KVM and VFIO mostly unaware of each
other, but areas are cropping up where a connection beyond eventfds
and irqfds needs to be made. This patch introduces a KVM-VFIO device
that is meant to be a gateway for such interaction. The user creates
the device and can add and remove VFIO groups to it via file
descriptors. When a group is added, KVM verifies the group is valid
and gets a reference to it via the VFIO external user interface.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit ec53500fae)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Add a kvm ioctl which states which system functionality kvm emulates.
The format used is that of CPUID and we return the corresponding CPUID
bits set for which we do emulate functionality.
Make sure ->padding is being passed on clean from userspace so that we
can use it for something in the future, after the ioctl gets cast in
stone.
s/kvm_dev_ioctl_get_supported_cpuid/kvm_dev_ioctl_get_cpuid/ while at
it.
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 9c15bb1d0a)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
For implementing CPU=host, we need a mechanism for querying
preferred VCPU target type on underlying Host.
This patch implements KVM_ARM_PREFERRED_TARGET vm ioctl which
returns struct kvm_vcpu_init instance containing information
about preferred VCPU target type and target specific features
available for it.
Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit 42c4e0c77a)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Wire the init of a 32bit vcpu by allowing 32bit modes in pstate,
and providing sensible defaults out of reset state.
This feature is of course conditioned by the presence of 32bit
capability on the physical CPU, and is checked by the KVM_CAP_ARM_EL1_32BIT
capability.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit 0d854a60b1)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Provide 64bit system register handling, modeled after the cp15
handling for ARM.
Reviewed-by: Christopher Covington <cov@codeaurora.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit 7c8c5e6a91)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
On AArch64, audit is supported through generic lib/audit.c and
compat_audit.c, and so this patch adds arch specific definitions required.
Acked-by Will Deacon <will.deacon@arm.com>
Acked-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Conflicts:
arch/arm64/Kconfig
include/uapi/linux/audit.h
Change-Id: Ia6d7b25786843d43191e67d514928e3ecba11e2f
Applying restrictive seccomp filter programs to large or diverse
codebases often requires handling threads which may be started early in
the process lifetime (e.g., by code that is linked in). While it is
possible to apply permissive programs prior to process start up, it is
difficult to further restrict the kernel ABI to those threads after that
point.
This change adds a new seccomp syscall flag to SECCOMP_SET_MODE_FILTER for
synchronizing thread group seccomp filters at filter installation time.
When calling seccomp(SECCOMP_SET_MODE_FILTER, SECCOMP_FILTER_FLAG_TSYNC,
filter) an attempt will be made to synchronize all threads in current's
threadgroup to its new seccomp filter program. This is possible iff all
threads are using a filter that is an ancestor to the filter current is
attempting to synchronize to. NULL filters (where the task is running as
SECCOMP_MODE_NONE) are also treated as ancestors allowing threads to be
transitioned into SECCOMP_MODE_FILTER. If prctrl(PR_SET_NO_NEW_PRIVS,
...) has been set on the calling thread, no_new_privs will be set for
all synchronized threads too. On success, 0 is returned. On failure,
the pid of one of the failing threads will be returned and no filters
will have been applied.
The race conditions against another thread are:
- requesting TSYNC (already handled by sighand lock)
- performing a clone (already handled by sighand lock)
- changing its filter (already handled by sighand lock)
- calling exec (handled by cred_guard_mutex)
The clone case is assisted by the fact that new threads will have their
seccomp state duplicated from their parent before appearing on the tasklist.
Holding cred_guard_mutex means that seccomp filters cannot be assigned
while in the middle of another thread's exec (potentially bypassing
no_new_privs or similar). The call to de_thread() may kill threads waiting
for the mutex.
Changes across threads to the filter pointer includes a barrier.
Based on patches by Will Drewry.
Suggested-by: Julien Tinnes <jln@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
This adds the new "seccomp" syscall with both an "operation" and "flags"
parameter for future expansion. The third argument is a pointer value,
used with the SECCOMP_SET_MODE_FILTER operation. Currently, flags must
be 0. This is functionally equivalent to prctl(PR_SET_SECCOMP, ...).
In addition to the TSYNC flag later in this patch series, there is a
non-zero chance that this syscall could be used for configuring a fixed
argument area for seccomp-tracer-aware processes to pass syscall arguments
in the future. Hence, the use of "seccomp" not simply "seccomp_add_filter"
for this syscall. Additionally, this syscall uses operation, flags,
and user pointer for arguments because strictly passing arguments via
a user pointer would mean seccomp itself would be unable to trivially
filter the seccomp syscall itself.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
Conflicts:
arch/x86/syscalls/syscall_32.tbl
arch/x86/syscalls/syscall_64.tbl
include/uapi/asm-generic/unistd.h
kernel/seccomp.c
Change-Id: Id7a365079829fd9164315dec75d6ee415c29b176
* What
This provides an interface for issuing an FITRIM which uses the
secure discard instead of just a discard.
Only the eMMC command is "secure", and not how the FS uses it:
due to the fact that the FS might reassign a region somewhere else,
the original deleted data will not be affected by the "trim" which only
handles un-used regions.
So we'll just call it "deep discard", and note that this is a
"best effort" cleanup.
* Why
Once in a while, We want to be able to cleanup most of the unused blocks
after erasing a bunch of files.
We don't want to constantly secure-discard via a mount option.
From an eMMC spec perspective, it tells the device to really get rid of
all the data for the specified blocks and not just put them back into the
pool of free ones (unlike the normal TRIM). The eMMC spec says the
secure trim handling must make sure the data (and metadata) is not available
anymore. A simple TRIM doesn't clear the data, it just puts blocks in the
free pool.
JEDEC Standard No. 84-A441
7.6.9 Secure Erase
7.6.10 Secure Trim
From an FS perspective, it is acceptable to leave some data behind.
- directory entries related to deleted files
- databases entries related to deleted files
- small-file data stored in inode extents
- blocks held by the FS waiting to be re-used (mitigated by sync).
- blocks reassigned by the FS prior to FIDTRIM.
Change-Id: I676a1404a80130d93930c84898360f2e6fb2f81e
Signed-off-by: Geremy Condra <gcondra@google.com>
Signed-off-by: JP Abgrall <jpa@google.com>
This contains the following commits:
1. cc2f522 net: core: Add a UID range to fib rules.
2. d7ed2bd net: core: Use the socket UID in routing lookups.
3. 2f9306a net: core: Add a RTA_UID attribute to routes.
This is so that userspace can do per-UID route lookups.
4. 8e46efb net: ipv6: Use the UID in IPv6 PMTUD
IPv4 PMTUD already does this because ipv4_sk_update_pmtu
uses __build_flow_key, which includes the UID.
Bug: 15413527
Change-Id: I81bd31dae655de9cce7d7a1f9a905dc1c2feba7c
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Based on commit d3fd06d0259232e1362c6d1da136970d26628467
Author: Johannes Berg <johannes.berg@intel.com>
Date: Sat Jan 25 10:17:18 2014 -0800
nl80211: vendor command support
Change-Id: I832eb4da295fe7b2c9bd8ff69ae80fe7bfe30add
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
