Add MICBIAS property to the optional devicetree bindings.
Signed-off-by: Bogdan Togorean <bogdan.togorean@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add this SFR compatible definition for the sam9x60 SoC. Will be needed
in OHCI driver: ohci-at91.c.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This change fixes a typo in the dt-binding examples (reset_gpio ->
reset-gpios).
Even though 'reset-gpio' is a valid construct for gpiolib the naming
'reset-gpios' is more suited for dt-bindings documentation.
Signed-off-by: Bogdan Togorean <bogdan.togorean@analog.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for active discharge for USB power switches.
Signed-off-by: pascal paillet <p.paillet@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Regulator high pull down are enabled by default so remove support in the
driver.
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The interrupt parent description is not needed as the parent is a parent
node with 'interrupt-controller' property.
Signed-off-by: pascal paillet <p.paillet@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The LM96000 is a temperature sensor and fan controller based
on the LM85.
Signed-off-by: Jeremy Gebben <jgebben@sweptlaser.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
By default, ina3221, as a hardware monitor, continuously measures
the inputs and generates corresponding data. However, for battery
powered devices, this mode might be power consuming.
This patch adds a "ti,single-shot" property to allow changing the
default continuous mode to single-shot operating mode.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Bindings for Delta Electronics DPS-650-AB power supply.
Signed-off-by: Xiaoting Liu <xiaoting.liu@hxt-semitech.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add bindings documentation for i.MX7 media drivers.
The imx7 MIPI CSI2 and imx7 CMOS Sensor Interface.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Allwinner A64 CSI is a single channel time-multiplexed BT.656
protocol interface.
Add separate compatible string for A64 since it require explicit
change in sun6i_csi driver to update default CSI_SCLK rate.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlxqHJYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGWl8H/jPI4EipzD2GbnjZ
GaFpMBBjcXBaVmoA+Y69so+7BHx1Ql+5GQtqbK0RHJRb9qEPLw3FBhHNjM/N8Sgf
nSrK+GnBZp9s+k/NR/Yf2RacUR3jhz+Q9JEoQd3u9bFUeQyvE8Rf3vgtoBBwFOfz
+t7N1memYVF3asLGWB4e4sP1YVMGfseTQpSPojvM30YWM86Bv+QtSx1AGgHczQIM
kMKealR8ZPelN6JAXgLhQ5opDojBrE4YKB98pwsMDI6abz0Tz2JLFEUTTxsv5XNN
o/Iz+XDoylskEyxN2unNWfHx7Swkvoklog8J/hDg5XlTvipL/WkT66PHBgcGMNvj
BW9GgU8=
=ZizU
-----END PGP SIGNATURE-----
Merge tag 'v5.0-rc7' into patchwork
Linux 5.0-rc7
* tag 'v5.0-rc7': (1667 commits)
Linux 5.0-rc7
Input: elan_i2c - add ACPI ID for touchpad in Lenovo V330-15ISK
Input: st-keyscan - fix potential zalloc NULL dereference
Input: apanel - switch to using brightness_set_blocking()
powerpc/64s: Fix possible corruption on big endian due to pgd/pud_present()
efi/arm: Revert "Defer persistent reservations until after paging_init()"
arm64, mm, efi: Account for GICv3 LPI tables in static memblock reserve table
sunrpc: fix 4 more call sites that were using stack memory with a scatterlist
include/linux/module.h: copy __init/__exit attrs to init/cleanup_module
Compiler Attributes: add support for __copy (gcc >= 9)
lib/crc32.c: mark crc32_le_base/__crc32c_le_base aliases as __pure
auxdisplay: ht16k33: fix potential user-after-free on module unload
x86/platform/UV: Use efi_runtime_lock to serialise BIOS calls
i2c: bcm2835: Clear current buffer pointers and counts after a transfer
i2c: cadence: Fix the hold bit setting
drm: Use array_size() when creating lease
dm thin: fix bug where bio that overwrites thin block ignores FUA
Revert "exec: load_script: don't blindly truncate shebang string"
Revert "gfs2: read journal in large chunks to locate the head"
net: ethernet: freescale: set FEC ethtool regs version
...
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
LPASS_Audio_Wrapper_AON clock is on by default. Remove
it from lpass clock list to avoid voting for it.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlxqHJYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGWl8H/jPI4EipzD2GbnjZ
GaFpMBBjcXBaVmoA+Y69so+7BHx1Ql+5GQtqbK0RHJRb9qEPLw3FBhHNjM/N8Sgf
nSrK+GnBZp9s+k/NR/Yf2RacUR3jhz+Q9JEoQd3u9bFUeQyvE8Rf3vgtoBBwFOfz
+t7N1memYVF3asLGWB4e4sP1YVMGfseTQpSPojvM30YWM86Bv+QtSx1AGgHczQIM
kMKealR8ZPelN6JAXgLhQ5opDojBrE4YKB98pwsMDI6abz0Tz2JLFEUTTxsv5XNN
o/Iz+XDoylskEyxN2unNWfHx7Swkvoklog8J/hDg5XlTvipL/WkT66PHBgcGMNvj
BW9GgU8=
=ZizU
-----END PGP SIGNATURE-----
Merge v5.0-rc7 into drm-next
Backmerging for nouveau and imx that needed some fixes for next pulls.
Signed-off-by: Dave Airlie <airlied@redhat.com>
- support for a new variant of pca953x
- documentation fix from Wolfram
- some tegra186 name changes
- two minor fixes for madera and altera-a10sr
-----BEGIN PGP SIGNATURE-----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=nV64
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.1-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into devel
gpio updates for v5.1
- support for a new variant of pca953x
- documentation fix from Wolfram
- some tegra186 name changes
- two minor fixes for madera and altera-a10sr
Add ABEOZ9 to the list of trivial RTCs
Signed-off-by: Artem Panfilov <panfilov.artyom@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add a driver for the MicroCrystal RV-3028. It is a SMT Real-Time Clock
Module that incorporates an integrated CMOS circuit together with an XTAL.
It has an i2c interface.
The driver handles date/time, alarms, trickle charging, timestamping,
frequency offset correction, EEPROM and NVRAM.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Since this documents multiple chips controlled by the isl1208 driver,
name it isil,isl1208.txt, as the convention is to use the base driver
name in the bindings document for drivers with multiple devices.
Include all chips supported by this driver in the docs. Make it
clear which properties apply to which chips.
Expand documentation for existing isil,evienb property to explain
operation in more detail. Existing docs just describe it in terms of
setting a bit in a register.
CC: Alessandro Zummo <a.zummo@towertech.it>
CC: Alexandre Belloni <alexandre.belloni@bootlin.com>
CC: Rob Herring <robh+dt@kernel.org>
CC: Mark Rutland <mark.rutland@arm.com>
CC: devicetree@vger.kernel.org
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Refer to touchscreen.txt for generic touch properties. This avoids
duplication and we're using the generic code to parse these in the
driver. While at that add touchscreen-size-{x,y} which are respected by
the driver as well.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This is required to specify generic touchscreen properties via DT.
Signed-off-by: Matthias Fend <matthias.fend@wolfvision.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Contains a few DT updates on top of part 1 of the pull:
- MSMC RAM support (on-chip SRAM)
- Main system control module support
- USB support
- ADC support
There is an extra dt-binding update included, which has been acked
by Rob.
-----BEGIN PGP SIGNATURE-----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=L6dq
-----END PGP SIGNATURE-----
Merge tag 'am654-for-v5.1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into HEAD
AM654x SoC updates for v5.1 (part 2)
Contains a few DT updates on top of part 1 of the pull:
- MSMC RAM support (on-chip SRAM)
- Main system control module support
- USB support
- ADC support
There is an extra dt-binding update included, which has been acked
by Rob.
* tag 'am654-for-v5.1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux:
arm64: dts: ti: k3-am65-mcu: Add ADC nodes
dt-bindings: input: ti-tsc-adc: Add new compatible for AM654 SoCs
arm64: dts: ti: k3-am654-base-board: enable USB1
arm64: dts: ti: k3-am6: add USB support
arm64: dts: ti: am654: Add Main System Control Module node
arm64: dts: ti: k3-am65: Add MSMC RAM node
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* 'for-next/perf' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux:
perf: xgene: Remove set but not used variable 'config'
arm64: perf: remove misleading comment
dt-bindings: arm: Convert PMU binding to json-schema
for 5.1, please pull the following:
- Stefan updates the BCM2835 SoC driver with downstream properties and
uses that to implement a reboot notifier to tell the VC4 firmware when
Linux on the ARM CPU is rebooting
- Eric adds a proper power domain driver for the BCM283x SoCs and
updates a bunch of drivers to have a better and clearer Device Tree
definition to support power domains/breaking up of functionality. This
requires converting the existing watchdog driver into a MFD and then
breaking up the functionality into separate drivers and finally
updating the DTS files to leverage the power domains information.
- Wei provides a fix for making a symbol static
-----BEGIN PGP SIGNATURE-----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=t5+u
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.1/drivers' of https://github.com/Broadcom/stblinux into arm/drivers
This pull request contains Broadcom ARM/ARM64/MIPS based SoCs changes
for 5.1, please pull the following:
- Stefan updates the BCM2835 SoC driver with downstream properties and
uses that to implement a reboot notifier to tell the VC4 firmware when
Linux on the ARM CPU is rebooting
- Eric adds a proper power domain driver for the BCM283x SoCs and
updates a bunch of drivers to have a better and clearer Device Tree
definition to support power domains/breaking up of functionality. This
requires converting the existing watchdog driver into a MFD and then
breaking up the functionality into separate drivers and finally
updating the DTS files to leverage the power domains information.
- Wei provides a fix for making a symbol static
* tag 'arm-soc/for-5.1/drivers' of https://github.com/Broadcom/stblinux:
ARM: bcm283x: Switch V3D over to using the PM driver instead of firmware.
ARM: bcm283x: Extend the WDT DT node out to cover the whole PM block. (v4)
soc: bcm: bcm2835-pm: Make local symbol static
soc: bcm: Make PM driver default for BCM2835
soc: bcm: bcm2835-pm: Add support for power domains under a new binding.
bcm2835-pm: Move bcm2835-watchdog's DT probe to an MFD.
dt-bindings: soc: Add a new binding for the BCM2835 PM node. (v4)
firmware: raspberrypi: notify VC4 firmware of a reboot
soc: bcm2835: sync firmware properties with downstream
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* Add Qualcomm RPMh power domain driver and related changes
* Fix issues with sleep/wake sets and batch API in RPMh
* Update MAINTAINERS Qualcomm entry
* Fixup RMTFS-mem sysfs and uevents
* Fix error handling in GSBI
* Add SMD-RPM compatible entry for SDM660
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=CcrU
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/drivers
Qualcomm ARM Based Driver Updates for v5.1
* Add Qualcomm RPMh power domain driver and related changes
* Fix issues with sleep/wake sets and batch API in RPMh
* Update MAINTAINERS Qualcomm entry
* Fixup RMTFS-mem sysfs and uevents
* Fix error handling in GSBI
* Add SMD-RPM compatible entry for SDM660
* tag 'qcom-drivers-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
soc: qcom: smd-rpm: Add sdm660 compatible
soc: qcom: gsbi: Fix error handling in gsbi_probe()
soc: qcom: rpmh: Avoid accessing freed memory from batch API
drivers: qcom: rpmh: avoid sending sleep/wake sets immediately
soc: qcom: rmtfs-mem: Make sysfs attributes world-readable
soc: qcom: rmtfs-mem: Add class to enable uevents
soc: qcom: update config dependencies for QCOM_RPMPD
soc: qcom: rpmpd: Drop family A RPM dependency
MAINTAINERS: update list of qcom drivers
soc: qcom: rpmhpd: Mark mx as a parent for cx
soc: qcom: rpmhpd: Add RPMh power domain driver
soc: qcom: rpmpd: Add support for get/set performance state
soc: qcom: rpmpd: Add a Power domain driver to model corners
dt-bindings: power: Add qcom rpm power domain driver bindings
OPP: Add support for parsing the 'opp-level' property
dt-bindings: opp: Introduce opp-level bindings
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds the include/linux/reset directory to MAINTAINERS for reset
specific headers and adds headers for sunxi and socfpga in there to
get rid of a few extern function declarations.
There is a new reset driver for the Broadcom STB reset controller and
the i.MX7 system reset controller driver is extended to support i.MX8MQ
as well. Finally, there is a new header with reset id constants for
the Meson G12A SoC, which has a reset controller identical to Meson AXG
and thus can reuse its driver and DT bindings.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCXF2yeRcccC56YWJlbEBw
ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwH8jAP9OQaMl5llVXuHSFOwiqkJ2I09p
oROxu3dI/A4q7d5T8QD/Xuo4piSAdoT5YZyHp16NUafW3L1//wqTvxk0ubeTsgA=
=EIyo
-----END PGP SIGNATURE-----
Merge tag 'reset-for-5.1' of git://git.pengutronix.de/git/pza/linux into arm/drivers
Reset controller changes for v5.1
This adds the include/linux/reset directory to MAINTAINERS for reset
specific headers and adds headers for sunxi and socfpga in there to
get rid of a few extern function declarations.
There is a new reset driver for the Broadcom STB reset controller and
the i.MX7 system reset controller driver is extended to support i.MX8MQ
as well. Finally, there is a new header with reset id constants for
the Meson G12A SoC, which has a reset controller identical to Meson AXG
and thus can reuse its driver and DT bindings.
* tag 'reset-for-5.1' of git://git.pengutronix.de/git/pza/linux:
dt-bindings: reset: meson: add g12a bindings
reset: imx7: Add support for i.MX8MQ IP block variant
reset: imx7: Add plubming to support multiple IP variants
reset: Add Broadcom STB SW_INIT reset controller driver
dt-bindings: reset: Add document for Broadcom STB reset controller
reset: socfpga: declare socfpga_reset_init in a header file
reset: sunxi: declare sun6i_reset_init in a header file
MAINTAINERS: use include/linux/reset for reset controller related headers
dt-bindings: reset: imx7: Document usage on i.MX8MQ SoCs
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Do not get GPCv2 driver depend on SOC_IMX8MQ since the driver is
going to be used on more SoCs than just i.MX8MQ.
- Add power domain information into SCU bindings document.
- Add support of start/stop a CPU into imx firmware driver.
- Support multiple address ranges per child node for imx-weim bus
driver.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJcYi+0AAoJEFBXWFqHsHzOtdYH/jX/y0r7OvX5GVSrrnW8PlkC
3i2EQ0sGOxWOMqBegZIpFe9W7IddAetMf6praPGz/efHPnoVC4jO8Yqe4TZwQXLB
vOxoN4G7NH9Al9RX11ce96kd/tUgVK/JHuQJ9fu+ogrprLpAS3w1sbIkidOMSF3M
/5VrmFCxUNOPwTHRnyjw8QsyypKnKEBu0jA8sgyUmg99ii6rqQ5OKh1vgKf62J0f
1BbJLalI0CxGcYVQxYBy2ML37+XxCcN9Vl8FxiI4tVRtZox8/YkU9V5vEgVWN2fS
ZWfgT9w7cJxI5x8Em8Cxe4zcyVdbn5w26lXc6WbXazIncm206Ps+DIeHkQI9jPA=
=8C2m
-----END PGP SIGNATURE-----
Merge tag 'imx-drivers-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers
i.MX drivers update for 5.1:
- Do not get GPCv2 driver depend on SOC_IMX8MQ since the driver is
going to be used on more SoCs than just i.MX8MQ.
- Add power domain information into SCU bindings document.
- Add support of start/stop a CPU into imx firmware driver.
- Support multiple address ranges per child node for imx-weim bus
driver.
* tag 'imx-drivers-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
firmware: imx: Add support to start/stop a CPU
soc: imx: Break dependency on SOC_IMX8MQ for GPCv2
firmware: imx: scu-pd: add fallback compatible string support
dt-bindings: fsl: scu: add imx8qm scu power domain support
dt-bindings: fsl: scu: add fallback compatible string for power domain
bus: imx-weim: guard against timing configuration conflicts
bus: imx-weim: support multiple address ranges per child node
dt-bindings: bus: imx-weim: document multiple address ranges per child node
soc: imx: gpcv2: handle reset clocks
soc: imx: gpcv2: handle additional power-down bits in handshake register
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Convert the bindings of FSL SoCs and the boards built on FSL SoCs to
json-schema.
- Add bindings for boards: i.MX8QXP MEK, LS1012A based Oxalis, and
i.MX6 based Y Soft IOTA Draco and Hydra.
- Add vendor prefix for EBS-SYSTART GmbH and Catalyst Semiconductor.
- Add bindings for imx8qm scu clock and imx7ulp system integration
module.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJcYoByAAoJEFBXWFqHsHzOWPAH/1tuu0HPFXahqpVUJC4VEeGC
0jFa9xnDxG+GFLJw+4gjBm3e7LkcK4MdARpHYVWsP9n6+QMi74Bhe7QKa/B/7+ll
aUZaoJXc+A47niZvORc+intjDUkr7qjAZv0NzHJG1X5rXDFwCK+bjQyMSiYBn+p5
KFedKd1FaF3EfubIsSNedimi9g+57qt0jTQ6FzRrYVIKbia2AznobQI0lputfNcV
J1otgO5SaCdHxiAelPgRONp9aHsTmNWq559rjobfSJG0BcmGrsX9tb3oy0F58d0n
Bm/UhDUna4LhIhECejf6sWpxnmkc2inB8/fBDHS7/3DEyJQGgH0GuTJyhgMAHOA=
=Mi3B
-----END PGP SIGNATURE-----
Merge tag 'imx-bindings-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX DT bindings update for 5.1:
- Convert the bindings of FSL SoCs and the boards built on FSL SoCs to
json-schema.
- Add bindings for boards: i.MX8QXP MEK, LS1012A based Oxalis, and
i.MX6 based Y Soft IOTA Draco and Hydra.
- Add vendor prefix for EBS-SYSTART GmbH and Catalyst Semiconductor.
- Add bindings for imx8qm scu clock and imx7ulp system integration
module.
* tag 'imx-bindings-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: fsl: scu: add imx8qm scu clock support
dt-bindings: fsl: scu: add fallback compatible string for clock
dt-bindings: arm: fsl: Add devicetree binding for Oxalis
dt-bindings: vendor-prefixes: Add EBS-SYSTART GmbH Vendor Prefix
dt-bindings: arm: fsl: Fix bindings for LS1012A and LS1021A based boards
dt-bindings: Add vendor prefix for Catalyst Semiconductor
dt-bindings: arm: Add Y Soft IOTA Draco, Hydra and Ursa boards
dt-bindings: fsl: add imx7ulp system integration module binding
dt-bindings: arm: imx: add imx8qxp mek support
dt-bindings: arm: Convert FSL board/soc bindings to json-schema
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- more features for Endless EC100 board
- chip temperature sensor support
- fix ethernet pins
- add Mali-450 GPU
-----BEGIN PGP SIGNATURE-----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=PNC5
-----END PGP SIGNATURE-----
Merge tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt
ARM: dts: Amlogic updates for v5.1
- more features for Endless EC100 board
- chip temperature sensor support
- fix ethernet pins
- add Mali-450 GPU
* tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM: dts: meson8b: ec100: add the GPIO line names
ARM: dts: meson8b: ec100: improve the description of the regulators
ARM: dts: meson8b: ec100: enable the Ethernet PHY interrupt
ARM: dts: meson8m2: mxiii-plus: add iio-hwmon for the chip temperature
ARM: dts: meson8b: odroidc1: add iio-hwmon for the chip temperature
ARM: dts: meson8b: ec100: add iio-hwmon for the chip temperature
ARM: dts: meson8b: add the temperature calibration data for the SAR ADC
ARM: dts: meson8: add the temperature calibration data for the SAR ADC
ARM: dts: meson8m2: use the Meson8m2 specific SAR ADC compatible
ARM: dts: meson: switch the clock controller to the HHI register area
ARM: dts: meson8b: fix the Ethernet data line signals in eth_rgmii_pins
ARM: dts: meson8b: add the Mali-450 MP2 GPU
ARM: dts: meson8: add the Mali-450 MP6 GPU
dt-bindings: gpu: mali-utgard: add Amlogic Meson8 and Meson8b compatible
ARM: dts: meson8b: add the APB bus
ARM: dts: meson8: add the APB bus
ARM: dts: meson6: add the APB2 bus
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add device nodes for usb3, iommu, smi, i2c, spi, pwm,
mmc, NAND flash and PCIe
mt6797:
add pinctrl node
enable uart pins on x20 board
enable uart pins on EVB
mt7622:
Add all CPUs to the cooling maps
mt7623a:
Remove unused binding description
mt7629:
Add binding description for the SoC and the BananaPi
based on this chip
mt8173:
Add all CPUs to the cooling maps
mt8183:
Add binding description for the SoC
-----BEGIN PGP SIGNATURE-----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=xm9P
-----END PGP SIGNATURE-----
Merge tag 'v5.0-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt
mt2712:
Add device nodes for usb3, iommu, smi, i2c, spi, pwm,
mmc, NAND flash and PCIe
mt6797:
add pinctrl node
enable uart pins on x20 board
enable uart pins on EVB
mt7622:
Add all CPUs to the cooling maps
mt7623a:
Remove unused binding description
mt7629:
Add binding description for the SoC and the BananaPi
based on this chip
mt8173:
Add all CPUs to the cooling maps
mt8183:
Add binding description for the SoC
* tag 'v5.0-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
dt-bindings: arm: mediatek: add support for MT7622 BPI-R64 and MT7629 RFB
dt-bindings: arm: mediatek: remove unused "mediatek, mt7623a"
dt-bindings: arm: Add bindings for Mediatek MT8183 SoC Platform
arm64: dts: add pcie nodes for MT2712
arm64: dts: add nand nodes for MT2712
arm64: dts: add mmc nodes for MT2712
arm64: dts: add pwm nodes for MT2712
arm64: dts: add spi nodes for MT2712
arm64: dts: add i2c nodes for MT2712
arm64: dts: add iommu/smi nodes for MT2712
arm64: dts: Add USB3 related nodes for MT2712
ARM64: dts: mediatek: Add all CPUs in cooling maps
arm64: dts: Add uart for mt6797 EVB
arm64: dts: mediatek: x20: Add pinmux support for UART1
arm64: dts: mediatek: mt6797: Add pinctrl support
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This contains device tree binding updates for CPU frequency scaling on
Tegra210, BPMP support on Tegra210 and support for NVIDIA Shield TV.
-----BEGIN PGP SIGNATURE-----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=CP31
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.1-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
dt-bindings: tegra: Changes for v5.1-rc1
This contains device tree binding updates for CPU frequency scaling on
Tegra210, BPMP support on Tegra210 and support for NVIDIA Shield TV.
* tag 'tegra-for-5.1-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: cpufreq: tegra124: remove cpu_lp clock from required properties
dt-bindings: cpufreq: tegra124: remove vdd-cpu-supply from required properties
dt-bindings: clock: tegra124-dfll: add Tegra210 support
dt-bindings: clock: tegra124-dfll: Update DFLL binding for PWM regulator
dt-bindings: firmware: tegra186-bpmp: Remove name property
dt-bindings: firmware: Add bindings for Tegra210 BPMP
dt-bindings: tegra: Add Shield TV device tree binding documentation
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Our usual round of DT changes for the arm64 Allwinner SoCs:
- Enabling of the various power supplies on most a64 boards
- H6 SRAM controller support
- A64 CSI support
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXF1ZiQAKCRDj7w1vZxhR
xeeaAQCuII0MyMyRYhk4XPkjRncEks7A1Fp7u1kjR4VjbNq8JQD+OhCbKMAz4DVv
T7DeI92HwEO2Dx/ggNMVYDCUDyH55gI=
=Pd5b
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt64-for-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Allwinner arm64 DT changes for 5.1, take 2
Our usual round of DT changes for the arm64 Allwinner SoCs:
- Enabling of the various power supplies on most a64 boards
- H6 SRAM controller support
- A64 CSI support
* tag 'sunxi-dt64-for-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: a64: Enable PMIC power supplies on various boards
arm64: dts: allwinner: a64: teres-i: enable power supplies
arm64: dts: allwinner: h6: Add support for the SRAM C1 section
dt-bindings: sram: sunxi: Add compatible for the H6 SRAM C1
arm64: dts: allwinner: a64: Add A64 CSI controller
arm64: dts: allwinner: h6: Move GIC device node fix base address ordering
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add SMMU node for Stratix10
- Add vendor prefix fo Novtech
- Add a new 96Boards Chameleon96 board that uses a Cyclone5 SoCFPGA
- Add missing reset properties for all IP on Cyclone5 and Arria10
-----BEGIN PGP SIGNATURE-----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=8OgV
-----END PGP SIGNATURE-----
Merge tag 'socfpga_dts_for_v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt
SoCFPGA DTS updates for v5.1
- Add SMMU node for Stratix10
- Add vendor prefix fo Novtech
- Add a new 96Boards Chameleon96 board that uses a Cyclone5 SoCFPGA
- Add missing reset properties for all IP on Cyclone5 and Arria10
* tag 'socfpga_dts_for_v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: dts: socfpga: update more missing reset properties
ARM: dts: socfpga: update missing reset property peripherals
ARM: dts: Add support for 96Boards Chameleon96 board
dt-bindings: vendor-prefixes: Add Novtech Vendor Prefix
arm64: dts: stratix10: Add Stratix10 SMMU support
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
for 5.1, please pull the following:
- Dan relicenses the Luxul DTS files to GPL 2.0+/MIT
- Hao adds support for the Phicomm K3 which is a BCM4709 SoC with dual
BCM4366 radio
- Stefan adds support for the Raspberry Pi A+: binding and DTS files. He
also provides a bunch of DTC warning fixes for the different RPi DTS(i)
files and adds support for missing GPIO lines on RPi 2/3
-----BEGIN PGP SIGNATURE-----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=Ykbm
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.1/devicetree' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SoCs Device Tree updates
for 5.1, please pull the following:
- Dan relicenses the Luxul DTS files to GPL 2.0+/MIT
- Hao adds support for the Phicomm K3 which is a BCM4709 SoC with dual
BCM4366 radio
- Stefan adds support for the Raspberry Pi A+: binding and DTS files. He
also provides a bunch of DTC warning fixes for the different RPi DTS(i)
files and adds support for missing GPIO lines on RPi 2/3
* tag 'arm-soc/for-5.1/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm2835-rpi-zero-w: Drop unnecessary pinctrl
ARM: dts: bcm283x: Add missing GPIO line names
ARM: dts: bcm2837-rpi-3-b-plus: Clarify label for STATUS_LED
ARM: dts: bcm2837-rpi-3-b: Use consistent label for HDMI hotplug
ARM: dts: bcm2835: Fix labels for GPIO 0,1
ARM: dts: bcm2835-rpi: Drop unnecessary #address-cells/#size-cells
ARM: dts: bcm283x: Fix DTC warning for memory node
ARM: dts: add Raspberry Pi 3 A+
dt-bindings: bcm: Add Raspberry Pi 3 A+
ARM: dts: BCM5301X: Add basic DT for Phicomm K3
ARM: dts: BCM53573: Relicense Luxul files to the GPL 2.0+ / MIT
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
two being part of a family and sharing bigger parts of the devicetree.
rk3328 got sound-related upgrades and a wider patch drops mmc display-wp
fields from nodes which shouldn't use it.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlxTAa0QHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgYrMB/93qkhsRz6kGXyeGWLQFYVJZET1IsHIqRUl
HDu/NwvZRPheupjgk37lAbTvQ8TeE8zb8i5I3lbhSZr1m8GL1Bsc3XZc2l8FXA9f
jib3xCaykp/qZMjgqSsesZmwcMzpUdMuGvK4NLLIWNWW+u3jQzo8N4eyXexRzY29
4Z69GodfMbsvFfi9mJ63pb2iTJhU+h1pLm4X8Df5DE4i1QyL9+vOiVYFM7AaMhMC
bBHzkQiJZC5hlhKUcCCW22T62yPnCHQdRG7SNPVyh/zSl3GvtL1CP9CHFDsPHG/j
443k+McXCvRCSK1wjRJraffD8gluBa/QgjFZj7hvuooOX7aGlM2E
=Bc63
-----END PGP SIGNATURE-----
Merge tag 'v5.1-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
New boards are the Rock Pi 4, NanoPC-T4 and NanoPi-M4, with the last
two being part of a family and sharing bigger parts of the devicetree.
rk3328 got sound-related upgrades and a wider patch drops mmc display-wp
fields from nodes which shouldn't use it.
* tag 'v5.1-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: clean up the abuse of disable-wp
arm64: dts: rockchip: 'Fix' nanopi4 uSD card detect
arm64: dts: rockchip: Add NanoPC-T4 IR receiver
arm64: dts: rockchip: Refine nanopi4 differences
arm64: dts: rockchip: Add DT for NanoPi M4
arm64: dts: rockchip: add ROCK Pi 4 DTS support
arm64: dts: rockchip: Add devicetree for NanoPC-T4
arm64: dts: rockchip: enable analog audio node for rock64
arm64: dts: rockchip: move rk3328 #sound-dai-cells to the soc dtsi
arm64: dts: rockchip: add rk3328 ACODEC node
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
improvements for rv1108 as well. RK3066 got support for the core
display components and the Edison tablet got its touchscreen added.
Apart from that a wider fix to drop display-wp usage from places where
it shouldn't be used, a pin fix for Edison and a cleanup to prevent
rk3036 board from defining sound-dai-cells for core components in
each board separately.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlxTAPIQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgYbQCACiWIYVLrOwOPSgDo3xRFygo2Bmlo2EncEz
UZM0z3gQpzQ8go7Ms6eqL7qRoMI14Cc3XT6dNkzjRBIBaJAi3LXy1G4CLMzxuurD
qri6shmJv94TfBNISJ9FOQYqJRxSK1z4ncp6iXNeOgOa9NCkqSXkHTOve8oVAxfj
nBnMAA0kkX/haF4pNaLoDUv3ppMi7UHjAuoyJMNaTFqVG9qjR1DPNBnCGdYZGacU
Xkb/9n/QOLsJc/yoMcUno+Q5tUVkLsxQVhsApf9Tf7Hd76WV0dgIzi0hENvoKJjK
TwfHz26NyNzw9KbX5YJmNGUAbgesjVBx5AXJk+pBZvrBWGUDtixE
=VDwG
-----END PGP SIGNATURE-----
Merge tag 'v5.1-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
New board the Elgin-R1 based on the rv1108 soc and a number of small
improvements for rv1108 as well. RK3066 got support for the core
display components and the Edison tablet got its touchscreen added.
Apart from that a wider fix to drop display-wp usage from places where
it shouldn't be used, a pin fix for Edison and a cleanup to prevent
rk3036 board from defining sound-dai-cells for core components in
each board separately.
* tag 'v5.1-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: clean up the abuse of disable-wp
ARM: dts: rv1108: Add support for rv1108-elgin-r1 board
dt-bindings: Add vendor prefix for elgin
ARM: dts: rockchip: rv1108: Add spim0 and spim1 pinctrl groups
ARM: dts: rockchip: Add missing dma-names SPI support for rv1108
ARM: dts: rockchip: add rk3066 vop display nodes
ARM: dts: rockchip: add focaltech touchscreen to rk3188-bqedison2qc
ARM: dts: rockchip: fix cif1_pdn pin on rk3188-bqedison2qc
ARM: dts: rockchip: add HCLK_HDMI to rk3066 vio power-domain
ARM: dts: rockchip: move rk3036 i2s sound-dail-cells into soc dtsi
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
AM654 SoCs has ADC IP which is similar to AM335x, but without the
touchscreen part. Add new compatible to handle AM654 SoCs. Also, it
seems that existing compatible strings used in the kernel DTs were never
documented. So, document them now.
Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Dwc3 now works on TI's AM6xx platforms. Also on dwc3 we have a few
changes which improve request cancellation and some improvements to
how we print to the trace buffer.
Renesas_usb3 got support for r8a774c0 device.
Dwc2 got scatter-gather support.
Apart from these, the usual set of minor fixes and all sorts of small
details.
-----BEGIN PGP SIGNATURE-----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=4fTL
-----END PGP SIGNATURE-----
Merge tag 'usb-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next
Felipe writes:
USB: changes for v5.1 merge window
Dwc3 now works on TI's AM6xx platforms. Also on dwc3 we have a few
changes which improve request cancellation and some improvements to
how we print to the trace buffer.
Renesas_usb3 got support for r8a774c0 device.
Dwc2 got scatter-gather support.
Apart from these, the usual set of minor fixes and all sorts of small
details.
* tag 'usb-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (40 commits)
usb: phy: twl6030-usb: fix possible use-after-free on remove
usb: misc: usbtest: add super-speed isoc support
usb: dwc3: Reset num_trbs after skipping
usb: dwc3: gadget: don't enable interrupt when disabling endpoint
fotg210-udc: pass struct device to DMA API functions
fotg210-udc: remove a bogus dma_sync_single_for_device call
usb: gadget: Change Andrzej Pietrasiewicz's e-mail address
usb: f_fs: Avoid crash due to out-of-scope stack ptr access
usb: dwc3: haps: Workaround matching VID PID
usb: gadget: f_fs: preserve wMaxPacketSize across usb_ep_autoconfig() call
usb: gadget: move non-super speed code out of usb_ep_autoconfig_ss()
usb: gadget: function: sync f_uac1 ac header baInterfaceNr
usb: dwc2: gadget: Add scatter-gather mode
usb: gadget: fix various indentation issues
usb: dwc2: Fix EP TxFIFO number setting
udc: net2280: Fix net2280_disable
USB: gadget: Improve kerneldoc for usb_ep_dequeue()
usb: dwc3: debug: purge usage of strcat
usb: dwc3: trace: pass trace buffer size to decoding functions
usb: dwc3: gadget: remove DWC3_EP_END_TRANSFER_PENDING
...
- finally remove legacy platform data as all users have been switched
to using device properties and nvmem notifier chain
- add support for the 'num-addresses' property
-----BEGIN PGP SIGNATURE-----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=Jbyk
-----END PGP SIGNATURE-----
Merge tag 'at24-5.1-updates-for-wolfram' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-5.1
at24 updates for v5.1
- finally remove legacy platform data as all users have been switched
to using device properties and nvmem notifier chain
- add support for the 'num-addresses' property
Add ROHM BD71837 / BD71847 specific device tree bindings for
controlling the PMIC shutdown/reset states and voltages for
different HW states. The PMIC was designed to be used with NXP
i.MX8 SoC and it supports SNVS low power state which seems to
be typical for NXP i.MX SoCs. However, when SNVS is used we must
not allow SW to control enabling/disabling those regulators which
are crucial for system to boot as there is a HW limitation which
causes SW controlled regulators to be kept shut down after SNVS
reset.
Allow setting the SNVS to be used as reset target state and allow
marking those regulators which are critical for boot.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Tested-by: Angus Ainslie <angus@akkea.ca>
Reviewed-by: Angus Ainslie <angus@akkea.ca>
Signed-off-by: Mark Brown <broonie@kernel.org>
