This PR is pretty significant, but it been mostly about:
- Fixing the DTC warnings in most of our DT. We're now down to 2
warnings, from several thousands.
- Fixing a good number of minor issues, typos, and so on thanks to the DT
validation tools
- Describe the MBUS controller and the special DMA RAM mapping on the A13
- Add support for the LRADC on the A83t
- Add support for the I2C bus used for the PMIC on the A33
- Start using the DT annotation /omit-if-no-ref/ on our pinctrl nodes
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXLmxsgAKCRDj7w1vZxhR
xQs0APwIUuCrLfRD0av6xeCI4bon+G6drCxNVqkgf/cm3sAd5AEAzd6Ok74CEJar
xlSPxgqpBxCVyt2bxQxfN5mch2OPKgA=
=HH/F
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Allwinner DT changes for 5.2
This PR is pretty significant, but it been mostly about:
- Fixing the DTC warnings in most of our DT. We're now down to 2
warnings, from several thousands.
- Fixing a good number of minor issues, typos, and so on thanks to the DT
validation tools
- Describe the MBUS controller and the special DMA RAM mapping on the A13
- Add support for the LRADC on the A83t
- Add support for the I2C bus used for the PMIC on the A33
- Start using the DT annotation /omit-if-no-ref/ on our pinctrl nodes
* tag 'sunxi-dt-for-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (65 commits)
ARM: dts: sun8i: a83t: Enable USB OTG controller on some boards
ARM: dtsi: axp81x: add USB power supply node
ARM: dts: sun5i: Reorder pinctrl nodes
ARM: dts: sun6i: i7: Remove useless property
ARM: dts: sun4i: lime: Fix the USB PHY ID detect GPIO properties
ARM: dts: sun4i: protab2: Remove stale pinctrl-names entry
ARM: dts: sunxi: Remove useless phy-names from EHCI and OHCI
ARM: dts: sun8i: v40: bananapi-m2-berry: Sort device node dereferences.
ARM: dts: sun5i: Add the MBUS controller
dt-bindings: sunxi: Add compatible for OrangePi 3 board
ARM: dts: sun8i: a83t: Add I2C2 pinmux setting for PE pins
dt-bindings: arm: sunxi: Add Beelink GS1 board
ARM: dts: sun8i: tbs-a711: Add support for volume keys input
ARM: dts: sunxi: Add R_LRADC support for A83T
ARM: dts: sunxi: Improve A33 NAND transfers by using DMA
ARM: dts: sun8i: tbs-a711: Enable UART2 (for NEO-6M GPS module)
ARM: dts: sunxi: Remove useless pinctrl nodes
ARM: dts: sunxi: Remove pinctrl groups setting bias
ARM: dts: sunxi: Remove useless address and size cells
ARM: dts: sunxi: Conform to DT spec for NAND controller
...
Signed-off-by: Olof Johansson <olof@lixom.net>
This series of devicetree changes adds the l4 abe interconnect devices
and moves the devices to their right places in the hierarchy similar
to what we've already done for most l4 devices earlier. We first add
a shared omap4-mcpdm.dtsi to make adding omap4-l4-abe.dtsi easier for
the mcpdm changes. And as earlier, in case of unexpected trouble,
devices can be probed the old way by moving one device at a time to the
old place.
This series of changes depends on the ti-sysc driver changes for handling
the external optional clocks that the mcpdm relies on, and is based on
the related ti-sysc driver changes. Note that this series does not depend
on dropping of the leagcy platform data, but I already had those committed
along with the ti-sysc driver changes and noticed too late.
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAly0qJARHHRvbnlAYXRv
bWlkZS5jb20ACgkQG9Q+yVyrpXMMshAAq4XkZYB07CcMugY8WO0SA1fj42CfIMis
NWqexA3K2dpwnPlj8jaAd0d5Xlmr+2S25IMHCP8qk8K+t8aFGmTfQsKif1irfk9D
Xp+8burVIZKMQcxXHfaJKTlTXCFkE6ha+Kb6sYnYjOB/lXP7rsHCn0O7MPY54Uip
a/z/NN3M1yMdJPoZZyPRaWD6nSd62FYC8hOqAlCvBe5qEM4CWdvINvvW4FMyRHCW
UHhGVvcyGV3UtiTmInQTnvbw5Ha38QESkJrhm0JnItBrxaUOfPfXnHfgZprBTO8G
yFQwMhKmokehWAO+1PiULzHdE5UiYKoy+eNgooYIM1wSor0dn9UoAThW4D69cET7
azY0xXAVzFtFc75IOgD3HWo9p00faGLW2hQP+XxAtPCQnGfR26PzCHk+VzR3b608
q40U6pkZCQ2g1P99fDDJostPz8ZuDG4vB5bE5yVwhbIWXjQWhyReJFCYoZD4hiFh
k4l5y7iPAxGndn7AjrAV7iUmqUZBJcuk+qu7YEb+nrMwwbWJA1g8+6zxYFl7TXJt
ihsOEWBQninNJ1PvesGr9DjWAvmmhQq/wtSSChd5/SGfHI9HVNedJJEFCcozrRLf
RIerncFUXKIVXV1ZNJMaQ3/U2r1f5a3867SvqeR5IGIIMhHyvVi5HXwzzB6Znszz
DTmI0uAU4FA=
=P5Js
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.2/dt-ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt
Devicetree changes for omap4 and 5 l4 abe interconnect
This series of devicetree changes adds the l4 abe interconnect devices
and moves the devices to their right places in the hierarchy similar
to what we've already done for most l4 devices earlier. We first add
a shared omap4-mcpdm.dtsi to make adding omap4-l4-abe.dtsi easier for
the mcpdm changes. And as earlier, in case of unexpected trouble,
devices can be probed the old way by moving one device at a time to the
old place.
This series of changes depends on the ti-sysc driver changes for handling
the external optional clocks that the mcpdm relies on, and is based on
the related ti-sysc driver changes. Note that this series does not depend
on dropping of the leagcy platform data, but I already had those committed
along with the ti-sysc driver changes and noticed too late.
* tag 'omap-for-v5.2/dt-ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (44 commits)
ARM: dts: Add l4 abe interconnect hierarchy and ti-sysc data for omap5
ARM: dts: Add l4 abe interconnect hierarchy and ti-sysc data for omap4
ARM: dts: Add common mcpdm dts file for omap4
bus: ti-sysc: Add generic enable/disable functions
ARM: OMAP2+: Drop mcspi platform data for omap4
ARM: OMAP2+: Drop uart platform data for dra7
ARM: OMAP2+: Drop gpio platform data for dra7
ARM: OMAP2+: Drop i2c platform data for dra7
ARM: OMAP2+: Drop mmc platform data for dra7
ARM: OMAP2+: Drop uart platform data for omap5
ARM: OMAP2+: Drop gpio platform data for omap5
ARM: OMAP2+: Drop i2c platform data for omap5
ARM: OMAP2+: Drop mmc platform data for omap5
ARM: OMAP2+: Drop uart platform data for am33xx and am43xx
ARM: OMAP2+: Drop gpio platform data for am33xx and am43xx
ARM: OMAP2+: Drop i2c platform data for am33xx and am43xx
ARM: OMAP2+: Drop mmc platform data for am330x and am43xx
ARM: OMAP2+: Drop uart platform data for omap4
ARM: OMAP2+: Drop gpio platform data for omap4
ARM: OMAP2+: Drop i2c platform data for omap4
...
Signed-off-by: Olof Johansson <olof@lixom.net>
This series of changes configures dra7 pcie x2 lane mode, configures
am43xx-epos-evm regulators and keypad wakeup source, and uses standard
reset-gpios instead of gpio-reset for n810.
We also need to split dra7 dtsi files for properly supporting dra76x
and am576 as some of the devices are different such as usb and pruss.
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAly0pfQRHHRvbnlAYXRv
bWlkZS5jb20ACgkQG9Q+yVyrpXNM3BAAvrQsjq1NTq6k7L5yZuInYtP+L7isRTz3
M7AWpMOjXex+a3GoZ8a8qrRVc6IqohAid75y8Y1qDvFVi9QEMrCsYlRwlYl048UM
o5Ry4CePIY9XvUurRIemisT5/RQ4jzz9BBPogIJeQHl9r4qKbZEzTllmHnE7D78i
Eh52IHQKScyO5MmUxZErH2f2StPHINjvO5WeuUUGcDcg7pcRlnbgLDtx26deewbl
qMCh/3u71vd0g1JyEScOSq/QkeASpDx0sJifCLeWOmRZyarQGg5SduxVnQ6OJo8U
xqiQ5dNYEn4BASOZ6BFGmSyqjvQWgmA0RnxkGB9nYPk9s9Lafq+gWgFNrI99Eavm
BERMXlsrOJ/y5STjx+wmZ/IEeUceNqHK44xr8hcYweiu1Duv8+lfRRLLOdj2besh
SPYsomoqY1yQKvr3k7YcuCddsFQZ9RtcaLVjlJmNlDE078jI1f/v9ZLXY8K8ZF3G
gm07S/HtuX7xWM/fRveXrP2YQ+OREoyo5cTeDAyZmk/bY3sqVwgRuicgXAqu0Zdg
AJQCnNda4UAIohtC98RHS1MB5BuwTyv431iAsxaAvK2cAR8NnV3qr5AmBbgP1iMP
/oLeXA6OpfT+JHk/tGQ0TG9LrqNqW9DyZZOqfXCGYTiRJd06qUxvPIZOsUQFnJho
jIsDaa4YQjc=
=uc0c
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.2/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt
Devicetree changes for omap variants
This series of changes configures dra7 pcie x2 lane mode, configures
am43xx-epos-evm regulators and keypad wakeup source, and uses standard
reset-gpios instead of gpio-reset for n810.
We also need to split dra7 dtsi files for properly supporting dra76x
and am576 as some of the devices are different such as usb and pruss.
* tag 'omap-for-v5.2/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: dra7: Separate AM57 dtsi files
dt-binding: arm: omap: Add information for AM5748
ARM: dts: omap2420-n810: Use new CODEC reset pin name
ARM: dts: am43xx-epos-evm: Add matrix keypad as wakeup source
ARM: dts: am43xx-epos-evm: Keep DCDC3 regulator on in suspend to memory
ARM: dts: am43xx-epos-evm: Keep DCDC5 and DCDC6 always on
ARM: dts: dra7: Add properties to enable PCIe x2 lane mode
Signed-off-by: Olof Johansson <olof@lixom.net>
* Hi3660 SoC and related boards:
- Added DMA support for the uart nodes
- Added the asp DMA controller node
- Replaced dma-min-chan with dma-channel-mask to follow the binding
* Hi3670 SoC and related boards:
- Reused Hi3660 reset to support Hi3670, updated the binding
document and added dts node
- Reused Hi3660 MMC controller to support Hi3670, updated the
binding document and added related nodes to support SD and WiFi
for the SoC and hikey970 board
- Added UFS controller node
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=9+Sr
-----END PGP SIGNATURE-----
Merge tag 'hisi-arm64-dt-for-5.2' of git://github.com/hisilicon/linux-hisi into arm/dt
ARM64: DT: Hisilicon SoCs DT updates for 5.2
* Hi3660 SoC and related boards:
- Added DMA support for the uart nodes
- Added the asp DMA controller node
- Replaced dma-min-chan with dma-channel-mask to follow the binding
* Hi3670 SoC and related boards:
- Reused Hi3660 reset to support Hi3670, updated the binding
document and added dts node
- Reused Hi3660 MMC controller to support Hi3670, updated the
binding document and added related nodes to support SD and WiFi
for the SoC and hikey970 board
- Added UFS controller node
* tag 'hisi-arm64-dt-for-5.2' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hisilicon: hi3670: Add UFS controller support
arm64: dts: hi3660: Fixup unofficial dma-min-chan to dma-channel-mask
arm64: dts: hi3660: Add hisi asp dma device
arm64: dts: hi3660: Add dma to uart nodes
arm64: dts: hisilicon: hikey970: Add SD and WiFi support
arm64: dts: hisilicon: hi3670: Add MMC controller support
dt-bindings: mmc: Add HI3670 MMC controller binding
arm64: dts: hisilicon: hi3670: Add reset controller support
dt-bindings: reset: Add HI3670 reset controller binding
Signed-off-by: Olof Johansson <olof@lixom.net>
- Align xlnx-zynqmp-clk.h file name and separate
binding for clock driver
- Add TI quirks to zynqmp boards
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAly0Q7IACgkQykllyylKDCHtLACfZGBpUNq5coHf3tQohyNyROnh
q9cAn11bsVu3/BDOYhAO9TzKuYtzCACh
=n0Wu
-----END PGP SIGNATURE-----
Merge tag 'zynqmp-dt-for-v5.2' of https://github.com/Xilinx/linux-xlnx into arm/dt
arm64: dts: zynqmp: DT changes for v5.2
- Align xlnx-zynqmp-clk.h file name and separate
binding for clock driver
- Add TI quirks to zynqmp boards
* tag 'zynqmp-dt-for-v5.2' of https://github.com/Xilinx/linux-xlnx:
arm64: zynqmp: dt: Add TI PHY quirk
dt-bindings: xilinx: Separate clock binding from firmware doc
include: dt-binding: clock: Rename zynqmp header file
Signed-off-by: Olof Johansson <olof@lixom.net>
and emmc cleanups for rk3399. New boards are the OrangePi (rk3399) and
NanoPi NEO4. Both the OrangePi as well as the NanoPC/Pie family also
directly got some additional features added after the boards itself.
The Rock960 family (rock960+ficus) got their power-tree cleaned to match
the schematics and also got hdmi-audio and their gpu enabled.
Mali support also got enabled on the RockPi4 and finally both
rk3328-rock64 and rk3328-roc-cc got some additional features.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlyjIrAQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgTCuB/9wEiNDr5DvIYHdQM0/TrAWzMepdaO2YAHI
5v2NaZ3l0LDB1yXEJUJn/f7PRbGW9IETaldXLWKca8g8zJq6tM60p4gWx0XHw2hq
szajRwBhbvo16u3vSNOJ1LlK8SdfI+ENx9129qWVtXToODK/0TIo+ubOpPT3uBxt
P2Og+2F0zoj1WSWTXPEaGexF0YnwRp1v5NODF9XV6jpB9wAL+CYsllse7GFLxc52
sdp2Lfp/r/3VzHOCDOJ8e9YPXmLIYrjBQNw12/XkGdbnMKucCnI8GYxdkU7gSUh8
9ryBAAjOWREopY8GwdBfX+C+l1AKUFi8YFvC6PCxqFoseglzvAK0
=/JXo
-----END PGP SIGNATURE-----
Merge tag 'v5.2-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
Core new soc features are hdmi-cec for rk3328, scheduler capacity-values
and emmc cleanups for rk3399. New boards are the OrangePi (rk3399) and
NanoPi NEO4. Both the OrangePi as well as the NanoPC/Pie family also
directly got some additional features added after the boards itself.
The Rock960 family (rock960+ficus) got their power-tree cleaned to match
the schematics and also got hdmi-audio and their gpu enabled.
Mali support also got enabled on the RockPi4 and finally both
rk3328-rock64 and rk3328-roc-cc got some additional features.
* tag 'v5.2-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (23 commits)
arm64: dts: rockchip: Decrease emmc-phy's drive impedance on rk3399-puma
arm64: dts: rockchip: Define drive-impedance-ohm for RK3399's emmc-phy.
arm64: dts: rockchip: Disable DCMDs on RK3399's eMMC controller.
arm64: dts: rockchip: Add nanopi4 ethernet phy
arm64: dts: rockchip: Add PWM fan for NanoPC-T4
arm64: dts: rockchip: Add the fusb typec manager to rk3399-orangepi
arm64: dts: rockchip: Specify vid supply for the rk3399-orangepi compass (AK09911)
arm64: dts: rockchip: Fix clock names and add missing supplies for bluetooth on rk3399-orangepi
arm64: dts: rockchip: Add 12V DCIN regulator to rk3399-ficus
arm64: dts: rockchip: Rename vcc_sys into vcc5v0_sys on rk3399-rock960
arm64: dts: rockchip: Add Nanopi NEO4 initial support
arm64: dts: rockchip: enable hdmi audio out for rk3399-rockpro64
arm64: dts: rockchip: Add support for the Orange Pi RK3399 board.
arm64: dts: rockchip: enable mali on rock960 boards
arm64: dts: rockchip: enable mali on Rock Pi 4
arm64: dts: rockchip: add rk3328-roc-cc cpu-supply entries for all cpu nodes
arm64: dts: rockchip: give some life to the rk3328-roc-cc leds
arm64: dts: rockchip: add #sound-dai-cells to HDMI of rk3328
arm64: dts: rockchip: add ir-receiver node on rk3328-rock64
arm64: dts: rockchip: add leds node on rk3328-rock64
...
Signed-off-by: Olof Johansson <olof@lixom.net>
of cleanups for rk3288 from that area, hdmi support for the old rk3066
a small rv1108-eglin-r1 cleanup and wifi+hdmi-cec for the tinker board.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlyjIKkQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgagZB/0djmLiIppQmphU5xz0nu9la/6qPpX2Mglk
3XIi/pQXu+O/1i4aNJJwvk9k6cmX7nbVG2vQlLcsM/XNq0fy8Y4on9UThohkg23p
Cf34w2pFn5Tp5bBTCWxa1LTi20UMVZsYZivy+/LdBlTIekEMNFHf6veIn8dBtnPW
nFjDuvlhZqg6CaxVZ9Vn6xN1ClqleR0LuUcEt2X6wE8UocDs/01wZffcFbs3K0Uo
mgz1vUd4DlhHJo2YlTa+T88OF13d7WXboNR67xJTlm69d0wfm+k3MFeZYAhiI4kx
HdsqS+ZZxzsos7X3QCDiXMCbd070yGiDudD3UY4VCKymx9DzGWmp
=YSCV
-----END PGP SIGNATURE-----
Merge tag 'v5.2-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
Quite a bit of love for the rk3288-veyron chromeos devices and a number
of cleanups for rk3288 from that area, hdmi support for the old rk3066
a small rv1108-eglin-r1 cleanup and wifi+hdmi-cec for the tinker board.
* tag 'v5.2-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: enable vop0 and hdmi nodes to rk3066a-mk808
ARM: dts: rockchip: add rk3066 hdmi nodes
ARM: dts: rockchip: Add device tree for rk3288-veyron-mighty
dt-bindings: ARM: dts: rockchip: Add bindings for rk3288-veyron-mighty
ARM: dts: rockchip: Add vdd_logic to rk3288-veyron
ARM: dts: rockchip: Add dvs-gpios to rk3288-veyron-jerry
ARM: dts: rockchip: Add rk3288-veyron-jerry rev 10-15
dt-bindings: ARM: dts: rockchip: Add rk3288-veyron-jerry rev 10-15
ARM: dts: rockchip: Fix gic/efuse sort ordering for rk3288
ARM: dts: rockchip: Enable WiFi on rk3288-tinker
ARM: dts: rockchip: add grf reference in rk3288 tsadc node
ARM: dts: rockchip: Enable HDMI CEC on rk3288-tinker-s
ARM: dts: rockchip: remove disable-wp from rv1108-elgin-r1 emmc node
Signed-off-by: Olof Johansson <olof@lixom.net>
Convert the tsl2772 device tree bindings to the new YAML format.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Convert the tsl2583 device tree bindings to the new YAML format.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add binding documentation of apmixedsys for MT8516 SoC.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add binding documentation of infracfg for MT8516 SoC.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add binding documentation of topckgen for MT8516 SoC.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add compatible for i.MX8MQ and add i.MX7D/S, i.MX7ULP and i.M8MQ
to the description.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The STM32 LP Timer counter driver now resides under the Counter
subsystem. This patch adjusts dt-bindings to account for the STM32
lptimer driver move.
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add bindings for STM32 Timer quadrature encoder.
It is a sub-node of STM32 Timer which implement the
quadratic encoder part of the hardware.
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The simple-audio-card,pin-switches property can contain the list of
widget names for which pin switches must be created.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Mark Brown <broonie@kernel.org>
STM32F769 clocks are derived from STM32746 clocks.
main differences are:
- new source clock for SAI1 and SAI2 (HSI or HSE)
- Add DFSDM & DSI clocks
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
On Spreadtrum platform, the audio subsystem will use the multi-channel
data transfer controller to transfer sound stream between audio subsystem
and other AP/CP subsystem.
It can support 10 DAC channel and 10 ADC channel, and each channel has
512 bytes depth data fifo. Moreover each channel can be used DMA mode
or interrupt mode to transfer data.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the need for child nodes in the sckc binding to be able to remove
dtc warnings and have a more modern binding.
Also document optional properties.
Cc: Rob Herring <robh@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
More PLL divider clocks are needed by clock consumer IP. So update
the PLL divider description to make it more general.
Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Document the ast2400, ast2500 PCI-to-AHB bridge control driver bindings.
Signed-off-by: Patrick Venture <venture@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
New device suport
* ad7606
- Support the AD7616 16 channel, 12bit ADC.
* fxas21002c
- New driver for this gyroscope with I2C and SPI support.
* lsm6dsx
- Support the lsm6dsr, new device information structure and dt bindings.
* srf04
- Addition device IDs for mb1000, mb1010, mb1020, mb1030 and mb1040 +
support of different required trigger pulse lengths.
* st-accel
- Support the ls2de12, new device info and dt bindings.
* ti-ads8344
- New driver for this 8 channel, 16 bit SPI ADC.
Binding conversions to yaml - we have started doing these in general for IIO.
* avia-hx711
* bmp085
Cleanups and minor fixes / additions
* ad5758
- Fixup for some changes between preproduction parts and final part.
* ad7606
- Refactor handling of oversampling to make it easy to vary between
supported devices.
* ad9832
- Organise includes.
- Clock framework to handle clocks.
* ad9834
- Drop unnecessary parenthesis.
* bmc150
- Use __func__ rather than hardcoding.
* dummy_evgen.
- Fix a memleak on error in probe.
* kxcjk1013
- Add KXCJ91008 ACPI ID as seen in the wild.
- Use __func__ rather than hardcoding.
* imx7d
- Local dev variable to simplify code a bit.
- dev_err replaces pr_err to give more info.
- devm_platform_ioremap_resource for small reduction in boilerplate.
- Simplify probe and remove by sharing suspend / resume logic.
- Devm for iio_device_register as remove only contains the unregister.
* lsm6dsx
- Remove a variable that was never read.
- Open code values where they are effectively described by what is assigned
to them rather than using uninformative defines.
* max31856
- Avoid an unintialized ret variable in a path that can't actually occur
but is hard for a static checker to know.
* max9611
- White space
* mpu3050
- Reduce a sleep worst case by switching from msleep to usleep_range.
* qcom-spmi-adc5
- Add MODULE_DEVICE_TABLE to assist autoloading of this as a module.
* stm32-dfsdm
- Fix missing dependencies.
* stm32-timer trigger
- Fix a build issue when disabled.
* ti-ads7950
- Fix mising dependency on CONFIG_GPIOLIB.
-----BEGIN PGP SIGNATURE-----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=McKo
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.2b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Second set of IIO new device support, features and cleanup for the 5.2 cycle.
New device suport
* ad7606
- Support the AD7616 16 channel, 12bit ADC.
* fxas21002c
- New driver for this gyroscope with I2C and SPI support.
* lsm6dsx
- Support the lsm6dsr, new device information structure and dt bindings.
* srf04
- Addition device IDs for mb1000, mb1010, mb1020, mb1030 and mb1040 +
support of different required trigger pulse lengths.
* st-accel
- Support the ls2de12, new device info and dt bindings.
* ti-ads8344
- New driver for this 8 channel, 16 bit SPI ADC.
Binding conversions to yaml - we have started doing these in general for IIO.
* avia-hx711
* bmp085
Cleanups and minor fixes / additions
* ad5758
- Fixup for some changes between preproduction parts and final part.
* ad7606
- Refactor handling of oversampling to make it easy to vary between
supported devices.
* ad9832
- Organise includes.
- Clock framework to handle clocks.
* ad9834
- Drop unnecessary parenthesis.
* bmc150
- Use __func__ rather than hardcoding.
* dummy_evgen.
- Fix a memleak on error in probe.
* kxcjk1013
- Add KXCJ91008 ACPI ID as seen in the wild.
- Use __func__ rather than hardcoding.
* imx7d
- Local dev variable to simplify code a bit.
- dev_err replaces pr_err to give more info.
- devm_platform_ioremap_resource for small reduction in boilerplate.
- Simplify probe and remove by sharing suspend / resume logic.
- Devm for iio_device_register as remove only contains the unregister.
* lsm6dsx
- Remove a variable that was never read.
- Open code values where they are effectively described by what is assigned
to them rather than using uninformative defines.
* max31856
- Avoid an unintialized ret variable in a path that can't actually occur
but is hard for a static checker to know.
* max9611
- White space
* mpu3050
- Reduce a sleep worst case by switching from msleep to usleep_range.
* qcom-spmi-adc5
- Add MODULE_DEVICE_TABLE to assist autoloading of this as a module.
* stm32-dfsdm
- Fix missing dependencies.
* stm32-timer trigger
- Fix a build issue when disabled.
* ti-ads7950
- Fix mising dependency on CONFIG_GPIOLIB.
* tag 'iio-for-5.2b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (42 commits)
iio: adc: qcom-spmi-adc5: Fix of-based module autoloading
iio: dummy_evgen: fix possible memleak in evgen init
iio:accel:Switch hardcoded function name with a reference to __func__ making the code more maintainable
iio: adc: stm32-dfsdm: fix triggered buffer build dependency
iio: adc: stm32-dfsdm: fix unmet direct dependencies detected
iio: trigger: stm32-timer: fix build issue when disabled
iio: imx7d_adc: Use devm_iio_device_register()
iio: imx7d_adc: Simplify imx7d_adc_remove() with imx7d_adc_suspend()
iio: imx7d_adc: Simplify imx7d_adc_probe() with imx7d_adc_resume()
drivers/iio/gyro/mpu3050-core.c: This patch fix the following checkpatch warning.
iio: dac: ad5758: Modifications for new revision
iio: imu: st_lsm6dsx: inline per-sensor data
iio: adc: Add driver for the TI ADS8344 A/DC chips
dt-bindings: iio: adc: Add bindings for TI ADS8344 A/DC chips
MAINTAINERS: add entry for fxas21002c gyro driver
iio: gyro: fxas21002c: add spi driver
iio: gyro: fxas21002c: add i2c driver
iio: gyro: add core driver for fxas21002c
iio: gyro: add DT bindings to fxas21002c
Kconfig: change configuration of srf04 ultrasonic iio sensor
...
*) Add a new *release* phy_ops invoked when the consumer relinquishes PHY
that can be used to undo the operation performed in xlate
*) Add new driver to support USB2 PHY and shared USB3 + PCIE PHY in Amlogic
G12A SoC Family.
*) Add new driver to support for Broadcom's Stingray USB PHY (Type 1 has
one super speed PHY and one high speed PHY, Type 2 has one high speed PHY)
*) Add new driver to support USB PHY in hi3660 SoC of Hisilicon
*) Add new driver to support UFS M-PHY in MediaTek SoC
*) Add new driver to support XUSB pad controller in Tegra186 SoCs
*) Add new driver to support SERDES in TI's AM654 platform
*) Add support for generation 2 USB2 PHY and gneration 3 USB2 PHY in r8a77470
to phy-rcar-gen2.c and phy-rcar-gen3-usb2.c respectively
*) Add support for PCIe QMP PHY support in msm8998 to phy-qcom-qmp.c
*) Add support for SERDES6G in phy-ocelot-serdes.c
*) Add support to set drive impedance from device tree in phy-rockchip-emmc.c
*) Add support to power up/down the VBUS voltage rail in phy-fsl-imx8mq-usb.c
*) Add support to shut off regulators that power UFS during system suspend
*) Re-design phy-rcar-gen3-usb2.c to create separate PHY instances for each
channel which helps to enable/disable interrupts for each instance
independently
*) Fix PCIe power up sequence to follow the TRM in order to ensure the DPLL &
PHY operates correctly over the entire temperature range.
*) Use devm_clk_get_optional to get optional clocks instead of adding
custom error checks
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-----BEGIN PGP SIGNATURE-----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=BAzr
-----END PGP SIGNATURE-----
Merge tag 'phy-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next
Kishon writes:
phy: for 5.2
*) Add a new *release* phy_ops invoked when the consumer relinquishes PHY
that can be used to undo the operation performed in xlate
*) Add new driver to support USB2 PHY and shared USB3 + PCIE PHY in Amlogic
G12A SoC Family.
*) Add new driver to support for Broadcom's Stingray USB PHY (Type 1 has
one super speed PHY and one high speed PHY, Type 2 has one high speed PHY)
*) Add new driver to support USB PHY in hi3660 SoC of Hisilicon
*) Add new driver to support UFS M-PHY in MediaTek SoC
*) Add new driver to support XUSB pad controller in Tegra186 SoCs
*) Add new driver to support SERDES in TI's AM654 platform
*) Add support for generation 2 USB2 PHY and gneration 3 USB2 PHY in r8a77470
to phy-rcar-gen2.c and phy-rcar-gen3-usb2.c respectively
*) Add support for PCIe QMP PHY support in msm8998 to phy-qcom-qmp.c
*) Add support for SERDES6G in phy-ocelot-serdes.c
*) Add support to set drive impedance from device tree in phy-rockchip-emmc.c
*) Add support to power up/down the VBUS voltage rail in phy-fsl-imx8mq-usb.c
*) Add support to shut off regulators that power UFS during system suspend
*) Re-design phy-rcar-gen3-usb2.c to create separate PHY instances for each
channel which helps to enable/disable interrupts for each instance
independently
*) Fix PCIe power up sequence to follow the TRM in order to ensure the DPLL &
PHY operates correctly over the entire temperature range.
*) Use devm_clk_get_optional to get optional clocks instead of adding
custom error checks
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* tag 'phy-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: (51 commits)
dt-bindings: phy-qcom-qmp: Tweak qcom,msm8998-qmp-ufs-phy
dt-bindings: phy-qcom-qmp: Add qcom,msm8998-qmp-pcie-phy
phy: Add usb phy support for hi3660 Soc of Hisilicon
dt-bindings: phy: Add support for HiSilicon's hi3660 USB PHY
scsi: phy: mediatek: fix typo in author's email address
phy: ocelot-serdes: Add support for SERDES6G muxing
phy: fsl-imx8mq-usb: add support for VBUS power control
dt-bindings: phy-imx8mq-usb: add optional vbus supply regulator
phy: qcom-qmp: Add msm8998 PCIe QMP PHY support
phy: ti: am654-serdes: Support all clksel values
phy: ti: Add a new SERDES driver for TI's AM654x SoC
dt-bindings: phy: ti: Add dt binding documentation for SERDES in AM654x SoC
phy: core: Invoke pm_runtime_get_*/pm_runtime_put_* before invoking reset callback
phy: core: Add *release* phy_ops invoked when the consumer relinquishes PHY
phy: phy-meson-gxl-usb2: get optional clock by devm_clk_get_optional()
phy: socionext: get optional clock by devm_clk_get_optional()
phy: qcom-qusb2: get optional clock by devm_clk_get_optional()
phy: phy-mtk-tphy: get optional clock by devm_clk_get_optional()
phy: renesas: rcar-gen3-usb2: enable/disable independent irqs
phy: renesas: rcar-gen3-usb2: Use pdev's device pointer on dev_vdbg()
...
Some synthesis time configuration parameters of the DMA controller can be
inferred from the hardware itself.
Use this information as it is more reliably than the information specified
in the devicetree which might be outdated if the HDL project got changed.
Deprecate the devicetree properties that can be inferred from the hardware
itself.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
UAPI Changes:
- Document which feature flags belong to which command in virtio_gpu.h
- Make the FB_DAMAGE_CLIPS available for atomic userspace only, it's useless for legacy.
Cross-subsystem Changes:
- Add device tree bindings for lg,acx467akm-7 panel and ST-Ericsson Multi Channel Display Engine MCDE
- Add parameters to the device tree bindings for tfp410
- iommu/io-pgtable: Add ARM Mali midgard MMU page table format
- dma-buf: Only do a 64-bits seqno compare when driver explicitly asks for it, else wraparound.
- Use the 64-bits compare for dma-fence-chains
Core Changes:
- Make the fb conversion functions use __iomem dst.
- Rename drm_client_add to drm_client_register
- Move intel_fb_initial_config to core.
- Add a drm_gem_objects_lookup helper
- Add drm_gem_fence_array helpers, and use it in lima.
- Add drm_format_helper.c to kerneldoc.
Driver Changes:
- Add panfrost driver for mali midgard/bitfrost.
- Converts bochs to use the simple display type.
- Small fixes to sun4i, tinydrm, ti-fp410.
- Fid aspeed's Kconfig options.
- Make some symbols/functions static in lima, sun4i and meson.
- Add a driver for the lg,acx467akm-7 panel.
-----BEGIN PGP SIGNATURE-----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=7Hyr
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-04-18' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.2:
UAPI Changes:
- Document which feature flags belong to which command in virtio_gpu.h
- Make the FB_DAMAGE_CLIPS available for atomic userspace only, it's useless for legacy.
Cross-subsystem Changes:
- Add device tree bindings for lg,acx467akm-7 panel and ST-Ericsson Multi Channel Display Engine MCDE
- Add parameters to the device tree bindings for tfp410
- iommu/io-pgtable: Add ARM Mali midgard MMU page table format
- dma-buf: Only do a 64-bits seqno compare when driver explicitly asks for it, else wraparound.
- Use the 64-bits compare for dma-fence-chains
Core Changes:
- Make the fb conversion functions use __iomem dst.
- Rename drm_client_add to drm_client_register
- Move intel_fb_initial_config to core.
- Add a drm_gem_objects_lookup helper
- Add drm_gem_fence_array helpers, and use it in lima.
- Add drm_format_helper.c to kerneldoc.
Driver Changes:
- Add panfrost driver for mali midgard/bitfrost.
- Converts bochs to use the simple display type.
- Small fixes to sun4i, tinydrm, ti-fp410.
- Fid aspeed's Kconfig options.
- Make some symbols/functions static in lima, sun4i and meson.
- Add a driver for the lg,acx467akm-7 panel.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/737ad994-213d-45b5-207a-b99d795acd21@linux.intel.com
Lochnagar is an evaluation and development board for Cirrus
Logic Smart CODEC and Amp devices. It allows the connection of
most Cirrus Logic devices on mini-cards, as well as allowing
connection of various application processor systems to provide a
full evaluation platform. This driver supports the board
controller chip on the Lochnagar board.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This adds device tree bindings for the Intel IXP4xx AHB
Queue Manager.
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This adds DT bindings for the Intel IXP4xx Network Processing
Engine (NPE). These are three firmware-executing units found in
the IXP4xx SoC. These bindings use YAML.
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This adds initial device tree bindings for the IXP4xx machines.
This time I tried something wild and crazy and try to make proper
JSON-style YAML bindings for the top level.
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This adds device tree bindings for the Intel IXP4xx
timers.
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This adds device tree bindings for the IXP4xx interrupt
controller. It's a standard 2-cell controller.
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
