commit c2fb8a3fa2 upstream.
This patch (as1558) fixes a problem affecting several ASUS computers:
The machine crashes or corrupts memory when going into suspend if the
ehci-hcd driver is bound to any controllers. Users have been forced
to unbind or unload ehci-hcd before putting their systems to sleep.
After extensive testing, it was determined that the machines don't
like going into suspend when any EHCI controllers are in the PCI D3
power state. Presumably this is a firmware bug, but there's nothing
we can do about it except to avoid putting the controllers in D3
during system sleep.
The patch adds a new flag to indicate whether the problem is present,
and avoids changing the controller's power state if the flag is set.
Runtime suspend is unaffected; this matters only for system suspend.
However as a side effect, the controller will not respond to remote
wakeup requests while the system is asleep. Hence USB wakeup is not
functional -- but of course, this is already true in the current state
of affairs.
A similar patch has already been applied as commit
151b612847 (USB: EHCI: fix crash during
suspend on ASUS computers). The patch supersedes that one and reverts
it. There are two differences:
The old patch added the flag at the USB level; this patch
adds it at the PCI level.
The old patch applied to all chipsets with the same vendor,
subsystem vendor, and product IDs; this patch makes an
exception for a known-good system (based on DMI information).
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Dâniel Fraga <fragabr@gmail.com>
Tested-by: Andrey Rahmatullin <wrar@wrar.name>
Tested-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5b6e9bcdeb upstream.
Commit 4231d47e6fe69f061f96c98c30eaf9fb4c14b96d(net/usbnet: avoid
recursive locking in usbnet_stop()) fixes the recursive locking
problem by releasing the skb queue lock before unlink, but may
cause skb traversing races:
- after URB is unlinked and the queue lock is released,
the refered skb and skb->next may be moved to done queue,
even be released
- in skb_queue_walk_safe, the next skb is still obtained
by next pointer of the last skb
- so maybe trigger oops or other problems
This patch extends the usage of entry->state to describe 'start_unlink'
state, so always holding the queue(rx/tx) lock to change the state if
the referd skb is in rx or tx queue because we need to know if the
refered urb has been started unlinking in unlink_urbs.
The other part of this patch is based on Huajun's patch:
always traverse from head of the tx/rx queue to get skb which is
to be unlinked but not been started unlinking.
Signed-off-by: Huajun Li <huajun.li.lee@gmail.com>
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Cc: Oliver Neukum <oneukum@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The control request will be used by the host to enable/disable USB audio
and the ioctl will be used by userspace to read the audio mode
Signed-off-by: Mike Lockwood <lockwood@google.com>
commit 151b612847 upstream.
This patch (as1545) fixes a problem affecting several ASUS computers:
The machine crashes or corrupts memory when going into suspend if the
ehci-hcd driver is bound to any controllers. Users have been forced
to unbind or unload ehci-hcd before putting their systems to sleep.
After extensive testing, it was determined that the machines don't
like going into suspend when any EHCI controllers are in the PCI D3
power state. Presumably this is a firmware bug, but there's nothing
we can do about it except to avoid putting the controllers in D3
during system sleep.
The patch adds a new flag to indicate whether the problem is present,
and avoids changing the controller's power state if the flag is set.
Runtime suspend is unaffected; this matters only for system suspend.
However as a side effect, the controller will not respond to remote
wakeup requests while the system is asleep. Hence USB wakeup is not
functional -- but of course, this is already true in the current state
of affairs.
This fixes Bugzilla #42728.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Steven Rostedt <rostedt@goodmis.org>
Tested-by: Andrey Rahmatullin <wrar@wrar.name>
Tested-by: Oleksij Rempel (fishor) <bug-track@fisher-privat.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d9f5343e35 upstream.
Somehow we ended up with duplicate hub feature #defines in ch11.h.
Tatyana Brokhman first created the USB 3.0 hub feature macros in 2.6.38
with commit 0eadcc0920 "usb: USB3.0 ch11
definitions". In 2.6.39, I modified a patch from John Youn that added
similar macros in a different place in the same file, and committed
dbe79bbe9d "USB 3.0 Hub Changes".
Some of the #defines used different names for the same values. Others
used exactly the same names with the same values, like these gems:
#define USB_PORT_FEAT_BH_PORT_RESET 28
...
#define USB_PORT_FEAT_BH_PORT_RESET 28
According to my very geeky husband (who looked it up in the C99 spec),
it is allowed to have object-like macros with duplicate names as long as
the replacement list is exactly the same. However, he recalled that
some compilers will give warnings when they find duplicate macros. It's
probably best to remove the duplicates in the stable tree, so that the
code compiles for everyone.
The macros are now fixed to move the feature requests that are specific
to USB 3.0 hubs into a new section (out of the USB 2.0 hub feature
section), and use the most common macro name.
This patch should be backported to 2.6.39.
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Tatyana Brokhman <tlinder@codeaurora.org>
Cc: John Youn <johnyoun@synopsys.com>
Cc: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 18b7ede5f7 upstream.
[ removed the dwc3 portion of the patch as it didn't apply to
older kernels - gregkh]
According to USB 3.0 Specification Table 9-22, if
bmAttributes [4:0] are set to zero, it means "no
streams supported", but the way this helper was
defined on Linux, we will *always* have one stream
which might cause several problems.
For example on DWC3, we would tell the controller
endpoint has streams enabled and yet start transfers
with Stream ID set to 0, which would goof up the host
side.
While doing that, convert the macro to an inline
function due to the different checks we now need.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 276532ba96 upstream.
The Kirkwood gave an unaligned memory access error on
line 742 of drivers/usb/host/echi-hcd.c:
"ehci->last_periodic_enable = ktime_get_real();"
Signed-off-by: Harro Haan <hrhaan@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It is possible that while one driver has already suspended,
another driver calls otg_id_notify() because it has not yet been
suspended. It would then be possible for the suspended driver's
detect callback to be called. This is undesirable.
Introduce new otg_id_suspend/otg_id_resume functions that
keep a suspended count, and if a notification happens while
someone is suspended, that notification is deferred until
all the drivers are resumed. If the notification happens before
the last driver is suspended, that suspend will be aborted
and once the final driver resumes through otg_id_resume, the
notification will be delivered.
Change-Id: I32fd32bec65e366e5f97a25c15255d94773b85b3
Signed-off-by: Dima Zavin <dima@android.com>
Some otg_id handlers can detect what's connected but can't detect a change.
This allows that handler to pass off the waiting for ID change to a proxy.
Change-Id: Ib38b750c3da4bffc35e37b620ecee37c5d64d31f
Signed-off-by: Erik Gilling <konkers@android.com>
MTP_SEND_FILE_WITH_HEADER ioctl allows sending a file with the 12 byte header
prepended at the beginning.
This is to allow MTP to use a single packet for the data phase instead of two.
Signed-off-by: Mike Lockwood <lockwood@android.com>
Add a otg_id notifier to allow multiple drivers to cooperate to
determine the type of cable connected to a USB connector without
requiring direct calls between the drivers.
Change-Id: Ic5675f1a89daf85b17336765de24e4bdb6df6348
Signed-off-by: Colin Cross <ccross@android.com>
This is the same as MTP but with PTP interface descriptor.
Also removed obsolete ioctl for switching between MTP and PTP mode
Signed-off-by: Mike Lockwood <lockwood@android.com>
* Functions and the device descriptor are configured from user space:
echo 0 > /sys/class/android_usb/android0/enable
echo adb,acm > /sys/class/android_usb/android0/functions
echo 2 > /sys/class/android_usb/android0/f_acm/instances
echo 1 > /sys/class/android_usb/android0/enable
* Driver does not require platform data anymore
* Moved function initialization to android.c instead of each
function file
* Replaced switches by uevents
Signed-off-by: Benoit Goby <benoit@android.com>
Signed-off-by: Mike Lockwood <lockwood@android.com>
Change-Id: If5ad9267c111ad0a442f0d87a0d31082dc5381b6
This allows composite drivers to dynamically change their configuration.
For example, a driver might remove a configuration and register a new
one with a different set of functions.
User should prevent the host from enumerating the device while changing
the configuration:
usb_gadget_disconnect(cdev->gadget);
usb_remove_config(cdev, old_config);
usb_add_config(cdev, new_config, new_conf_bind);
usb_gadget_connect(cdev->gadget);
Change-Id: Icbfb4ce41685fde9bf63d5d58fca1ad242aa69f9
Signed-off-by: Benoit Goby <benoit@android.com>
Signed-off-by: Mike Lockwood <lockwood@android.com>
USB: gadget: f_accessory: Misc improvements and cleanup:
- Add URI string
- Replace type string with a description string
- Add a control call to retrieve accessory protocol version (currently 1)
- Driver read() and write() calls now fail after USB disconnect until
driver file is closed and reopened.
- Misc cleanup work
Signed-off-by: Mike Lockwood <lockwood@android.com>
USB: gadget: f_accessory: Clear accessory strings when USB is disconnected
Signed-off-by: Mike Lockwood <lockwood@android.com>
USB: gadget: f_accessory: Clear previous strings on ACCESSORY_GET_PROTOCOL
Clearing strings on disconnect does not work since we may receive
a disconnect on some devices when transitioning into accessory mode.
We require an accessory to send ACCESSORY_GET_PROTOCOL before
sending any strings, so any strings from a previous session will be cleared.
Signed-off-by: Mike Lockwood <lockwood@android.com>
USB: gadget: f_accessory: Clear disconnected flag when driver file is opened
Fixes a race condition that can occur when entering accessory mode.
Signed-off-by: Mike Lockwood <lockwood@android.com>
USB: gadget: f_accessory: Add string for accessory's unique serial number
Signed-off-by: Mike Lockwood <lockwood@android.com>
USB: gadget: f_accessory: Set bNumEndpoints to correct value of 2
Change-Id: I24f4e36f196d45436e0573301500c3b93215953d
Signed-off-by: Mike Lockwood <lockwood@android.com>
Based on the list of enabled USB functions, we can now switch the vendor ID
as well as the product ID.
Signed-off-by: Mike Lockwood <lockwood@android.com>
- Added multiple ACM instance support in Android gadget
- Fixed multiple instance naming issue in ACM function
- Increased max instances from 4 to 8
Change-Id: I65f1b0be94da859bab7ec0ad7cd804b896c7c4c5
Signed-off-by: John Michelau <john.michelau@motorola.com>
For backward compatibility with PTP, MTP is limited to a 32-bit file size.
When transferring files greater than 4 gig, MTP uses 0xFFFFFFFF as the file size
and the receiver reads until it receives a short packet.
Expanded size of mtp_file_range.length to 64 bits and added support for
writing zero length packets.
Signed-off-by: Mike Lockwood <lockwood@android.com>
Use this rather than calling usb_gadget_disconnect and usb_gadget_connect
directly to avoid sending USB disconnect events to userspace when resetting
the bus.
Signed-off-by: Mike Lockwood <lockwood@android.com>
Add switch to notify current USB configuration. This can be used to detect
USB connect and disconnect events.
Broadcast a change via the usb_composite class when a USB function is
enabled or disabled.
Rename usb_function.hidden to usb_function.disabled.
Signed-off-by: Mike Lockwood <lockwood@android.com>
USB: android gadget: add remote wakeup attribute to android function
Add remote wakeup attribute to configuration descriptor of android
function to advertise remote wakeup capability to host
Acked-by: Allam, Suresh Reddy <sallam@qualcomm.com>
Signed-off-by: Mike Lockwood <lockwood@android.com>
USB: gadget: android: Allow functions to handle setup requests.
Signed-off-by: Mike Lockwood <lockwood@android.com>
Support for specifying the list of USB functions from platform data.
The main android.c gadget driver no longer has hard coded references
to the mass_storage and adb functions.
Support for computing the product ID based on tables in platform data
and the currently enabled functions.
Moved the adb enable/disable logic from android.c to f_adb.c.
Change-Id: I6259d3fb1473ed973f700e55d17744956f3527bb
Signed-off-by: Mike Lockwood <lockwood@android.com>
Change-Id: I4101540916b73a5f4e48684727ff782f98b969c7
Signed-off-by: Mike Lockwood <lockwood@android.com>
USB: android gadget: add remote wakeup attribute to android function
Add remote wakeup attribute to configuration descriptor of android
function to advertise remote wakeup capability to host
Acked-by: Allam, Suresh Reddy <sallam@qualcomm.com>
Signed-off-by: Mike Lockwood <lockwood@android.com>
usb gadget: link fixes for android composite gadget
Signed-off-by: Mike Lockwood <lockwood@android.com>
usb gadget: Fix null pointer errors in android composite driver
Signed-off-by: Mike Lockwood <lockwood@android.com>
usb: gadget: android: Allow usb charging to draw up to 500mA instead of 250.
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
usb gadget: android: Add helper function for usb_gadget_connect and disconnect.
Signed-off-by: Mike Lockwood <lockwood@android.com>
drivers: usb: gadget: call switch_dev_unregister in mass storage unbind callback
This fixes a problem unloading the android gadget driver when built as a module
Signed-off-by: Mike Lockwood <lockwood@android.com>
usb: gadget: android: Add dependency on switch driver.
Signed-off-by: Mike Lockwood <lockwood@android.com>
USB: gadget: android: Fix USB WHQL Certification Issues
Submitted on behalf of RaviKumar Vembu <ravi.v@motorola.com>
Signed-off-by: Jared Suttles <jared.suttles@motorola.com>
Signed-off-by: Mike Lockwood <lockwood@android.com>
drivers: usb: gadget: Add "usb_mass_storage" platform driver.
This will be used for configuring vendor, product and release from board file.
Submitted on behalf of RaviKumar Vembu <ravi.v@motorola.com>
Signed-off-by: Jared Suttles <jared.suttles@motorola.com>
Signed-off-by: Mike Lockwood <lockwood@android.com>
drivers: usb: gadget: Use usb_mass_storage platform device as parent for lun
If a platform device is specified for the f_mass_storage function, use it as the
parent driver for the lun files in sysfs.
This allows a platform independent file path for controlling USB mass storage
from user space.
Signed-off-by: Mike Lockwood <lockwood@android.com>
drivers: usb: gadget: Add platform data struct for usb_mass_storage device
Signed-off-by: Mike Lockwood <lockwood@android.com>
usb: gadget: mass_storage: Fix Mass Storage Panic during PC reboot
Submitted on behalf of RaviKumar Vembu <ravi.v@motorola.com>
Signed-off-by: Jared Suttles <jared.suttles@motorola.com>
Signed-off-by: Mike Lockwood <lockwood@android.com>
usb: gadget: f_mass_storage: Handle setup request correctly
Signed-off-by: Mike Lockwood <lockwood@android.com>
usb: gadget: f_mass_storage: Clean up wakelocks on error paths
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
Signed-off-by: Mike Lockwood <lockwood@android.com>
* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (205 commits)
USB: EHCI: Remove SPARC_LEON {read,write}_be definitions from ehci.h
USB: UHCI: Support big endian GRUSBHC HC
sparc: add {read,write}*_be routines
USB: UHCI: Add support for big endian descriptors
USB: UHCI: Use ACCESS_ONCE rather than using a full compiler barrier
USB: UHCI: Add support for big endian mmio
usb-storage: Correct adjust_quirks to include latest flags
usb/isp1760: Fix possible unlink problems
usb/isp1760: Move function isp1760_endpoint_disable() within file.
USB: remove remaining usages of hcd->state from usbcore and fix regression
usb: musb: ux500: add configuration and build options for ux500 dma
usb: musb: ux500: add dma glue layer for ux500
usb: musb: ux500: add dma name for ux500
usb: musb: ux500: add ux500 specific code for gadget side
usb: musb: fix compile error
usb-storage: fix up the unusual_realtek device list
USB: gadget: f_audio: Fix invalid dereference of initdata
EHCI: don't rescan interrupt QHs needlessly
OHCI: fix regression caused by nVidia shutdown workaround
USB: OTG: msm: Free VCCCX regulator even if we can't set the voltage
...
Some USB function drivers (e.g. f_mass_storage.c) need to delay or defer the
data/status stages of standard control requests like SET_CONFIGURATION or
SET_INTERFACE till they are done with their bookkeeping and are actually ready
for accepting new commands to their interface.
They can now achieve this functionality by returning USB_GADGET_DELAYED_STATUS
in their setup handlers (e.g. set_alt()). The composite framework will then
defer completion of the control transfer by not completing the data/status stages.
This ensures that the host does not send new packets to the interface till the
function driver is ready to take them.
When the function driver that requested for USB_GADGET_DELAYED_STATUS is done
with its bookkeeping, it should signal the composite framework to continue with
the data/status stages of the control transfer. It can do so by invoking
the new API usb_composite_setup_continue(). This is where the control transfer's
data/status stages are completed and host can initiate new transfers.
The DELAYED_STATUS mechanism is currently only supported if the expected data phase
is 0 bytes (i.e. w_length == 0). Since SET_CONFIGURATION and SET_INTERFACE are the
only cases that will use this mechanism, this is not a limitation.
Signed-off-by: Roger Quadros <roger.quadros@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Implement good battery algorithm defined in the battery charging V1.2 spec
for detecting different charging ports. USB hardware is put into low power
mode when connected to a dedicated charging port. vbus_draw and set_power
methods are implemented for determining the allowed current from Host in
different states (un-configured/suspend/configured).
The charger block is implemented using vendor specific registers and the
PHY used in MSM8960(28nm PHY) different from older targets like MSM8x60
and MSM7x30(45nm PHY). The PHY vendor and product id registers are not
implemented in the above chipsets. Hence PHY type is passed via platform
data.
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
HSUSB core clock is derived from daytona fabric clock and for
HSUSB operational require minimum core clock at 55MHz. Since, HSUSB
cannot tolerate daytona fabric clock change in the middle of HSUSB
operational, vote for maximum Daytona fabric clock
while usb is operational
Signed-off-by: Anji jonnala <anjir@codeaurora.org>
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Commit 3dacdf11 "usb: factor out state_string() on otg drivers"
broke building musb drivers since there is already another
otg_state_string() function in musb drivers, but with different
prototype. Fix musb drivers to use common otg_state_string(), too.
Also provide a nop for otg_state_string() if CONFIG_USB_OTG_UTILS
is not defined.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The two first HC capability registers (CAPLENGTH and HCIVERSION)
are defined as one 8-bit and one 16-bit register. Most HC
implementations have selected to treat these registers as part
of a 32-bit register, giving the same layout for both big and
small endian systems.
This patch adds a new quirk, big_endian_capbase, to support
controllers with big endian register interfaces that treat
HCIVERSION and CAPLENGTH as individual registers.
Signed-off-by: Jan Andersson <jan@gaisler.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As pointed out by Arnd Bergmann, in include/linux/usb/ehci_def.h, struct
ehci_caps is defined with __attribute__((packed)) for no good reason,
and this triggers undefined behaviour when using ARM's readl() on
pointers to elements of this structure:
http://lkml.kernel.org/r/201102021700.20683.arnd@arndb.de
The same problem exists with the other two structures in ehci_def.h too,
so remove the __attribute__((packed)) from all of them.
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* 'for-usb-next' of git+ssh://master.kernel.org/pub/scm/linux/kernel/git/sarah/xhci:
xhci 1.0: Set transfer burst last packet count field.
xhci 1.0: Set transfer burst count field.
xhci 1.0: Update TD size field format.
xhci 1.0: Only interrupt on short packet for IN EPs.
xhci: Remove sparse warning about cmd_status.
usbcore: warm reset USB3 port in SS.Inactive state
usbcore: Refine USB3.0 device suspend and resume
xHCI: report USB3.0 portstatus comply with USB3.0 specification
xHCI: Set link state support
xHCI: Clear link state change support
xHCI: warm reset support
usb/ch9: use proper endianess for wBytesPerInterval
xhci: Remove recursive call to xhci_handle_event
xhci: Add an assertion to check for virt_dev=0 bug.
xhci: Add rmb() between reading event validity & event data access.
xhci: Make xHCI driver endian-safe
