When calculating phase steps, let's use the same enum
mdp_component_type in order to ease the readability; 0/1 indexes
are a bit confusing and we now have explicit values to index
this type of arrays.
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The HDMI controller is new in MDP5 v1.7. As of now, this change
doesn't reflect the novelty and only adds the basics so the probe
gets triggered.
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The current behavior is to try to get optional clocks and print a
dev_err message in case of failure. This looks rather confusing
and may increase with the amount of optional clocks.
We may need a cleaner way to handle per-device clocks but in the
meantime, let's reduce the amount of dev_err messages during the
probe.
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
msm_iommu_new() can fail and this change makes sure that we
detect the failure and free the allocated domain before going
any further.
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
We want to make sure we control all the information being passed
down to SMP block. Having access to the cfg pointer here may create
bad things in the future.
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The current settings for 28nm PHY data lane CFG4 registers do
not work with certain panels. This change is to modify them to
hw recommended values.
Signed-off-by: Hai Li <hali@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
In some configurations the supplies are voltage switches and not LDOs,
making the set voltage call to fail. Check with the regulator framework
if the supply can change voltage before attempting.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The annotate__configs should be sorted so that it can use bsearch(3).
However commit 0c4a5bcea4 ("perf annotate: Display total number of
samples with --show-total-period") added a new config item at the end.
This resulted in the 'annotate.use_offset' config variable cannot be
found and perf terminated like below:
$ perf report
bad config file line 6 in ~/.perfconfig
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Taeung Song <treeze.taeung@gmail.com>
Fixes: 0c4a5bcea4 ("perf annotate: Display total number of samples with --show-total-period")
Link: http://lkml.kernel.org/r/1445396240-3428-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --call-graph option is complex so we should provide better guide for
users. Also change help message to be consistent with config option
names. Now perf top will show help like below:
$ perf top --call-graph
Error: option `call-graph' requires a value
Usage: perf top [<options>]
--call-graph <record_mode[,record_size],print_type,threshold[,print_limit],order,sort_key[,branch]>
setup and enables call-graph (stack chain/backtrace):
record_mode: call graph recording mode (fp|dwarf|lbr)
record_size: if record_mode is 'dwarf', max size of stack recording (<bytes>)
default: 8192 (bytes)
print_type: call graph printing style (graph|flat|fractal|none)
threshold: minimum call graph inclusion threshold (<percent>)
print_limit: maximum number of call graph entry (<number>)
order: call graph order (caller|callee)
sort_key: call graph sort key (function|address)
branch: include last branch info to call graph (branch)
Default: fp,graph,0.5,caller,function
Requested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1445524112-5201-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Enable on-chip audio codec on the Marsboard A10.
Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
All callers use locks_lock_inode_wait() instead.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Instead of having users check for FL_POSIX or FL_FLOCK to call the correct
locks API function, use the check within locks_lock_inode_wait(). This
allows for some later cleanup.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Users of the locks API commonly call either posix_lock_file_wait() or
flock_lock_file_wait() depending upon the lock type. Add a new function
locks_lock_inode_wait() which will check and call the correct function for
the type of lock passed in.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
The caller callchain order is useful with --children option since it can
show 'overview' style output, but other commands which don't use
--children feature like 'perf script' or even 'perf report/top' without
--children are better to keep callee order.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1445499946-29817-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently 'perf top --call-graph' option is same as 'perf record'. But
'perf top' also need to receive display options in 'perf report'. To do
that, change parse_callchain_report_opt() to allow record options too.
Now perf top can receive display options like below:
$ perf top --call-graph
Error: option `call-graph' requires a value
Usage: perf top [<options>]
--call-graph
<mode[,dump_size],output_type,min_percent[,print_limit],call_order[,branch]>
setup and enables call-graph (stack chain/backtrace)
recording: fp dwarf lbr, output_type (graph, flat,
fractal, or none), min percent threshold, optional
print limit, callchain order, key (function or
address), add branches
$ perf top --call-graph callee,graph,fp
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1445495330-25416-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These messages will be used by 'perf top' in the next patch.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1445495330-25416-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commits such as 65dd297ac2 ("xfs: %pF is only for function
pointers") caused a regression because pretty_print() didn't support
%ps/%pS. The current %pf/%pF implementation in pretty_print() is what
%ps/%pS is supposed to do, so use the same code for %ps/%pS.
Addressing the incorrect %pf/%pF implementation is beyond the scope of
this patch.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Dave Chinner <david@fromorbit.com>
Link: http://lkml.kernel.org/r/20150831211637.GA12848@home.buserror.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch changes return type of pstore_is_mounted from int to bool.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Device stopped to tuning some channels after regmap conversion.
Reason is that regmap_update_bits() works a bit differently for
partially volatile registers than old homemade routine. Return
back to old routine in order to fix issue.
Fixes: 478932b160
Cc: <stable@kernel.org> # 4.2+
Reported-by: Mark Clarkstone <hello@markclarkstone.co.uk>
Tested-by: Mark Clarkstone <hello@markclarkstone.co.uk>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Add lock to prevent concurrent access for control message as control
message function uses shared buffer. Without the lock there may be
remote control polling which messes the buffer causing IO errors.
Increase buffer size and add check for maximum supported message
length.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=103391
Fixes: c56222a6b2 ("[media] rtl28xxu: move usb buffers to state")
Cc: <stable@vger.kernel.org> # 4.0+
Signed-off-by: Antti Palosaari <crope@iki.fi>
Fixes the following randconfig problem:
drivers/built-in.o: In function `v4l2_flash_release':
(.text+0x12204f): undefined reference to `v4l2_async_unregister_subdev'
drivers/built-in.o: In function `v4l2_flash_release':
(.text+0x122057): undefined reference to `v4l2_ctrl_handler_free'
drivers/built-in.o: In function `v4l2_flash_close':
v4l2-flash-led-class.c:(.text+0x12208f): undefined reference to `v4l2_fh_is_singular'
v4l2-flash-led-class.c:(.text+0x1220c8): undefined reference to `__v4l2_ctrl_s_ctrl'
drivers/built-in.o: In function `v4l2_flash_open':
v4l2-flash-led-class.c:(.text+0x12227f): undefined reference to `v4l2_fh_is_singular'
drivers/built-in.o: In function `v4l2_flash_init_controls':
v4l2-flash-led-class.c:(.text+0x12274e): undefined reference to `v4l2_ctrl_handler_init_class'
v4l2-flash-led-class.c:(.text+0x122797): undefined reference to `v4l2_ctrl_new_std_menu'
v4l2-flash-led-class.c:(.text+0x1227e0): undefined reference to `v4l2_ctrl_new_std'
v4l2-flash-led-class.c:(.text+0x122826): undefined reference to `v4l2_ctrl_handler_setup'
v4l2-flash-led-class.c:(.text+0x122839): undefined reference to `v4l2_ctrl_handler_free'
drivers/built-in.o: In function `v4l2_flash_init':
(.text+0x1228e2): undefined reference to `v4l2_subdev_init'
drivers/built-in.o: In function `v4l2_flash_init':
(.text+0x12293b): undefined reference to `v4l2_async_register_subdev'
drivers/built-in.o: In function `v4l2_flash_init':
(.text+0x122949): undefined reference to `v4l2_ctrl_handler_free'
drivers/built-in.o:(.rodata+0x20ef8): undefined reference to `v4l2_subdev_queryctrl'
drivers/built-in.o:(.rodata+0x20f10): undefined reference to `v4l2_subdev_querymenu'
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Sakari Ailus <sakari.ailus@iki.fi>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
When reading the firmware and sending commands, the length must
be bounds checked to avoid overrunning the size of the command
buffer and smashing the stack if the firmware is not in the expected
format:
si2168 11-0064: found a 'Silicon Labs Si2168-B40'
si2168 11-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
si2168 11-0064: firmware download failed -95
Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffffa085708f
Add the proper check.
Cc: stable@kernel.org
Reported-by: Stuart Auchterlonie <sauchter@redhat.com>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Laura Abbott <labbott@fedoraproject.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
When reading the firmware and sending commands, the length
must be bounds checked to avoid overrunning the size of the command
buffer and smashing the stack if the firmware is not in the
expected format. Add the proper check.
Cc: stable@kernel.org
Signed-off-by: Laura Abbott <labbott@fedoraproject.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This driver doesn't claim the IR transmitter to be wakeup source. It
even disables the clock and the IR during suspend-resume cycle.
This patch removes yet another misuse of IRQF_NO_SUSPEND.
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Guoxiong Yan <yanguoxiong@huawei.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The variable err was never initialized, that means we had been checking
a garbage value in the for loop. Moreover if the segment is not outside
the firmware file then also we have been returning the garbage.
Initialize it to 0 so that on success we return the value and no need to
check in the for loop also as it is initially 0 and whenever that value
changes we have done a break from the loop.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
static analysis with cppcheck detected the following error:
[drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c:1210]:
(error) Uninitialized variable: ret
ret is never initialised, so garbage is being returned. Instead
return the error return from the call of request_firmware_nowait
Signed-off-by: Colin Ian King <colin.king@canonical.com>
If CONFIG_DVB_LNBH25 is disabled, a stub static inline function is
defined that just prints a warning about the driver being disabled
but the function return type was wrong which caused a build error.
Fixes: e025273b86 ("[media] lnbh25: LNBH25 SEC controller driver")
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
If CONFIG_DVB_HORUS3A is disabled a stub static inline function is
defined that just prints a warning about the driver being disabled
but the function parameters were wrong which caused a build error.
Fixes: a5d32b3582 ("[media] horus3a: Sony Horus3A DVB-S/S2 tuner driver")
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
- Add support for severals Armada-370-based Seagate NAS
- Fix Ready NAS device tree
- Modify SDHCI binding for A388-GP allowing using it on old and new
version of the board
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlYhOjIACgkQCwYYjhRyO9VTWACeJDBHZ1+ojF5irnZzNe/9PKaF
zJQAnjBmJxI1auTY+SQHVkZN3w2HOhwU
=Dvfj
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt-4.4-2' of git://git.infradead.org/linux-mvebu into next/dt
mvebu dt for 4.4 (part 2)
- Add support for severals Armada-370-based Seagate NAS
- Fix Ready NAS device tree
- Modify SDHCI binding for A388-GP allowing using it on old and new
version of the board
* tag 'mvebu-dt-4.4-2' of git://git.infradead.org/linux-mvebu:
ARM: mvebu: set SW polling as SDHCI card detection on A388-GP
arm: mvebu: reorder nodes under internal-regs by address in RN2120 .dts file
arm: mvebu: disable unused Armada RTC on ReadyNAS 102, 104 and 2120
ARM: mvebu: add DT support for Seagate Personal Cloud
ARM: mvebu: add DT support for Seagate NAS 2 and 4-Bay
Signed-off-by: Olof Johansson <olof@lixom.net>
Remove code related to Armada 375 Z1 stepping no more supported in mainline
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlYhNdoACgkQCwYYjhRyO9XfRgCbBLfDDVPLhhVwT+Rh4M8dsP+g
ZLYAoKI884Me01F+dIDYmJVNypuHsj/g
=YgnH
-----END PGP SIGNATURE-----
Merge tag 'mvebu-cleanup-4.4-2' of git://git.infradead.org/linux-mvebu into next/cleanup
mvebu cleanup for 4.4 (part 2)
Remove code related to Armada 375 Z1 stepping no more supported in mainline
* tag 'mvebu-cleanup-4.4-2' of git://git.infradead.org/linux-mvebu:
ARM: mvebu: remove the workaround imprecise abort fault handler
Signed-off-by: Olof Johansson <olof@lixom.net>
Fixed problem with setting spi mode 0 or 1 after setting mode 2 or 3
SPI_MODE_0 and SPI_MODE_1 requires clock low when inactive. SPI_MODE_2
and SPI_MODE_3 requires clk high when inactive.
Currently driver can just set bits in fields SCLK_PHA (SPI Clock/Data
Phase Control), SCLK_POL (SPI Clock Polarity Control),
SCLK_CTL (controls the inactive state of SCLK) ans SS_POL (SPI SS
Polarity Select) of ECSPIx_CONFIGREG register.
This patch allows driver to clear corresponding bits in these fields.
Signed-off-by: Andrew Y. Kuksov <qxovxp@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
features for arm/arm64 platforms:
- Lorenzo Pieralisi adds support for the PSCI_FEATURES call, manages
various 1.0 specifications updates (power state id and functions return
values) and provides PSCI v1.0 DT bindings
- Sudeep Holla implements PSCI v1.0 system suspend support to enable PSCI
based suspend-to-RAM
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABCAAGBQJWEmNwAAoJEIKLOaai0TZ/unUP/1+90ySUHIChaH70WrvIqJ3Z
YfueoM63cOcRNB7EFx5SrcKWh6tFgeUsT2+4WDA8j0CIvRwO6YaESvtXRHmGfwgQ
F3NWlWnJF3xiCU0kg26YQjvNll9OgQXkwCLzbsk1cdpi8hMfVL4Du8DgjREVIDff
PZ4LiGlYSqvesp+kipXzfAHgHJENXJYISkRv2VwcewOnq28B/Iode3T6Ro8dSjeR
2C9hjZsrwtRZ2lpjU2/4nLMd+On+nA9fw7XhlH/FU8HeLcNlngeQghlA30uQsIxB
1wgBEzHohBqUSSMLPSrk1nca/JV5haSeZWGacdLQ/qLUeMV9TgAB8wAXayVXUoHN
kkSoNWf5lh8ica4BkSGEPun4GY4h3Uv0AhnwCCKiVWL1eXglVklT4QRDVlyBPdXY
nWpRN5RlQLf60Zf6vZrUoRsApy1WVFGWW+GbjBKlWWImCzEDaIJ3695C7Qmj3BJ+
4mSqKE0xkQ8M8eYpS/ilKnmlh7+xNU3za9LtebV97v31+D9TNqvdXxEh0qGuasG4
BWGPptGlxqYH3RH5PrvjFGt0EZmyJ4uD/7doYrXFrXkiv/FX1tDzTAgIWswHeeG5
c4gAw/GlGq3d+oL/aydWlWW/UQYdmfLt2U+NZ3VdkVZVuF33VprJolBC8YQuQldS
2zvgsnflfrLeFayRtDf2
=rYJ6
-----END PGP SIGNATURE-----
Merge tag 'firmware/psci-1.0' of git://git.kernel.org/pub/scm/linux/kernel/git/lpieralisi/linux into next/drivers
This pull request contains patches that enable PSCI 1.0 firmware
features for arm/arm64 platforms:
- Lorenzo Pieralisi adds support for the PSCI_FEATURES call, manages
various 1.0 specifications updates (power state id and functions return
values) and provides PSCI v1.0 DT bindings
- Sudeep Holla implements PSCI v1.0 system suspend support to enable PSCI
based suspend-to-RAM
* tag 'firmware/psci-1.0' of git://git.kernel.org/pub/scm/linux/kernel/git/lpieralisi/linux:
drivers: firmware: psci: add system suspend support
drivers: firmware: psci: define more generic PSCI_FN_NATIVE macro
drivers: firmware: psci: add PSCI v1.0 DT bindings
drivers: firmware: psci: add extended stateid power_state support
drivers: firmware: psci: add PSCI_FEATURES call
drivers: firmware: psci: move power_state handling to generic code
drivers: firmware: psci: add INVALID_ADDRESS return value
Signed-off-by: Olof Johansson <olof@lixom.net>
Now that __cpuinit has been removed, the __ref markings on these
functions are useless. Remove them. This also reduces the size of
the multi_v7_defconfig image:
$ size before after
text data bss dec hex filename
12683578 1470996 348904 14503478 dd4e36 before
12683274 1470996 348904 14503174 dd4d06 after
presumably because now we don't have to jump to code in the
.ref.text section and/or the noinline marking is removed.
Cc: Shiraz Hashim <shiraz.linux.kernel@gmail.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: <linux-omap@vger.kernel.org>
Cc: <linux-arm-msm@vger.kernel.org>
Cc: <spear-devel@list.st.com>
Cc: <linux-tegra@vger.kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Barry Song <baohua@kernel.org>
Acked-by: Andy Gross <agross@codeaurora.org>
Acked-by: Viresh Kumar <vireshk@kernel.org>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
The keyboard driver for GPIO buttons(gpio-keys) checks for one of the
two boolean properties to enable gpio buttons as wakeup source:
1. "wakeup-source" or
2. the legacy "gpio-key,wakeup"
However juno, ste-snowball and emev2-kzm9d dts file have a undetected
"wakeup" property to indictate the wakeup source.
This patch fixes it by making use of "wakeup-source" property.
Cc: Magnus Damm <magnus.damm@gmail.com>
Acked-by: Simon Horman <horms@verge.net.au>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Now that the IRQCHIP_DECLARE macro has been moved to linux/irqchip.h,
it becomes possible to cleanup the open-coded versions of the same
macro that have been added to some private irqchips implementations.
Cc: Sascha Hauer <kernel@pengutronix.de>
Acked-by: Kukjin Kim <kgene@kernel.org>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
share lrck_tx to lrck_rx when symmetric_rates enabled.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
rockchip,capture-channels: max capture channels, 2 channels default.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
support max 8 channels capture, please add property
'rockchip,capture-channels' in dts to enable this,
if not, support 2 channels capture default.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add driver for the digital imput to PWM output stereo
class D amplifier. It comes with filter, digitally
controlled gain, an equalizer and a dmphase filter.
Signed-off-by: Songjun Wu <songjun.wu@atmel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
* Remove now unused legacy pm domain code
* Add missing of_node_put to pm-rmobile
* Corresct spelling of interrupt-names in renesas-memory-controller binding
documentation
* Correct signdness of CPU id in shmobile apmu implementation
* Make some functions static as appropriate
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=XNZw
-----END PGP SIGNATURE-----
Merge tag 'renesas-cleanup2-for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/cleanup
Second Round of Renesas ARM Based SoC Cleanup for v4.4
* Remove now unused legacy pm domain code
* Add missing of_node_put to pm-rmobile
* Corresct spelling of interrupt-names in renesas-memory-controller binding
documentation
* Correct signdness of CPU id in shmobile apmu implementation
* Make some functions static as appropriate
* tag 'renesas-cleanup2-for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: R-Mobile: add missing of_node_put
ARM: shmobile: dt: Rename incorrect interrupt related binding
ARM: shmobile: apmu: correct type of CPU id
ARM: shmobile: r8a7779: Remove legacy PM Domain remainings
ARM: shmobile: r8a7778: Make r8a7778_init_irq_dt() static
ARM: shmobile: smp: Make shmobile_smp_apmu_cpu_shutdown() static
Signed-off-by: Olof Johansson <olof@lixom.net>
