commit c4e4fccc5d upstream.
[Why]
According to DP spec, it should shift left 4 digits for NO_STOP_BIT
in REMOTE_I2C_READ message. Not 5 digits.
In current code, NO_STOP_BIT is always set to zero which means I2C
master is always generating a I2C stop at the end of each I2C write
transaction while handling REMOTE_I2C_READ sideband message. This issue
might have the generated I2C signal not meeting the requirement. Take
random read in I2C for instance, I2C master should generate a repeat
start to start to read data after writing the read address. This issue
will cause the I2C master to generate a stop-start rather than a
re-start which is not expected in I2C random read.
[How]
Correct the shifting value of NO_STOP_BIT for DP_REMOTE_I2C_READ case in
drm_dp_encode_sideband_req().
Changes since v1:(https://patchwork.kernel.org/patch/11312667/)
* Add more descriptions in commit and cc to stable
Fixes: ad7f8a1f9c ("drm/helper: add Displayport multi-stream helper (v0.6)")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200103055001.10287-1-Wayne.Lin@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f30e27779d upstream.
When userspace requests a video mode parameter value that is not
supported, frame buffer device drivers should round it up to a supported
value, if possible, instead of just rejecting it. This allows
applications to quickly scan for supported video modes.
Currently this rule is not followed for the number of bits per pixel,
causing e.g. "fbset -depth N" to fail, if N is smaller than the current
number of bits per pixel.
Fix this by returning an error only if bits per pixel is too large, and
setting it to the current value otherwise.
See also Documentation/fb/framebuffer.rst, Section 2 (Programmer's View
of /dev/fb*").
Fixes: 865afb1194 ("drm/fb-helper: reject any changes to the fbdev")
Cc: stable@vger.kernel.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191230132734.4538-1-geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4396393fb9 upstream.
In commit 0b8e7bbde5 ("drm/sun4i: tcon: Set min division of TCON0_DCLK
to 1.") it was assumed that all TCON variants support a minimum divider
of 1 if only DCLK was used.
However, the oldest generation of hardware only supports minimum divider
of 4 if only DCLK is used. If a divider of 1 was used on this old
hardware, some scrolling artifact would appear. A divider of 2 seemed
OK, but a divider of 3 had artifacts as well.
Set the minimum divider when outputing to parallel RGB based on the
hardware model, with a minimum of 4 for the oldest (A10/A10s/A13/A20)
hardware, and a minimum of 1 for the rest. A value is not set for the
TCON variants lacking channel 0.
This fixes the scrolling artifacts seen on my A13 tablet.
Fixes: 0b8e7bbde5 ("drm/sun4i: tcon: Set min division of TCON0_DCLK to 1.")
Cc: <stable@vger.kernel.org> # 5.4.x
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107070113.28951-1-wens@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 84c92365b2 ]
The driver forgets to call component_del in remove to match component_add
in probe.
Add the missed call to fix it.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 70082a52f9 upstream.
Without this header file, compile-testing may run into a missing
declaration:
drivers/gpu/drm/msm/msm_gpu.c:444:4: error: implicit declaration of function 'put_task_struct' [-Werror,-Wimplicit-function-declaration]
Fixes: 482f96324a ("drm/msm: Fix task dump in gpu recovery")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 57177d214e upstream.
When the HDMI unbinds drm_connector_cleanup() and drm_encoder_cleanup()
are called. This also happens when the connector and the encoder are
destroyed. This double call triggers a NULL pointer exception.
The patch fixes this by removing the cleanup calls in the unbind
function.
Cc: <stable@vger.kernel.org>
Fixes: 9c5681011a ("drm/sun4i: Add HDMI support")
Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191217124632.20820-1-stefan@olimex.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 37a68eab4c ]
Place the declaration of struct nouveau_conn_atom above that of
struct nouveau_connector. This commit makes no changes to the moved
block what so ever, it just moves it up a bit.
This is a preparation patch to fix some issues with connector handling
on pre nv50 displays (which do not use atomic modesetting).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a51d9f8fe7 ]
[Why]
In dc_link_is_dp_sink_present, if dal_ddc_open fails, then
dal_gpio_destroy_ddc is called, destroying pin_data and pin_clock. They
are created only on dc_construct, and next aux access will cause a panic.
[How]
Instead of calling dal_gpio_destroy_ddc, call dal_ddc_close.
Signed-off-by: David Galiffi <David.Galiffi@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf26da927a ]
The same workaround is used for gfx7.
Both PAL and Mesa use it for gfx8 too, so port this commit to
gfx_v8_0_ring_emit_fence_gfx.
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e807535da ]
When security violation from new vbios happens, data fabric is
risky to stop working. So prevent the direct access to DF
mmFabricConfigAccessControl from the new vbios and onwards.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17cf678a33 ]
The boolean variable pasid_mapping_needed is not initialized and
there are code paths that do not assign it any value before it is
is read later. Fix this by initializing pasid_mapping_needed to
false.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: 6817bf283b ("drm/amdgpu: grab the id mgr lock while accessing passid_mapping")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d0e3ce52c ]
The INTERRUPT_CNTL2 register expects a valid DMA address, but is
currently set with a GPU MC address. This can cause problems on
systems that detect the resulting DMA read from an invalid address
(found on a Power8 guest).
Instead, use the DMA address of the dummy page because it will always
be safe.
Fixes: 27ae10641e ("drm/amdgpu: add interupt handler implementation for si v3")
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 946ab8db69 ]
The object fence is not set to NULL after its reference is dropped. As a
result, its reference may be dropped again if error occurs after that,
which may lead to a use after free bug. To avoid the issue, fence is
explicitly set to NULL after dropping its reference.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 58f46d4b65 ]
Direct uploading save/restore list via mmio register writes breaks the security
policy. Instead, the driver should pass s&r list to psp.
For all the ASICs that use rlc v2_1 headers, the driver actually upload s&r list
twice, in non-psp ucode front door loading phase and gfx pg initialization phase.
The latter is not allowed.
VG12 is the only exception where the driver still keeps legacy approach for S&R
list uploading. In theory, this can be elimnated if we have valid srcntl ucode
for VG12.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Candice Li <Candice.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b78e70c04c ]
Currently when the gather buffers are copied, they are copied to a
buffer that is allocated for the host1x client that wants to execute the
command streams in the buffers. However, the gather buffers will be read
by the host1x device, which causes SMMU faults if the DMA API is backed
by an IOMMU.
Fix this by allocating the gather buffer copy for the host1x device,
which makes sure that it will be mapped into the host1x's IOVA space if
the DMA API is backed by an IOMMU.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24e64f86da ]
The device tree bindings for the Tegra210 SOR don't require the
controller instance to be defined, since the instance can be derived
from the compatible string. The index is never used on Tegra210, so we
got away with it not getting set. However, subsequent patches will
change that, so make sure the proper index is used.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec3b7b6eb8 ]
"clock" may be copied to "best_clock". Initializing best_clock
is not sufficient. The fix initializes clock as well to avoid
memory disclosures and informaiton leaks.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191018044150.1899-1-kjlu@umn.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fadfee3f9d ]
When setting a new display mode, dw_hdmi_setup() calls
dw_hdmi_enable_video_path(), which disables all hdmi clocks, including
the audio clock.
We should only (re-)enable the audio clock if audio was already enabled
when setting the new mode.
Without this patch, on RK3288, there will be HDMI audio on some monitors
if i2s was played to headphone when the monitor was plugged.
ACER H277HU and ASUS PB278 are two of the monitors showing this issue.
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191008102145.55134-1-cychiang@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd998291db ]
[WHY]
During detection:
function: get_active_converter_info populates link->dpcd_caps.dongle_caps
only when dpcd_rev >= DPCD_REV_11 and DWN_STRM_PORTX_TYPE is
DOWN_STREAM_DETAILED_HDMI or DOWN_STREAM_DETAILED_DP_PLUS_PLUS.
Otherwise, it is not cleared, and stale information remains.
During mode validation:
function: dp_active_dongle_validate_timing reads
link->dpcd_caps.dongle_caps->dongle_type to determine the maximum
pixel clock to support. This information is now stale and no longer
valid.
[HOW]
dp_active_dongle_validate_timing should be using
link->dpcd_caps->dongle_type instead.
Signed-off-by: David Galiffi <david.galiffi@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aed6105b28 ]
For historical reasons, the function drm_wait_vblank_ioctl always return
-EINVAL if something gets wrong. This scenario limits the flexibility
for the userspace to make detailed verification of any problem and take
some action. In particular, the validation of “if (!dev->irq_enabled)”
in the drm_wait_vblank_ioctl is responsible for checking if the driver
support vblank or not. If the driver does not support VBlank, the
function drm_wait_vblank_ioctl returns EINVAL, which does not represent
the real issue; this patch changes this behavior by return EOPNOTSUPP.
Additionally, drm_crtc_get_sequence_ioctl and
drm_crtc_queue_sequence_ioctl, also returns EINVAL if vblank is not
supported; this patch also changes the return value to EOPNOTSUPP in
these functions. Lastly, these functions are invoked by libdrm, which is
used by many compositors; because of this, it is important to check if
this change breaks any compositor. In this sense, the following projects
were examined:
* Drm-hwcomposer
* Kwin
* Sway
* Wlroots
* Wayland
* Weston
* Mutter
* Xorg (67 different drivers)
For each repository the verification happened in three steps:
* Update the main branch
* Look for any occurrence of "drmCrtcQueueSequence",
"drmCrtcGetSequence", and "drmWaitVBlank" with the command git grep -n
"STRING".
* Look in the git history of the project with the command
git log -S<STRING>
None of the above projects validate the use of EINVAL when using
drmWaitVBlank(), which make safe, at least for these projects, to change
the return values. On the other hand, mesa and xserver project uses
drmCrtcQueueSequence() and drmCrtcGetSequence(); this change is harmless
for both projects.
Change since V5 (Pekka Paalanen):
- Check if the change also affects Mutter
Change since V4 (Daniel):
- Also return EOPNOTSUPP in drm_crtc_[get|queue]_sequence_ioctl
Change since V3:
- Return EINVAL for _DRM_VBLANK_SIGNAL (Daniel)
Change since V2:
Daniel Vetter and Chris Wilson
- Replace ENOTTY by EOPNOTSUPP
- Return EINVAL if the parameters are wrong
Cc: Keith Packard <keithp@keithp.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002140516.adeyj3htylimmlmg@smtp.gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bee447e224 ]
The DDC/CI protocol involves sending a multi-byte request to the
display via I2C, which is typically followed by a multi-byte
response. The internal I2C controller only allows single byte
reads/writes or reads of 8 sequential bytes, hence DDC/CI is not
supported when the internal I2C controller is used. The I2C
transfers complete without errors, however the data in the response
is garbage. Abort transfers to/from slave address 0x37 (DDC) with
-EOPNOTSUPP, to make it evident that the communication is failing.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002124354.v2.1.I709dfec496f5f0b44a7b61dcd4937924da8d8382@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 81de29d842 ]
alloc_workqueue is not checked for errors and as a result,
a potential NULL dereference could occur.
v2 (Felix Kuehling):
* Fix compile error (kfifo_free instead of fifo_free)
* Return proper error code
Signed-off-by: Allen Pais <allen.pais@oracle.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6817bf283b ]
Need to make sure that we actually dropping the right fence.
Could be done with RCU as well, but to complicated for a fix.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2708e87627 ]
Silence two warning messages that occur due to -EPROBE_DEFER errors to
help cleanup the system boot log.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190815004854.19860-4-masneyb@onstation.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 65abbda8ed ]
Panels must be initialised with drm_panel_init(). Add the missing
function call in the panel-raspberrypi-touchscreen.c and
panel-sitronix-st7789v.c drivers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823193245.23876-2-laurent.pinchart@ideasonboard.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 008037d4d9 upstream.
Shift and mask were reversed. Noticed by chance.
Tested-by: Meelis Roos <mroos@linux.ee>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 43cb86799f upstream.
With commit 222ec1618c ("drm: Add aspect ratio parsing in DRM
layer") the drm core started honoring the picture_aspect_ratio field
when comparing two drm_display_modes. Prior to that it was ignored.
When the CVBS encoder driver was initially submitted there was no aspect
ratio check.
Switch from drm_mode_equal() to drm_mode_match() without
DRM_MODE_MATCH_ASPECT_RATIO to fix "kmscube" and X.org output using the
CVBS connector. When (for example) kmscube sets the output mode when
using the CVBS connector it passes HDMI_PICTURE_ASPECT_NONE, making the
drm_mode_equal() fail as it include the aspect ratio.
Prior to this patch kmscube reported:
failed to set mode: Invalid argument
The CVBS mode checking in the sun4i (drivers/gpu/drm/sun4i/sun4i_tv.c
sun4i_tv_mode_to_drm_mode) and ZTE (drivers/gpu/drm/zte/zx_tvenc.c
tvenc_mode_{pal,ntsc}) drivers don't set the "picture_aspect_ratio" at
all. The Meson VPU driver does not rely on the aspect ratio for the CVBS
output so we can safely decouple it from the hdmi_picture_aspect
setting.
Cc: <stable@vger.kernel.org>
Fixes: 222ec1618c ("drm: Add aspect ratio parsing in DRM layer")
Fixes: bbbe775ec5 ("drm: Add support for Amlogic Meson Graphic Controller")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: squashed with drm: meson: venc: cvbs: deduplicate the meson_cvbs_mode lookup code]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191208171832.1064772-3-martin.blumenstingl@googlemail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4f69851fba upstream.
The "used" variables here come from the user in the ioctl and it can be
negative. It could result in an out of bounds write.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004102251.GC823@mwanda
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a64fc11b9a upstream.
If a process is interrupted while accessing the "gpu" debugfs file and
the drm device struct_mutex is contended, release() could return early
and fail to free related resources.
Note that the return value from release() is ignored.
Fixes: 4f776f4511 ("drm/msm/gpu: Convert the GPU show function to use the GPU state")
Cc: stable <stable@vger.kernel.org> # 4.18
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191010131333.23635-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2fc777ba84 ]
The number of syncpoints on Tegra186 is 576 and therefore no longer fits
into 8 bits. Increase the size of the syncpoint ID field to 10 in order
to accomodate all syncpoints.
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b8e7bbde5 ]
The datasheet of V3s (and various other chips) wrote
that TCON0_DCLK_DIV can be >= 1 if only dclk is used,
and must >= 6 if dclk1 or dclk2 is used. As currently
neither dclk1 nor dclk2 is used (no writes to these
bits), let's set minimal division to 1.
If this minimal division is 6, some common dot clock
frequencies can't be produced (e.g. 30MHz will not be
possible and will fallback to 25MHz), which is
obviously not an expected behaviour.
Signed-off-by: Yunhao Tian <t123yh@outlook.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/linux-arm-kernel/MN2PR08MB57905AD8A00C08DA219377C989760@MN2PR08MB5790.namprd08.prod.outlook.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit cbb3207914 upstream.
Revert shift by 8 of state->base.alpha. This introduced a
regression on planes.
Fixes: 7f73c10b25 ("drm/atmel-hclcdc: Convert to the new generic alpha property")
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1556195748-11106-7-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit eb0200a435 ]
On a NOP double buffer update where current buffer address is the same
as the next buffer address, the SDW_UPDATE bit clears too late. As we
are now using this bit to determine when it is safe to signal flip
completion to userspace this will delay completion of atomic commits
where one plane doesn't change the buffer by a whole frame period.
Fix this by remembering the last buffer address and just skip the
double buffer update if it would not change the buffer address.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
[p.zabel@pengutronix.de: initialize last_bufaddr in ipu_pre_configure]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2d691aeca4 upstream.
set_page_dirty says:
For pages with a mapping this should be done under the page lock
for the benefit of asynchronous memory errors who prefer a
consistent dirty state. This rule can be broken in some special
cases, but should be better not to.
Under those rules, it is only safe for us to use the plain set_page_dirty
calls for shmemfs/anonymous memory. Userptr may be used with real
mappings and so needs to use the locked version (set_page_dirty_lock).
However, following a try_to_unmap() we may want to remove the userptr and
so call put_pages(). However, try_to_unmap() acquires the page lock and
so we must avoid recursively locking the pages ourselves -- which means
that we cannot safely acquire the lock around set_page_dirty(). Since we
can't be sure of the lock, we have to risk skip dirtying the page, or
else risk calling set_page_dirty() without a lock and so risk fs
corruption.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203317
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112012
Fixes: 5cc9ed4b9a ("drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl")
References: cb6d7c7dc7 ("drm/i915/userptr: Acquire the page lock around set_page_dirty()")
References: 505a8ec7e1 ("Revert "drm/i915/userptr: Acquire the page lock around set_page_dirty()"")
References: 6dcc693bc5 ("ext4: warn when page is dirtied without buffers")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191111133205.11590-1-chris@chris-wilson.co.uk
(cherry picked from commit 0d4bbe3d40)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit cee7fb437e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit add3eeed36 upstream.
We report "frequencies" (actual-frequency, requested-frequency) as the
number of accumulated cycles so that the average frequency over that
period may be determined by the user. This means the units we report to
the user are Mcycles (or just M), not MHz.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191109105356.5273-1-chris@chris-wilson.co.uk
(cherry picked from commit e88866ef02)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit a7d87b70d6)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 32aa27e15c ]
The point of the 'force_dma' parameter for of_dma_configure
is to force the device to be set up even if DMA capability is
not described by the firmware which is exactly the use case
we have for GMU - we need SMMU to get set up but we have no
other dma capabilities since memory is managed by the GPU
driver. Currently we pass false so of_dma_configure() fails
and subsequently GMU and GPU probe does as well.
Fixes: 4b565ca5a2 ("drm/msm: Add A6XX device support")
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Tested-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7948a2b158 ]
"crtc->helper_private" is not initialized by the QXL driver and thus the
"crtc_funcs->disable" call would crash (resulting in suspend failure).
Fix this by converting the suspend/resume functions to use the
drm_mode_config_helper_* helpers.
Tested system sleep with QEMU 3.0 using "echo mem > /sys/power/state".
During suspend the following message is visible from QEMU:
spice/server/display-channel.c:2425:display_channel_validate_surface: canvas address is 0x7fd05da68308 for 0 (and is NULL)
spice/server/display-channel.c:2426:display_channel_validate_surface: failed on 0
This seems to be triggered by QXL_IO_NOTIFY_CMD after
QXL_IO_DESTROY_PRIMARY_ASYNC, but aside from the warning things still
seem to work (tested with both the GTK and -spice options).
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Link: http://patchwork.freedesktop.org/patch/msgid/20180904202747.14968-1-peter@lekensteyn.nl
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ea0b163b13 upstream.
When a jump_whitelist bitmap is reused, it needs to be cleared.
Currently this is done with memset() and the size calculation assumes
bitmaps are made of 32-bit words, not longs. So on 64-bit
architectures, only the first half of the bitmap is cleared.
If some whitelist bits are carried over between successive batches
submitted on the same context, this will presumably allow embedding
the rogue instructions that we're trying to reject.
Use bitmap_zero() instead, which gets the calculation right.
Fixes: f8c08d8fae ("drm/i915/cmdparser: Add support for backward jumps")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7e34f4e4aa upstream.
In some circumstances the RC6 context can get corrupted. We can detect
this and take the required action, that is disable RC6 and runtime PM.
The HW recovers from the corrupted state after a system suspend/resume
cycle, so detect the recovery and re-enable RC6 and runtime PM.
v2: rebase (Mika)
v3:
- Move intel_suspend_gt_powersave() to the end of the GEM suspend
sequence.
- Add commit message.
v4:
- Rebased on intel_uncore_forcewake_put(i915->uncore, ...) API
change.
v5: rebased on gem/gt split (Mika)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1d85a299c4 upstream.
In BXT/APL, device 2 MMIO reads from MIPI controller requires its PLL
to be turned ON. When MIPI PLL is turned off (MIPI Display is not
active or connected), and someone (host or GT engine) tries to read
MIPI registers, it causes hard hang. This is a hardware restriction
or limitation.
Driver by itself doesn't read MIPI registers when MIPI display is off.
But any userspace application can submit unprivileged batch buffer for
execution. In that batch buffer there can be mmio reads. And these
reads are allowed even for unprivileged applications. If these
register reads are for MIPI DSI controller and MIPI display is not
active during that time, then the MMIO read operation causes system
hard hang and only way to recover is hard reboot. A genuine
process/application won't submit batch buffer like this and doesn't
cause any issue. But on a compromised system, a malign userspace
process/app can generate such batch buffer and can trigger system
hard hang (denial of service attack).
The fix is to lower the internal MMIO timeout value to an optimum
value of 950us as recommended by hardware team. If the timeout is
beyond 1ms (which will hit for any value we choose if MMIO READ on a
DSI specific register is performed without PLL ON), it causes the
system hang. But if the timeout value is lower than it will be below
the threshold (even if timeout happens) and system will not get into
a hung state. This will avoid a system hang without losing any
programming or GT interrupts, taking the worst case of lowest CDCLK
frequency and early DC5 abort into account.
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 926abff21a upstream.
Some of the gen instruction macros (e.g. MI_DISPLAY_FLIP) have the
length directly encoded in them. Since these are used directly in
the tables, the Length becomes part of the comparison used for
matching during parsing. Thus, if the cmd being parsed has a
different length to that in the table, it is not matched and the
cmd is accepted via the default variable length path.
Fix by masking out everything except the Opcode in the cmd tables
Cc: Tony Luck <tony.luck@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com>
Reviewed-by: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f8c08d8fae upstream.
To keep things manageable, the pre-gen9 cmdparser does not
attempt to track any form of nested BB_START's. This did not
prevent usermode from using nested starts, or even chained
batches because the cmdparser is not strictly enforced pre gen9.
Instead, the existence of a nested BB_START would cause the batch
to be emitted in insecure mode, and any privileged capabilities
would not be available.
For Gen9, the cmdparser becomes mandatory (for BCS at least), and
so not providing any form of nested BB_START support becomes
overly restrictive. Any such batch will simply not run.
We make heavy use of backward jumps in igt, and it is much easier
to add support for this restricted subset of nested jumps, than to
rewrite the whole of our test suite to avoid them.
Add the required logic to support limited backward jumps, to
instructions that have already been validated by the parser.
Note that it's not sufficient to simply approve any BB_START
that jumps backwards in the buffer because this would allow an
attacker to embed a rogue instruction sequence within the
operand words of a harmless instruction (say LRI) and jump to
that.
We introduce a bit array to track every instr offset successfully
validated, and test the target of BB_START against this. If the
target offset hits, it is re-written to the same offset in the
shadow buffer and the BB_START cmd is allowed.
Note: This patch deliberately ignores checkpatch issues in the
cmdtables, in order to match the style of the surrounding code.
We'll correct the entire file in one go in a later patch.
v2: set dispatch secure late (Mika)
v3: rebase (Mika)
v4: Clear whitelist on each parse
Minor review updates (Chris)
v5: Correct backward jump batching
v6: fix compilation error due to struct eb shuffle (Mika)
Cc: Tony Luck <tony.luck@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0546a29cd8 upstream.
In the next patch we will be adding a second valid
termination condition which will require a small
amount of refactoring to share logic with the BB_END
case.
Refactor all error conditions to jump to a dedicated
exit path, with 'break' reserved only for a successful
parse.
Cc: Tony Luck <tony.luck@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com>
Reviewed-by: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0f2f397583 upstream.
For gen9 we enable cmdparsing on the BCS ring, specifically
to catch inadvertent accesses to sensitive registers
Unlike gen7/hsw, we use the parser only to block certain
registers. We can rely on h/w to block restricted commands,
so the command tables only provide enough info to allow the
parser to delineate each command, and identify commands that
access registers.
Note: This patch deliberately ignores checkpatch issues in
favour of matching the style of the surrounding code. We'll
correct the entire file in one go in a later patch.
Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 435e8fc059 upstream.
In "drm/i915: Add support for mandatory cmdparsing" we introduced the
concept of mandatory parsing. This allows the cmdparser to be invoked
even when user passes batch_len=0 to the execbuf ioctl's.
However, the cmdparser needs to know the extents of the buffer being
scanned. Refactor the code to ensure the cmdparser uses the actual
object size, instead of the incoming length, if user passes 0.
Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Reviewed-by: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4f7af1948a upstream.
For Gen7, the original cmdparser motive was to permit limited
use of register read/write instructions in unprivileged BB's.
This worked by copying the user supplied bb to a kmd owned
bb, and running it in secure mode, from the ggtt, only if
the scanner finds no unsafe commands or registers.
For Gen8+ we can't use this same technique because running bb's
from the ggtt also disables access to ppgtt space. But we also
do not actually require 'secure' execution since we are only
trying to reduce the available command/register set. Instead we
will copy the user buffer to a kmd owned read-only bb in ppgtt,
and run in the usual non-secure mode.
Note that ro pages are only supported by ppgtt (not ggtt), but
luckily that's exactly what we need.
Add the required paths to map the shadow buffer to ppgtt ro for Gen8+
v2: IS_GEN7/IS_GEN (Mika)
v3: rebase
v4: rebase
v5: rebase
Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 311a50e76a upstream.
The existing cmdparser for gen7 can be bypassed by specifying
batch_len=0 in the execbuf call. This is safe because bypassing
simply reduces the cmd-set available.
In a later patch we will introduce cmdparsing for gen9, as a
security measure, which must be strictly enforced since without
it we are vulnerable to DoS attacks.
Introduce the concept of 'required' cmd parsing that cannot be
bypassed by submitting zero-length bb's.
v2: rebase (Mika)
v2: rebase (Mika)
v3: fix conflict on engine flags (Mika)
Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
