This reverts commit e5366bea02 as it
breaks the kernel abi at the moment. It will be restored at a later
point in time.
Bug: 161946584
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I1a91bb1044c7006c9fa9f49639ac364af1c7510f
Changes in 5.10.38
KEYS: trusted: Fix memory leak on object td
tpm: fix error return code in tpm2_get_cc_attrs_tbl()
tpm, tpm_tis: Extend locality handling to TPM2 in tpm_tis_gen_interrupt()
tpm, tpm_tis: Reserve locality in tpm_tis_resume()
KVM: x86/mmu: Remove the defunct update_pte() paging hook
KVM/VMX: Invoke NMI non-IST entry instead of IST entry
ACPI: PM: Add ACPI ID of Alder Lake Fan
PM: runtime: Fix unpaired parent child_count for force_resume
cpufreq: intel_pstate: Use HWP if enabled by platform firmware
kvm: Cap halt polling at kvm->max_halt_poll_ns
ath11k: fix thermal temperature read
fs: dlm: fix debugfs dump
fs: dlm: add errno handling to check callback
fs: dlm: check on minimum msglen size
fs: dlm: flush swork on shutdown
tipc: convert dest node's address to network order
ASoC: Intel: bytcr_rt5640: Enable jack-detect support on Asus T100TAF
net/mlx5e: Use net_prefetchw instead of prefetchw in MPWQE TX datapath
net: stmmac: Set FIFO sizes for ipq806x
ASoC: rsnd: core: Check convert rate in rsnd_hw_params
Bluetooth: Fix incorrect status handling in LE PHY UPDATE event
i2c: bail out early when RDWR parameters are wrong
ALSA: hdsp: don't disable if not enabled
ALSA: hdspm: don't disable if not enabled
ALSA: rme9652: don't disable if not enabled
ALSA: bebob: enable to deliver MIDI messages for multiple ports
Bluetooth: Set CONF_NOT_COMPLETE as l2cap_chan default
Bluetooth: initialize skb_queue_head at l2cap_chan_create()
net/sched: cls_flower: use ntohs for struct flow_dissector_key_ports
net: bridge: when suppression is enabled exclude RARP packets
Bluetooth: check for zapped sk before connecting
selftests/powerpc: Fix L1D flushing tests for Power10
powerpc/32: Statically initialise first emergency context
net: hns3: remediate a potential overflow risk of bd_num_list
net: hns3: add handling for xmit skb with recursive fraglist
ip6_vti: proper dev_{hold|put} in ndo_[un]init methods
ASoC: Intel: bytcr_rt5640: Add quirk for the Chuwi Hi8 tablet
ice: handle increasing Tx or Rx ring sizes
Bluetooth: btusb: Enable quirk boolean flag for Mediatek Chip.
ASoC: rt5670: Add a quirk for the Dell Venue 10 Pro 5055
i2c: Add I2C_AQ_NO_REP_START adapter quirk
MIPS: Loongson64: Use _CACHE_UNCACHED instead of _CACHE_UNCACHED_ACCELERATED
coresight: Do not scan for graph if none is present
IB/hfi1: Correct oversized ring allocation
mac80211: clear the beacon's CRC after channel switch
pinctrl: samsung: use 'int' for register masks in Exynos
rtw88: 8822c: add LC calibration for RTL8822C
mt76: mt7615: support loading EEPROM for MT7613BE
mt76: mt76x0: disable GTK offloading
mt76: mt7915: fix txpower init for TSSI off chips
fuse: invalidate attrs when page writeback completes
virtiofs: fix userns
cuse: prevent clone
iwlwifi: pcie: make cfg vs. trans_cfg more robust
powerpc/mm: Add cond_resched() while removing hpte mappings
ASoC: rsnd: call rsnd_ssi_master_clk_start() from rsnd_ssi_init()
Revert "iommu/amd: Fix performance counter initialization"
iommu/amd: Remove performance counter pre-initialization test
drm/amd/display: Force vsync flip when reconfiguring MPCC
selftests: Set CC to clang in lib.mk if LLVM is set
kconfig: nconf: stop endless search loops
ALSA: hda/realtek: Add quirk for Lenovo Ideapad S740
ASoC: Intel: sof_sdw: add quirk for new ADL-P Rvp
ALSA: hda/hdmi: fix race in handling acomp ELD notification at resume
sctp: Fix out-of-bounds warning in sctp_process_asconf_param()
flow_dissector: Fix out-of-bounds warning in __skb_flow_bpf_to_target()
powerpc/smp: Set numa node before updating mask
ASoC: rt286: Generalize support for ALC3263 codec
ethtool: ioctl: Fix out-of-bounds warning in store_link_ksettings_for_user()
net: sched: tapr: prevent cycle_time == 0 in parse_taprio_schedule
samples/bpf: Fix broken tracex1 due to kprobe argument change
powerpc/pseries: Stop calling printk in rtas_stop_self()
drm/amd/display: fixed divide by zero kernel crash during dsc enablement
drm/amd/display: add handling for hdcp2 rx id list validation
drm/amdgpu: Add mem sync flag for IB allocated by SA
mt76: mt7615: fix entering driver-own state on mt7663
crypto: ccp: Free SEV device if SEV init fails
wl3501_cs: Fix out-of-bounds warnings in wl3501_send_pkt
wl3501_cs: Fix out-of-bounds warnings in wl3501_mgmt_join
qtnfmac: Fix possible buffer overflow in qtnf_event_handle_external_auth
powerpc/iommu: Annotate nested lock for lockdep
iavf: remove duplicate free resources calls
net: ethernet: mtk_eth_soc: fix RX VLAN offload
selftests: mlxsw: Increase the tolerance of backlog buildup
selftests: mlxsw: Fix mausezahn invocation in ERSPAN scale test
kbuild: generate Module.symvers only when vmlinux exists
bnxt_en: Add PCI IDs for Hyper-V VF devices.
ia64: module: fix symbolizer crash on fdescr
watchdog: rename __touch_watchdog() to a better descriptive name
watchdog: explicitly update timestamp when reporting softlockup
watchdog/softlockup: remove logic that tried to prevent repeated reports
watchdog: fix barriers when printing backtraces from all CPUs
ASoC: rt286: Make RT286_SET_GPIO_* readable and writable
thermal: thermal_of: Fix error return code of thermal_of_populate_bind_params()
f2fs: move ioctl interface definitions to separated file
f2fs: fix compat F2FS_IOC_{MOVE,GARBAGE_COLLECT}_RANGE
f2fs: fix to allow migrating fully valid segment
f2fs: fix panic during f2fs_resize_fs()
f2fs: fix a redundant call to f2fs_balance_fs if an error occurs
remoteproc: qcom_q6v5_mss: Replace ioremap with memremap
remoteproc: qcom_q6v5_mss: Validate p_filesz in ELF loader
PCI: iproc: Fix return value of iproc_msi_irq_domain_alloc()
PCI: Release OF node in pci_scan_device()'s error path
ARM: 9064/1: hw_breakpoint: Do not directly check the event's overflow_handler hook
f2fs: fix to align to section for fallocate() on pinned file
f2fs: fix to update last i_size if fallocate partially succeeds
PCI: endpoint: Make *_get_first_free_bar() take into account 64 bit BAR
PCI: endpoint: Add helper API to get the 'next' unreserved BAR
PCI: endpoint: Make *_free_bar() to return error codes on failure
PCI: endpoint: Fix NULL pointer dereference for ->get_features()
f2fs: fix to avoid touching checkpointed data in get_victim()
f2fs: fix to cover __allocate_new_section() with curseg_lock
f2fs: Fix a hungtask problem in atomic write
f2fs: fix to avoid accessing invalid fio in f2fs_allocate_data_block()
rpmsg: qcom_glink_native: fix error return code of qcom_glink_rx_data()
NFS: nfs4_bitmask_adjust() must not change the server global bitmasks
NFS: Fix attribute bitmask in _nfs42_proc_fallocate()
NFSv4.2: Always flush out writes in nfs42_proc_fallocate()
NFS: Deal correctly with attribute generation counter overflow
PCI: endpoint: Fix missing destroy_workqueue()
pNFS/flexfiles: fix incorrect size check in decode_nfs_fh()
NFSv4.2 fix handling of sr_eof in SEEK's reply
SUNRPC: Move fault injection call sites
SUNRPC: Remove trace_xprt_transmit_queued
SUNRPC: Handle major timeout in xprt_adjust_timeout()
thermal/drivers/tsens: Fix missing put_device error
NFSv4.x: Don't return NFS4ERR_NOMATCHING_LAYOUT if we're unmounting
nfsd: ensure new clients break delegations
rtc: fsl-ftm-alarm: add MODULE_TABLE()
dmaengine: idxd: Fix potential null dereference on pointer status
dmaengine: idxd: fix dma device lifetime
dmaengine: idxd: fix cdev setup and free device lifetime issues
SUNRPC: fix ternary sign expansion bug in tracing
pwm: atmel: Fix duty cycle calculation in .get_state()
xprtrdma: Avoid Receive Queue wrapping
xprtrdma: Fix cwnd update ordering
xprtrdma: rpcrdma_mr_pop() already does list_del_init()
swiotlb: Fix the type of index
ceph: fix inode leak on getattr error in __fh_to_dentry
scsi: qla2xxx: Prevent PRLI in target mode
scsi: ufs: core: Do not put UFS power into LPM if link is broken
scsi: ufs: core: Cancel rpm_dev_flush_recheck_work during system suspend
scsi: ufs: core: Narrow down fast path in system suspend path
rtc: ds1307: Fix wday settings for rx8130
net: hns3: fix incorrect configuration for igu_egu_hw_err
net: hns3: initialize the message content in hclge_get_link_mode()
net: hns3: add check for HNS3_NIC_STATE_INITED in hns3_reset_notify_up_enet()
net: hns3: fix for vxlan gpe tx checksum bug
net: hns3: use netif_tx_disable to stop the transmit queue
net: hns3: disable phy loopback setting in hclge_mac_start_phy
sctp: do asoc update earlier in sctp_sf_do_dupcook_a
RISC-V: Fix error code returned by riscv_hartid_to_cpuid()
sunrpc: Fix misplaced barrier in call_decode
libbpf: Fix signed overflow in ringbuf_process_ring
block/rnbd-clt: Change queue_depth type in rnbd_clt_session to size_t
block/rnbd-clt: Check the return value of the function rtrs_clt_query
ethernet:enic: Fix a use after free bug in enic_hard_start_xmit
sctp: fix a SCTP_MIB_CURRESTAB leak in sctp_sf_do_dupcook_b
netfilter: xt_SECMARK: add new revision to fix structure layout
xsk: Fix for xp_aligned_validate_desc() when len == chunk_size
net: stmmac: Clear receive all(RA) bit when promiscuous mode is off
drm/radeon: Fix off-by-one power_state index heap overwrite
drm/radeon: Avoid power table parsing memory leaks
arm64: entry: factor irq triage logic into macros
arm64: entry: always set GIC_PRIO_PSR_I_SET during entry
khugepaged: fix wrong result value for trace_mm_collapse_huge_page_isolate()
mm/hugeltb: handle the error case in hugetlb_fix_reserve_counts()
mm/migrate.c: fix potential indeterminate pte entry in migrate_vma_insert_page()
ksm: fix potential missing rmap_item for stable_node
mm/gup: check every subpage of a compound page during isolation
mm/gup: return an error on migration failure
mm/gup: check for isolation errors
ethtool: fix missing NLM_F_MULTI flag when dumping
net: fix nla_strcmp to handle more then one trailing null character
smc: disallow TCP_ULP in smc_setsockopt()
netfilter: nfnetlink_osf: Fix a missing skb_header_pointer() NULL check
netfilter: nftables: Fix a memleak from userdata error path in new objects
can: mcp251xfd: mcp251xfd_probe(): add missing can_rx_offload_del() in error path
can: mcp251x: fix resume from sleep before interface was brought up
can: m_can: m_can_tx_work_queue(): fix tx_skb race condition
sched: Fix out-of-bound access in uclamp
sched/fair: Fix unfairness caused by missing load decay
fs/proc/generic.c: fix incorrect pde_is_permanent check
kernel: kexec_file: fix error return code of kexec_calculate_store_digests()
kernel/resource: make walk_system_ram_res() find all busy IORESOURCE_SYSTEM_RAM resources
kernel/resource: make walk_mem_res() find all busy IORESOURCE_MEM resources
netfilter: nftables: avoid overflows in nft_hash_buckets()
i40e: fix broken XDP support
i40e: Fix use-after-free in i40e_client_subtask()
i40e: fix the restart auto-negotiation after FEC modified
i40e: Fix PHY type identifiers for 2.5G and 5G adapters
mptcp: fix splat when closing unaccepted socket
f2fs: avoid unneeded data copy in f2fs_ioc_move_range()
ARC: entry: fix off-by-one error in syscall number validation
ARC: mm: PAE: use 40-bit physical page mask
ARC: mm: Use max_high_pfn as a HIGHMEM zone border
powerpc/64s: Fix crashes when toggling stf barrier
powerpc/64s: Fix crashes when toggling entry flush barrier
hfsplus: prevent corruption in shrinking truncate
squashfs: fix divide error in calculate_skip()
userfaultfd: release page in error path to avoid BUG_ON
kasan: fix unit tests with CONFIG_UBSAN_LOCAL_BOUNDS enabled
mm/hugetlb: fix F_SEAL_FUTURE_WRITE
blk-iocost: fix weight updates of inner active iocgs
arm64: mte: initialize RGSR_EL1.SEED in __cpu_setup
arm64: Fix race condition on PG_dcache_clean in __sync_icache_dcache()
btrfs: fix race leading to unpersisted data and metadata on fsync
drm/radeon/dpm: Disable sclk switching on Oland when two 4K 60Hz monitors are connected
drm/amd/display: Initialize attribute for hdcp_srm sysfs file
drm/i915: Avoid div-by-zero on gen2
kvm: exit halt polling on need_resched() as well
KVM: LAPIC: Accurately guarantee busy wait for timer to expire when using hv_timer
drm/msm/dp: initialize audio_comp when audio starts
KVM: x86: Cancel pvclock_gtod_work on module removal
KVM: x86: Prevent deadlock against tk_core.seq
dax: Add an enum for specifying dax wakup mode
dax: Add a wakeup mode parameter to put_unlocked_entry()
dax: Wake up all waiters after invalidating dax entry
xen/unpopulated-alloc: consolidate pgmap manipulation
xen/unpopulated-alloc: fix error return code in fill_list()
perf tools: Fix dynamic libbpf link
usb: dwc3: gadget: Free gadget structure only after freeing endpoints
iio: light: gp2ap002: Fix rumtime PM imbalance on error
iio: proximity: pulsedlight: Fix rumtime PM imbalance on error
iio: hid-sensors: select IIO_TRIGGERED_BUFFER under HID_SENSOR_IIO_TRIGGER
usb: fotg210-hcd: Fix an error message
hwmon: (occ) Fix poll rate limiting
usb: musb: Fix an error message
ACPI: scan: Fix a memory leak in an error handling path
kyber: fix out of bounds access when preempted
nvmet: add lba to sect conversion helpers
nvmet: fix inline bio check for bdev-ns
nvmet-rdma: Fix NULL deref when SEND is completed with error
f2fs: compress: fix to free compress page correctly
f2fs: compress: fix race condition of overwrite vs truncate
f2fs: compress: fix to assign cc.cluster_idx correctly
nbd: Fix NULL pointer in flush_workqueue
blk-mq: plug request for shared sbitmap
blk-mq: Swap two calls in blk_mq_exit_queue()
usb: dwc3: omap: improve extcon initialization
usb: dwc3: pci: Enable usb2-gadget-lpm-disable for Intel Merrifield
usb: xhci: Increase timeout for HC halt
usb: dwc2: Fix gadget DMA unmap direction
usb: core: hub: fix race condition about TRSMRCY of resume
usb: dwc3: gadget: Enable suspend events
usb: dwc3: gadget: Return success always for kick transfer in ep queue
usb: typec: ucsi: Retrieve all the PDOs instead of just the first 4
usb: typec: ucsi: Put fwnode in any case during ->probe()
xhci-pci: Allow host runtime PM as default for Intel Alder Lake xHCI
xhci: Do not use GFP_KERNEL in (potentially) atomic context
xhci: Add reset resume quirk for AMD xhci controller.
iio: gyro: mpu3050: Fix reported temperature value
iio: tsl2583: Fix division by a zero lux_val
cdc-wdm: untangle a circular dependency between callback and softint
xen/gntdev: fix gntdev_mmap() error exit path
KVM: x86: Emulate RDPID only if RDTSCP is supported
KVM: x86: Move RDPID emulation intercept to its own enum
KVM: nVMX: Always make an attempt to map eVMCS after migration
KVM: VMX: Do not advertise RDPID if ENABLE_RDTSCP control is unsupported
KVM: VMX: Disable preemption when probing user return MSRs
Revert "iommu/vt-d: Remove WO permissions on second-level paging entries"
Revert "iommu/vt-d: Preset Access/Dirty bits for IOVA over FL"
iommu/vt-d: Preset Access/Dirty bits for IOVA over FL
iommu/vt-d: Remove WO permissions on second-level paging entries
mm: fix struct page layout on 32-bit systems
MIPS: Reinstate platform `__div64_32' handler
MIPS: Avoid DIVU in `__div64_32' is result would be zero
MIPS: Avoid handcoded DIVU in `__div64_32' altogether
clocksource/drivers/timer-ti-dm: Prepare to handle dra7 timer wrap issue
clocksource/drivers/timer-ti-dm: Handle dra7 timer wrap errata i940
ARM: 9011/1: centralize phys-to-virt conversion of DT/ATAGS address
ARM: 9012/1: move device tree mapping out of linear region
ARM: 9020/1: mm: use correct section size macro to describe the FDT virtual address
ARM: 9027/1: head.S: explicitly map DT even if it lives in the first physical section
usb: typec: tcpm: Fix error while calculating PPS out values
kobject_uevent: remove warning in init_uevent_argv()
drm/i915/gt: Fix a double free in gen8_preallocate_top_level_pdp
drm/i915: Read C0DRB3/C1DRB3 as 16 bits again
drm/i915/overlay: Fix active retire callback alignment
drm/i915: Fix crash in auto_retire
clk: exynos7: Mark aclk_fsys1_200 as critical
media: rkvdec: Remove of_match_ptr()
i2c: mediatek: Fix send master code at more than 1MHz
dt-bindings: media: renesas,vin: Make resets optional on R-Car Gen1
dt-bindings: serial: 8250: Remove duplicated compatible strings
debugfs: Make debugfs_allow RO after init
ext4: fix debug format string warning
nvme: do not try to reconfigure APST when the controller is not live
ASoC: rsnd: check all BUSIF status when error
Linux 5.10.38
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ia32e01283b488a38be48015c58a0e481f09aaf65
commit 374157ff88 upstream.
"usb: typec: tcpm: Address incorrect values of tcpm psy for pps supply"
introduced a regression for req_out_volt and req_op_curr calculation.
req_out_volt should consider the newly calculated max voltage instead
of previously accepted max voltage by the port partner. Likewise,
req_op_curr should consider the newly calculated max current instead
of previously accepted max current by the port partner.
Fixes: e3a0720224 ("usb: typec: tcpm: Address incorrect values of tcpm psy for pps supply")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20210415050121.1928298-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 18abf87436 upstream.
We have a cycle of callbacks scheduling works which submit
URBs with those callbacks. This needs to be blocked, stopped
and unblocked to untangle the circle.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20210426092622.20433-1-oneukum@suse.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3c128781d8 upstream.
One of AMD xhci controller require reset on resume.
Occasionally AMD xhci controller does not respond to
Stop endpoint command.
Once the issue happens controller goes into bad state
and in that case controller needs to be reset.
Cc: <stable@vger.kernel.org>
Signed-off-by: Sandeep Singh <sandeep.singh@amd.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210512080816.866037-6-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dda32c00c9 upstream.
'xhci_urb_enqueue()' is passed a 'mem_flags' argument, because "URBs may be
submitted in interrupt context" (see comment related to 'usb_submit_urb()'
in 'drivers/usb/core/urb.c')
So this flag should be used in all the calling chain.
Up to now, 'xhci_check_maxpacket()' which is only called from
'xhci_urb_enqueue()', uses GFP_KERNEL.
Be safe and pass the mem_flags to this function as well.
Fixes: ddba5cd0ae ("xhci: Use command structures when queuing commands on the command ring")
Cc: <stable@vger.kernel.org>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210512080816.866037-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b813511135 upstream.
In the same way as Intel Tiger Lake TCSS (Type-C Subsystem) the Alder Lake
TCSS xHCI needs to be runtime suspended whenever possible to allow the
TCSS hardware block to enter D3cold and thus save energy.
Cc: stable@vger.kernel.org
Signed-off-by: Abhijeet Rao <abhijeet.rao@intel.com>
Signed-off-by: Nikunj A. Dadhania <nikunj.dadhania@intel.com>
Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210512080816.866037-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b9a0866a5b upstream.
device_for_each_child_node() bumps a reference counting of a returned variable.
We have to balance it whenever we return to the caller.
Fixes: c1b0bc2dab ("usb: typec: Add support for UCSI interface")
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210504222337.3151726-1-andy.shevchenko@gmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1f4642b72b upstream.
commit 4dbc6a4ef0 ("usb: typec: ucsi: save power data objects
in PD mode") introduced retrieval of the PDOs when connected to a
PD-capable source. But only the first 4 PDOs are received since
that is the maximum number that can be fetched at a time given the
MESSAGE_IN length limitation (16 bytes). However, as per the PD spec
a connected source may advertise up to a maximum of 7 PDOs.
If such a source is connected it's possible the PPM could have
negotiated a power contract with one of the PDOs at index greater
than 4, and would be reflected in the request data object's (RDO)
object position field. This would result in an out-of-bounds access
when the rdo_index() is used to index into the src_pdos array in
ucsi_psy_get_voltage_now().
With the help of the UBSAN -fsanitize=array-bounds checker enabled
this exact issue is revealed when connecting to a PD source adapter
that advertise 5 PDOs and the PPM enters a contract having selected
the 5th one.
[ 151.545106][ T70] Unexpected kernel BRK exception at EL1
[ 151.545112][ T70] Internal error: BRK handler: f2005512 [#1] PREEMPT SMP
...
[ 151.545499][ T70] pc : ucsi_psy_get_prop+0x208/0x20c
[ 151.545507][ T70] lr : power_supply_show_property+0xc0/0x328
...
[ 151.545542][ T70] Call trace:
[ 151.545544][ T70] ucsi_psy_get_prop+0x208/0x20c
[ 151.545546][ T70] power_supply_uevent+0x1a4/0x2f0
[ 151.545550][ T70] dev_uevent+0x200/0x384
[ 151.545555][ T70] kobject_uevent_env+0x1d4/0x7e8
[ 151.545557][ T70] power_supply_changed_work+0x174/0x31c
[ 151.545562][ T70] process_one_work+0x244/0x6f0
[ 151.545564][ T70] worker_thread+0x3e0/0xa64
We can resolve this by instead retrieving and storing up to the
maximum of 7 PDOs in the con->src_pdos array. This would involve
two calls to the GET_PDOS command.
Fixes: 992a60ed0d ("usb: typec: ucsi: register with power_supply class")
Fixes: 4dbc6a4ef0 ("usb: typec: ucsi: save power data objects in PD mode")
Cc: stable@vger.kernel.org
Reported-and-tested-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Link: https://lore.kernel.org/r/20210503074611.30973-1-jackp@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 18ffa988db upstream.
If an error is received when issuing a start or update transfer
command, the error handler will stop all active requests (including
the current USB request), and call dwc3_gadget_giveback() to notify
function drivers of the requests which have been stopped. Avoid
returning an error for kick transfer during EP queue, to remove
duplicate cleanup operations on the request being queued.
Fixes: 8d99087c2d ("usb: dwc3: gadget: Properly handle failed kick_transfer")
cc: stable@vger.kernel.org
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Link: https://lore.kernel.org/r/1620410119-24971-1-git-send-email-wcheng@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d1d90dd272 upstream.
commit 72704f876f ("dwc3: gadget: Implement the suspend entry event
handler") introduced (nearly 5 years ago!) an interrupt handler for
U3/L1-L2 suspend events. The problem is that these events aren't
currently enabled in the DEVTEN register so the handler is never
even invoked. Fix this simply by enabling the corresponding bit
in dwc3_gadget_enable_irq() using the same revision check as found
in the handler.
Fixes: 72704f876f ("dwc3: gadget: Implement the suspend entry event handler")
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428090111.3370-1-jackp@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 975f94c7d6 upstream.
This may happen if the port becomes resume status exactly
when usb_port_resume() gets port status, it still need provide
a TRSMCRY time before access the device.
CC: <stable@vger.kernel.org>
Reported-by: Tianping Fang <tianping.fang@mediatek.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20210512020738.52961-1-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 75a41ce46b upstream.
The dwc2 gadget support maps and unmaps DMA buffers as necessary. When
mapping and unmapping it uses the direction of the endpoint to select
the direction of the DMA transfer, but this fails for Control OUT
transfers because the unmap occurs after the endpoint direction has
been reversed for the status phase.
A possible solution would be to unmap the buffer before the direction
is changed, but a safer, less invasive fix is to remember the buffer
direction independently of the endpoint direction.
Fixes: fe0b94abcd ("usb: dwc2: gadget: manage ep0 state in software")
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Link: https://lore.kernel.org/r/20210506112200.2893922-1-phil@raspberrypi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ca09b1bea6 upstream.
On some devices (specifically the SC8180x based Surface Pro X with
QCOM04A6) HC halt / xhci_halt() times out during boot. Manually binding
the xhci-hcd driver at some point later does not exhibit this behavior.
To work around this, double XHCI_MAX_HALT_USEC, which also resolves this
issue.
Cc: <stable@vger.kernel.org>
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210512080816.866037-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 04357fafea upstream.
On Intel Merrifield LPM is causing host to reset port after a timeout.
By disabling LPM entirely this is prevented.
Fixes: 066c095934 ("usb: dwc3: pci: Enable extcon driver for Intel Merrifield")
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Ferry Toth <ftoth@exalondelft.nl>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210425150947.5862-1-ftoth@exalondelft.nl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e17b02d497 upstream.
When extcon is used in combination with dwc3, it is assumed that the dwc3
registers are untouched and as such are only configured if VBUS is valid
or ID is tied to ground.
In case VBUS is not valid or ID is floating, the registers are not
configured as such during driver initialization, causing a wrong
default state during boot.
If the registers are not in a default state, because they are for
instance touched by a boot loader, this can cause for a kernel error.
Signed-off-by: Marcel Hamer <marcel@solidxs.se>
Link: https://lore.kernel.org/r/20210427122118.1948340-1-marcel@solidxs.se
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a60a34366e ]
'retval' is known to be -ENODEV here.
This is a hard-coded default error code which is not useful in the error
message. Moreover, another error message is printed at the end of the
error handling path. The corresponding error code (-ENOMEM) is more
informative.
So remove simplify the first error message.
While at it, also remove the useless initialization of 'retval'.
Fixes: 7d50195f6c ("usb: host: Faraday fotg210-hcd driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/94531bcff98e46d4f9c20183a90b7f47f699126c.1620333419.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb9c74a5bd ]
As part of commit e81a7018d9 ("usb: dwc3: allocate gadget structure
dynamically") the dwc3_gadget_release() was added which will free
the dwc->gadget structure upon the device's removal when
usb_del_gadget_udc() is called in dwc3_gadget_exit().
However, simply freeing the gadget results a dangling pointer
situation: the endpoints created in dwc3_gadget_init_endpoints()
have their dep->endpoint.ep_list members chained off the list_head
anchored at dwc->gadget->ep_list. Thus when dwc->gadget is freed,
the first dwc3_ep in the list now has a dangling prev pointer and
likewise for the next pointer of the dwc3_ep at the tail of the list.
The dwc3_gadget_free_endpoints() that follows will result in a
use-after-free when it calls list_del().
This was caught by enabling KASAN and performing a driver unbind.
The recent commit 568262bf54 ("usb: dwc3: core: Add shutdown
callback for dwc3") also exposes this as a panic during shutdown.
There are a few possibilities to fix this. One could be to perform
a list_del() of the gadget->ep_list itself which removes it from
the rest of the dwc3_ep chain.
Another approach is what this patch does, by splitting up the
usb_del_gadget_udc() call into its separate "del" and "put"
components. This allows dwc3_gadget_free_endpoints() to be
called before the gadget is finally freed with usb_put_gadget().
Fixes: e81a7018d9 ("usb: dwc3: allocate gadget structure dynamically")
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Link: https://lore.kernel.org/r/20210501093558.7375-1-jackp@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This reverts commit 92de566762.
This commit is not needed since userspace will handle corresponding
behavior if the device received ClearFeature(halt_ep) request.
Bug: 178904115
Signed-off-by: Ray Chi <raychi@google.com>
Change-Id: I94d40af0b25f7f582cd67ac509c6498355a6ba8a
Changes in 5.10.37
Bluetooth: verify AMP hci_chan before amp_destroy
bluetooth: eliminate the potential race condition when removing the HCI controller
net/nfc: fix use-after-free llcp_sock_bind/connect
io_uring: truncate lengths larger than MAX_RW_COUNT on provide buffers
Revert "USB: cdc-acm: fix rounding error in TIOCSSERIAL"
usb: roles: Call try_module_get() from usb_role_switch_find_by_fwnode()
tty: moxa: fix TIOCSSERIAL jiffies conversions
tty: amiserial: fix TIOCSSERIAL permission check
USB: serial: usb_wwan: fix TIOCSSERIAL jiffies conversions
staging: greybus: uart: fix TIOCSSERIAL jiffies conversions
USB: serial: ti_usb_3410_5052: fix TIOCSSERIAL permission check
staging: fwserial: fix TIOCSSERIAL jiffies conversions
tty: moxa: fix TIOCSSERIAL permission check
staging: fwserial: fix TIOCSSERIAL permission check
drm: bridge: fix LONTIUM use of mipi_dsi_() functions
usb: typec: tcpm: Address incorrect values of tcpm psy for fixed supply
usb: typec: tcpm: Address incorrect values of tcpm psy for pps supply
usb: typec: tcpm: update power supply once partner accepts
usb: xhci-mtk: remove or operator for setting schedule parameters
usb: xhci-mtk: improve bandwidth scheduling with TT
ASoC: samsung: tm2_wm5110: check of of_parse return value
ASoC: Intel: kbl_da7219_max98927: Fix kabylake_ssp_fixup function
ASoC: tlv320aic32x4: Register clocks before registering component
ASoC: tlv320aic32x4: Increase maximum register in regmap
MIPS: pci-mt7620: fix PLL lock check
MIPS: pci-rt2880: fix slot 0 configuration
FDDI: defxx: Bail out gracefully with unassigned PCI resource for CSR
PCI: Allow VPD access for QLogic ISP2722
KVM: x86: Defer the MMU unload to the normal path on an global INVPCID
PCI: xgene: Fix cfg resource mapping
PCI: keystone: Let AM65 use the pci_ops defined in pcie-designware-host.c
PM / devfreq: Unlock mutex and free devfreq struct in error path
soc/tegra: regulators: Fix locking up when voltage-spread is out of range
iio: inv_mpu6050: Fully validate gyro and accel scale writes
iio:accel:adis16201: Fix wrong axis assignment that prevents loading
iio:adc:ad7476: Fix remove handling
sc16is7xx: Defer probe if device read fails
phy: cadence: Sierra: Fix PHY power_on sequence
misc: lis3lv02d: Fix false-positive WARN on various HP models
phy: ti: j721e-wiz: Invoke wiz_init() before of_platform_device_create()
misc: vmw_vmci: explicitly initialize vmci_notify_bm_set_msg struct
misc: vmw_vmci: explicitly initialize vmci_datagram payload
selinux: add proper NULL termination to the secclass_map permissions
x86, sched: Treat Intel SNC topology as default, COD as exception
async_xor: increase src_offs when dropping destination page
md/bitmap: wait for external bitmap writes to complete during tear down
md-cluster: fix use-after-free issue when removing rdev
md: split mddev_find
md: factor out a mddev_find_locked helper from mddev_find
md: md_open returns -EBUSY when entering racing area
md: Fix missing unused status line of /proc/mdstat
mt76: mt7615: use ieee80211_free_txskb() in mt7615_tx_token_put()
ipw2x00: potential buffer overflow in libipw_wx_set_encodeext()
cfg80211: scan: drop entry from hidden_list on overflow
rtw88: Fix array overrun in rtw_get_tx_power_params()
mt76: fix potential DMA mapping leak
FDDI: defxx: Make MMIO the configuration default except for EISA
drm/i915/gvt: Fix virtual display setup for BXT/APL
drm/i915/gvt: Fix vfio_edid issue for BXT/APL
drm/qxl: use ttm bo priorities
drm/panfrost: Clear MMU irqs before handling the fault
drm/panfrost: Don't try to map pages that are already mapped
drm/radeon: fix copy of uninitialized variable back to userspace
drm/dp_mst: Revise broadcast msg lct & lcr
drm/dp_mst: Set CLEAR_PAYLOAD_ID_TABLE as broadcast
drm: bridge/panel: Cleanup connector on bridge detach
drm/amd/display: Reject non-zero src_y and src_x for video planes
drm/amdgpu: fix concurrent VM flushes on Vega/Navi v2
ALSA: hda/realtek: Re-order ALC882 Acer quirk table entries
ALSA: hda/realtek: Re-order ALC882 Sony quirk table entries
ALSA: hda/realtek: Re-order ALC882 Clevo quirk table entries
ALSA: hda/realtek: Re-order ALC269 HP quirk table entries
ALSA: hda/realtek: Re-order ALC269 Acer quirk table entries
ALSA: hda/realtek: Re-order ALC269 Dell quirk table entries
ALSA: hda/realtek: Re-order ALC269 ASUS quirk table entries
ALSA: hda/realtek: Re-order ALC269 Sony quirk table entries
ALSA: hda/realtek: Re-order ALC269 Lenovo quirk table entries
ALSA: hda/realtek: Re-order remaining ALC269 quirk table entries
ALSA: hda/realtek: Re-order ALC662 quirk table entries
ALSA: hda/realtek: Remove redundant entry for ALC861 Haier/Uniwill devices
ALSA: hda/realtek: ALC285 Thinkpad jack pin quirk is unreachable
ALSA: hda/realtek: Fix speaker amp on HP Envy AiO 32
KVM: s390: VSIE: correctly handle MVPG when in VSIE
KVM: s390: split kvm_s390_logical_to_effective
KVM: s390: fix guarded storage control register handling
s390: fix detection of vector enhancements facility 1 vs. vector packed decimal facility
KVM: s390: VSIE: fix MVPG handling for prefixing and MSO
KVM: s390: split kvm_s390_real_to_abs
KVM: s390: extend kvm_s390_shadow_fault to return entry pointer
KVM: x86/mmu: Alloc page for PDPTEs when shadowing 32-bit NPT with 64-bit
KVM: x86: Remove emulator's broken checks on CR0/CR3/CR4 loads
KVM: nSVM: Set the shadow root level to the TDP level for nested NPT
KVM: SVM: Don't strip the C-bit from CR2 on #PF interception
KVM: SVM: Do not allow SEV/SEV-ES initialization after vCPUs are created
KVM: SVM: Inject #GP on guest MSR_TSC_AUX accesses if RDTSCP unsupported
KVM: nVMX: Defer the MMU reload to the normal path on an EPTP switch
KVM: nVMX: Truncate bits 63:32 of VMCS field on nested check in !64-bit
KVM: nVMX: Truncate base/index GPR value on address calc in !64-bit
KVM: arm/arm64: Fix KVM_VGIC_V3_ADDR_TYPE_REDIST read
KVM: Destroy I/O bus devices on unregister failure _after_ sync'ing SRCU
KVM: Stop looking for coalesced MMIO zones if the bus is destroyed
KVM: arm64: Fully zero the vcpu state on reset
KVM: arm64: Fix KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION read
Revert "drivers/net/wan/hdlc_fr: Fix a double free in pvc_xmit"
Revert "i3c master: fix missing destroy_workqueue() on error in i3c_master_register"
ovl: fix missing revert_creds() on error path
Revert "drm/qxl: do not run release if qxl failed to init"
usb: gadget: pch_udc: Revert d3cb25a121 completely
Revert "tools/power turbostat: adjust for temperature offset"
firmware: xilinx: Fix dereferencing freed memory
firmware: xilinx: Add a blank line after function declaration
firmware: xilinx: Remove zynqmp_pm_get_eemi_ops() in IS_REACHABLE(CONFIG_ZYNQMP_FIRMWARE)
fpga: fpga-mgr: xilinx-spi: fix error messages on -EPROBE_DEFER
crypto: sun8i-ss - fix result memory leak on error path
memory: gpmc: fix out of bounds read and dereference on gpmc_cs[]
ARM: dts: exynos: correct fuel gauge interrupt trigger level on GT-I9100
ARM: dts: exynos: correct fuel gauge interrupt trigger level on Midas family
ARM: dts: exynos: correct MUIC interrupt trigger level on Midas family
ARM: dts: exynos: correct PMIC interrupt trigger level on Midas family
ARM: dts: exynos: correct PMIC interrupt trigger level on Odroid X/U3 family
ARM: dts: exynos: correct PMIC interrupt trigger level on SMDK5250
ARM: dts: exynos: correct PMIC interrupt trigger level on Snow
ARM: dts: s5pv210: correct fuel gauge interrupt trigger level on Fascinate family
ARM: dts: renesas: Add mmc aliases into R-Car Gen2 board dts files
arm64: dts: renesas: Add mmc aliases into board dts files
x86/platform/uv: Set section block size for hubless architectures
serial: stm32: fix code cleaning warnings and checks
serial: stm32: add "_usart" prefix in functions name
serial: stm32: fix probe and remove order for dma
serial: stm32: Use of_device_get_match_data()
serial: stm32: fix startup by enabling usart for reception
serial: stm32: fix incorrect characters on console
serial: stm32: fix TX and RX FIFO thresholds
serial: stm32: fix a deadlock condition with wakeup event
serial: stm32: fix wake-up flag handling
serial: stm32: fix a deadlock in set_termios
serial: stm32: fix tx dma completion, release channel
serial: stm32: call stm32_transmit_chars locked
serial: stm32: fix FIFO flush in startup and set_termios
serial: stm32: add FIFO flush when port is closed
serial: stm32: fix tx_empty condition
usb: typec: tcpci: Check ROLE_CONTROL while interpreting CC_STATUS
usb: typec: tps6598x: Fix return value check in tps6598x_probe()
usb: typec: stusb160x: fix return value check in stusb160x_probe()
regmap: set debugfs_name to NULL after it is freed
spi: rockchip: avoid objtool warning
mtd: rawnand: fsmc: Fix error code in fsmc_nand_probe()
mtd: rawnand: brcmnand: fix OOB R/W with Hamming ECC
mtd: Handle possible -EPROBE_DEFER from parse_mtd_partitions()
mtd: rawnand: qcom: Return actual error code instead of -ENODEV
mtd: don't lock when recursively deleting partitions
mtd: maps: fix error return code of physmap_flash_remove()
ARM: dts: stm32: fix usart 2 & 3 pinconf to wake up with flow control
arm64: dts: qcom: sm8250: Fix level triggered PMU interrupt polarity
arm64: dts: qcom: sm8250: Fix timer interrupt to specify EL2 physical timer
arm64: dts: qcom: sdm845: fix number of pins in 'gpio-ranges'
arm64: dts: qcom: sm8150: fix number of pins in 'gpio-ranges'
arm64: dts: qcom: sm8250: fix number of pins in 'gpio-ranges'
arm64: dts: qcom: db845c: fix correct powerdown pin for WSA881x
crypto: sun8i-ss - Fix memory leak of object d when dma_iv fails to map
spi: stm32: drop devres version of spi_register_master
regulator: bd9576: Fix return from bd957x_probe()
arm64: dts: renesas: r8a77980: Fix vin4-7 endpoint binding
spi: stm32: Fix use-after-free on unbind
x86/microcode: Check for offline CPUs before requesting new microcode
devtmpfs: fix placement of complete() call
usb: gadget: pch_udc: Replace cpu_to_le32() by lower_32_bits()
usb: gadget: pch_udc: Check if driver is present before calling ->setup()
usb: gadget: pch_udc: Check for DMA mapping error
usb: gadget: pch_udc: Initialize device pointer before use
usb: gadget: pch_udc: Provide a GPIO line used on Intel Minnowboard (v1)
crypto: ccp - fix command queuing to TEE ring buffer
crypto: qat - don't release uninitialized resources
crypto: qat - ADF_STATUS_PF_RUNNING should be set after adf_dev_init
fotg210-udc: Fix DMA on EP0 for length > max packet size
fotg210-udc: Fix EP0 IN requests bigger than two packets
fotg210-udc: Remove a dubious condition leading to fotg210_done
fotg210-udc: Mask GRP2 interrupts we don't handle
fotg210-udc: Don't DMA more than the buffer can take
fotg210-udc: Complete OUT requests on short packets
usb: gadget: s3c: Fix incorrect resources releasing
usb: gadget: s3c: Fix the error handling path in 's3c2410_udc_probe()'
dt-bindings: serial: stm32: Use 'type: object' instead of false for 'additionalProperties'
mtd: require write permissions for locking and badblock ioctls
arm64: dts: renesas: r8a779a0: Fix PMU interrupt
bus: qcom: Put child node before return
soundwire: bus: Fix device found flag correctly
phy: ti: j721e-wiz: Delete "clk_div_sel" clk provider during cleanup
phy: marvell: ARMADA375_USBCLUSTER_PHY should not default to y, unconditionally
arm64: dts: mediatek: fix reset GPIO level on pumpkin
NFSD: Fix sparse warning in nfs4proc.c
NFSv4.2: fix copy stateid copying for the async copy
crypto: poly1305 - fix poly1305_core_setkey() declaration
crypto: qat - fix error path in adf_isr_resource_alloc()
usb: gadget: aspeed: fix dma map failure
USB: gadget: udc: fix wrong pointer passed to IS_ERR() and PTR_ERR()
drivers: nvmem: Fix voltage settings for QTI qfprom-efuse
driver core: platform: Declare early_platform_cleanup() prototype
memory: pl353: fix mask of ECC page_size config register
soundwire: stream: fix memory leak in stream config error path
m68k: mvme147,mvme16x: Don't wipe PCC timer config bits
firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool
firmware: qcom_scm: Reduce locking section for __get_convention()
firmware: qcom_scm: Workaround lack of "is available" call on SC7180
iio: adc: Kconfig: make AD9467 depend on ADI_AXI_ADC symbol
mtd: rawnand: gpmi: Fix a double free in gpmi_nand_init
irqchip/gic-v3: Fix OF_BAD_ADDR error handling
staging: comedi: tests: ni_routes_test: Fix compilation error
staging: rtl8192u: Fix potential infinite loop
staging: fwserial: fix TIOCSSERIAL implementation
staging: fwserial: fix TIOCGSERIAL implementation
staging: greybus: uart: fix unprivileged TIOCCSERIAL
soc: qcom: pdr: Fix error return code in pdr_register_listener
PM / devfreq: Use more accurate returned new_freq as resume_freq
clocksource/drivers/timer-ti-dm: Fix posted mode status check order
clocksource/drivers/timer-ti-dm: Add missing set_state_oneshot_stopped
clocksource/drivers/ingenic_ost: Fix return value check in ingenic_ost_probe()
spi: Fix use-after-free with devm_spi_alloc_*
spi: fsl: add missing iounmap() on error in of_fsl_spi_probe()
soc: qcom: mdt_loader: Validate that p_filesz < p_memsz
soc: qcom: mdt_loader: Detect truncated read of segments
PM: runtime: Replace inline function pm_runtime_callbacks_present()
cpuidle: Fix ARM_QCOM_SPM_CPUIDLE configuration
ACPI: CPPC: Replace cppc_attr with kobj_attribute
crypto: allwinner - add missing CRYPTO_ prefix
crypto: sun8i-ss - Fix memory leak of pad
crypto: sa2ul - Fix memory leak of rxd
crypto: qat - Fix a double free in adf_create_ring
cpufreq: armada-37xx: Fix setting TBG parent for load levels
clk: mvebu: armada-37xx-periph: remove .set_parent method for CPU PM clock
cpufreq: armada-37xx: Fix the AVS value for load L1
clk: mvebu: armada-37xx-periph: Fix switching CPU freq from 250 Mhz to 1 GHz
clk: mvebu: armada-37xx-periph: Fix workaround for switching from L1 to L0
cpufreq: armada-37xx: Fix driver cleanup when registration failed
cpufreq: armada-37xx: Fix determining base CPU frequency
spi: spi-zynqmp-gqspi: use wait_for_completion_timeout to make zynqmp_qspi_exec_op not interruptible
spi: spi-zynqmp-gqspi: add mutex locking for exec_op
spi: spi-zynqmp-gqspi: transmit dummy circles by using the controller's internal functionality
spi: spi-zynqmp-gqspi: fix incorrect operating mode in zynqmp_qspi_read_op
spi: fsl-lpspi: Fix PM reference leak in lpspi_prepare_xfer_hardware()
usb: gadget: r8a66597: Add missing null check on return from platform_get_resource
USB: cdc-acm: fix unprivileged TIOCCSERIAL
USB: cdc-acm: fix TIOCGSERIAL implementation
tty: actually undefine superseded ASYNC flags
tty: fix return value for unsupported ioctls
tty: Remove dead termiox code
tty: fix return value for unsupported termiox ioctls
serial: core: return early on unsupported ioctls
firmware: qcom-scm: Fix QCOM_SCM configuration
node: fix device cleanups in error handling code
crypto: chelsio - Read rxchannel-id from firmware
usbip: vudc: fix missing unlock on error in usbip_sockfd_store()
m68k: Add missing mmap_read_lock() to sys_cacheflush()
spi: spi-zynqmp-gqspi: Fix missing unlock on error in zynqmp_qspi_exec_op()
memory: renesas-rpc-if: fix possible NULL pointer dereference of resource
memory: samsung: exynos5422-dmc: handle clk_set_parent() failure
security: keys: trusted: fix TPM2 authorizations
platform/x86: pmc_atom: Match all Beckhoff Automation baytrail boards with critclk_systems DMI table
ARM: dts: aspeed: Rainier: Fix humidity sensor bus address
Drivers: hv: vmbus: Use after free in __vmbus_open()
spi: spi-zynqmp-gqspi: fix clk_enable/disable imbalance issue
spi: spi-zynqmp-gqspi: fix hang issue when suspend/resume
spi: spi-zynqmp-gqspi: fix use-after-free in zynqmp_qspi_exec_op
spi: spi-zynqmp-gqspi: return -ENOMEM if dma_map_single fails
x86/platform/uv: Fix !KEXEC build failure
hwmon: (pmbus/pxe1610) don't bail out when not all pages are active
Drivers: hv: vmbus: Increase wait time for VMbus unload
PM: hibernate: x86: Use crc32 instead of md5 for hibernation e820 integrity check
usb: dwc2: Fix host mode hibernation exit with remote wakeup flow.
usb: dwc2: Fix hibernation between host and device modes.
ttyprintk: Add TTY hangup callback.
serial: omap: don't disable rs485 if rts gpio is missing
serial: omap: fix rs485 half-duplex filtering
xen-blkback: fix compatibility bug with single page rings
soc: aspeed: fix a ternary sign expansion bug
drm/tilcdc: send vblank event when disabling crtc
drm/stm: Fix bus_flags handling
drm/amd/display: Fix off by one in hdmi_14_process_transaction()
drm/mcde/panel: Inverse misunderstood flag
sched/fair: Fix shift-out-of-bounds in load_balance()
afs: Fix updating of i_mode due to 3rd party change
rcu: Remove spurious instrumentation_end() in rcu_nmi_enter()
media: vivid: fix assignment of dev->fbuf_out_flags
media: saa7134: use sg_dma_len when building pgtable
media: saa7146: use sg_dma_len when building pgtable
media: omap4iss: return error code when omap4iss_get() failed
media: rkisp1: rsz: crash fix when setting src format
media: aspeed: fix clock handling logic
drm/probe-helper: Check epoch counter in output_poll_execute()
media: venus: core: Fix some resource leaks in the error path of 'venus_probe()'
media: platform: sunxi: sun6i-csi: fix error return code of sun6i_video_start_streaming()
media: m88ds3103: fix return value check in m88ds3103_probe()
media: docs: Fix data organization of MEDIA_BUS_FMT_RGB101010_1X30
media: [next] staging: media: atomisp: fix memory leak of object flash
media: atomisp: Fixed error handling path
media: m88rs6000t: avoid potential out-of-bounds reads on arrays
media: atomisp: Fix use after free in atomisp_alloc_css_stat_bufs()
drm/amdkfd: fix build error with AMD_IOMMU_V2=m
of: overlay: fix for_each_child.cocci warnings
x86/kprobes: Fix to check non boostable prefixes correctly
selftests: fix prepending $(OUTPUT) to $(TEST_PROGS)
pata_arasan_cf: fix IRQ check
pata_ipx4xx_cf: fix IRQ check
sata_mv: add IRQ checks
ata: libahci_platform: fix IRQ check
seccomp: Fix CONFIG tests for Seccomp_filters
nvme-tcp: block BH in sk state_change sk callback
nvmet-tcp: fix incorrect locking in state_change sk callback
clk: imx: Fix reparenting of UARTs not associated with stdout
power: supply: bq25980: Move props from battery node
nvme: retrigger ANA log update if group descriptor isn't found
media: i2c: imx219: Move out locking/unlocking of vflip and hflip controls from imx219_set_stream
media: i2c: imx219: Balance runtime PM use-count
media: v4l2-ctrls.c: fix race condition in hdl->requests list
vfio/fsl-mc: Re-order vfio_fsl_mc_probe()
vfio/pci: Move VGA and VF initialization to functions
vfio/pci: Re-order vfio_pci_probe()
vfio/mdev: Do not allow a mdev_type to have a NULL parent pointer
clk: zynqmp: move zynqmp_pll_set_mode out of round_rate callback
clk: zynqmp: pll: add set_pll_mode to check condition in zynqmp_pll_enable
drm: xlnx: zynqmp: fix a memset in zynqmp_dp_train()
clk: qcom: a53-pll: Add missing MODULE_DEVICE_TABLE
clk: qcom: apss-ipq-pll: Add missing MODULE_DEVICE_TABLE
drm/amd/display: use GFP_ATOMIC in dcn20_resource_construct
drm/radeon: Fix a missing check bug in radeon_dp_mst_detect()
clk: uniphier: Fix potential infinite loop
scsi: pm80xx: Increase timeout for pm80xx mpi_uninit_check()
scsi: pm80xx: Fix potential infinite loop
scsi: ufs: ufshcd-pltfrm: Fix deferred probing
scsi: hisi_sas: Fix IRQ checks
scsi: jazz_esp: Add IRQ check
scsi: sun3x_esp: Add IRQ check
scsi: sni_53c710: Add IRQ check
scsi: ibmvfc: Fix invalid state machine BUG_ON()
mailbox: sprd: Introduce refcnt when clients requests/free channels
mfd: stm32-timers: Avoid clearing auto reload register
nvmet-tcp: fix a segmentation fault during io parsing error
nvme-pci: don't simple map sgl when sgls are disabled
media: cedrus: Fix H265 status definitions
HSI: core: fix resource leaks in hsi_add_client_from_dt()
x86/events/amd/iommu: Fix sysfs type mismatch
perf/amd/uncore: Fix sysfs type mismatch
io_uring: fix overflows checks in provide buffers
sched/debug: Fix cgroup_path[] serialization
drivers/block/null_blk/main: Fix a double free in null_init.
xsk: Respect device's headroom and tailroom on generic xmit path
HID: plantronics: Workaround for double volume key presses
perf symbols: Fix dso__fprintf_symbols_by_name() to return the number of printed chars
ASoC: Intel: boards: sof-wm8804: add check for PLL setting
ASoC: Intel: Skylake: Compile when any configuration is selected
RDMA/mlx5: Fix mlx5 rates to IB rates map
wilc1000: write value to WILC_INTR2_ENABLE register
KVM: x86/mmu: Retry page faults that hit an invalid memslot
Bluetooth: avoid deadlock between hci_dev->lock and socket lock
net: lapbether: Prevent racing when checking whether the netif is running
libbpf: Add explicit padding to bpf_xdp_set_link_opts
bpftool: Fix maybe-uninitialized warnings
iommu: Check dev->iommu in iommu_dev_xxx functions
iommu/vt-d: Reject unsupported page request modes
selftests/bpf: Re-generate vmlinux.h and BPF skeletons if bpftool changed
libbpf: Add explicit padding to btf_dump_emit_type_decl_opts
powerpc/fadump: Mark fadump_calculate_reserve_size as __init
powerpc/prom: Mark identical_pvr_fixup as __init
MIPS: fix local_irq_{disable,enable} in asmmacro.h
ima: Fix the error code for restoring the PCR value
inet: use bigger hash table for IP ID generation
pinctrl: pinctrl-single: remove unused parameter
pinctrl: pinctrl-single: fix pcs_pin_dbg_show() when bits_per_mux is not zero
MIPS: loongson64: fix bug when PAGE_SIZE > 16KB
ASoC: wm8960: Remove bitclk relax condition in wm8960_configure_sysclk
iommu/arm-smmu-v3: add bit field SFM into GERROR_ERR_MASK
RDMA/mlx5: Fix drop packet rule in egress table
IB/isert: Fix a use after free in isert_connect_request
powerpc: Fix HAVE_HARDLOCKUP_DETECTOR_ARCH build configuration
MIPS/bpf: Enable bpf_probe_read{, str}() on MIPS again
gpio: guard gpiochip_irqchip_add_domain() with GPIOLIB_IRQCHIP
ALSA: core: remove redundant spin_lock pair in snd_card_disconnect
net: phy: lan87xx: fix access to wrong register of LAN87xx
udp: never accept GSO_FRAGLIST packets
powerpc/pseries: Only register vio drivers if vio bus exists
net/tipc: fix missing destroy_workqueue() on error in tipc_crypto_start()
bug: Remove redundant condition check in report_bug
RDMA/core: Fix corrupted SL on passive side
nfc: pn533: prevent potential memory corruption
net: hns3: Limiting the scope of vector_ring_chain variable
mips: bmips: fix syscon-reboot nodes
iommu/vt-d: Don't set then clear private data in prq_event_thread()
iommu: Fix a boundary issue to avoid performance drop
iommu/vt-d: Report right snoop capability when using FL for IOVA
iommu/vt-d: Report the right page fault address
iommu/vt-d: Preset Access/Dirty bits for IOVA over FL
iommu/vt-d: Remove WO permissions on second-level paging entries
iommu/vt-d: Invalidate PASID cache when root/context entry changed
ALSA: usb-audio: Add error checks for usb_driver_claim_interface() calls
HID: lenovo: Use brightness_set_blocking callback for setting LEDs brightness
HID: lenovo: Fix lenovo_led_set_tp10ubkbd() error handling
HID: lenovo: Check hid_get_drvdata() returns non NULL in lenovo_event()
HID: lenovo: Map mic-mute button to KEY_F20 instead of KEY_MICMUTE
KVM: arm64: Initialize VCPU mdcr_el2 before loading it
ASoC: simple-card: fix possible uninitialized single_cpu local variable
liquidio: Fix unintented sign extension of a left shift of a u16
IB/hfi1: Use kzalloc() for mmu_rb_handler allocation
powerpc/64s: Fix pte update for kernel memory on radix
powerpc/perf: Fix PMU constraint check for EBB events
powerpc: iommu: fix build when neither PCI or IBMVIO is set
mac80211: bail out if cipher schemes are invalid
perf vendor events amd: Fix broken L2 Cache Hits from L2 HWPF metric
xfs: fix return of uninitialized value in variable error
rtw88: Fix an error code in rtw_debugfs_set_rsvd_page()
mt7601u: fix always true expression
mt76: mt7615: fix tx skb dma unmap
mt76: mt7915: fix tx skb dma unmap
mt76: mt7915: fix aggr len debugfs node
mt76: mt7615: fix mib stats counter reporting to mac80211
mt76: mt7915: fix mib stats counter reporting to mac80211
mt76: mt7663s: make all of packets 4-bytes aligned in sdio tx aggregation
mt76: mt7663s: fix the possible device hang in high traffic
KVM: PPC: Book3S HV P9: Restore host CTRL SPR after guest exit
ovl: invalidate readdir cache on changes to dir with origin
RDMA/qedr: Fix error return code in qedr_iw_connect()
IB/hfi1: Fix error return code in parse_platform_config()
RDMA/bnxt_re: Fix error return code in bnxt_qplib_cq_process_terminal()
cxgb4: Fix unintentional sign extension issues
net: thunderx: Fix unintentional sign extension issue
RDMA/srpt: Fix error return code in srpt_cm_req_recv()
RDMA/rtrs-clt: destroy sysfs after removing session from active list
i2c: cadence: fix reference leak when pm_runtime_get_sync fails
i2c: img-scb: fix reference leak when pm_runtime_get_sync fails
i2c: imx-lpi2c: fix reference leak when pm_runtime_get_sync fails
i2c: imx: fix reference leak when pm_runtime_get_sync fails
i2c: omap: fix reference leak when pm_runtime_get_sync fails
i2c: sprd: fix reference leak when pm_runtime_get_sync fails
i2c: stm32f7: fix reference leak when pm_runtime_get_sync fails
i2c: xiic: fix reference leak when pm_runtime_get_sync fails
i2c: cadence: add IRQ check
i2c: emev2: add IRQ check
i2c: jz4780: add IRQ check
i2c: mlxbf: add IRQ check
i2c: rcar: make sure irq is not threaded on Gen2 and earlier
i2c: rcar: protect against supurious interrupts on V3U
i2c: rcar: add IRQ check
i2c: sh7760: add IRQ check
powerpc/xive: Drop check on irq_data in xive_core_debug_show()
powerpc/xive: Fix xmon command "dxi"
ASoC: ak5558: correct reset polarity
net/mlx5: Fix bit-wise and with zero
net/packet: make packet_fanout.arr size configurable up to 64K
net/packet: remove data races in fanout operations
drm/i915/gvt: Fix error code in intel_gvt_init_device()
iommu/amd: Put newline after closing bracket in warning
perf beauty: Fix fsconfig generator
drm/amd/pm: fix error code in smu_set_power_limit()
MIPS: pci-legacy: stop using of_pci_range_to_resource
powerpc/pseries: extract host bridge from pci_bus prior to bus removal
powerpc/smp: Reintroduce cpu_core_mask
KVM: x86: dump_vmcs should not assume GUEST_IA32_EFER is valid
rtlwifi: 8821ae: upgrade PHY and RF parameters
wlcore: fix overlapping snprintf arguments in debugfs
i2c: sh7760: fix IRQ error path
i2c: mediatek: Fix wrong dma sync flag
mwl8k: Fix a double Free in mwl8k_probe_hw
netfilter: nft_payload: fix C-VLAN offload support
netfilter: nftables_offload: VLAN id needs host byteorder in flow dissector
netfilter: nftables_offload: special ethertype handling for VLAN
vsock/vmci: log once the failed queue pair allocation
libbpf: Initialize the bpf_seq_printf parameters array field by field
net: ethernet: ixp4xx: Set the DMA masks explicitly
gro: fix napi_gro_frags() Fast GRO breakage due to IP alignment check
RDMA/cxgb4: add missing qpid increment
RDMA/i40iw: Fix error unwinding when i40iw_hmc_sd_one fails
ALSA: usb: midi: don't return -ENOMEM when usb_urb_ep_type_check fails
sfc: ef10: fix TX queue lookup in TX event handling
vsock/virtio: free queued packets when closing socket
net: marvell: prestera: fix port event handling on init
net: davinci_emac: Fix incorrect masking of tx and rx error channel
mt76: mt7615: fix memleak when mt7615_unregister_device()
crypto: ccp: Detect and reject "invalid" addresses destined for PSP
nfp: devlink: initialize the devlink port attribute "lanes"
net: stmmac: fix TSO and TBS feature enabling during driver open
net: renesas: ravb: Fix a stuck issue when a lot of frames are received
net: phy: intel-xway: enable integrated led functions
RDMA/rxe: Fix a bug in rxe_fill_ip_info()
RDMA/core: Add CM to restrack after successful attachment to a device
powerpc/64: Fix the definition of the fixmap area
ath9k: Fix error check in ath9k_hw_read_revisions() for PCI devices
ath10k: Fix a use after free in ath10k_htc_send_bundle
ath10k: Fix ath10k_wmi_tlv_op_pull_peer_stats_info() unlock without lock
wlcore: Fix buffer overrun by snprintf due to incorrect buffer size
powerpc/perf: Fix the threshold event selection for memory events in power10
powerpc/52xx: Fix an invalid ASM expression ('addi' used instead of 'add')
net: phy: marvell: fix m88e1011_set_downshift
net: phy: marvell: fix m88e1111_set_downshift
net: enetc: fix link error again
bnxt_en: fix ternary sign extension bug in bnxt_show_temp()
ARM: dts: uniphier: Change phy-mode to RGMII-ID to enable delay pins for RTL8211E
arm64: dts: uniphier: Change phy-mode to RGMII-ID to enable delay pins for RTL8211E
net: geneve: modify IP header check in geneve6_xmit_skb and geneve_xmit_skb
selftests: net: mirror_gre_vlan_bridge_1q: Make an FDB entry static
selftests: mlxsw: Remove a redundant if statement in tc_flower_scale test
bnxt_en: Fix RX consumer index logic in the error path.
KVM: VMX: Intercept FS/GS_BASE MSR accesses for 32-bit KVM
net:emac/emac-mac: Fix a use after free in emac_mac_tx_buf_send
selftests/bpf: Fix BPF_CORE_READ_BITFIELD() macro
selftests/bpf: Fix field existence CO-RE reloc tests
selftests/bpf: Fix core_reloc test runner
bpf: Fix propagation of 32 bit unsigned bounds from 64 bit bounds
RDMA/siw: Fix a use after free in siw_alloc_mr
RDMA/bnxt_re: Fix a double free in bnxt_qplib_alloc_res
net: bridge: mcast: fix broken length + header check for MRDv6 Adv.
net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
perf tools: Change fields type in perf_record_time_conv
perf jit: Let convert_timestamp() to be backwards-compatible
perf session: Add swap operation for event TIME_CONV
ia64: fix EFI_DEBUG build
kfifo: fix ternary sign extension bugs
mm/sl?b.c: remove ctor argument from kmem_cache_flags
mm: memcontrol: slab: fix obtain a reference to a freeing memcg
mm/sparse: add the missing sparse_buffer_fini() in error branch
mm/memory-failure: unnecessary amount of unmapping
afs: Fix speculative status fetches
bpf: Fix alu32 const subreg bound tracking on bitwise operations
bpf, ringbuf: Deny reserve of buffers larger than ringbuf
bpf: Prevent writable memory-mapping of read-only ringbuf pages
arm64: Remove arm64_dma32_phys_limit and its uses
net: Only allow init netns to set default tcp cong to a restricted algo
smp: Fix smp_call_function_single_async prototype
Revert "net/sctp: fix race condition in sctp_destroy_sock"
sctp: delay auto_asconf init until binding the first addr
Linux 5.10.37
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I5bee89c285d9dd72de967b0e70d96951ae4e06ae
[ Upstream commit 24d209dba5 ]
When core is in hibernation in host mode and a device cable
was connected then driver exited from device hibernation.
However, registers saved for host mode and when exited from
device hibernation register restore would be done for device
register which was wrong because there was no device registers
stored to restore.
- Added dwc_handle_gpwrdn_disc_det() function which handles
gpwrdn disconnect detect flow and exits hibernation
without restoring the registers.
- Updated exiting from hibernation in GPWRDN_STS_CHGINT with
calling dwc_handle_gpwrdn_disc_det() function. Here no register
is restored which is the solution described above.
Fixes: 65c9c4c6b0 ("usb: dwc2: Add dwc2_handle_gpwrdn_intr() handler")
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com>
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/20210416124715.75355A005D@mailhost.synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c2db8d7b95 ]
Added setting "port_connect_status_change" flag to "1" in order
to re-enumerate, because after exit from hibernation port
connection status is not detected.
Fixes: c5c403dc43 ("usb: dwc2: Add host/device hibernation functions")
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com>
Link: https://lore.kernel.org/r/20210416124707.5EEC2A005D@mailhost.synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4969602741 ]
TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.
The xmit_fifo_size parameter could be used to set the hardware transmit
fifo size of a legacy UART when it could not be detected, but the
interface is limited to eight bits and should be left unset when it is
not used.
Similarly, baud_base could be used to set the UART base clock when it
could not be detected, but might as well be left unset when it is not
known (which is the case for CDC).
Fix the cdc-acm TIOCGSERIAL implementation by dropping its custom
interpretation of the unused xmit_fifo_size and baud_base fields, which
overflowed the former with the URB buffer size and set the latter to the
current line speed. Also return the port line number, which is the only
other value used besides the close parameters.
Note that the current line speed can still be retrieved through the
standard termios interfaces.
Fixes: 18c75720e6 ("USB: allow users to run setserial with cdc-acm")
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210408131602.27956-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd5619582d ]
TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.
A non-privileged user has only ever been able to set the since long
deprecated ASYNC_SPD flags and trying to change any other *supported*
feature should result in -EPERM being returned. Setting the current
values for any supported features should return success.
Fix the cdc-acm implementation which instead indicated that the
TIOCSSERIAL ioctl was not even implemented when a non-privileged user
set the current values.
Fixes: ba2d8ce9db ("cdc-acm: implement TIOCSSERIAL to avoid blocking close(2)")
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210408131602.27956-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c2076090c ]
The call to platform_get_resource can potentially return a NULL pointer
on failure, so add this check and return -EINVAL if it fails.
Fixes: c41442474a ("usb: gadget: R8A66597 peripheral controller support.")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Addresses-Coverity: ("Dereference null return")
Link: https://lore.kernel.org/r/20210406184510.433497-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd4d607044 ]
Currently the virtual port_dev device is passed to DMA API, and this is
wrong because the device passed to DMA API calls must be the actual
hardware device performing the DMA.
The patch replaces usb_gadget_map_request/usb_gadget_unmap_request APIs
with usb_gadget_map_request_by_dev/usb_gadget_unmap_request_by_dev APIs
so the DMA capable platform device can be passed to the DMA APIs.
The patch fixes below backtrace detected on Facebook AST2500 OpenBMC
platforms:
[<80106550>] show_stack+0x20/0x24
[<80106868>] dump_stack+0x28/0x30
[<80823540>] __warn+0xfc/0x110
[<8011ac30>] warn_slowpath_fmt+0xb0/0xc0
[<8011ad44>] dma_map_page_attrs+0x24c/0x314
[<8016a27c>] usb_gadget_map_request_by_dev+0x100/0x1e4
[<805cedd8>] usb_gadget_map_request+0x1c/0x20
[<805cefbc>] ast_vhub_epn_queue+0xa0/0x1d8
[<7f02f710>] usb_ep_queue+0x48/0xc4
[<805cd3e8>] ecm_do_notify+0xf8/0x248
[<7f145920>] ecm_set_alt+0xc8/0x1d0
[<7f145c34>] composite_setup+0x680/0x1d30
[<7f00deb8>] ast_vhub_ep0_handle_setup+0xa4/0x1bc
[<7f02ee94>] ast_vhub_dev_irq+0x58/0x84
[<7f0309e0>] ast_vhub_irq+0xb0/0x1c8
[<7f02e118>] __handle_irq_event_percpu+0x50/0x19c
[<8015e5bc>] handle_irq_event_percpu+0x38/0x8c
[<8015e758>] handle_irq_event+0x38/0x4c
Fixes: 7ecca2a408 ("usb/gadget: Add driver for Aspeed SoC virtual hub")
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Link: https://lore.kernel.org/r/20210331045831.28700-1-rentao.bupt@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5242861ec ]
Some 'clk_prepare_enable()' and 'clk_get()' must be undone in the error
handling path of the probe function, as already done in the remove
function.
Fixes: 3fc154b6b8 ("USB Gadget driver for Samsung s3c2410 ARM SoC")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/2bee52e4ce968f48b4c32545cf8f3b2ab825ba82.1616830026.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 42067ccd9e ]
Since commit 188db4435a ("usb: gadget: s3c: use platform resources"),
'request_mem_region()' and 'ioremap()' are no more used, so they don't need
to be undone in the error handling path of the probe and in the remove
function.
Remove these calls and the unneeded 'rsrc_start' and 'rsrc_len' global
variables.
Fixes: 188db4435a ("usb: gadget: s3c: use platform resources")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/b317638464f188159bd8eea44427dd359e480625.1616830026.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75bb93be00 ]
A short packet indicates the end of a transfer and marks the request as
complete.
Fixes: b84a8dee23 ("usb: gadget: add Faraday fotg210_udc driver")
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Link: https://lore.kernel.org/r/20210324141115.9384-8-fabian@ritter-vogt.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e7c2510bd ]
Before this, it wrote as much as available into the buffer, even if it
didn't fit.
Fixes: b84a8dee23 ("usb: gadget: add Faraday fotg210_udc driver")
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Link: https://lore.kernel.org/r/20210324141115.9384-7-fabian@ritter-vogt.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9aee3a23d6 ]
Currently it leaves unhandled interrupts unmasked, but those are never
acked. In the case of a "device idle" interrupt, this leads to an
effectively frozen system until plugging it in.
Fixes: b84a8dee23 ("usb: gadget: add Faraday fotg210_udc driver")
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Link: https://lore.kernel.org/r/20210324141115.9384-5-fabian@ritter-vogt.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7f755b243 ]
When the EP0 IN request was not completed but less than a packet sent,
it would complete the request successfully. That doesn't make sense
and can't really happen as fotg210_start_dma always sends
min(length, maxpkt) bytes.
Fixes: b84a8dee23 ("usb: gadget: add Faraday fotg210_udc driver")
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Link: https://lore.kernel.org/r/20210324141115.9384-4-fabian@ritter-vogt.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 078ba93565 ]
For a 134 Byte packet, it sends the first two 64 Byte packets just fine,
but then notice that less than a packet is remaining and call fotg210_done
without actually sending the rest.
Fixes: b84a8dee23 ("usb: gadget: add Faraday fotg210_udc driver")
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Link: https://lore.kernel.org/r/20210324141115.9384-3-fabian@ritter-vogt.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 755915fc28 ]
For a 75 Byte request, it would send the first 64 separately, then detect
that the remaining 11 Byte fit into a single DMA, but due to this bug set
the length to the original 75 Bytes. This leads to a DMA failure (which is
ignored...) and the request completes without the remaining bytes having
been sent.
Fixes: b84a8dee23 ("usb: gadget: add Faraday fotg210_udc driver")
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Link: https://lore.kernel.org/r/20210324141115.9384-2-fabian@ritter-vogt.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 049d3db625 ]
Intel Minnowboard (v1) uses SCH GPIO line SUS7 (i.e. 12)
for VBUS sense. Provide a DMI based quirk to have it's being used.
Fixes: e20849a8c8 ("usb: gadget: pch_udc: Convert to use GPIO descriptors")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210323153626.54908-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 971d080212 ]
During conversion to use GPIO descriptors the device pointer,
which is applied to devm_gpiod_get(), is not yet initialized.
Move initialization in the ->probe() in order to have it set before use.
Fixes: e20849a8c8 ("usb: gadget: pch_udc: Convert to use GPIO descriptors")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210323153626.54908-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a28d77e35 ]
DMA mapping might fail, we have to check it with dma_mapping_error().
Otherwise DMA-API is not happy:
DMA-API: pch_udc 0000:02:02.4: device driver failed to check map error[device address=0x00000000027ee678] [size=64 bytes] [mapped as single]
Fixes: abab0c67c0 ("usb: pch_udc: Fixed issue which does not work with g_serial")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210323153626.54908-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fbdbbe6d3e ]
Since we have a separate routine for VBUS sense, the interrupt may occur
before gadget driver is present. Hence, ->setup() call may oops the kernel:
[ 55.245843] BUG: kernel NULL pointer dereference, address: 00000010
...
[ 55.245843] EIP: pch_udc_isr.cold+0x162/0x33f
...
[ 55.245843] <IRQ>
[ 55.245843] ? pch_udc_svc_data_out+0x160/0x160
Check if driver is present before calling ->setup().
Fixes: f646cf9452 ("USB device driver of Topcliff PCH")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210323153626.54908-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 91356fed6a ]
Either way ~0 will be in the correct byte order, hence
replace cpu_to_le32() by lower_32_bits(). Moreover,
it makes sparse happy, otherwise it complains:
.../pch_udc.c:1813:27: warning: incorrect type in assignment (different base types)
.../pch_udc.c:1813:27: expected unsigned int [usertype] dataptr
.../pch_udc.c:1813:27: got restricted __le32 [usertype]
Fixes: f646cf9452 ("USB device driver of Topcliff PCH")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210323153626.54908-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f2d90e07b5 ]
In case of error, the function device_get_named_child_node() returns
NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check
should be replaced with NULL test.
Fixes: da0cb63100 ("usb: typec: add support for STUSB160x Type-C controller family")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20210308094839.3586773-1-weiyongjun1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 604c75893a ]
In case of error, the function device_get_named_child_node() returns
NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check
should be replaced with NULL test.
Fixes: 18a6c866bb ("usb: typec: tps6598x: Add USB role switching logic")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20210308094841.3587751-1-weiyongjun1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 19c234a14e ]
While interpreting CC_STATUS, ROLE_CONTROL has to be read to make
sure that CC1/CC2 is not forced presenting Rp/Rd.
>From the TCPCI spec:
4.4.5.2 ROLE_CONTROL (Normative):
The TCPM shall write B6 (DRP) = 0b and B3..0 (CC1/CC2) if it wishes
to control the Rp/Rd directly instead of having the TCPC perform
DRP toggling autonomously. When controlling Rp/Rd directly, the
TCPM writes to B3..0 (CC1/CC2) each time it wishes to change the
CC1/CC2 values. This control is used for TCPM-TCPC implementing
Source or Sink only as well as when a connection has been detected
via DRP toggling but the TCPM wishes to attempt Try.Src or Try.Snk.
Table 4-22. CC_STATUS Register Definition:
If (ROLE_CONTROL.CC1 = Rd) or ConnectResult=1)
00b: SNK.Open (Below maximum vRa)
01b: SNK.Default (Above minimum vRd-Connect)
10b: SNK.Power1.5 (Above minimum vRd-Connect) Detects Rp-1.5A
11b: SNK.Power3.0 (Above minimum vRd-Connect) Detects Rp-3.0A
If (ROLE_CONTROL.CC2=Rd) or (ConnectResult=1)
00b: SNK.Open (Below maximum vRa)
01b: SNK.Default (Above minimum vRd-Connect)
10b: SNK.Power1.5 (Above minimum vRd-Connect) Detects Rp 1.5A
11b: SNK.Power3.0 (Above minimum vRd-Connect) Detects Rp 3.0A
Fixes: 74e656d6b0 ("staging: typec: Type-C Port Controller Interface driver (tcpci)")
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20210304070931.1947316-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 50a318cc9b upstream.
The commit d3cb25a121 ("usb: gadget: udc: fix spin_lock in pch_udc")
obviously was not thought through and had made the situation even worse
than it was before. Two changes after almost reverted it. but a few
leftovers have been left as it. With this revert d3cb25a121 completely.
While at it, narrow down the scope of unlocked section to prevent
potential race when prot_stall is assigned.
Fixes: d3cb25a121 ("usb: gadget: udc: fix spin_lock in pch_udc")
Fixes: 9903b6bedd ("usb: gadget: pch-udc: fix lock")
Fixes: 1d23d16a88 ("usb: gadget: pch_udc: reorder spin_[un]lock to avoid deadlock")
Cc: Iago Abal <mail@iagoabal.eu>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210323153626.54908-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e19ee44a3d upstream.
When the USB headset is plug into an external hub, sometimes
can't set config due to not enough bandwidth, so need improve
LS/FS INT/ISOC bandwidth scheduling with TT.
Fixes: 54f6a8af37 ("usb: xhci-mtk: skip dropping bandwidth of unchecked endpoints")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Yaqii Wu <yaqii.wu@mediatek.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/2f30e81400a59afef5f8231c98149169c7520519.1615170625.git.chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5fa5827566 upstream.
Side effect may happen if use or operator to set schedule parameters
when the parameters are already set before. Set them directly due to
other bits are reserved.
Fixes: 54f6a8af37 ("usb: xhci-mtk: skip dropping bandwidth of unchecked endpoints")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/d287899e6beb2fc1bfb8900c75a872f628ecde55.1615170625.git.chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4050f2683f upstream.
power_supply_changed needs to be called to notify clients
after the partner accepts the requested values for the pps
case.
Also, remove the redundant power_supply_changed at the end
of the tcpm_reset_port as power_supply_changed is already
called right after usb_type is changed.
Fixes: f2a8aa053c ("typec: tcpm: Represent source supply through power_supply")
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20210407200723.1914388-3-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e3a0720224 upstream.
tcpm_pd_select_pps_apdo overwrites port->pps_data.min_volt,
port->pps_data.max_volt, port->pps_data.max_curr even before
port partner accepts the requests. This leaves incorrect values
in current_limit and supply_voltage that get exported by
"tcpm-source-psy-". Solving this problem by caching the request
values in req_min_volt, req_max_volt, req_max_curr, req_out_volt,
req_op_curr. min_volt, max_volt, max_curr gets updated once the
partner accepts the request. current_limit, supply_voltage gets updated
once local port's tcpm enters SNK_TRANSITION_SINK when the accepted
current_limit and supply_voltage is enforced.
Fixes: f2a8aa053c ("typec: tcpm: Represent source supply through power_supply")
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20210407200723.1914388-2-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
