Changes in 5.10.20
vmlinux.lds.h: add DWARF v5 sections
vdpa/mlx5: fix param validation in mlx5_vdpa_get_config()
debugfs: be more robust at handling improper input in debugfs_lookup()
debugfs: do not attempt to create a new file before the filesystem is initalized
scsi: libsas: docs: Remove notify_ha_event()
scsi: qla2xxx: Fix mailbox Ch erroneous error
kdb: Make memory allocations more robust
w1: w1_therm: Fix conversion result for negative temperatures
PCI: qcom: Use PHY_REFCLK_USE_PAD only for ipq8064
PCI: Decline to resize resources if boot config must be preserved
virt: vbox: Do not use wait_event_interruptible when called from kernel context
bfq: Avoid false bfq queue merging
ALSA: usb-audio: Fix PCM buffer allocation in non-vmalloc mode
MIPS: vmlinux.lds.S: add missing PAGE_ALIGNED_DATA() section
vmlinux.lds.h: Define SANTIZER_DISCARDS with CONFIG_GCOV_KERNEL=y
random: fix the RNDRESEEDCRNG ioctl
ALSA: pcm: Call sync_stop at disconnection
ALSA: pcm: Assure sync with the pending stop operation at suspend
ALSA: pcm: Don't call sync_stop if it hasn't been stopped
drm/i915/gt: One more flush for Baytrail clear residuals
ath10k: Fix error handling in case of CE pipe init failure
Bluetooth: btqcomsmd: Fix a resource leak in error handling paths in the probe function
Bluetooth: hci_uart: Fix a race for write_work scheduling
Bluetooth: Fix initializing response id after clearing struct
arm64: dts: renesas: beacon kit: Fix choppy Bluetooth Audio
arm64: dts: renesas: beacon: Fix audio-1.8V pin enable
ARM: dts: exynos: correct PMIC interrupt trigger level on Artik 5
ARM: dts: exynos: correct PMIC interrupt trigger level on Monk
ARM: dts: exynos: correct PMIC interrupt trigger level on Rinato
ARM: dts: exynos: correct PMIC interrupt trigger level on Spring
ARM: dts: exynos: correct PMIC interrupt trigger level on Arndale Octa
ARM: dts: exynos: correct PMIC interrupt trigger level on Odroid XU3 family
arm64: dts: exynos: correct PMIC interrupt trigger level on TM2
arm64: dts: exynos: correct PMIC interrupt trigger level on Espresso
memory: mtk-smi: Fix PM usage counter unbalance in mtk_smi ops
Bluetooth: hci_qca: Fix memleak in qca_controller_memdump
staging: vchiq: Fix bulk userdata handling
staging: vchiq: Fix bulk transfers on 64-bit builds
arm64: dts: qcom: msm8916-samsung-a5u: Fix iris compatible
net: stmmac: dwmac-meson8b: fix enabling the timing-adjustment clock
bpf: Add bpf_patch_call_args prototype to include/linux/bpf.h
bpf: Avoid warning when re-casting __bpf_call_base into __bpf_call_base_args
firmware: arm_scmi: Fix call site of scmi_notification_exit
arm64: dts: allwinner: A64: properly connect USB PHY to port 0
arm64: dts: allwinner: H6: properly connect USB PHY to port 0
arm64: dts: allwinner: Drop non-removable from SoPine/LTS SD card
arm64: dts: allwinner: H6: Allow up to 150 MHz MMC bus frequency
arm64: dts: allwinner: A64: Limit MMC2 bus frequency to 150 MHz
arm64: dts: qcom: msm8916-samsung-a2015: Fix sensors
cpufreq: brcmstb-avs-cpufreq: Free resources in error path
cpufreq: brcmstb-avs-cpufreq: Fix resource leaks in ->remove()
arm64: dts: rockchip: rk3328: Add clock_in_out property to gmac2phy node
ACPICA: Fix exception code class checks
usb: gadget: u_audio: Free requests only after callback
arm64: dts: qcom: sdm845-db845c: Fix reset-pin of ov8856 node
soc: qcom: socinfo: Fix an off by one in qcom_show_pmic_model()
soc: ti: pm33xx: Fix some resource leak in the error handling paths of the probe function
staging: media: atomisp: Fix size_t format specifier in hmm_alloc() debug statemenet
Bluetooth: drop HCI device reference before return
Bluetooth: Put HCI device if inquiry procedure interrupts
memory: ti-aemif: Drop child node when jumping out loop
ARM: dts: Configure missing thermal interrupt for 4430
usb: dwc2: Do not update data length if it is 0 on inbound transfers
usb: dwc2: Abort transaction after errors with unknown reason
usb: dwc2: Make "trimming xfer length" a debug message
staging: rtl8723bs: wifi_regd.c: Fix incorrect number of regulatory rules
x86/MSR: Filter MSR writes through X86_IOC_WRMSR_REGS ioctl too
arm64: dts: renesas: beacon: Fix EEPROM compatible value
can: mcp251xfd: mcp251xfd_probe(): fix errata reference
ARM: dts: armada388-helios4: assign pinctrl to LEDs
ARM: dts: armada388-helios4: assign pinctrl to each fan
arm64: dts: armada-3720-turris-mox: rename u-boot mtd partition to a53-firmware
opp: Correct debug message in _opp_add_static_v2()
Bluetooth: btusb: Fix memory leak in btusb_mtk_wmt_recv
soc: qcom: ocmem: don't return NULL in of_get_ocmem
arm64: dts: msm8916: Fix reserved and rfsa nodes unit address
arm64: dts: meson: fix broken wifi node for Khadas VIM3L
iwlwifi: mvm: set enabled in the PPAG command properly
ARM: s3c: fix fiq for clang IAS
optee: simplify i2c access
staging: wfx: fix possible panic with re-queued frames
ARM: at91: use proper asm syntax in pm_suspend
ath10k: Fix suspicious RCU usage warning in ath10k_wmi_tlv_parse_peer_stats_info()
ath10k: Fix lockdep assertion warning in ath10k_sta_statistics
ath11k: fix a locking bug in ath11k_mac_op_start()
soc: aspeed: snoop: Add clock control logic
iwlwifi: mvm: fix the type we use in the PPAG table validity checks
iwlwifi: mvm: store PPAG enabled/disabled flag properly
iwlwifi: mvm: send stored PPAG command instead of local
iwlwifi: mvm: assign SAR table revision to the command later
iwlwifi: mvm: don't check if CSA event is running before removing
bpf_lru_list: Read double-checked variable once without lock
iwlwifi: pnvm: set the PNVM again if it was already loaded
iwlwifi: pnvm: increment the pointer before checking the TLV
ath9k: fix data bus crash when setting nf_override via debugfs
selftests/bpf: Convert test_xdp_redirect.sh to bash
ibmvnic: Set to CLOSED state even on error
bnxt_en: reverse order of TX disable and carrier off
bnxt_en: Fix devlink info's stored fw.psid version format.
xen/netback: fix spurious event detection for common event case
dpaa2-eth: fix memory leak in XDP_REDIRECT
net: phy: consider that suspend2ram may cut off PHY power
net/mlx5e: Don't change interrupt moderation params when DIM is enabled
net/mlx5e: Change interrupt moderation channel params also when channels are closed
net/mlx5: Fix health error state handling
net/mlx5e: Replace synchronize_rcu with synchronize_net
net/mlx5e: kTLS, Use refcounts to free kTLS RX priv context
net/mlx5: Disable devlink reload for multi port slave device
net/mlx5: Disallow RoCE on multi port slave device
net/mlx5: Disallow RoCE on lag device
net/mlx5: Disable devlink reload for lag devices
net/mlx5e: CT: manage the lifetime of the ct entry object
net/mlx5e: Check tunnel offload is required before setting SWP
mac80211: fix potential overflow when multiplying to u32 integers
libbpf: Ignore non function pointer member in struct_ops
bpf: Fix an unitialized value in bpf_iter
bpf, devmap: Use GFP_KERNEL for xdp bulk queue allocation
bpf: Fix bpf_fib_lookup helper MTU check for SKB ctx
selftests: mptcp: fix ACKRX debug message
tcp: fix SO_RCVLOWAT related hangs under mem pressure
net: axienet: Handle deferred probe on clock properly
cxgb4/chtls/cxgbit: Keeping the max ofld immediate data size same in cxgb4 and ulds
b43: N-PHY: Fix the update of coef for the PHY revision >= 3case
bpf: Clear subreg_def for global function return values
ibmvnic: add memory barrier to protect long term buffer
ibmvnic: skip send_request_unmap for timeout reset
net: dsa: felix: perform teardown in reverse order of setup
net: dsa: felix: don't deinitialize unused ports
net: phy: mscc: adding LCPLL reset to VSC8514
net: amd-xgbe: Reset the PHY rx data path when mailbox command timeout
net: amd-xgbe: Fix NETDEV WATCHDOG transmit queue timeout warning
net: amd-xgbe: Reset link when the link never comes back
net: amd-xgbe: Fix network fluctuations when using 1G BELFUSE SFP
net: mvneta: Remove per-cpu queue mapping for Armada 3700
net: enetc: fix destroyed phylink dereference during unbind
tty: convert tty_ldisc_ops 'read()' function to take a kernel pointer
tty: implement read_iter
fbdev: aty: SPARC64 requires FB_ATY_CT
drm/gma500: Fix error return code in psb_driver_load()
gma500: clean up error handling in init
drm/fb-helper: Add missed unlocks in setcmap_legacy()
drm/panel: mantix: Tweak init sequence
drm/vc4: hdmi: Take into account the clock doubling flag in atomic_check
crypto: sun4i-ss - linearize buffers content must be kept
crypto: sun4i-ss - fix kmap usage
crypto: arm64/aes-ce - really hide slower algos when faster ones are enabled
hwrng: ingenic - Fix a resource leak in an error handling path
media: allegro: Fix use after free on error
kcsan: Rewrite kcsan_prandom_u32_max() without prandom_u32_state()
drm: rcar-du: Fix PM reference leak in rcar_cmm_enable()
drm: rcar-du: Fix crash when using LVDS1 clock for CRTC
drm: rcar-du: Fix the return check of of_parse_phandle and of_find_device_by_node
drm/amdgpu: Fix macro name _AMDGPU_TRACE_H_ in preprocessor if condition
MIPS: c-r4k: Fix section mismatch for loongson2_sc_init
MIPS: lantiq: Explicitly compare LTQ_EBU_PCC_ISTAT against 0
drm/virtio: make sure context is created in gem open
drm/fourcc: fix Amlogic format modifier masks
media: ipu3-cio2: Build only for x86
media: i2c: ov5670: Fix PIXEL_RATE minimum value
media: imx: Unregister csc/scaler only if registered
media: imx: Fix csc/scaler unregister
media: mtk-vcodec: fix error return code in vdec_vp9_decode()
media: camss: missing error code in msm_video_register()
media: vsp1: Fix an error handling path in the probe function
media: em28xx: Fix use-after-free in em28xx_alloc_urbs
media: media/pci: Fix memleak in empress_init
media: tm6000: Fix memleak in tm6000_start_stream
media: aspeed: fix error return code in aspeed_video_setup_video()
ASoC: cs42l56: fix up error handling in probe
ASoC: qcom: qdsp6: Move frontend AIFs to q6asm-dai
evm: Fix memleak in init_desc
crypto: bcm - Rename struct device_private to bcm_device_private
sched/fair: Avoid stale CPU util_est value for schedutil in task dequeue
drm/sun4i: tcon: fix inverted DCLK polarity
media: imx7: csi: Fix regression for parallel cameras on i.MX6UL
media: imx7: csi: Fix pad link validation
media: ti-vpe: cal: fix write to unallocated memory
MIPS: properly stop .eh_frame generation
MIPS: Compare __SYNC_loongson3_war against 0
drm/tegra: Fix reference leak when pm_runtime_get_sync() fails
drm/amdgpu: toggle on DF Cstate after finishing xgmi injection
bsg: free the request before return error code
macintosh/adb-iop: Use big-endian autopoll mask
drm/amd/display: Fix 10/12 bpc setup in DCE output bit depth reduction.
drm/amd/display: Fix HDMI deep color output for DCE 6-11.
media: software_node: Fix refcounts in software_node_get_next_child()
media: lmedm04: Fix misuse of comma
media: vidtv: psi: fix missing crc for PMT
media: atomisp: Fix a buffer overflow in debug code
media: qm1d1c0042: fix error return code in qm1d1c0042_init()
media: cx25821: Fix a bug when reallocating some dma memory
media: mtk-vcodec: fix argument used when DEBUG is defined
media: pxa_camera: declare variable when DEBUG is defined
media: uvcvideo: Accept invalid bFormatIndex and bFrameIndex values
sched/eas: Don't update misfit status if the task is pinned
f2fs: compress: fix potential deadlock
ASoC: qcom: lpass-cpu: Remove bit clock state check
ASoC: SOF: Intel: hda: cancel D0i3 work during runtime suspend
perf/arm-cmn: Fix PMU instance naming
perf/arm-cmn: Move IRQs when migrating context
mtd: parser: imagetag: fix error codes in bcm963xx_parse_imagetag_partitions()
crypto: talitos - Work around SEC6 ERRATA (AES-CTR mode data size error)
crypto: talitos - Fix ctr(aes) on SEC1
drm/nouveau: bail out of nouveau_channel_new if channel init fails
mm: proc: Invalidate TLB after clearing soft-dirty page state
ata: ahci_brcm: Add back regulators management
ASoC: cpcap: fix microphone timeslot mask
ASoC: codecs: add missing max_register in regmap config
mtd: parsers: afs: Fix freeing the part name memory in failure
f2fs: fix to avoid inconsistent quota data
drm/amdgpu: Prevent shift wrapping in amdgpu_read_mask()
f2fs: fix a wrong condition in __submit_bio
ASoC: qcom: Fix typo error in HDMI regmap config callbacks
KVM: nSVM: Don't strip host's C-bit from guest's CR3 when reading PDPTRs
drm/mediatek: Check if fb is null
Drivers: hv: vmbus: Avoid use-after-free in vmbus_onoffer_rescind()
ASoC: Intel: sof_sdw: add missing TGL_HDMI quirk for Dell SKU 0A5E
ASoC: Intel: sof_sdw: add missing TGL_HDMI quirk for Dell SKU 0A3E
locking/lockdep: Avoid unmatched unlock
ASoC: qcom: lpass: Fix i2s ctl register bit map
ASoC: rt5682: Fix panic in rt5682_jack_detect_handler happening during system shutdown
ASoC: SOF: debug: Fix a potential issue on string buffer termination
btrfs: clarify error returns values in __load_free_space_cache
btrfs: fix double accounting of ordered extent for subpage case in btrfs_invalidapge
KVM: x86: Restore all 64 bits of DR6 and DR7 during RSM on x86-64
s390/zcrypt: return EIO when msg retry limit reached
drm/vc4: hdmi: Move hdmi reset to bind
drm/vc4: hdmi: Fix register offset with longer CEC messages
drm/vc4: hdmi: Fix up CEC registers
drm/vc4: hdmi: Restore cec physical address on reconnect
drm/vc4: hdmi: Compute the CEC clock divider from the clock rate
drm/vc4: hdmi: Update the CEC clock divider on HSM rate change
drm/lima: fix reference leak in lima_pm_busy
drm/dp_mst: Don't cache EDIDs for physical ports
hwrng: timeriomem - Fix cooldown period calculation
crypto: ecdh_helper - Ensure 'len >= secret.len' in decode_key()
io_uring: fix possible deadlock in io_uring_poll
nvmet-tcp: fix receive data digest calculation for multiple h2cdata PDUs
nvmet-tcp: fix potential race of tcp socket closing accept_work
nvme-multipath: set nr_zones for zoned namespaces
nvmet: remove extra variable in identify ns
nvmet: set status to 0 in case for invalid nsid
ASoC: SOF: sof-pci-dev: add missing Up-Extreme quirk
ima: Free IMA measurement buffer on error
ima: Free IMA measurement buffer after kexec syscall
ASoC: simple-card-utils: Fix device module clock
fs/jfs: fix potential integer overflow on shift of a int
jffs2: fix use after free in jffs2_sum_write_data()
ubifs: Fix memleak in ubifs_init_authentication
ubifs: replay: Fix high stack usage, again
ubifs: Fix error return code in alloc_wbufs()
irqchip/imx: IMX_INTMUX should not default to y, unconditionally
smp: Process pending softirqs in flush_smp_call_function_from_idle()
drm/amdgpu/display: remove hdcp_srm sysfs on device removal
capabilities: Don't allow writing ambiguous v3 file capabilities
HSI: Fix PM usage counter unbalance in ssi_hw_init
power: supply: cpcap: Add missing IRQF_ONESHOT to fix regression
clk: meson: clk-pll: fix initializing the old rate (fallback) for a PLL
clk: meson: clk-pll: make "ret" a signed integer
clk: meson: clk-pll: propagate the error from meson_clk_pll_set_rate()
selftests/powerpc: Make the test check in eeh-basic.sh posix compliant
regulator: qcom-rpmh-regulator: add pm8009-1 chip revision
arm64: dts: qcom: qrb5165-rb5: fix pm8009 regulators
quota: Fix memory leak when handling corrupted quota file
i2c: iproc: handle only slave interrupts which are enabled
i2c: iproc: update slave isr mask (ISR_MASK_SLAVE)
i2c: iproc: handle master read request
spi: cadence-quadspi: Abort read if dummy cycles required are too many
clk: sunxi-ng: h6: Fix CEC clock
clk: renesas: r8a779a0: Remove non-existent S2 clock
clk: renesas: r8a779a0: Fix parent of CBFUSA clock
HID: core: detect and skip invalid inputs to snto32()
RDMA/siw: Fix handling of zero-sized Read and Receive Queues.
dmaengine: fsldma: Fix a resource leak in the remove function
dmaengine: fsldma: Fix a resource leak in an error handling path of the probe function
dmaengine: owl-dma: Fix a resource leak in the remove function
dmaengine: hsu: disable spurious interrupt
mfd: bd9571mwv: Use devm_mfd_add_devices()
power: supply: cpcap-charger: Fix missing power_supply_put()
power: supply: cpcap-battery: Fix missing power_supply_put()
power: supply: cpcap-charger: Fix power_supply_put on null battery pointer
fdt: Properly handle "no-map" field in the memory region
of/fdt: Make sure no-map does not remove already reserved regions
RDMA/rtrs: Extend ibtrs_cq_qp_create
RDMA/rtrs-srv: Release lock before call into close_sess
RDMA/rtrs-srv: Use sysfs_remove_file_self for disconnect
RDMA/rtrs-clt: Set mininum limit when create QP
RDMA/rtrs: Call kobject_put in the failure path
RDMA/rtrs-srv: Fix missing wr_cqe
RDMA/rtrs-clt: Refactor the failure cases in alloc_clt
RDMA/rtrs-srv: Init wr_cnt as 1
power: reset: at91-sama5d2_shdwc: fix wkupdbc mask
rtc: s5m: select REGMAP_I2C
dmaengine: idxd: set DMA channel to be private
power: supply: fix sbs-charger build, needs REGMAP_I2C
clocksource/drivers/ixp4xx: Select TIMER_OF when needed
clocksource/drivers/mxs_timer: Add missing semicolon when DEBUG is defined
spi: imx: Don't print error on -EPROBEDEFER
RDMA/mlx5: Use the correct obj_id upon DEVX TIR creation
IB/mlx5: Add mutex destroy call to cap_mask_mutex mutex
clk: sunxi-ng: h6: Fix clock divider range on some clocks
platform/chrome: cros_ec_proto: Use EC_HOST_EVENT_MASK not BIT
platform/chrome: cros_ec_proto: Add LID and BATTERY to default mask
regulator: axp20x: Fix reference cout leak
watch_queue: Drop references to /dev/watch_queue
certs: Fix blacklist flag type confusion
regulator: s5m8767: Fix reference count leak
spi: atmel: Put allocated master before return
regulator: s5m8767: Drop regulators OF node reference
power: supply: axp20x_usb_power: Init work before enabling IRQs
power: supply: smb347-charger: Fix interrupt usage if interrupt is unavailable
regulator: core: Avoid debugfs: Directory ... already present! error
isofs: release buffer head before return
watchdog: intel-mid_wdt: Postpone IRQ handler registration till SCU is ready
auxdisplay: ht16k33: Fix refresh rate handling
objtool: Fix error handling for STD/CLD warnings
objtool: Fix retpoline detection in asm code
objtool: Fix ".cold" section suffix check for newer versions of GCC
scsi: lpfc: Fix ancient double free
iommu: Switch gather->end to the inclusive end
IB/umad: Return EIO in case of when device disassociated
IB/umad: Return EPOLLERR in case of when device disassociated
KVM: PPC: Make the VMX instruction emulation routines static
powerpc/47x: Disable 256k page size
powerpc/time: Enable sched clock for irqtime
mmc: owl-mmc: Fix a resource leak in an error handling path and in the remove function
mmc: sdhci-sprd: Fix some resource leaks in the remove function
mmc: usdhi6rol0: Fix a resource leak in the error handling path of the probe
mmc: renesas_sdhi_internal_dmac: Fix DMA buffer alignment from 8 to 128-bytes
ARM: 9046/1: decompressor: Do not clear SCTLR.nTLSMD for ARMv7+ cores
i2c: qcom-geni: Store DMA mapping data in geni_i2c_dev struct
amba: Fix resource leak for drivers without .remove
iommu: Move iotlb_sync_map out from __iommu_map
iommu: Properly pass gfp_t in _iommu_map() to avoid atomic sleeping
IB/mlx5: Return appropriate error code instead of ENOMEM
IB/cm: Avoid a loop when device has 255 ports
tracepoint: Do not fail unregistering a probe due to memory failure
rtc: zynqmp: depend on HAS_IOMEM
perf tools: Fix DSO filtering when not finding a map for a sampled address
perf vendor events arm64: Fix Ampere eMag event typo
RDMA/rxe: Fix coding error in rxe_recv.c
RDMA/rxe: Fix coding error in rxe_rcv_mcast_pkt
RDMA/rxe: Correct skb on loopback path
spi: stm32: properly handle 0 byte transfer
mfd: altera-sysmgr: Fix physical address storing more
mfd: wm831x-auxadc: Prevent use after free in wm831x_auxadc_read_irq()
powerpc/pseries/dlpar: handle ibm, configure-connector delay status
powerpc/8xx: Fix software emulation interrupt
clk: qcom: gcc-msm8998: Fix Alpha PLL type for all GPLLs
kunit: tool: fix unit test cleanup handling
kselftests: dmabuf-heaps: Fix Makefile's inclusion of the kernel's usr/include dir
RDMA/hns: Fixed wrong judgments in the goto branch
RDMA/siw: Fix calculation of tx_valid_cpus size
RDMA/hns: Fix type of sq_signal_bits
RDMA/hns: Disable RQ inline by default
clk: divider: fix initialization with parent_hw
spi: pxa2xx: Fix the controller numbering for Wildcat Point
powerpc/uaccess: Avoid might_fault() when user access is enabled
powerpc/kuap: Restore AMR after replaying soft interrupts
regulator: qcom-rpmh: fix pm8009 ldo7
clk: aspeed: Fix APLL calculate formula from ast2600-A2
selftests/ftrace: Update synthetic event syntax errors
perf symbols: Use (long) for iterator for bfd symbols
regulator: bd718x7, bd71828, Fix dvs voltage levels
spi: dw: Avoid stack content exposure
spi: Skip zero-length transfers in spi_transfer_one_message()
printk: avoid prb_first_valid_seq() where possible
perf symbols: Fix return value when loading PE DSO
nfsd: register pernet ops last, unregister first
svcrdma: Hold private mutex while invoking rdma_accept()
ceph: fix flush_snap logic after putting caps
RDMA/hns: Fixes missing error code of CMDQ
RDMA/ucma: Fix use-after-free bug in ucma_create_uevent
RDMA/rtrs-srv: Fix stack-out-of-bounds
RDMA/rtrs: Only allow addition of path to an already established session
RDMA/rtrs-srv: fix memory leak by missing kobject free
RDMA/rtrs-srv-sysfs: fix missing put_device
RDMA/rtrs-srv: Do not pass a valid pointer to PTR_ERR()
Input: sur40 - fix an error code in sur40_probe()
perf record: Fix continue profiling after draining the buffer
perf intel-pt: Fix missing CYC processing in PSB
perf intel-pt: Fix premature IPC
perf intel-pt: Fix IPC with CYC threshold
perf test: Fix unaligned access in sample parsing test
Input: elo - fix an error code in elo_connect()
sparc64: only select COMPAT_BINFMT_ELF if BINFMT_ELF is set
sparc: fix led.c driver when PROC_FS is not enabled
Input: zinitix - fix return type of zinitix_init_touch()
ARM: 9065/1: OABI compat: fix build when EPOLL is not enabled
misc: eeprom_93xx46: Fix module alias to enable module autoprobe
phy: rockchip-emmc: emmc_phy_init() always return 0
phy: cadence-torrent: Fix error code in cdns_torrent_phy_probe()
misc: eeprom_93xx46: Add module alias to avoid breaking support for non device tree users
PCI: rcar: Always allocate MSI addresses in 32bit space
soundwire: cadence: fix ACK/NAK handling
pwm: rockchip: Enable APB clock during register access while probing
pwm: rockchip: rockchip_pwm_probe(): Remove superfluous clk_unprepare()
pwm: rockchip: Eliminate potential race condition when probing
PCI: xilinx-cpm: Fix reference count leak on error path
VMCI: Use set_page_dirty_lock() when unregistering guest memory
PCI: Align checking of syscall user config accessors
mei: hbm: call mei_set_devstate() on hbm stop response
drm/msm: Fix MSM_INFO_GET_IOVA with carveout
drm/msm/dsi: Correct io_start for MSM8994 (20nm PHY)
drm/msm/mdp5: Fix wait-for-commit for cmd panels
drm/msm: Fix race of GPU init vs timestamp power management.
drm/msm: Fix races managing the OOB state for timestamp vs timestamps.
drm/msm/dp: trigger unplug event in msm_dp_display_disable
vfio/iommu_type1: Populate full dirty when detach non-pinned group
vfio/iommu_type1: Fix some sanity checks in detach group
vfio-pci/zdev: fix possible segmentation fault issue
ext4: fix potential htree index checksum corruption
phy: USB_LGM_PHY should depend on X86
coresight: etm4x: Skip accessing TRCPDCR in save/restore
nvmem: core: Fix a resource leak on error in nvmem_add_cells_from_of()
nvmem: core: skip child nodes not matching binding
soundwire: bus: use sdw_update_no_pm when initializing a device
soundwire: bus: use sdw_write_no_pm when setting the bus scale registers
soundwire: export sdw_write/read_no_pm functions
soundwire: bus: fix confusion on device used by pm_runtime
misc: fastrpc: fix incorrect usage of dma_map_sgtable
remoteproc/mediatek: acknowledge watchdog IRQ after handled
regmap: sdw: use _no_pm functions in regmap_read/write
ext: EXT4_KUNIT_TESTS should depend on EXT4_FS instead of selecting it
mailbox: sprd: correct definition of SPRD_OUTBOX_FIFO_FULL
device-dax: Fix default return code of range_parse()
PCI: pci-bridge-emul: Fix array overruns, improve safety
PCI: cadence: Fix DMA range mapping early return error
i40e: Fix flow for IPv6 next header (extension header)
i40e: Add zero-initialization of AQ command structures
i40e: Fix overwriting flow control settings during driver loading
i40e: Fix addition of RX filters after enabling FW LLDP agent
i40e: Fix VFs not created
Take mmap lock in cacheflush syscall
nios2: fixed broken sys_clone syscall
i40e: Fix add TC filter for IPv6
octeontx2-af: Fix an off by one in rvu_dbg_qsize_write()
pwm: iqs620a: Fix overflow and optimize calculations
vfio/type1: Use follow_pte()
ice: report correct max number of TCs
ice: Account for port VLAN in VF max packet size calculation
ice: Fix state bits on LLDP mode switch
ice: update the number of available RSS queues
net: stmmac: fix CBS idleslope and sendslope calculation
net/mlx4_core: Add missed mlx4_free_cmd_mailbox()
PCI: rockchip: Make 'ep-gpios' DT property optional
vxlan: move debug check after netdev unregister
wireguard: device: do not generate ICMP for non-IP packets
wireguard: kconfig: use arm chacha even with no neon
ocfs2: fix a use after free on error
mm: memcontrol: fix NR_ANON_THPS accounting in charge moving
mm: memcontrol: fix slub memory accounting
mm/memory.c: fix potential pte_unmap_unlock pte error
mm/hugetlb: fix potential double free in hugetlb_register_node() error path
mm/hugetlb: suppress wrong warning info when alloc gigantic page
mm/compaction: fix misbehaviors of fast_find_migrateblock()
r8169: fix jumbo packet handling on RTL8168e
NFSv4: Fixes for nfs4_bitmask_adjust()
KVM: SVM: Intercept INVPCID when it's disabled to inject #UD
KVM: x86/mmu: Expand collapsible SPTE zap for TDP MMU to ZONE_DEVICE and HugeTLB pages
arm64: Add missing ISB after invalidating TLB in __primary_switch
i2c: brcmstb: Fix brcmstd_send_i2c_cmd condition
i2c: exynos5: Preserve high speed master code
mm,thp,shmem: make khugepaged obey tmpfs mount flags
mm: fix memory_failure() handling of dax-namespace metadata
mm/rmap: fix potential pte_unmap on an not mapped pte
proc: use kvzalloc for our kernel buffer
csky: Fix a size determination in gpr_get()
scsi: bnx2fc: Fix Kconfig warning & CNIC build errors
scsi: sd: sd_zbc: Don't pass GFP_NOIO to kvcalloc
block: reopen the device in blkdev_reread_part
ide/falconide: Fix module unload
scsi: sd: Fix Opal support
blk-settings: align max_sectors on "logical_block_size" boundary
soundwire: intel: fix possible crash when no device is detected
ACPI: property: Fix fwnode string properties matching
ACPI: configfs: add missing check after configfs_register_default_group()
cpufreq: ACPI: Set cpuinfo.max_freq directly if max boost is known
HID: logitech-dj: add support for keyboard events in eQUAD step 4 Gaming
HID: wacom: Ignore attempts to overwrite the touch_max value from HID
Input: raydium_ts_i2c - do not send zero length
Input: xpad - add support for PowerA Enhanced Wired Controller for Xbox Series X|S
Input: joydev - prevent potential read overflow in ioctl
Input: i8042 - add ASUS Zenbook Flip to noselftest list
media: mceusb: Fix potential out-of-bounds shift
USB: serial: option: update interface mapping for ZTE P685M
usb: musb: Fix runtime PM race in musb_queue_resume_work
usb: dwc3: gadget: Fix setting of DEPCFG.bInterval_m1
usb: dwc3: gadget: Fix dep->interval for fullspeed interrupt
USB: serial: ftdi_sio: fix FTX sub-integer prescaler
USB: serial: pl2303: fix line-speed handling on newer chips
USB: serial: mos7840: fix error code in mos7840_write()
USB: serial: mos7720: fix error code in mos7720_write()
phy: lantiq: rcu-usb2: wait after clock enable
ALSA: fireface: fix to parse sync status register of latter protocol
ALSA: hda: Add another CometLake-H PCI ID
ALSA: hda/hdmi: Drop bogus check at closing a stream
ALSA: hda/realtek: modify EAPD in the ALC886
ALSA: hda/realtek: Quirk for HP Spectre x360 14 amp setup
MIPS: Ingenic: Disable HPTLB for D0 XBurst CPUs too
MIPS: Support binutils configured with --enable-mips-fix-loongson3-llsc=yes
MIPS: VDSO: Use CLANG_FLAGS instead of filtering out '--target='
Revert "MIPS: Octeon: Remove special handling of CONFIG_MIPS_ELF_APPENDED_DTB=y"
Revert "bcache: Kill btree_io_wq"
bcache: Give btree_io_wq correct semantics again
bcache: Move journal work to new flush wq
Revert "drm/amd/display: Update NV1x SR latency values"
drm/amd/display: Add FPU wrappers to dcn21_validate_bandwidth()
drm/amd/display: Remove Assert from dcn10_get_dig_frontend
drm/amd/display: Add vupdate_no_lock interrupts for DCN2.1
drm/amdkfd: Fix recursive lock warnings
drm/amdgpu: Set reference clock to 100Mhz on Renoir (v2)
drm/nouveau/kms: handle mDP connectors
drm/modes: Switch to 64bit maths to avoid integer overflow
drm/sched: Cancel and flush all outstanding jobs before finish.
drm/panel: kd35t133: allow using non-continuous dsi clock
drm/rockchip: Require the YTR modifier for AFBC
ASoC: siu: Fix build error by a wrong const prefix
selinux: fix inconsistency between inode_getxattr and inode_listsecurity
erofs: initialized fields can only be observed after bit is set
tpm_tis: Fix check_locality for correct locality acquisition
tpm_tis: Clean up locality release
KEYS: trusted: Fix incorrect handling of tpm_get_random()
KEYS: trusted: Fix migratable=1 failing
KEYS: trusted: Reserve TPM for seal and unseal operations
btrfs: do not cleanup upper nodes in btrfs_backref_cleanup_node
btrfs: do not warn if we can't find the reloc root when looking up backref
btrfs: add asserts for deleting backref cache nodes
btrfs: abort the transaction if we fail to inc ref in btrfs_copy_root
btrfs: fix reloc root leak with 0 ref reloc roots on recovery
btrfs: splice remaining dirty_bg's onto the transaction dirty bg list
btrfs: handle space_info::total_bytes_pinned inside the delayed ref itself
btrfs: account for new extents being deleted in total_bytes_pinned
btrfs: fix extent buffer leak on failure to copy root
drm/i915/gt: Flush before changing register state
drm/i915/gt: Correct surface base address for renderclear
crypto: arm64/sha - add missing module aliases
crypto: aesni - prevent misaligned buffers on the stack
crypto: michael_mic - fix broken misalignment handling
crypto: sun4i-ss - checking sg length is not sufficient
crypto: sun4i-ss - IV register does not work on A10 and A13
crypto: sun4i-ss - handle BigEndian for cipher
crypto: sun4i-ss - initialize need_fallback
soc: samsung: exynos-asv: don't defer early on not-supported SoCs
soc: samsung: exynos-asv: handle reading revision register error
seccomp: Add missing return in non-void function
arm64: ptrace: Fix seccomp of traced syscall -1 (NO_SYSCALL)
misc: rtsx: init of rts522a add OCP power off when no card is present
drivers/misc/vmw_vmci: restrict too big queue size in qp_host_alloc_queue
pstore: Fix typo in compression option name
dts64: mt7622: fix slow sd card access
arm64: dts: agilex: fix phy interface bit shift for gmac1 and gmac2
staging/mt7621-dma: mtk-hsdma.c->hsdma-mt7621.c
staging: gdm724x: Fix DMA from stack
staging: rtl8188eu: Add Edimax EW-7811UN V2 to device table
floppy: reintroduce O_NDELAY fix
media: i2c: max9286: fix access to unallocated memory
media: ir_toy: add another IR Droid device
media: ipu3-cio2: Fix mbus_code processing in cio2_subdev_set_fmt()
media: marvell-ccic: power up the device on mclk enable
media: smipcie: fix interrupt handling and IR timeout
x86/virt: Eat faults on VMXOFF in reboot flows
x86/reboot: Force all cpus to exit VMX root if VMX is supported
x86/fault: Fix AMD erratum #91 errata fixup for user code
x86/entry: Fix instrumentation annotation
powerpc/prom: Fix "ibm,arch-vec-5-platform-support" scan
rcu: Pull deferred rcuog wake up to rcu_eqs_enter() callers
rcu/nocb: Perform deferred wake up before last idle's need_resched() check
kprobes: Fix to delay the kprobes jump optimization
arm64: Extend workaround for erratum 1024718 to all versions of Cortex-A55
iommu/arm-smmu-qcom: Fix mask extraction for bootloader programmed SMRs
arm64: kexec_file: fix memory leakage in create_dtb() when fdt_open_into() fails
arm64: uprobe: Return EOPNOTSUPP for AARCH32 instruction probing
arm64 module: set plt* section addresses to 0x0
arm64: spectre: Prevent lockdep splat on v4 mitigation enable path
riscv: Disable KSAN_SANITIZE for vDSO
watchdog: qcom: Remove incorrect usage of QCOM_WDT_ENABLE_IRQ
watchdog: mei_wdt: request stop on unregister
coresight: etm4x: Handle accesses to TRCSTALLCTLR
mtd: spi-nor: sfdp: Fix last erase region marking
mtd: spi-nor: sfdp: Fix wrong erase type bitmask for overlaid region
mtd: spi-nor: core: Fix erase type discovery for overlaid region
mtd: spi-nor: core: Add erase size check for erase command initialization
mtd: spi-nor: hisi-sfc: Put child node np on error path
fs/affs: release old buffer head on error path
seq_file: document how per-entry resources are managed.
x86: fix seq_file iteration for pat/memtype.c
mm: memcontrol: fix swap undercounting in cgroup2
mm: memcontrol: fix get_active_memcg return value
hugetlb: fix update_and_free_page contig page struct assumption
hugetlb: fix copy_huge_page_from_user contig page struct assumption
mm/vmscan: restore zone_reclaim_mode ABI
mm, compaction: make fast_isolate_freepages() stay within zone
KVM: nSVM: fix running nested guests when npt=0
nvmem: qcom-spmi-sdam: Fix uninitialized pdev pointer
module: Ignore _GLOBAL_OFFSET_TABLE_ when warning for undefined symbols
mmc: sdhci-esdhc-imx: fix kernel panic when remove module
mmc: sdhci-pci-o2micro: Bug fix for SDR104 HW tuning failure
powerpc/32: Preserve cr1 in exception prolog stack check to fix build error
powerpc/kexec_file: fix FDT size estimation for kdump kernel
powerpc/32s: Add missing call to kuep_lock on syscall entry
spmi: spmi-pmic-arb: Fix hw_irq overflow
mei: fix transfer over dma with extended header
mei: me: emmitsburg workstation DID
mei: me: add adler lake point S DID
mei: me: add adler lake point LP DID
gpio: pcf857x: Fix missing first interrupt
mfd: gateworks-gsc: Fix interrupt type
printk: fix deadlock when kernel panic
exfat: fix shift-out-of-bounds in exfat_fill_super()
zonefs: Fix file size of zones in full condition
kcmp: Support selection of SYS_kcmp without CHECKPOINT_RESTORE
thermal: cpufreq_cooling: freq_qos_update_request() returns < 0 on error
cpufreq: qcom-hw: drop devm_xxx() calls from init/exit hooks
cpufreq: intel_pstate: Change intel_pstate_get_hwp_max() argument
cpufreq: intel_pstate: Get per-CPU max freq via MSR_HWP_CAPABILITIES if available
proc: don't allow async path resolution of /proc/thread-self components
s390/vtime: fix inline assembly clobber list
virtio/s390: implement virtio-ccw revision 2 correctly
um: mm: check more comprehensively for stub changes
um: defer killing userspace on page table update failures
irqchip/loongson-pch-msi: Use bitmap_zalloc() to allocate bitmap
f2fs: fix out-of-repair __setattr_copy()
f2fs: enforce the immutable flag on open files
f2fs: flush data when enabling checkpoint back
sparc32: fix a user-triggerable oops in clear_user()
spi: fsl: invert spisel_boot signal on MPC8309
spi: spi-synquacer: fix set_cs handling
gfs2: fix glock confusion in function signal_our_withdraw
gfs2: Don't skip dlm unlock if glock has an lvb
gfs2: Lock imbalance on error path in gfs2_recover_one
gfs2: Recursive gfs2_quota_hold in gfs2_iomap_end
dm: fix deadlock when swapping to encrypted device
dm table: fix iterate_devices based device capability checks
dm table: fix DAX iterate_devices based device capability checks
dm table: fix zoned iterate_devices based device capability checks
dm writecache: fix performance degradation in ssd mode
dm writecache: return the exact table values that were set
dm writecache: fix writing beyond end of underlying device when shrinking
dm era: Recover committed writeset after crash
dm era: Update in-core bitset after committing the metadata
dm era: Verify the data block size hasn't changed
dm era: Fix bitset memory leaks
dm era: Use correct value size in equality function of writeset tree
dm era: Reinitialize bitset cache before digesting a new writeset
dm era: only resize metadata in preresume
drm/i915: Reject 446-480MHz HDMI clock on GLK
kgdb: fix to kill breakpoints on initmem after boot
ipv6: silence compilation warning for non-IPV6 builds
net: icmp: pass zeroed opts from icmp{,v6}_ndo_send before sending
wireguard: selftests: test multiple parallel streams
wireguard: queueing: get rid of per-peer ring buffers
net: sched: fix police ext initialization
net: qrtr: Fix memory leak in qrtr_tun_open
net_sched: fix RTNL deadlock again caused by request_module()
ARM: dts: aspeed: Add LCLK to lpc-snoop
Linux 5.10.20
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I3fbcecd9413ce212dac68d5cc800c9457feba56a
[ Upstream commit de5d7adb89 ]
Consider an amba driver with a .probe but without a .remove callback (e.g.
pl061_gpio_driver). The function amba_probe() is called to bind a device
and so dev_pm_domain_attach() and others are called. As there is no remove
callback amba_remove() isn't called at unbind time however and so calling
dev_pm_domain_detach() is missed and the pm domain keeps active.
To fix this always use the core driver callbacks and handle missing amba
callbacks there. For probe refuse registration as a driver without probe
doesn't make sense.
Fixes: 7cfe249475 ("ARM: AMBA: Add pclk support to AMBA bus infrastructure")
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210126165835.687514-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
All amba drivers return 0 in their remove callback. Together with the
driver core ignoring the return value anyhow, it doesn't make sense to
return a value here.
Change the remove prototype to return void, which makes it explicit that
returning an error value doesn't work as expected. This simplifies changing
the core remove callback to return void, too.
Bug: 174685394
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org> # for drivers/memory
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> # for hwtracing/coresight
Acked-By: Vinod Koul <vkoul@kernel.org> # for dmaengine
Acked-by: Guenter Roeck <linux@roeck-us.net> # for watchdog
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Takashi Iwai <tiwai@suse.de> # for sound
Acked-by: Vladimir Zapolskiy <vz@mleia.com> # for memory/pl172
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210126165835.687514-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
(cherry picked from commit 3fd269e74f)
[Fixed conflicts in:
- drivers/amba/bus.c
- drivers/vfio/platform/vfio_amba.c
by just removing the return value keeping the code as-is in android]
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Change-Id: Ia0ddc88b7d47bb94ae34a168b48c08eb7f95f7e4
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
One new platform gets added, the Realtek RTD1195, which is an older
Cortex-a7 based relative of the RTD12xx chips that are already supported
in arch/arm64. The platform may also be extended to support running
32-bit kernels on those 64-bit chips for memory-constrained machines.
In the Renesas shmobile platform, we gain support for "RZ/G1H" or R8A7742,
an eight-core chip based on Cortex-A15 and Cortex-A7 cores, originally
released in 2016 as one of the last high-end 32-bit designs.
There is ongoing cleanup for the integrator, tegra, imx, and omap2
platforms, with integrator getting very close to the goal of having
zero code in arch/arm/, and omap2 moving more of the chip specifics
from old board code into device tree files.
The Versatile Express platform is made more modular, with built-in
drivers now becoming loadable modules. This is part of a greater effort
for the Android OS to have a common kernel binary for all platforms and
any platform specific code in loadable modules.
The PXA platform drops support for Compulab's pxa2xx boards that had
rather unusual flash and PCI drivers but no known users remaining.
All device drivers specific to those boards can now get removed as
well.
Across platforms, there is ongoing cleanup, with Geert and Rob
revisiting some a lot of Kconfig options.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=gzCp
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"One new platform gets added, the Realtek RTD1195, which is an older
Cortex-a7 based relative of the RTD12xx chips that are already
supported in arch/arm64. The platform may also be extended to support
running 32-bit kernels on those 64-bit chips for memory-constrained
machines.
In the Renesas shmobile platform, we gain support for "RZ/G1H" or
R8A7742, an eight-core chip based on Cortex-A15 and Cortex-A7 cores,
originally released in 2016 as one of the last high-end 32-bit
designs.
There is ongoing cleanup for the integrator, tegra, imx, and omap2
platforms, with integrator getting very close to the goal of having
zero code in arch/arm/, and omap2 moving more of the chip specifics
from old board code into device tree files.
The Versatile Express platform is made more modular, with built-in
drivers now becoming loadable modules. This is part of a greater
effort for the Android OS to have a common kernel binary for all
platforms and any platform specific code in loadable modules.
The PXA platform drops support for Compulab's pxa2xx boards that had
rather unusual flash and PCI drivers but no known users remaining. All
device drivers specific to those boards can now get removed as well.
Across platforms, there is ongoing cleanup, with Geert and Rob
revisiting some a lot of Kconfig options"
* tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits)
ARM: omap2: fix omap5_realtime_timer_init definition
ARM: zynq: Don't select CONFIG_ICST
ARM: OMAP2+: Fix regression for using local timer on non-SMP SoCs
clk: versatile: Fix kconfig dependency on COMMON_CLK_VERSATILE
ARM: davinci: fix build failure without I2C
power: reset: vexpress: fix build issue
power: vexpress: cleanup: use builtin_platform_driver
power: vexpress: add suppress_bind_attrs to true
Revert "ARM: vexpress: Don't select VEXPRESS_CONFIG"
MAINTAINERS: pxa: remove Compulab arm/pxa support
ARM: pxa: remove Compulab pxa2xx boards
bus: arm-integrator-lm: Fix return value check in integrator_ap_lm_probe()
soc: imx: move cpu code to drivers/soc/imx
ARM: imx: move cpu definitions into a header
ARM: imx: use device_initcall for imx_soc_device_init
ARM: imx: pcm037: make pcm970_sja1000_platform_data static
bus: ti-sysc: Timers no longer need legacy quirk handling
ARM: OMAP2+: Drop old timer code for dmtimer and 32k counter
ARM: dts: Configure system timers for omap2
ARM: dts: Configure system timers for ti81xx
...
If amba bus devices defer when adding, the amba bus code simply retries
adding the devices every 5 seconds. This doesn't work well as it
completely unsynchronized with starting the init process which can
happen in less than 5 secs. Add a retry during late_initcall. If the
amba devices are added, then deferred probe takes over. If the
dependencies have not probed at this point, then there's no improvement
over previous behavior. To completely solve this, we'd need to retry
after every successful probe as deferred probe does.
The list_empty() check now happens outside the mutex, but the mutex
wasn't necessary in the first place.
This needed to use deferred probe instead of fragile initcall ordering
on 32-bit VExpress systems where the apb_pclk has a number of probe
dependencies (vexpress-sysregs, vexpress-config).
Cc: John Stultz <john.stultz@linaro.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Russell King <linux@armlinux.org.uk>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
It's currently the amba driver's responsibility to initialize the pointer,
dma_parms, for its corresponding struct device. The benefit with this
approach allows us to avoid the initialization and to not waste memory for
the struct device_dma_parameters, as this can be decided on a case by case
basis.
However, it has turned out that this approach is not very practical. Not
only does it lead to open coding, but also to real errors. In principle
callers of dma_set_max_seg_size() doesn't check the error code, but just
assumes it succeeds.
For these reasons, let's do the initialization from the common amba bus at
the device registration point. This also follows the way the PCI devices
are being managed, see pci_device_add().
Suggested-by: Christoph Hellwig <hch@lst.de>
Cc: Russell King <linux@armlinux.org.uk>
Cc: <stable@vger.kernel.org>
Tested-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20200422101013.31267-1-ulf.hansson@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- fix for alignment faults under high memory pressure
- use u32 for ARM instructions in fault handler
- mark functions that must always be inlined with __always_inline
- fix for nommu XIP
- fix ARMv7M switch to handler mode in reboot path
- fix the recently introduced AMBA reset control error paths
-----BEGIN PGP SIGNATURE-----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=EBH5
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
:Pull ARM fixes from Russell King:
- fix for alignment faults under high memory pressure
- use u32 for ARM instructions in fault handler
- mark functions that must always be inlined with __always_inline
- fix for nommu XIP
- fix ARMv7M switch to handler mode in reboot path
- fix the recently introduced AMBA reset control error paths
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8926/1: v7m: remove register save to stack before svc
ARM: 8914/1: NOMMU: Fix exc_ret for XIP
ARM: 8908/1: add __always_inline to functions called from __get_user_check()
ARM: mm: alignment: use "u32" for 32-bit instructions
ARM: mm: fix alignment handler faults under memory pressure
drivers/amba: fix reset control error handling
With commit 79bdcb202a ("ARM: 8906/1: drivers/amba: add reset control
to amba bus probe") it is possible for the the amba bus driver to defer
probing the device for its IDs because the reset driver may be probed
later.
However when a subsequent probe occurs, the call to request_resource()
in the driver returns -EBUSY as the driver has not released the resource
from the initial probe attempt - or cleaned up any of the preceding
actions.
Fix this both for the deferred probe case as well as a failure to get
the reset.
Fixes: 79bdcb202a ("ARM: 8906/1: drivers/amba: add reset control to amba bus probe")
Reported-by: Dinh Nguyen <dinguyen@kernel.org>
Tested-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
- fix various clang build and cppcheck issues
- switch ARM to use new common outgoing-CPU-notification code
- add some additional explanation about the boot code
- kbuild "make clean" fixes
- get rid of another "(____ptrval____)", this time for the VDSO code
- avoid treating cache maintenance faults as a write
- add a frame pointer unwinder implementation for clang
- add EDAC support for Aurora L2 cache
- improve robustness of adjust_lowmem_bounds() finding the bounds of
lowmem.
- add reset control for AMBA primecell devices
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Evmc
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
- fix various clang build and cppcheck issues
- switch ARM to use new common outgoing-CPU-notification code
- add some additional explanation about the boot code
- kbuild "make clean" fixes
- get rid of another "(____ptrval____)", this time for the VDSO code
- avoid treating cache maintenance faults as a write
- add a frame pointer unwinder implementation for clang
- add EDAC support for Aurora L2 cache
- improve robustness of adjust_lowmem_bounds() finding the bounds of
lowmem.
- add reset control for AMBA primecell devices
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (24 commits)
ARM: 8906/1: drivers/amba: add reset control to amba bus probe
ARM: 8905/1: Emit __gnu_mcount_nc when using Clang 10.0.0 or newer
ARM: 8904/1: skip nomap memblocks while finding the lowmem/highmem boundary
ARM: 8903/1: ensure that usable memory in bank 0 starts from a PMD-aligned address
ARM: 8891/1: EDAC: armada_xp: Add support for more SoCs
ARM: 8888/1: EDAC: Add driver for the Marvell Armada XP SDRAM and L2 cache ECC
ARM: 8892/1: EDAC: Add missing debugfs_create_x32 wrapper
ARM: 8890/1: l2x0: add marvell,ecc-enable property for aurora
ARM: 8889/1: dt-bindings: document marvell,ecc-enable binding
ARM: 8886/1: l2x0: support parity-enable/disable on aurora
ARM: 8885/1: aurora-l2: add defines for parity and ECC registers
ARM: 8887/1: aurora-l2: add prefix to MAX_RANGE_SIZE
ARM: 8902/1: l2c: move cache-aurora-l2.h to asm/hardware
ARM: 8900/1: UNWINDER_FRAME_POINTER implementation for Clang
ARM: 8898/1: mm: Don't treat faults reported from cache maintenance as writes
ARM: 8896/1: VDSO: Don't leak kernel addresses
ARM: 8895/1: visit mach-* and plat-* directories when cleaning
ARM: 8894/1: boot: Replace open-coded nop with macro
ARM: 8893/1: boot: Explain the 8 nops
ARM: 8876/1: fix O= building with CONFIG_FPE_FASTFPE
...
The primecell controller on some SoCs, i.e. SoCFPGA, is held in reset
by default. Until recently, the DMA controller was brought out of reset by the bootloader(i.e. U-Boot). But a recent change in U-Boot, the peripherals that are not used are held in reset and are left to Linux to bring them out of reset.
Add a mechanism for getting the reset property and de-assert the primecell module from reset if found. This is a not a hard fail if the reset property is not present in the device tree node, so the driver will continue to probe.
Because there are different variants of the controller that may have
multiple reset signals, the code will find all reset(s) specified and
de-assert them.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Here is the "big" driver core and debugfs changes for 5.3-rc1
It's a lot of different patches, all across the tree due to some api
changes and lots of debugfs cleanups. Because of this, there is going
to be some merge issues with your tree at the moment, I'll follow up
with the expected resolutions to make it easier for you.
Other than the debugfs cleanups, in this set of changes we have:
- bus iteration function cleanups (will cause build warnings
with s390 and coresight drivers in your tree)
- scripts/get_abi.pl tool to display and parse Documentation/ABI
entries in a simple way
- cleanups to Documenatation/ABI/ entries to make them parse
easier due to typos and other minor things
- default_attrs use for some ktype users
- driver model documentation file conversions to .rst
- compressed firmware file loading
- deferred probe fixes
All of these have been in linux-next for a while, with a bunch of merge
issues that Stephen has been patient with me for. Other than the merge
issues, functionality is working properly in linux-next :)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXSgpnQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykcwgCfS30OR4JmwZydWGJ7zK/cHqk+KjsAnjOxjC1K
LpRyb3zX29oChFaZkc5a
=XrEZ
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and debugfs updates from Greg KH:
"Here is the "big" driver core and debugfs changes for 5.3-rc1
It's a lot of different patches, all across the tree due to some api
changes and lots of debugfs cleanups.
Other than the debugfs cleanups, in this set of changes we have:
- bus iteration function cleanups
- scripts/get_abi.pl tool to display and parse Documentation/ABI
entries in a simple way
- cleanups to Documenatation/ABI/ entries to make them parse easier
due to typos and other minor things
- default_attrs use for some ktype users
- driver model documentation file conversions to .rst
- compressed firmware file loading
- deferred probe fixes
All of these have been in linux-next for a while, with a bunch of
merge issues that Stephen has been patient with me for"
* tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits)
debugfs: make error message a bit more verbose
orangefs: fix build warning from debugfs cleanup patch
ubifs: fix build warning after debugfs cleanup patch
driver: core: Allow subsystems to continue deferring probe
drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT
arch_topology: Remove error messages on out-of-memory conditions
lib: notifier-error-inject: no need to check return value of debugfs_create functions
swiotlb: no need to check return value of debugfs_create functions
ceph: no need to check return value of debugfs_create functions
sunrpc: no need to check return value of debugfs_create functions
ubifs: no need to check return value of debugfs_create functions
orangefs: no need to check return value of debugfs_create functions
nfsd: no need to check return value of debugfs_create functions
lib: 842: no need to check return value of debugfs_create functions
debugfs: provide pr_fmt() macro
debugfs: log errors when something goes wrong
drivers: s390/cio: Fix compilation warning about const qualifiers
drivers: Add generic helper to match by of_node
driver_find_device: Unify the match function with class_find_device()
bus_find_device: Unify the match callback with class_find_device
...
The driver_find_device() accepts a match function pointer to
filter the devices for lookup, similar to bus/class_find_device().
However, there is a minor difference in the prototype for the
match parameter for driver_find_device() with the now unified
version accepted by {bus/class}_find_device(), where it doesn't
accept a "const" qualifier for the data argument. This prevents
us from reusing the generic match functions for driver_find_device().
For this reason, change the prototype of the driver_find_device() to
make the "match" parameter in line with {bus/class}_find_device()
and adjust its callers to use the const qualifier. Also, we could
now promote the "data" parameter to const as we pass it down
as a const parameter to the match functions.
Cc: Corey Minyard <minyard@acm.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Sebastian Ott <sebott@linux.ibm.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Nehal Shah <nehal-bakulchandra.shah@amd.com>
Cc: Shyam Sundar S K <shyam-sundar.s-k@amd.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this software is licensed under the terms of the gnu general public
license version 2 as published by the free software foundation and
may be copied distributed and modified under those terms this
program is distributed in the hope that it will be useful but
without any warranty without even the implied warranty of
merchantability or fitness for a particular purpose see the gnu
general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 285 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
clang warns about an unused variable when CONFIG_PM is disabled, since
it is only referenced from an #ifdef:
drivers/amba/tegra-ahb.c:97:18: error: variable 'tegra_ahb_gizmo' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration]
Rather than trying to get the #ifdef right, remove it and use
__maybe_unused here, which is less error prone.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The patches provide an update of amba_device and matching code to handle
the additional registers required for the Class 0x9 (CoreSight) UCI.
The *data pointer in the amba_id is used by the driver to provide extended
ID register values for matching.
CoreSight components where PID/CID pair is currently sufficient for
unique identification need not provide this additional information.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Pull ARM updates from Russell King:
- Initial round of Spectre variant 1 and variant 2 fixes for 32-bit ARM
- Clang support improvements
- nommu updates for v8 MPU
- enable ARM_MODULE_PLTS by default to avoid problems loading modules
with larger kernels
- vmlinux.lds and dma-mapping cleanups
* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (31 commits)
ARM: spectre-v1: fix syscall entry
ARM: spectre-v1: add array_index_mask_nospec() implementation
ARM: spectre-v1: add speculation barrier (csdb) macros
ARM: KVM: report support for SMCCC_ARCH_WORKAROUND_1
ARM: KVM: Add SMCCC_ARCH_WORKAROUND_1 fast handling
ARM: spectre-v2: KVM: invalidate icache on guest exit for Brahma B15
ARM: KVM: invalidate icache on guest exit for Cortex-A15
ARM: KVM: invalidate BTB on guest exit for Cortex-A12/A17
ARM: spectre-v2: warn about incorrect context switching functions
ARM: spectre-v2: add firmware based hardening
ARM: spectre-v2: harden user aborts in kernel space
ARM: spectre-v2: add Cortex A8 and A15 validation of the IBE bit
ARM: spectre-v2: harden branch predictor on context switches
ARM: spectre: add Kconfig symbol for CPUs vulnerable to Spectre
ARM: bugs: add support for per-processor bug checking
ARM: bugs: hook processor bug checking into SMP and suspend paths
ARM: bugs: prepare processor bug infrastructure
ARM: add more CPU part numbers for Cortex and Brahma B15 CPUs
ARM: 8774/1: remove no-op macro VMLINUX_SYMBOL()
ARM: 8773/1: amba: Export amba_bustype
...
Here is the "big" char and misc driver patches for 4.18-rc1.
It's not a lot of stuff here, but there are some highlights:
- coreboot driver updates
- soundwire driver updates
- android binder updates
- fpga big sync, mostly documentation
- lots of minor driver updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWxbXfQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymwCACdFbUy2kWwrpZWSfSBpawfrs75lLMAmwVOe+62
9aDsDWzDVUEFxF20qiE6
=CMJ3
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the "big" char and misc driver patches for 4.18-rc1.
It's not a lot of stuff here, but there are some highlights:
- coreboot driver updates
- soundwire driver updates
- android binder updates
- fpga big sync, mostly documentation
- lots of minor driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (81 commits)
vmw_balloon: fixing double free when batching mode is off
MAINTAINERS: Add driver-api/fpga path
fpga: clarify that unregister functions also free
documentation: fpga: move fpga-region.txt to driver-api
documentation: fpga: add bridge document to driver-api
documentation: fpga: move fpga-mgr.txt to driver-api
Documentation: fpga: move fpga overview to driver-api
fpga: region: kernel-doc fixes
fpga: bridge: kernel-doc fixes
fpga: mgr: kernel-doc fixes
fpga: use SPDX
fpga: region: change api, add fpga_region_create/free
fpga: bridge: change api, don't use drvdata
fpga: manager: change api, don't use drvdata
fpga: region: don't use drvdata in common fpga code
Drivers: hv: vmbus: Removed an unnecessary cast from void *
ver_linux: Drop redundant calls to system() to test if file is readable
ver_linux: Move stderr redirection from function parameter to function body
misc: IBM Virtual Management Channel Driver (VMC)
rpmsg: Correct support for MODULE_DEVICE_TABLE()
...
These include a significant update of the generic power domains (genpd)
and Operating Performance Points (OPP) frameworks, mostly related to
the introduction of power domain performance levels, cpufreq updates
(new driver for Qualcomm Kryo processors, updates of the existing
drivers, some core fixes, schedutil governor improvements), PCI power
management fixes, ACPI workaround for EC-based wakeup events handling
on resume from suspend-to-idle, and major updates of the turbostat
and pm-graph utilities.
Specifics:
- Introduce power domain performance levels into the the generic
power domains (genpd) and Operating Performance Points (OPP)
frameworks (Viresh Kumar, Rajendra Nayak, Dan Carpenter).
- Fix two issues in the runtime PM framework related to the
initialization and removal of devices using device links (Ulf
Hansson).
- Clean up the initialization of drivers for devices in PM domains
(Ulf Hansson, Geert Uytterhoeven).
- Fix a cpufreq core issue related to the policy sysfs interface
causing CPU online to fail for CPUs sharing one cpufreq policy in
some situations (Tao Wang).
- Make it possible to use platform-specific suspend/resume hooks
in the cpufreq-dt driver and make the Armada 37xx DVFS use that
feature (Viresh Kumar, Miquel Raynal).
- Optimize policy transition notifications in cpufreq (Viresh Kumar).
- Improve the iowait boost mechanism in the schedutil cpufreq
governor (Patrick Bellasi).
- Improve the handling of deferred frequency updates in the
schedutil cpufreq governor (Joel Fernandes, Dietmar Eggemann,
Rafael Wysocki, Viresh Kumar).
- Add a new cpufreq driver for Qualcomm Kryo (Ilia Lin).
- Fix and clean up some cpufreq drivers (Colin Ian King, Dmitry
Osipenko, Doug Smythies, Luc Van Oostenryck, Simon Horman,
Viresh Kumar).
- Fix the handling of PCI devices with the DPM_SMART_SUSPEND flag
set and update stale comments in the PCI core PM code (Rafael
Wysocki).
- Work around an issue related to the handling of EC-based wakeup
events in the ACPI PM core during resume from suspend-to-idle if
the EC has been put into the low-power mode (Rafael Wysocki).
- Improve the handling of wakeup source objects in the PM core (Doug
Berger, Mahendran Ganesh, Rafael Wysocki).
- Update the driver core to prevent deferred probe from breaking
suspend/resume ordering (Feng Kan).
- Clean up the PM core somewhat (Bjorn Helgaas, Ulf Hansson, Rafael
Wysocki).
- Make the core suspend/resume code and cpufreq support the RT patch
(Sebastian Andrzej Siewior, Thomas Gleixner).
- Consolidate the PM QoS handling in cpuidle governors (Rafael
Wysocki).
- Fix a possible crash in the hibernation core (Tetsuo Handa).
- Update the rockchip-io Adaptive Voltage Scaling (AVS) driver
(David Wu).
- Update the turbostat utility (fixes, cleanups, new CPU IDs, new
command line options, built-in "Low Power Idle" counters support,
new POLL and POLL% columns) and add an entry for it to MAINTAINERS
(Len Brown, Artem Bityutskiy, Chen Yu, Laura Abbott, Matt Turner,
Prarit Bhargava, Srinivas Pandruvada).
- Update the pm-graph to version 5.1 (Todd Brandt).
- Update the intel_pstate_tracer utility (Doug Smythies).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=wqBV
-----END PGP SIGNATURE-----
Merge tag 'pm-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These include a significant update of the generic power domains
(genpd) and Operating Performance Points (OPP) frameworks, mostly
related to the introduction of power domain performance levels,
cpufreq updates (new driver for Qualcomm Kryo processors, updates of
the existing drivers, some core fixes, schedutil governor
improvements), PCI power management fixes, ACPI workaround for
EC-based wakeup events handling on resume from suspend-to-idle, and
major updates of the turbostat and pm-graph utilities.
Specifics:
- Introduce power domain performance levels into the the generic
power domains (genpd) and Operating Performance Points (OPP)
frameworks (Viresh Kumar, Rajendra Nayak, Dan Carpenter).
- Fix two issues in the runtime PM framework related to the
initialization and removal of devices using device links (Ulf
Hansson).
- Clean up the initialization of drivers for devices in PM domains
(Ulf Hansson, Geert Uytterhoeven).
- Fix a cpufreq core issue related to the policy sysfs interface
causing CPU online to fail for CPUs sharing one cpufreq policy in
some situations (Tao Wang).
- Make it possible to use platform-specific suspend/resume hooks in
the cpufreq-dt driver and make the Armada 37xx DVFS use that
feature (Viresh Kumar, Miquel Raynal).
- Optimize policy transition notifications in cpufreq (Viresh Kumar).
- Improve the iowait boost mechanism in the schedutil cpufreq
governor (Patrick Bellasi).
- Improve the handling of deferred frequency updates in the schedutil
cpufreq governor (Joel Fernandes, Dietmar Eggemann, Rafael Wysocki,
Viresh Kumar).
- Add a new cpufreq driver for Qualcomm Kryo (Ilia Lin).
- Fix and clean up some cpufreq drivers (Colin Ian King, Dmitry
Osipenko, Doug Smythies, Luc Van Oostenryck, Simon Horman, Viresh
Kumar).
- Fix the handling of PCI devices with the DPM_SMART_SUSPEND flag set
and update stale comments in the PCI core PM code (Rafael Wysocki).
- Work around an issue related to the handling of EC-based wakeup
events in the ACPI PM core during resume from suspend-to-idle if
the EC has been put into the low-power mode (Rafael Wysocki).
- Improve the handling of wakeup source objects in the PM core (Doug
Berger, Mahendran Ganesh, Rafael Wysocki).
- Update the driver core to prevent deferred probe from breaking
suspend/resume ordering (Feng Kan).
- Clean up the PM core somewhat (Bjorn Helgaas, Ulf Hansson, Rafael
Wysocki).
- Make the core suspend/resume code and cpufreq support the RT patch
(Sebastian Andrzej Siewior, Thomas Gleixner).
- Consolidate the PM QoS handling in cpuidle governors (Rafael
Wysocki).
- Fix a possible crash in the hibernation core (Tetsuo Handa).
- Update the rockchip-io Adaptive Voltage Scaling (AVS) driver (David
Wu).
- Update the turbostat utility (fixes, cleanups, new CPU IDs, new
command line options, built-in "Low Power Idle" counters support,
new POLL and POLL% columns) and add an entry for it to MAINTAINERS
(Len Brown, Artem Bityutskiy, Chen Yu, Laura Abbott, Matt Turner,
Prarit Bhargava, Srinivas Pandruvada).
- Update the pm-graph to version 5.1 (Todd Brandt).
- Update the intel_pstate_tracer utility (Doug Smythies)"
* tag 'pm-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (128 commits)
tools/power turbostat: update version number
tools/power turbostat: Add Node in output
tools/power turbostat: add node information into turbostat calculations
tools/power turbostat: remove num_ from cpu_topology struct
tools/power turbostat: rename num_cores_per_pkg to num_cores_per_node
tools/power turbostat: track thread ID in cpu_topology
tools/power turbostat: Calculate additional node information for a package
tools/power turbostat: Fix node and siblings lookup data
tools/power turbostat: set max_num_cpus equal to the cpumask length
tools/power turbostat: if --num_iterations, print for specific number of iterations
tools/power turbostat: Add Cannon Lake support
tools/power turbostat: delete duplicate #defines
x86: msr-index.h: Correct SNB_C1/C3_AUTO_UNDEMOTE defines
tools/power turbostat: Correct SNB_C1/C3_AUTO_UNDEMOTE defines
tools/power turbostat: add POLL and POLL% column
tools/power turbostat: Fix --hide Pk%pc10
tools/power turbostat: Build-in "Low Power Idle" counters support
tools/power turbostat: Don't make man pages executable
tools/power turbostat: remove blank lines
tools/power turbostat: a small C-states dump readability immprovement
...
This patch is provided in the context of allowing the Coresight driver
subsystem to be loaded as modules. Coresight uses amba_bus in its call
to bus_find_device() in of_coresight_get_endpoint_device() when
searching for a configurable endpoint device. This patch allows
Coresight to reference amba_bustype when built as a module.
[original LKML submission here: https://lkml.org/lkml/2018/5/9/520]
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Todd Kjos <tkjos@google.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Thierry Reding <treding@nvidia.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The limitation of being able to check only for -EPROBE_DEFER from
dev_pm_domain_attach() has been removed. Hence let's respect all error
codes and bail out accordingly.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
With each bus implementing its own DMA configuration callback, there is no
need for bus to explicitly set the force_dma flag. Modify the
of_dma_configure function to accept an input parameter which specifies if
implicit DMA configuration is required when it is not described by the
firmware.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # PCI parts
Reviewed-by: Rob Herring <robh@kernel.org>
[hch: tweaked the changelog a bit]
Signed-off-by: Christoph Hellwig <hch@lst.de>
ACPI/OF support for configuration of DMA is a bus specific aspect, and
thus should be configured by the bus. Introduces a 'dma_configure' bus
method so that busses can control their DMA capabilities.
Also update the PCI, Platform, ACPI and host1x buses to use the new
method.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # PCI parts
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[hch: simplified host1x_dma_configure based on a comment from Thierry,
rewrote changelog]
Signed-off-by: Christoph Hellwig <hch@lst.de>
The driver_override implementation is susceptible to a race condition
when different threads are reading vs storing a different driver
override. Add locking to avoid this race condition.
Cfr. commits 6265539776 ("driver core: platform: fix race
condition with driver_override") and 9561475db6 ("PCI: Fix race
condition with driver_override").
Fixes: 3cf3857134 ("ARM: 8256/1: driver coamba: add device binding path 'driver_override'")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Todd Kjos <tkjos@google.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For AMBA devices with unconfigured driver override, the
"driver_override" sysfs virtual file is empty, while it contains
"(null)" for platform and PCI devices.
Make AMBA consistent with other buses by dropping the test for a NULL
pointer.
Note that contrary to popular belief, sprintf() handles NULL pointers
fine; they are printed as "(null)".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When printing the driver_override parameter when it is 4095 and 4094
bytes long, the printing code would access invalid memory because we
need count + 1 bytes for printing.
Cfr. commits 4efe874aac ("PCI: Don't read past the end of sysfs
"driver_override" buffer") and bf563b01c2 ("driver core: platform:
Don't read past the end of "driver_override" buffer").
Fixes: 3cf3857134 ("ARM: 8256/1: driver coamba: add device binding path 'driver_override'")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Todd Kjos <tkjos@google.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver_override implementation is susceptible to a race condition
when different threads are reading vs storing a different driver
override. Add locking to avoid this race condition.
Cfr. commits 6265539776 ("driver core: platform: fix race
condition with driver_override") and 9561475db6 ("PCI: Fix race
condition with driver_override").
Fixes: 3cf3857134 ("ARM: 8256/1: driver coamba: add device binding path 'driver_override'")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Todd Kjos <tkjos@google.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- turn dma_cache_sync into a dma_map_ops instance and remove
implementation that purely are dead because the architecture
doesn't support noncoherent allocations
- add a flag for busses that need DMA configuration (Robin Murphy)
-----BEGIN PGP SIGNATURE-----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=ALJf
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-4.15' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- turn dma_cache_sync into a dma_map_ops instance and remove
implementation that purely are dead because the architecture doesn't
support noncoherent allocations
- add a flag for busses that need DMA configuration (Robin Murphy)
* tag 'dma-mapping-4.15' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: turn dma_cache_sync into a dma_map_ops method
sh: make dma_cache_sync a no-op
xtensa: make dma_cache_sync a no-op
unicore32: make dma_cache_sync a no-op
powerpc: make dma_cache_sync a no-op
mn10300: make dma_cache_sync a no-op
microblaze: make dma_cache_sync a no-op
ia64: make dma_cache_sync a no-op
frv: make dma_cache_sync a no-op
x86: make dma_cache_sync a no-op
floppy: consolidate the dummy fd_cacheflush definition
drivers: flag buses which demand DMA configuration
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We do not want the common dma_configure() pathway to apply
indiscriminately to all devices, since there are plenty of buses which
do not have DMA capability, and if their child devices were used for
DMA API calls it would only be indicative of a driver bug. However,
there are a number of buses for which DMA is implicitly expected even
when not described by firmware - those we whitelist with an automatic
opt-in to dma_configure(), assuming that the DMA address space and the
physical address space are equivalent if not otherwise specified.
Commit 7232888366 ("of: restrict DMA configuration") introduced a
short-term fix by comparing explicit bus types, but this approach is far
from pretty, doesn't scale well, and fails to cope at all with bus
drivers which may be built as modules, like host1x. Let's refine things
by making that opt-in a property of the bus type, which neatly addresses
those problems and lets the decision of whether firmware description of
DMA capability should be optional or mandatory stay internal to the bus
drivers themselves.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The dev_attrs field has long been "depreciated" and is finally being
removed, so move the driver to use the "correct" dev_groups field
instead for struct bus_type.
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the call to of_clk_set_defaults() into the amba probe path so
that devices on the amba bus can use the assigned rates and
parents feature of the common clock framework.
Cc: Michael Turquette <mturquette@baylibre.com>
Tested-by: Jorge Ramirez Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
To read pid/cid registers, the probed device need to be properly turned on.
When it is inside a power domain, the bus code should ensure that the
given power domain is enabled before trying to access device's registers.
However in some cases power domain (or clocks) might not be yet available.
Returning -EPROBE_DEFER is not a solution in such case, because callers
don't handle this special error code. Instead such devices are added to the
special list and their registration is retried from periodic worker until
all resources are available.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The symbol depends on ARCH_TEGRA and will default to y. There are no
circumstances under which it is desirable to disable this option.
Signed-off-by: Thierry Reding <treding@nvidia.com>
amba: tegra-ahb: detect and correct bogus base address
From a hardware SoC integration point of view, the starting address of
this IP block in the existing Tegra SoC DT files is off by 4 bytes
from the actual base address. Since we attempt to make old DT files
forward-compatible with newer kernels, we cannot fix the IP block base
address in old DT data. This patch works around the problem by
detecting the four byte base address offset in the driver code, and
correcting it if it's detected. (In general, IP block base addresses
almost always have a null low byte.)
Future SoC DT data for Tegra AHB should use the correct Tegra AHB base
address, in cases where there is no DT data backward compatibility
requirement.
This patch is a revision of the patch originally titled
"amba: tegra-ahb: use correct base address for future chip support".
This revision implements changes requested by Russell King:
http://marc.info/?l=linux-tegra&m=142658851825062&w=2http://marc.info/?l=linux-tegra&m=142658873925178&w=2
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Paul Walmsley <pwalmsley@nvidia.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Hiroshi DOYU <hdoyu@nvidia.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: linux-kernel@vger.kernel.org
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
amba: tegra-ahb: fix register offsets in the macros
From a hardware SoC integration point of view, the offsets of the
Tegra AHB registers that are currently defined in tegra-ahb.c macros
are all off by four bytes. Similarly, the starting address of this IP
block in our existing DT files is also off by four bytes. Since we
attempt to make old DT files forward-compatible with newer kernels, we
cannot fix the IP block base address in old DT data. However, we can
fix the offsets in the driver so that they are correct with respect to
the hardware, which is what this patch does. And a subsequent patch
will allow the offset to be removed for DT 'compatible' strings used
in future DT files for newer Tegra chips that the kernel does not yet
support.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Paul Walmsley <pwalmsley@nvidia.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Hiroshi DOYU <hdoyu@nvidia.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: linux-kernel@vger.kernel.org
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Here's the big char/misc driver update for 3.19-rc1
Lots of little things all over the place in different drivers, and a new
subsystem, "coresight" has been added. Full details are in the
shortlog.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlSODosACgkQMUfUDdst+ykSNwCfcqx1Z3rQzbLwSrR2sa1fV3Zb
yEAAniJoLZ4ZkoQK4/1ozsFc31q+gXNm
=/epr
-----END PGP SIGNATURE-----
Merge tag 'char-misc-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here's the big char/misc driver update for 3.19-rc1
Lots of little things all over the place in different drivers, and a
new subsystem, "coresight" has been added. Full details are in the
shortlog"
* tag 'char-misc-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (73 commits)
parport: parport_pc, do not remove parent devices early
spmi: Remove shutdown/suspend/resume kernel-doc
carma-fpga-program: drop videobuf dependency
carma-fpga: drop videobuf dependency
carma-fpga-program.c: fix compile errors
i8k: Fix temperature bug handling in i8k_get_temp()
cxl: Name interrupts in /proc/interrupt
CXL: Return error to PSL if IRQ demultiplexing fails & print clearer warning
coresight-replicator: remove .owner field for driver
coresight: fixed comments in coresight.h
coresight: fix typo in comment in coresight-priv.h
coresight: bindings for coresight drivers
coresight: Adding ABI documentation
w1: support auto-load of w1_bq27000 module.
w1: avoid potential u16 overflow
cn: verify msg->len before making callback
mei: export fw status registers through sysfs
mei: read and print all six FW status registers
mei: txe: add cherrytrail device id
mei: kill cached host and me csr values
...
Here's the set of driver core patches for 3.19-rc1.
They are dominated by the removal of the .owner field in platform
drivers. They touch a lot of files, but they are "simple" changes, just
removing a line in a structure.
Other than that, a few minor driver core and debugfs changes. There are
some ath9k patches coming in through this tree that have been acked by
the wireless maintainers as they relied on the debugfs changes.
Everything has been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlSOD20ACgkQMUfUDdst+ylLPACg2QrW1oHhdTMT9WI8jihlHVRM
53kAoLeteByQ3iVwWurwwseRPiWa8+MI
=OVRS
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core update from Greg KH:
"Here's the set of driver core patches for 3.19-rc1.
They are dominated by the removal of the .owner field in platform
drivers. They touch a lot of files, but they are "simple" changes,
just removing a line in a structure.
Other than that, a few minor driver core and debugfs changes. There
are some ath9k patches coming in through this tree that have been
acked by the wireless maintainers as they relied on the debugfs
changes.
Everything has been in linux-next for a while"
* tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits)
Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries"
fs: debugfs: add forward declaration for struct device type
firmware class: Deletion of an unnecessary check before the function call "vunmap"
firmware loader: fix hung task warning dump
devcoredump: provide a one-way disable function
device: Add dev_<level>_once variants
ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries
ath: use seq_file api for ath9k debugfs files
debugfs: add helper function to create device related seq_file
drivers/base: cacheinfo: remove noisy error boot message
Revert "core: platform: add warning if driver has no owner"
drivers: base: support cpu cache information interface to userspace via sysfs
drivers: base: add cpu_device_create to support per-cpu devices
topology: replace custom attribute macros with standard DEVICE_ATTR*
cpumask: factor out show_cpumap into separate helper function
driver core: Fix unbalanced device reference in drivers_probe
driver core: fix race with userland in device_add()
sysfs/kernfs: make read requests on pre-alloc files use the buffer.
sysfs/kernfs: allow attributes to request write buffer be pre-allocated.
fs: sysfs: return EGBIG on write if offset is larger than file size
...
Pull ARM updates from Russell King:
"The major updates included in this update are:
- Clang compatible stack pointer accesses by Behan Webster.
- SA11x0 updates from Dmitry Eremin-Solenikov.
- kgdb handling of breakpoints with read-only text/modules
- Support for Privileged-no-execute feature on ARMv7 to prevent
userspace code execution by the kernel.
- AMBA primecell bus handling of irq-safe runtime PM
- Unwinding support for memset/memzero/memmove/memcpy functions
- VFP fixes for Krait CPUs and improvements in detecting the VFP
architecture
- A number of code cleanups (using pr_*, removing or reducing the
severity of a couple of kernel messages, splitting ftrace asm code
out to a separate file, etc.)
- Add machine name to stack dump output"
* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (62 commits)
ARM: 8247/2: pcmcia: sa1100: make use of device clock
ARM: 8246/2: pcmcia: sa1111: provide device clock
ARM: 8245/1: pcmcia: soc-common: enable/disable socket clocks
ARM: 8244/1: fbdev: sa1100fb: make use of device clock
ARM: 8243/1: sa1100: add a clock alias for sa1111 pcmcia device
ARM: 8242/1: sa1100: add cpu clock
ARM: 8221/1: PJ4: allow building in Thumb-2 mode
ARM: 8234/1: sa1100: reorder IRQ handling code
ARM: 8233/1: sa1100: switch to hwirq usage
ARM: 8232/1: sa1100: merge GPIO multiplexer IRQ to "normal" irq domain
ARM: 8231/1: sa1100: introduce irqdomains support
ARM: 8230/1: sa1100: shift IRQs by one
ARM: 8229/1: sa1100: replace irq numbers with names in irq driver
ARM: 8228/1: sa1100: drop entry-macro.S
ARM: 8227/1: sa1100: switch to MULTI_IRQ_HANDLER
ARM: 8241/1: Update processor_modes for hyp and monitor mode
ARM: 8240/1: MCPM: document mcpm_sync_init()
ARM: 8239/1: Introduce {set,clear}_pte_bit
ARM: 8238/1: mm: Refine set_memory_* functions
ARM: 8237/1: fix flush_pfn_alias
...
This time we have some more new material than we used to have during
the last couple of development cycles.
The most important part of it to me is the introduction of a unified
interface for accessing device properties provided by platform
firmware. It works with Device Trees and ACPI in a uniform way and
drivers using it need not worry about where the properties come
from as long as the platform firmware (either DT or ACPI) makes
them available. It covers both devices and "bare" device node
objects without struct device representation as that turns out to
be necessary in some cases. This has been in the works for quite
a few months (and development cycles) and has been approved by
all of the relevant maintainers.
On top of that, some drivers are switched over to the new interface
(at25, leds-gpio, gpio_keys_polled) and some additional changes are
made to the core GPIO subsystem to allow device drivers to manipulate
GPIOs in the "canonical" way on platforms that provide GPIO information
in their ACPI tables, but don't assign names to GPIO lines (in which
case the driver needs to do that on the basis of what it knows about
the device in question). That also has been approved by the GPIO
core maintainers and the rfkill driver is now going to use it.
Second is support for hardware P-states in the intel_pstate driver.
It uses CPUID to detect whether or not the feature is supported by
the processor in which case it will be enabled by default. However,
it can be disabled entirely from the kernel command line if necessary.
Next is support for a platform firmware interface based on ACPI
operation regions used by the PMIC (Power Management Integrated
Circuit) chips on the Intel Baytrail-T and Baytrail-T-CR platforms.
That interface is used for manipulating power resources and for
thermal management: sensor temperature reporting, trip point setting
and so on.
Also the ACPI core is now going to support the _DEP configuration
information in a limited way. Basically, _DEP it supposed to reflect
off-the-hierarchy dependencies between devices which may be very
indirect, like when AML for one device accesses locations in an
operation region handled by another device's driver (usually, the
device depended on this way is a serial bus or GPIO controller).
The support added this time is sufficient to make the ACPI battery
driver work on Asus T100A, but it is general enough to be able to
cover some other use cases in the future.
Finally, we have a new cpufreq driver for the Loongson1B processor.
In addition to the above, there are fixes and cleanups all over the
place as usual and a traditional ACPICA update to a recent upstream
release.
As far as the fixes go, the ACPI LPSS (Low-power Subsystem) driver
for Intel platforms should be able to handle power management of
the DMA engine correctly, the cpufreq-dt driver should interact
with the thermal subsystem in a better way and the ACPI backlight
driver should handle some more corner cases, among other things.
On top of the ACPICA update there are fixes for race conditions
in the ACPICA's interrupt handling code which might lead to some
random and strange looking failures on some systems.
In the cleanups department the most visible part is the series
of commits targeted at getting rid of the CONFIG_PM_RUNTIME
configuration option. That was triggered by a discussion
regarding the generic power domains code during which we realized
that trying to support certain combinations of PM config options
was painful and not really worth it, because nobody would use them
in production anyway. For this reason, we decided to make
CONFIG_PM_SLEEP select CONFIG_PM_RUNTIME and that lead to the
conclusion that the latter became redundant and CONFIG_PM could
be used instead of it. The material here makes that replacement
in a major part of the tree, but there will be at least one more
batch of that in the second part of the merge window.
Specifics:
- Support for retrieving device properties information from ACPI
_DSD device configuration objects and a unified device properties
interface for device drivers (and subsystems) on top of that.
As stated above, this works with Device Trees and ACPI and allows
device drivers to be written in a platform firmware (DT or ACPI)
agnostic way. The at25, leds-gpio and gpio_keys_polled drivers
are now going to use this new interface and the GPIO subsystem
is additionally modified to allow device drivers to assign names
to GPIO resources returned by ACPI _CRS objects (in case _DSD is
not present or does not provide the expected data). The changes
in this set are mostly from Mika Westerberg, Rafael J Wysocki,
Aaron Lu, and Darren Hart with some fixes from others (Fabio Estevam,
Geert Uytterhoeven).
- Support for Hardware Managed Performance States (HWP) as described
in Volume 3, section 14.4, of the Intel SDM in the intel_pstate
driver. CPUID is used to detect whether or not the feature is
supported by the processor. If supported, it will be enabled
automatically unless the intel_pstate=no_hwp switch is present in
the kernel command line. From Dirk Brandewie.
- New Intel Broadwell-H ID for intel_pstate (Dirk Brandewie).
- Support for firmware interface based on ACPI operation regions
used by the PMIC chips on the Intel Baytrail-T and Baytrail-T-CR
platforms for power resource control and thermal management
(Aaron Lu).
- Limited support for retrieving off-the-hierarchy dependencies
between devices from ACPI _DEP device configuration objects
and deferred probing support for the ACPI battery driver based
on the _DEP information to make that driver work on Asus T100A
(Lan Tianyu).
- New cpufreq driver for the Loongson1B processor (Kelvin Cheung).
- ACPICA update to upstream revision 20141107 which only affects
tools (Bob Moore).
- Fixes for race conditions in the ACPICA's interrupt handling
code and in the ACPI code related to system suspend and resume
(Lv Zheng and Rafael J Wysocki).
- ACPI core fix for an RCU-related issue in the ioremap() regions
management code that slowed down significantly after CPUs had
been allowed to enter idle states even if they'd had RCU callbakcs
queued and triggered some problems in certain proprietary graphics
driver (and elsewhere). The fix replaces synchronize_rcu() in
that code with synchronize_rcu_expedited() which makes the issue
go away. From Konstantin Khlebnikov.
- ACPI LPSS (Low-Power Subsystem) driver fix to handle power
management of the DMA engine included into the LPSS correctly.
The problem is that the DMA engine doesn't have ACPI PM support
of its own and it simply is turned off when the last LPSS device
having ACPI PM support goes into D3cold. To work around that,
the PM domain used by the ACPI LPSS driver is redesigned so at
least one device with ACPI PM support will be on as long as the
DMA engine is in use. From Andy Shevchenko.
- ACPI backlight driver fix to avoid using it on "Win8-compatible"
systems where it doesn't work and where it was used by default by
mistake (Aaron Lu).
- Assorted minor ACPI core fixes and cleanups from Tomasz Nowicki,
Sudeep Holla, Huang Rui, Hanjun Guo, Fabian Frederick, and
Ashwin Chaugule (mostly related to the upcoming ARM64 support).
- Intel RAPL (Running Average Power Limit) power capping driver
fixes and improvements including new processor IDs (Jacob Pan).
- Generic power domains modification to power up domains after
attaching devices to them to meet the expectations of device
drivers and bus types assuming devices to be accessible at
probe time (Ulf Hansson).
- Preliminary support for controlling device clocks from the
generic power domains core code and modifications of the
ARM/shmobile platform to use that feature (Ulf Hansson).
- Assorted minor fixes and cleanups of the generic power
domains core code (Ulf Hansson, Geert Uytterhoeven).
- Assorted minor fixes and cleanups of the device clocks control
code in the PM core (Geert Uytterhoeven, Grygorii Strashko).
- Consolidation of device power management Kconfig options by making
CONFIG_PM_SLEEP select CONFIG_PM_RUNTIME and removing the latter
which is now redundant (Rafael J Wysocki and Kevin Hilman). That
is the first batch of the changes needed for this purpose.
- Core device runtime power management support code cleanup related
to the execution of callbacks (Andrzej Hajda).
- cpuidle ARM support improvements (Lorenzo Pieralisi).
- cpuidle cleanup related to the CPUIDLE_FLAG_TIME_VALID flag and
a new MAINTAINERS entry for ARM Exynos cpuidle (Daniel Lezcano and
Bartlomiej Zolnierkiewicz).
- New cpufreq driver callback (->ready) to be executed when the
cpufreq core is ready to use a given policy object and cpufreq-dt
driver modification to use that callback for cooling device
registration (Viresh Kumar).
- cpufreq core fixes and cleanups (Viresh Kumar, Vince Hsu,
James Geboski, Tomeu Vizoso).
- Assorted fixes and cleanups in the cpufreq-pcc, intel_pstate,
cpufreq-dt, pxa2xx cpufreq drivers (Lenny Szubowicz, Ethan Zhao,
Stefan Wahren, Petr Cvek).
- OPP (Operating Performance Points) framework modification to
allow OPPs to be removed too and update of a few cpufreq drivers
(cpufreq-dt, exynos5440, imx6q, cpufreq) to remove OPPs (added
during initialization) on driver removal (Viresh Kumar).
- Hibernation core fixes and cleanups (Tina Ruchandani and
Markus Elfring).
- PM Kconfig fix related to CPU power management (Pankaj Dubey).
- cpupower tool fix (Prarit Bhargava).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=5dox
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management updates from Rafael Wysocki:
"This time we have some more new material than we used to have during
the last couple of development cycles.
The most important part of it to me is the introduction of a unified
interface for accessing device properties provided by platform
firmware. It works with Device Trees and ACPI in a uniform way and
drivers using it need not worry about where the properties come from
as long as the platform firmware (either DT or ACPI) makes them
available. It covers both devices and "bare" device node objects
without struct device representation as that turns out to be necessary
in some cases. This has been in the works for quite a few months (and
development cycles) and has been approved by all of the relevant
maintainers.
On top of that, some drivers are switched over to the new interface
(at25, leds-gpio, gpio_keys_polled) and some additional changes are
made to the core GPIO subsystem to allow device drivers to manipulate
GPIOs in the "canonical" way on platforms that provide GPIO
information in their ACPI tables, but don't assign names to GPIO lines
(in which case the driver needs to do that on the basis of what it
knows about the device in question). That also has been approved by
the GPIO core maintainers and the rfkill driver is now going to use
it.
Second is support for hardware P-states in the intel_pstate driver.
It uses CPUID to detect whether or not the feature is supported by the
processor in which case it will be enabled by default. However, it
can be disabled entirely from the kernel command line if necessary.
Next is support for a platform firmware interface based on ACPI
operation regions used by the PMIC (Power Management Integrated
Circuit) chips on the Intel Baytrail-T and Baytrail-T-CR platforms.
That interface is used for manipulating power resources and for
thermal management: sensor temperature reporting, trip point setting
and so on.
Also the ACPI core is now going to support the _DEP configuration
information in a limited way. Basically, _DEP it supposed to reflect
off-the-hierarchy dependencies between devices which may be very
indirect, like when AML for one device accesses locations in an
operation region handled by another device's driver (usually, the
device depended on this way is a serial bus or GPIO controller). The
support added this time is sufficient to make the ACPI battery driver
work on Asus T100A, but it is general enough to be able to cover some
other use cases in the future.
Finally, we have a new cpufreq driver for the Loongson1B processor.
In addition to the above, there are fixes and cleanups all over the
place as usual and a traditional ACPICA update to a recent upstream
release.
As far as the fixes go, the ACPI LPSS (Low-power Subsystem) driver for
Intel platforms should be able to handle power management of the DMA
engine correctly, the cpufreq-dt driver should interact with the
thermal subsystem in a better way and the ACPI backlight driver should
handle some more corner cases, among other things.
On top of the ACPICA update there are fixes for race conditions in the
ACPICA's interrupt handling code which might lead to some random and
strange looking failures on some systems.
In the cleanups department the most visible part is the series of
commits targeted at getting rid of the CONFIG_PM_RUNTIME configuration
option. That was triggered by a discussion regarding the generic
power domains code during which we realized that trying to support
certain combinations of PM config options was painful and not really
worth it, because nobody would use them in production anyway. For
this reason, we decided to make CONFIG_PM_SLEEP select
CONFIG_PM_RUNTIME and that lead to the conclusion that the latter
became redundant and CONFIG_PM could be used instead of it. The
material here makes that replacement in a major part of the tree, but
there will be at least one more batch of that in the second part of
the merge window.
Specifics:
- Support for retrieving device properties information from ACPI _DSD
device configuration objects and a unified device properties
interface for device drivers (and subsystems) on top of that. As
stated above, this works with Device Trees and ACPI and allows
device drivers to be written in a platform firmware (DT or ACPI)
agnostic way. The at25, leds-gpio and gpio_keys_polled drivers are
now going to use this new interface and the GPIO subsystem is
additionally modified to allow device drivers to assign names to
GPIO resources returned by ACPI _CRS objects (in case _DSD is not
present or does not provide the expected data). The changes in
this set are mostly from Mika Westerberg, Rafael J Wysocki, Aaron
Lu, and Darren Hart with some fixes from others (Fabio Estevam,
Geert Uytterhoeven).
- Support for Hardware Managed Performance States (HWP) as described
in Volume 3, section 14.4, of the Intel SDM in the intel_pstate
driver. CPUID is used to detect whether or not the feature is
supported by the processor. If supported, it will be enabled
automatically unless the intel_pstate=no_hwp switch is present in
the kernel command line. From Dirk Brandewie.
- New Intel Broadwell-H ID for intel_pstate (Dirk Brandewie).
- Support for firmware interface based on ACPI operation regions used
by the PMIC chips on the Intel Baytrail-T and Baytrail-T-CR
platforms for power resource control and thermal management (Aaron
Lu).
- Limited support for retrieving off-the-hierarchy dependencies
between devices from ACPI _DEP device configuration objects and
deferred probing support for the ACPI battery driver based on the
_DEP information to make that driver work on Asus T100A (Lan
Tianyu).
- New cpufreq driver for the Loongson1B processor (Kelvin Cheung).
- ACPICA update to upstream revision 20141107 which only affects
tools (Bob Moore).
- Fixes for race conditions in the ACPICA's interrupt handling code
and in the ACPI code related to system suspend and resume (Lv Zheng
and Rafael J Wysocki).
- ACPI core fix for an RCU-related issue in the ioremap() regions
management code that slowed down significantly after CPUs had been
allowed to enter idle states even if they'd had RCU callbakcs
queued and triggered some problems in certain proprietary graphics
driver (and elsewhere). The fix replaces synchronize_rcu() in that
code with synchronize_rcu_expedited() which makes the issue go
away. From Konstantin Khlebnikov.
- ACPI LPSS (Low-Power Subsystem) driver fix to handle power
management of the DMA engine included into the LPSS correctly. The
problem is that the DMA engine doesn't have ACPI PM support of its
own and it simply is turned off when the last LPSS device having
ACPI PM support goes into D3cold. To work around that, the PM
domain used by the ACPI LPSS driver is redesigned so at least one
device with ACPI PM support will be on as long as the DMA engine is
in use. From Andy Shevchenko.
- ACPI backlight driver fix to avoid using it on "Win8-compatible"
systems where it doesn't work and where it was used by default by
mistake (Aaron Lu).
- Assorted minor ACPI core fixes and cleanups from Tomasz Nowicki,
Sudeep Holla, Huang Rui, Hanjun Guo, Fabian Frederick, and Ashwin
Chaugule (mostly related to the upcoming ARM64 support).
- Intel RAPL (Running Average Power Limit) power capping driver fixes
and improvements including new processor IDs (Jacob Pan).
- Generic power domains modification to power up domains after
attaching devices to them to meet the expectations of device
drivers and bus types assuming devices to be accessible at probe
time (Ulf Hansson).
- Preliminary support for controlling device clocks from the generic
power domains core code and modifications of the ARM/shmobile
platform to use that feature (Ulf Hansson).
- Assorted minor fixes and cleanups of the generic power domains core
code (Ulf Hansson, Geert Uytterhoeven).
- Assorted minor fixes and cleanups of the device clocks control code
in the PM core (Geert Uytterhoeven, Grygorii Strashko).
- Consolidation of device power management Kconfig options by making
CONFIG_PM_SLEEP select CONFIG_PM_RUNTIME and removing the latter
which is now redundant (Rafael J Wysocki and Kevin Hilman). That
is the first batch of the changes needed for this purpose.
- Core device runtime power management support code cleanup related
to the execution of callbacks (Andrzej Hajda).
- cpuidle ARM support improvements (Lorenzo Pieralisi).
- cpuidle cleanup related to the CPUIDLE_FLAG_TIME_VALID flag and a
new MAINTAINERS entry for ARM Exynos cpuidle (Daniel Lezcano and
Bartlomiej Zolnierkiewicz).
- New cpufreq driver callback (->ready) to be executed when the
cpufreq core is ready to use a given policy object and cpufreq-dt
driver modification to use that callback for cooling device
registration (Viresh Kumar).
- cpufreq core fixes and cleanups (Viresh Kumar, Vince Hsu, James
Geboski, Tomeu Vizoso).
- Assorted fixes and cleanups in the cpufreq-pcc, intel_pstate,
cpufreq-dt, pxa2xx cpufreq drivers (Lenny Szubowicz, Ethan Zhao,
Stefan Wahren, Petr Cvek).
- OPP (Operating Performance Points) framework modification to allow
OPPs to be removed too and update of a few cpufreq drivers
(cpufreq-dt, exynos5440, imx6q, cpufreq) to remove OPPs (added
during initialization) on driver removal (Viresh Kumar).
- Hibernation core fixes and cleanups (Tina Ruchandani and Markus
Elfring).
- PM Kconfig fix related to CPU power management (Pankaj Dubey).
- cpupower tool fix (Prarit Bhargava)"
* tag 'pm+acpi-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (120 commits)
i2c-omap / PM: Drop CONFIG_PM_RUNTIME from i2c-omap.c
dmaengine / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
tools: cpupower: fix return checks for sysfs_get_idlestate_count()
drivers: sh / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
e1000e / igb / PM: Eliminate CONFIG_PM_RUNTIME
MMC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
MFD / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
misc / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
media / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
input / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
leds: leds-gpio: Fix multiple instances registration without 'label' property
iio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
hsi / OMAP / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
i2c-hid / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
drm / exynos / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
gpio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
hwrandom / exynos / PM: Use CONFIG_PM in #ifdef
block / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
USB / PM: Drop CONFIG_PM_RUNTIME from the USB core
PM: Merge the SET*_RUNTIME_PM_OPS() macros
...
The SET_PM_RUNTIME_PM_OPS() and SET_RUNTIME_PM_OPS() macros are
identical except that one of them is not empty for CONFIG_PM set,
while the other one is not empty for CONFIG_PM_RUNTIME set,
respectively.
However, after commit b2b49ccbdd (PM: Kconfig: Set PM_RUNTIME if
PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so one
of these macros is now redundant.
For this reason, replace SET_PM_RUNTIME_PM_OPS() with
SET_RUNTIME_PM_OPS() everywhere and redefine the SET_PM_RUNTIME_PM_OPS
symbol as SET_RUNTIME_PM_OPS in case new code is starting to use the
macro being removed here.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rather than duplicate the ARM_AMBA Kconfig symbol in both 32-bit and
64-bit ARM architectures, move the common definition to drivers/amba
where dependent drivers will be located.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The AMBA bus driver defines runtime Power Management functions which
disable and unprepare AMBA bus clock. This is problematic for runtime PM
because unpreparing a clock might sleep so it is not interrupt safe.
However some drivers may want to implement runtime PM functions in
interrupt-safe way (see pm_runtime_irq_safe()). In such case the AMBA
bus driver should only disable/enable the clock in runtime suspend and
resume callbacks.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Greg Kroah-Hartman