From ddd7e8b7b84836c584a284b98ca9bd7a348a0558 Mon Sep 17 00:00:00 2001 From: Liu Jian Date: Fri, 16 Jul 2021 12:06:17 +0800 Subject: [PATCH 01/27] igmp: Add ip_mc_list lock in ip_check_mc_rcu commit 23d2b94043ca8835bd1e67749020e839f396a1c2 upstream. I got below panic when doing fuzz test: Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 4056 Comm: syz-executor.3 Tainted: G B 5.14.0-rc1-00195-gcff5c4254439-dirty #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack_lvl+0x7a/0x9b panic+0x2cd/0x5af end_report.cold+0x5a/0x5a kasan_report+0xec/0x110 ip_check_mc_rcu+0x556/0x5d0 __mkroute_output+0x895/0x1740 ip_route_output_key_hash_rcu+0x2d0/0x1050 ip_route_output_key_hash+0x182/0x2e0 ip_route_output_flow+0x28/0x130 udp_sendmsg+0x165d/0x2280 udpv6_sendmsg+0x121e/0x24f0 inet6_sendmsg+0xf7/0x140 sock_sendmsg+0xe9/0x180 ____sys_sendmsg+0x2b8/0x7a0 ___sys_sendmsg+0xf0/0x160 __sys_sendmmsg+0x17e/0x3c0 __x64_sys_sendmmsg+0x9e/0x100 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x462eb9 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f3df5af1c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462eb9 RDX: 0000000000000312 RSI: 0000000020001700 RDI: 0000000000000007 RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f3df5af26bc R13: 00000000004c372d R14: 0000000000700b10 R15: 00000000ffffffff It is one use-after-free in ip_check_mc_rcu. In ip_mc_del_src, the ip_sf_list of pmc has been freed under pmc->lock protection. But access to ip_sf_list in ip_check_mc_rcu is not protected by the lock. Signed-off-by: Liu Jian Signed-off-by: David S. Miller Signed-off-by: Lee Jones Signed-off-by: Greg Kroah-Hartman --- net/ipv4/igmp.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c index 00576bae183d..0c321996c6eb 100644 --- a/net/ipv4/igmp.c +++ b/net/ipv4/igmp.c @@ -2720,6 +2720,7 @@ int ip_check_mc_rcu(struct in_device *in_dev, __be32 mc_addr, __be32 src_addr, u rv = 1; } else if (im) { if (src_addr) { + spin_lock_bh(&im->lock); for (psf = im->sources; psf; psf = psf->sf_next) { if (psf->sf_inaddr == src_addr) break; @@ -2730,6 +2731,7 @@ int ip_check_mc_rcu(struct in_device *in_dev, __be32 mc_addr, __be32 src_addr, u im->sfcount[MCAST_EXCLUDE]; else rv = im->sfcount[MCAST_EXCLUDE] != 0; + spin_unlock_bh(&im->lock); } else rv = 1; /* unspecified source; tentatively allow */ } From 6e2c4e6656239ff569c0b23bf08cab1d9eb98851 Mon Sep 17 00:00:00 2001 From: Tom Rix Date: Mon, 11 Jan 2021 14:09:04 -0800 Subject: [PATCH 02/27] USB: serial: mos7720: improve OOM-handling in read_mos_reg() commit 161a582bd1d8681095f158d11bc679a58f1d026b upstream. clang static analysis reports this problem mos7720.c:352:2: warning: Undefined or garbage value returned to caller return d; ^~~~~~~~ In the parport_mos7715_read_data()'s call to read_mos_reg(), 'd' is only set after the alloc block. buf = kmalloc(1, GFP_KERNEL); if (!buf) return -ENOMEM; Although the problem is reported in parport_most7715_read_data(), none of the callee's of read_mos_reg() check the return status. Make sure to clear the return-value buffer also on allocation failures. Fixes: 0d130367abf5 ("USB: serial: mos7720: fix control-message error handling") Signed-off-by: Tom Rix Link: https://lore.kernel.org/r/20210111220904.1035957-1-trix@redhat.com [ johan: only clear the buffer on errors, amend commit message ] Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/mos7720.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index b418a0d4adb8..c713d98b4a20 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -226,8 +226,10 @@ static int read_mos_reg(struct usb_serial *serial, unsigned int serial_portnum, int status; buf = kmalloc(1, GFP_KERNEL); - if (!buf) + if (!buf) { + *data = 0; return -ENOMEM; + } status = usb_control_msg(usbdev, pipe, request, requesttype, value, index, buf, 1, MOS_WDR_TIMEOUT); From 50e56c68e1efcec2582cf5ca2f67133a13bb8fb6 Mon Sep 17 00:00:00 2001 From: Esben Haabendal Date: Mon, 21 Jun 2021 10:20:08 +0200 Subject: [PATCH 03/27] net: ll_temac: Remove left-over debug message commit ce03b94ba682a67e8233c9ee3066071656ded58f upstream. Fixes: f63963411942 ("net: ll_temac: Avoid ndo_start_xmit returning NETDEV_TX_BUSY") Signed-off-by: Esben Haabendal Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- drivers/net/ethernet/xilinx/ll_temac_main.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/net/ethernet/xilinx/ll_temac_main.c b/drivers/net/ethernet/xilinx/ll_temac_main.c index 6bd3a389d389..650ffb93796f 100644 --- a/drivers/net/ethernet/xilinx/ll_temac_main.c +++ b/drivers/net/ethernet/xilinx/ll_temac_main.c @@ -942,10 +942,8 @@ temac_start_xmit(struct sk_buff *skb, struct net_device *ndev) wmb(); lp->dma_out(lp, TX_TAILDESC_PTR, tail_p); /* DMA start */ - if (temac_check_tx_bd_space(lp, MAX_SKB_FRAGS + 1)) { - netdev_info(ndev, "%s -> netif_stop_queue\n", __func__); + if (temac_check_tx_bd_space(lp, MAX_SKB_FRAGS + 1)) netif_stop_queue(ndev); - } return NETDEV_TX_OK; } From c4225992060bb9a851f0dcb3814f319ab90cfa3e Mon Sep 17 00:00:00 2001 From: Muchun Song Date: Mon, 14 Dec 2020 19:11:25 -0800 Subject: [PATCH 04/27] mm/page_alloc: speed up the iteration of max_order commit 7ad69832f37e3cea8557db6df7c793905f1135e8 upstream. When we free a page whose order is very close to MAX_ORDER and greater than pageblock_order, it wastes some CPU cycles to increase max_order to MAX_ORDER one by one and check the pageblock migratetype of that page repeatedly especially when MAX_ORDER is much larger than pageblock_order. We also should not be checking migratetype of buddy when "order == MAX_ORDER - 1" as the buddy pfn may be invalid, so adjust the condition. With the new check, we don't need the max_order check anymore, so we replace it. Also adjust max_order initialization so that it's lower by one than previously, which makes the code hopefully more clear. Link: https://lkml.kernel.org/r/20201204155109.55451-1-songmuchun@bytedance.com Fixes: d9dddbf55667 ("mm/page_alloc: prevent merging between isolated and other pageblocks") Signed-off-by: Muchun Song Acked-by: Vlastimil Babka Reviewed-by: Oscar Salvador Reviewed-by: David Hildenbrand Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman --- mm/page_alloc.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 0166558d3d64..e8e0f1cec8b0 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -996,7 +996,7 @@ static inline void __free_one_page(struct page *page, struct page *buddy; bool to_tail; - max_order = min_t(unsigned int, MAX_ORDER, pageblock_order + 1); + max_order = min_t(unsigned int, MAX_ORDER - 1, pageblock_order); VM_BUG_ON(!zone_is_initialized(zone)); VM_BUG_ON_PAGE(page->flags & PAGE_FLAGS_CHECK_AT_PREP, page); @@ -1009,7 +1009,7 @@ static inline void __free_one_page(struct page *page, VM_BUG_ON_PAGE(bad_range(zone, page), page); continue_merging: - while (order < max_order - 1) { + while (order < max_order) { if (compaction_capture(capc, page, order, migratetype)) { __mod_zone_freepage_state(zone, -(1 << order), migratetype); @@ -1035,7 +1035,7 @@ continue_merging: pfn = combined_pfn; order++; } - if (max_order < MAX_ORDER) { + if (order < MAX_ORDER - 1) { /* If we are here, it means order is >= pageblock_order. * We want to prevent merge between freepages on isolate * pageblock and normal pageblock. Without this, pageblock @@ -1056,7 +1056,7 @@ continue_merging: is_migrate_isolate(buddy_mt))) goto done_merging; } - max_order++; + max_order = order + 1; goto continue_merging; } From 7ff0b71b6826ab93313af2c2a3e00c9dd93fb1b6 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 10 Nov 2020 09:57:46 -0800 Subject: [PATCH 05/27] net: kcov: don't select SKB_EXTENSIONS when there is no NET commit 85ce50d337d10a6fd328fa70b0a15543bf5c0f64 upstream. Fix kconfig warning when CONFIG_NET is not set/enabled: WARNING: unmet direct dependencies detected for SKB_EXTENSIONS Depends on [n]: NET [=n] Selected by [y]: - KCOV [=y] && ARCH_HAS_KCOV [=y] && (CC_HAS_SANCOV_TRACE_PC [=y] || GCC_PLUGINS [=n]) Fixes: 6370cc3bbd8a ("net: add kcov handle to skb extensions") Signed-off-by: Randy Dunlap Cc: Aleksandr Nogikh Cc: Willem de Bruijn Link: https://lore.kernel.org/r/20201110175746.11437-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman --- lib/Kconfig.debug | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index ffccc13d685b..bf174798afcb 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -1869,7 +1869,7 @@ config KCOV depends on CC_HAS_SANCOV_TRACE_PC || GCC_PLUGINS select DEBUG_FS select GCC_PLUGIN_SANCOV if !CC_HAS_SANCOV_TRACE_PC - select SKB_EXTENSIONS + select SKB_EXTENSIONS if NET help KCOV exposes kernel code coverage information in a form suitable for coverage-guided fuzzing (randomized testing). From 0b62660c6a339fd522571c44be18f182178aaea6 Mon Sep 17 00:00:00 2001 From: Vignesh Raghavendra Date: Wed, 11 Nov 2020 16:56:53 +0530 Subject: [PATCH 06/27] serial: 8250: 8250_omap: Fix unused variable warning commit 6f991850412963381017cfb0d691cbd4d6a551dc upstream. With commit 439c7183e5b9 ("serial: 8250: 8250_omap: Disable RX interrupt after DMA enable"), below warning is seen with W=1 and CONFIG_SERIAL_8250_DMA is disabled: drivers/tty/serial/8250/8250_omap.c:1199:42: warning: unused variable 'k3_soc_devices' [-Wunused-const-variable] Fix this by moving the code using k3_soc_devices array to omap_serial_fill_features_erratas() that handles other errata flags as well. Fixes: 439c7183e5b9 ("serial: 8250: 8250_omap: Disable RX interrupt after DMA enable") Reported-by: kernel test robot Signed-off-by: Vignesh Raghavendra Link: https://lore.kernel.org/r/20201111112653.2710-2-vigneshr@ti.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_omap.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index ad0549dac7d7..c37468887fd2 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -538,6 +538,11 @@ static void omap_8250_pm(struct uart_port *port, unsigned int state, static void omap_serial_fill_features_erratas(struct uart_8250_port *up, struct omap8250_priv *priv) { + const struct soc_device_attribute k3_soc_devices[] = { + { .family = "AM65X", }, + { .family = "J721E", .revision = "SR1.0" }, + { /* sentinel */ } + }; u32 mvr, scheme; u16 revision, major, minor; @@ -585,6 +590,14 @@ static void omap_serial_fill_features_erratas(struct uart_8250_port *up, default: break; } + + /* + * AM65x SR1.0, AM65x SR2.0 and J721e SR1.0 don't + * don't have RHR_IT_DIS bit in IER2 register. So drop to flag + * to enable errata workaround. + */ + if (soc_device_match(k3_soc_devices)) + priv->habit &= ~UART_HAS_RHR_IT_DIS; } static void omap8250_uart_qos_work(struct work_struct *work) @@ -1208,12 +1221,6 @@ static int omap8250_no_handle_irq(struct uart_port *port) return 0; } -static const struct soc_device_attribute k3_soc_devices[] = { - { .family = "AM65X", }, - { .family = "J721E", .revision = "SR1.0" }, - { /* sentinel */ } -}; - static struct omap8250_dma_params am654_dma = { .rx_size = SZ_2K, .rx_trigger = 1, @@ -1419,13 +1426,6 @@ static int omap8250_probe(struct platform_device *pdev) up.dma->rxconf.src_maxburst = RX_TRIGGER; up.dma->txconf.dst_maxburst = TX_TRIGGER; } - - /* - * AM65x SR1.0, AM65x SR2.0 and J721e SR1.0 don't - * don't have RHR_IT_DIS bit in IER2 register - */ - if (soc_device_match(k3_soc_devices)) - priv->habit &= ~UART_HAS_RHR_IT_DIS; } #endif ret = serial8250_register_8250_port(&up); From 0757a883b97022ef50af422697993ee7fc4a1b79 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 16 Nov 2020 13:21:08 -0800 Subject: [PATCH 07/27] net: linux/skbuff.h: combine SKB_EXTENSIONS + KCOV handling commit 97f53a08cba128a724ebbbf34778d3553d559816 upstream. The previous Kconfig patch led to some other build errors as reported by the 0day bot and my own overnight build testing. These are all in when KCOV is enabled but SKB_EXTENSIONS is not enabled, so fix those by combining those conditions in the header file. Fixes: 6370cc3bbd8a ("net: add kcov handle to skb extensions") Fixes: 85ce50d337d1 ("net: kcov: don't select SKB_EXTENSIONS when there is no NET") Signed-off-by: Randy Dunlap Reported-by: kernel test robot Cc: Aleksandr Nogikh Cc: Willem de Bruijn Acked-by: Florian Westphal Link: https://lore.kernel.org/r/20201116212108.32465-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman --- include/linux/skbuff.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 2d01b2bbb746..0a1239819fd2 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -4608,7 +4608,7 @@ static inline void skb_reset_redirect(struct sk_buff *skb) #endif } -#ifdef CONFIG_KCOV +#if IS_ENABLED(CONFIG_KCOV) && IS_ENABLED(CONFIG_SKB_EXTENSIONS) static inline void skb_set_kcov_handle(struct sk_buff *skb, const u64 kcov_handle) { @@ -4636,7 +4636,7 @@ static inline u64 skb_get_kcov_handle(struct sk_buff *skb) static inline void skb_set_kcov_handle(struct sk_buff *skb, const u64 kcov_handle) { } static inline u64 skb_get_kcov_handle(struct sk_buff *skb) { return 0; } -#endif /* CONFIG_KCOV */ +#endif /* CONFIG_KCOV && CONFIG_SKB_EXTENSIONS */ #endif /* __KERNEL__ */ #endif /* _LINUX_SKBUFF_H */ From d24347e2ff1193164224e5c0558e8682e28e91f6 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Tue, 5 Jan 2021 13:02:39 +0100 Subject: [PATCH 08/27] tty: drop termiox user definitions commit c762a2b846b619c0f92f23e2e8e16f70d20df800 upstream. As was concluded in a follow-up discussion of commit e0efb3168d34 (tty: Remove dead termiox code) [1], termiox ioctls never worked, so there is barely anyone using this interface. We can safely remove the user definitions for this never adopted interface. [1] https://lore.kernel.org/lkml/c1c9fc04-02eb-2260-195b-44c357f057c0@kernel.org/t/#u Signed-off-by: Jiri Slaby Link: https://lore.kernel.org/r/20210105120239.28031-12-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman --- include/uapi/linux/termios.h | 15 --------------- 1 file changed, 15 deletions(-) diff --git a/include/uapi/linux/termios.h b/include/uapi/linux/termios.h index 33961d4e4de0..e6da9d4433d1 100644 --- a/include/uapi/linux/termios.h +++ b/include/uapi/linux/termios.h @@ -5,19 +5,4 @@ #include #include -#define NFF 5 - -struct termiox -{ - __u16 x_hflag; - __u16 x_cflag; - __u16 x_rflag[NFF]; - __u16 x_sflag; -}; - -#define RTSXOFF 0x0001 /* RTS flow control on input */ -#define CTSXON 0x0002 /* CTS flow control on output */ -#define DTRXOFF 0x0004 /* DTR flow control on input */ -#define DSRXON 0x0008 /* DCD flow control on output */ - #endif From 554efc9a6138ba72ae09f2c65746d1f8995f045d Mon Sep 17 00:00:00 2001 From: Hayes Wang Date: Fri, 6 Aug 2021 17:15:55 +0800 Subject: [PATCH 09/27] Revert "r8169: avoid link-up interrupt issue on RTL8106e if user enables ASPM" commit 2115d3d482656ea702f7cf308c0ded3500282903 upstream. This reverts commit 1ee8856de82faec9bc8bd0f2308a7f27e30ba207. This is used to re-enable ASPM on RTL8106e, if it is possible. Signed-off-by: Hayes Wang Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- drivers/net/ethernet/realtek/r8169_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c index e690a1b09e98..30be18bac806 100644 --- a/drivers/net/ethernet/realtek/r8169_main.c +++ b/drivers/net/ethernet/realtek/r8169_main.c @@ -3547,6 +3547,7 @@ static void rtl_hw_start_8106(struct rtl8169_private *tp) rtl_eri_write(tp, 0x1b0, ERIAR_MASK_0011, 0x0000); rtl_pcie_state_l2l3_disable(tp); + rtl_hw_aspm_clkreq_enable(tp, true); } DECLARE_RTL_COND(rtl_mac_ocp_e00e_cond) From bc1b5c5f3e3bba6ab1cb1520871b71f0178eb550 Mon Sep 17 00:00:00 2001 From: Suravee Suthikulpanit Date: Tue, 4 May 2021 01:52:36 -0500 Subject: [PATCH 10/27] x86/events/amd/iommu: Fix invalid Perf result due to IOMMU PMC power-gating commit e10de314287c2c14b0e6f0e3e961975ce2f4a83d upstream. On certain AMD platforms, when the IOMMU performance counter source (csource) field is zero, power-gating for the counter is enabled, which prevents write access and returns zero for read access. This can cause invalid perf result especially when event multiplexing is needed (i.e. more number of events than available counters) since the current logic keeps track of the previously read counter value, and subsequently re-program the counter to continue counting the event. With power-gating enabled, we cannot gurantee successful re-programming of the counter. Workaround this issue by : 1. Modifying the ordering of setting/reading counters and enabing/ disabling csources to only access the counter when the csource is set to non-zero. 2. Since AMD IOMMU PMU does not support interrupt mode, the logic can be simplified to always start counting with value zero, and accumulate the counter value when stopping without the need to keep track and reprogram the counter with the previously read counter value. This has been tested on systems with and without power-gating. Fixes: 994d6608efe4 ("iommu/amd: Remove performance counter pre-initialization test") Suggested-by: Alexander Monakov Signed-off-by: Suravee Suthikulpanit Signed-off-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/20210504065236.4415-1-suravee.suthikulpanit@amd.com Signed-off-by: Greg Kroah-Hartman --- arch/x86/events/amd/iommu.c | 47 ++++++++++++++++++++----------------- 1 file changed, 26 insertions(+), 21 deletions(-) diff --git a/arch/x86/events/amd/iommu.c b/arch/x86/events/amd/iommu.c index 6a98a7651621..2da6139b0977 100644 --- a/arch/x86/events/amd/iommu.c +++ b/arch/x86/events/amd/iommu.c @@ -18,8 +18,6 @@ #include "../perf_event.h" #include "iommu.h" -#define COUNTER_SHIFT 16 - /* iommu pmu conf masks */ #define GET_CSOURCE(x) ((x)->conf & 0xFFULL) #define GET_DEVID(x) (((x)->conf >> 8) & 0xFFFFULL) @@ -285,22 +283,31 @@ static void perf_iommu_start(struct perf_event *event, int flags) WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE)); hwc->state = 0; + /* + * To account for power-gating, which prevents write to + * the counter, we need to enable the counter + * before setting up counter register. + */ + perf_iommu_enable_event(event); + if (flags & PERF_EF_RELOAD) { - u64 prev_raw_count = local64_read(&hwc->prev_count); + u64 count = 0; struct amd_iommu *iommu = perf_event_2_iommu(event); + /* + * Since the IOMMU PMU only support counting mode, + * the counter always start with value zero. + */ amd_iommu_pc_set_reg(iommu, hwc->iommu_bank, hwc->iommu_cntr, - IOMMU_PC_COUNTER_REG, &prev_raw_count); + IOMMU_PC_COUNTER_REG, &count); } - perf_iommu_enable_event(event); perf_event_update_userpage(event); - } static void perf_iommu_read(struct perf_event *event) { - u64 count, prev, delta; + u64 count; struct hw_perf_event *hwc = &event->hw; struct amd_iommu *iommu = perf_event_2_iommu(event); @@ -311,14 +318,11 @@ static void perf_iommu_read(struct perf_event *event) /* IOMMU pc counter register is only 48 bits */ count &= GENMASK_ULL(47, 0); - prev = local64_read(&hwc->prev_count); - if (local64_cmpxchg(&hwc->prev_count, prev, count) != prev) - return; - - /* Handle 48-bit counter overflow */ - delta = (count << COUNTER_SHIFT) - (prev << COUNTER_SHIFT); - delta >>= COUNTER_SHIFT; - local64_add(delta, &event->count); + /* + * Since the counter always start with value zero, + * simply just accumulate the count for the event. + */ + local64_add(count, &event->count); } static void perf_iommu_stop(struct perf_event *event, int flags) @@ -328,15 +332,16 @@ static void perf_iommu_stop(struct perf_event *event, int flags) if (hwc->state & PERF_HES_UPTODATE) return; + /* + * To account for power-gating, in which reading the counter would + * return zero, we need to read the register before disabling. + */ + perf_iommu_read(event); + hwc->state |= PERF_HES_UPTODATE; + perf_iommu_disable_event(event); WARN_ON_ONCE(hwc->state & PERF_HES_STOPPED); hwc->state |= PERF_HES_STOPPED; - - if (hwc->state & PERF_HES_UPTODATE) - return; - - perf_iommu_read(event); - hwc->state |= PERF_HES_UPTODATE; } static int perf_iommu_add(struct perf_event *event, int flags) From ceffaa61b5bb5296e07cb7f4f494377eb659058f Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Wed, 11 Aug 2021 22:26:24 +0800 Subject: [PATCH 11/27] blk-mq: fix kernel panic during iterating over flush request commit c2da19ed50554ce52ecbad3655c98371fe58599f upstream. For fixing use-after-free during iterating over requests, we grabbed request's refcount before calling ->fn in commit 2e315dc07df0 ("blk-mq: grab rq->refcount before calling ->fn in blk_mq_tagset_busy_iter"). Turns out this way may cause kernel panic when iterating over one flush request: 1) old flush request's tag is just released, and this tag is reused by one new request, but ->rqs[] isn't updated yet 2) the flush request can be re-used for submitting one new flush command, so blk_rq_init() is called at the same time 3) meantime blk_mq_queue_tag_busy_iter() is called, and old flush request is retrieved from ->rqs[tag]; when blk_mq_put_rq_ref() is called, flush_rq->end_io may not be updated yet, so NULL pointer dereference is triggered in blk_mq_put_rq_ref(). Fix the issue by calling refcount_set(&flush_rq->ref, 1) after flush_rq->end_io is set. So far the only other caller of blk_rq_init() is scsi_ioctl_reset() in which the request doesn't enter block IO stack and the request reference count isn't used, so the change is safe. Fixes: 2e315dc07df0 ("blk-mq: grab rq->refcount before calling ->fn in blk_mq_tagset_busy_iter") Reported-by: "Blank-Burian, Markus, Dr." Tested-by: "Blank-Burian, Markus, Dr." Signed-off-by: Ming Lei Reviewed-by: Christoph Hellwig Reviewed-by: John Garry Link: https://lore.kernel.org/r/20210811142624.618598-1-ming.lei@redhat.com Signed-off-by: Jens Axboe Cc: Yi Zhang Signed-off-by: Greg Kroah-Hartman --- block/blk-core.c | 1 - block/blk-flush.c | 8 ++++++++ 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/block/blk-core.c b/block/blk-core.c index 2d53e2ff48ff..fbc39756f37d 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -121,7 +121,6 @@ void blk_rq_init(struct request_queue *q, struct request *rq) rq->internal_tag = BLK_MQ_NO_TAG; rq->start_time_ns = ktime_get_ns(); rq->part = NULL; - refcount_set(&rq->ref, 1); blk_crypto_rq_set_defaults(rq); } EXPORT_SYMBOL(blk_rq_init); diff --git a/block/blk-flush.c b/block/blk-flush.c index 7ee7e5e8905d..040d9adf8789 100644 --- a/block/blk-flush.c +++ b/block/blk-flush.c @@ -330,6 +330,14 @@ static void blk_kick_flush(struct request_queue *q, struct blk_flush_queue *fq, flush_rq->rq_flags |= RQF_FLUSH_SEQ; flush_rq->rq_disk = first_rq->rq_disk; flush_rq->end_io = flush_end_io; + /* + * Order WRITE ->end_io and WRITE rq->ref, and its pair is the one + * implied in refcount_inc_not_zero() called from + * blk_mq_find_and_get_req(), which orders WRITE/READ flush_rq->ref + * and READ flush_rq->end_io + */ + smp_wmb(); + refcount_set(&flush_rq->ref, 1); blk_flush_queue_rq(flush_rq, false); } From cad6239f5080fdb1acdfb7faeaa8b252125a68d1 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Wed, 18 Aug 2021 09:09:25 +0800 Subject: [PATCH 12/27] blk-mq: fix is_flush_rq commit a9ed27a764156929efe714033edb3e9023c5f321 upstream. is_flush_rq() is called from bt_iter()/bt_tags_iter(), and runs the following check: hctx->fq->flush_rq == req but the passed hctx from bt_iter()/bt_tags_iter() may be NULL because: 1) memory re-order in blk_mq_rq_ctx_init(): rq->mq_hctx = data->hctx; ... refcount_set(&rq->ref, 1); OR 2) tag re-use and ->rqs[] isn't updated with new request. Fix the issue by re-writing is_flush_rq() as: return rq->end_io == flush_end_io; which turns out simpler to follow and immune to data race since we have ordered WRITE rq->end_io and refcount_set(&rq->ref, 1). Fixes: 2e315dc07df0 ("blk-mq: grab rq->refcount before calling ->fn in blk_mq_tagset_busy_iter") Cc: "Blank-Burian, Markus, Dr." Cc: Yufen Yu Signed-off-by: Ming Lei Link: https://lore.kernel.org/r/20210818010925.607383-1-ming.lei@redhat.com Signed-off-by: Jens Axboe Cc: Yi Zhang Signed-off-by: Greg Kroah-Hartman --- block/blk-flush.c | 5 +++++ block/blk-mq.c | 2 +- block/blk.h | 6 +----- 3 files changed, 7 insertions(+), 6 deletions(-) diff --git a/block/blk-flush.c b/block/blk-flush.c index 040d9adf8789..70f1d02135ed 100644 --- a/block/blk-flush.c +++ b/block/blk-flush.c @@ -263,6 +263,11 @@ static void flush_end_io(struct request *flush_rq, blk_status_t error) spin_unlock_irqrestore(&fq->mq_flush_lock, flags); } +bool is_flush_rq(struct request *rq) +{ + return rq->end_io == flush_end_io; +} + /** * blk_kick_flush - consider issuing flush request * @q: request_queue being kicked diff --git a/block/blk-mq.c b/block/blk-mq.c index 044d0e3a15ad..94436e0a508c 100644 --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -929,7 +929,7 @@ static bool blk_mq_req_expired(struct request *rq, unsigned long *next) void blk_mq_put_rq_ref(struct request *rq) { - if (is_flush_rq(rq, rq->mq_hctx)) + if (is_flush_rq(rq)) rq->end_io(rq, 0); else if (refcount_dec_and_test(&rq->ref)) __blk_mq_free_request(rq); diff --git a/block/blk.h b/block/blk.h index dfab98465db9..ecfd523c68d0 100644 --- a/block/blk.h +++ b/block/blk.h @@ -44,11 +44,7 @@ static inline void __blk_get_queue(struct request_queue *q) kobject_get(&q->kobj); } -static inline bool -is_flush_rq(struct request *req, struct blk_mq_hw_ctx *hctx) -{ - return hctx->fq->flush_rq == req; -} +bool is_flush_rq(struct request *req); struct blk_flush_queue *blk_alloc_flush_queue(int node, int cmd_size, gfp_t flags); From 3fda454f909cda927a02a75e48ef5ee49497f120 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 9 Sep 2021 16:03:35 +0200 Subject: [PATCH 13/27] netfilter: nftables: avoid potential overflows on 32bit arches commit 6c8774a94e6ad26f29ef103c8671f55c255c6201 upstream. User space could ask for very large hash tables, we need to make sure our size computations wont overflow. nf_tables_newset() needs to double check the u64 size will fit into size_t field. Fixes: 0ed6389c483d ("netfilter: nf_tables: rename set implementations") Signed-off-by: Eric Dumazet Signed-off-by: Pablo Neira Ayuso Signed-off-by: Florian Westphal Signed-off-by: Greg Kroah-Hartman --- net/netfilter/nf_tables_api.c | 7 +++++-- net/netfilter/nft_set_hash.c | 10 +++++----- 2 files changed, 10 insertions(+), 7 deletions(-) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index e34d05cc5754..947d52cff582 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -4115,6 +4115,7 @@ static int nf_tables_newset(struct net *net, struct sock *nlsk, struct nft_table *table; struct nft_set *set; struct nft_ctx ctx; + size_t alloc_size; char *name; u64 size; u64 timeout; @@ -4263,8 +4264,10 @@ static int nf_tables_newset(struct net *net, struct sock *nlsk, size = 0; if (ops->privsize != NULL) size = ops->privsize(nla, &desc); - - set = kvzalloc(sizeof(*set) + size + udlen, GFP_KERNEL); + alloc_size = sizeof(*set) + size + udlen; + if (alloc_size < size) + return -ENOMEM; + set = kvzalloc(alloc_size, GFP_KERNEL); if (!set) return -ENOMEM; diff --git a/net/netfilter/nft_set_hash.c b/net/netfilter/nft_set_hash.c index d7083bcb20e8..858c8d4d659a 100644 --- a/net/netfilter/nft_set_hash.c +++ b/net/netfilter/nft_set_hash.c @@ -604,7 +604,7 @@ static u64 nft_hash_privsize(const struct nlattr * const nla[], const struct nft_set_desc *desc) { return sizeof(struct nft_hash) + - nft_hash_buckets(desc->size) * sizeof(struct hlist_head); + (u64)nft_hash_buckets(desc->size) * sizeof(struct hlist_head); } static int nft_hash_init(const struct nft_set *set, @@ -644,8 +644,8 @@ static bool nft_hash_estimate(const struct nft_set_desc *desc, u32 features, return false; est->size = sizeof(struct nft_hash) + - nft_hash_buckets(desc->size) * sizeof(struct hlist_head) + - desc->size * sizeof(struct nft_hash_elem); + (u64)nft_hash_buckets(desc->size) * sizeof(struct hlist_head) + + (u64)desc->size * sizeof(struct nft_hash_elem); est->lookup = NFT_SET_CLASS_O_1; est->space = NFT_SET_CLASS_O_N; @@ -662,8 +662,8 @@ static bool nft_hash_fast_estimate(const struct nft_set_desc *desc, u32 features return false; est->size = sizeof(struct nft_hash) + - nft_hash_buckets(desc->size) * sizeof(struct hlist_head) + - desc->size * sizeof(struct nft_hash_elem); + (u64)nft_hash_buckets(desc->size) * sizeof(struct hlist_head) + + (u64)desc->size * sizeof(struct nft_hash_elem); est->lookup = NFT_SET_CLASS_O_1; est->space = NFT_SET_CLASS_O_N; From 36983fc2f87ea3b74a33bf460c9ee7329735b7b5 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Thu, 9 Sep 2021 16:03:36 +0200 Subject: [PATCH 14/27] netfilter: nf_tables: initialize set before expression setup commit ad9f151e560b016b6ad3280b48e42fa11e1a5440 upstream. nft_set_elem_expr_alloc() needs an initialized set if expression sets on the NFT_EXPR_GC flag. Move set fields initialization before expression setup. [4512935.019450] ================================================================== [4512935.019456] BUG: KASAN: null-ptr-deref in nft_set_elem_expr_alloc+0x84/0xd0 [nf_tables] [4512935.019487] Read of size 8 at addr 0000000000000070 by task nft/23532 [4512935.019494] CPU: 1 PID: 23532 Comm: nft Not tainted 5.12.0-rc4+ #48 [...] [4512935.019502] Call Trace: [4512935.019505] dump_stack+0x89/0xb4 [4512935.019512] ? nft_set_elem_expr_alloc+0x84/0xd0 [nf_tables] [4512935.019536] ? nft_set_elem_expr_alloc+0x84/0xd0 [nf_tables] [4512935.019560] kasan_report.cold.12+0x5f/0xd8 [4512935.019566] ? nft_set_elem_expr_alloc+0x84/0xd0 [nf_tables] [4512935.019590] nft_set_elem_expr_alloc+0x84/0xd0 [nf_tables] [4512935.019615] nf_tables_newset+0xc7f/0x1460 [nf_tables] Reported-by: syzbot+ce96ca2b1d0b37c6422d@syzkaller.appspotmail.com Fixes: 65038428b2c6 ("netfilter: nf_tables: allow to specify stateful expression in set definition") Signed-off-by: Pablo Neira Ayuso Signed-off-by: Florian Westphal Signed-off-by: Greg Kroah-Hartman --- net/netfilter/nf_tables_api.c | 46 ++++++++++++++++++----------------- 1 file changed, 24 insertions(+), 22 deletions(-) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 947d52cff582..3942a29413a4 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -4280,15 +4280,7 @@ static int nf_tables_newset(struct net *net, struct sock *nlsk, err = nf_tables_set_alloc_name(&ctx, set, name); kfree(name); if (err < 0) - goto err_set_alloc_name; - - if (nla[NFTA_SET_EXPR]) { - expr = nft_set_elem_expr_alloc(&ctx, set, nla[NFTA_SET_EXPR]); - if (IS_ERR(expr)) { - err = PTR_ERR(expr); - goto err_set_alloc_name; - } - } + goto err_set_name; udata = NULL; if (udlen) { @@ -4299,21 +4291,19 @@ static int nf_tables_newset(struct net *net, struct sock *nlsk, INIT_LIST_HEAD(&set->bindings); set->table = table; write_pnet(&set->net, net); - set->ops = ops; + set->ops = ops; set->ktype = ktype; - set->klen = desc.klen; + set->klen = desc.klen; set->dtype = dtype; set->objtype = objtype; - set->dlen = desc.dlen; - set->expr = expr; + set->dlen = desc.dlen; set->flags = flags; - set->size = desc.size; + set->size = desc.size; set->policy = policy; - set->udlen = udlen; - set->udata = udata; + set->udlen = udlen; + set->udata = udata; set->timeout = timeout; set->gc_int = gc_int; - set->handle = nf_tables_alloc_handle(table); set->field_count = desc.field_count; for (i = 0; i < desc.field_count; i++) @@ -4323,20 +4313,32 @@ static int nf_tables_newset(struct net *net, struct sock *nlsk, if (err < 0) goto err_set_init; + if (nla[NFTA_SET_EXPR]) { + expr = nft_set_elem_expr_alloc(&ctx, set, nla[NFTA_SET_EXPR]); + if (IS_ERR(expr)) { + err = PTR_ERR(expr); + goto err_set_expr_alloc; + } + + set->expr = expr; + } + + set->handle = nf_tables_alloc_handle(table); + err = nft_trans_set_add(&ctx, NFT_MSG_NEWSET, set); if (err < 0) - goto err_set_trans; + goto err_set_expr_alloc; list_add_tail_rcu(&set->list, &table->sets); table->use++; return 0; -err_set_trans: +err_set_expr_alloc: + if (set->expr) + nft_expr_destroy(&ctx, set->expr); + ops->destroy(set); err_set_init: - if (expr) - nft_expr_destroy(&ctx, expr); -err_set_alloc_name: kfree(set->name); err_set_name: kvfree(set); From e51ff3ffc316377cca21de8b80404eed0c37b3c3 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Thu, 9 Sep 2021 16:03:37 +0200 Subject: [PATCH 15/27] netfilter: nftables: clone set element expression template commit 4d8f9065830e526c83199186c5f56a6514f457d2 upstream. memcpy() breaks when using connlimit in set elements. Use nft_expr_clone() to initialize the connlimit expression list, otherwise connlimit garbage collector crashes when walking on the list head copy. [ 493.064656] Workqueue: events_power_efficient nft_rhash_gc [nf_tables] [ 493.064685] RIP: 0010:find_or_evict+0x5a/0x90 [nf_conncount] [ 493.064694] Code: 2b 43 40 83 f8 01 77 0d 48 c7 c0 f5 ff ff ff 44 39 63 3c 75 df 83 6d 18 01 48 8b 43 08 48 89 de 48 8b 13 48 8b 3d ee 2f 00 00 <48> 89 42 08 48 89 10 48 b8 00 01 00 00 00 00 ad de 48 89 03 48 83 [ 493.064699] RSP: 0018:ffffc90000417dc0 EFLAGS: 00010297 [ 493.064704] RAX: 0000000000000000 RBX: ffff888134f38410 RCX: 0000000000000000 [ 493.064708] RDX: 0000000000000000 RSI: ffff888134f38410 RDI: ffff888100060cc0 [ 493.064711] RBP: ffff88812ce594a8 R08: ffff888134f38438 R09: 00000000ebb9025c [ 493.064714] R10: ffffffff8219f838 R11: 0000000000000017 R12: 0000000000000001 [ 493.064718] R13: ffffffff82146740 R14: ffff888134f38410 R15: 0000000000000000 [ 493.064721] FS: 0000000000000000(0000) GS:ffff88840e440000(0000) knlGS:0000000000000000 [ 493.064725] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 493.064729] CR2: 0000000000000008 CR3: 00000001330aa002 CR4: 00000000001706e0 [ 493.064733] Call Trace: [ 493.064737] nf_conncount_gc_list+0x8f/0x150 [nf_conncount] [ 493.064746] nft_rhash_gc+0x106/0x390 [nf_tables] Reported-by: Laura Garcia Liebana Fixes: 409444522976 ("netfilter: nf_tables: add elements with stateful expressions") Signed-off-by: Pablo Neira Ayuso Signed-off-by: Florian Westphal Signed-off-by: Greg Kroah-Hartman --- net/netfilter/nf_tables_api.c | 36 +++++++++++++++++++++++++++-------- 1 file changed, 28 insertions(+), 8 deletions(-) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 3942a29413a4..2b5f97e1d40b 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -5150,6 +5150,24 @@ static void nf_tables_set_elem_destroy(const struct nft_ctx *ctx, kfree(elem); } +static int nft_set_elem_expr_setup(struct nft_ctx *ctx, + const struct nft_set_ext *ext, + struct nft_expr *expr) +{ + struct nft_expr *elem_expr = nft_set_ext_expr(ext); + int err; + + if (expr == NULL) + return 0; + + err = nft_expr_clone(elem_expr, expr); + if (err < 0) + return -ENOMEM; + + nft_expr_destroy(ctx, expr); + return 0; +} + static int nft_add_set_elem(struct nft_ctx *ctx, struct nft_set *set, const struct nlattr *attr, u32 nlmsg_flags) { @@ -5352,15 +5370,17 @@ static int nft_add_set_elem(struct nft_ctx *ctx, struct nft_set *set, *nft_set_ext_obj(ext) = obj; obj->use++; } - if (expr) { - memcpy(nft_set_ext_expr(ext), expr, expr->ops->size); - kfree(expr); - expr = NULL; - } + + err = nft_set_elem_expr_setup(ctx, ext, expr); + if (err < 0) + goto err_elem_expr; + expr = NULL; trans = nft_trans_elem_alloc(ctx, NFT_MSG_NEWSETELEM, set); - if (trans == NULL) - goto err_trans; + if (trans == NULL) { + err = -ENOMEM; + goto err_elem_expr; + } ext->genmask = nft_genmask_cur(ctx->net) | NFT_SET_ELEM_BUSY_MASK; err = set->ops->insert(ctx->net, set, &elem, &ext2); @@ -5404,7 +5424,7 @@ err_set_full: set->ops->remove(ctx->net, set, &elem); err_element_clash: kfree(trans); -err_trans: +err_elem_expr: if (obj) obj->use--; From 798679af7978bf4d9df1a907fd4100d4c1f90c03 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Tue, 11 May 2021 23:22:36 +0800 Subject: [PATCH 16/27] blk-mq: clearing flush request reference in tags->rqs[] commit 364b61818f65045479e42e76ed8dd6f051778280 upstream. Before we free request queue, clearing flush request reference in tags->rqs[], so that potential UAF can be avoided. Based on one patch written by David Jeffery. Tested-by: John Garry Reviewed-by: Bart Van Assche Reviewed-by: David Jeffery Signed-off-by: Ming Lei Link: https://lore.kernel.org/r/20210511152236.763464-5-ming.lei@redhat.com Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman --- block/blk-mq.c | 35 ++++++++++++++++++++++++++++++++++- 1 file changed, 34 insertions(+), 1 deletion(-) diff --git a/block/blk-mq.c b/block/blk-mq.c index 94436e0a508c..9e3fedbaa644 100644 --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -2589,16 +2589,49 @@ static void blk_mq_remove_cpuhp(struct blk_mq_hw_ctx *hctx) &hctx->cpuhp_dead); } +/* + * Before freeing hw queue, clearing the flush request reference in + * tags->rqs[] for avoiding potential UAF. + */ +static void blk_mq_clear_flush_rq_mapping(struct blk_mq_tags *tags, + unsigned int queue_depth, struct request *flush_rq) +{ + int i; + unsigned long flags; + + /* The hw queue may not be mapped yet */ + if (!tags) + return; + + WARN_ON_ONCE(refcount_read(&flush_rq->ref) != 0); + + for (i = 0; i < queue_depth; i++) + cmpxchg(&tags->rqs[i], flush_rq, NULL); + + /* + * Wait until all pending iteration is done. + * + * Request reference is cleared and it is guaranteed to be observed + * after the ->lock is released. + */ + spin_lock_irqsave(&tags->lock, flags); + spin_unlock_irqrestore(&tags->lock, flags); +} + /* hctx->ctxs will be freed in queue's release handler */ static void blk_mq_exit_hctx(struct request_queue *q, struct blk_mq_tag_set *set, struct blk_mq_hw_ctx *hctx, unsigned int hctx_idx) { + struct request *flush_rq = hctx->fq->flush_rq; + if (blk_mq_hw_queue_mapped(hctx)) blk_mq_tag_idle(hctx); + blk_mq_clear_flush_rq_mapping(set->tags[hctx_idx], + set->queue_depth, flush_rq); if (set->ops->exit_request) - set->ops->exit_request(set, hctx->fq->flush_rq, hctx_idx); + set->ops->exit_request(set, flush_rq, hctx_idx); if (set->ops->exit_hctx) set->ops->exit_hctx(hctx, hctx_idx); From c3fd7b0b9aa1403becf5dc6ba0b9d32098a73b5d Mon Sep 17 00:00:00 2001 From: Alexander Tsoy Date: Tue, 31 Aug 2021 03:25:31 +0300 Subject: [PATCH 17/27] ALSA: usb-audio: Add registration quirk for JBL Quantum 800 commit c8b177b6e3a005bd8fb0395a4bc5db3470301c28 upstream. Add another device ID for JBL Quantum 800. It requires the same quirk as other JBL Quantum devices. Signed-off-by: Alexander Tsoy Cc: Link: https://lore.kernel.org/r/20210831002531.116957-1-alexander@tsoy.me Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman --- sound/usb/quirks.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 33d185b62a76..a45b27a2ed4e 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1896,6 +1896,7 @@ static const struct registration_quirk registration_quirks[] = { REG_QUIRK_ENTRY(0x0951, 0x16ed, 2), /* Kingston HyperX Cloud Alpha S */ REG_QUIRK_ENTRY(0x0951, 0x16ea, 2), /* Kingston HyperX Cloud Flight S */ REG_QUIRK_ENTRY(0x0ecb, 0x1f46, 2), /* JBL Quantum 600 */ + REG_QUIRK_ENTRY(0x0ecb, 0x1f47, 2), /* JBL Quantum 800 */ REG_QUIRK_ENTRY(0x0ecb, 0x2039, 2), /* JBL Quantum 400 */ REG_QUIRK_ENTRY(0x0ecb, 0x203c, 2), /* JBL Quantum 600 */ REG_QUIRK_ENTRY(0x0ecb, 0x203e, 2), /* JBL Quantum 800 */ From d544c9a2190a4beff995be6a74a750dd5a8d7676 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Fri, 27 Aug 2021 15:32:27 +0900 Subject: [PATCH 18/27] usb: host: xhci-rcar: Don't reload firmware after the completion commit 57f3ffdc11143f56f1314972fe86fe17a0dcde85 upstream. According to the datasheet, "Upon the completion of FW Download, there is no need to write or reload FW.". Otherwise, it's possible to cause unexpected behaviors. So, adds such a condition. Fixes: 4ac8918f3a73 ("usb: host: xhci-plat: add support for the R-Car H2 and M2 xHCI controllers") Cc: stable@vger.kernel.org # v3.17+ Signed-off-by: Yoshihiro Shimoda Link: https://lore.kernel.org/r/20210827063227.81990-1-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-rcar.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/host/xhci-rcar.c b/drivers/usb/host/xhci-rcar.c index 1bc4fe7b8c75..9888ba7d85b6 100644 --- a/drivers/usb/host/xhci-rcar.c +++ b/drivers/usb/host/xhci-rcar.c @@ -134,6 +134,13 @@ static int xhci_rcar_download_firmware(struct usb_hcd *hcd) const struct soc_device_attribute *attr; const char *firmware_name; + /* + * According to the datasheet, "Upon the completion of FW Download, + * there is no need to write or reload FW". + */ + if (readl(regs + RCAR_USB3_DL_CTRL) & RCAR_USB3_DL_CTRL_FW_SUCCESS) + return 0; + attr = soc_device_match(rcar_quirks_match); if (attr) quirks = (uintptr_t)attr->data; From c75e2fd0d3c5248d7211649a508fc32dcfc11e2e Mon Sep 17 00:00:00 2001 From: Chunfeng Yun Date: Fri, 13 Aug 2021 14:30:51 +0800 Subject: [PATCH 19/27] usb: gadget: tegra-xudc: fix the wrong mult value for HS isoc or intr commit eeb0cfb6b2b6b731902e68af641e30bd31be3c7b upstream. usb_endpoint_maxp() only returns the bit[10:0] of wMaxPacketSize of endpoint descriptor, not includes bit[12:11] anymore, so use usb_endpoint_maxp_mult() instead. Meanwhile no need AND 0x7ff when get maxp, remove it. Fixes: 49db427232fe ("usb: gadget: Add UDC driver for tegra XUSB device mode controller") Cc: stable@vger.kernel.org Acked-by: Felipe Balbi Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/1628836253-7432-5-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/udc/tegra-xudc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/udc/tegra-xudc.c b/drivers/usb/gadget/udc/tegra-xudc.c index f3f112b08c9b..57ee72fead45 100644 --- a/drivers/usb/gadget/udc/tegra-xudc.c +++ b/drivers/usb/gadget/udc/tegra-xudc.c @@ -1610,7 +1610,7 @@ static void tegra_xudc_ep_context_setup(struct tegra_xudc_ep *ep) u16 maxpacket, maxburst = 0, esit = 0; u32 val; - maxpacket = usb_endpoint_maxp(desc) & 0x7ff; + maxpacket = usb_endpoint_maxp(desc); if (xudc->gadget.speed == USB_SPEED_SUPER) { if (!usb_endpoint_xfer_control(desc)) maxburst = comp_desc->bMaxBurst; @@ -1621,7 +1621,7 @@ static void tegra_xudc_ep_context_setup(struct tegra_xudc_ep *ep) (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc))) { if (xudc->gadget.speed == USB_SPEED_HIGH) { - maxburst = (usb_endpoint_maxp(desc) >> 11) & 0x3; + maxburst = usb_endpoint_maxp_mult(desc) - 1; if (maxburst == 0x3) { dev_warn(xudc->dev, "invalid endpoint maxburst\n"); From 147819723c74fe6ad4a5171c7fa90fd2753ab72b Mon Sep 17 00:00:00 2001 From: Chunfeng Yun Date: Fri, 13 Aug 2021 14:30:47 +0800 Subject: [PATCH 20/27] usb: mtu3: restore HS function when set SS/SSP commit e88f28514065a6c48aadc367efb0ef6378a01543 upstream. Due to HS function is disabled when set as FS, need restore it when set as SS/SSP. Fixes: dc4c1aa7eae9 ("usb: mtu3: add ->udc_set_speed()") Cc: stable@vger.kernel.org Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/1628836253-7432-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/mtu3/mtu3_core.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c index b3b459937566..3d328dfdbb5e 100644 --- a/drivers/usb/mtu3/mtu3_core.c +++ b/drivers/usb/mtu3/mtu3_core.c @@ -227,11 +227,13 @@ void mtu3_set_speed(struct mtu3 *mtu, enum usb_device_speed speed) mtu3_setbits(mbase, U3D_POWER_MANAGEMENT, HS_ENABLE); break; case USB_SPEED_SUPER: + mtu3_setbits(mbase, U3D_POWER_MANAGEMENT, HS_ENABLE); mtu3_clrbits(mtu->ippc_base, SSUSB_U3_CTRL(0), SSUSB_U3_PORT_SSP_SPEED); break; case USB_SPEED_SUPER_PLUS: - mtu3_setbits(mtu->ippc_base, SSUSB_U3_CTRL(0), + mtu3_setbits(mbase, U3D_POWER_MANAGEMENT, HS_ENABLE); + mtu3_setbits(mtu->ippc_base, SSUSB_U3_CTRL(0), SSUSB_U3_PORT_SSP_SPEED); break; default: From 8a4439aaf4f729e4b4a76cd93e6b7792499f1728 Mon Sep 17 00:00:00 2001 From: Chunfeng Yun Date: Fri, 13 Aug 2021 14:30:48 +0800 Subject: [PATCH 21/27] usb: mtu3: use @mult for HS isoc or intr commit fd7cb394ec7efccc3985feb0978cee4d352e1817 upstream. For HS isoc or intr, should use @mult but not @burst to save mult value. Fixes: 4d79e042ed8b ("usb: mtu3: add support for usb3.1 IP") Cc: stable@vger.kernel.org Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/1628836253-7432-2-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/mtu3/mtu3_gadget.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/mtu3/mtu3_gadget.c b/drivers/usb/mtu3/mtu3_gadget.c index 38f17d66d5bc..b138783c5687 100644 --- a/drivers/usb/mtu3/mtu3_gadget.c +++ b/drivers/usb/mtu3/mtu3_gadget.c @@ -92,7 +92,7 @@ static int mtu3_ep_enable(struct mtu3_ep *mep) usb_endpoint_xfer_int(desc)) { interval = desc->bInterval; interval = clamp_val(interval, 1, 16) - 1; - burst = (max_packet & GENMASK(12, 11)) >> 11; + mult = (max_packet & GENMASK(12, 11)) >> 11; } break; default: From 30e6e9f8bf2c4803d759d58910f9e022f76280ce Mon Sep 17 00:00:00 2001 From: Chunfeng Yun Date: Fri, 13 Aug 2021 14:30:49 +0800 Subject: [PATCH 22/27] usb: mtu3: fix the wrong HS mult value commit 44e4439d8f9f8d0e9da767d1f31e7c211081feca upstream. usb_endpoint_maxp() returns actual max packet size, @mult will always be zero, fix it by using usb_endpoint_maxp_mult() instead to get mult. Fixes: 4d79e042ed8b ("usb: mtu3: add support for usb3.1 IP") Cc: stable@vger.kernel.org Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/1628836253-7432-3-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/mtu3/mtu3_gadget.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/usb/mtu3/mtu3_gadget.c b/drivers/usb/mtu3/mtu3_gadget.c index b138783c5687..0b3aa7c65857 100644 --- a/drivers/usb/mtu3/mtu3_gadget.c +++ b/drivers/usb/mtu3/mtu3_gadget.c @@ -64,14 +64,12 @@ static int mtu3_ep_enable(struct mtu3_ep *mep) u32 interval = 0; u32 mult = 0; u32 burst = 0; - int max_packet; int ret; desc = mep->desc; comp_desc = mep->comp_desc; mep->type = usb_endpoint_type(desc); - max_packet = usb_endpoint_maxp(desc); - mep->maxp = max_packet & GENMASK(10, 0); + mep->maxp = usb_endpoint_maxp(desc); switch (mtu->g.speed) { case USB_SPEED_SUPER: @@ -92,7 +90,7 @@ static int mtu3_ep_enable(struct mtu3_ep *mep) usb_endpoint_xfer_int(desc)) { interval = desc->bInterval; interval = clamp_val(interval, 1, 16) - 1; - mult = (max_packet & GENMASK(12, 11)) >> 11; + mult = usb_endpoint_maxp_mult(desc) - 1; } break; default: From 3f7f1baf7045c6a418d5858de23e9f5c6c58d5ff Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Fri, 20 Aug 2021 15:34:59 +0300 Subject: [PATCH 23/27] xhci: fix even more unsafe memory usage in xhci tracing commit 4843b4b5ec64b875a5e334f280508f1f75e7d3e4 upstream. Removes static char buffer usage in the following decode functions: xhci_decode_ctrl_ctx() xhci_decode_slot_context() xhci_decode_usbsts() xhci_decode_doorbell() xhci_decode_ep_context() Caller must provide a buffer to use. In tracing use __get_str() as recommended to pass buffer. Minor changes are needed in other xhci code as these functions are also used elsewhere Cc: Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20210820123503.2605901-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-debugfs.c | 8 ++++++-- drivers/usb/host/xhci-ring.c | 3 ++- drivers/usb/host/xhci-trace.h | 18 +++++++++++------- drivers/usb/host/xhci.h | 21 ++++++++------------- 4 files changed, 27 insertions(+), 23 deletions(-) diff --git a/drivers/usb/host/xhci-debugfs.c b/drivers/usb/host/xhci-debugfs.c index 2c0fda57869e..d2c10ce38ef4 100644 --- a/drivers/usb/host/xhci-debugfs.c +++ b/drivers/usb/host/xhci-debugfs.c @@ -260,11 +260,13 @@ static int xhci_slot_context_show(struct seq_file *s, void *unused) struct xhci_slot_ctx *slot_ctx; struct xhci_slot_priv *priv = s->private; struct xhci_virt_device *dev = priv->dev; + char str[XHCI_MSG_MAX]; xhci = hcd_to_xhci(bus_to_hcd(dev->udev->bus)); slot_ctx = xhci_get_slot_ctx(xhci, dev->out_ctx); seq_printf(s, "%pad: %s\n", &dev->out_ctx->dma, - xhci_decode_slot_context(le32_to_cpu(slot_ctx->dev_info), + xhci_decode_slot_context(str, + le32_to_cpu(slot_ctx->dev_info), le32_to_cpu(slot_ctx->dev_info2), le32_to_cpu(slot_ctx->tt_info), le32_to_cpu(slot_ctx->dev_state))); @@ -280,6 +282,7 @@ static int xhci_endpoint_context_show(struct seq_file *s, void *unused) struct xhci_ep_ctx *ep_ctx; struct xhci_slot_priv *priv = s->private; struct xhci_virt_device *dev = priv->dev; + char str[XHCI_MSG_MAX]; xhci = hcd_to_xhci(bus_to_hcd(dev->udev->bus)); @@ -287,7 +290,8 @@ static int xhci_endpoint_context_show(struct seq_file *s, void *unused) ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index); dma = dev->out_ctx->dma + (ep_index + 1) * CTX_SIZE(xhci->hcc_params); seq_printf(s, "%pad: %s\n", &dma, - xhci_decode_ep_context(le32_to_cpu(ep_ctx->ep_info), + xhci_decode_ep_context(str, + le32_to_cpu(ep_ctx->ep_info), le32_to_cpu(ep_ctx->ep_info2), le64_to_cpu(ep_ctx->deq), le32_to_cpu(ep_ctx->tx_info))); diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 53059ee957ad..dc2068e3bedb 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1005,6 +1005,7 @@ void xhci_stop_endpoint_command_watchdog(struct timer_list *t) struct xhci_hcd *xhci = ep->xhci; unsigned long flags; u32 usbsts; + char str[XHCI_MSG_MAX]; spin_lock_irqsave(&xhci->lock, flags); @@ -1018,7 +1019,7 @@ void xhci_stop_endpoint_command_watchdog(struct timer_list *t) usbsts = readl(&xhci->op_regs->status); xhci_warn(xhci, "xHCI host not responding to stop endpoint command.\n"); - xhci_warn(xhci, "USBSTS:%s\n", xhci_decode_usbsts(usbsts)); + xhci_warn(xhci, "USBSTS:%s\n", xhci_decode_usbsts(str, usbsts)); ep->ep_state &= ~EP_STOP_CMD_PENDING; diff --git a/drivers/usb/host/xhci-trace.h b/drivers/usb/host/xhci-trace.h index 627abd236dbe..365cadf284d4 100644 --- a/drivers/usb/host/xhci-trace.h +++ b/drivers/usb/host/xhci-trace.h @@ -323,6 +323,7 @@ DECLARE_EVENT_CLASS(xhci_log_ep_ctx, __field(u32, info2) __field(u64, deq) __field(u32, tx_info) + __dynamic_array(char, str, XHCI_MSG_MAX) ), TP_fast_assign( __entry->info = le32_to_cpu(ctx->ep_info); @@ -330,8 +331,8 @@ DECLARE_EVENT_CLASS(xhci_log_ep_ctx, __entry->deq = le64_to_cpu(ctx->deq); __entry->tx_info = le32_to_cpu(ctx->tx_info); ), - TP_printk("%s", xhci_decode_ep_context(__entry->info, - __entry->info2, __entry->deq, __entry->tx_info) + TP_printk("%s", xhci_decode_ep_context(__get_str(str), + __entry->info, __entry->info2, __entry->deq, __entry->tx_info) ) ); @@ -368,6 +369,7 @@ DECLARE_EVENT_CLASS(xhci_log_slot_ctx, __field(u32, info2) __field(u32, tt_info) __field(u32, state) + __dynamic_array(char, str, XHCI_MSG_MAX) ), TP_fast_assign( __entry->info = le32_to_cpu(ctx->dev_info); @@ -375,9 +377,9 @@ DECLARE_EVENT_CLASS(xhci_log_slot_ctx, __entry->tt_info = le64_to_cpu(ctx->tt_info); __entry->state = le32_to_cpu(ctx->dev_state); ), - TP_printk("%s", xhci_decode_slot_context(__entry->info, - __entry->info2, __entry->tt_info, - __entry->state) + TP_printk("%s", xhci_decode_slot_context(__get_str(str), + __entry->info, __entry->info2, + __entry->tt_info, __entry->state) ) ); @@ -432,12 +434,13 @@ DECLARE_EVENT_CLASS(xhci_log_ctrl_ctx, TP_STRUCT__entry( __field(u32, drop) __field(u32, add) + __dynamic_array(char, str, XHCI_MSG_MAX) ), TP_fast_assign( __entry->drop = le32_to_cpu(ctrl_ctx->drop_flags); __entry->add = le32_to_cpu(ctrl_ctx->add_flags); ), - TP_printk("%s", xhci_decode_ctrl_ctx(__entry->drop, __entry->add) + TP_printk("%s", xhci_decode_ctrl_ctx(__get_str(str), __entry->drop, __entry->add) ) ); @@ -555,13 +558,14 @@ DECLARE_EVENT_CLASS(xhci_log_doorbell, TP_STRUCT__entry( __field(u32, slot) __field(u32, doorbell) + __dynamic_array(char, str, XHCI_MSG_MAX) ), TP_fast_assign( __entry->slot = slot; __entry->doorbell = doorbell; ), TP_printk("Ring doorbell for %s", - xhci_decode_doorbell(__entry->slot, __entry->doorbell) + xhci_decode_doorbell(__get_str(str), __entry->slot, __entry->doorbell) ) ); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index c1865a121100..8ff91fd0a5b7 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -2443,10 +2443,9 @@ static inline const char *xhci_decode_trb(u32 field0, u32 field1, u32 field2, return str; } -static inline const char *xhci_decode_ctrl_ctx(unsigned long drop, - unsigned long add) +static inline const char *xhci_decode_ctrl_ctx(char *str, + unsigned long drop, unsigned long add) { - static char str[1024]; unsigned int bit; int ret = 0; @@ -2472,10 +2471,9 @@ static inline const char *xhci_decode_ctrl_ctx(unsigned long drop, return str; } -static inline const char *xhci_decode_slot_context(u32 info, u32 info2, - u32 tt_info, u32 state) +static inline const char *xhci_decode_slot_context(char *str, + u32 info, u32 info2, u32 tt_info, u32 state) { - static char str[1024]; u32 speed; u32 hub; u32 mtt; @@ -2605,9 +2603,8 @@ static inline const char *xhci_decode_portsc(u32 portsc) return str; } -static inline const char *xhci_decode_usbsts(u32 usbsts) +static inline const char *xhci_decode_usbsts(char *str, u32 usbsts) { - static char str[256]; int ret = 0; if (usbsts == ~(u32)0) @@ -2634,9 +2631,8 @@ static inline const char *xhci_decode_usbsts(u32 usbsts) return str; } -static inline const char *xhci_decode_doorbell(u32 slot, u32 doorbell) +static inline const char *xhci_decode_doorbell(char *str, u32 slot, u32 doorbell) { - static char str[256]; u8 ep; u16 stream; int ret; @@ -2703,10 +2699,9 @@ static inline const char *xhci_ep_type_string(u8 type) } } -static inline const char *xhci_decode_ep_context(u32 info, u32 info2, u64 deq, - u32 tx_info) +static inline const char *xhci_decode_ep_context(char *str, u32 info, + u32 info2, u64 deq, u32 tx_info) { - static char str[1024]; int ret; u32 esit; From 1234849353b09b40f6c7189641e22e0e2040e91d Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Fri, 20 Aug 2021 15:34:58 +0300 Subject: [PATCH 24/27] xhci: fix unsafe memory usage in xhci tracing commit cbf286e8ef8337308c259ff5b9ce2e74d403be5a upstream. Removes static char buffer usage in the following decode functions: xhci_decode_trb() xhci_decode_ptortsc() Caller must provide a buffer to use. In tracing use __get_str() as recommended to pass buffer. Minor chanes are needed in xhci debugfs code as these functions are also used there. Changes include moving XHCI_MSG_MAX definititon from xhci-trace.h to xhci.h Cc: Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20210820123503.2605901-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-debugfs.c | 6 ++-- drivers/usb/host/xhci-trace.h | 8 ++--- drivers/usb/host/xhci.h | 52 ++++++++++++++++++--------------- 3 files changed, 36 insertions(+), 30 deletions(-) diff --git a/drivers/usb/host/xhci-debugfs.c b/drivers/usb/host/xhci-debugfs.c index d2c10ce38ef4..dc832ddf7033 100644 --- a/drivers/usb/host/xhci-debugfs.c +++ b/drivers/usb/host/xhci-debugfs.c @@ -198,12 +198,13 @@ static void xhci_ring_dump_segment(struct seq_file *s, int i; dma_addr_t dma; union xhci_trb *trb; + char str[XHCI_MSG_MAX]; for (i = 0; i < TRBS_PER_SEGMENT; i++) { trb = &seg->trbs[i]; dma = seg->dma + i * sizeof(*trb); seq_printf(s, "%pad: %s\n", &dma, - xhci_decode_trb(le32_to_cpu(trb->generic.field[0]), + xhci_decode_trb(str, XHCI_MSG_MAX, le32_to_cpu(trb->generic.field[0]), le32_to_cpu(trb->generic.field[1]), le32_to_cpu(trb->generic.field[2]), le32_to_cpu(trb->generic.field[3]))); @@ -345,9 +346,10 @@ static int xhci_portsc_show(struct seq_file *s, void *unused) { struct xhci_port *port = s->private; u32 portsc; + char str[XHCI_MSG_MAX]; portsc = readl(port->addr); - seq_printf(s, "%s\n", xhci_decode_portsc(portsc)); + seq_printf(s, "%s\n", xhci_decode_portsc(str, portsc)); return 0; } diff --git a/drivers/usb/host/xhci-trace.h b/drivers/usb/host/xhci-trace.h index 365cadf284d4..a5da02077297 100644 --- a/drivers/usb/host/xhci-trace.h +++ b/drivers/usb/host/xhci-trace.h @@ -25,8 +25,6 @@ #include "xhci.h" #include "xhci-dbgcap.h" -#define XHCI_MSG_MAX 500 - DECLARE_EVENT_CLASS(xhci_log_msg, TP_PROTO(struct va_format *vaf), TP_ARGS(vaf), @@ -122,6 +120,7 @@ DECLARE_EVENT_CLASS(xhci_log_trb, __field(u32, field1) __field(u32, field2) __field(u32, field3) + __dynamic_array(char, str, XHCI_MSG_MAX) ), TP_fast_assign( __entry->type = ring->type; @@ -131,7 +130,7 @@ DECLARE_EVENT_CLASS(xhci_log_trb, __entry->field3 = le32_to_cpu(trb->field[3]); ), TP_printk("%s: %s", xhci_ring_type_string(__entry->type), - xhci_decode_trb(__entry->field0, __entry->field1, + xhci_decode_trb(__get_str(str), XHCI_MSG_MAX, __entry->field0, __entry->field1, __entry->field2, __entry->field3) ) ); @@ -526,6 +525,7 @@ DECLARE_EVENT_CLASS(xhci_log_portsc, TP_STRUCT__entry( __field(u32, portnum) __field(u32, portsc) + __dynamic_array(char, str, XHCI_MSG_MAX) ), TP_fast_assign( __entry->portnum = portnum; @@ -533,7 +533,7 @@ DECLARE_EVENT_CLASS(xhci_log_portsc, ), TP_printk("port-%d: %s", __entry->portnum, - xhci_decode_portsc(__entry->portsc) + xhci_decode_portsc(__get_str(str), __entry->portsc) ) ); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 8ff91fd0a5b7..1c97c8d81154 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -22,6 +22,9 @@ #include "xhci-ext-caps.h" #include "pci-quirks.h" +/* max buffer size for trace and debug messages */ +#define XHCI_MSG_MAX 500 + /* xHCI PCI Configuration Registers */ #define XHCI_SBRN_OFFSET (0x60) @@ -2223,15 +2226,14 @@ static inline char *xhci_slot_state_string(u32 state) } } -static inline const char *xhci_decode_trb(u32 field0, u32 field1, u32 field2, - u32 field3) +static inline const char *xhci_decode_trb(char *str, size_t size, + u32 field0, u32 field1, u32 field2, u32 field3) { - static char str[256]; int type = TRB_FIELD_TO_TYPE(field3); switch (type) { case TRB_LINK: - sprintf(str, + snprintf(str, size, "LINK %08x%08x intr %d type '%s' flags %c:%c:%c:%c", field1, field0, GET_INTR_TARGET(field2), xhci_trb_type_string(type), @@ -2248,7 +2250,7 @@ static inline const char *xhci_decode_trb(u32 field0, u32 field1, u32 field2, case TRB_HC_EVENT: case TRB_DEV_NOTE: case TRB_MFINDEX_WRAP: - sprintf(str, + snprintf(str, size, "TRB %08x%08x status '%s' len %d slot %d ep %d type '%s' flags %c:%c", field1, field0, xhci_trb_comp_code_string(GET_COMP_CODE(field2)), @@ -2261,7 +2263,8 @@ static inline const char *xhci_decode_trb(u32 field0, u32 field1, u32 field2, break; case TRB_SETUP: - sprintf(str, "bRequestType %02x bRequest %02x wValue %02x%02x wIndex %02x%02x wLength %d length %d TD size %d intr %d type '%s' flags %c:%c:%c", + snprintf(str, size, + "bRequestType %02x bRequest %02x wValue %02x%02x wIndex %02x%02x wLength %d length %d TD size %d intr %d type '%s' flags %c:%c:%c", field0 & 0xff, (field0 & 0xff00) >> 8, (field0 & 0xff000000) >> 24, @@ -2278,7 +2281,8 @@ static inline const char *xhci_decode_trb(u32 field0, u32 field1, u32 field2, field3 & TRB_CYCLE ? 'C' : 'c'); break; case TRB_DATA: - sprintf(str, "Buffer %08x%08x length %d TD size %d intr %d type '%s' flags %c:%c:%c:%c:%c:%c:%c", + snprintf(str, size, + "Buffer %08x%08x length %d TD size %d intr %d type '%s' flags %c:%c:%c:%c:%c:%c:%c", field1, field0, TRB_LEN(field2), GET_TD_SIZE(field2), GET_INTR_TARGET(field2), xhci_trb_type_string(type), @@ -2291,7 +2295,8 @@ static inline const char *xhci_decode_trb(u32 field0, u32 field1, u32 field2, field3 & TRB_CYCLE ? 'C' : 'c'); break; case TRB_STATUS: - sprintf(str, "Buffer %08x%08x length %d TD size %d intr %d type '%s' flags %c:%c:%c:%c", + snprintf(str, size, + "Buffer %08x%08x length %d TD size %d intr %d type '%s' flags %c:%c:%c:%c", field1, field0, TRB_LEN(field2), GET_TD_SIZE(field2), GET_INTR_TARGET(field2), xhci_trb_type_string(type), @@ -2304,7 +2309,7 @@ static inline const char *xhci_decode_trb(u32 field0, u32 field1, u32 field2, case TRB_ISOC: case TRB_EVENT_DATA: case TRB_TR_NOOP: - sprintf(str, + snprintf(str, size, "Buffer %08x%08x length %d TD size %d intr %d type '%s' flags %c:%c:%c:%c:%c:%c:%c:%c", field1, field0, TRB_LEN(field2), GET_TD_SIZE(field2), GET_INTR_TARGET(field2), @@ -2321,21 +2326,21 @@ static inline const char *xhci_decode_trb(u32 field0, u32 field1, u32 field2, case TRB_CMD_NOOP: case TRB_ENABLE_SLOT: - sprintf(str, + snprintf(str, size, "%s: flags %c", xhci_trb_type_string(type), field3 & TRB_CYCLE ? 'C' : 'c'); break; case TRB_DISABLE_SLOT: case TRB_NEG_BANDWIDTH: - sprintf(str, + snprintf(str, size, "%s: slot %d flags %c", xhci_trb_type_string(type), TRB_TO_SLOT_ID(field3), field3 & TRB_CYCLE ? 'C' : 'c'); break; case TRB_ADDR_DEV: - sprintf(str, + snprintf(str, size, "%s: ctx %08x%08x slot %d flags %c:%c", xhci_trb_type_string(type), field1, field0, @@ -2344,7 +2349,7 @@ static inline const char *xhci_decode_trb(u32 field0, u32 field1, u32 field2, field3 & TRB_CYCLE ? 'C' : 'c'); break; case TRB_CONFIG_EP: - sprintf(str, + snprintf(str, size, "%s: ctx %08x%08x slot %d flags %c:%c", xhci_trb_type_string(type), field1, field0, @@ -2353,7 +2358,7 @@ static inline const char *xhci_decode_trb(u32 field0, u32 field1, u32 field2, field3 & TRB_CYCLE ? 'C' : 'c'); break; case TRB_EVAL_CONTEXT: - sprintf(str, + snprintf(str, size, "%s: ctx %08x%08x slot %d flags %c", xhci_trb_type_string(type), field1, field0, @@ -2361,7 +2366,7 @@ static inline const char *xhci_decode_trb(u32 field0, u32 field1, u32 field2, field3 & TRB_CYCLE ? 'C' : 'c'); break; case TRB_RESET_EP: - sprintf(str, + snprintf(str, size, "%s: ctx %08x%08x slot %d ep %d flags %c:%c", xhci_trb_type_string(type), field1, field0, @@ -2382,7 +2387,7 @@ static inline const char *xhci_decode_trb(u32 field0, u32 field1, u32 field2, field3 & TRB_CYCLE ? 'C' : 'c'); break; case TRB_SET_DEQ: - sprintf(str, + snprintf(str, size, "%s: deq %08x%08x stream %d slot %d ep %d flags %c", xhci_trb_type_string(type), field1, field0, @@ -2393,14 +2398,14 @@ static inline const char *xhci_decode_trb(u32 field0, u32 field1, u32 field2, field3 & TRB_CYCLE ? 'C' : 'c'); break; case TRB_RESET_DEV: - sprintf(str, + snprintf(str, size, "%s: slot %d flags %c", xhci_trb_type_string(type), TRB_TO_SLOT_ID(field3), field3 & TRB_CYCLE ? 'C' : 'c'); break; case TRB_FORCE_EVENT: - sprintf(str, + snprintf(str, size, "%s: event %08x%08x vf intr %d vf id %d flags %c", xhci_trb_type_string(type), field1, field0, @@ -2409,14 +2414,14 @@ static inline const char *xhci_decode_trb(u32 field0, u32 field1, u32 field2, field3 & TRB_CYCLE ? 'C' : 'c'); break; case TRB_SET_LT: - sprintf(str, + snprintf(str, size, "%s: belt %d flags %c", xhci_trb_type_string(type), TRB_TO_BELT(field3), field3 & TRB_CYCLE ? 'C' : 'c'); break; case TRB_GET_BW: - sprintf(str, + snprintf(str, size, "%s: ctx %08x%08x slot %d speed %d flags %c", xhci_trb_type_string(type), field1, field0, @@ -2425,7 +2430,7 @@ static inline const char *xhci_decode_trb(u32 field0, u32 field1, u32 field2, field3 & TRB_CYCLE ? 'C' : 'c'); break; case TRB_FORCE_HEADER: - sprintf(str, + snprintf(str, size, "%s: info %08x%08x%08x pkt type %d roothub port %d flags %c", xhci_trb_type_string(type), field2, field1, field0 & 0xffffffe0, @@ -2434,7 +2439,7 @@ static inline const char *xhci_decode_trb(u32 field0, u32 field1, u32 field2, field3 & TRB_CYCLE ? 'C' : 'c'); break; default: - sprintf(str, + snprintf(str, size, "type '%s' -> raw %08x %08x %08x %08x", xhci_trb_type_string(type), field0, field1, field2, field3); @@ -2557,9 +2562,8 @@ static inline const char *xhci_portsc_link_state_string(u32 portsc) return "Unknown"; } -static inline const char *xhci_decode_portsc(u32 portsc) +static inline const char *xhci_decode_portsc(char *str, u32 portsc) { - static char str[256]; int ret; ret = sprintf(str, "%s %s %s Link:%s PortSpeed:%d ", From 8c04a16d2037148a2e71843bf29d303cc1795b84 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Sun, 30 May 2021 12:24:47 -0400 Subject: [PATCH 25/27] x86/reboot: Limit Dell Optiplex 990 quirk to early BIOS versions commit a729691b541f6e63043beae72e635635abe5dc09 upstream. When this platform was relatively new in November 2011, with early BIOS revisions, a reboot quirk was added in commit 6be30bb7d750 ("x86/reboot: Blacklist Dell OptiPlex 990 known to require PCI reboot") However, this quirk (and several others) are open-ended to all BIOS versions and left no automatic expiry if/when the system BIOS fixed the issue, meaning that nobody is likely to come along and re-test. What is really problematic with using PCI reboot as this quirk does, is that it causes this platform to do a full power down, wait one second, and then power back on. This is less than ideal if one is using it for boot testing and/or bisecting kernels when legacy rotating hard disks are installed. It was only by chance that the quirk was noticed in dmesg - and when disabled it turned out that it wasn't required anymore (BIOS A24), and a default reboot would work fine without the "harshness" of power cycling the machine (and disks) down and up like the PCI reboot does. Doing a bit more research, it seems that the "newest" BIOS for which the issue was reported[1] was version A06, however Dell[2] seemed to suggest only up to and including version A05, with the A06 having a large number of fixes[3] listed. As is typical with a new platform, the initial BIOS updates come frequently and then taper off (and in this case, with a revival for CPU CVEs); a search for O990-A.exe reveals the following dates: A02 16 Mar 2011 A03 11 May 2011 A06 14 Sep 2011 A07 24 Oct 2011 A10 08 Dec 2011 A14 06 Sep 2012 A16 15 Oct 2012 A18 30 Sep 2013 A19 23 Sep 2015 A20 02 Jun 2017 A23 07 Mar 2018 A24 21 Aug 2018 While it's overkill to flash and test each of the above, it would seem likely that the issue was contained within A0x BIOS versions, given the dates above and the dates of issue reports[4] from distros. So rather than just throw out the quirk entirely, limit the scope to just those early BIOS versions, in case people are still running systems from 2011 with the original as-shipped early A0x BIOS versions. [1] https://lore.kernel.org/lkml/1320373471-3942-1-git-send-email-trenn@suse.de/ [2] https://www.dell.com/support/kbdoc/en-ca/000131908/linux-based-operating-systems-stall-upon-reboot-on-optiplex-390-790-990-systems [3] https://www.dell.com/support/home/en-ca/drivers/driversdetails?driverid=85j10 [4] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/768039 Fixes: 6be30bb7d750 ("x86/reboot: Blacklist Dell OptiPlex 990 known to require PCI reboot") Signed-off-by: Paul Gortmaker Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210530162447.996461-4-paul.gortmaker@windriver.com Signed-off-by: Greg Kroah-Hartman --- arch/x86/kernel/reboot.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index b29657b76e3f..798a6f73f894 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -388,10 +388,11 @@ static const struct dmi_system_id reboot_dmi_table[] __initconst = { }, { /* Handle problems with rebooting on the OptiPlex 990. */ .callback = set_pci_reboot, - .ident = "Dell OptiPlex 990", + .ident = "Dell OptiPlex 990 BIOS A0x", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 990"), + DMI_MATCH(DMI_BIOS_VERSION, "A0"), }, }, { /* Handle problems with rebooting on Dell 300's */ From f72fce5507097309de4dd6df3faac12c87e61fd9 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marek=20Beh=C3=BAn?= Date: Thu, 24 Jun 2021 19:14:17 +0200 Subject: [PATCH 26/27] PCI: Call Max Payload Size-related fixup quirks early MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit b8da302e2955fe4d41eb9d48199242674d77dbe0 upstream. pci_device_add() calls HEADER fixups after pci_configure_device(), which configures Max Payload Size. Convert MPS-related fixups to EARLY fixups so pci_configure_mps() takes them into account. Fixes: 27d868b5e6cfa ("PCI: Set MPS to match upstream bridge") Link: https://lore.kernel.org/r/20210624171418.27194-1-kabel@kernel.org Signed-off-by: Marek Behún Signed-off-by: Bjorn Helgaas Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/pci/quirks.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index cd2401d4764f..a91c944961ca 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -3246,12 +3246,12 @@ static void fixup_mpss_256(struct pci_dev *dev) { dev->pcie_mpss = 1; /* 256 bytes */ } -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE, - PCI_DEVICE_ID_SOLARFLARE_SFC4000A_0, fixup_mpss_256); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE, - PCI_DEVICE_ID_SOLARFLARE_SFC4000A_1, fixup_mpss_256); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE, - PCI_DEVICE_ID_SOLARFLARE_SFC4000B, fixup_mpss_256); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SOLARFLARE, + PCI_DEVICE_ID_SOLARFLARE_SFC4000A_0, fixup_mpss_256); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SOLARFLARE, + PCI_DEVICE_ID_SOLARFLARE_SFC4000A_1, fixup_mpss_256); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SOLARFLARE, + PCI_DEVICE_ID_SOLARFLARE_SFC4000B, fixup_mpss_256); /* * Intel 5000 and 5100 Memory controllers have an erratum with read completion From cb83afdc0b865d7c8a74d2b2a1f7dd393e1d196d Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Sun, 12 Sep 2021 08:58:28 +0200 Subject: [PATCH 27/27] Linux 5.10.64 Link: https://lore.kernel.org/r/20210910122916.253646001@linuxfoundation.org Tested-by: Florian Fainelli Tested-by: Pavel Machek (CIP) Tested-by: Salvatore Bonaccorso Tested-by: Fox Chen Tested-by: Shuah Khan Tested-by: Hulk Robot Tested-by: Sudip Mukherjee Tested-by: Guenter Roeck Tested-by: Linux Kernel Functional Testing Signed-off-by: Greg Kroah-Hartman --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index b2d326f4dea6..982aa1876aa0 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 VERSION = 5 PATCHLEVEL = 10 -SUBLEVEL = 63 +SUBLEVEL = 64 EXTRAVERSION = NAME = Dare mighty things