diff --git a/drivers/staging/comedi/drivers/s626.c b/drivers/staging/comedi/drivers/s626.c
index 50656a78b263..779ae7a104f6 100644
--- a/drivers/staging/comedi/drivers/s626.c
+++ b/drivers/staging/comedi/drivers/s626.c
@@ -376,7 +376,6 @@ static uint8_t I2Cread(struct comedi_device *dev, uint8_t addr)
 			 /* Byte1 = EEPROM internal target address. */
 			 | I2C_B0(I2C_ATTRNOP, 0))) {	/*  Byte0 = Not sent. */
 		/*  Abort function and declare error if handshake failed. */
-		DEBUG("I2Cread: error handshake I2Cread  a\n");
 		return 0;
 	}
 	/*  Execute EEPROM read. */
@@ -394,7 +393,6 @@ static uint8_t I2Cread(struct comedi_device *dev, uint8_t addr)
 			 |I2C_B0(I2C_ATTRNOP, 0))) {	/*  Byte0 = Not  sent. */
 
 		/*  Abort function and declare error if handshake failed. */
-		DEBUG("I2Cread: error handshake I2Cread b\n");
 		return 0;
 	}
 	/*  Return copy of EEPROM value. */
@@ -653,7 +651,6 @@ static void LoadTrimDACs(struct comedi_device *dev)
 static uint32_t ReadLatch(struct comedi_device *dev, struct enc_private *k)
 {
 	register uint32_t value;
-	/* DEBUG FIXME DEBUG("ReadLatch: Read Latch enter\n"); */
 
 	/*  Latch counts and fetch LSW of latched counts value. */
 	value = (uint32_t) DEBIread(dev, k->MyLatchLsw);
@@ -661,8 +658,6 @@ static uint32_t ReadLatch(struct comedi_device *dev, struct enc_private *k)
 	/*  Fetch MSW of latched counts and combine with LSW. */
 	value |= ((uint32_t) DEBIread(dev, k->MyLatchLsw + 2) << 16);
 
-	/*  DEBUG FIXME DEBUG("ReadLatch: Read Latch exit\n"); */
-
 	/*  Return latched counts. */
 	return value;
 }
@@ -674,21 +669,16 @@ static uint32_t ReadLatch(struct comedi_device *dev, struct enc_private *k)
 static void SetLatchSource(struct comedi_device *dev, struct enc_private *k,
 			   uint16_t value)
 {
-	DEBUG("SetLatchSource: SetLatchSource enter 3550\n");
 	DEBIreplace(dev, k->MyCRB,
 		    (uint16_t) (~(CRBMSK_INTCTRL | CRBMSK_LATCHSRC)),
 		    (uint16_t) (value << CRBBIT_LATCHSRC));
-
-	DEBUG("SetLatchSource: SetLatchSource exit\n");
 }
 
 /*  Write value into counter preload register. */
 static void Preload(struct comedi_device *dev, struct enc_private *k,
 		    uint32_t value)
 {
-	DEBUG("Preload: preload enter\n");
-	DEBIwrite(dev, (uint16_t) (k->MyLatchLsw), (uint16_t) value);	/*  Write value to preload register. */
-	DEBUG("Preload: preload step 1\n");
+	DEBIwrite(dev, (uint16_t) (k->MyLatchLsw), (uint16_t) value);
 	DEBIwrite(dev, (uint16_t) (k->MyLatchLsw + 2),
 		  (uint16_t) (value >> 16));
 }
@@ -719,8 +709,6 @@ static int s626_dio_set_irq(struct comedi_device *dev, unsigned int chan)
 	/* select dio bank */
 	group = chan / 16;
 	bitmask = 1 << (chan - (16 * group));
-	DEBUG("s626_dio_set_irq: enable interrupt on dio channel %d group %d\n",
-	      chan - (16 * group), group);
 
 	/* set channel to capture positive edge */
 	status = DEBIread(dev,
@@ -758,10 +746,6 @@ static int s626_dio_set_irq(struct comedi_device *dev, unsigned int chan)
 static int s626_dio_reset_irq(struct comedi_device *dev, unsigned int group,
 			      unsigned int mask)
 {
-	DEBUG
-	    ("s626_dio_reset_irq: disable  interrupt on dio channel %d group %d\n",
-	     mask, group);
-
 	/* disable edge capture write command */
 	DEBIwrite(dev, LP_MISC1, MISC1_NOEDCAP);
 
@@ -805,8 +789,6 @@ static irqreturn_t s626_irq_handler(int irq, void *d)
 	uint8_t group;
 	uint16_t irqbit;
 
-	DEBUG("s626_irq_handler: interrupt request received!!!\n");
-
 	if (dev->attached == 0)
 		return IRQ_NONE;
 	/*  lock to avoid race with comedi_poll */
@@ -824,14 +806,8 @@ static irqreturn_t s626_irq_handler(int irq, void *d)
 	/* clear interrupt */
 	writel(irqtype, devpriv->base_addr + P_ISR);
 
-	/* do somethings */
-	DEBUG("s626_irq_handler: interrupt type %d\n", irqtype);
-
 	switch (irqtype) {
 	case IRQ_RPS1:		/*  end_of_scan occurs */
-
-		DEBUG("s626_irq_handler: RPS1 irq detected\n");
-
 		/*  manage ai subdevice */
 		s = dev->subdevices;
 		cmd = &(s->async->cmd);
@@ -854,9 +830,6 @@ static irqreturn_t s626_irq_handler(int irq, void *d)
 			if (cfc_write_to_buffer(s, tempdata) == 0)
 				printk
 				    ("s626_irq_handler: cfc_write_to_buffer error!\n");
-
-			DEBUG("s626_irq_handler: ai channel %d acquired: %d\n",
-			      i, tempdata);
 		}
 
 		/* end of scan occurs */
@@ -877,23 +850,12 @@ static irqreturn_t s626_irq_handler(int irq, void *d)
 			irqstatus = 0;
 		}
 
-		if (devpriv->ai_cmd_running && cmd->scan_begin_src == TRIG_EXT) {
-			DEBUG
-			    ("s626_irq_handler: enable interrupt on dio channel %d\n",
-			     cmd->scan_begin_arg);
-
+		if (devpriv->ai_cmd_running && cmd->scan_begin_src == TRIG_EXT)
 			s626_dio_set_irq(dev, cmd->scan_begin_arg);
-
-			DEBUG("s626_irq_handler: External trigger is set!!!\n");
-		}
 		/*  tell comedi that data is there */
-		DEBUG("s626_irq_handler: events %d\n", s->async->events);
 		comedi_event(dev, s);
 		break;
 	case IRQ_GPIO3:	/* check dio and conter interrupt */
-
-		DEBUG("s626_irq_handler: GPIO3 irq detected\n");
-
 		/*  manage ai subdevice */
 		s = dev->subdevices;
 		cmd = &(s->async->cmd);
@@ -913,36 +875,18 @@ static irqreturn_t s626_irq_handler(int irq, void *d)
 			/* check if interrupt is generated from dio channels */
 			if (irqbit) {
 				s626_dio_reset_irq(dev, group, irqbit);
-				DEBUG
-				    ("s626_irq_handler: check interrupt on dio group %d %d\n",
-				     group, i);
 				if (devpriv->ai_cmd_running) {
 					/* check if interrupt is an ai acquisition start trigger */
 					if ((irqbit >> (cmd->start_arg -
 							(16 * group)))
 					    == 1 && cmd->start_src == TRIG_EXT) {
-						DEBUG
-						    ("s626_irq_handler: Edge capture interrupt received from channel %d\n",
-						     cmd->start_arg);
-
 						/*  Start executing the RPS program. */
 						MC_ENABLE(P_MC1, MC1_ERPS1);
 
-						DEBUG
-						    ("s626_irq_handler: acquisition start triggered!!!\n");
-
 						if (cmd->scan_begin_src ==
 						    TRIG_EXT) {
-							DEBUG
-							    ("s626_ai_cmd: enable interrupt on dio channel %d\n",
-							     cmd->
-							     scan_begin_arg);
-
 							s626_dio_set_irq(dev,
 									 cmd->scan_begin_arg);
-
-							DEBUG
-							    ("s626_irq_handler: External scan trigger is set!!!\n");
 						}
 					}
 					if ((irqbit >> (cmd->scan_begin_arg -
@@ -950,33 +894,16 @@ static irqreturn_t s626_irq_handler(int irq, void *d)
 					    == 1
 					    && cmd->scan_begin_src ==
 					    TRIG_EXT) {
-						DEBUG
-						    ("s626_irq_handler: Edge capture interrupt received from channel %d\n",
-						     cmd->scan_begin_arg);
-
 						/*  Trigger ADC scan loop start by setting RPS Signal 0. */
 						MC_ENABLE(P_MC2, MC2_ADC_RPS);
 
-						DEBUG
-						    ("s626_irq_handler: scan triggered!!! %d\n",
-						     devpriv->ai_sample_count);
 						if (cmd->convert_src ==
 						    TRIG_EXT) {
-
-							DEBUG
-							    ("s626_ai_cmd: enable interrupt on dio channel %d group %d\n",
-							     cmd->convert_arg -
-							     (16 * group),
-							     group);
-
 							devpriv->ai_convert_count
 							    = cmd->chanlist_len;
 
 							s626_dio_set_irq(dev,
 									 cmd->convert_arg);
-
-							DEBUG
-							    ("s626_irq_handler: External convert trigger is set!!!\n");
 						}
 
 						if (cmd->convert_src ==
@@ -992,32 +919,15 @@ static irqreturn_t s626_irq_handler(int irq, void *d)
 							(16 * group)))
 					    == 1
 					    && cmd->convert_src == TRIG_EXT) {
-						DEBUG
-						    ("s626_irq_handler: Edge capture interrupt received from channel %d\n",
-						     cmd->convert_arg);
-
 						/*  Trigger ADC scan loop start by setting RPS Signal 0. */
 						MC_ENABLE(P_MC2, MC2_ADC_RPS);
 
-						DEBUG
-						    ("s626_irq_handler: adc convert triggered!!!\n");
-
 						devpriv->ai_convert_count--;
 
 						if (devpriv->ai_convert_count >
 						    0) {
-
-							DEBUG
-							    ("s626_ai_cmd: enable interrupt on dio channel %d group %d\n",
-							     cmd->convert_arg -
-							     (16 * group),
-							     group);
-
 							s626_dio_set_irq(dev,
 									 cmd->convert_arg);
-
-							DEBUG
-							    ("s626_irq_handler: External trigger is set!!!\n");
 						}
 					}
 				}
@@ -1029,44 +939,31 @@ static irqreturn_t s626_irq_handler(int irq, void *d)
 		irqbit = DEBIread(dev, LP_RDMISC2);
 
 		/* check interrupt on counters */
-		DEBUG("s626_irq_handler: check counters interrupt %d\n",
-		      irqbit);
-
 		if (irqbit & IRQ_COINT1A) {
-			DEBUG
-			    ("s626_irq_handler: interrupt on counter 1A overflow\n");
 			k = &encpriv[0];
 
 			/* clear interrupt capture flag */
 			k->ResetCapFlags(dev, k);
 		}
 		if (irqbit & IRQ_COINT2A) {
-			DEBUG
-			    ("s626_irq_handler: interrupt on counter 2A overflow\n");
 			k = &encpriv[1];
 
 			/* clear interrupt capture flag */
 			k->ResetCapFlags(dev, k);
 		}
 		if (irqbit & IRQ_COINT3A) {
-			DEBUG
-			    ("s626_irq_handler: interrupt on counter 3A overflow\n");
 			k = &encpriv[2];
 
 			/* clear interrupt capture flag */
 			k->ResetCapFlags(dev, k);
 		}
 		if (irqbit & IRQ_COINT1B) {
-			DEBUG
-			    ("s626_irq_handler: interrupt on counter 1B overflow\n");
 			k = &encpriv[3];
 
 			/* clear interrupt capture flag */
 			k->ResetCapFlags(dev, k);
 		}
 		if (irqbit & IRQ_COINT2B) {
-			DEBUG
-			    ("s626_irq_handler: interrupt on counter 2B overflow\n");
 			k = &encpriv[4];
 
 			/* clear interrupt capture flag */
@@ -1078,34 +975,23 @@ static irqreturn_t s626_irq_handler(int irq, void *d)
 					k->SetEnable(dev, k, CLKENAB_INDEX);
 
 				if (cmd->convert_src == TRIG_TIMER) {
-					DEBUG
-					    ("s626_irq_handler: conver timer trigger!!! %d\n",
-					     devpriv->ai_convert_count);
-
 					/*  Trigger ADC scan loop start by setting RPS Signal 0. */
 					MC_ENABLE(P_MC2, MC2_ADC_RPS);
 				}
 			}
 		}
 		if (irqbit & IRQ_COINT3B) {
-			DEBUG
-			    ("s626_irq_handler: interrupt on counter 3B overflow\n");
 			k = &encpriv[5];
 
 			/* clear interrupt capture flag */
 			k->ResetCapFlags(dev, k);
 
 			if (cmd->scan_begin_src == TRIG_TIMER) {
-				DEBUG
-				    ("s626_irq_handler: scan timer trigger!!!\n");
-
 				/*  Trigger ADC scan loop start by setting RPS Signal 0. */
 				MC_ENABLE(P_MC2, MC2_ADC_RPS);
 			}
 
 			if (cmd->convert_src == TRIG_TIMER) {
-				DEBUG
-				    ("s626_irq_handler: convert timer trigger is set\n");
 				k = &encpriv[4];
 				devpriv->ai_convert_count = cmd->chanlist_len;
 				k->SetEnable(dev, k, CLKENAB_ALWAYS);
@@ -1116,8 +1002,6 @@ static irqreturn_t s626_irq_handler(int irq, void *d)
 	/* enable interrupt */
 	writel(irqstatus, devpriv->base_addr + P_IER);
 
-	DEBUG("s626_irq_handler: exit interrupt service routine.\n");
-
 	spin_unlock_irqrestore(&dev->spinlock, flags);
 	return IRQ_HANDLED;
 }
@@ -1146,7 +1030,6 @@ static void ResetADC(struct comedi_device *dev, uint8_t *ppl)
 	/*  Construct RPS program in RPSBuf DMA buffer */
 
 	if (cmd != NULL && cmd->scan_begin_src != TRIG_FOLLOW) {
-		DEBUG("ResetADC: scan_begin pause inserted\n");
 		/*  Wait for Start trigger. */
 		*pRPS++ = RPS_PAUSE | RPS_SIGADC;
 		*pRPS++ = RPS_CLRSIGNAL | RPS_SIGADC;
@@ -1236,7 +1119,6 @@ static void ResetADC(struct comedi_device *dev, uint8_t *ppl)
 		}
 
 		if (cmd != NULL && cmd->convert_src != TRIG_NOW) {
-			DEBUG("ResetADC: convert pause inserted\n");
 			/*  Wait for Start trigger. */
 			*pRPS++ = RPS_PAUSE | RPS_SIGADC;
 			*pRPS++ = RPS_CLRSIGNAL | RPS_SIGADC;
@@ -1268,7 +1150,6 @@ static void ResetADC(struct comedi_device *dev, uint8_t *ppl)
 			break;	/*  Exit poll list processing loop. */
 		}
 	}
-	DEBUG("ResetADC: ADC items %d\n", devpriv->AdcItems);
 
 	/* VERSION 2.01 CHANGE: DELAY CHANGED FROM 250NS to 2US.  Allow the
 	 * ADC to stabilize for 2 microseconds before starting the final
@@ -1305,7 +1186,6 @@ static void ResetADC(struct comedi_device *dev, uint8_t *ppl)
 
 	/* invoke interrupt */
 	if (devpriv->ai_cmd_running == 1) {
-		DEBUG("ResetADC: insert irq in ADC RPS task\n");
 		*pRPS++ = RPS_IRQ;
 	}
 	/*  Restart RPS program at its beginning. */
@@ -1329,8 +1209,6 @@ static int s626_ai_insn_config(struct comedi_device *dev,
 /*   register uint8_t	i; */
 /*   register int32_t	*readaddr; */
 
-/*   DEBUG("as626_ai_rinsn: ai_rinsn enter\n");  */
-
 /*   Trigger ADC scan loop start by setting RPS Signal 0. */
 /*   MC_ENABLE( P_MC2, MC2_ADC_RPS ); */
 
@@ -1346,11 +1224,9 @@ static int s626_ai_insn_config(struct comedi_device *dev,
 /*  Convert ADC data to 16-bit integer values and copy to application buffer. */
 /*   for ( i = 0; i < devpriv->AdcItems; i++ ) { */
 /*     *data = s626_ai_reg_to_uint( *readaddr++ ); */
-/*     DEBUG("s626_ai_rinsn: data %d\n",*data); */
 /*     data++; */
 /*   } */
 
-/*   DEBUG("s626_ai_rinsn: ai_rinsn escape\n"); */
 /*   return i; */
 /* } */
 
@@ -1370,8 +1246,6 @@ static int s626_ai_insn_read(struct comedi_device *dev,
 	 * corresponding interrupt to be generated if enabled
 	 */
 
-	DEBUG("s626_ai_insn_read: entering\n");
-
 	/* Convert application's ADC specification into form
 	 *  appropriate for register programming.
 	 */
@@ -1448,8 +1322,6 @@ static int s626_ai_insn_read(struct comedi_device *dev,
 	if (n != 0)
 		data[n - 1] = s626_ai_reg_to_uint(RR7146(P_FB_BUFFER1));
 
-	DEBUG("s626_ai_insn_read: samples %d, data %d\n", n, data[n - 1]);
-
 	return n;
 }
 
@@ -1476,15 +1348,11 @@ static int s626_ai_inttrig(struct comedi_device *dev,
 	if (trignum != 0)
 		return -EINVAL;
 
-	DEBUG("s626_ai_inttrig: trigger adc start...");
-
 	/*  Start executing the RPS program. */
 	MC_ENABLE(P_MC1, MC1_ERPS1);
 
 	s->async->inttrig = NULL;
 
-	DEBUG(" done\n");
-
 	return 1;
 }
 
@@ -1559,8 +1427,6 @@ static int s626_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 	struct enc_private *k;
 	int tick;
 
-	DEBUG("s626_ai_cmd: entering command function\n");
-
 	if (devpriv->ai_cmd_running) {
 		printk(KERN_ERR "s626_ai_cmd: Another ai_cmd is running %d\n",
 		       dev->minor);
@@ -1580,12 +1446,8 @@ static int s626_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 	devpriv->ai_cmd_running = 0;
 
 	/*  test if cmd is valid */
-	if (cmd == NULL) {
-		DEBUG("s626_ai_cmd: NULL command\n");
+	if (cmd == NULL)
 		return -EINVAL;
-	} else {
-		DEBUG("s626_ai_cmd: command received!!!\n");
-	}
 
 	if (dev->irq == 0) {
 		comedi_error(dev,
@@ -1609,18 +1471,11 @@ static int s626_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 		/* load timer value and enable interrupt */
 		s626_timer_load(dev, k, tick);
 		k->SetEnable(dev, k, CLKENAB_ALWAYS);
-
-		DEBUG("s626_ai_cmd: scan trigger timer is set with value %d\n",
-		      tick);
-
 		break;
 	case TRIG_EXT:
 		/*  set the digital line and interrupt for scan trigger */
 		if (cmd->start_src != TRIG_EXT)
 			s626_dio_set_irq(dev, cmd->scan_begin_arg);
-
-		DEBUG("s626_ai_cmd: External scan trigger is set!!!\n");
-
 		break;
 	}
 
@@ -1636,19 +1491,12 @@ static int s626_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 		/* load timer value and enable interrupt */
 		s626_timer_load(dev, k, tick);
 		k->SetEnable(dev, k, CLKENAB_INDEX);
-
-		DEBUG
-		    ("s626_ai_cmd: convert trigger timer is set with value %d\n",
-		     tick);
 		break;
 	case TRIG_EXT:
 		/*  set the digital line and interrupt for convert trigger */
 		if (cmd->scan_begin_src != TRIG_EXT
 		    && cmd->start_src == TRIG_EXT)
 			s626_dio_set_irq(dev, cmd->convert_arg);
-
-		DEBUG("s626_ai_cmd: External convert trigger is set!!!\n");
-
 		break;
 	}
 
@@ -1675,15 +1523,12 @@ static int s626_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 		/*  Start executing the RPS program. */
 		MC_ENABLE(P_MC1, MC1_ERPS1);
 
-		DEBUG("s626_ai_cmd: ADC triggered\n");
 		s->async->inttrig = NULL;
 		break;
 	case TRIG_EXT:
 		/* configure DIO channel for acquisition trigger */
 		s626_dio_set_irq(dev, cmd->start_arg);
 
-		DEBUG("s626_ai_cmd: External start trigger is set!!!\n");
-
 		s->async->inttrig = NULL;
 		break;
 	case TRIG_INT:
@@ -1694,8 +1539,6 @@ static int s626_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 	/* enable interrupt */
 	writel(IRQ_GPIO3 | IRQ_RPS1, devpriv->base_addr + P_IER);
 
-	DEBUG("s626_ai_cmd: command function terminated\n");
-
 	return 0;
 }
 
@@ -1938,7 +1781,6 @@ static void s626_dio_init(struct comedi_device *dev)
 		DEBIwrite(dev, diopriv->WRDOut, 0);	/*  Program all outputs */
 		/*  to inactive state. */
 	}
-	DEBUG("s626_dio_init: DIO initialized\n");
 }
 
 /* DIO devices are slightly special.  Although it is possible to
@@ -2023,8 +1865,6 @@ static int s626_enc_insn_config(struct comedi_device *dev,
 	uint16_t enab = CLKENAB_ALWAYS;
 	struct enc_private *k = &encpriv[CR_CHAN(insn->chanspec)];
 
-	DEBUG("s626_enc_insn_config: encoder config\n");
-
 	/*   (data==NULL) ? (Preloadvalue=0) : (Preloadvalue=data[0]); */
 
 	k->SetMode(dev, k, Setup, TRUE);
@@ -2044,14 +1884,9 @@ static int s626_enc_insn_read(struct comedi_device *dev,
 	int n;
 	struct enc_private *k = &encpriv[CR_CHAN(insn->chanspec)];
 
-	DEBUG("s626_enc_insn_read: encoder read channel %d\n",
-	      CR_CHAN(insn->chanspec));
-
 	for (n = 0; n < insn->n; n++)
 		data[n] = ReadLatch(dev, k);
 
-	DEBUG("s626_enc_insn_read: encoder sample %d\n", data[n]);
-
 	return n;
 }
 
@@ -2062,9 +1897,6 @@ static int s626_enc_insn_write(struct comedi_device *dev,
 
 	struct enc_private *k = &encpriv[CR_CHAN(insn->chanspec)];
 
-	DEBUG("s626_enc_insn_write: encoder write channel %d\n",
-	      CR_CHAN(insn->chanspec));
-
 	/*  Set the preload register */
 	Preload(dev, k, data[0]);
 
@@ -2074,8 +1906,6 @@ static int s626_enc_insn_write(struct comedi_device *dev,
 	k->PulseIndex(dev, k);
 	k->SetLoadTrig(dev, k, 2);
 
-	DEBUG("s626_enc_insn_write: End encoder write\n");
-
 	return 1;
 }
 
@@ -2093,7 +1923,6 @@ static void CloseDMAB(struct comedi_device *dev, struct bufferDMA *pdma,
 	void *vbptr;
 	dma_addr_t vpptr;
 
-	DEBUG("CloseDMAB: Entering S626DRV_CloseDMAB():\n");
 	if (pdma == NULL)
 		return;
 	/* find the matching allocation from the board struct */
@@ -2104,9 +1933,6 @@ static void CloseDMAB(struct comedi_device *dev, struct bufferDMA *pdma,
 		pci_free_consistent(devpriv->pdev, bsize, vbptr, vpptr);
 		pdma->LogicalBase = NULL;
 		pdma->PhysicalBase = 0;
-
-		DEBUG("CloseDMAB(): Logical=%p, bsize=%d, Physical=0x%x\n",
-		      vbptr, bsize, (uint32_t) vpptr);
 	}
 }
 
@@ -2337,7 +2163,6 @@ static void SetMode_B(struct comedi_device *dev, struct enc_private *k,
 static void SetEnable_A(struct comedi_device *dev, struct enc_private *k,
 			uint16_t enab)
 {
-	DEBUG("SetEnable_A: SetEnable_A enter 3541\n");
 	DEBIreplace(dev, k->MyCRB,
 		    (uint16_t) (~(CRBMSK_INTCTRL | CRBMSK_CLKENAB_A)),
 		    (uint16_t) (enab << CRBBIT_CLKENAB_A));
@@ -2506,7 +2331,6 @@ static uint16_t GetIntSrc_B(struct comedi_device *dev, struct enc_private *k)
 
 /* static void SetIndexSrc(struct comedi_device *dev, struct enc_private *k, uint16_t value )  */
 /* { */
-/*   DEBUG("SetIndexSrc: set index src enter 3700\n"); */
 /*   k->SetMode(dev, k, (uint16_t)( ( k->GetMode(dev, k ) & ~STDMSK_INDXSRC ) | ( (value != 0) << STDBIT_INDXSRC ) ), FALSE ); */
 /* } */
 
@@ -2521,11 +2345,8 @@ static void PulseIndex_A(struct comedi_device *dev, struct enc_private *k)
 {
 	register uint16_t cra;
 
-	DEBUG("PulseIndex_A: pulse index enter\n");
-
 	cra = DEBIread(dev, k->MyCRA);	/*  Pulse index. */
 	DEBIwrite(dev, k->MyCRA, (uint16_t) (cra ^ CRAMSK_INDXPOL_A));
-	DEBUG("PulseIndex_A: pulse index step1\n");
 	DEBIwrite(dev, k->MyCRA, cra);
 }
 
@@ -2653,8 +2474,6 @@ static void CountersInit(struct comedi_device *dev)
 		k->ResetCapFlags(dev, k);
 		k->SetEnable(dev, k, CLKENAB_ALWAYS);
 	}
-	DEBUG("CountersInit: counters initialized\n");
-
 }
 
 static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it)
@@ -2722,7 +2541,6 @@ static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		writel(MC1_SOFT_RESET, devpriv->base_addr + P_MC1);
 
 		/* DMA FIXME DMA// */
-		DEBUG("s626_attach: DMA ALLOCATION\n");
 
 		/* adc buffer allocation */
 		devpriv->allocatedBuf = 0;
@@ -2737,11 +2555,6 @@ static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 
 		devpriv->ANABuf.PhysicalBase = appdma;
 
-		DEBUG
-		    ("s626_attach: AllocDMAB ADC Logical=%p, bsize=%d, Physical=0x%x\n",
-		     devpriv->ANABuf.LogicalBase, DMABUF_SIZE,
-		     (uint32_t) devpriv->ANABuf.PhysicalBase);
-
 		devpriv->allocatedBuf++;
 
 		devpriv->RPSBuf.LogicalBase =
@@ -2754,11 +2567,6 @@ static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 
 		devpriv->RPSBuf.PhysicalBase = appdma;
 
-		DEBUG
-		    ("s626_attach: AllocDMAB RPS Logical=%p, bsize=%d, Physical=0x%x\n",
-		     devpriv->RPSBuf.LogicalBase, DMABUF_SIZE,
-		     (uint32_t) devpriv->RPSBuf.PhysicalBase);
-
 		devpriv->allocatedBuf++;
 
 	}
@@ -2786,9 +2594,6 @@ static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		}
 	}
 
-	DEBUG("s626_attach: -- it opts  %d,%d --\n",
-	      it->options[0], it->options[1]);
-
 	s = dev->subdevices + 0;
 	/* analog input subdevice */
 	dev->read_subdev = s;
@@ -2887,11 +2692,6 @@ static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		       | DEBI_CFG_INTEL);	/*  Intel-compatible */
 		/*  local bus (DEBI */
 		/*  never times out). */
-		DEBUG("s626_attach: %d debi init -- %d\n",
-		      DEBI_CFG_SLAVE16 | (DEBI_TOUT << DEBI_CFG_TOUT_BIT) |
-		      DEBI_SWAP | DEBI_CFG_INTEL,
-		      DEBI_CFG_INTEL | DEBI_CFG_TOQ | DEBI_CFG_INCQ |
-		      DEBI_CFG_16Q);
 
 		/* DEBI INIT S626 WR7146( P_DEBICFG, DEBI_CFG_INTEL | DEBI_CFG_TOQ */
 		/* | DEBI_CFG_INCQ| DEBI_CFG_16Q); //end */
@@ -3128,9 +2928,6 @@ static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		/*  writel(IRQ_GPIO3 | IRQ_RPS1,devpriv->base_addr+P_IER); */
 	}
 
-	DEBUG("s626_attach: comedi%d s626 attached %04x\n", dev->minor,
-	      (uint32_t) devpriv->base_addr);
-
 	return 1;
 }
 
diff --git a/drivers/staging/comedi/drivers/s626.h b/drivers/staging/comedi/drivers/s626.h
index 2d1afecbbb60..82de03fb9c4c 100644
--- a/drivers/staging/comedi/drivers/s626.h
+++ b/drivers/staging/comedi/drivers/s626.h
@@ -62,12 +62,6 @@
    comedi_do_insn(cf,&insn); // executing configuration
 */
 
-#ifdef _DEBUG_
-#define DEBUG(...);        printk(__VA_ARGS__);
-#else
-#define DEBUG(...)
-#endif
-
 #if !defined(TRUE)
 #define TRUE    (1)
 #endif