ARM: dts: rk3229-gva-sdk: add new dts for google voice assistant sdk.
Change-Id: Ib1fedf6a86dff770f59e1a9313356d65c39835a4 Signed-off-by: Wenping Zhang <wenping.zhang@rock-chips.com>
This commit is contained in:
parent
fa96033dcf
commit
bb0bcb79fc
2 changed files with 276 additions and 0 deletions
|
|
@ -521,6 +521,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
|
|||
rk3228-evb.dtb \
|
||||
rk3229-echo-v10.dtb \
|
||||
rk3229-evb.dtb \
|
||||
rk3229-gva-sdk.dtb \
|
||||
rk3288-evb-act8846-edp.dtb \
|
||||
rk3288-evb-rk808.dtb \
|
||||
rk3288-evb-rk818-edp.dtb \
|
||||
|
|
|
|||
275
arch/arm/boot/dts/rk3229-gva-sdk.dts
Normal file
275
arch/arm/boot/dts/rk3229-gva-sdk.dts
Normal file
|
|
@ -0,0 +1,275 @@
|
|||
/*
|
||||
* Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of the
|
||||
* License, or (at your option) any later version.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively,
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use,
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "rk322x.dtsi"
|
||||
#include "rk3229-cpu-opp.dtsi"
|
||||
#include "rk322x-android.dtsi"
|
||||
|
||||
/ {
|
||||
model = "RK3229 GOOGLE VOICE ASSISTANT SDK Board";
|
||||
compatible = "rockchip,rk3229-gva-sdk", "rockchip,rk3229";
|
||||
|
||||
memory@60000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x60000000 0x40000000>;
|
||||
};
|
||||
|
||||
vcc_host: vcc-host-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&host_vbus_drv>;
|
||||
regulator-name = "vcc_host";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
wireless-bluetooth {
|
||||
compatible = "bluetooth-platdata";
|
||||
uart_rts_gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default", "rts_gpio";
|
||||
pinctrl-0 = <&uart1_rts>;
|
||||
pinctrl-1 = <&uart1_gpios>;
|
||||
BT,reset_gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>;
|
||||
BT,wake_gpio = <&gpio3 27 GPIO_ACTIVE_HIGH>;
|
||||
BT,wake_host_irq = <&gpio3 26 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
wireless-wlan {
|
||||
compatible = "wlan-platdata";
|
||||
rockchip,grf = <&grf>;
|
||||
wifi_chip_type = "ap6335";
|
||||
sdio_vref = <1800>;
|
||||
WIFI,host_wake_irq = <&gpio0 28 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&gpu {
|
||||
status = "okay";
|
||||
mali-supply = <&vdd_logic>;
|
||||
};
|
||||
|
||||
&nandc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&emmc {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
rk805: rk805@18 {
|
||||
compatible = "rockchip,rk805";
|
||||
status = "okay";
|
||||
reg = <0x18>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
|
||||
spinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int_l>;
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "xin32k", "rk805-clkout2";
|
||||
|
||||
rtc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pwrkey {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
gpio {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
regulators {
|
||||
compatible = "rk805-regulator";
|
||||
status = "okay";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
vdd_arm: RK805_DCDC1@0 {
|
||||
regulator-compatible = "RK805_DCDC1";
|
||||
regulator-name = "vdd_arm";
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1450000>;
|
||||
regulator-initial-mode = <0x1>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-mode = <0x2>;
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <950000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_logic: RK805_DCDC2@1 {
|
||||
regulator-compatible = "RK805_DCDC2";
|
||||
regulator-name = "vdd_logic";
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1450000>;
|
||||
regulator-initial-mode = <0x1>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-mode = <0x2>;
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: RK805_DCDC3@2 {
|
||||
regulator-compatible = "RK805_DCDC3";
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-initial-mode = <0x1>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-mode = <0x2>;
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_io: RK805_DCDC4@3 {
|
||||
regulator-compatible = "RK805_DCDC4";
|
||||
regulator-name = "vcc_io";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-initial-mode = <0x1>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-mode = <0x2>;
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_18: RK805_LDO1@4 {
|
||||
regulator-compatible = "RK805_LDO1";
|
||||
regulator-name = "vcc_18";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_18emmc: RK805_LDO2@5 {
|
||||
regulator-compatible = "RK805_LDO2";
|
||||
regulator-name = "vcc_18emmc";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_10: RK805_LDO3@6 {
|
||||
regulator-compatible = "RK805_LDO3";
|
||||
regulator-name = "vdd_10";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&io_domains {
|
||||
status = "okay";
|
||||
|
||||
vccio1-supply = <&vcc_io>;
|
||||
vccio2-supply = <&vcc_io>;
|
||||
vccio4-supply = <&vcc_io>;
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
pmic {
|
||||
pmic_int_l: pmic-int-l {
|
||||
rockchip,pins = <1 12 RK_FUNC_GPIO &pcfg_pull_up>; /* gpio1_b4 */
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
host_vbus_drv: host-vbus-drv {
|
||||
rockchip,pins = <3 20 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
wireless-bluetooth {
|
||||
uart1_gpios: uart1-gpios {
|
||||
rockchip,pins = <1 11 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&u2phy0_host {
|
||||
phy-supply = <&vcc_host>;
|
||||
};
|
||||
Loading…
Add table
Add a link
Reference in a new issue