arm64: dts: rockchip: add rk3566 rock 3c
Signed-off-by: Mitchell Ma <machuang@radxa.com>
This commit is contained in:
parent
9c4245c8e5
commit
917a83099e
4 changed files with 1211 additions and 0 deletions
|
|
@ -165,6 +165,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-rk817-tablet.dtb
|
|||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-rk817-tablet-k108.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-rk817-tablet-rkg11.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-rk817-tablet-v10.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-rock-3c-aic8800ds2.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-rock-3c.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3567-evb2-lp4x-v10.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3567-evb2-lp4x-v10-dual-channel-lvds.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3567-evb2-lp4x-v10-one-vp-two-single-channel-lvds.dtb
|
||||
|
|
|
|||
127
arch/arm64/boot/dts/rockchip/rk3566-rock-3c-aic8800ds2.dts
Normal file
127
arch/arm64/boot/dts/rockchip/rk3566-rock-3c-aic8800ds2.dts
Normal file
|
|
@ -0,0 +1,127 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2020 Rockchip Electronics Co., Ltd.
|
||||
* Copyright (c) 2022 Radxa Computer (Shenzhen) Co., Ltd.
|
||||
*
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "rk3566-rock-3c.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Radxa ROCK3 Model C";
|
||||
compatible = "radxa,rock-3c-aic8800ds2", "radxa,rock-3c", "rockchip,rk3566";
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_enable_h>;
|
||||
/*
|
||||
* On the module itself this is one of these (depending
|
||||
* on the actual card populated):
|
||||
* - SDIO_RESET_L_WL_REG_ON
|
||||
* - PDN (power down when low)
|
||||
*/
|
||||
reset-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wireless_wlan: wireless-wlan {
|
||||
compatible = "wlan-platdata";
|
||||
rockchip,grf = <&grf>;
|
||||
WIFI,poweren_gpio = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
wireless_bluetooth: wireless-bluetooth {
|
||||
compatible = "bluetooth-platdata";
|
||||
uart_rts_gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default", "rts_gpio";
|
||||
pinctrl-0 = <&uart1m0_rtsn>;
|
||||
pinctrl-1 = <&uart1_gpios>;
|
||||
BT,reset_gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
|
||||
BT,wake_gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
|
||||
BT,wake_host_irq = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&sdmmc1 {
|
||||
supports-sdio;
|
||||
bus-width = <4>;
|
||||
disable-wp;
|
||||
cap-sd-highspeed;
|
||||
cap-sdio-irq;
|
||||
keep-power-in-suspend;
|
||||
non-removable;
|
||||
rockchip,default-sample-phase=<180>;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
|
||||
sd-uhs-sdr104;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
wifi {
|
||||
wifi_enable_h: wifi-enable-h {
|
||||
rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
wireless-bluetooth {
|
||||
uart1_gpios: uart1-gpios {
|
||||
rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
sdmmc1 {
|
||||
/omit-if-no-ref/
|
||||
sdmmc1_bus4: sdmmc1-bus4 {
|
||||
rockchip,pins =
|
||||
/* sdmmc1_d0 */
|
||||
<2 RK_PA3 1 &pcfg_pull_up_drv_level_12>,
|
||||
/* sdmmc1_d1 */
|
||||
<2 RK_PA4 1 &pcfg_pull_up_drv_level_12>,
|
||||
/* sdmmc1_d2 */
|
||||
<2 RK_PA5 1 &pcfg_pull_up_drv_level_12>,
|
||||
/* sdmmc1_d3 */
|
||||
<2 RK_PA6 1 &pcfg_pull_up_drv_level_12>;
|
||||
};
|
||||
|
||||
/omit-if-no-ref/
|
||||
sdmmc1_clk: sdmmc1-clk {
|
||||
rockchip,pins =
|
||||
/* sdmmc1_clk */
|
||||
<2 RK_PB0 1 &pcfg_pull_up_drv_level_12>;
|
||||
};
|
||||
|
||||
/omit-if-no-ref/
|
||||
sdmmc1_cmd: sdmmc1-cmd {
|
||||
rockchip,pins =
|
||||
/* sdmmc1_cmd */
|
||||
<2 RK_PA7 1 &pcfg_pull_up_drv_level_12>;
|
||||
};
|
||||
|
||||
/omit-if-no-ref/
|
||||
sdmmc1_det: sdmmc1-det {
|
||||
rockchip,pins =
|
||||
/* sdmmc1_det */
|
||||
<2 RK_PB2 1 &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
/omit-if-no-ref/
|
||||
sdmmc1_pwren: sdmmc1-pwren {
|
||||
rockchip,pins =
|
||||
/* sdmmc1_pwren */
|
||||
<2 RK_PB1 1 &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
107
arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts
Normal file
107
arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts
Normal file
|
|
@ -0,0 +1,107 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2020 Rockchip Electronics Co., Ltd.
|
||||
* Copyright (c) 2022 Radxa Computer (Shenzhen) Co., Ltd.
|
||||
*
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "rk3566-rock-3c.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Radxa ROCK3 Model C";
|
||||
compatible = "radxa,rock-3c-ap6256", "radxa,rock-3c", "rockchip,rk3566";
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
clocks = <&rk809 1>;
|
||||
clock-names = "ext_clock";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_enable_h>;
|
||||
/*
|
||||
* On the module itself this is one of these (depending
|
||||
* on the actual card populated):
|
||||
* - SDIO_RESET_L_WL_REG_ON
|
||||
* - PDN (power down when low)
|
||||
*/
|
||||
reset-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&sdmmc1 {
|
||||
max-frequency = <100000000>;
|
||||
supports-sdio;
|
||||
bus-width = <4>;
|
||||
disable-wp;
|
||||
cap-sd-highspeed;
|
||||
cap-sdio-irq;
|
||||
keep-power-in-suspend;
|
||||
non-removable;
|
||||
rockchip,default-sample-phase=<90>;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
|
||||
sd-uhs-sdr104;
|
||||
status = "okay";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
brcmf: wifi@1 {
|
||||
compatible = "brcm,bcm4329-fmac";
|
||||
reg = <1>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PB7 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "host-wake";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_host_wake_l>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm4345c5";
|
||||
clocks = <&rk809 1>;
|
||||
clock-names = "lpo";
|
||||
device-wakeup-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
|
||||
host-wakeup-gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
|
||||
shutdown-gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
|
||||
max-speed = <1500000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
|
||||
vbat-supply = <&vcc3v3_sys>;
|
||||
vddio-supply = <&vcc_1v8>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
wifi {
|
||||
wifi_enable_h: wifi-enable-h {
|
||||
rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
wifi_host_wake_l: wifi-host-wake-irq {
|
||||
rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
bt {
|
||||
bt_enable_h: bt-enable-h {
|
||||
rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
bt_host_wake_l: bt-host-wake-l {
|
||||
rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
bt_wake_l: bt-wake-l {
|
||||
rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
975
arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dtsi
Normal file
975
arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dtsi
Normal file
|
|
@ -0,0 +1,975 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2020 Rockchip Electronics Co., Ltd.
|
||||
* Copyright (c) 2022 Radxa Computer (Shenzhen) Co., Ltd.
|
||||
*
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include <dt-bindings/input/rk-input.h>
|
||||
#include <dt-bindings/display/drm_mipi_dsi.h>
|
||||
#include <dt-bindings/sensor-dev.h>
|
||||
#include "rk3566.dtsi"
|
||||
#include "rk3568-linux.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Radxa ROCK3 Model C";
|
||||
compatible = "radxa,rock-3c", "rockchip,rk3566";
|
||||
|
||||
/delete-node/ chosen;
|
||||
|
||||
fan0: pwm-fan {
|
||||
compatible = "pwm-fan";
|
||||
#cooling-cells = <2>;
|
||||
cooling-levels = <0 64 128 192 255>;
|
||||
pwms = <&pwm15 0 40000 0>;
|
||||
};
|
||||
|
||||
hdmi_sound: hdmi-sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,mclk-fs = <128>;
|
||||
simple-audio-card,name = "rockchip-hdmi0";
|
||||
status = "okay";
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&i2s0_8ch>;
|
||||
};
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&hdmi>;
|
||||
};
|
||||
};
|
||||
|
||||
rk809_sound: rk809-sound {
|
||||
status = "okay";
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,name = "rockchip-rk809";
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&i2s1_8ch>;
|
||||
};
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&rk809_codec>;
|
||||
};
|
||||
};
|
||||
|
||||
rk_headset: rk-headset {
|
||||
compatible = "rockchip_headset";
|
||||
headset_gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hp_det>;
|
||||
io-channels = <&saradc 3>; //HP_HOOK
|
||||
};
|
||||
|
||||
vcc_sys: vcc-5v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vcc3v3_sys: vcc3v3-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_host: vcc5v0-host-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_host_en>;
|
||||
regulator-name = "vcc5v0_host";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vcc5v0_otg: vcc5v0-otg-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_otg_en>;
|
||||
regulator-name = "vcc5v0_otg";
|
||||
};
|
||||
|
||||
pcie20_3v3: pcie20-3v3-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie20_3v3_en>;
|
||||
regulator-name = "pcie20_3v3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
status = "okay";
|
||||
|
||||
user-led1 {
|
||||
gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
default-state = "on";
|
||||
pinctrl-0 = <&led_ctl>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&pwm15 {
|
||||
pinctrl-names = "active";
|
||||
pinctrl-0 = <&pwm15m0_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&threshold {
|
||||
temperature = <60000>;
|
||||
};
|
||||
|
||||
&soc_thermal {
|
||||
sustainable-power = <5000>; /* milliwatts */
|
||||
cooling-maps {
|
||||
map3 {
|
||||
trip = <&target>;
|
||||
cooling-device =
|
||||
<&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
contribution = <8192>;
|
||||
};
|
||||
map4 {
|
||||
trip = <&threshold>;
|
||||
cooling-device =
|
||||
<&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
contribution = <8192>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&dfi {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rkcif {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rkcif_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rkisp {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rkisp_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&display_subsystem {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
status = "okay";
|
||||
preset_max_hdisplay = <1920>;
|
||||
preset_max_vdisplay = <1080>;
|
||||
};
|
||||
|
||||
&hdmi_in_vp0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_in_vp1 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&hdmi_sound {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&route_hdmi {
|
||||
status = "okay";
|
||||
connect = <&vp0_out_hdmi>;
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
vdd_cpu: tcs4525@1c {
|
||||
compatible = "tcs,tcs452x";
|
||||
reg = <0x1c>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
regulator-compatible = "fan53555-reg";
|
||||
regulator-name = "vdd_cpu";
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1390000>;
|
||||
regulator-init-microvolt = <1000000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
rk809: pmic@20 {
|
||||
compatible = "rockchip,rk809";
|
||||
reg = <0x20>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
pinctrl-names = "default", "pmic-sleep",
|
||||
"pmic-power-off", "pmic-reset";
|
||||
pinctrl-0 = <&pmic_int>;
|
||||
pinctrl-1 = <&soc_slppin_slp>, <&rk817_slppin_slp>;
|
||||
pinctrl-2 = <&soc_slppin_gpio>, <&rk817_slppin_pwrdn>;
|
||||
pinctrl-3 = <&soc_slppin_gpio>, <&rk817_slppin_rst>;
|
||||
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "rk808-clkout1", "rk808-clkout2";
|
||||
//fb-inner-reg-idxs = <2>;
|
||||
/* 1: rst regs (default in codes), 0: rst the pmic */
|
||||
pmic-reset-func = <0>;
|
||||
/* not save the PMIC_POWER_EN register in uboot */
|
||||
not-save-power-en = <1>;
|
||||
|
||||
vcc1-supply = <&vcc3v3_sys>;
|
||||
vcc2-supply = <&vcc3v3_sys>;
|
||||
vcc3-supply = <&vcc3v3_sys>;
|
||||
vcc4-supply = <&vcc3v3_sys>;
|
||||
vcc5-supply = <&vcc3v3_sys>;
|
||||
vcc6-supply = <&vcc3v3_sys>;
|
||||
vcc7-supply = <&vcc3v3_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc3v3_sys>;
|
||||
|
||||
pwrkey {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pinctrl_rk8xx: pinctrl_rk8xx {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
rk817_slppin_null: rk817_slppin_null {
|
||||
pins = "gpio_slp";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk817_slppin_slp: rk817_slppin_slp {
|
||||
pins = "gpio_slp";
|
||||
function = "pin_fun1";
|
||||
};
|
||||
|
||||
rk817_slppin_pwrdn: rk817_slppin_pwrdn {
|
||||
pins = "gpio_slp";
|
||||
function = "pin_fun2";
|
||||
};
|
||||
|
||||
rk817_slppin_rst: rk817_slppin_rst {
|
||||
pins = "gpio_slp";
|
||||
function = "pin_fun3";
|
||||
};
|
||||
};
|
||||
|
||||
regulators {
|
||||
vdd_logic: DCDC_REG1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-name = "vdd_logic";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: DCDC_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_npu: DCDC_REG4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-name = "vdd_npu";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_image: LDO_REG1 {
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-name = "vdda0v9_image";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda_0v9: LDO_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-name = "vdda_0v9";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_pmu: LDO_REG3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-name = "vdda0v9_pmu";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_acodec: LDO_REG4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-name = "vccio_acodec";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd: LDO_REG5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_pmu: LDO_REG6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc3v3_pmu";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_1v8: LDO_REG7 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcca_1v8";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_pmu: LDO_REG8 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcca1v8_pmu";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_image: LDO_REG9 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcca1v8_image";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: DCDC_REG5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3: SWITCH_REG1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc_3v3";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_sd: SWITCH_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc3v3_sd";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
rk809_codec: codec {
|
||||
#sound-dai-cells = <0>;
|
||||
compatible = "rockchip,rk809-codec", "rockchip,rk817-codec";
|
||||
clocks = <&cru I2S1_MCLKOUT>;
|
||||
clock-names = "mclk";
|
||||
assigned-clocks = <&cru I2S1_MCLKOUT>, <&cru I2S1_MCLK_TX_IOE>;
|
||||
assigned-clock-rates = <12288000>;
|
||||
assigned-clock-parents = <&cru I2S1_MCLKOUT_TX>, <&cru I2S1_MCLKOUT_TX>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2s1m0_mclk>;
|
||||
hp-volume = <20>;
|
||||
spk-volume = <3>;
|
||||
mic-in-differential;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
eeprom: at24c16@50 {
|
||||
status = "okay";
|
||||
compatible = "atmel,24c16";
|
||||
reg = <0x50>;
|
||||
pagesize = <16>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2s0_8ch {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s1_8ch {
|
||||
status = "okay";
|
||||
rockchip,clk-trcm = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2s1m0_sclktx
|
||||
&i2s1m0_lrcktx
|
||||
&i2s1m0_sdi0
|
||||
&i2s1m0_sdo0>;
|
||||
};
|
||||
|
||||
&iep {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&iep_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&jpegd {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&jpegd_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mpp_srv {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
status = "okay";
|
||||
pmuio2-supply = <&vcca1v8_pmu>;
|
||||
vccio1-supply = <&vccio_acodec>;
|
||||
vccio3-supply = <&vccio_sd>;
|
||||
vccio4-supply = <&vcca1v8_pmu>;
|
||||
vccio5-supply = <&vcc_3v3>;
|
||||
vccio6-supply = <&vcc_3v3>;
|
||||
vccio7-supply = <&vcc_3v3>;
|
||||
};
|
||||
|
||||
&rk_rga {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rkvdec {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rkvdec_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rkvenc {
|
||||
venc-supply = <&vdd_logic>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rkvenc_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rknpu {
|
||||
rknpu-supply = <&vdd_npu>;
|
||||
};
|
||||
|
||||
&saradc {
|
||||
status = "okay";
|
||||
vref-supply = <&vcca_1v8>;
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
supports-emmc;
|
||||
non-removable;
|
||||
max-frequency = <200000000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc0 {
|
||||
max-frequency = <150000000>;
|
||||
supports-sd;
|
||||
no-sdio;
|
||||
no-mmc;
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
num-slots = <1>;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc3v3_sys>;
|
||||
vqmmc-supply = <&vccio_sd>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
phy-mode = "rgmii";
|
||||
clock_in_out = "output";
|
||||
|
||||
snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
/* Reset time is 20ms, 100ms for rtl8211f */
|
||||
snps,reset-delays-us = <0 20000 100000>;
|
||||
|
||||
assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
|
||||
assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>;
|
||||
assigned-clock-rates = <0>, <125000000>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac1m1_miim
|
||||
&gmac1m1_tx_bus2
|
||||
&gmac1m1_rx_bus2
|
||||
&gmac1m1_rgmii_clk
|
||||
&gmac1m1_rgmii_bus>;
|
||||
|
||||
tx_delay = <0x47>;
|
||||
rx_delay = <0x27>;
|
||||
|
||||
phy-handle = <&rgmii_phy1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio1 {
|
||||
rgmii_phy1: phy@0 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0x0>;
|
||||
};
|
||||
};
|
||||
|
||||
&sfc {
|
||||
status = "okay";
|
||||
max-freq = <50000000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&fspi_pins>;
|
||||
|
||||
spi_flash: spi-flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0x0>;
|
||||
spi-max-frequency = <50000000>;
|
||||
spi-tx-bus-width = <1>;
|
||||
spi-rx-bus-width = <4>;
|
||||
status = "okay";
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
loader@0 {
|
||||
label = "loader";
|
||||
reg = <0x0 0x1000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0_host {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0_otg {
|
||||
vbus-supply = <&vcc5v0_otg>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1_host {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1_otg {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&usb2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd_dwc3 {
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd30 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbhost_dwc3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbhost30 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie2x1 {
|
||||
reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&pcie20_3v3>;
|
||||
pinctrl-0 = <&pcie20m2_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy1_usq {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy2_psq {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vdpu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vdpu_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vepu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vepu_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop {
|
||||
status = "okay";
|
||||
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
|
||||
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
|
||||
};
|
||||
|
||||
&vop_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rockchip_suspend {
|
||||
status = "okay";
|
||||
rockchip,sleep-debug-en = <1>;
|
||||
rockchip,sleep-mode-config = <
|
||||
(0
|
||||
| RKPM_SLP_CENTER_OFF
|
||||
| RKPM_SLP_HW_PLLS_OFF
|
||||
| RKPM_SLP_PMUALIVE_32K
|
||||
| RKPM_SLP_32K_PVTM
|
||||
)
|
||||
>;
|
||||
rockchip,wakeup-config = <
|
||||
(0
|
||||
| RKPM_GPIO_WKUP_EN
|
||||
| RKPM_USB_WKUP_EN
|
||||
)
|
||||
>;
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
pmic {
|
||||
pmic_int: pmic_int {
|
||||
rockchip,pins =
|
||||
<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
soc_slppin_gpio: soc_slppin_gpio {
|
||||
rockchip,pins =
|
||||
<0 RK_PA2 RK_FUNC_GPIO &pcfg_output_low_pull_down>;
|
||||
};
|
||||
|
||||
soc_slppin_slp: soc_slppin_slp {
|
||||
rockchip,pins =
|
||||
<0 RK_PA2 1 &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
soc_slppin_rst: soc_slppin_rst {
|
||||
rockchip,pins =
|
||||
<0 RK_PA2 2 &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pcie {
|
||||
pcie20_3v3_en: pcie20-3v3-en {
|
||||
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
vcc5v0_host_en: vcc5v0-host-en {
|
||||
rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
vcc5v0_otg_en: vcc5v0-otg-en {
|
||||
rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
headphone {
|
||||
hp_det: hp-det {
|
||||
rockchip,pins = <4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
led_ctl: led-ctl {
|
||||
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gpio0 {
|
||||
gpio-line-names =
|
||||
/* GPIO0_A0-A3 */
|
||||
"", "", "", "",
|
||||
/* GPIO0_A4-A7 */
|
||||
"", "", "", "",
|
||||
|
||||
/* GPIO0_B0-B3 */
|
||||
"", "", "", "",
|
||||
/* GPIO0_B4-B7 */
|
||||
"", "", "", "",
|
||||
|
||||
/* GPIO0_C0-C3 */
|
||||
"", "", "", "",
|
||||
/* GPIO0_C4-C7 */
|
||||
"", "", "", "",
|
||||
|
||||
/* GPIO0_D0-D3 */
|
||||
"PIN_10", "PIN_8", "", "",
|
||||
/* GPIO0_D4-D7 */
|
||||
"", "", "", "";
|
||||
};
|
||||
|
||||
&gpio1 {
|
||||
gpio-line-names =
|
||||
/* GPIO1_A0-A3 */
|
||||
"PIN_3", "PIN_5", "", "",
|
||||
/* GPIO1_A4-A7 */
|
||||
"PIN_37", "", "", "",
|
||||
|
||||
/* GPIO1_B0-B3 */
|
||||
"", "", "", "",
|
||||
/* GPIO1_B4-B7 */
|
||||
"", "", "", "",
|
||||
|
||||
/* GPIO1_C0-C3 */
|
||||
"", "", "", "",
|
||||
/* GPIO1_C4-C7 */
|
||||
"", "", "", "",
|
||||
|
||||
/* GPIO1_D0-D3 */
|
||||
"", "", "", "",
|
||||
/* GPIO1_D4-D7 */
|
||||
"", "", "", "";
|
||||
};
|
||||
|
||||
&gpio2 {
|
||||
gpio-line-names =
|
||||
/* GPIO2_A0-A3 */
|
||||
"", "", "", "",
|
||||
/* GPIO2_A4-A7 */
|
||||
"", "", "", "",
|
||||
|
||||
/* GPIO2_B0-B3 */
|
||||
"", "", "", "",
|
||||
/* GPIO2_B4-B7 */
|
||||
"", "", "", "",
|
||||
|
||||
/* GPIO2_C0-C3 */
|
||||
"", "", "", "",
|
||||
/* GPIO2_C4-C7 */
|
||||
"", "", "", "",
|
||||
|
||||
/* GPIO2_D0-D3 */
|
||||
"", "", "", "",
|
||||
/* GPIO2_D4-D7 */
|
||||
"", "", "", "";
|
||||
};
|
||||
|
||||
&gpio3 {
|
||||
gpio-line-names =
|
||||
/* GPIO3_A0-A3 */
|
||||
"", "PIN_11", "PIN_13", "PIN_12",
|
||||
/* GPIO3_A4-A7 */
|
||||
"PIN_35", "PIN_40", "PIN_38", "PIN_36",
|
||||
|
||||
/* GPIO3_B0-B3 */
|
||||
"PIN_15", "PIN_16", "PIN_18", "PIN_29",
|
||||
/* GPIO3_B4-B7 */
|
||||
"PIN_31", "", "", "",
|
||||
|
||||
/* GPIO3_C0-C3 */
|
||||
"", "PIN_22", "PIN_32", "PIN_33",
|
||||
/* GPIO3_C4-C7 */
|
||||
"PIN_7", "", "", "",
|
||||
|
||||
/* GPIO3_D0-D3 */
|
||||
"", "", "", "",
|
||||
/* GPIO3_D4-D7 */
|
||||
"", "", "", "";
|
||||
};
|
||||
|
||||
&gpio4 {
|
||||
gpio-line-names =
|
||||
/* GPIO4_A0-A3 */
|
||||
"", "", "", "",
|
||||
/* GPIO4_A4-A7 */
|
||||
"", "", "", "",
|
||||
|
||||
/* GPIO4_B0-B3 */
|
||||
"", "", "PIN_27", "PIN_28",
|
||||
/* GPIO4_B4-B7 */
|
||||
"", "", "", "",
|
||||
|
||||
/* GPIO4_C0-C3 */
|
||||
"", "", "PIN_23", "PIN_19",
|
||||
/* GPIO4_C4-C7 */
|
||||
"", "PIN_21", "PIN_24", "",
|
||||
|
||||
/* GPIO4_D0-D3 */
|
||||
"", "PIN_26", "", "",
|
||||
/* GPIO4_D4-D7 */
|
||||
"", "", "", "";
|
||||
};
|
||||
Loading…
Add table
Add a link
Reference in a new issue