From 33af509fc69d1723ca766d4961fcc6cb87c96351 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Wed, 17 Jan 2018 15:57:18 +0100 Subject: [PATCH 01/22] arm64: zynqmp: Use zynqmp specific compatible string for macb The patch "devicetree: Add compatible string for Zynq Ultrascale+ MPSoC" (commit <988d6f07fc0a29e392035ba56e3bcfaf7b397d95>) introduced specific compatible string for ZynqMP which should be used first. Signed-off-by: Michal Simek --- arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi index 7665fbddff28..0da98007753b 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi @@ -355,7 +355,7 @@ }; gem0: ethernet@ff0b0000 { - compatible = "cdns,gem"; + compatible = "cdns,zynqmp-gem", "cdns,gem"; status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 57 4>, <0 57 4>; @@ -366,7 +366,7 @@ }; gem1: ethernet@ff0c0000 { - compatible = "cdns,gem"; + compatible = "cdns,zynqmp-gem", "cdns,gem"; status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 59 4>, <0 59 4>; @@ -377,7 +377,7 @@ }; gem2: ethernet@ff0d0000 { - compatible = "cdns,gem"; + compatible = "cdns,zynqmp-gem", "cdns,gem"; status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 61 4>, <0 61 4>; @@ -388,7 +388,7 @@ }; gem3: ethernet@ff0e0000 { - compatible = "cdns,gem"; + compatible = "cdns,zynqmp-gem", "cdns,gem"; status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 63 4>, <0 63 4>; From 0f780ca012f2dc616a4ed3eb51a42170a39de1c3 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Wed, 17 Jan 2018 16:02:26 +0100 Subject: [PATCH 02/22] arm64: zynqmp: Fix alignment in dts files Trivial changes. Signed-off-by: Michal Simek --- arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts | 2 +- arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 8 ++++---- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts index bf552674a834..fe7c48b6fa78 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts @@ -47,7 +47,7 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - phy0: phy@0{ + phy0: phy@0 { reg = <0>; max-speed = <100>; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi index 0da98007753b..9ca4d1f83b51 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi @@ -439,10 +439,10 @@ device_type = "pci"; interrupt-parent = <&gic>; interrupts = <0 118 4>, - <0 117 4>, - <0 116 4>, - <0 115 4>, /* MSI_1 [63...32] */ - <0 114 4>; /* MSI_0 [31...0] */ + <0 117 4>, + <0 116 4>, + <0 115 4>, /* MSI_1 [63...32] */ + <0 114 4>; /* MSI_0 [31...0] */ interrupt-names = "misc", "dummy", "intx", "msi1", "msi0"; msi-parent = <&pcie>; From b9c7468279e2b414676c8309d1f5f41fce26fd18 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Wed, 17 Jan 2018 16:07:11 +0100 Subject: [PATCH 03/22] arm64: zynqmp: Add SPDX license identifier Add SPDX identifier as was done by for example by: "License cleanup: add SPDX GPL-2.0 license identifier to files with no license" (commit ) Signed-off-by: Michal Simek --- arch/arm64/boot/dts/xilinx/Makefile | 1 + arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi | 1 + arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts | 1 + arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 1 + 4 files changed, 4 insertions(+) diff --git a/arch/arm64/boot/dts/xilinx/Makefile b/arch/arm64/boot/dts/xilinx/Makefile index a2d67084a514..eba179b23b17 100644 --- a/arch/arm64/boot/dts/xilinx/Makefile +++ b/arch/arm64/boot/dts/xilinx/Makefile @@ -1 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-ep108.dtb diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi index b87b8316f4ac..9f5eedbc2139 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * clock specification for Xilinx ZynqMP ep108 development board * diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts index fe7c48b6fa78..84fe7057fcb0 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * dts file for Xilinx ZynqMP ep108 development board * diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi index 9ca4d1f83b51..a091e6f03014 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * dts file for Xilinx ZynqMP * From c9214380db6c773806145749fe701d570308d31e Mon Sep 17 00:00:00 2001 From: Anurag Kumar Vulisha Date: Thu, 5 Nov 2015 17:21:37 +0530 Subject: [PATCH 04/22] arm64: zynqmp: Added OOB timing settings in zynqmp-ep108.dts This patch adds the sata port phy OOB timing values in the sata device-tree node. Signed-off-by: Anurag Kumar Vulisha Signed-off-by: Michal Simek --- arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts index 84fe7057fcb0..10dcd2fbee5a 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts @@ -79,6 +79,15 @@ &sata { status = "okay"; ceva,broken-gen2; + /* SATA Phy OOB timing settings */ + ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>; + ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>; + ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>; + ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>; + ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>; + ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>; + ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>; + ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>; }; &sdhci0 { From 2250e0413b55f2c13bbdce3ccfde2e7d87bd77ac Mon Sep 17 00:00:00 2001 From: P L Sai Krishna Date: Thu, 7 Jan 2016 14:57:27 +0530 Subject: [PATCH 05/22] arm64: zynqmp: Add 8-bit bus width property for ep108 This patch add 8-bit bus width property to eMMC node. Signed-off-by: P L Sai Krishna Signed-off-by: Michal Simek --- arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts index 10dcd2fbee5a..4b0684911626 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts @@ -92,6 +92,7 @@ &sdhci0 { status = "okay"; + bus-width = <8>; }; &sdhci1 { From a7a16068ad9da8b5d0c75449a5d80ef3a4b01fd9 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 23 Feb 2018 15:19:28 +0100 Subject: [PATCH 06/22] dt-bindings: xilinx: Add description for ZynqMP Record xlnx,zynqmp compatible string. Signed-off-by: Michal Simek Reviewed-by: Rob Herring --- Documentation/devicetree/bindings/arm/xilinx.txt | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/xilinx.txt b/Documentation/devicetree/bindings/arm/xilinx.txt index 1f7995357888..549e70a022cb 100644 --- a/Documentation/devicetree/bindings/arm/xilinx.txt +++ b/Documentation/devicetree/bindings/arm/xilinx.txt @@ -5,3 +5,13 @@ shall have the following properties. Required root node properties: - compatible = "xlnx,zynq-7000"; + +--------------------------------------------------------------- + +Xilinx Zynq UltraScale+ MPSoC Platforms Device Tree Bindings + +Boards with ZynqMP SOC based on an ARM Cortex A53 processor +shall have the following properties. + +Required root node properties: + - compatible = "xlnx,zynqmp"; From 5869ba0653b903587e2b8cfb530656a5c0441c03 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 7 Jan 2016 14:57:27 +0530 Subject: [PATCH 07/22] arm64: zynqmp: Add support for Xilinx zcu100-revC This board has 2GB of memory, i2c, sd, wifi sdio, spis, uarts, display port and usbs. Board is using fixed clocks because clock driver hasn't been merged yet. Signed-off-by: Michal Simek Reviewed-by: Rob Herring --- .../devicetree/bindings/arm/xilinx.txt | 6 + arch/arm64/boot/dts/xilinx/Makefile | 1 + arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi | 213 +++++++++++++ .../boot/dts/xilinx/zynqmp-zcu100-revC.dts | 289 ++++++++++++++++++ 4 files changed, 509 insertions(+) create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts diff --git a/Documentation/devicetree/bindings/arm/xilinx.txt b/Documentation/devicetree/bindings/arm/xilinx.txt index 549e70a022cb..29039b645807 100644 --- a/Documentation/devicetree/bindings/arm/xilinx.txt +++ b/Documentation/devicetree/bindings/arm/xilinx.txt @@ -15,3 +15,9 @@ shall have the following properties. Required root node properties: - compatible = "xlnx,zynqmp"; + + +Additional compatible strings: + +- Xilinx 96boards compatible board zcu100 + "xlnx,zynqmp-zcu100-revC", "xlnx,zynqmp-zcu100" diff --git a/arch/arm64/boot/dts/xilinx/Makefile b/arch/arm64/boot/dts/xilinx/Makefile index eba179b23b17..7266a6a9c0cd 100644 --- a/arch/arm64/boot/dts/xilinx/Makefile +++ b/arch/arm64/boot/dts/xilinx/Makefile @@ -1,2 +1,3 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-ep108.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu100-revC.dtb diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi new file mode 100644 index 000000000000..9c09baca7dd7 --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi @@ -0,0 +1,213 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Clock specification for Xilinx ZynqMP + * + * (C) Copyright 2015 - 2018, Xilinx, Inc. + * + * Michal Simek + */ + +/ { + clk100: clk100 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + + clk125: clk125 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + clk200: clk200 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + + clk250: clk250 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <250000000>; + }; + + clk300: clk300 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <300000000>; + }; + + clk600: clk600 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <600000000>; + }; + + dp_aclk: clock0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-accuracy = <100>; + }; + + dp_aud_clk: clock1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + clock-accuracy = <100>; + }; + + dpdma_clk: dpdma_clk { + compatible = "fixed-clock"; + #clock-cells = <0x0>; + clock-frequency = <533000000>; + }; + + drm_clock: drm_clock { + compatible = "fixed-clock"; + #clock-cells = <0x0>; + clock-frequency = <262750000>; + clock-accuracy = <0x64>; + }; +}; + +&can0 { + clocks = <&clk100 &clk100>; +}; + +&can1 { + clocks = <&clk100 &clk100>; +}; + +&fpd_dma_chan1 { + clocks = <&clk600>, <&clk100>; +}; + +&fpd_dma_chan2 { + clocks = <&clk600>, <&clk100>; +}; + +&fpd_dma_chan3 { + clocks = <&clk600>, <&clk100>; +}; + +&fpd_dma_chan4 { + clocks = <&clk600>, <&clk100>; +}; + +&fpd_dma_chan5 { + clocks = <&clk600>, <&clk100>; +}; + +&fpd_dma_chan6 { + clocks = <&clk600>, <&clk100>; +}; + +&fpd_dma_chan7 { + clocks = <&clk600>, <&clk100>; +}; + +&fpd_dma_chan8 { + clocks = <&clk600>, <&clk100>; +}; + +&lpd_dma_chan1 { + clocks = <&clk600>, <&clk100>; +}; + +&lpd_dma_chan2 { + clocks = <&clk600>, <&clk100>; +}; + +&lpd_dma_chan3 { + clocks = <&clk600>, <&clk100>; +}; + +&lpd_dma_chan4 { + clocks = <&clk600>, <&clk100>; +}; + +&lpd_dma_chan5 { + clocks = <&clk600>, <&clk100>; +}; + +&lpd_dma_chan6 { + clocks = <&clk600>, <&clk100>; +}; + +&lpd_dma_chan7 { + clocks = <&clk600>, <&clk100>; +}; + +&lpd_dma_chan8 { + clocks = <&clk600>, <&clk100>; +}; + +&gem0 { + clocks = <&clk125>, <&clk125>, <&clk125>; +}; + +&gem1 { + clocks = <&clk125>, <&clk125>, <&clk125>; +}; + +&gem2 { + clocks = <&clk125>, <&clk125>, <&clk125>; +}; + +&gem3 { + clocks = <&clk125>, <&clk125>, <&clk125>; +}; + +&gpio { + clocks = <&clk100>; +}; + +&i2c0 { + clocks = <&clk100>; +}; + +&i2c1 { + clocks = <&clk100>; +}; + +&sata { + clocks = <&clk250>; +}; + +&sdhci0 { + clocks = <&clk200 &clk200>; +}; + +&sdhci1 { + clocks = <&clk200 &clk200>; +}; + +&spi0 { + clocks = <&clk200 &clk200>; +}; + +&spi1 { + clocks = <&clk200 &clk200>; +}; + +&uart0 { + clocks = <&clk100 &clk100>; +}; + +&uart1 { + clocks = <&clk100 &clk100>; +}; + +&usb0 { + clocks = <&clk250>, <&clk250>; +}; + +&usb1 { + clocks = <&clk250>, <&clk250>; +}; + +&watchdog0 { + clocks = <&clk250>; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts new file mode 100644 index 000000000000..3e862a9faf26 --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts @@ -0,0 +1,289 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP ZCU100 revC + * + * (C) Copyright 2016 - 2018, Xilinx, Inc. + * + * Michal Simek + * Nathalie Chan King Choy + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk.dtsi" +#include +#include +#include + +/ { + model = "ZynqMP ZCU100 RevC"; + compatible = "xlnx,zynqmp-zcu100-revC", "xlnx,zynqmp-zcu100", "xlnx,zynqmp"; + + aliases { + i2c0 = &i2c1; + rtc0 = &rtc; + serial0 = &uart1; + serial1 = &uart0; + serial2 = &dcc; + spi0 = &spi0; + spi1 = &spi1; + mmc0 = &sdhci0; + mmc1 = &sdhci1; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + sw4 { + label = "sw4"; + gpios = <&gpio 23 GPIO_ACTIVE_LOW>; + linux,code = ; + gpio-key,wakeup; + autorepeat; + }; + }; + + leds { + compatible = "gpio-leds"; + ds2 { + label = "ds2"; + gpios = <&gpio 20 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + ds3 { + label = "ds3"; + gpios = <&gpio 19 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; /* WLAN tx */ + default-state = "off"; + }; + + ds4 { + label = "ds4"; + gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0rx"; /* WLAN rx */ + default-state = "off"; + }; + + ds5 { + label = "ds5"; + gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "bluetooth-power"; + }; + + vbus_det { /* U5 USB5744 VBUS detection via MIO25 */ + label = "vbus_det"; + gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + bt_power { + label = "bt_power"; + gpios = <&gpio 8 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + wmmcsdio_fixed: fixedregulator-mmcsdio { + compatible = "regulator-fixed"; + regulator-name = "wmmcsdio_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + sdio_pwrseq: sdio_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio 7 GPIO_ACTIVE_LOW>; /* WIFI_EN */ + }; +}; + +&dcc { + status = "okay"; +}; + +&gpio { + status = "okay"; + gpio-line-names = "UART1_TX", "UART1_RX", "UART0_RX", "UART0_TX", "I2C1_SCL", + "I2C1_SDA", "SPI1_SCLK", "WLAN_EN", "BT_EN", "SPI1_CS", + "SPI1_MISO", "SPI1_MOSI", "I2C_MUX_RESET", "SD0_DAT0", "SD0_DAT1", + "SD0_DAT2", "SD0_DAT3", "PS_LED3", "PS_LED2", "PS_LED1", + "PS_LED0", "SD0_CMD", "SD0_CLK", "GPIO_PB", "SD0_DETECT", + "VBUS_DET", "POWER_INT", "DP_AUX", "DP_HPD", "DP_OE", + "DP_AUX_IN", "INA226_ALERT", "PS_FP_PWR_EN", "PL_PWR_EN", "POWER_KILL", + "", "GPIO-A", "GPIO-B", "SPI0_SCLK", "GPIO-C", + "GPIO-D", "SPI0_CS", "SPI0_MISO", "SPI_MOSI", "GPIO-E", + "GPIO-F", "SD1_D0", "SD1_D1", "SD1_D2", "SD1_D3", + "SD1_CMD", "SD1_CLK", "USB0_CLK", "USB0_DIR", "USB0_DATA2", + "USB0_NXT", "USB0_DATA0", "USB0_DATA1", "USB0_STP", "USB0_DATA3", + "USB0_DATA4", "USB0_DATA5", "USB0_DATA6", "USB0_DATA7", "USB1_CLK", + "USB1_DIR", "USB1_DATA2", "USB1_NXT", "USB1_DATA0", "USB1_DATA1", + "USB1_STP", "USB1_DATA3", "USB1_DATA4", "USB1_DATA5", "USB1_DATA6", + "USB_DATA7", "WLAN_IRQ", "PMIC_IRQ", /* MIO end and EMIO start */ + "", "", + "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", + "", "", "", ""; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <100000>; + i2c-mux@75 { /* u11 */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x75>; + i2csw_0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + label = "LS-I2C0"; + }; + i2csw_1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + label = "LS-I2C1"; + }; + i2csw_2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + label = "HS-I2C2"; + }; + i2csw_3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + label = "HS-I2C3"; + }; + i2csw_4: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4>; + + pmic: pmic@5e { /* Custom TI PMIC u33 */ + compatible = "ti,tps65086"; + reg = <0x5e>; + interrupt-parent = <&gpio>; + interrupts = <77 GPIO_ACTIVE_LOW>; + #gpio-cells = <2>; + gpio-controller; + }; + }; + i2csw_5: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + /* PS_PMBUS */ + ina226@40 { /* u35 */ + compatible = "ti,ina226"; + reg = <0x40>; + shunt-resistor = <10000>; + /* MIO31 is alert which should be routed to PMUFW */ + }; + }; + i2csw_6: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + /* + * Not Connected + */ + }; + i2csw_7: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + /* + * usb5744 (DNP) - U5 + * 100kHz - this is default freq for us + */ + }; + }; +}; + +&rtc { + status = "okay"; +}; + +/* SD0 only supports 3.3V, no level shifter */ +&sdhci0 { + status = "okay"; + no-1-8-v; + broken-cd; /* CD has to be enabled by default */ + disable-wp; +}; + +&sdhci1 { + status = "okay"; + bus-width = <0x4>; + non-removable; + disable-wp; + cap-power-off-card; + mmc-pwrseq = <&sdio_pwrseq>; + vqmmc-supply = <&wmmcsdio_fixed>; + #address-cells = <1>; + #size-cells = <0>; + wlcore: wifi@2 { + compatible = "ti,wl1831"; + reg = <2>; + interrupt-parent = <&gpio>; + interrupts = <76 IRQ_TYPE_EDGE_RISING>; /* MIO76 WLAN_IRQ 1V8 */ + }; +}; + +&spi0 { /* Low Speed connector */ + status = "okay"; + label = "LS-SPI0"; +}; + +&spi1 { /* High Speed connector */ + status = "okay"; + label = "HS-SPI1"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; + +}; + +/* ULPI SMSC USB3320 */ +&usb0 { + status = "okay"; +}; + +/* ULPI SMSC USB3320 */ +&usb1 { + status = "okay"; +}; + +&watchdog0 { + status = "okay"; +}; From ef797b53705c18773b03cd7d8b60a25c904e7a4f Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 18 Jan 2018 15:52:47 +0100 Subject: [PATCH 08/22] arm64: zynqmp: Add support for Xilinx zcu102 This patch is adding revA, revB and rev1.0. There are also other revisions between which should be backward compatible with previous versions. Unfortunately all revs are still in use. Signed-off-by: Michal Simek Reviewed-by: Rob Herring --- .../devicetree/bindings/arm/xilinx.txt | 5 + arch/arm64/boot/dts/xilinx/Makefile | 3 + .../boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts | 36 ++ .../boot/dts/xilinx/zynqmp-zcu102-revA.dts | 548 ++++++++++++++++++ .../boot/dts/xilinx/zynqmp-zcu102-revB.dts | 40 ++ 5 files changed, 632 insertions(+) create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts diff --git a/Documentation/devicetree/bindings/arm/xilinx.txt b/Documentation/devicetree/bindings/arm/xilinx.txt index 29039b645807..2b922ec3c82a 100644 --- a/Documentation/devicetree/bindings/arm/xilinx.txt +++ b/Documentation/devicetree/bindings/arm/xilinx.txt @@ -21,3 +21,8 @@ Additional compatible strings: - Xilinx 96boards compatible board zcu100 "xlnx,zynqmp-zcu100-revC", "xlnx,zynqmp-zcu100" + +- Xilinx evaluation board zcu102 + "xlnx,zynqmp-zcu102-revA", "xlnx,zynqmp-zcu102" + "xlnx,zynqmp-zcu102-revB", "xlnx,zynqmp-zcu102" + "xlnx,zynqmp-zcu102-rev1.0", "xlnx,zynqmp-zcu102" diff --git a/arch/arm64/boot/dts/xilinx/Makefile b/arch/arm64/boot/dts/xilinx/Makefile index 7266a6a9c0cd..24e3ce801304 100644 --- a/arch/arm64/boot/dts/xilinx/Makefile +++ b/arch/arm64/boot/dts/xilinx/Makefile @@ -1,3 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-ep108.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu100-revC.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-revA.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-revB.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-rev1.0.dtb diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts new file mode 100644 index 000000000000..6647e97edba3 --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP ZCU102 Rev1.0 + * + * (C) Copyright 2016 - 2018, Xilinx, Inc. + * + * Michal Simek + */ + +#include "zynqmp-zcu102-revB.dts" + +/ { + model = "ZynqMP ZCU102 Rev1.0"; + compatible = "xlnx,zynqmp-zcu102-rev1.0", "xlnx,zynqmp-zcu102", "xlnx,zynqmp"; +}; + +&eeprom { + #address-cells = <1>; + #size-cells = <1>; + + board_sn: board-sn@0 { + reg = <0x0 0x14>; + }; + + eth_mac: eth-mac@20 { + reg = <0x20 0x6>; + }; + + board_name: board-name@d0 { + reg = <0xd0 0x6>; + }; + + board_revision: board-revision@e0 { + reg = <0xe0 0x3>; + }; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts new file mode 100644 index 000000000000..5b4ffe646a9b --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts @@ -0,0 +1,548 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP ZCU102 RevA + * + * (C) Copyright 2015 - 2018, Xilinx, Inc. + * + * Michal Simek + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk.dtsi" +#include +#include + +/ { + model = "ZynqMP ZCU102 RevA"; + compatible = "xlnx,zynqmp-zcu102-revA", "xlnx,zynqmp-zcu102", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem3; + i2c0 = &i2c0; + i2c1 = &i2c1; + mmc0 = &sdhci1; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &dcc; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + sw19 { + label = "sw19"; + gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; + linux,code = ; + gpio-key,wakeup; + autorepeat; + }; + }; + + leds { + compatible = "gpio-leds"; + heartbeat_led { + label = "heartbeat"; + gpios = <&gpio 23 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&can1 { + status = "okay"; +}; + +&dcc { + status = "okay"; +}; + +&fpd_dma_chan1 { + status = "okay"; +}; + +&fpd_dma_chan2 { + status = "okay"; +}; + +&fpd_dma_chan3 { + status = "okay"; +}; + +&fpd_dma_chan4 { + status = "okay"; +}; + +&fpd_dma_chan5 { + status = "okay"; +}; + +&fpd_dma_chan6 { + status = "okay"; +}; + +&fpd_dma_chan7 { + status = "okay"; +}; + +&fpd_dma_chan8 { + status = "okay"; +}; + +&gem3 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + phy0: phy@21 { + reg = <21>; + ti,rx-internal-delay = <0x8>; + ti,tx-internal-delay = <0xa>; + ti,fifo-depth = <0x1>; + }; +}; + +&gpio { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + tca6416_u97: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + /* + * IRQ not connected + * Lines: + * 0 - PS_GTR_LAN_SEL0 + * 1 - PS_GTR_LAN_SEL1 + * 2 - PS_GTR_LAN_SEL2 + * 3 - PS_GTR_LAN_SEL3 + * 4 - PCI_CLK_DIR_SEL + * 5 - IIC_MUX_RESET_B + * 6 - GEM3_EXP_RESET_B + * 7, 10 - 17 - not connected + */ + + gtr_sel0 { + gpio-hog; + gpios = <0 0>; + output-low; /* PCIE = 0, DP = 1 */ + line-name = "sel0"; + }; + gtr_sel1 { + gpio-hog; + gpios = <1 0>; + output-high; /* PCIE = 0, DP = 1 */ + line-name = "sel1"; + }; + gtr_sel2 { + gpio-hog; + gpios = <2 0>; + output-high; /* PCIE = 0, USB0 = 1 */ + line-name = "sel2"; + }; + gtr_sel3 { + gpio-hog; + gpios = <3 0>; + output-high; /* PCIE = 0, SATA = 1 */ + line-name = "sel3"; + }; + }; + + tca6416_u61: gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + /* + * IRQ not connected + * Lines: + * 0 - VCCPSPLL_EN + * 1 - MGTRAVCC_EN + * 2 - MGTRAVTT_EN + * 3 - VCCPSDDRPLL_EN + * 4 - MIO26_PMU_INPUT_LS + * 5 - PL_PMBUS_ALERT + * 6 - PS_PMBUS_ALERT + * 7 - MAXIM_PMBUS_ALERT + * 10 - PL_DDR4_VTERM_EN + * 11 - PL_DDR4_VPP_2V5_EN + * 12 - PS_DIMM_VDDQ_TO_PSVCCO_ON + * 13 - PS_DIMM_SUSPEND_EN + * 14 - PS_DDR4_VTERM_EN + * 15 - PS_DDR4_VPP_2V5_EN + * 16 - 17 - not connected + */ + }; + + i2c-mux@75 { /* u60 */ + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x75>; + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* PS_PMBUS */ + ina226@40 { /* u76 */ + compatible = "ti,ina226"; + reg = <0x40>; + shunt-resistor = <5000>; + }; + ina226@41 { /* u77 */ + compatible = "ti,ina226"; + reg = <0x41>; + shunt-resistor = <5000>; + }; + ina226@42 { /* u78 */ + compatible = "ti,ina226"; + reg = <0x42>; + shunt-resistor = <5000>; + }; + ina226@43 { /* u87 */ + compatible = "ti,ina226"; + reg = <0x43>; + shunt-resistor = <5000>; + }; + ina226@44 { /* u85 */ + compatible = "ti,ina226"; + reg = <0x44>; + shunt-resistor = <5000>; + }; + ina226@45 { /* u86 */ + compatible = "ti,ina226"; + reg = <0x45>; + shunt-resistor = <5000>; + }; + ina226@46 { /* u93 */ + compatible = "ti,ina226"; + reg = <0x46>; + shunt-resistor = <5000>; + }; + ina226@47 { /* u88 */ + compatible = "ti,ina226"; + reg = <0x47>; + shunt-resistor = <5000>; + }; + ina226@4a { /* u15 */ + compatible = "ti,ina226"; + reg = <0x4a>; + shunt-resistor = <5000>; + }; + ina226@4b { /* u92 */ + compatible = "ti,ina226"; + reg = <0x4b>; + shunt-resistor = <5000>; + }; + }; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* PL_PMBUS */ + ina226@40 { /* u79 */ + compatible = "ti,ina226"; + reg = <0x40>; + shunt-resistor = <2000>; + }; + ina226@41 { /* u81 */ + compatible = "ti,ina226"; + reg = <0x41>; + shunt-resistor = <5000>; + }; + ina226@42 { /* u80 */ + compatible = "ti,ina226"; + reg = <0x42>; + shunt-resistor = <5000>; + }; + ina226@43 { /* u84 */ + compatible = "ti,ina226"; + reg = <0x43>; + shunt-resistor = <5000>; + }; + ina226@44 { /* u16 */ + compatible = "ti,ina226"; + reg = <0x44>; + shunt-resistor = <5000>; + }; + ina226@45 { /* u65 */ + compatible = "ti,ina226"; + reg = <0x45>; + shunt-resistor = <5000>; + }; + ina226@46 { /* u74 */ + compatible = "ti,ina226"; + reg = <0x46>; + shunt-resistor = <5000>; + }; + ina226@47 { /* u75 */ + compatible = "ti,ina226"; + reg = <0x47>; + shunt-resistor = <5000>; + }; + }; + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + /* MAXIM_PMBUS - 00 */ + max15301@a { /* u46 */ + compatible = "maxim,max15301"; + reg = <0xa>; + }; + max15303@b { /* u4 */ + compatible = "maxim,max15303"; + reg = <0xb>; + }; + max15303@10 { /* u13 */ + compatible = "maxim,max15303"; + reg = <0x10>; + }; + max15301@13 { /* u47 */ + compatible = "maxim,max15301"; + reg = <0x13>; + }; + max15303@14 { /* u7 */ + compatible = "maxim,max15303"; + reg = <0x14>; + }; + max15303@15 { /* u6 */ + compatible = "maxim,max15303"; + reg = <0x15>; + }; + max15303@16 { /* u10 */ + compatible = "maxim,max15303"; + reg = <0x16>; + }; + max15303@17 { /* u9 */ + compatible = "maxim,max15303"; + reg = <0x17>; + }; + max15301@18 { /* u63 */ + compatible = "maxim,max15301"; + reg = <0x18>; + }; + max15303@1a { /* u49 */ + compatible = "maxim,max15303"; + reg = <0x1a>; + }; + max15303@1d { /* u18 */ + compatible = "maxim,max15303"; + reg = <0x1d>; + }; + max15303@20 { /* u8 */ + compatible = "maxim,max15303"; + status = "disabled"; /* unreachable */ + reg = <0x20>; + }; + + max20751@72 { /* u95 */ + compatible = "maxim,max20751"; + reg = <0x72>; + }; + max20751@73 { /* u96 */ + compatible = "maxim,max20751"; + reg = <0x73>; + }; + }; + /* Bus 3 is not connected */ + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + /* PL i2c via PCA9306 - u45 */ + i2c-mux@74 { /* u34 */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* + * IIC_EEPROM 1kB memory which uses 256B blocks + * where every block has different address. + * 0 - 256B address 0x54 + * 256B - 512B address 0x55 + * 512B - 768B address 0x56 + * 768B - 1024B address 0x57 + */ + eeprom: eeprom@54 { /* u23 */ + compatible = "atmel,24c08"; + reg = <0x54>; + }; + }; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + si5341: clock-generator@36 { /* SI5341 - u69 */ + reg = <0x36>; + }; + + }; + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + si570_1: clock-generator@5d { /* USER SI570 - u42 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; + temperature-stability = <50>; + factory-fout = <300000000>; + clock-frequency = <300000000>; + }; + }; + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + si570_2: clock-generator@5d { /* USER MGT SI570 - u56 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; + temperature-stability = <50>; /* copy from zc702 */ + factory-fout = <156250000>; + clock-frequency = <148500000>; + }; + }; + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + si5328: clock-generator@69 {/* SI5328 - u20 */ + reg = <0x69>; + /* + * Chip has interrupt present connected to PL + * interrupt-parent = <&>; + * interrupts = <>; + */ + }; + }; + /* 5 - 7 unconnected */ + }; + + i2c-mux@75 { + compatible = "nxp,pca9548"; /* u135 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <0x75>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* HPC0_IIC */ + }; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* HPC1_IIC */ + }; + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + /* SYSMON */ + }; + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + /* DDR4 SODIMM */ + }; + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + /* SEP 3 */ + }; + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + /* SEP 2 */ + }; + i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + /* SEP 1 */ + }; + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + /* SEP 0 */ + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&sata { + status = "okay"; + /* SATA OOB timing settings */ + ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; +}; + +/* SD1 with level shifter */ +&sdhci1 { + status = "okay"; + no-1-8-v; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +/* ULPI SMSC USB3320 */ +&usb0 { + status = "okay"; +}; + +&watchdog0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts new file mode 100644 index 000000000000..af4d86882a5c --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP ZCU102 RevB + * + * (C) Copyright 2016 - 2018, Xilinx, Inc. + * + * Michal Simek + */ + +#include "zynqmp-zcu102-revA.dts" + +/ { + model = "ZynqMP ZCU102 RevB"; + compatible = "xlnx,zynqmp-zcu102-revB", "xlnx,zynqmp-zcu102", "xlnx,zynqmp"; +}; + +&gem3 { + phy-handle = <&phyc>; + phyc: phy@c { + reg = <0xc>; + ti,rx-internal-delay = <0x8>; + ti,tx-internal-delay = <0xa>; + ti,fifo-depth = <0x1>; + }; + /* Cleanup from RevA */ + /delete-node/ phy@21; +}; + +/* Fix collision with u61 */ +&i2c0 { + i2c-mux@75 { + i2c@2 { + max15303@1b { /* u8 */ + compatible = "maxim,max15303"; + reg = <0x1b>; + }; + /delete-node/ max15303@20; + }; + }; +}; From 612eac3b72fa00aebb41d1e29cbf00daaffc07ac Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 18 Jan 2018 16:10:05 +0100 Subject: [PATCH 09/22] arm64: zynqmp: Add support for Xilinx zcu104-revA Xilinx zcu104 is another customer board. It is sort of zcu102 clone with some differences. Signed-off-by: Michal Simek Reviewed-by: Rob Herring --- .../devicetree/bindings/arm/xilinx.txt | 3 + arch/arm64/boot/dts/xilinx/Makefile | 1 + .../boot/dts/xilinx/zynqmp-zcu104-revA.dts | 195 ++++++++++++++++++ 3 files changed, 199 insertions(+) create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts diff --git a/Documentation/devicetree/bindings/arm/xilinx.txt b/Documentation/devicetree/bindings/arm/xilinx.txt index 2b922ec3c82a..a9ce08a68711 100644 --- a/Documentation/devicetree/bindings/arm/xilinx.txt +++ b/Documentation/devicetree/bindings/arm/xilinx.txt @@ -26,3 +26,6 @@ Additional compatible strings: "xlnx,zynqmp-zcu102-revA", "xlnx,zynqmp-zcu102" "xlnx,zynqmp-zcu102-revB", "xlnx,zynqmp-zcu102" "xlnx,zynqmp-zcu102-rev1.0", "xlnx,zynqmp-zcu102" + +- Xilinx evaluation board zcu104 + "xlnx,zynqmp-zcu104-revA", "xlnx,zynqmp-zcu104" diff --git a/arch/arm64/boot/dts/xilinx/Makefile b/arch/arm64/boot/dts/xilinx/Makefile index 24e3ce801304..1c039e59c7c3 100644 --- a/arch/arm64/boot/dts/xilinx/Makefile +++ b/arch/arm64/boot/dts/xilinx/Makefile @@ -4,3 +4,4 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu100-revC.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-revA.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-revB.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-rev1.0.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu104-revA.dtb diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts new file mode 100644 index 000000000000..d4ad19a38c93 --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts @@ -0,0 +1,195 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP ZCU104 + * + * (C) Copyright 2017 - 2018, Xilinx, Inc. + * + * Michal Simek + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk.dtsi" +#include + +/ { + model = "ZynqMP ZCU104 RevA"; + compatible = "xlnx,zynqmp-zcu104-revA", "xlnx,zynqmp-zcu104", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem3; + i2c0 = &i2c1; + mmc0 = &sdhci1; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &dcc; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; +}; + +&can1 { + status = "okay"; +}; + +&dcc { + status = "okay"; +}; + +&gem3 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + phy0: phy@c { + reg = <0xc>; + ti,rx-internal-delay = <0x8>; + ti,tx-internal-delay = <0xa>; + ti,fifo-depth = <0x1>; + }; +}; + +&gpio { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + /* Another connection to this bus via PL i2c via PCA9306 - u45 */ + i2c-mux@74 { /* u34 */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* + * IIC_EEPROM 1kB memory which uses 256B blocks + * where every block has different address. + * 0 - 256B address 0x54 + * 256B - 512B address 0x55 + * 512B - 768B address 0x56 + * 768B - 1024B address 0x57 + */ + eeprom@54 { /* u23 */ + compatible = "atmel,24c08"; + reg = <0x54>; + #address-cells = <1>; + #size-cells = <1>; + }; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + clock_8t49n287: clock-generator@6c { /* 8T49N287 - u182 */ + reg = <0x6c>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + irps5401_43: irps54012@43 { /* IRPS5401 - u175 */ + reg = <0x43>; + }; + irps5401_4d: irps54012@4d { /* IRPS5401 - u180 */ + reg = <0x4d>; + }; + }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + tca6416_u97: gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + /* + * IRQ not connected + * Lines: + * 0 - IRPS5401_ALERT_B + * 1 - HDMI_8T49N241_INT_ALM + * 2 - MAX6643_OT_B + * 3 - MAX6643_FANFAIL_B + * 5 - IIC_MUX_RESET_B + * 6 - GEM3_EXP_RESET_B + * 7 - FMC_LPC_PRSNT_M2C_B + * 4, 10 - 17 - not connected + */ + }; + }; + + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + + /* 3, 6 not connected */ + }; +}; + +&rtc { + status = "okay"; +}; + +&sata { + status = "okay"; + /* SATA OOB timing settings */ + ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; +}; + +/* SD1 with level shifter */ +&sdhci1 { + status = "okay"; + no-1-8-v; + disable-wp; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +/* ULPI SMSC USB3320 */ +&usb0 { + status = "okay"; +}; + +&watchdog0 { + status = "okay"; +}; From 9243d4d3908d65fece5153697bda1030c405d094 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 18 Jan 2018 16:34:51 +0100 Subject: [PATCH 10/22] arm64: zynqmp: Add support for Xilinx zcu106-revA Xilinx zcu106 is a customer board. It is reusing some parts from zcu102. Signed-off-by: Michal Simek Reviewed-by: Rob Herring --- .../devicetree/bindings/arm/xilinx.txt | 3 + arch/arm64/boot/dts/xilinx/Makefile | 1 + .../boot/dts/xilinx/zynqmp-zcu106-revA.dts | 522 ++++++++++++++++++ 3 files changed, 526 insertions(+) create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts diff --git a/Documentation/devicetree/bindings/arm/xilinx.txt b/Documentation/devicetree/bindings/arm/xilinx.txt index a9ce08a68711..8503fabf90ee 100644 --- a/Documentation/devicetree/bindings/arm/xilinx.txt +++ b/Documentation/devicetree/bindings/arm/xilinx.txt @@ -29,3 +29,6 @@ Additional compatible strings: - Xilinx evaluation board zcu104 "xlnx,zynqmp-zcu104-revA", "xlnx,zynqmp-zcu104" + +- Xilinx evaluation board zcu106 + "xlnx,zynqmp-zcu106-revA", "xlnx,zynqmp-zcu106" diff --git a/arch/arm64/boot/dts/xilinx/Makefile b/arch/arm64/boot/dts/xilinx/Makefile index 1c039e59c7c3..922c5da39600 100644 --- a/arch/arm64/boot/dts/xilinx/Makefile +++ b/arch/arm64/boot/dts/xilinx/Makefile @@ -5,3 +5,4 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-revA.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-revB.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-rev1.0.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu104-revA.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu106-revA.dtb diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts new file mode 100644 index 000000000000..668f7f26716a --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts @@ -0,0 +1,522 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP ZCU106 + * + * (C) Copyright 2016, Xilinx, Inc. + * + * Michal Simek + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk.dtsi" +#include +#include + +/ { + model = "ZynqMP ZCU106 RevA"; + compatible = "xlnx,zynqmp-zcu106-revA", "xlnx,zynqmp-zcu106", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem3; + i2c0 = &i2c0; + i2c1 = &i2c1; + mmc0 = &sdhci1; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &dcc; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + sw19 { + label = "sw19"; + gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; + linux,code = ; + gpio-key,wakeup; + autorepeat; + }; + }; + + leds { + compatible = "gpio-leds"; + heartbeat_led { + label = "heartbeat"; + gpios = <&gpio 23 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&can1 { + status = "okay"; +}; + +&dcc { + status = "okay"; +}; + +/* fpd_dma clk 667MHz, lpd_dma 500MHz */ +&fpd_dma_chan1 { + status = "okay"; +}; + +&fpd_dma_chan2 { + status = "okay"; +}; + +&fpd_dma_chan3 { + status = "okay"; +}; + +&fpd_dma_chan4 { + status = "okay"; +}; + +&fpd_dma_chan5 { + status = "okay"; +}; + +&fpd_dma_chan6 { + status = "okay"; +}; + +&fpd_dma_chan7 { + status = "okay"; +}; + +&fpd_dma_chan8 { + status = "okay"; +}; + +&gem3 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + phy0: phy@c { + reg = <0xc>; + ti,rx-internal-delay = <0x8>; + ti,tx-internal-delay = <0xa>; + ti,fifo-depth = <0x1>; + }; +}; + +&gpio { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + tca6416_u97: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; /* interrupt not connected */ + #gpio-cells = <2>; + /* + * IRQ not connected + * Lines: + * 0 - SFP_SI5328_INT_ALM + * 1 - HDMI_SI5328_INT_ALM + * 5 - IIC_MUX_RESET_B + * 6 - GEM3_EXP_RESET_B + * 10 - FMC_HPC0_PRSNT_M2C_B + * 11 - FMC_HPC1_PRSNT_M2C_B + * 2-4, 7, 12-17 - not connected + */ + }; + + tca6416_u61: gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + /* + * IRQ not connected + * Lines: + * 0 - VCCPSPLL_EN + * 1 - MGTRAVCC_EN + * 2 - MGTRAVTT_EN + * 3 - VCCPSDDRPLL_EN + * 4 - MIO26_PMU_INPUT_LS + * 5 - PL_PMBUS_ALERT + * 6 - PS_PMBUS_ALERT + * 7 - MAXIM_PMBUS_ALERT + * 10 - PL_DDR4_VTERM_EN + * 11 - PL_DDR4_VPP_2V5_EN + * 12 - PS_DIMM_VDDQ_TO_PSVCCO_ON + * 13 - PS_DIMM_SUSPEND_EN + * 14 - PS_DDR4_VTERM_EN + * 15 - PS_DDR4_VPP_2V5_EN + * 16 - 17 - not connected + */ + }; + + i2c-mux@75 { /* u60 */ + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x75>; + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* PS_PMBUS */ + ina226@40 { /* u76 */ + compatible = "ti,ina226"; + reg = <0x40>; + shunt-resistor = <5000>; + }; + ina226@41 { /* u77 */ + compatible = "ti,ina226"; + reg = <0x41>; + shunt-resistor = <5000>; + }; + ina226@42 { /* u78 */ + compatible = "ti,ina226"; + reg = <0x42>; + shunt-resistor = <5000>; + }; + ina226@43 { /* u87 */ + compatible = "ti,ina226"; + reg = <0x43>; + shunt-resistor = <5000>; + }; + ina226@44 { /* u85 */ + compatible = "ti,ina226"; + reg = <0x44>; + shunt-resistor = <5000>; + }; + ina226@45 { /* u86 */ + compatible = "ti,ina226"; + reg = <0x45>; + shunt-resistor = <5000>; + }; + ina226@46 { /* u93 */ + compatible = "ti,ina226"; + reg = <0x46>; + shunt-resistor = <5000>; + }; + ina226@47 { /* u88 */ + compatible = "ti,ina226"; + reg = <0x47>; + shunt-resistor = <5000>; + }; + ina226@4a { /* u15 */ + compatible = "ti,ina226"; + reg = <0x4a>; + shunt-resistor = <5000>; + }; + ina226@4b { /* u92 */ + compatible = "ti,ina226"; + reg = <0x4b>; + shunt-resistor = <5000>; + }; + }; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* PL_PMBUS */ + ina226@40 { /* u79 */ + compatible = "ti,ina226"; + reg = <0x40>; + shunt-resistor = <2000>; + }; + ina226@41 { /* u81 */ + compatible = "ti,ina226"; + reg = <0x41>; + shunt-resistor = <5000>; + }; + ina226@42 { /* u80 */ + compatible = "ti,ina226"; + reg = <0x42>; + shunt-resistor = <5000>; + }; + ina226@43 { /* u84 */ + compatible = "ti,ina226"; + reg = <0x43>; + shunt-resistor = <5000>; + }; + ina226@44 { /* u16 */ + compatible = "ti,ina226"; + reg = <0x44>; + shunt-resistor = <5000>; + }; + ina226@45 { /* u65 */ + compatible = "ti,ina226"; + reg = <0x45>; + shunt-resistor = <5000>; + }; + ina226@46 { /* u74 */ + compatible = "ti,ina226"; + reg = <0x46>; + shunt-resistor = <5000>; + }; + ina226@47 { /* u75 */ + compatible = "ti,ina226"; + reg = <0x47>; + shunt-resistor = <5000>; + }; + }; + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + /* MAXIM_PMBUS - 00 */ + max15301@a { /* u46 */ + compatible = "maxim,max15301"; + reg = <0xa>; + }; + max15303@b { /* u4 */ + compatible = "maxim,max15303"; + reg = <0xb>; + }; + max15303@10 { /* u13 */ + compatible = "maxim,max15303"; + reg = <0x10>; + }; + max15301@13 { /* u47 */ + compatible = "maxim,max15301"; + reg = <0x13>; + }; + max15303@14 { /* u7 */ + compatible = "maxim,max15303"; + reg = <0x14>; + }; + max15303@15 { /* u6 */ + compatible = "maxim,max15303"; + reg = <0x15>; + }; + max15303@16 { /* u10 */ + compatible = "maxim,max15303"; + reg = <0x16>; + }; + max15303@17 { /* u9 */ + compatible = "maxim,max15303"; + reg = <0x17>; + }; + max15301@18 { /* u63 */ + compatible = "maxim,max15301"; + reg = <0x18>; + }; + max15303@1a { /* u49 */ + compatible = "maxim,max15303"; + reg = <0x1a>; + }; + max15303@1b { /* u8 */ + compatible = "maxim,max15303"; + reg = <0x1b>; + }; + max15303@1d { /* u18 */ + compatible = "maxim,max15303"; + reg = <0x1d>; + }; + + max20751@72 { /* u95 */ + compatible = "maxim,max20751"; + reg = <0x72>; + }; + max20751@73 { /* u96 */ + compatible = "maxim,max20751"; + reg = <0x73>; + }; + }; + /* Bus 3 is not connected */ + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + /* PL i2c via PCA9306 - u45 */ + i2c-mux@74 { /* u34 */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* + * IIC_EEPROM 1kB memory which uses 256B blocks + * where every block has different address. + * 0 - 256B address 0x54 + * 256B - 512B address 0x55 + * 512B - 768B address 0x56 + * 768B - 1024B address 0x57 + */ + eeprom: eeprom@54 { /* u23 */ + compatible = "atmel,24c08"; + reg = <0x54>; + }; + }; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + si5341: clock-generator@36 { /* SI5341 - u69 */ + reg = <0x36>; + }; + + }; + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + si570_1: clock-generator@5d { /* USER SI570 - u42 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; + temperature-stability = <50>; + factory-fout = <300000000>; + clock-frequency = <300000000>; + }; + }; + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + si570_2: clock-generator@5d { /* USER MGT SI570 - u56 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; + temperature-stability = <50>; /* copy from zc702 */ + factory-fout = <156250000>; + clock-frequency = <148500000>; + }; + }; + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + si5328: clock-generator@69 {/* SI5328 - u20 */ + reg = <0x69>; + }; + }; + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; /* FAN controller */ + temp@4c {/* lm96163 - u128 */ + compatible = "national,lm96163"; + reg = <0x4c>; + }; + }; + /* 6 - 7 unconnected */ + }; + + i2c-mux@75 { + compatible = "nxp,pca9548"; /* u135 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <0x75>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* HPC0_IIC */ + }; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* HPC1_IIC */ + }; + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + /* SYSMON */ + }; + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + /* DDR4 SODIMM */ + }; + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + /* SEP 3 */ + }; + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + /* SEP 2 */ + }; + i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + /* SEP 1 */ + }; + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + /* SEP 0 */ + }; + }; +}; + +&rtc { + status = "okay"; +}; + +&sata { + status = "okay"; + /* SATA OOB timing settings */ + ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; +}; + +/* SD1 with level shifter */ +&sdhci1 { + status = "okay"; + no-1-8-v; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +/* ULPI SMSC USB3320 */ +&usb0 { + status = "okay"; +}; + +&watchdog0 { + status = "okay"; +}; From b8aee0229d1e678253e0681b7ed518aa810ad027 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 19 Jan 2018 13:03:56 +0100 Subject: [PATCH 11/22] arm64: zynqmp: Add support for Xilinx zcu111-revA Xilinx zcu111 is a customer board. It is reusing some parts from zcu102. Signed-off-by: Michal Simek Reviewed-by: Rob Herring --- .../devicetree/bindings/arm/xilinx.txt | 3 + arch/arm64/boot/dts/xilinx/Makefile | 1 + .../boot/dts/xilinx/zynqmp-zcu111-revA.dts | 444 ++++++++++++++++++ 3 files changed, 448 insertions(+) create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts diff --git a/Documentation/devicetree/bindings/arm/xilinx.txt b/Documentation/devicetree/bindings/arm/xilinx.txt index 8503fabf90ee..c2bc75774010 100644 --- a/Documentation/devicetree/bindings/arm/xilinx.txt +++ b/Documentation/devicetree/bindings/arm/xilinx.txt @@ -32,3 +32,6 @@ Additional compatible strings: - Xilinx evaluation board zcu106 "xlnx,zynqmp-zcu106-revA", "xlnx,zynqmp-zcu106" + +- Xilinx evaluation board zcu111 + "xlnx,zynqmp-zcu111-revA", "xlnx,zynqmp-zcu111" diff --git a/arch/arm64/boot/dts/xilinx/Makefile b/arch/arm64/boot/dts/xilinx/Makefile index 922c5da39600..d15c9dc1d8f2 100644 --- a/arch/arm64/boot/dts/xilinx/Makefile +++ b/arch/arm64/boot/dts/xilinx/Makefile @@ -6,3 +6,4 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-revB.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-rev1.0.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu104-revA.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu106-revA.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu111-revA.dtb diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts new file mode 100644 index 000000000000..9a9dd6a0142b --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts @@ -0,0 +1,444 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP ZCU111 + * + * (C) Copyright 2017 - 2018, Xilinx, Inc. + * + * Michal Simek + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk.dtsi" +#include +#include + +/ { + model = "ZynqMP ZCU111 RevA"; + compatible = "xlnx,zynqmp-zcu111-revA", "xlnx,zynqmp-zcu111", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem3; + i2c0 = &i2c0; + i2c1 = &i2c1; + mmc0 = &sdhci1; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &dcc; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; + /* Another 4GB connected to PL */ + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + sw19 { + label = "sw19"; + gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; + linux,code = ; + gpio-key,wakeup; + autorepeat; + }; + }; + + leds { + compatible = "gpio-leds"; + heartbeat_led { + label = "heartbeat"; + gpios = <&gpio 23 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&dcc { + status = "okay"; +}; + +&fpd_dma_chan1 { + status = "okay"; +}; + +&fpd_dma_chan2 { + status = "okay"; +}; + +&fpd_dma_chan3 { + status = "okay"; +}; + +&fpd_dma_chan4 { + status = "okay"; +}; + +&fpd_dma_chan5 { + status = "okay"; +}; + +&fpd_dma_chan6 { + status = "okay"; +}; + +&fpd_dma_chan7 { + status = "okay"; +}; + +&fpd_dma_chan8 { + status = "okay"; +}; + +&gem3 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + phy0: phy@c { + reg = <0xc>; + ti,rx-internal-delay = <0x8>; + ti,tx-internal-delay = <0xa>; + ti,fifo-depth = <0x1>; + }; +}; + +&gpio { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + tca6416_u22: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; /* interrupt not connected */ + #gpio-cells = <2>; + /* + * IRQ not connected + * Lines: + * 0 - MAX6643_OT_B + * 1 - MAX6643_FANFAIL_B + * 2 - MIO26_PMU_INPUT_LS + * 4 - SFP_SI5382_INT_ALM + * 5 - IIC_MUX_RESET_B + * 6 - GEM3_EXP_RESET_B + * 10 - FMCP_HSPC_PRSNT_M2C_B + * 11 - CLK_SPI_MUX_SEL0 + * 12 - CLK_SPI_MUX_SEL1 + * 16 - IRPS5401_ALERT_B + * 17 - INA226_PMBUS_ALERT + * 3, 7, 13-15 - not connected + */ + }; + + i2c-mux@75 { /* u23 */ + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x75>; + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* PS_PMBUS */ + /* PMBUS_ALERT done via pca9544 */ + ina226@40 { /* u67 */ + compatible = "ti,ina226"; + reg = <0x40>; + shunt-resistor = <2000>; + }; + ina226@41 { /* u59 */ + compatible = "ti,ina226"; + reg = <0x41>; + shunt-resistor = <5000>; + }; + ina226@42 { /* u61 */ + compatible = "ti,ina226"; + reg = <0x42>; + shunt-resistor = <5000>; + }; + ina226@43 { /* u60 */ + compatible = "ti,ina226"; + reg = <0x43>; + shunt-resistor = <5000>; + }; + ina226@45 { /* u64 */ + compatible = "ti,ina226"; + reg = <0x45>; + shunt-resistor = <5000>; + }; + ina226@46 { /* u69 */ + compatible = "ti,ina226"; + reg = <0x46>; + shunt-resistor = <2000>; + }; + ina226@47 { /* u66 */ + compatible = "ti,ina226"; + reg = <0x47>; + shunt-resistor = <5000>; + }; + ina226@48 { /* u65 */ + compatible = "ti,ina226"; + reg = <0x48>; + shunt-resistor = <5000>; + }; + ina226@49 { /* u63 */ + compatible = "ti,ina226"; + reg = <0x49>; + shunt-resistor = <5000>; + }; + ina226@4a { /* u3 */ + compatible = "ti,ina226"; + reg = <0x4a>; + shunt-resistor = <5000>; + }; + ina226@4b { /* u71 */ + compatible = "ti,ina226"; + reg = <0x4b>; + shunt-resistor = <5000>; + }; + ina226@4c { /* u77 */ + compatible = "ti,ina226"; + reg = <0x4c>; + shunt-resistor = <5000>; + }; + ina226@4d { /* u73 */ + compatible = "ti,ina226"; + reg = <0x4d>; + shunt-resistor = <5000>; + }; + ina226@4e { /* u79 */ + compatible = "ti,ina226"; + reg = <0x4e>; + shunt-resistor = <5000>; + }; + }; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* NC */ + }; + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + irps5401_43: irps54012@43 { /* IRPS5401 - u53 check these */ + reg = <0x43>; + }; + irps5401_44: irps54012@44 { /* IRPS5401 - u55 */ + reg = <0x44>; + }; + irps5401_45: irps54012@45 { /* IRPS5401 - u57 */ + reg = <0x45>; + }; + /* u68 IR38064 +0 */ + /* u70 IR38060 +1 */ + /* u74 IR38060 +2 */ + /* u75 IR38060 +6 */ + /* J19 header too */ + + }; + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + /* SYSMON */ + }; + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + i2c-mux@74 { /* u26 */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* + * IIC_EEPROM 1kB memory which uses 256B blocks + * where every block has different address. + * 0 - 256B address 0x54 + * 256B - 512B address 0x55 + * 512B - 768B address 0x56 + * 768B - 1024B address 0x57 + */ + eeprom: eeprom@54 { /* u88 */ + compatible = "atmel,24c08"; + reg = <0x54>; + }; + }; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + si5341: clock-generator@36 { /* SI5341 - u46 */ + reg = <0x36>; + }; + + }; + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + si570_1: clock-generator@5d { /* USER SI570 - u47 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; + temperature-stability = <50>; + factory-fout = <300000000>; + clock-frequency = <300000000>; + }; + }; + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + si570_2: clock-generator@5d { /* USER MGT SI570 - u49 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; + temperature-stability = <50>; + factory-fout = <156250000>; + clock-frequency = <148500000>; + }; + }; + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + si5328: clock-generator@69 { /* SI5328 - u48 */ + reg = <0x69>; + }; + }; + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + sc18is603@2f { /* sc18is602 - u93 */ + compatible = "nxp,sc18is603"; + reg = <0x2f>; + /* 4 gpios for CS not handled by driver */ + /* + * USB2ANY cable or + * LMK04208 - u90 or + * LMX2594 - u102 or + * LMX2594 - u103 or + * LMX2594 - u104 + */ + }; + }; + i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + /* FMC connector */ + }; + /* 7 NC */ + }; + + i2c-mux@75 { + compatible = "nxp,pca9548"; /* u27 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <0x75>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* FMCP_HSPC_IIC */ + }; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* NC */ + }; + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + /* SYSMON */ + }; + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + /* DDR4 SODIMM */ + }; + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + /* SFP3 */ + }; + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + /* SFP2 */ + }; + i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + /* SFP1 */ + }; + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + /* SFP0 */ + }; + }; +}; + +&rtc { + status = "okay"; +}; + +&sata { + status = "okay"; + /* SATA OOB timing settings */ + ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; +}; + +/* SD1 with level shifter */ +&sdhci1 { + status = "okay"; + no-1-8-v; +}; + +&uart0 { + status = "okay"; +}; + +/* ULPI SMSC USB3320 */ +&usb0 { + status = "okay"; +}; From d665c7435f18871e77395e4575c0f7209c5cdc10 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 19 Jan 2018 13:11:01 +0100 Subject: [PATCH 12/22] arm64: zynqmp: Add support for Xilinx zc12XX boards These 3 boards requires minimal support to get Linux up and running. Signed-off-by: Michal Simek Reviewed-by: Rob Herring --- .../devicetree/bindings/arm/xilinx.txt | 9 ++++ arch/arm64/boot/dts/xilinx/Makefile | 3 ++ .../boot/dts/xilinx/zynqmp-zc1232-revA.dts | 54 +++++++++++++++++++ .../boot/dts/xilinx/zynqmp-zc1254-revA.dts | 42 +++++++++++++++ .../boot/dts/xilinx/zynqmp-zc1275-revA.dts | 42 +++++++++++++++ 5 files changed, 150 insertions(+) create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts diff --git a/Documentation/devicetree/bindings/arm/xilinx.txt b/Documentation/devicetree/bindings/arm/xilinx.txt index c2bc75774010..aceccf2bf43b 100644 --- a/Documentation/devicetree/bindings/arm/xilinx.txt +++ b/Documentation/devicetree/bindings/arm/xilinx.txt @@ -19,6 +19,15 @@ Required root node properties: Additional compatible strings: +- Xilinx internal board zc1232 + "xlnx,zynqmp-zc1232-revA", "xlnx,zynqmp-zc1232" + +- Xilinx internal board zc1254 + "xlnx,zynqmp-zc1254-revA", "xlnx,zynqmp-zc1254" + +- Xilinx internal board zc1275 + "xlnx,zynqmp-zc1275-revA", "xlnx,zynqmp-zc1275" + - Xilinx 96boards compatible board zcu100 "xlnx,zynqmp-zcu100-revC", "xlnx,zynqmp-zcu100" diff --git a/arch/arm64/boot/dts/xilinx/Makefile b/arch/arm64/boot/dts/xilinx/Makefile index d15c9dc1d8f2..bdda451afaad 100644 --- a/arch/arm64/boot/dts/xilinx/Makefile +++ b/arch/arm64/boot/dts/xilinx/Makefile @@ -1,5 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-ep108.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1232-revA.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1254-revA.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1275-revA.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu100-revC.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-revA.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-revB.dtb diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts new file mode 100644 index 000000000000..0f7b4cf6078e --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP ZC1232 + * + * (C) Copyright 2017 - 2018, Xilinx, Inc. + * + * Michal Simek + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk.dtsi" + +/ { + model = "ZynqMP ZC1232 RevA"; + compatible = "xlnx,zynqmp-zc1232-revA", "xlnx,zynqmp-zc1232", "xlnx,zynqmp"; + + aliases { + serial0 = &uart0; + serial1 = &dcc; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; +}; + +&dcc { + status = "okay"; +}; + +&sata { + status = "okay"; + /* SATA OOB timing settings */ + ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts new file mode 100644 index 000000000000..9092828f92ec --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP ZC1254 + * + * (C) Copyright 2015 - 2018, Xilinx, Inc. + * + * Michal Simek + * Siva Durga Prasad Paladugu + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk.dtsi" + +/ { + model = "ZynqMP ZC1254 RevA"; + compatible = "xlnx,zynqmp-zc1254-revA", "xlnx,zynqmp-zc1254", "xlnx,zynqmp"; + + aliases { + serial0 = &uart0; + serial1 = &dcc; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; +}; + +&dcc { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts new file mode 100644 index 000000000000..4f404c580eec --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP ZC1275 + * + * (C) Copyright 2017 - 2018, Xilinx, Inc. + * + * Michal Simek + * Siva Durga Prasad Paladugu + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk.dtsi" + +/ { + model = "ZynqMP ZC1275 RevA"; + compatible = "xlnx,zynqmp-zc1275-revA", "xlnx,zynqmp-zc1275", "xlnx,zynqmp"; + + aliases { + serial0 = &uart0; + serial1 = &dcc; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; +}; + +&dcc { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; From e2fc49e19898538184191cbf2bc15f240081efad Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 19 Jan 2018 13:15:44 +0100 Subject: [PATCH 13/22] arm64: zynqmp: Add support for Xilinx zc1751 Xilinx zc1751 boards is used for silicon validation. Board can be extended with 5 FMCs/DCs cards to connect various IPs. Describe all these combinations. Signed-off-by: Michal Simek Reviewed-by: Rob Herring --- .../devicetree/bindings/arm/xilinx.txt | 3 + arch/arm64/boot/dts/xilinx/Makefile | 5 + .../dts/xilinx/zynqmp-zc1751-xm015-dc1.dts | 131 +++++++++++++ .../dts/xilinx/zynqmp-zc1751-xm016-dc2.dts | 168 +++++++++++++++++ .../dts/xilinx/zynqmp-zc1751-xm017-dc3.dts | 150 +++++++++++++++ .../dts/xilinx/zynqmp-zc1751-xm018-dc4.dts | 178 ++++++++++++++++++ .../dts/xilinx/zynqmp-zc1751-xm019-dc5.dts | 125 ++++++++++++ 7 files changed, 760 insertions(+) create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts diff --git a/Documentation/devicetree/bindings/arm/xilinx.txt b/Documentation/devicetree/bindings/arm/xilinx.txt index aceccf2bf43b..0cf6fb61631d 100644 --- a/Documentation/devicetree/bindings/arm/xilinx.txt +++ b/Documentation/devicetree/bindings/arm/xilinx.txt @@ -28,6 +28,9 @@ Additional compatible strings: - Xilinx internal board zc1275 "xlnx,zynqmp-zc1275-revA", "xlnx,zynqmp-zc1275" +- Xilinx internal board zc1751 + "xlnx,zynqmp-zc1751" + - Xilinx 96boards compatible board zcu100 "xlnx,zynqmp-zcu100-revC", "xlnx,zynqmp-zcu100" diff --git a/arch/arm64/boot/dts/xilinx/Makefile b/arch/arm64/boot/dts/xilinx/Makefile index bdda451afaad..c2a0c00272e2 100644 --- a/arch/arm64/boot/dts/xilinx/Makefile +++ b/arch/arm64/boot/dts/xilinx/Makefile @@ -3,6 +3,11 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-ep108.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1232-revA.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1254-revA.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1275-revA.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm015-dc1.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm016-dc2.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm017-dc3.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm018-dc4.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm019-dc5.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu100-revC.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-revA.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-revB.dtb diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts new file mode 100644 index 000000000000..9a3e39d1294f --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts @@ -0,0 +1,131 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP zc1751-xm015-dc1 + * + * (C) Copyright 2015 - 2018, Xilinx, Inc. + * + * Michal Simek + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk.dtsi" +#include + +/ { + model = "ZynqMP zc1751-xm015-dc1 RevA"; + compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem3; + i2c0 = &i2c1; + mmc0 = &sdhci0; + mmc1 = &sdhci1; + rtc0 = &rtc; + serial0 = &uart0; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; + }; +}; + +&fpd_dma_chan1 { + status = "okay"; +}; + +&fpd_dma_chan2 { + status = "okay"; +}; + +&fpd_dma_chan3 { + status = "okay"; +}; + +&fpd_dma_chan4 { + status = "okay"; +}; + +&fpd_dma_chan5 { + status = "okay"; +}; + +&fpd_dma_chan6 { + status = "okay"; +}; + +&fpd_dma_chan7 { + status = "okay"; +}; + +&fpd_dma_chan8 { + status = "okay"; +}; + +&gem3 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + phy0: phy@0 { + reg = <0>; + }; +}; + +&gpio { + status = "okay"; +}; + + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + eeprom: eeprom@55 { + compatible = "atmel,24c64"; /* 24AA64 */ + reg = <0x55>; + }; +}; + +&rtc { + status = "okay"; +}; + +&sata { + status = "okay"; + /* SATA phy OOB timing settings */ + ceva,p0-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>; + ceva,p0-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>; + ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + ceva,p1-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>; + ceva,p1-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>; + ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; +}; + +/* eMMC */ +&sdhci0 { + status = "okay"; + bus-width = <8>; +}; + +/* SD1 with level shifter */ +&sdhci1 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +/* ULPI SMSC USB3320 */ +&usb0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts new file mode 100644 index 000000000000..11cc67184fa9 --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts @@ -0,0 +1,168 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP zc1751-xm016-dc2 + * + * (C) Copyright 2015 - 2018, Xilinx, Inc. + * + * Michal Simek + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk.dtsi" +#include + +/ { + model = "ZynqMP zc1751-xm016-dc2 RevA"; + compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp"; + + aliases { + can0 = &can0; + can1 = &can1; + ethernet0 = &gem2; + i2c0 = &i2c0; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &uart1; + spi0 = &spi0; + spi1 = &spi1; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; + }; +}; + +&can0 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&fpd_dma_chan1 { + status = "okay"; +}; + +&fpd_dma_chan2 { + status = "okay"; +}; + +&fpd_dma_chan3 { + status = "okay"; +}; + +&fpd_dma_chan4 { + status = "okay"; +}; + +&fpd_dma_chan5 { + status = "okay"; +}; + +&fpd_dma_chan6 { + status = "okay"; +}; + +&fpd_dma_chan7 { + status = "okay"; +}; + +&fpd_dma_chan8 { + status = "okay"; +}; + +&gem2 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + phy0: phy@5 { + reg = <5>; + ti,rx-internal-delay = <0x8>; + ti,tx-internal-delay = <0xa>; + ti,fifo-depth = <0x1>; + }; +}; + +&gpio { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + tca6416_u26: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + /* IRQ not connected */ + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; +}; + +&rtc { + status = "okay"; +}; + +&spi0 { + status = "okay"; + num-cs = <1>; + + spi0_flash0: flash0@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "sst,sst25wf080", "jedec,spi-nor"; + spi-max-frequency = <50000000>; + reg = <0>; + + partition@0 { + label = "data"; + reg = <0x0 0x100000>; + }; + }; +}; + +&spi1 { + status = "okay"; + num-cs = <1>; + + spi1_flash0: flash0@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at45db041e", "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <20000000>; + reg = <0>; + + partition@0 { + label = "data"; + reg = <0x0 0x84000>; + }; + }; +}; + +/* ULPI SMSC USB3320 */ +&usb1 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts new file mode 100644 index 000000000000..7a49deeae647 --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts @@ -0,0 +1,150 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP zc1751-xm017-dc3 + * + * (C) Copyright 2016 - 2018, Xilinx, Inc. + * + * Michal Simek + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk.dtsi" + +/ { + model = "ZynqMP zc1751-xm017-dc3 RevA"; + compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem0; + i2c0 = &i2c0; + i2c1 = &i2c1; + mmc0 = &sdhci1; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; + }; +}; + +&fpd_dma_chan1 { + status = "okay"; +}; + +&fpd_dma_chan2 { + status = "okay"; +}; + +&fpd_dma_chan3 { + status = "okay"; +}; + +&fpd_dma_chan4 { + status = "okay"; +}; + +&fpd_dma_chan5 { + status = "okay"; +}; + +&fpd_dma_chan6 { + status = "okay"; +}; + +&fpd_dma_chan7 { + status = "okay"; +}; + +&fpd_dma_chan8 { + status = "okay"; +}; + +&gem0 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + phy0: phy@0 { /* VSC8211 */ + reg = <0>; + }; +}; + +&gpio { + status = "okay"; +}; + +/* just eeprom here */ +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + tca6416_u26: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + /* IRQ not connected */ + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; +}; + +/* eeprom24c02 and SE98A temp chip pca9306 */ +&i2c1 { + status = "okay"; + clock-frequency = <400000>; +}; + +&rtc { + status = "okay"; +}; + +&sata { + status = "okay"; + /* SATA phy OOB timing settings */ + ceva,p0-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>; + ceva,p0-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>; + ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + ceva,p1-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>; + ceva,p1-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>; + ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; +}; + +&sdhci1 { /* emmc with some settings */ + status = "okay"; +}; + +/* main */ +&uart0 { + status = "okay"; +}; + +/* DB9 */ +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; +}; + +/* ULPI SMSC USB3320 */ +&usb1 { + status = "okay"; + dr_mode = "host"; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts new file mode 100644 index 000000000000..54c7b4f1d1e4 --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts @@ -0,0 +1,178 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP zc1751-xm018-dc4 + * + * (C) Copyright 2015 - 2018, Xilinx, Inc. + * + * Michal Simek + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk.dtsi" + +/ { + model = "ZynqMP zc1751-xm018-dc4"; + compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem0; + ethernet1 = &gem1; + ethernet2 = &gem2; + ethernet3 = &gem3; + i2c0 = &i2c0; + i2c1 = &i2c1; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; + }; +}; + +&can0 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&fpd_dma_chan1 { + status = "okay"; +}; + +&fpd_dma_chan2 { + status = "okay"; +}; + +&fpd_dma_chan3 { + status = "okay"; +}; + +&fpd_dma_chan4 { + status = "okay"; +}; + +&fpd_dma_chan5 { + status = "okay"; +}; + +&fpd_dma_chan6 { + status = "okay"; +}; + +&fpd_dma_chan7 { + status = "okay"; +}; + +&fpd_dma_chan8 { + status = "okay"; +}; + +&lpd_dma_chan1 { + status = "okay"; +}; + +&lpd_dma_chan2 { + status = "okay"; +}; + +&lpd_dma_chan3 { + status = "okay"; +}; + +&lpd_dma_chan4 { + status = "okay"; +}; + +&lpd_dma_chan5 { + status = "okay"; +}; + +&lpd_dma_chan6 { + status = "okay"; +}; + +&lpd_dma_chan7 { + status = "okay"; +}; + +&lpd_dma_chan8 { + status = "okay"; +}; + +&gem0 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy0>; + ethernet_phy0: ethernet-phy@0 { /* Marvell 88e1512 */ + reg = <0>; + }; + ethernet_phy7: ethernet-phy@7 { /* Vitesse VSC8211 */ + reg = <7>; + }; + ethernet_phy3: ethernet-phy@3 { /* Realtek RTL8211DN */ + reg = <3>; + }; + ethernet_phy8: ethernet-phy@8 { /* Vitesse VSC8211 */ + reg = <8>; + }; +}; + +&gem1 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy7>; +}; + +&gem2 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy3>; +}; + +&gem3 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy8>; +}; + +&gpio { + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <400000>; + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&watchdog0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts new file mode 100644 index 000000000000..b8b5ff13818d --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts @@ -0,0 +1,125 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP zc1751-xm019-dc5 + * + * (C) Copyright 2015 - 2018, Xilinx, Inc. + * + * Siva Durga Prasad + * Michal Simek + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk.dtsi" +#include + +/ { + model = "ZynqMP zc1751-xm019-dc5 RevA"; + compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem1; + i2c0 = &i2c0; + i2c1 = &i2c1; + mmc0 = &sdhci0; + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; + }; +}; + +&fpd_dma_chan1 { + status = "okay"; +}; + +&fpd_dma_chan2 { + status = "okay"; +}; + +&fpd_dma_chan3 { + status = "okay"; +}; + +&fpd_dma_chan4 { + status = "okay"; +}; + +&fpd_dma_chan5 { + status = "okay"; +}; + +&fpd_dma_chan6 { + status = "okay"; +}; + +&fpd_dma_chan7 { + status = "okay"; +}; + +&fpd_dma_chan8 { + status = "okay"; +}; + +&gem1 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + phy0: phy@0 { + reg = <0>; + }; +}; + +&gpio { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&sdhci0 { + status = "okay"; + no-1-8-v; +}; + +&ttc0 { + status = "okay"; +}; + +&ttc1 { + status = "okay"; +}; + +&ttc2 { + status = "okay"; +}; + +&ttc3 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&watchdog0 { + status = "okay"; +}; From 16dbf086e93329667d92ef8e241e0e1b88a0b85a Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 6 Feb 2018 14:00:30 +0100 Subject: [PATCH 14/22] arm: zynq: Use i2c-mux instead of i2cswitch for pca9548 i2c muxes should described like this. Signed-off-by: Michal Simek --- arch/arm/boot/dts/zynq-zc702.dts | 2 +- arch/arm/boot/dts/zynq-zc706.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index 70a5de76b7db..ff3a7d22afba 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -112,7 +112,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0_default>; - i2cswitch@74 { + i2c-mux@74 { compatible = "nxp,pca9548"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts index cdc326ec3335..1825f5722ab9 100644 --- a/arch/arm/boot/dts/zynq-zc706.dts +++ b/arch/arm/boot/dts/zynq-zc706.dts @@ -68,7 +68,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0_default>; - i2cswitch@74 { + i2c-mux@74 { compatible = "nxp,pca9548"; #address-cells = <1>; #size-cells = <0>; From 32cda44dd60db0f3d9000041e034de107a6a99a3 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Wed, 1 Nov 2017 13:16:17 +0100 Subject: [PATCH 15/22] arm: dts: zynq: Use SPDX-License-Identifier Follow trend and use the SPDX License description. Signed-off-by: Michal Simek --- arch/arm/boot/dts/zynq-7000.dtsi | 12 ++---------- arch/arm/boot/dts/zynq-microzed.dts | 10 +--------- arch/arm/boot/dts/zynq-parallella.dts | 10 +--------- arch/arm/boot/dts/zynq-zc702.dts | 10 +--------- arch/arm/boot/dts/zynq-zc706.dts | 10 +--------- arch/arm/boot/dts/zynq-zed.dts | 10 +--------- arch/arm/boot/dts/zynq-zybo.dts | 10 +--------- 7 files changed, 8 insertions(+), 64 deletions(-) diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index 0f79fe1ccd9d..e22507e23303 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -1,14 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 /* - * Copyright (C) 2011 - 2014 Xilinx - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * Copyright (C) 2011 - 2014 Xilinx */ / { diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts index b9376a4904b4..e017cb67ffba 100644 --- a/arch/arm/boot/dts/zynq-microzed.dts +++ b/arch/arm/boot/dts/zynq-microzed.dts @@ -1,15 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright (C) 2011 - 2014 Xilinx * Copyright (C) 2016 Jagan Teki - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ /dts-v1/; /include/ "zynq-7000.dtsi" diff --git a/arch/arm/boot/dts/zynq-parallella.dts b/arch/arm/boot/dts/zynq-parallella.dts index 0144acfa9793..c05f4b67d4c1 100644 --- a/arch/arm/boot/dts/zynq-parallella.dts +++ b/arch/arm/boot/dts/zynq-parallella.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright (c) 2014 SUSE LINUX Products GmbH * @@ -6,15 +7,6 @@ * Copyright (C) 2011 Xilinx * Copyright (C) 2012 National Instruments Corp. * Copyright (C) 2013 Xilinx - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ /dts-v1/; /include/ "zynq-7000.dtsi" diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index ff3a7d22afba..f2330b0cb63d 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -1,15 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright (C) 2011 - 2014 Xilinx * Copyright (C) 2012 National Instruments Corp. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ /dts-v1/; #include "zynq-7000.dtsi" diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts index 1825f5722ab9..3ad1260ff2a1 100644 --- a/arch/arm/boot/dts/zynq-zc706.dts +++ b/arch/arm/boot/dts/zynq-zc706.dts @@ -1,15 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright (C) 2011 - 2014 Xilinx * Copyright (C) 2012 National Instruments Corp. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ /dts-v1/; #include "zynq-7000.dtsi" diff --git a/arch/arm/boot/dts/zynq-zed.dts b/arch/arm/boot/dts/zynq-zed.dts index 5e44dc12fd60..53c6883ce1f6 100644 --- a/arch/arm/boot/dts/zynq-zed.dts +++ b/arch/arm/boot/dts/zynq-zed.dts @@ -1,15 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright (C) 2011 - 2014 Xilinx * Copyright (C) 2012 National Instruments Corp. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ /dts-v1/; #include "zynq-7000.dtsi" diff --git a/arch/arm/boot/dts/zynq-zybo.dts b/arch/arm/boot/dts/zynq-zybo.dts index e40cafc5ee5b..a6c00e7fa767 100644 --- a/arch/arm/boot/dts/zynq-zybo.dts +++ b/arch/arm/boot/dts/zynq-zybo.dts @@ -1,15 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright (C) 2011 - 2014 Xilinx * Copyright (C) 2012 National Instruments Corp. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ /dts-v1/; #include "zynq-7000.dtsi" From 7d3439f9cb8c8d31322f727d10e0d32d576b0c86 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Wed, 17 Jan 2018 15:21:38 +0100 Subject: [PATCH 16/22] arm: zynq: Add missing address node name in microzed board This patch is fixing issue reported by dtc: arch/arm/boot/dts/zynq-microzed.dtb: Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name Signed-off-by: Michal Simek --- arch/arm/boot/dts/zynq-microzed.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts index e017cb67ffba..aa4a0b6defb8 100644 --- a/arch/arm/boot/dts/zynq-microzed.dts +++ b/arch/arm/boot/dts/zynq-microzed.dts @@ -15,7 +15,7 @@ serial0 = &uart1; }; - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x40000000>; }; From c7cf9964bafdcd08480bd1d79fb0d624c12a0c78 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Wed, 17 Jan 2018 14:25:16 +0100 Subject: [PATCH 17/22] arm: zynq: Add Xilinx cc108 board The board contains 7z010 with 512MB memory, ethernet, qspi, uart, usbs and sd. But board is not supporting booting from sd card. Signed-off-by: Michal Simek Reviewed-by: Rob Herring --- .../devicetree/bindings/arm/xilinx.txt | 5 ++ arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/zynq-cc108.dts | 75 +++++++++++++++++++ 3 files changed, 81 insertions(+) create mode 100644 arch/arm/boot/dts/zynq-cc108.dts diff --git a/Documentation/devicetree/bindings/arm/xilinx.txt b/Documentation/devicetree/bindings/arm/xilinx.txt index 0cf6fb61631d..e8c02eaf6184 100644 --- a/Documentation/devicetree/bindings/arm/xilinx.txt +++ b/Documentation/devicetree/bindings/arm/xilinx.txt @@ -6,6 +6,11 @@ shall have the following properties. Required root node properties: - compatible = "xlnx,zynq-7000"; +Additional compatible strings: + +- Xilinx internal board cc108 + "xlnx,zynq-cc108" + --------------------------------------------------------------- Xilinx Zynq UltraScale+ MPSoC Platforms Device Tree Bindings diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index ade7a38543dc..c6810e84d4d7 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1062,6 +1062,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \ wm8750-apc8750.dtb \ wm8850-w70v2.dtb dtb-$(CONFIG_ARCH_ZYNQ) += \ + zynq-cc108.dtb \ zynq-microzed.dtb \ zynq-parallella.dtb \ zynq-zc702.dtb \ diff --git a/arch/arm/boot/dts/zynq-cc108.dts b/arch/arm/boot/dts/zynq-cc108.dts new file mode 100644 index 000000000000..1a0f631c1d8d --- /dev/null +++ b/arch/arm/boot/dts/zynq-cc108.dts @@ -0,0 +1,75 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Xilinx CC108 board DTS + * + * (C) Copyright 2007-2018 Xilinx, Inc. + * (C) Copyright 2007-2013 Michal Simek + * (C) Copyright 2007-2012 PetaLogix Qld Pty Ltd + * + * Michal SIMEK + */ +/dts-v1/; +/include/ "zynq-7000.dtsi" + +/ { + compatible = "xlnx,zynq-cc108", "xlnx,zynq-7000"; + model = "Xilinx Zynq"; + + aliases { + ethernet0 = &gem0; + serial0 = &uart0; + }; + + chosen { + bootargs = ""; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x20000000>; + }; + + usb_phy0: phy0 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; + + usb_phy1: phy1 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; +}; + +&gem0 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + + ethernet_phy: ethernet-phy@1 { + reg = <1>; + device_type = "ethernet-phy"; + }; +}; + +&sdhci1 { + status = "okay"; + broken-cd ; + wp-inverted ; +}; + +&uart0 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; + usb-phy = <&usb_phy0>; +}; + +&usb1 { + status = "okay"; + dr_mode = "host"; + usb-phy = <&usb_phy1>; +}; From eac38299d21ed7bf9c774c27aec653bf7067ccfd Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Wed, 17 Jan 2018 14:58:44 +0100 Subject: [PATCH 18/22] arm: zynq: Add support for Xilinx zc770 xm010 dc1 board zc770 is based board which is extended by FMC/DC cards for SoC validation. FMCs/DCs are supposed to cover all SoC configurations. FMC/DC contains ethernet port, can, i2c, sd, qspi, spi, uart and usb. Signed-off-by: Michal Simek Reviewed-by: Rob Herring --- .../devicetree/bindings/arm/xilinx.txt | 3 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/zynq-zc770-xm010.dts | 95 +++++++++++++++++++ 3 files changed, 99 insertions(+) create mode 100644 arch/arm/boot/dts/zynq-zc770-xm010.dts diff --git a/Documentation/devicetree/bindings/arm/xilinx.txt b/Documentation/devicetree/bindings/arm/xilinx.txt index e8c02eaf6184..3581f2d021a5 100644 --- a/Documentation/devicetree/bindings/arm/xilinx.txt +++ b/Documentation/devicetree/bindings/arm/xilinx.txt @@ -11,6 +11,9 @@ Additional compatible strings: - Xilinx internal board cc108 "xlnx,zynq-cc108" +- Xilinx internal board zc770 with different FMC cards + "xlnx,zynq-zc770-xm010" + --------------------------------------------------------------- Xilinx Zynq UltraScale+ MPSoC Platforms Device Tree Bindings diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index c6810e84d4d7..be9ffae2a1ec 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1067,6 +1067,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \ zynq-parallella.dtb \ zynq-zc702.dtb \ zynq-zc706.dtb \ + zynq-zc770-xm010.dtb \ zynq-zed.dtb \ zynq-zybo.dtb dtb-$(CONFIG_MACH_ARMADA_370) += \ diff --git a/arch/arm/boot/dts/zynq-zc770-xm010.dts b/arch/arm/boot/dts/zynq-zc770-xm010.dts new file mode 100644 index 000000000000..6884f1ad66b7 --- /dev/null +++ b/arch/arm/boot/dts/zynq-zc770-xm010.dts @@ -0,0 +1,95 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Xilinx ZC770 XM010 board DTS + * + * Copyright (C) 2013-2018 Xilinx, Inc. + */ +/dts-v1/; +#include "zynq-7000.dtsi" + +/ { + compatible = "xlnx,zynq-zc770-xm010", "xlnx,zynq-7000"; + model = "Xilinx Zynq"; + + aliases { + ethernet0 = &gem0; + i2c0 = &i2c0; + serial0 = &uart1; + spi1 = &spi1; + }; + + chosen { + bootargs = ""; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x40000000>; + }; + + usb_phy0: phy0 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; +}; + +&can0 { + status = "okay"; +}; + +&gem0 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + + ethernet_phy: ethernet-phy@7 { + reg = <7>; + device_type = "ethernet-phy"; + }; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + eeprom: eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + }; + +}; + +&sdhci0 { + status = "okay"; +}; + +&spi1 { + status = "okay"; + num-cs = <4>; + is-decoded-cs = <0>; + flash@0 { + compatible = "sst25wf080", "jedec,spi-nor"; + reg = <1>; + spi-max-frequency = <1000000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "data"; + reg = <0x0 0x100000>; + }; + }; + }; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; + usb-phy = <&usb_phy0>; +}; From 0d18af0a8f75f635651fb23817bd99318214448e Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Wed, 17 Jan 2018 15:07:46 +0100 Subject: [PATCH 19/22] arm: zynq: Add support for Xilinx zc770 xm011 dc2 board zc770 is based board which is extended by FMC/DC cards for SoC validation. FMCs/DCs are supposed to cover all SoC configurations. FMC/DC contains can, i2c, nand uart, spi and usb. Signed-off-by: Michal Simek Reviewed-by: Rob Herring --- .../devicetree/bindings/arm/xilinx.txt | 1 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/zynq-zc770-xm011.dts | 64 +++++++++++++++++++ 3 files changed, 66 insertions(+) create mode 100644 arch/arm/boot/dts/zynq-zc770-xm011.dts diff --git a/Documentation/devicetree/bindings/arm/xilinx.txt b/Documentation/devicetree/bindings/arm/xilinx.txt index 3581f2d021a5..c3d08632ce07 100644 --- a/Documentation/devicetree/bindings/arm/xilinx.txt +++ b/Documentation/devicetree/bindings/arm/xilinx.txt @@ -13,6 +13,7 @@ Additional compatible strings: - Xilinx internal board zc770 with different FMC cards "xlnx,zynq-zc770-xm010" + "xlnx,zynq-zc770-xm011" --------------------------------------------------------------- diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index be9ffae2a1ec..801a46a88e93 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1068,6 +1068,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \ zynq-zc702.dtb \ zynq-zc706.dtb \ zynq-zc770-xm010.dtb \ + zynq-zc770-xm011.dtb \ zynq-zed.dtb \ zynq-zybo.dtb dtb-$(CONFIG_MACH_ARMADA_370) += \ diff --git a/arch/arm/boot/dts/zynq-zc770-xm011.dts b/arch/arm/boot/dts/zynq-zc770-xm011.dts new file mode 100644 index 000000000000..b78883cee96a --- /dev/null +++ b/arch/arm/boot/dts/zynq-zc770-xm011.dts @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Xilinx ZC770 XM013 board DTS + * + * Copyright (C) 2013-2018 Xilinx, Inc. + */ +/dts-v1/; +#include "zynq-7000.dtsi" + +/ { + compatible = "xlnx,zynq-zc770-xm011", "xlnx,zynq-7000"; + model = "Xilinx Zynq"; + + aliases { + i2c0 = &i2c1; + serial0 = &uart1; + spi0 = &spi0; + }; + + chosen { + bootargs = ""; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x40000000>; + }; + + usb_phy1: phy1 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; +}; + +&can0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + eeprom: eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + }; +}; + +&spi0 { + status = "okay"; + num-cs = <4>; + is-decoded-cs = <0>; +}; + +&uart1 { + status = "okay"; +}; + +&usb1 { + status = "okay"; + dr_mode = "host"; + usb-phy = <&usb_phy1>; +}; From 0d032bb92f8d3843bcc690fd2f5c6534bf2deb1e Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Wed, 17 Jan 2018 15:12:16 +0100 Subject: [PATCH 20/22] arm: zynq: Add support for Xilinx zc770 xm012 dc3 board zc770 is based board which is extended by FMC/DC cards for SoC validation. FMCs/DCs are supposed to cover all SoC configurations. FMC/DC contains can, 2x i2c, nor flash, spi and uart. Signed-off-by: Michal Simek Reviewed-by: Rob Herring --- .../devicetree/bindings/arm/xilinx.txt | 1 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/zynq-zc770-xm012.dts | 64 +++++++++++++++++++ 3 files changed, 66 insertions(+) create mode 100644 arch/arm/boot/dts/zynq-zc770-xm012.dts diff --git a/Documentation/devicetree/bindings/arm/xilinx.txt b/Documentation/devicetree/bindings/arm/xilinx.txt index c3d08632ce07..d1ce0d5c7281 100644 --- a/Documentation/devicetree/bindings/arm/xilinx.txt +++ b/Documentation/devicetree/bindings/arm/xilinx.txt @@ -14,6 +14,7 @@ Additional compatible strings: - Xilinx internal board zc770 with different FMC cards "xlnx,zynq-zc770-xm010" "xlnx,zynq-zc770-xm011" + "xlnx,zynq-zc770-xm012" --------------------------------------------------------------- diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 801a46a88e93..2c74b935ad1c 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1069,6 +1069,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \ zynq-zc706.dtb \ zynq-zc770-xm010.dtb \ zynq-zc770-xm011.dtb \ + zynq-zc770-xm012.dtb \ zynq-zed.dtb \ zynq-zybo.dtb dtb-$(CONFIG_MACH_ARMADA_370) += \ diff --git a/arch/arm/boot/dts/zynq-zc770-xm012.dts b/arch/arm/boot/dts/zynq-zc770-xm012.dts new file mode 100644 index 000000000000..c3169d63600d --- /dev/null +++ b/arch/arm/boot/dts/zynq-zc770-xm012.dts @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Xilinx ZC770 XM012 board DTS + * + * Copyright (C) 2013-2018 Xilinx, Inc. + */ +/dts-v1/; +#include "zynq-7000.dtsi" + +/ { + compatible = "xlnx,zynq-zc770-xm012", "xlnx,zynq-7000"; + model = "Xilinx Zynq"; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + serial0 = &uart1; + spi0 = &spi1; + }; + + chosen { + bootargs = ""; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x40000000>; + }; +}; + +&can1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + eeprom0: eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + eeprom1: eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + }; +}; + +&spi1 { + status = "okay"; + num-cs = <4>; + is-decoded-cs = <0>; +}; + +&uart1 { + status = "okay"; +}; From 73793093ab17121620d7d409ab944060364a4ed3 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Wed, 17 Jan 2018 15:15:42 +0100 Subject: [PATCH 21/22] arm: zynq: Add support for Xilinx zc770 xm013 dc4 board zc770 is based board which is extended by FMC/DC cards for SoC validation. FMCs/DCs are supposed to cover all SoC configurations. FMC/DC contains can, ethernet, i2c, qspi, spi and uart. Signed-off-by: Michal Simek Reviewed-by: Rob Herring --- .../devicetree/bindings/arm/xilinx.txt | 1 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/zynq-zc770-xm013.dts | 78 +++++++++++++++++++ 3 files changed, 80 insertions(+) create mode 100644 arch/arm/boot/dts/zynq-zc770-xm013.dts diff --git a/Documentation/devicetree/bindings/arm/xilinx.txt b/Documentation/devicetree/bindings/arm/xilinx.txt index d1ce0d5c7281..06e07952d509 100644 --- a/Documentation/devicetree/bindings/arm/xilinx.txt +++ b/Documentation/devicetree/bindings/arm/xilinx.txt @@ -15,6 +15,7 @@ Additional compatible strings: "xlnx,zynq-zc770-xm010" "xlnx,zynq-zc770-xm011" "xlnx,zynq-zc770-xm012" + "xlnx,zynq-zc770-xm013" --------------------------------------------------------------- diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 2c74b935ad1c..d5de3748a80a 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1070,6 +1070,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \ zynq-zc770-xm010.dtb \ zynq-zc770-xm011.dtb \ zynq-zc770-xm012.dtb \ + zynq-zc770-xm013.dtb \ zynq-zed.dtb \ zynq-zybo.dtb dtb-$(CONFIG_MACH_ARMADA_370) += \ diff --git a/arch/arm/boot/dts/zynq-zc770-xm013.dts b/arch/arm/boot/dts/zynq-zc770-xm013.dts new file mode 100644 index 000000000000..8bb66859d774 --- /dev/null +++ b/arch/arm/boot/dts/zynq-zc770-xm013.dts @@ -0,0 +1,78 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Xilinx ZC770 XM013 board DTS + * + * Copyright (C) 2013 Xilinx, Inc. + */ +/dts-v1/; +#include "zynq-7000.dtsi" + +/ { + compatible = "xlnx,zynq-zc770-xm013", "xlnx,zynq-7000"; + model = "Xilinx Zynq"; + + aliases { + ethernet0 = &gem1; + i2c0 = &i2c1; + serial0 = &uart0; + spi1 = &spi0; + }; + + chosen { + bootargs = ""; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x40000000>; + }; +}; + +&can1 { + status = "okay"; +}; + +&gem1 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + + ethernet_phy: ethernet-phy@7 { + reg = <7>; + device_type = "ethernet-phy"; + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + si570: clock-generator@55 { + #clock-cells = <0>; + compatible = "silabs,si570"; + temperature-stability = <50>; + reg = <0x55>; + factory-fout = <156250000>; + clock-frequency = <148500000>; + }; +}; + +&spi0 { + status = "okay"; + num-cs = <4>; + is-decoded-cs = <0>; + eeprom: eeprom@0 { + at25,byte-len = <8192>; + at25,addr-mode = <2>; + at25,page-size = <32>; + + compatible = "atmel,at25"; + reg = <2>; + spi-max-frequency = <1000000>; + }; +}; + +&uart0 { + status = "okay"; +}; From ba5c7a032c2ae66d5467820daab898e5f9048405 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Wed, 28 Feb 2018 11:25:52 +0900 Subject: [PATCH 22/22] arm: dts: zynq: Add Digilent Zybo Z7 board This add a DTS for the Digilent Zybo Z7 board. This board is the successor board of Zybo, these are almost the same except for ps-clk-frequency specifications. Signed-off-by: Nobuhiro Iwamatsu Reviewed-by: Rob Herring Signed-off-by: Michal Simek --- .../devicetree/bindings/arm/xilinx.txt | 3 + arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/zynq-zybo-z7.dts | 58 +++++++++++++++++++ 3 files changed, 63 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/zynq-zybo-z7.dts diff --git a/Documentation/devicetree/bindings/arm/xilinx.txt b/Documentation/devicetree/bindings/arm/xilinx.txt index 06e07952d509..b9043bc35c14 100644 --- a/Documentation/devicetree/bindings/arm/xilinx.txt +++ b/Documentation/devicetree/bindings/arm/xilinx.txt @@ -17,6 +17,9 @@ Additional compatible strings: "xlnx,zynq-zc770-xm012" "xlnx,zynq-zc770-xm013" +- Digilent Zybo Z7 board + "digilent,zynq-zybo-z7" + --------------------------------------------------------------- Xilinx Zynq UltraScale+ MPSoC Platforms Device Tree Bindings diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index d5de3748a80a..7741adcc72f6 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1072,7 +1072,8 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \ zynq-zc770-xm012.dtb \ zynq-zc770-xm013.dtb \ zynq-zed.dtb \ - zynq-zybo.dtb + zynq-zybo.dtb \ + zynq-zybo-z7.dtb dtb-$(CONFIG_MACH_ARMADA_370) += \ armada-370-db.dtb \ armada-370-dlink-dns327l.dtb \ diff --git a/arch/arm/boot/dts/zynq-zybo-z7.dts b/arch/arm/boot/dts/zynq-zybo-z7.dts new file mode 100644 index 000000000000..1e713dc98920 --- /dev/null +++ b/arch/arm/boot/dts/zynq-zybo-z7.dts @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; +#include "zynq-7000.dtsi" + +/ { + model = "Zynq ZYBO Z7 Development Board"; + compatible = "digilent,zynq-zybo-z7", "xlnx,zynq-7000"; + + aliases { + ethernet0 = &gem0; + serial0 = &uart1; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x20000000>; + }; + + chosen { + bootargs = ""; + stdout-path = "serial0:115200n8"; + }; + + usb_phy0: phy0 { + #phy-cells = <0>; + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio0 46 1>; + }; +}; + +&clkc { + ps-clk-frequency = <33333333>; +}; + +&gem0 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + + ethernet_phy: ethernet-phy@0 { + reg = <0>; + device_type = "ethernet-phy"; + }; +}; + +&sdhci0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; + usb-phy = <&usb_phy0>; +};