arm64: dts: rockchip: add some peripheral configuration for px30-evb-ddr4-v10.dts
Change-Id: Ib06470461d3fb70c57c0f88724c29dec28237600 Signed-off-by: Weixin Zhou <zwx@rock-chips.com>
This commit is contained in:
Zhou weixin
Tao Huang
parent
121437d0c1
commit
30ed75c6a1
2 changed files with 161 additions and 0 deletions
|
|
@ -126,3 +126,7 @@ Rockchip platforms device tree bindings
|
|||
- Rockchip PX30 evb ddr3 board:
|
||||
Required root node properties:
|
||||
- compatible = "rockchip,px30-evb-ddr3-v10", "rockchip,px30";
|
||||
|
||||
- Rockchip PX30 evb ddr4 board:
|
||||
Required root node properties:
|
||||
- compatible = "rockchip,px30-evb-ddr4-v10", "rockchip,px30";
|
||||
|
|
|
|||
|
|
@ -6,11 +6,54 @@
|
|||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/display/drm_mipi_dsi.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include <dt-bindings/sensor-dev.h>
|
||||
#include "px30.dtsi"
|
||||
#include "px30-android.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Rockchip PX30 evb ddr4 board";
|
||||
compatible = "rockchip,px30-evb-ddr4-v10", "rockchip,px30";
|
||||
|
||||
adc-keys {
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&saradc 2>;
|
||||
io-channel-names = "buttons";
|
||||
keyup-threshold-microvolt = <1800000>;
|
||||
|
||||
esc-key {
|
||||
linux,code = <KEY_ESC>;
|
||||
label = "esc";
|
||||
press-threshold-microvolt = <614000>;
|
||||
};
|
||||
|
||||
home-key {
|
||||
linux,code = <KEY_HOME>;
|
||||
label = "home";
|
||||
press-threshold-microvolt = <254000>;
|
||||
};
|
||||
|
||||
menu-key {
|
||||
linux,code = <KEY_MENU>;
|
||||
label = "menu";
|
||||
press-threshold-microvolt = <414000>;
|
||||
};
|
||||
|
||||
vol-up-key {
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
label = "volume up";
|
||||
press-threshold-microvolt = <10000>;
|
||||
};
|
||||
|
||||
vol-down-key {
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
label = "volume down";
|
||||
press-threshold-microvolt = <170000>;
|
||||
};
|
||||
};
|
||||
|
||||
backlight: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pwm1 0 25000 0>;
|
||||
|
|
@ -50,12 +93,49 @@
|
|||
default-brightness-level = <200>;
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
/*clocks = <&rk809 1>;*/
|
||||
/*clock-names = "ext_clock";*/
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_enable_h>;
|
||||
|
||||
/*
|
||||
* On the module itself this is one of these (depending
|
||||
* on the actual card populated):
|
||||
* - SDIO_RESET_L_WL_REG_ON
|
||||
* - PDN (power down when low)
|
||||
*/
|
||||
reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO3_A4 */
|
||||
};
|
||||
|
||||
vcc_phy: vcc-phy-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_phy";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
wireless-wlan {
|
||||
compatible = "wlan-platdata";
|
||||
wifi_chip_type = "AP6210";
|
||||
WIFI,host_wake_irq = <&gpio0 RK_PB2 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
wireless-bluetooth {
|
||||
compatible = "bluetooth-platdata";
|
||||
/*clocks = <&rk809 1>;*/
|
||||
/*clock-names = "ext_clock";*/
|
||||
uart_rts_gpios = <&gpio1 RK_PC3 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default","rts_gpio";
|
||||
pinctrl-0 = <&uart1_rts>;
|
||||
pinctrl-1 = <&uart1_rts_gpio>;
|
||||
BT,reset_gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
|
||||
BT,wake_gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
|
||||
BT,wake_host_irq = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&display_subsystem {
|
||||
|
|
@ -185,6 +265,19 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
&emmc {
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
mmc-hs200-1_8v;
|
||||
supports-emmc;
|
||||
disable-wp;
|
||||
non-removable;
|
||||
num-slots = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac {
|
||||
phy-supply = <&vcc_phy>;
|
||||
clock_in_out = "output";
|
||||
|
|
@ -194,10 +287,42 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
|
||||
ts@40 {
|
||||
status = "okay";
|
||||
compatible = "GT1X";
|
||||
reg = <0x14>;
|
||||
irq_gpio_number = <&gpio0 RK_PA5 IRQ_TYPE_LEVEL_LOW>;
|
||||
rst_gpio_number = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
sensor@4c {
|
||||
status = "okay";
|
||||
compatible = "gs_mma7660";
|
||||
reg = <0x4c>;
|
||||
type = <SENSOR_TYPE_ACCEL>;
|
||||
irq-gpio = <&gpio0 RK_PB5 IRQ_TYPE_LEVEL_LOW>;
|
||||
irq_enable = <0>;
|
||||
poll_delay_ms = <30>;
|
||||
layout = <6>;
|
||||
reprobe_en = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&mipi_dphy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
sdio-pwrseq {
|
||||
wifi_enable_h: wifi-enable-h {
|
||||
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -206,6 +331,38 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
cap-mmc-highspeed;
|
||||
supports-sd;
|
||||
broken-cd;
|
||||
card-detect-delay = <800>;
|
||||
ignore-pm-notify;
|
||||
keep-power-in-suspend;
|
||||
/*cd-gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>; [> CD GPIO <]*/
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&sdio {
|
||||
max-frequency = <50000000>;
|
||||
cap-sd-highspeed;
|
||||
supports-sdio;
|
||||
ignore-pm-notify;
|
||||
keep-power-in-suspend;
|
||||
non-removable;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1_xfer &uart1_cts>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopb {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue