diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 4952a2277935..dae1bd7529f8 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -211,6 +211,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nvr-demo-v10-linux-spi-nand.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nvr-demo-v12-linux.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nvr-demo-v12-linux-spi-nand.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-pcie-ep-lp4x-v10-linux.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-cm3i-io.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-toybrick-sd0-android.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-toybrick-sd0-linux.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-toybrick-x0-android.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i-io.dts b/arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i-io.dts new file mode 100644 index 000000000000..0c34819338a3 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i-io.dts @@ -0,0 +1,330 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Rockchip Electronics Co., Ltd. + * Copyright (c) 2023 Radxa Computer (Shenzhen) Co., Ltd. + * + */ + +/dts-v1/; + +#include "rk3568-radxa-cm3i.dtsi" + +/ { + model = "Radxa CM3I IO Board"; + compatible = "radxa,cm3i-io", "radxa,cm3i", "rockchip,rk3568"; + + fan0: pwm-fan { + compatible = "pwm-fan"; + #cooling-cells = <2>; + cooling-levels = <0 64 128 192 255>; + pwms = <&pwm8 0 10000 0>; + }; + + vcc12v_dcin: vcc12v-dcin { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc5v0_usb: vcc5v0-usb { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_en>; + regulator-name = "vcc5v0_usb"; + }; + + pcie30_3v3: pcie30-3v3 { + compatible = "regulator-fixed"; + regulator-name = "pcie30_3v3"; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie3v3_en>; + }; + + hdmi_sound: hdmi-sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <128>; + simple-audio-card,name = "rockchip-hdmi0"; + status = "okay"; + + simple-audio-card,cpu { + sound-dai = <&i2s0_8ch>; + }; + simple-audio-card,codec { + sound-dai = <&hdmi>; + }; + }; +}; + +&vcc5v0_sys { + vin-supply = <&vcc12v_dcin>; +}; + +&gmac0 { + phy-mode = "rgmii"; + clock_in_out = "output"; + + snps,reset-gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + /* Reset time is 20ms, 100ms for rtl8211f */ + snps,reset-delays-us = <0 20000 100000>; + + assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; + assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>; + assigned-clock-rates = <0>, <125000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&gmac0_miim + &gmac0_tx_bus2 + &gmac0_rx_bus2 + &gmac0_rgmii_clk + &gmac0_rgmii_bus>; + + tx_delay = <0x36>; + rx_delay = <0x2d>; + + phy-handle = <&rgmii_phy0>; + status = "okay"; +}; + +&mdio0 { + status = "okay"; + + rgmii_phy0: phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0>; + }; +}; + +&gmac1 { + status = "okay"; +}; + +&mdio1 { + status = "okay"; +}; + +&pwm8 { + status = "okay"; + pinctrl-0 = <&pwm8m0_pins>; +}; + +&u2phy0_host { + status = "okay"; +}; + +&u2phy0_otg { + vbus-supply = <&vcc5v0_usb>; + status = "okay"; +}; + +&u2phy1_otg { + status = "okay"; +}; + +&u2phy1_host { + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy1 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd_dwc3 { + dr_mode = "host"; + status = "okay"; +}; + +&usbdrd30 { + status = "okay"; +}; + +&usbhost_dwc3 { + status = "okay"; +}; + +&usbhost30 { + status = "okay"; +}; + +&combphy0_us { + status = "okay"; +}; + +&combphy1_usq { + status = "okay"; +}; + +&hdmi { + status = "okay"; + pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm0_cec>; +}; + +&hdmi_in_vp0 { + status = "okay"; +}; + +&route_hdmi { + status = "okay"; + connect = <&vp0_out_hdmi>; +}; + +&i2s0_8ch { + status = "okay"; +}; + +&i2s1_8ch { + status = "okay"; +}; + +&rk809_sound { + simple-audio-card,hp-det-gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hp_det>; + status = "okay"; +}; + +&rk809_codec { + status = "okay"; +}; + +&combphy2_psq { + status = "okay"; +}; + +&pcie30phy { + status = "okay"; +}; + +&pcie3x2 { + reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&pcie30_3v3>; + pinctrl-0 = <&pcie30x2m1_pins>; + rockchip,bifurcation; + status = "okay"; +}; + +&pcie3x1 { + reset-gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&pcie30_3v3>; + pinctrl-0 = <&pcie30x1m1_pins>; + rockchip,bifurcation; + status = "okay"; +}; + +&pcie2x1 { + reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&pcie30_3v3>; + pinctrl-0 = <&pcie20m1_pins>; + status = "disabled"; +}; + +&sata2 { + status = "okay"; +}; + +&soc_thermal { + sustainable-power = <5000>; /* milliwatts */ + cooling-maps { + map2 { + trip = <&target>; + cooling-device = + <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + contribution = <8192>; + }; + map3 { + trip = <&threshold>; + cooling-device = + <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + contribution = <8192>; + }; + }; +}; + +&threshold { + temperature = <60000>; +}; + +&i2c1 { + status = "okay"; + pinctrl-0 = <&i2c1_xfer>; + + hym8563: hym8563@51 { + compatible = "haoyu,hym8563"; + status = "okay"; + reg = <0x51>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "hym8563"; + }; +}; + +&rk809 { + rtc { + status = "disabled"; + }; +}; + +&uart5 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart5m1_xfer>; +}; + +&can1 { + status = "okay"; + compatible = "rockchip,can-1.0"; + assigned-clocks = <&cru CLK_CAN1>; + assigned-clock-rates = <200000000>; + pinctrl-names = "default"; + pinctrl-0 = <&can1m0_pins>; +}; + +&pinctrl { + usb { + vcc5v0_en: vcc5v0-en { + rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie { + pcie3v3_en: pcie3v3-en { + rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + headphone { + hp_det: hp-det { + rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; \ No newline at end of file diff --git a/arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi new file mode 100644 index 000000000000..4fbc8d874096 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi @@ -0,0 +1,692 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Rockchip Electronics Co., Ltd. + * Copyright (c) 2023 Radxa Computer (Shenzhen) Co., Ltd. + * + */ + +/dts-v1/; +#include +#include +#include +#include +#include +#include +#include "rk3568.dtsi" +#include "rk3568-linux.dtsi" + +/ { + compatible = "radxa,cm3i", "rockchip,rk3568"; + + /delete-node/ chosen; + + rk809_sound: rk809-sound { + status = "disabled"; + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,name = "rockchip-rk809"; + simple-audio-card,mclk-fs = <256>; + + simple-audio-card,cpu { + sound-dai = <&i2s1_8ch>; + }; + simple-audio-card,codec { + sound-dai = <&rk809_codec>; + }; + }; + + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + sdio_pwrseq: sdio-pwrseq { + status = "okay"; + compatible = "mmc-pwrseq-simple"; + clocks = <&rk809 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + + /* + * On the module itself this is one of these (depending + * on the actual card populated): + * - SDIO_RESET_L_WL_REG_ON + * - PDN (power down when low) + */ + reset-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>; + }; + + gpio_leds: gpio-leds { + compatible = "gpio-leds"; + status = "okay"; + user_leds: user-led { + gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "on"; + pinctrl-0 = <&user_led>; + }; + }; +}; + +&pmu_io_domains { + status = "okay"; + pmuio2-supply = <&vcc_3v3>; + vccio1-supply = <&vccio_acodec>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcc_1v8>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_1v8>; + vccio7-supply = <&vcc_3v3>; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&dfi { + status = "okay"; +}; + +&dmc { + center-supply = <&vdd_logic>; + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + vdd_cpu: tcs4525@1c { + compatible = "tcs,tcs452x"; + reg = <0x1c>; + vin-supply = <&vcc5v0_sys>; + regulator-compatible = "fan53555-reg"; + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1390000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <2300>; + fcs,suspend-voltage-selector = <1>; + regulator-boot-on; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default", "pmic-sleep", + "pmic-power-off", "pmic-reset"; + pinctrl-0 = <&pmic_int>; + pinctrl-1 = <&soc_slppin_slp>, <&rk817_slppin_slp>; + pinctrl-2 = <&soc_slppin_gpio>, <&rk817_slppin_pwrdn>; + pinctrl-3 = <&soc_slppin_gpio>, <&rk817_slppin_rst>; + + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + clock-output-names = "rk808-clkout1", "rk808-clkout2"; + //fb-inner-reg-idxs = <2>; + /* 1: rst regs (default in codes), 0: rst the pmic */ + pmic-reset-func = <0>; + /* not save the PMIC_POWER_EN register in uboot */ + not-save-power-en = <1>; + + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + + pwrkey { + status = "okay"; + }; + + pinctrl_rk8xx: pinctrl_rk8xx { + gpio-controller; + #gpio-cells = <2>; + + rk817_slppin_null: rk817_slppin_null { + pins = "gpio_slp"; + function = "pin_fun0"; + }; + + rk817_slppin_slp: rk817_slppin_slp { + pins = "gpio_slp"; + function = "pin_fun1"; + }; + + rk817_slppin_pwrdn: rk817_slppin_pwrdn { + pins = "gpio_slp"; + function = "pin_fun2"; + }; + + rk817_slppin_rst: rk817_slppin_rst { + pins = "gpio_slp"; + function = "pin_fun3"; + }; + }; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_logic"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_gpu"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-name = "vcc_ddr"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_npu: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_npu"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_image: LDO_REG1 { + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda0v9_image"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda_0v9"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda0v9_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_acodec"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca_1v8: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca_1v8"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pmu: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_image: LDO_REG9 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_image"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3: SWITCH_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_3v3"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_sd: SWITCH_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc3v3_sd"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + + rk809_codec: codec { + #sound-dai-cells = <0>; + compatible = "rockchip,rk809-codec", "rockchip,rk817-codec"; + clocks = <&cru I2S1_MCLKOUT_TX>; + clock-names = "mclk"; + assigned-clocks = <&cru I2S1_MCLKOUT_TX>; + assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s1m0_mclk>; + hp-volume = <20>; + spk-volume = <3>; + mic-in-differential; + status = "disabled"; + }; + }; + + eeprom: at24c16@50 { + status = "okay"; + compatible = "atmel,24c16"; + reg = <0x50>; + pagesize = <16>; + }; +}; + +&i2s1_8ch { + status = "disabled"; + rockchip,clk-trcm = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s1m0_sclktx + &i2s1m0_lrcktx + &i2s1m0_sdi0 + &i2s1m0_sdo0>; +}; + +&gmac1 { + phy-mode = "rgmii"; + clock_in_out = "output"; + + snps,reset-gpio = <&gpio4 RK_PC3 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + /* Reset time is 20ms, 100ms for rtl8211f */ + snps,reset-delays-us = <0 20000 100000>; + + assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>; + assigned-clock-rates = <0>, <125000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&gmac1m1_miim + &gmac1m1_tx_bus2 + &gmac1m1_rx_bus2 + &gmac1m1_rgmii_clk + &gmac1m1_rgmii_bus>; + + tx_delay = <0x44>; + rx_delay = <0x26>; + + phy-handle = <&rgmii_phy1>; + status = "disabled"; +}; + +&mdio1 { + status = "disabled"; + + rgmii_phy1: phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0>; + }; +}; + +&iep { + status = "okay"; +}; + +&iep_mmu { + status = "okay"; +}; + +&jpegd { + status = "okay"; +}; + +&jpegd_mmu { + status = "okay"; +}; + +&mpp_srv { + status = "okay"; +}; + +&rk_rga { + status = "okay"; +}; + +&rkvdec { + status = "okay"; +}; + +&rkvdec_mmu { + status = "okay"; +}; + +&rkvenc { + venc-supply = <&vdd_logic>; + status = "okay"; +}; + +&rkvenc_mmu { + status = "okay"; +}; + +&rknpu { + rknpu-supply = <&vdd_npu>; +}; + +&saradc { + status = "okay"; + vref-supply = <&vcca_1v8>; +}; + +&sdhci { + bus-width = <8>; + supports-emmc; + non-removable; + max-frequency = <200000000>; + status = "okay"; +}; + +&sdmmc0 { + max-frequency = <150000000>; + supports-sd; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v3_sd>; + vqmmc-supply = <&vccio_sd>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + status = "okay"; +}; + +&sdmmc2 { + max-frequency = <150000000>; + supports-sdio; + bus-width = <4>; + disable-wp; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>; + sd-uhs-sdr104; + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio3>; + interrupts = ; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake_l>; + }; +}; + +&sfc { + status = "okay"; + max-freq = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&fspi_pins>; + + spi_flash: spi-flash@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-max-frequency = <50000000>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + }; +}; + +&tsadc { + status = "okay"; +}; + +&vdpu { + status = "okay"; +}; + +&vdpu_mmu { + status = "okay"; +}; + +&vepu { + status = "okay"; +}; + +&vepu_mmu { + status = "okay"; +}; + +&vop { + status = "okay"; + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; +}; + +&vop_mmu { + status = "okay"; +}; + +&uart8 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart8m0_xfer &uart8m0_ctsn>; + + bluetooth { + compatible = "brcm,bcm4345c5"; + clocks = <&rk809 1>; + clock-names = "lpo"; + device-wakeup-gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; + max-speed = <1500000>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; + vbat-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_1v8>; + }; +}; + +&rockchip_suspend { + status = "okay"; + rockchip,sleep-debug-en = <1>; + rockchip,sleep-mode-config = < + (0 + | RKPM_SLP_CENTER_OFF + | RKPM_SLP_HW_PLLS_OFF + | RKPM_SLP_PMUALIVE_32K + | RKPM_SLP_32K_PVTM + ) + >; + rockchip,wakeup-config = < + (0 + | RKPM_GPIO_WKUP_EN + | RKPM_USB_WKUP_EN + ) + >; +}; + +&pinctrl { + pmic { + pmic_int: pmic_int { + rockchip,pins = + <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + soc_slppin_gpio: soc_slppin_gpio { + rockchip,pins = + <0 RK_PA2 RK_FUNC_GPIO &pcfg_output_low_pull_down>; + }; + + soc_slppin_slp: soc_slppin_slp { + rockchip,pins = + <0 RK_PA2 1 &pcfg_pull_up>; + }; + + soc_slppin_rst: soc_slppin_rst { + rockchip,pins = + <0 RK_PA2 2 &pcfg_pull_none>; + }; + }; + + wifi { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wifi_host_wake_l: wifi-host-wake-irq { + rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + bt { + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_enable_h: bt-enable-h { + rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + user_led: user-led { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; \ No newline at end of file