e216975ad9
Use the #define where appropriate. Add #include <linux/if_ether.h> where appropriate too. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
204 lines
8.4 KiB
C
204 lines
8.4 KiB
C
#ifndef _LINUX_VIRTIO_NET_H
|
|
#define _LINUX_VIRTIO_NET_H
|
|
/* This header is BSD licensed so anyone can use the definitions to implement
|
|
* compatible drivers/servers.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of IBM nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE. */
|
|
#include <linux/types.h>
|
|
#include <linux/virtio_ids.h>
|
|
#include <linux/virtio_config.h>
|
|
#include <linux/if_ether.h>
|
|
|
|
/* The feature bitmap for virtio net */
|
|
#define VIRTIO_NET_F_CSUM 0 /* Host handles pkts w/ partial csum */
|
|
#define VIRTIO_NET_F_GUEST_CSUM 1 /* Guest handles pkts w/ partial csum */
|
|
#define VIRTIO_NET_F_MAC 5 /* Host has given MAC address. */
|
|
#define VIRTIO_NET_F_GSO 6 /* Host handles pkts w/ any GSO type */
|
|
#define VIRTIO_NET_F_GUEST_TSO4 7 /* Guest can handle TSOv4 in. */
|
|
#define VIRTIO_NET_F_GUEST_TSO6 8 /* Guest can handle TSOv6 in. */
|
|
#define VIRTIO_NET_F_GUEST_ECN 9 /* Guest can handle TSO[6] w/ ECN in. */
|
|
#define VIRTIO_NET_F_GUEST_UFO 10 /* Guest can handle UFO in. */
|
|
#define VIRTIO_NET_F_HOST_TSO4 11 /* Host can handle TSOv4 in. */
|
|
#define VIRTIO_NET_F_HOST_TSO6 12 /* Host can handle TSOv6 in. */
|
|
#define VIRTIO_NET_F_HOST_ECN 13 /* Host can handle TSO[6] w/ ECN in. */
|
|
#define VIRTIO_NET_F_HOST_UFO 14 /* Host can handle UFO in. */
|
|
#define VIRTIO_NET_F_MRG_RXBUF 15 /* Host can merge receive buffers. */
|
|
#define VIRTIO_NET_F_STATUS 16 /* virtio_net_config.status available */
|
|
#define VIRTIO_NET_F_CTRL_VQ 17 /* Control channel available */
|
|
#define VIRTIO_NET_F_CTRL_RX 18 /* Control channel RX mode support */
|
|
#define VIRTIO_NET_F_CTRL_VLAN 19 /* Control channel VLAN filtering */
|
|
#define VIRTIO_NET_F_CTRL_RX_EXTRA 20 /* Extra RX mode control support */
|
|
#define VIRTIO_NET_F_GUEST_ANNOUNCE 21 /* Guest can announce device on the
|
|
* network */
|
|
#define VIRTIO_NET_F_MQ 22 /* Device supports Receive Flow
|
|
* Steering */
|
|
#define VIRTIO_NET_F_CTRL_MAC_ADDR 23 /* Set MAC address */
|
|
|
|
#define VIRTIO_NET_S_LINK_UP 1 /* Link is up */
|
|
#define VIRTIO_NET_S_ANNOUNCE 2 /* Announcement is needed */
|
|
|
|
struct virtio_net_config {
|
|
/* The config defining mac address (if VIRTIO_NET_F_MAC) */
|
|
__u8 mac[ETH_ALEN];
|
|
/* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */
|
|
__u16 status;
|
|
/* Maximum number of each of transmit and receive queues;
|
|
* see VIRTIO_NET_F_MQ and VIRTIO_NET_CTRL_MQ.
|
|
* Legal values are between 1 and 0x8000
|
|
*/
|
|
__u16 max_virtqueue_pairs;
|
|
} __attribute__((packed));
|
|
|
|
/* This header comes first in the scatter-gather list.
|
|
* If VIRTIO_F_ANY_LAYOUT is not negotiated, it must
|
|
* be the first element of the scatter-gather list. If you don't
|
|
* specify GSO or CSUM features, you can simply ignore the header. */
|
|
struct virtio_net_hdr {
|
|
#define VIRTIO_NET_HDR_F_NEEDS_CSUM 1 // Use csum_start, csum_offset
|
|
#define VIRTIO_NET_HDR_F_DATA_VALID 2 // Csum is valid
|
|
__u8 flags;
|
|
#define VIRTIO_NET_HDR_GSO_NONE 0 // Not a GSO frame
|
|
#define VIRTIO_NET_HDR_GSO_TCPV4 1 // GSO frame, IPv4 TCP (TSO)
|
|
#define VIRTIO_NET_HDR_GSO_UDP 3 // GSO frame, IPv4 UDP (UFO)
|
|
#define VIRTIO_NET_HDR_GSO_TCPV6 4 // GSO frame, IPv6 TCP
|
|
#define VIRTIO_NET_HDR_GSO_ECN 0x80 // TCP has ECN set
|
|
__u8 gso_type;
|
|
__u16 hdr_len; /* Ethernet + IP + tcp/udp hdrs */
|
|
__u16 gso_size; /* Bytes to append to hdr_len per frame */
|
|
__u16 csum_start; /* Position to start checksumming from */
|
|
__u16 csum_offset; /* Offset after that to place checksum */
|
|
};
|
|
|
|
/* This is the version of the header to use when the MRG_RXBUF
|
|
* feature has been negotiated. */
|
|
struct virtio_net_hdr_mrg_rxbuf {
|
|
struct virtio_net_hdr hdr;
|
|
__u16 num_buffers; /* Number of merged rx buffers */
|
|
};
|
|
|
|
/*
|
|
* Control virtqueue data structures
|
|
*
|
|
* The control virtqueue expects a header in the first sg entry
|
|
* and an ack/status response in the last entry. Data for the
|
|
* command goes in between.
|
|
*/
|
|
struct virtio_net_ctrl_hdr {
|
|
__u8 class;
|
|
__u8 cmd;
|
|
} __attribute__((packed));
|
|
|
|
typedef __u8 virtio_net_ctrl_ack;
|
|
|
|
#define VIRTIO_NET_OK 0
|
|
#define VIRTIO_NET_ERR 1
|
|
|
|
/*
|
|
* Control the RX mode, ie. promisucous, allmulti, etc...
|
|
* All commands require an "out" sg entry containing a 1 byte
|
|
* state value, zero = disable, non-zero = enable. Commands
|
|
* 0 and 1 are supported with the VIRTIO_NET_F_CTRL_RX feature.
|
|
* Commands 2-5 are added with VIRTIO_NET_F_CTRL_RX_EXTRA.
|
|
*/
|
|
#define VIRTIO_NET_CTRL_RX 0
|
|
#define VIRTIO_NET_CTRL_RX_PROMISC 0
|
|
#define VIRTIO_NET_CTRL_RX_ALLMULTI 1
|
|
#define VIRTIO_NET_CTRL_RX_ALLUNI 2
|
|
#define VIRTIO_NET_CTRL_RX_NOMULTI 3
|
|
#define VIRTIO_NET_CTRL_RX_NOUNI 4
|
|
#define VIRTIO_NET_CTRL_RX_NOBCAST 5
|
|
|
|
/*
|
|
* Control the MAC
|
|
*
|
|
* The MAC filter table is managed by the hypervisor, the guest should
|
|
* assume the size is infinite. Filtering should be considered
|
|
* non-perfect, ie. based on hypervisor resources, the guest may
|
|
* received packets from sources not specified in the filter list.
|
|
*
|
|
* In addition to the class/cmd header, the TABLE_SET command requires
|
|
* two out scatterlists. Each contains a 4 byte count of entries followed
|
|
* by a concatenated byte stream of the ETH_ALEN MAC addresses. The
|
|
* first sg list contains unicast addresses, the second is for multicast.
|
|
* This functionality is present if the VIRTIO_NET_F_CTRL_RX feature
|
|
* is available.
|
|
*
|
|
* The ADDR_SET command requests one out scatterlist, it contains a
|
|
* 6 bytes MAC address. This functionality is present if the
|
|
* VIRTIO_NET_F_CTRL_MAC_ADDR feature is available.
|
|
*/
|
|
struct virtio_net_ctrl_mac {
|
|
__u32 entries;
|
|
__u8 macs[][ETH_ALEN];
|
|
} __attribute__((packed));
|
|
|
|
#define VIRTIO_NET_CTRL_MAC 1
|
|
#define VIRTIO_NET_CTRL_MAC_TABLE_SET 0
|
|
#define VIRTIO_NET_CTRL_MAC_ADDR_SET 1
|
|
|
|
/*
|
|
* Control VLAN filtering
|
|
*
|
|
* The VLAN filter table is controlled via a simple ADD/DEL interface.
|
|
* VLAN IDs not added may be filterd by the hypervisor. Del is the
|
|
* opposite of add. Both commands expect an out entry containing a 2
|
|
* byte VLAN ID. VLAN filterting is available with the
|
|
* VIRTIO_NET_F_CTRL_VLAN feature bit.
|
|
*/
|
|
#define VIRTIO_NET_CTRL_VLAN 2
|
|
#define VIRTIO_NET_CTRL_VLAN_ADD 0
|
|
#define VIRTIO_NET_CTRL_VLAN_DEL 1
|
|
|
|
/*
|
|
* Control link announce acknowledgement
|
|
*
|
|
* The command VIRTIO_NET_CTRL_ANNOUNCE_ACK is used to indicate that
|
|
* driver has recevied the notification; device would clear the
|
|
* VIRTIO_NET_S_ANNOUNCE bit in the status field after it receives
|
|
* this command.
|
|
*/
|
|
#define VIRTIO_NET_CTRL_ANNOUNCE 3
|
|
#define VIRTIO_NET_CTRL_ANNOUNCE_ACK 0
|
|
|
|
/*
|
|
* Control Receive Flow Steering
|
|
*
|
|
* The command VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET
|
|
* enables Receive Flow Steering, specifying the number of the transmit and
|
|
* receive queues that will be used. After the command is consumed and acked by
|
|
* the device, the device will not steer new packets on receive virtqueues
|
|
* other than specified nor read from transmit virtqueues other than specified.
|
|
* Accordingly, driver should not transmit new packets on virtqueues other than
|
|
* specified.
|
|
*/
|
|
struct virtio_net_ctrl_mq {
|
|
__u16 virtqueue_pairs;
|
|
};
|
|
|
|
#define VIRTIO_NET_CTRL_MQ 4
|
|
#define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET 0
|
|
#define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MIN 1
|
|
#define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX 0x8000
|
|
|
|
#endif /* _LINUX_VIRTIO_NET_H */
|