 69a11a3264
			
		
	
	
	69a11a3264
	
	
	
		
			
			Tested on my big-endian ppc-based test machine. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
		
			
				
	
	
		
			1736 lines
		
	
	
	
		
			44 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			1736 lines
		
	
	
	
		
			44 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|    cx231xx-core.c - driver for Conexant Cx23100/101/102
 | |
| 				USB video capture devices
 | |
| 
 | |
|    Copyright (C) 2008 <srinivasa.deevi at conexant dot com>
 | |
| 				Based on em28xx driver
 | |
| 
 | |
|    This program is free software; you can redistribute it and/or modify
 | |
|    it under the terms of the GNU General Public License as published by
 | |
|    the Free Software Foundation; either version 2 of the License, or
 | |
|    (at your option) any later version.
 | |
| 
 | |
|    This program is distributed in the hope that it will be useful,
 | |
|    but WITHOUT ANY WARRANTY; without even the implied warranty of
 | |
|    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 | |
|    GNU General Public License for more details.
 | |
| 
 | |
|    You should have received a copy of the GNU General Public License
 | |
|    along with this program; if not, write to the Free Software
 | |
|    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 | |
|  */
 | |
| 
 | |
| #include <linux/init.h>
 | |
| #include <linux/list.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/slab.h>
 | |
| #include <linux/usb.h>
 | |
| #include <linux/vmalloc.h>
 | |
| #include <media/v4l2-common.h>
 | |
| #include <media/tuner.h>
 | |
| 
 | |
| #include "cx231xx.h"
 | |
| #include "cx231xx-reg.h"
 | |
| 
 | |
| /* #define ENABLE_DEBUG_ISOC_FRAMES */
 | |
| 
 | |
| static unsigned int core_debug;
 | |
| module_param(core_debug, int, 0644);
 | |
| MODULE_PARM_DESC(core_debug, "enable debug messages [core]");
 | |
| 
 | |
| #define cx231xx_coredbg(fmt, arg...) do {\
 | |
| 	if (core_debug) \
 | |
| 		printk(KERN_INFO "%s %s :"fmt, \
 | |
| 			 dev->name, __func__ , ##arg); } while (0)
 | |
| 
 | |
| static unsigned int reg_debug;
 | |
| module_param(reg_debug, int, 0644);
 | |
| MODULE_PARM_DESC(reg_debug, "enable debug messages [URB reg]");
 | |
| 
 | |
| static int alt = CX231XX_PINOUT;
 | |
| module_param(alt, int, 0644);
 | |
| MODULE_PARM_DESC(alt, "alternate setting to use for video endpoint");
 | |
| 
 | |
| #define cx231xx_isocdbg(fmt, arg...) do {\
 | |
| 	if (core_debug) \
 | |
| 		printk(KERN_INFO "%s %s :"fmt, \
 | |
| 			 dev->name, __func__ , ##arg); } while (0)
 | |
| 
 | |
| /*****************************************************************
 | |
| *             Device control list functions     				 *
 | |
| ******************************************************************/
 | |
| 
 | |
| LIST_HEAD(cx231xx_devlist);
 | |
| static DEFINE_MUTEX(cx231xx_devlist_mutex);
 | |
| 
 | |
| /*
 | |
|  * cx231xx_realease_resources()
 | |
|  * unregisters the v4l2,i2c and usb devices
 | |
|  * called when the device gets disconected or at module unload
 | |
| */
 | |
| void cx231xx_remove_from_devlist(struct cx231xx *dev)
 | |
| {
 | |
| 	if (dev == NULL)
 | |
| 		return;
 | |
| 	if (dev->udev == NULL)
 | |
| 		return;
 | |
| 
 | |
| 	if (atomic_read(&dev->devlist_count) > 0) {
 | |
| 		mutex_lock(&cx231xx_devlist_mutex);
 | |
| 		list_del(&dev->devlist);
 | |
| 		atomic_dec(&dev->devlist_count);
 | |
| 		mutex_unlock(&cx231xx_devlist_mutex);
 | |
| 	}
 | |
| };
 | |
| 
 | |
| void cx231xx_add_into_devlist(struct cx231xx *dev)
 | |
| {
 | |
| 	mutex_lock(&cx231xx_devlist_mutex);
 | |
| 	list_add_tail(&dev->devlist, &cx231xx_devlist);
 | |
| 	atomic_inc(&dev->devlist_count);
 | |
| 	mutex_unlock(&cx231xx_devlist_mutex);
 | |
| };
 | |
| 
 | |
| static LIST_HEAD(cx231xx_extension_devlist);
 | |
| 
 | |
| int cx231xx_register_extension(struct cx231xx_ops *ops)
 | |
| {
 | |
| 	struct cx231xx *dev = NULL;
 | |
| 
 | |
| 	mutex_lock(&cx231xx_devlist_mutex);
 | |
| 	list_add_tail(&ops->next, &cx231xx_extension_devlist);
 | |
| 	list_for_each_entry(dev, &cx231xx_devlist, devlist)
 | |
| 		ops->init(dev);
 | |
| 
 | |
| 	printk(KERN_INFO DRIVER_NAME ": %s initialized\n", ops->name);
 | |
| 	mutex_unlock(&cx231xx_devlist_mutex);
 | |
| 	return 0;
 | |
| }
 | |
| EXPORT_SYMBOL(cx231xx_register_extension);
 | |
| 
 | |
| void cx231xx_unregister_extension(struct cx231xx_ops *ops)
 | |
| {
 | |
| 	struct cx231xx *dev = NULL;
 | |
| 
 | |
| 	mutex_lock(&cx231xx_devlist_mutex);
 | |
| 	list_for_each_entry(dev, &cx231xx_devlist, devlist)
 | |
| 		ops->fini(dev);
 | |
| 
 | |
| 
 | |
| 	printk(KERN_INFO DRIVER_NAME ": %s removed\n", ops->name);
 | |
| 	list_del(&ops->next);
 | |
| 	mutex_unlock(&cx231xx_devlist_mutex);
 | |
| }
 | |
| EXPORT_SYMBOL(cx231xx_unregister_extension);
 | |
| 
 | |
| void cx231xx_init_extension(struct cx231xx *dev)
 | |
| {
 | |
| 	struct cx231xx_ops *ops = NULL;
 | |
| 
 | |
| 	mutex_lock(&cx231xx_devlist_mutex);
 | |
| 	if (!list_empty(&cx231xx_extension_devlist)) {
 | |
| 		list_for_each_entry(ops, &cx231xx_extension_devlist, next) {
 | |
| 			if (ops->init)
 | |
| 				ops->init(dev);
 | |
| 		}
 | |
| 	}
 | |
| 	mutex_unlock(&cx231xx_devlist_mutex);
 | |
| }
 | |
| 
 | |
| void cx231xx_close_extension(struct cx231xx *dev)
 | |
| {
 | |
| 	struct cx231xx_ops *ops = NULL;
 | |
| 
 | |
| 	mutex_lock(&cx231xx_devlist_mutex);
 | |
| 	if (!list_empty(&cx231xx_extension_devlist)) {
 | |
| 		list_for_each_entry(ops, &cx231xx_extension_devlist, next) {
 | |
| 			if (ops->fini)
 | |
| 				ops->fini(dev);
 | |
| 		}
 | |
| 	}
 | |
| 	mutex_unlock(&cx231xx_devlist_mutex);
 | |
| }
 | |
| 
 | |
| /****************************************************************
 | |
| *               U S B related functions                         *
 | |
| *****************************************************************/
 | |
| int cx231xx_send_usb_command(struct cx231xx_i2c *i2c_bus,
 | |
| 			     struct cx231xx_i2c_xfer_data *req_data)
 | |
| {
 | |
| 	int status = 0;
 | |
| 	struct cx231xx *dev = i2c_bus->dev;
 | |
| 	struct VENDOR_REQUEST_IN ven_req;
 | |
| 
 | |
| 	u8 saddr_len = 0;
 | |
| 	u8 _i2c_period = 0;
 | |
| 	u8 _i2c_nostop = 0;
 | |
| 	u8 _i2c_reserve = 0;
 | |
| 
 | |
| 	if (dev->state & DEV_DISCONNECTED)
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	/* Get the I2C period, nostop and reserve parameters */
 | |
| 	_i2c_period = i2c_bus->i2c_period;
 | |
| 	_i2c_nostop = i2c_bus->i2c_nostop;
 | |
| 	_i2c_reserve = i2c_bus->i2c_reserve;
 | |
| 
 | |
| 	saddr_len = req_data->saddr_len;
 | |
| 
 | |
| 	/* Set wValue */
 | |
| 	if (saddr_len == 1)	/* need check saddr_len == 0  */
 | |
| 		ven_req.wValue =
 | |
| 		    req_data->
 | |
| 		    dev_addr << 9 | _i2c_period << 4 | saddr_len << 2 |
 | |
| 		    _i2c_nostop << 1 | I2C_SYNC | _i2c_reserve << 6;
 | |
| 	else
 | |
| 		ven_req.wValue =
 | |
| 		    req_data->
 | |
| 		    dev_addr << 9 | _i2c_period << 4 | saddr_len << 2 |
 | |
| 		    _i2c_nostop << 1 | I2C_SYNC | _i2c_reserve << 6;
 | |
| 
 | |
| 	/* set channel number */
 | |
| 	if (req_data->direction & I2C_M_RD) {
 | |
| 		/* channel number, for read,spec required channel_num +4 */
 | |
| 		ven_req.bRequest = i2c_bus->nr + 4;
 | |
| 	} else
 | |
| 		ven_req.bRequest = i2c_bus->nr;	/* channel number,  */
 | |
| 
 | |
| 	/* set index value */
 | |
| 	switch (saddr_len) {
 | |
| 	case 0:
 | |
| 		ven_req.wIndex = 0;	/* need check */
 | |
| 		break;
 | |
| 	case 1:
 | |
| 		ven_req.wIndex = (req_data->saddr_dat & 0xff);
 | |
| 		break;
 | |
| 	case 2:
 | |
| 		ven_req.wIndex = req_data->saddr_dat;
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	/* set wLength value */
 | |
| 	ven_req.wLength = req_data->buf_size;
 | |
| 
 | |
| 	/* set bData value */
 | |
| 	ven_req.bData = 0;
 | |
| 
 | |
| 	/* set the direction */
 | |
| 	if (req_data->direction) {
 | |
| 		ven_req.direction = USB_DIR_IN;
 | |
| 		memset(req_data->p_buffer, 0x00, ven_req.wLength);
 | |
| 	} else
 | |
| 		ven_req.direction = USB_DIR_OUT;
 | |
| 
 | |
| 	/* set the buffer for read / write */
 | |
| 	ven_req.pBuff = req_data->p_buffer;
 | |
| 
 | |
| 
 | |
| 	/* call common vendor command request */
 | |
| 	status = cx231xx_send_vendor_cmd(dev, &ven_req);
 | |
| 	if (status < 0) {
 | |
| 		cx231xx_info
 | |
| 		    ("UsbInterface::sendCommand, failed with status -%d\n",
 | |
| 		     status);
 | |
| 	}
 | |
| 
 | |
| 	return status;
 | |
| }
 | |
| EXPORT_SYMBOL_GPL(cx231xx_send_usb_command);
 | |
| 
 | |
| /*
 | |
|  * Sends/Receives URB control messages, assuring to use a kalloced buffer
 | |
|  * for all operations (dev->urb_buf), to avoid using stacked buffers, as
 | |
|  * they aren't safe for usage with USB, due to DMA restrictions.
 | |
|  * Also implements the debug code for control URB's.
 | |
|  */
 | |
| static int __usb_control_msg(struct cx231xx *dev, unsigned int pipe,
 | |
| 	__u8 request, __u8 requesttype, __u16 value, __u16 index,
 | |
| 	void *data, __u16 size, int timeout)
 | |
| {
 | |
| 	int rc, i;
 | |
| 
 | |
| 	if (reg_debug) {
 | |
| 		printk(KERN_DEBUG "%s: (pipe 0x%08x): "
 | |
| 				"%s:  %02x %02x %02x %02x %02x %02x %02x %02x ",
 | |
| 				dev->name,
 | |
| 				pipe,
 | |
| 				(requesttype & USB_DIR_IN) ? "IN" : "OUT",
 | |
| 				requesttype,
 | |
| 				request,
 | |
| 				value & 0xff, value >> 8,
 | |
| 				index & 0xff, index >> 8,
 | |
| 				size & 0xff, size >> 8);
 | |
| 		if (!(requesttype & USB_DIR_IN)) {
 | |
| 			printk(KERN_CONT ">>>");
 | |
| 			for (i = 0; i < size; i++)
 | |
| 				printk(KERN_CONT " %02x",
 | |
| 				       ((unsigned char *)data)[i]);
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/* Do the real call to usb_control_msg */
 | |
| 	mutex_lock(&dev->ctrl_urb_lock);
 | |
| 	if (!(requesttype & USB_DIR_IN) && size)
 | |
| 		memcpy(dev->urb_buf, data, size);
 | |
| 	rc = usb_control_msg(dev->udev, pipe, request, requesttype, value,
 | |
| 			     index, dev->urb_buf, size, timeout);
 | |
| 	if ((requesttype & USB_DIR_IN) && size)
 | |
| 		memcpy(data, dev->urb_buf, size);
 | |
| 	mutex_unlock(&dev->ctrl_urb_lock);
 | |
| 
 | |
| 	if (reg_debug) {
 | |
| 		if (unlikely(rc < 0)) {
 | |
| 			printk(KERN_CONT "FAILED!\n");
 | |
| 			return rc;
 | |
| 		}
 | |
| 
 | |
| 		if ((requesttype & USB_DIR_IN)) {
 | |
| 			printk(KERN_CONT "<<<");
 | |
| 			for (i = 0; i < size; i++)
 | |
| 				printk(KERN_CONT " %02x",
 | |
| 				       ((unsigned char *)data)[i]);
 | |
| 		}
 | |
| 		printk(KERN_CONT "\n");
 | |
| 	}
 | |
| 
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| 
 | |
| /*
 | |
|  * cx231xx_read_ctrl_reg()
 | |
|  * reads data from the usb device specifying bRequest and wValue
 | |
|  */
 | |
| int cx231xx_read_ctrl_reg(struct cx231xx *dev, u8 req, u16 reg,
 | |
| 			  char *buf, int len)
 | |
| {
 | |
| 	u8 val = 0;
 | |
| 	int ret;
 | |
| 	int pipe = usb_rcvctrlpipe(dev->udev, 0);
 | |
| 
 | |
| 	if (dev->state & DEV_DISCONNECTED)
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	if (len > URB_MAX_CTRL_SIZE)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	switch (len) {
 | |
| 	case 1:
 | |
| 		val = ENABLE_ONE_BYTE;
 | |
| 		break;
 | |
| 	case 2:
 | |
| 		val = ENABLE_TWE_BYTE;
 | |
| 		break;
 | |
| 	case 3:
 | |
| 		val = ENABLE_THREE_BYTE;
 | |
| 		break;
 | |
| 	case 4:
 | |
| 		val = ENABLE_FOUR_BYTE;
 | |
| 		break;
 | |
| 	default:
 | |
| 		val = 0xFF;	/* invalid option */
 | |
| 	}
 | |
| 
 | |
| 	if (val == 0xFF)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	ret = __usb_control_msg(dev, pipe, req,
 | |
| 			      USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 | |
| 			      val, reg, buf, len, HZ);
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| int cx231xx_send_vendor_cmd(struct cx231xx *dev,
 | |
| 				struct VENDOR_REQUEST_IN *ven_req)
 | |
| {
 | |
| 	int ret;
 | |
| 	int pipe = 0;
 | |
| 	int unsend_size = 0;
 | |
| 	u8 *pdata;
 | |
| 
 | |
| 	if (dev->state & DEV_DISCONNECTED)
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	if ((ven_req->wLength > URB_MAX_CTRL_SIZE))
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	if (ven_req->direction)
 | |
| 		pipe = usb_rcvctrlpipe(dev->udev, 0);
 | |
| 	else
 | |
| 		pipe = usb_sndctrlpipe(dev->udev, 0);
 | |
| 
 | |
| 	/*
 | |
| 	 * If the cx23102 read more than 4 bytes with i2c bus,
 | |
| 	 * need chop to 4 byte per request
 | |
| 	 */
 | |
| 	if ((ven_req->wLength > 4) && ((ven_req->bRequest == 0x4) ||
 | |
| 					(ven_req->bRequest == 0x5) ||
 | |
| 					(ven_req->bRequest == 0x6))) {
 | |
| 		unsend_size = 0;
 | |
| 		pdata = ven_req->pBuff;
 | |
| 
 | |
| 
 | |
| 		unsend_size = ven_req->wLength;
 | |
| 
 | |
| 		/* the first package */
 | |
| 		ven_req->wValue = ven_req->wValue & 0xFFFB;
 | |
| 		ven_req->wValue = (ven_req->wValue & 0xFFBD) | 0x2;
 | |
| 		ret = __usb_control_msg(dev, pipe, ven_req->bRequest,
 | |
| 			ven_req->direction | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 | |
| 			ven_req->wValue, ven_req->wIndex, pdata,
 | |
| 			0x0004, HZ);
 | |
| 		unsend_size = unsend_size - 4;
 | |
| 
 | |
| 		/* the middle package */
 | |
| 		ven_req->wValue = (ven_req->wValue & 0xFFBD) | 0x42;
 | |
| 		while (unsend_size - 4 > 0) {
 | |
| 			pdata = pdata + 4;
 | |
| 			ret = __usb_control_msg(dev, pipe,
 | |
| 				ven_req->bRequest,
 | |
| 				ven_req->direction | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 | |
| 				ven_req->wValue, ven_req->wIndex, pdata,
 | |
| 				0x0004, HZ);
 | |
| 			unsend_size = unsend_size - 4;
 | |
| 		}
 | |
| 
 | |
| 		/* the last package */
 | |
| 		ven_req->wValue = (ven_req->wValue & 0xFFBD) | 0x40;
 | |
| 		pdata = pdata + 4;
 | |
| 		ret = __usb_control_msg(dev, pipe, ven_req->bRequest,
 | |
| 			ven_req->direction | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 | |
| 			ven_req->wValue, ven_req->wIndex, pdata,
 | |
| 			unsend_size, HZ);
 | |
| 	} else {
 | |
| 		ret = __usb_control_msg(dev, pipe, ven_req->bRequest,
 | |
| 				ven_req->direction | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 | |
| 				ven_req->wValue, ven_req->wIndex,
 | |
| 				ven_req->pBuff, ven_req->wLength, HZ);
 | |
| 	}
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * cx231xx_write_ctrl_reg()
 | |
|  * sends data to the usb device, specifying bRequest
 | |
|  */
 | |
| int cx231xx_write_ctrl_reg(struct cx231xx *dev, u8 req, u16 reg, char *buf,
 | |
| 			   int len)
 | |
| {
 | |
| 	u8 val = 0;
 | |
| 	int ret;
 | |
| 	int pipe = usb_sndctrlpipe(dev->udev, 0);
 | |
| 
 | |
| 	if (dev->state & DEV_DISCONNECTED)
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	if ((len < 1) || (len > URB_MAX_CTRL_SIZE))
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	switch (len) {
 | |
| 	case 1:
 | |
| 		val = ENABLE_ONE_BYTE;
 | |
| 		break;
 | |
| 	case 2:
 | |
| 		val = ENABLE_TWE_BYTE;
 | |
| 		break;
 | |
| 	case 3:
 | |
| 		val = ENABLE_THREE_BYTE;
 | |
| 		break;
 | |
| 	case 4:
 | |
| 		val = ENABLE_FOUR_BYTE;
 | |
| 		break;
 | |
| 	default:
 | |
| 		val = 0xFF;	/* invalid option */
 | |
| 	}
 | |
| 
 | |
| 	if (val == 0xFF)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	if (reg_debug) {
 | |
| 		int byte;
 | |
| 
 | |
| 		cx231xx_isocdbg("(pipe 0x%08x): "
 | |
| 			"OUT: %02x %02x %02x %02x %02x %02x %02x %02x >>>",
 | |
| 			pipe,
 | |
| 			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 | |
| 			req, 0, val, reg & 0xff,
 | |
| 			reg >> 8, len & 0xff, len >> 8);
 | |
| 
 | |
| 		for (byte = 0; byte < len; byte++)
 | |
| 			cx231xx_isocdbg(" %02x", (unsigned char)buf[byte]);
 | |
| 		cx231xx_isocdbg("\n");
 | |
| 	}
 | |
| 
 | |
| 	ret = __usb_control_msg(dev, pipe, req,
 | |
| 			      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 | |
| 			      val, reg, buf, len, HZ);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| /****************************************************************
 | |
| *           USB Alternate Setting functions                     *
 | |
| *****************************************************************/
 | |
| 
 | |
| int cx231xx_set_video_alternate(struct cx231xx *dev)
 | |
| {
 | |
| 	int errCode, prev_alt = dev->video_mode.alt;
 | |
| 	unsigned int min_pkt_size = dev->width * 2 + 4;
 | |
| 	u32 usb_interface_index = 0;
 | |
| 
 | |
| 	/* When image size is bigger than a certain value,
 | |
| 	   the frame size should be increased, otherwise, only
 | |
| 	   green screen will be received.
 | |
| 	 */
 | |
| 	if (dev->width * 2 * dev->height > 720 * 240 * 2)
 | |
| 		min_pkt_size *= 2;
 | |
| 
 | |
| 	if (dev->width > 360) {
 | |
| 		/* resolutions: 720,704,640 */
 | |
| 		dev->video_mode.alt = 3;
 | |
| 	} else if (dev->width > 180) {
 | |
| 		/* resolutions: 360,352,320,240 */
 | |
| 		dev->video_mode.alt = 2;
 | |
| 	} else if (dev->width > 0) {
 | |
| 		/* resolutions: 180,176,160,128,88 */
 | |
| 		dev->video_mode.alt = 1;
 | |
| 	} else {
 | |
| 		/* Change to alt0 BULK to release USB bandwidth */
 | |
| 		dev->video_mode.alt = 0;
 | |
| 	}
 | |
| 
 | |
| 	if (dev->USE_ISO == 0)
 | |
| 		dev->video_mode.alt = 0;
 | |
| 
 | |
| 	cx231xx_coredbg("dev->video_mode.alt= %d\n", dev->video_mode.alt);
 | |
| 
 | |
| 	/* Get the correct video interface Index */
 | |
| 	usb_interface_index =
 | |
| 	    dev->current_pcb_config.hs_config_info[0].interface_info.
 | |
| 	    video_index + 1;
 | |
| 
 | |
| 	if (dev->video_mode.alt != prev_alt) {
 | |
| 		cx231xx_coredbg("minimum isoc packet size: %u (alt=%d)\n",
 | |
| 				min_pkt_size, dev->video_mode.alt);
 | |
| 
 | |
| 		if (dev->video_mode.alt_max_pkt_size != NULL)
 | |
| 			dev->video_mode.max_pkt_size =
 | |
| 			dev->video_mode.alt_max_pkt_size[dev->video_mode.alt];
 | |
| 		cx231xx_coredbg("setting alternate %d with wMaxPacketSize=%u\n",
 | |
| 				dev->video_mode.alt,
 | |
| 				dev->video_mode.max_pkt_size);
 | |
| 		errCode =
 | |
| 		    usb_set_interface(dev->udev, usb_interface_index,
 | |
| 				      dev->video_mode.alt);
 | |
| 		if (errCode < 0) {
 | |
| 			cx231xx_errdev
 | |
| 			    ("cannot change alt number to %d (error=%i)\n",
 | |
| 			     dev->video_mode.alt, errCode);
 | |
| 			return errCode;
 | |
| 		}
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| int cx231xx_set_alt_setting(struct cx231xx *dev, u8 index, u8 alt)
 | |
| {
 | |
| 	int status = 0;
 | |
| 	u32 usb_interface_index = 0;
 | |
| 	u32 max_pkt_size = 0;
 | |
| 
 | |
| 	switch (index) {
 | |
| 	case INDEX_TS1:
 | |
| 		usb_interface_index =
 | |
| 		    dev->current_pcb_config.hs_config_info[0].interface_info.
 | |
| 		    ts1_index + 1;
 | |
| 		dev->ts1_mode.alt = alt;
 | |
| 		if (dev->ts1_mode.alt_max_pkt_size != NULL)
 | |
| 			max_pkt_size = dev->ts1_mode.max_pkt_size =
 | |
| 			    dev->ts1_mode.alt_max_pkt_size[dev->ts1_mode.alt];
 | |
| 		break;
 | |
| 	case INDEX_TS2:
 | |
| 		usb_interface_index =
 | |
| 		    dev->current_pcb_config.hs_config_info[0].interface_info.
 | |
| 		    ts2_index + 1;
 | |
| 		break;
 | |
| 	case INDEX_AUDIO:
 | |
| 		usb_interface_index =
 | |
| 		    dev->current_pcb_config.hs_config_info[0].interface_info.
 | |
| 		    audio_index + 1;
 | |
| 		dev->adev.alt = alt;
 | |
| 		if (dev->adev.alt_max_pkt_size != NULL)
 | |
| 			max_pkt_size = dev->adev.max_pkt_size =
 | |
| 			    dev->adev.alt_max_pkt_size[dev->adev.alt];
 | |
| 		break;
 | |
| 	case INDEX_VIDEO:
 | |
| 		usb_interface_index =
 | |
| 		    dev->current_pcb_config.hs_config_info[0].interface_info.
 | |
| 		    video_index + 1;
 | |
| 		dev->video_mode.alt = alt;
 | |
| 		if (dev->video_mode.alt_max_pkt_size != NULL)
 | |
| 			max_pkt_size = dev->video_mode.max_pkt_size =
 | |
| 			    dev->video_mode.alt_max_pkt_size[dev->video_mode.
 | |
| 							     alt];
 | |
| 		break;
 | |
| 	case INDEX_VANC:
 | |
| 		if (dev->board.no_alt_vanc)
 | |
| 			return 0;
 | |
| 		usb_interface_index =
 | |
| 		    dev->current_pcb_config.hs_config_info[0].interface_info.
 | |
| 		    vanc_index + 1;
 | |
| 		dev->vbi_mode.alt = alt;
 | |
| 		if (dev->vbi_mode.alt_max_pkt_size != NULL)
 | |
| 			max_pkt_size = dev->vbi_mode.max_pkt_size =
 | |
| 			    dev->vbi_mode.alt_max_pkt_size[dev->vbi_mode.alt];
 | |
| 		break;
 | |
| 	case INDEX_HANC:
 | |
| 		usb_interface_index =
 | |
| 		    dev->current_pcb_config.hs_config_info[0].interface_info.
 | |
| 		    hanc_index + 1;
 | |
| 		dev->sliced_cc_mode.alt = alt;
 | |
| 		if (dev->sliced_cc_mode.alt_max_pkt_size != NULL)
 | |
| 			max_pkt_size = dev->sliced_cc_mode.max_pkt_size =
 | |
| 			    dev->sliced_cc_mode.alt_max_pkt_size[dev->
 | |
| 								 sliced_cc_mode.
 | |
| 								 alt];
 | |
| 		break;
 | |
| 	default:
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	if (alt > 0 && max_pkt_size == 0) {
 | |
| 		cx231xx_errdev
 | |
| 		("can't change interface %d alt no. to %d: Max. Pkt size = 0\n",
 | |
| 		usb_interface_index, alt);
 | |
| 		/*To workaround error number=-71 on EP0 for videograbber,
 | |
| 		 need add following codes.*/
 | |
| 		if (dev->board.no_alt_vanc)
 | |
| 			return -1;
 | |
| 	}
 | |
| 
 | |
| 	cx231xx_coredbg("setting alternate %d with wMaxPacketSize=%u,"
 | |
| 			"Interface = %d\n", alt, max_pkt_size,
 | |
| 			usb_interface_index);
 | |
| 
 | |
| 	if (usb_interface_index > 0) {
 | |
| 		status = usb_set_interface(dev->udev, usb_interface_index, alt);
 | |
| 		if (status < 0) {
 | |
| 			cx231xx_errdev
 | |
| 			("can't change interface %d alt no. to %d (err=%i)\n",
 | |
| 			usb_interface_index, alt, status);
 | |
| 			return status;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	return status;
 | |
| }
 | |
| EXPORT_SYMBOL_GPL(cx231xx_set_alt_setting);
 | |
| 
 | |
| int cx231xx_gpio_set(struct cx231xx *dev, struct cx231xx_reg_seq *gpio)
 | |
| {
 | |
| 	int rc = 0;
 | |
| 
 | |
| 	if (!gpio)
 | |
| 		return rc;
 | |
| 
 | |
| 	/* Send GPIO reset sequences specified at board entry */
 | |
| 	while (gpio->sleep >= 0) {
 | |
| 		rc = cx231xx_set_gpio_value(dev, gpio->bit, gpio->val);
 | |
| 		if (rc < 0)
 | |
| 			return rc;
 | |
| 
 | |
| 		if (gpio->sleep > 0)
 | |
| 			msleep(gpio->sleep);
 | |
| 
 | |
| 		gpio++;
 | |
| 	}
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| int cx231xx_demod_reset(struct cx231xx *dev)
 | |
| {
 | |
| 
 | |
| 	u8 status = 0;
 | |
| 	u8 value[4] = { 0, 0, 0, 0 };
 | |
| 
 | |
| 	status = cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, PWR_CTL_EN,
 | |
| 				 value, 4);
 | |
| 
 | |
| 	cx231xx_coredbg("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", PWR_CTL_EN,
 | |
| 			value[0], value[1], value[2], value[3]);
 | |
| 
 | |
| 	cx231xx_coredbg("Enter cx231xx_demod_reset()\n");
 | |
| 
 | |
| 		value[1] = (u8) 0x3;
 | |
| 		status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
 | |
| 						PWR_CTL_EN, value, 4);
 | |
| 			msleep(10);
 | |
| 
 | |
| 		value[1] = (u8) 0x0;
 | |
| 		status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
 | |
| 						PWR_CTL_EN, value, 4);
 | |
| 			msleep(10);
 | |
| 
 | |
| 		value[1] = (u8) 0x3;
 | |
| 		status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
 | |
| 						PWR_CTL_EN, value, 4);
 | |
| 			msleep(10);
 | |
| 
 | |
| 
 | |
| 
 | |
| 	status = cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, PWR_CTL_EN,
 | |
| 				 value, 4);
 | |
| 
 | |
| 	cx231xx_coredbg("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", PWR_CTL_EN,
 | |
| 			value[0], value[1], value[2], value[3]);
 | |
| 
 | |
| 	return status;
 | |
| }
 | |
| EXPORT_SYMBOL_GPL(cx231xx_demod_reset);
 | |
| int is_fw_load(struct cx231xx *dev)
 | |
| {
 | |
| 	return cx231xx_check_fw(dev);
 | |
| }
 | |
| EXPORT_SYMBOL_GPL(is_fw_load);
 | |
| 
 | |
| int cx231xx_set_mode(struct cx231xx *dev, enum cx231xx_mode set_mode)
 | |
| {
 | |
| 	int errCode = 0;
 | |
| 
 | |
| 	if (dev->mode == set_mode)
 | |
| 		return 0;
 | |
| 
 | |
| 	if (set_mode == CX231XX_SUSPEND) {
 | |
| 		/* Set the chip in power saving mode */
 | |
| 		dev->mode = set_mode;
 | |
| 	}
 | |
| 
 | |
| 	/* Resource is locked */
 | |
| 	if (dev->mode != CX231XX_SUSPEND)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	dev->mode = set_mode;
 | |
| 
 | |
| 	if (dev->mode == CX231XX_DIGITAL_MODE)/* Set Digital power mode */ {
 | |
| 	/* set AGC mode to Digital */
 | |
| 		switch (dev->model) {
 | |
| 		case CX231XX_BOARD_CNXT_CARRAERA:
 | |
| 		case CX231XX_BOARD_CNXT_RDE_250:
 | |
| 		case CX231XX_BOARD_CNXT_SHELBY:
 | |
| 		case CX231XX_BOARD_CNXT_RDU_250:
 | |
| 		errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 0);
 | |
| 			break;
 | |
| 		case CX231XX_BOARD_CNXT_RDE_253S:
 | |
| 		case CX231XX_BOARD_CNXT_RDU_253S:
 | |
| 			errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 1);
 | |
| 			break;
 | |
| 		case CX231XX_BOARD_HAUPPAUGE_EXETER:
 | |
| 			errCode = cx231xx_set_power_mode(dev,
 | |
| 						POLARIS_AVMODE_DIGITAL);
 | |
| 			break;
 | |
| 		default:
 | |
| 			break;
 | |
| 		}
 | |
| 	} else/* Set Analog Power mode */ {
 | |
| 	/* set AGC mode to Analog */
 | |
| 		switch (dev->model) {
 | |
| 		case CX231XX_BOARD_CNXT_CARRAERA:
 | |
| 		case CX231XX_BOARD_CNXT_RDE_250:
 | |
| 		case CX231XX_BOARD_CNXT_SHELBY:
 | |
| 		case CX231XX_BOARD_CNXT_RDU_250:
 | |
| 		errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 1);
 | |
| 			break;
 | |
| 		case CX231XX_BOARD_CNXT_RDE_253S:
 | |
| 		case CX231XX_BOARD_CNXT_RDU_253S:
 | |
| 		case CX231XX_BOARD_HAUPPAUGE_EXETER:
 | |
| 		case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID:
 | |
| 		case CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL:
 | |
| 		case CX231XX_BOARD_HAUPPAUGE_USB2_FM_NTSC:
 | |
| 		errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 0);
 | |
| 			break;
 | |
| 		default:
 | |
| 			break;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	return errCode ? -EINVAL : 0;
 | |
| }
 | |
| EXPORT_SYMBOL_GPL(cx231xx_set_mode);
 | |
| 
 | |
| int cx231xx_ep5_bulkout(struct cx231xx *dev, u8 *firmware, u16 size)
 | |
| {
 | |
| 	int errCode = 0;
 | |
| 	int actlen, ret = -ENOMEM;
 | |
| 	u32 *buffer;
 | |
| 
 | |
| 	buffer = kzalloc(4096, GFP_KERNEL);
 | |
| 	if (buffer == NULL) {
 | |
| 		cx231xx_info("out of mem\n");
 | |
| 		return -ENOMEM;
 | |
| 	}
 | |
| 	memcpy(&buffer[0], firmware, 4096);
 | |
| 
 | |
| 	ret = usb_bulk_msg(dev->udev, usb_sndbulkpipe(dev->udev, 5),
 | |
| 			buffer, 4096, &actlen, 2000);
 | |
| 
 | |
| 	if (ret)
 | |
| 		cx231xx_info("bulk message failed: %d (%d/%d)", ret,
 | |
| 				size, actlen);
 | |
| 	else {
 | |
| 		errCode = actlen != size ? -1 : 0;
 | |
| 	}
 | |
| 	kfree(buffer);
 | |
| 	return errCode;
 | |
| }
 | |
| 
 | |
| /*****************************************************************
 | |
| *                URB Streaming functions                         *
 | |
| ******************************************************************/
 | |
| 
 | |
| /*
 | |
|  * IRQ callback, called by URB callback
 | |
|  */
 | |
| static void cx231xx_isoc_irq_callback(struct urb *urb)
 | |
| {
 | |
| 	struct cx231xx_dmaqueue *dma_q = urb->context;
 | |
| 	struct cx231xx_video_mode *vmode =
 | |
| 	    container_of(dma_q, struct cx231xx_video_mode, vidq);
 | |
| 	struct cx231xx *dev = container_of(vmode, struct cx231xx, video_mode);
 | |
| 	int i;
 | |
| 
 | |
| 	switch (urb->status) {
 | |
| 	case 0:		/* success */
 | |
| 	case -ETIMEDOUT:	/* NAK */
 | |
| 		break;
 | |
| 	case -ECONNRESET:	/* kill */
 | |
| 	case -ENOENT:
 | |
| 	case -ESHUTDOWN:
 | |
| 		return;
 | |
| 	default:		/* error */
 | |
| 		cx231xx_isocdbg("urb completition error %d.\n", urb->status);
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	/* Copy data from URB */
 | |
| 	spin_lock(&dev->video_mode.slock);
 | |
| 	dev->video_mode.isoc_ctl.isoc_copy(dev, urb);
 | |
| 	spin_unlock(&dev->video_mode.slock);
 | |
| 
 | |
| 	/* Reset urb buffers */
 | |
| 	for (i = 0; i < urb->number_of_packets; i++) {
 | |
| 		urb->iso_frame_desc[i].status = 0;
 | |
| 		urb->iso_frame_desc[i].actual_length = 0;
 | |
| 	}
 | |
| 
 | |
| 	urb->status = usb_submit_urb(urb, GFP_ATOMIC);
 | |
| 	if (urb->status) {
 | |
| 		cx231xx_isocdbg("urb resubmit failed (error=%i)\n",
 | |
| 				urb->status);
 | |
| 	}
 | |
| }
 | |
| /*****************************************************************
 | |
| *                URB Streaming functions                         *
 | |
| ******************************************************************/
 | |
| 
 | |
| /*
 | |
|  * IRQ callback, called by URB callback
 | |
|  */
 | |
| static void cx231xx_bulk_irq_callback(struct urb *urb)
 | |
| {
 | |
| 	struct cx231xx_dmaqueue *dma_q = urb->context;
 | |
| 	struct cx231xx_video_mode *vmode =
 | |
| 	    container_of(dma_q, struct cx231xx_video_mode, vidq);
 | |
| 	struct cx231xx *dev = container_of(vmode, struct cx231xx, video_mode);
 | |
| 
 | |
| 	switch (urb->status) {
 | |
| 	case 0:		/* success */
 | |
| 	case -ETIMEDOUT:	/* NAK */
 | |
| 		break;
 | |
| 	case -ECONNRESET:	/* kill */
 | |
| 	case -ENOENT:
 | |
| 	case -ESHUTDOWN:
 | |
| 		return;
 | |
| 	default:		/* error */
 | |
| 		cx231xx_isocdbg("urb completition error %d.\n", urb->status);
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	/* Copy data from URB */
 | |
| 	spin_lock(&dev->video_mode.slock);
 | |
| 	dev->video_mode.bulk_ctl.bulk_copy(dev, urb);
 | |
| 	spin_unlock(&dev->video_mode.slock);
 | |
| 
 | |
| 	/* Reset urb buffers */
 | |
| 	urb->status = usb_submit_urb(urb, GFP_ATOMIC);
 | |
| 	if (urb->status) {
 | |
| 		cx231xx_isocdbg("urb resubmit failed (error=%i)\n",
 | |
| 				urb->status);
 | |
| 	}
 | |
| }
 | |
| /*
 | |
|  * Stop and Deallocate URBs
 | |
|  */
 | |
| void cx231xx_uninit_isoc(struct cx231xx *dev)
 | |
| {
 | |
| 	struct cx231xx_dmaqueue *dma_q = &dev->video_mode.vidq;
 | |
| 	struct urb *urb;
 | |
| 	int i;
 | |
| 
 | |
| 	cx231xx_isocdbg("cx231xx: called cx231xx_uninit_isoc\n");
 | |
| 
 | |
| 	dev->video_mode.isoc_ctl.nfields = -1;
 | |
| 	for (i = 0; i < dev->video_mode.isoc_ctl.num_bufs; i++) {
 | |
| 		urb = dev->video_mode.isoc_ctl.urb[i];
 | |
| 		if (urb) {
 | |
| 			if (!irqs_disabled())
 | |
| 				usb_kill_urb(urb);
 | |
| 			else
 | |
| 				usb_unlink_urb(urb);
 | |
| 
 | |
| 			if (dev->video_mode.isoc_ctl.transfer_buffer[i]) {
 | |
| 				usb_free_coherent(dev->udev,
 | |
| 						  urb->transfer_buffer_length,
 | |
| 						  dev->video_mode.isoc_ctl.
 | |
| 						  transfer_buffer[i],
 | |
| 						  urb->transfer_dma);
 | |
| 			}
 | |
| 			usb_free_urb(urb);
 | |
| 			dev->video_mode.isoc_ctl.urb[i] = NULL;
 | |
| 		}
 | |
| 		dev->video_mode.isoc_ctl.transfer_buffer[i] = NULL;
 | |
| 	}
 | |
| 
 | |
| 	kfree(dev->video_mode.isoc_ctl.urb);
 | |
| 	kfree(dev->video_mode.isoc_ctl.transfer_buffer);
 | |
| 	kfree(dma_q->p_left_data);
 | |
| 
 | |
| 	dev->video_mode.isoc_ctl.urb = NULL;
 | |
| 	dev->video_mode.isoc_ctl.transfer_buffer = NULL;
 | |
| 	dev->video_mode.isoc_ctl.num_bufs = 0;
 | |
| 	dma_q->p_left_data = NULL;
 | |
| 
 | |
| 	if (dev->mode_tv == 0)
 | |
| 		cx231xx_capture_start(dev, 0, Raw_Video);
 | |
| 	else
 | |
| 		cx231xx_capture_start(dev, 0, TS1_serial_mode);
 | |
| 
 | |
| 
 | |
| }
 | |
| EXPORT_SYMBOL_GPL(cx231xx_uninit_isoc);
 | |
| 
 | |
| /*
 | |
|  * Stop and Deallocate URBs
 | |
|  */
 | |
| void cx231xx_uninit_bulk(struct cx231xx *dev)
 | |
| {
 | |
| 	struct urb *urb;
 | |
| 	int i;
 | |
| 
 | |
| 	cx231xx_isocdbg("cx231xx: called cx231xx_uninit_bulk\n");
 | |
| 
 | |
| 	dev->video_mode.bulk_ctl.nfields = -1;
 | |
| 	for (i = 0; i < dev->video_mode.bulk_ctl.num_bufs; i++) {
 | |
| 		urb = dev->video_mode.bulk_ctl.urb[i];
 | |
| 		if (urb) {
 | |
| 			if (!irqs_disabled())
 | |
| 				usb_kill_urb(urb);
 | |
| 			else
 | |
| 				usb_unlink_urb(urb);
 | |
| 
 | |
| 			if (dev->video_mode.bulk_ctl.transfer_buffer[i]) {
 | |
| 				usb_free_coherent(dev->udev,
 | |
| 						urb->transfer_buffer_length,
 | |
| 						dev->video_mode.isoc_ctl.
 | |
| 						transfer_buffer[i],
 | |
| 						urb->transfer_dma);
 | |
| 			}
 | |
| 			usb_free_urb(urb);
 | |
| 			dev->video_mode.bulk_ctl.urb[i] = NULL;
 | |
| 		}
 | |
| 		dev->video_mode.bulk_ctl.transfer_buffer[i] = NULL;
 | |
| 	}
 | |
| 
 | |
| 	kfree(dev->video_mode.bulk_ctl.urb);
 | |
| 	kfree(dev->video_mode.bulk_ctl.transfer_buffer);
 | |
| 
 | |
| 	dev->video_mode.bulk_ctl.urb = NULL;
 | |
| 	dev->video_mode.bulk_ctl.transfer_buffer = NULL;
 | |
| 	dev->video_mode.bulk_ctl.num_bufs = 0;
 | |
| 
 | |
| 	if (dev->mode_tv == 0)
 | |
| 		cx231xx_capture_start(dev, 0, Raw_Video);
 | |
| 	else
 | |
| 		cx231xx_capture_start(dev, 0, TS1_serial_mode);
 | |
| 
 | |
| 
 | |
| }
 | |
| EXPORT_SYMBOL_GPL(cx231xx_uninit_bulk);
 | |
| 
 | |
| /*
 | |
|  * Allocate URBs and start IRQ
 | |
|  */
 | |
| int cx231xx_init_isoc(struct cx231xx *dev, int max_packets,
 | |
| 		      int num_bufs, int max_pkt_size,
 | |
| 		      int (*isoc_copy) (struct cx231xx *dev, struct urb *urb))
 | |
| {
 | |
| 	struct cx231xx_dmaqueue *dma_q = &dev->video_mode.vidq;
 | |
| 	int i;
 | |
| 	int sb_size, pipe;
 | |
| 	struct urb *urb;
 | |
| 	int j, k;
 | |
| 	int rc;
 | |
| 
 | |
| 	/* De-allocates all pending stuff */
 | |
| 	cx231xx_uninit_isoc(dev);
 | |
| 
 | |
| 	dma_q->p_left_data = kzalloc(4096, GFP_KERNEL);
 | |
| 	if (dma_q->p_left_data == NULL) {
 | |
| 		cx231xx_info("out of mem\n");
 | |
| 		return -ENOMEM;
 | |
| 	}
 | |
| 
 | |
| 
 | |
| 
 | |
| 	dev->video_mode.isoc_ctl.isoc_copy = isoc_copy;
 | |
| 	dev->video_mode.isoc_ctl.num_bufs = num_bufs;
 | |
| 	dma_q->pos = 0;
 | |
| 	dma_q->is_partial_line = 0;
 | |
| 	dma_q->last_sav = 0;
 | |
| 	dma_q->current_field = -1;
 | |
| 	dma_q->field1_done = 0;
 | |
| 	dma_q->lines_per_field = dev->height / 2;
 | |
| 	dma_q->bytes_left_in_line = dev->width << 1;
 | |
| 	dma_q->lines_completed = 0;
 | |
| 	dma_q->mpeg_buffer_done = 0;
 | |
| 	dma_q->left_data_count = 0;
 | |
| 	dma_q->mpeg_buffer_completed = 0;
 | |
| 	dma_q->add_ps_package_head = CX231XX_NEED_ADD_PS_PACKAGE_HEAD;
 | |
| 	dma_q->ps_head[0] = 0x00;
 | |
| 	dma_q->ps_head[1] = 0x00;
 | |
| 	dma_q->ps_head[2] = 0x01;
 | |
| 	dma_q->ps_head[3] = 0xBA;
 | |
| 	for (i = 0; i < 8; i++)
 | |
| 		dma_q->partial_buf[i] = 0;
 | |
| 
 | |
| 	dev->video_mode.isoc_ctl.urb =
 | |
| 	    kzalloc(sizeof(void *) * num_bufs, GFP_KERNEL);
 | |
| 	if (!dev->video_mode.isoc_ctl.urb) {
 | |
| 		cx231xx_errdev("cannot alloc memory for usb buffers\n");
 | |
| 		return -ENOMEM;
 | |
| 	}
 | |
| 
 | |
| 	dev->video_mode.isoc_ctl.transfer_buffer =
 | |
| 	    kzalloc(sizeof(void *) * num_bufs, GFP_KERNEL);
 | |
| 	if (!dev->video_mode.isoc_ctl.transfer_buffer) {
 | |
| 		cx231xx_errdev("cannot allocate memory for usbtransfer\n");
 | |
| 		kfree(dev->video_mode.isoc_ctl.urb);
 | |
| 		return -ENOMEM;
 | |
| 	}
 | |
| 
 | |
| 	dev->video_mode.isoc_ctl.max_pkt_size = max_pkt_size;
 | |
| 	dev->video_mode.isoc_ctl.buf = NULL;
 | |
| 
 | |
| 	sb_size = max_packets * dev->video_mode.isoc_ctl.max_pkt_size;
 | |
| 
 | |
| 	if (dev->mode_tv == 1)
 | |
| 		dev->video_mode.end_point_addr = 0x81;
 | |
| 	else
 | |
| 		dev->video_mode.end_point_addr = 0x84;
 | |
| 
 | |
| 
 | |
| 	/* allocate urbs and transfer buffers */
 | |
| 	for (i = 0; i < dev->video_mode.isoc_ctl.num_bufs; i++) {
 | |
| 		urb = usb_alloc_urb(max_packets, GFP_KERNEL);
 | |
| 		if (!urb) {
 | |
| 			cx231xx_err("cannot alloc isoc_ctl.urb %i\n", i);
 | |
| 			cx231xx_uninit_isoc(dev);
 | |
| 			return -ENOMEM;
 | |
| 		}
 | |
| 		dev->video_mode.isoc_ctl.urb[i] = urb;
 | |
| 
 | |
| 		dev->video_mode.isoc_ctl.transfer_buffer[i] =
 | |
| 		    usb_alloc_coherent(dev->udev, sb_size, GFP_KERNEL,
 | |
| 				       &urb->transfer_dma);
 | |
| 		if (!dev->video_mode.isoc_ctl.transfer_buffer[i]) {
 | |
| 			cx231xx_err("unable to allocate %i bytes for transfer"
 | |
| 				    " buffer %i%s\n",
 | |
| 				    sb_size, i,
 | |
| 				    in_interrupt() ? " while in int" : "");
 | |
| 			cx231xx_uninit_isoc(dev);
 | |
| 			return -ENOMEM;
 | |
| 		}
 | |
| 		memset(dev->video_mode.isoc_ctl.transfer_buffer[i], 0, sb_size);
 | |
| 
 | |
| 		pipe =
 | |
| 		    usb_rcvisocpipe(dev->udev, dev->video_mode.end_point_addr);
 | |
| 
 | |
| 		usb_fill_int_urb(urb, dev->udev, pipe,
 | |
| 				 dev->video_mode.isoc_ctl.transfer_buffer[i],
 | |
| 				 sb_size, cx231xx_isoc_irq_callback, dma_q, 1);
 | |
| 
 | |
| 		urb->number_of_packets = max_packets;
 | |
| 		urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP;
 | |
| 
 | |
| 		k = 0;
 | |
| 		for (j = 0; j < max_packets; j++) {
 | |
| 			urb->iso_frame_desc[j].offset = k;
 | |
| 			urb->iso_frame_desc[j].length =
 | |
| 			    dev->video_mode.isoc_ctl.max_pkt_size;
 | |
| 			k += dev->video_mode.isoc_ctl.max_pkt_size;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	init_waitqueue_head(&dma_q->wq);
 | |
| 
 | |
| 	/* submit urbs and enables IRQ */
 | |
| 	for (i = 0; i < dev->video_mode.isoc_ctl.num_bufs; i++) {
 | |
| 		rc = usb_submit_urb(dev->video_mode.isoc_ctl.urb[i],
 | |
| 				    GFP_ATOMIC);
 | |
| 		if (rc) {
 | |
| 			cx231xx_err("submit of urb %i failed (error=%i)\n", i,
 | |
| 				    rc);
 | |
| 			cx231xx_uninit_isoc(dev);
 | |
| 			return rc;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if (dev->mode_tv == 0)
 | |
| 		cx231xx_capture_start(dev, 1, Raw_Video);
 | |
| 	else
 | |
| 		cx231xx_capture_start(dev, 1, TS1_serial_mode);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| EXPORT_SYMBOL_GPL(cx231xx_init_isoc);
 | |
| 
 | |
| /*
 | |
|  * Allocate URBs and start IRQ
 | |
|  */
 | |
| int cx231xx_init_bulk(struct cx231xx *dev, int max_packets,
 | |
| 		      int num_bufs, int max_pkt_size,
 | |
| 		      int (*bulk_copy) (struct cx231xx *dev, struct urb *urb))
 | |
| {
 | |
| 	struct cx231xx_dmaqueue *dma_q = &dev->video_mode.vidq;
 | |
| 	int i;
 | |
| 	int sb_size, pipe;
 | |
| 	struct urb *urb;
 | |
| 	int rc;
 | |
| 
 | |
| 	dev->video_input = dev->video_input > 2 ? 2 : dev->video_input;
 | |
| 
 | |
| 	cx231xx_coredbg("Setting Video mux to %d\n", dev->video_input);
 | |
| 
 | |
| 	video_mux(dev, dev->video_input);
 | |
| 
 | |
| 	/* De-allocates all pending stuff */
 | |
| 	cx231xx_uninit_bulk(dev);
 | |
| 
 | |
| 	dev->video_mode.bulk_ctl.bulk_copy = bulk_copy;
 | |
| 	dev->video_mode.bulk_ctl.num_bufs = num_bufs;
 | |
| 	dma_q->pos = 0;
 | |
| 	dma_q->is_partial_line = 0;
 | |
| 	dma_q->last_sav = 0;
 | |
| 	dma_q->current_field = -1;
 | |
| 	dma_q->field1_done = 0;
 | |
| 	dma_q->lines_per_field = dev->height / 2;
 | |
| 	dma_q->bytes_left_in_line = dev->width << 1;
 | |
| 	dma_q->lines_completed = 0;
 | |
| 	dma_q->mpeg_buffer_done = 0;
 | |
| 	dma_q->left_data_count = 0;
 | |
| 	dma_q->mpeg_buffer_completed = 0;
 | |
| 	dma_q->ps_head[0] = 0x00;
 | |
| 	dma_q->ps_head[1] = 0x00;
 | |
| 	dma_q->ps_head[2] = 0x01;
 | |
| 	dma_q->ps_head[3] = 0xBA;
 | |
| 	for (i = 0; i < 8; i++)
 | |
| 		dma_q->partial_buf[i] = 0;
 | |
| 
 | |
| 	dev->video_mode.bulk_ctl.urb =
 | |
| 	    kzalloc(sizeof(void *) * num_bufs, GFP_KERNEL);
 | |
| 	if (!dev->video_mode.bulk_ctl.urb) {
 | |
| 		cx231xx_errdev("cannot alloc memory for usb buffers\n");
 | |
| 		return -ENOMEM;
 | |
| 	}
 | |
| 
 | |
| 	dev->video_mode.bulk_ctl.transfer_buffer =
 | |
| 	    kzalloc(sizeof(void *) * num_bufs, GFP_KERNEL);
 | |
| 	if (!dev->video_mode.bulk_ctl.transfer_buffer) {
 | |
| 		cx231xx_errdev("cannot allocate memory for usbtransfer\n");
 | |
| 		kfree(dev->video_mode.bulk_ctl.urb);
 | |
| 		return -ENOMEM;
 | |
| 	}
 | |
| 
 | |
| 	dev->video_mode.bulk_ctl.max_pkt_size = max_pkt_size;
 | |
| 	dev->video_mode.bulk_ctl.buf = NULL;
 | |
| 
 | |
| 	sb_size = max_packets * dev->video_mode.bulk_ctl.max_pkt_size;
 | |
| 
 | |
| 	if (dev->mode_tv == 1)
 | |
| 		dev->video_mode.end_point_addr = 0x81;
 | |
| 	else
 | |
| 		dev->video_mode.end_point_addr = 0x84;
 | |
| 
 | |
| 
 | |
| 	/* allocate urbs and transfer buffers */
 | |
| 	for (i = 0; i < dev->video_mode.bulk_ctl.num_bufs; i++) {
 | |
| 		urb = usb_alloc_urb(0, GFP_KERNEL);
 | |
| 		if (!urb) {
 | |
| 			cx231xx_err("cannot alloc bulk_ctl.urb %i\n", i);
 | |
| 			cx231xx_uninit_bulk(dev);
 | |
| 			return -ENOMEM;
 | |
| 		}
 | |
| 		dev->video_mode.bulk_ctl.urb[i] = urb;
 | |
| 		urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
 | |
| 
 | |
| 		dev->video_mode.bulk_ctl.transfer_buffer[i] =
 | |
| 		    usb_alloc_coherent(dev->udev, sb_size, GFP_KERNEL,
 | |
| 				     &urb->transfer_dma);
 | |
| 		if (!dev->video_mode.bulk_ctl.transfer_buffer[i]) {
 | |
| 			cx231xx_err("unable to allocate %i bytes for transfer"
 | |
| 				    " buffer %i%s\n",
 | |
| 				    sb_size, i,
 | |
| 				    in_interrupt() ? " while in int" : "");
 | |
| 			cx231xx_uninit_bulk(dev);
 | |
| 			return -ENOMEM;
 | |
| 		}
 | |
| 		memset(dev->video_mode.bulk_ctl.transfer_buffer[i], 0, sb_size);
 | |
| 
 | |
| 		pipe = usb_rcvbulkpipe(dev->udev,
 | |
| 				 dev->video_mode.end_point_addr);
 | |
| 		usb_fill_bulk_urb(urb, dev->udev, pipe,
 | |
| 				  dev->video_mode.bulk_ctl.transfer_buffer[i],
 | |
| 				  sb_size, cx231xx_bulk_irq_callback, dma_q);
 | |
| 	}
 | |
| 
 | |
| 	init_waitqueue_head(&dma_q->wq);
 | |
| 
 | |
| 	/* submit urbs and enables IRQ */
 | |
| 	for (i = 0; i < dev->video_mode.bulk_ctl.num_bufs; i++) {
 | |
| 		rc = usb_submit_urb(dev->video_mode.bulk_ctl.urb[i],
 | |
| 				    GFP_ATOMIC);
 | |
| 		if (rc) {
 | |
| 			cx231xx_err("submit of urb %i failed (error=%i)\n", i,
 | |
| 				    rc);
 | |
| 			cx231xx_uninit_bulk(dev);
 | |
| 			return rc;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if (dev->mode_tv == 0)
 | |
| 		cx231xx_capture_start(dev, 1, Raw_Video);
 | |
| 	else
 | |
| 		cx231xx_capture_start(dev, 1, TS1_serial_mode);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| EXPORT_SYMBOL_GPL(cx231xx_init_bulk);
 | |
| void cx231xx_stop_TS1(struct cx231xx *dev)
 | |
| {
 | |
| 	u8 val[4] = { 0, 0, 0, 0 };
 | |
| 
 | |
| 	val[0] = 0x00;
 | |
| 	val[1] = 0x03;
 | |
| 	val[2] = 0x00;
 | |
| 	val[3] = 0x00;
 | |
| 	cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
 | |
| 			TS_MODE_REG, val, 4);
 | |
| 
 | |
| 	val[0] = 0x00;
 | |
| 	val[1] = 0x70;
 | |
| 	val[2] = 0x04;
 | |
| 	val[3] = 0x00;
 | |
| 	cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
 | |
| 			TS1_CFG_REG, val, 4);
 | |
| }
 | |
| /* EXPORT_SYMBOL_GPL(cx231xx_stop_TS1); */
 | |
| void cx231xx_start_TS1(struct cx231xx *dev)
 | |
| {
 | |
| 	u8 val[4] = { 0, 0, 0, 0 };
 | |
| 
 | |
| 	val[0] = 0x03;
 | |
| 	val[1] = 0x03;
 | |
| 	val[2] = 0x00;
 | |
| 	val[3] = 0x00;
 | |
| 	cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
 | |
| 			TS_MODE_REG, val, 4);
 | |
| 
 | |
| 	val[0] = 0x04;
 | |
| 	val[1] = 0xA3;
 | |
| 	val[2] = 0x3B;
 | |
| 	val[3] = 0x00;
 | |
| 	cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
 | |
| 			TS1_CFG_REG, val, 4);
 | |
| }
 | |
| /* EXPORT_SYMBOL_GPL(cx231xx_start_TS1); */
 | |
| /*****************************************************************
 | |
| *             Device Init/UnInit functions                       *
 | |
| ******************************************************************/
 | |
| int cx231xx_dev_init(struct cx231xx *dev)
 | |
| {
 | |
| 	int errCode = 0;
 | |
| 
 | |
| 	/* Initialize I2C bus */
 | |
| 
 | |
| 	/* External Master 1 Bus */
 | |
| 	dev->i2c_bus[0].nr = 0;
 | |
| 	dev->i2c_bus[0].dev = dev;
 | |
| 	dev->i2c_bus[0].i2c_period = I2C_SPEED_100K;	/* 100 KHz */
 | |
| 	dev->i2c_bus[0].i2c_nostop = 0;
 | |
| 	dev->i2c_bus[0].i2c_reserve = 0;
 | |
| 
 | |
| 	/* External Master 2 Bus */
 | |
| 	dev->i2c_bus[1].nr = 1;
 | |
| 	dev->i2c_bus[1].dev = dev;
 | |
| 	dev->i2c_bus[1].i2c_period = I2C_SPEED_100K;	/* 100 KHz */
 | |
| 	dev->i2c_bus[1].i2c_nostop = 0;
 | |
| 	dev->i2c_bus[1].i2c_reserve = 0;
 | |
| 
 | |
| 	/* Internal Master 3 Bus */
 | |
| 	dev->i2c_bus[2].nr = 2;
 | |
| 	dev->i2c_bus[2].dev = dev;
 | |
| 	dev->i2c_bus[2].i2c_period = I2C_SPEED_100K;	/* 100kHz */
 | |
| 	dev->i2c_bus[2].i2c_nostop = 0;
 | |
| 	dev->i2c_bus[2].i2c_reserve = 0;
 | |
| 
 | |
| 	/* register I2C buses */
 | |
| 	cx231xx_i2c_register(&dev->i2c_bus[0]);
 | |
| 	cx231xx_i2c_register(&dev->i2c_bus[1]);
 | |
| 	cx231xx_i2c_register(&dev->i2c_bus[2]);
 | |
| 
 | |
| 	/* init hardware */
 | |
| 	/* Note : with out calling set power mode function,
 | |
| 	afe can not be set up correctly */
 | |
| 	if (dev->board.external_av) {
 | |
| 		errCode = cx231xx_set_power_mode(dev,
 | |
| 				 POLARIS_AVMODE_ENXTERNAL_AV);
 | |
| 		if (errCode < 0) {
 | |
| 			cx231xx_errdev
 | |
| 			("%s: Failed to set Power - errCode [%d]!\n",
 | |
| 			__func__, errCode);
 | |
| 			return errCode;
 | |
| 		}
 | |
| 	} else {
 | |
| 		errCode = cx231xx_set_power_mode(dev,
 | |
| 				 POLARIS_AVMODE_ANALOGT_TV);
 | |
| 		if (errCode < 0) {
 | |
| 			cx231xx_errdev
 | |
| 			("%s: Failed to set Power - errCode [%d]!\n",
 | |
| 			__func__, errCode);
 | |
| 			return errCode;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/* reset the Tuner, if it is a Xceive tuner */
 | |
| 	if ((dev->board.tuner_type == TUNER_XC5000) ||
 | |
| 	    (dev->board.tuner_type == TUNER_XC2028))
 | |
| 			cx231xx_gpio_set(dev, dev->board.tuner_gpio);
 | |
| 
 | |
| 	/* initialize Colibri block */
 | |
| 	errCode = cx231xx_afe_init_super_block(dev, 0x23c);
 | |
| 	if (errCode < 0) {
 | |
| 		cx231xx_errdev
 | |
| 		    ("%s: cx231xx_afe init super block - errCode [%d]!\n",
 | |
| 		     __func__, errCode);
 | |
| 		return errCode;
 | |
| 	}
 | |
| 	errCode = cx231xx_afe_init_channels(dev);
 | |
| 	if (errCode < 0) {
 | |
| 		cx231xx_errdev
 | |
| 		    ("%s: cx231xx_afe init channels - errCode [%d]!\n",
 | |
| 		     __func__, errCode);
 | |
| 		return errCode;
 | |
| 	}
 | |
| 
 | |
| 	/* Set DIF in By pass mode */
 | |
| 	errCode = cx231xx_dif_set_standard(dev, DIF_USE_BASEBAND);
 | |
| 	if (errCode < 0) {
 | |
| 		cx231xx_errdev
 | |
| 		    ("%s: cx231xx_dif set to By pass mode - errCode [%d]!\n",
 | |
| 		     __func__, errCode);
 | |
| 		return errCode;
 | |
| 	}
 | |
| 
 | |
| 	/* I2S block related functions */
 | |
| 	errCode = cx231xx_i2s_blk_initialize(dev);
 | |
| 	if (errCode < 0) {
 | |
| 		cx231xx_errdev
 | |
| 		    ("%s: cx231xx_i2s block initialize - errCode [%d]!\n",
 | |
| 		     __func__, errCode);
 | |
| 		return errCode;
 | |
| 	}
 | |
| 
 | |
| 	/* init control pins */
 | |
| 	errCode = cx231xx_init_ctrl_pin_status(dev);
 | |
| 	if (errCode < 0) {
 | |
| 		cx231xx_errdev("%s: cx231xx_init ctrl pins - errCode [%d]!\n",
 | |
| 			       __func__, errCode);
 | |
| 		return errCode;
 | |
| 	}
 | |
| 
 | |
| 	/* set AGC mode to Analog */
 | |
| 	switch (dev->model) {
 | |
| 	case CX231XX_BOARD_CNXT_CARRAERA:
 | |
| 	case CX231XX_BOARD_CNXT_RDE_250:
 | |
| 	case CX231XX_BOARD_CNXT_SHELBY:
 | |
| 	case CX231XX_BOARD_CNXT_RDU_250:
 | |
| 	errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 1);
 | |
| 		break;
 | |
| 	case CX231XX_BOARD_CNXT_RDE_253S:
 | |
| 	case CX231XX_BOARD_CNXT_RDU_253S:
 | |
| 	case CX231XX_BOARD_HAUPPAUGE_EXETER:
 | |
| 	case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID:
 | |
| 	case CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL:
 | |
| 	case CX231XX_BOARD_HAUPPAUGE_USB2_FM_NTSC:
 | |
| 	errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 0);
 | |
| 		break;
 | |
| 	default:
 | |
| 		break;
 | |
| 	}
 | |
| 	if (errCode < 0) {
 | |
| 		cx231xx_errdev
 | |
| 		    ("%s: cx231xx_AGC mode to Analog - errCode [%d]!\n",
 | |
| 		     __func__, errCode);
 | |
| 		return errCode;
 | |
| 	}
 | |
| 
 | |
| 	/* set all alternate settings to zero initially */
 | |
| 	cx231xx_set_alt_setting(dev, INDEX_VIDEO, 0);
 | |
| 	cx231xx_set_alt_setting(dev, INDEX_VANC, 0);
 | |
| 	cx231xx_set_alt_setting(dev, INDEX_HANC, 0);
 | |
| 	if (dev->board.has_dvb)
 | |
| 		cx231xx_set_alt_setting(dev, INDEX_TS1, 0);
 | |
| 
 | |
| 	/* set the I2C master port to 3 on channel 1 */
 | |
| 	errCode = cx231xx_enable_i2c_port_3(dev, true);
 | |
| 
 | |
| 	return errCode;
 | |
| }
 | |
| EXPORT_SYMBOL_GPL(cx231xx_dev_init);
 | |
| 
 | |
| void cx231xx_dev_uninit(struct cx231xx *dev)
 | |
| {
 | |
| 	/* Un Initialize I2C bus */
 | |
| 	cx231xx_i2c_unregister(&dev->i2c_bus[2]);
 | |
| 	cx231xx_i2c_unregister(&dev->i2c_bus[1]);
 | |
| 	cx231xx_i2c_unregister(&dev->i2c_bus[0]);
 | |
| }
 | |
| EXPORT_SYMBOL_GPL(cx231xx_dev_uninit);
 | |
| 
 | |
| /*****************************************************************
 | |
| *              G P I O related functions                         *
 | |
| ******************************************************************/
 | |
| int cx231xx_send_gpio_cmd(struct cx231xx *dev, u32 gpio_bit, u8 *gpio_val,
 | |
| 			  u8 len, u8 request, u8 direction)
 | |
| {
 | |
| 	int status = 0;
 | |
| 	struct VENDOR_REQUEST_IN ven_req;
 | |
| 
 | |
| 	/* Set wValue */
 | |
| 	ven_req.wValue = (u16) (gpio_bit >> 16 & 0xffff);
 | |
| 
 | |
| 	/* set request */
 | |
| 	if (!request) {
 | |
| 		if (direction)
 | |
| 			ven_req.bRequest = VRT_GET_GPIO;	/* 0x8 gpio */
 | |
| 		else
 | |
| 			ven_req.bRequest = VRT_SET_GPIO;	/* 0x9 gpio */
 | |
| 	} else {
 | |
| 		if (direction)
 | |
| 			ven_req.bRequest = VRT_GET_GPIE;	/* 0xa gpie */
 | |
| 		else
 | |
| 			ven_req.bRequest = VRT_SET_GPIE;	/* 0xb gpie */
 | |
| 	}
 | |
| 
 | |
| 	/* set index value */
 | |
| 	ven_req.wIndex = (u16) (gpio_bit & 0xffff);
 | |
| 
 | |
| 	/* set wLength value */
 | |
| 	ven_req.wLength = len;
 | |
| 
 | |
| 	/* set bData value */
 | |
| 	ven_req.bData = 0;
 | |
| 
 | |
| 	/* set the buffer for read / write */
 | |
| 	ven_req.pBuff = gpio_val;
 | |
| 
 | |
| 	/* set the direction */
 | |
| 	if (direction) {
 | |
| 		ven_req.direction = USB_DIR_IN;
 | |
| 		memset(ven_req.pBuff, 0x00, ven_req.wLength);
 | |
| 	} else
 | |
| 		ven_req.direction = USB_DIR_OUT;
 | |
| 
 | |
| 
 | |
| 	/* call common vendor command request */
 | |
| 	status = cx231xx_send_vendor_cmd(dev, &ven_req);
 | |
| 	if (status < 0) {
 | |
| 		cx231xx_info
 | |
| 		    ("UsbInterface::sendCommand, failed with status -%d\n",
 | |
| 		     status);
 | |
| 	}
 | |
| 
 | |
| 	return status;
 | |
| }
 | |
| EXPORT_SYMBOL_GPL(cx231xx_send_gpio_cmd);
 | |
| 
 | |
| /*****************************************************************
 | |
|  *    C O N T R O L - Register R E A D / W R I T E functions     *
 | |
|  *****************************************************************/
 | |
| int cx231xx_mode_register(struct cx231xx *dev, u16 address, u32 mode)
 | |
| {
 | |
| 	u8 value[4] = { 0x0, 0x0, 0x0, 0x0 };
 | |
| 	u32 tmp = 0;
 | |
| 	int status = 0;
 | |
| 
 | |
| 	status =
 | |
| 	    cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, address, value, 4);
 | |
| 	if (status < 0)
 | |
| 		return status;
 | |
| 
 | |
| 	tmp = le32_to_cpu(*((u32 *) value));
 | |
| 	tmp |= mode;
 | |
| 
 | |
| 	value[0] = (u8) tmp;
 | |
| 	value[1] = (u8) (tmp >> 8);
 | |
| 	value[2] = (u8) (tmp >> 16);
 | |
| 	value[3] = (u8) (tmp >> 24);
 | |
| 
 | |
| 	status =
 | |
| 	    cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, address, value, 4);
 | |
| 
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| /*****************************************************************
 | |
|  *            I 2 C Internal C O N T R O L   functions           *
 | |
|  *****************************************************************/
 | |
| int cx231xx_read_i2c_master(struct cx231xx *dev, u8 dev_addr, u16 saddr,
 | |
| 			  u8 saddr_len, u32 *data, u8 data_len, int master)
 | |
| {
 | |
| 	int status = 0;
 | |
| 	struct cx231xx_i2c_xfer_data req_data;
 | |
| 	u8 value[64] = "0";
 | |
| 
 | |
| 	if (saddr_len == 0)
 | |
| 		saddr = 0;
 | |
| 	else if (saddr_len == 1)
 | |
| 		saddr &= 0xff;
 | |
| 
 | |
| 	/* prepare xfer_data struct */
 | |
| 	req_data.dev_addr = dev_addr >> 1;
 | |
| 	req_data.direction = I2C_M_RD;
 | |
| 	req_data.saddr_len = saddr_len;
 | |
| 	req_data.saddr_dat = saddr;
 | |
| 	req_data.buf_size = data_len;
 | |
| 	req_data.p_buffer = (u8 *) value;
 | |
| 
 | |
| 	/* usb send command */
 | |
| 	if (master == 0)
 | |
| 		status = dev->cx231xx_send_usb_command(&dev->i2c_bus[0],
 | |
| 					 &req_data);
 | |
| 	else if (master == 1)
 | |
| 		status = dev->cx231xx_send_usb_command(&dev->i2c_bus[1],
 | |
| 					 &req_data);
 | |
| 	else if (master == 2)
 | |
| 		status = dev->cx231xx_send_usb_command(&dev->i2c_bus[2],
 | |
| 					 &req_data);
 | |
| 
 | |
| 	if (status >= 0) {
 | |
| 		/* Copy the data read back to main buffer */
 | |
| 		if (data_len == 1)
 | |
| 			*data = value[0];
 | |
| 		else if (data_len == 4)
 | |
| 			*data =
 | |
| 			    value[0] | value[1] << 8 | value[2] << 16 | value[3]
 | |
| 			    << 24;
 | |
| 		else if (data_len > 4)
 | |
| 			*data = value[saddr];
 | |
| 	}
 | |
| 
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| int cx231xx_write_i2c_master(struct cx231xx *dev, u8 dev_addr, u16 saddr,
 | |
| 			   u8 saddr_len, u32 data, u8 data_len, int master)
 | |
| {
 | |
| 	int status = 0;
 | |
| 	u8 value[4] = { 0, 0, 0, 0 };
 | |
| 	struct cx231xx_i2c_xfer_data req_data;
 | |
| 
 | |
| 	value[0] = (u8) data;
 | |
| 	value[1] = (u8) (data >> 8);
 | |
| 	value[2] = (u8) (data >> 16);
 | |
| 	value[3] = (u8) (data >> 24);
 | |
| 
 | |
| 	if (saddr_len == 0)
 | |
| 		saddr = 0;
 | |
| 	else if (saddr_len == 1)
 | |
| 		saddr &= 0xff;
 | |
| 
 | |
| 	/* prepare xfer_data struct */
 | |
| 	req_data.dev_addr = dev_addr >> 1;
 | |
| 	req_data.direction = 0;
 | |
| 	req_data.saddr_len = saddr_len;
 | |
| 	req_data.saddr_dat = saddr;
 | |
| 	req_data.buf_size = data_len;
 | |
| 	req_data.p_buffer = value;
 | |
| 
 | |
| 	/* usb send command */
 | |
| 	if (master == 0)
 | |
| 		status = dev->cx231xx_send_usb_command(&dev->i2c_bus[0],
 | |
| 				 &req_data);
 | |
| 	else if (master == 1)
 | |
| 		status = dev->cx231xx_send_usb_command(&dev->i2c_bus[1],
 | |
| 				 &req_data);
 | |
| 	else if (master == 2)
 | |
| 		status = dev->cx231xx_send_usb_command(&dev->i2c_bus[2],
 | |
| 				 &req_data);
 | |
| 
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| int cx231xx_read_i2c_data(struct cx231xx *dev, u8 dev_addr, u16 saddr,
 | |
| 			  u8 saddr_len, u32 *data, u8 data_len)
 | |
| {
 | |
| 	int status = 0;
 | |
| 	struct cx231xx_i2c_xfer_data req_data;
 | |
| 	u8 value[4] = { 0, 0, 0, 0 };
 | |
| 
 | |
| 	if (saddr_len == 0)
 | |
| 		saddr = 0;
 | |
| 	else if (saddr_len == 1)
 | |
| 		saddr &= 0xff;
 | |
| 
 | |
| 	/* prepare xfer_data struct */
 | |
| 	req_data.dev_addr = dev_addr >> 1;
 | |
| 	req_data.direction = I2C_M_RD;
 | |
| 	req_data.saddr_len = saddr_len;
 | |
| 	req_data.saddr_dat = saddr;
 | |
| 	req_data.buf_size = data_len;
 | |
| 	req_data.p_buffer = (u8 *) value;
 | |
| 
 | |
| 	/* usb send command */
 | |
| 	status = dev->cx231xx_send_usb_command(&dev->i2c_bus[0], &req_data);
 | |
| 
 | |
| 	if (status >= 0) {
 | |
| 		/* Copy the data read back to main buffer */
 | |
| 		if (data_len == 1)
 | |
| 			*data = value[0];
 | |
| 		else
 | |
| 			*data =
 | |
| 			    value[0] | value[1] << 8 | value[2] << 16 | value[3]
 | |
| 			    << 24;
 | |
| 	}
 | |
| 
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| int cx231xx_write_i2c_data(struct cx231xx *dev, u8 dev_addr, u16 saddr,
 | |
| 			   u8 saddr_len, u32 data, u8 data_len)
 | |
| {
 | |
| 	int status = 0;
 | |
| 	u8 value[4] = { 0, 0, 0, 0 };
 | |
| 	struct cx231xx_i2c_xfer_data req_data;
 | |
| 
 | |
| 	value[0] = (u8) data;
 | |
| 	value[1] = (u8) (data >> 8);
 | |
| 	value[2] = (u8) (data >> 16);
 | |
| 	value[3] = (u8) (data >> 24);
 | |
| 
 | |
| 	if (saddr_len == 0)
 | |
| 		saddr = 0;
 | |
| 	else if (saddr_len == 1)
 | |
| 		saddr &= 0xff;
 | |
| 
 | |
| 	/* prepare xfer_data struct */
 | |
| 	req_data.dev_addr = dev_addr >> 1;
 | |
| 	req_data.direction = 0;
 | |
| 	req_data.saddr_len = saddr_len;
 | |
| 	req_data.saddr_dat = saddr;
 | |
| 	req_data.buf_size = data_len;
 | |
| 	req_data.p_buffer = value;
 | |
| 
 | |
| 	/* usb send command */
 | |
| 	status = dev->cx231xx_send_usb_command(&dev->i2c_bus[0], &req_data);
 | |
| 
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| int cx231xx_reg_mask_write(struct cx231xx *dev, u8 dev_addr, u8 size,
 | |
| 			   u16 register_address, u8 bit_start, u8 bit_end,
 | |
| 			   u32 value)
 | |
| {
 | |
| 	int status = 0;
 | |
| 	u32 tmp;
 | |
| 	u32 mask = 0;
 | |
| 	int i;
 | |
| 
 | |
| 	if (bit_start > (size - 1) || bit_end > (size - 1))
 | |
| 		return -1;
 | |
| 
 | |
| 	if (size == 8) {
 | |
| 		status =
 | |
| 		    cx231xx_read_i2c_data(dev, dev_addr, register_address, 2,
 | |
| 					  &tmp, 1);
 | |
| 	} else {
 | |
| 		status =
 | |
| 		    cx231xx_read_i2c_data(dev, dev_addr, register_address, 2,
 | |
| 					  &tmp, 4);
 | |
| 	}
 | |
| 
 | |
| 	if (status < 0)
 | |
| 		return status;
 | |
| 
 | |
| 	mask = 1 << bit_end;
 | |
| 	for (i = bit_end; i > bit_start && i > 0; i--)
 | |
| 		mask = mask + (1 << (i - 1));
 | |
| 
 | |
| 	value <<= bit_start;
 | |
| 
 | |
| 	if (size == 8) {
 | |
| 		tmp &= ~mask;
 | |
| 		tmp |= value;
 | |
| 		tmp &= 0xff;
 | |
| 		status =
 | |
| 		    cx231xx_write_i2c_data(dev, dev_addr, register_address, 2,
 | |
| 					   tmp, 1);
 | |
| 	} else {
 | |
| 		tmp &= ~mask;
 | |
| 		tmp |= value;
 | |
| 		status =
 | |
| 		    cx231xx_write_i2c_data(dev, dev_addr, register_address, 2,
 | |
| 					   tmp, 4);
 | |
| 	}
 | |
| 
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| int cx231xx_read_modify_write_i2c_dword(struct cx231xx *dev, u8 dev_addr,
 | |
| 					u16 saddr, u32 mask, u32 value)
 | |
| {
 | |
| 	u32 temp;
 | |
| 	int status = 0;
 | |
| 
 | |
| 	status = cx231xx_read_i2c_data(dev, dev_addr, saddr, 2, &temp, 4);
 | |
| 
 | |
| 	if (status < 0)
 | |
| 		return status;
 | |
| 
 | |
| 	temp &= ~mask;
 | |
| 	temp |= value;
 | |
| 
 | |
| 	status = cx231xx_write_i2c_data(dev, dev_addr, saddr, 2, temp, 4);
 | |
| 
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| u32 cx231xx_set_field(u32 field_mask, u32 data)
 | |
| {
 | |
| 	u32 temp;
 | |
| 
 | |
| 	for (temp = field_mask; (temp & 1) == 0; temp >>= 1)
 | |
| 		data <<= 1;
 | |
| 
 | |
| 	return data;
 | |
| }
 |