 e2619cf78e
			
		
	
	
	e2619cf78e
	
	
	
		
			
			CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
		
			
				
	
	
		
			395 lines
		
	
	
	
		
			9.7 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			395 lines
		
	
	
	
		
			9.7 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * linux/drivers/input/keyboard/omap-keypad.c
 | |
|  *
 | |
|  * OMAP Keypad Driver
 | |
|  *
 | |
|  * Copyright (C) 2003 Nokia Corporation
 | |
|  * Written by Timo Teräs <ext-timo.teras@nokia.com>
 | |
|  *
 | |
|  * Added support for H2 & H3 Keypad
 | |
|  * Copyright (C) 2004 Texas Instruments
 | |
|  *
 | |
|  * This program is free software; you can redistribute it and/or modify
 | |
|  * it under the terms of the GNU General Public License as published by
 | |
|  * the Free Software Foundation; either version 2 of the License, or
 | |
|  * (at your option) any later version.
 | |
|  *
 | |
|  * This program is distributed in the hope that it will be useful,
 | |
|  * but WITHOUT ANY WARRANTY; without even the implied warranty of
 | |
|  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 | |
|  * GNU General Public License for more details.
 | |
|  *
 | |
|  * You should have received a copy of the GNU General Public License
 | |
|  * along with this program; if not, write to the Free Software
 | |
|  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
 | |
|  */
 | |
| 
 | |
| #include <linux/module.h>
 | |
| #include <linux/init.h>
 | |
| #include <linux/interrupt.h>
 | |
| #include <linux/types.h>
 | |
| #include <linux/input.h>
 | |
| #include <linux/kernel.h>
 | |
| #include <linux/delay.h>
 | |
| #include <linux/platform_device.h>
 | |
| #include <linux/mutex.h>
 | |
| #include <linux/errno.h>
 | |
| #include <linux/slab.h>
 | |
| #include <linux/gpio.h>
 | |
| #include <linux/platform_data/gpio-omap.h>
 | |
| #include <linux/platform_data/keypad-omap.h>
 | |
| 
 | |
| #undef NEW_BOARD_LEARNING_MODE
 | |
| 
 | |
| static void omap_kp_tasklet(unsigned long);
 | |
| static void omap_kp_timer(unsigned long);
 | |
| 
 | |
| static unsigned char keypad_state[8];
 | |
| static DEFINE_MUTEX(kp_enable_mutex);
 | |
| static int kp_enable = 1;
 | |
| static int kp_cur_group = -1;
 | |
| 
 | |
| struct omap_kp {
 | |
| 	struct input_dev *input;
 | |
| 	struct timer_list timer;
 | |
| 	int irq;
 | |
| 	unsigned int rows;
 | |
| 	unsigned int cols;
 | |
| 	unsigned long delay;
 | |
| 	unsigned int debounce;
 | |
| 	unsigned short keymap[];
 | |
| };
 | |
| 
 | |
| static DECLARE_TASKLET_DISABLED(kp_tasklet, omap_kp_tasklet, 0);
 | |
| 
 | |
| static unsigned int *row_gpios;
 | |
| static unsigned int *col_gpios;
 | |
| 
 | |
| #ifdef CONFIG_ARCH_OMAP2
 | |
| static void set_col_gpio_val(struct omap_kp *omap_kp, u8 value)
 | |
| {
 | |
| 	int col;
 | |
| 
 | |
| 	for (col = 0; col < omap_kp->cols; col++)
 | |
| 		gpio_set_value(col_gpios[col], value & (1 << col));
 | |
| }
 | |
| 
 | |
| static u8 get_row_gpio_val(struct omap_kp *omap_kp)
 | |
| {
 | |
| 	int row;
 | |
| 	u8 value = 0;
 | |
| 
 | |
| 	for (row = 0; row < omap_kp->rows; row++) {
 | |
| 		if (gpio_get_value(row_gpios[row]))
 | |
| 			value |= (1 << row);
 | |
| 	}
 | |
| 	return value;
 | |
| }
 | |
| #else
 | |
| #define		set_col_gpio_val(x, y)	do {} while (0)
 | |
| #define		get_row_gpio_val(x)	0
 | |
| #endif
 | |
| 
 | |
| static irqreturn_t omap_kp_interrupt(int irq, void *dev_id)
 | |
| {
 | |
| 	/* disable keyboard interrupt and schedule for handling */
 | |
| 	omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
 | |
| 
 | |
| 	tasklet_schedule(&kp_tasklet);
 | |
| 
 | |
| 	return IRQ_HANDLED;
 | |
| }
 | |
| 
 | |
| static void omap_kp_timer(unsigned long data)
 | |
| {
 | |
| 	tasklet_schedule(&kp_tasklet);
 | |
| }
 | |
| 
 | |
| static void omap_kp_scan_keypad(struct omap_kp *omap_kp, unsigned char *state)
 | |
| {
 | |
| 	int col = 0;
 | |
| 
 | |
| 	/* disable keyboard interrupt and schedule for handling */
 | |
| 	omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
 | |
| 
 | |
| 	/* read the keypad status */
 | |
| 	omap_writew(0xff, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC);
 | |
| 	for (col = 0; col < omap_kp->cols; col++) {
 | |
| 		omap_writew(~(1 << col) & 0xff,
 | |
| 			    OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC);
 | |
| 
 | |
| 		udelay(omap_kp->delay);
 | |
| 
 | |
| 		state[col] = ~omap_readw(OMAP1_MPUIO_BASE +
 | |
| 					 OMAP_MPUIO_KBR_LATCH) & 0xff;
 | |
| 	}
 | |
| 	omap_writew(0x00, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC);
 | |
| 	udelay(2);
 | |
| }
 | |
| 
 | |
| static void omap_kp_tasklet(unsigned long data)
 | |
| {
 | |
| 	struct omap_kp *omap_kp_data = (struct omap_kp *) data;
 | |
| 	unsigned short *keycodes = omap_kp_data->input->keycode;
 | |
| 	unsigned int row_shift = get_count_order(omap_kp_data->cols);
 | |
| 	unsigned char new_state[8], changed, key_down = 0;
 | |
| 	int col, row;
 | |
| 	int spurious = 0;
 | |
| 
 | |
| 	/* check for any changes */
 | |
| 	omap_kp_scan_keypad(omap_kp_data, new_state);
 | |
| 
 | |
| 	/* check for changes and print those */
 | |
| 	for (col = 0; col < omap_kp_data->cols; col++) {
 | |
| 		changed = new_state[col] ^ keypad_state[col];
 | |
| 		key_down |= new_state[col];
 | |
| 		if (changed == 0)
 | |
| 			continue;
 | |
| 
 | |
| 		for (row = 0; row < omap_kp_data->rows; row++) {
 | |
| 			int key;
 | |
| 			if (!(changed & (1 << row)))
 | |
| 				continue;
 | |
| #ifdef NEW_BOARD_LEARNING_MODE
 | |
| 			printk(KERN_INFO "omap-keypad: key %d-%d %s\n", col,
 | |
| 			       row, (new_state[col] & (1 << row)) ?
 | |
| 			       "pressed" : "released");
 | |
| #else
 | |
| 			key = keycodes[MATRIX_SCAN_CODE(row, col, row_shift)];
 | |
| 			if (key < 0) {
 | |
| 				printk(KERN_WARNING
 | |
| 				      "omap-keypad: Spurious key event %d-%d\n",
 | |
| 				       col, row);
 | |
| 				/* We scan again after a couple of seconds */
 | |
| 				spurious = 1;
 | |
| 				continue;
 | |
| 			}
 | |
| 
 | |
| 			if (!(kp_cur_group == (key & GROUP_MASK) ||
 | |
| 			      kp_cur_group == -1))
 | |
| 				continue;
 | |
| 
 | |
| 			kp_cur_group = key & GROUP_MASK;
 | |
| 			input_report_key(omap_kp_data->input, key & ~GROUP_MASK,
 | |
| 					 new_state[col] & (1 << row));
 | |
| #endif
 | |
| 		}
 | |
| 	}
 | |
| 	input_sync(omap_kp_data->input);
 | |
| 	memcpy(keypad_state, new_state, sizeof(keypad_state));
 | |
| 
 | |
| 	if (key_down) {
 | |
| 		int delay = HZ / 20;
 | |
| 		/* some key is pressed - keep irq disabled and use timer
 | |
| 		 * to poll the keypad */
 | |
| 		if (spurious)
 | |
| 			delay = 2 * HZ;
 | |
| 		mod_timer(&omap_kp_data->timer, jiffies + delay);
 | |
| 	} else {
 | |
| 		/* enable interrupts */
 | |
| 		omap_writew(0, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
 | |
| 		kp_cur_group = -1;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static ssize_t omap_kp_enable_show(struct device *dev,
 | |
| 				   struct device_attribute *attr, char *buf)
 | |
| {
 | |
| 	return sprintf(buf, "%u\n", kp_enable);
 | |
| }
 | |
| 
 | |
| static ssize_t omap_kp_enable_store(struct device *dev, struct device_attribute *attr,
 | |
| 				    const char *buf, size_t count)
 | |
| {
 | |
| 	struct omap_kp *omap_kp = dev_get_drvdata(dev);
 | |
| 	int state;
 | |
| 
 | |
| 	if (sscanf(buf, "%u", &state) != 1)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	if ((state != 1) && (state != 0))
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	mutex_lock(&kp_enable_mutex);
 | |
| 	if (state != kp_enable) {
 | |
| 		if (state)
 | |
| 			enable_irq(omap_kp->irq);
 | |
| 		else
 | |
| 			disable_irq(omap_kp->irq);
 | |
| 		kp_enable = state;
 | |
| 	}
 | |
| 	mutex_unlock(&kp_enable_mutex);
 | |
| 
 | |
| 	return strnlen(buf, count);
 | |
| }
 | |
| 
 | |
| static DEVICE_ATTR(enable, S_IRUGO | S_IWUSR, omap_kp_enable_show, omap_kp_enable_store);
 | |
| 
 | |
| #ifdef CONFIG_PM
 | |
| static int omap_kp_suspend(struct platform_device *dev, pm_message_t state)
 | |
| {
 | |
| 	/* Nothing yet */
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int omap_kp_resume(struct platform_device *dev)
 | |
| {
 | |
| 	/* Nothing yet */
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| #else
 | |
| #define omap_kp_suspend	NULL
 | |
| #define omap_kp_resume	NULL
 | |
| #endif
 | |
| 
 | |
| static int omap_kp_probe(struct platform_device *pdev)
 | |
| {
 | |
| 	struct omap_kp *omap_kp;
 | |
| 	struct input_dev *input_dev;
 | |
| 	struct omap_kp_platform_data *pdata =  pdev->dev.platform_data;
 | |
| 	int i, col_idx, row_idx, ret;
 | |
| 	unsigned int row_shift, keycodemax;
 | |
| 
 | |
| 	if (!pdata->rows || !pdata->cols || !pdata->keymap_data) {
 | |
| 		printk(KERN_ERR "No rows, cols or keymap_data from pdata\n");
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	row_shift = get_count_order(pdata->cols);
 | |
| 	keycodemax = pdata->rows << row_shift;
 | |
| 
 | |
| 	omap_kp = kzalloc(sizeof(struct omap_kp) +
 | |
| 			keycodemax * sizeof(unsigned short), GFP_KERNEL);
 | |
| 	input_dev = input_allocate_device();
 | |
| 	if (!omap_kp || !input_dev) {
 | |
| 		kfree(omap_kp);
 | |
| 		input_free_device(input_dev);
 | |
| 		return -ENOMEM;
 | |
| 	}
 | |
| 
 | |
| 	platform_set_drvdata(pdev, omap_kp);
 | |
| 
 | |
| 	omap_kp->input = input_dev;
 | |
| 
 | |
| 	/* Disable the interrupt for the MPUIO keyboard */
 | |
| 	omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
 | |
| 
 | |
| 	if (pdata->delay)
 | |
| 		omap_kp->delay = pdata->delay;
 | |
| 
 | |
| 	if (pdata->row_gpios && pdata->col_gpios) {
 | |
| 		row_gpios = pdata->row_gpios;
 | |
| 		col_gpios = pdata->col_gpios;
 | |
| 	}
 | |
| 
 | |
| 	omap_kp->rows = pdata->rows;
 | |
| 	omap_kp->cols = pdata->cols;
 | |
| 
 | |
| 	col_idx = 0;
 | |
| 	row_idx = 0;
 | |
| 
 | |
| 	setup_timer(&omap_kp->timer, omap_kp_timer, (unsigned long)omap_kp);
 | |
| 
 | |
| 	/* get the irq and init timer*/
 | |
| 	tasklet_enable(&kp_tasklet);
 | |
| 	kp_tasklet.data = (unsigned long) omap_kp;
 | |
| 
 | |
| 	ret = device_create_file(&pdev->dev, &dev_attr_enable);
 | |
| 	if (ret < 0)
 | |
| 		goto err2;
 | |
| 
 | |
| 	/* setup input device */
 | |
| 	input_dev->name = "omap-keypad";
 | |
| 	input_dev->phys = "omap-keypad/input0";
 | |
| 	input_dev->dev.parent = &pdev->dev;
 | |
| 
 | |
| 	input_dev->id.bustype = BUS_HOST;
 | |
| 	input_dev->id.vendor = 0x0001;
 | |
| 	input_dev->id.product = 0x0001;
 | |
| 	input_dev->id.version = 0x0100;
 | |
| 
 | |
| 	if (pdata->rep)
 | |
| 		__set_bit(EV_REP, input_dev->evbit);
 | |
| 
 | |
| 	ret = matrix_keypad_build_keymap(pdata->keymap_data, NULL,
 | |
| 					 pdata->rows, pdata->cols,
 | |
| 					 omap_kp->keymap, input_dev);
 | |
| 	if (ret < 0)
 | |
| 		goto err3;
 | |
| 
 | |
| 	ret = input_register_device(omap_kp->input);
 | |
| 	if (ret < 0) {
 | |
| 		printk(KERN_ERR "Unable to register omap-keypad input device\n");
 | |
| 		goto err3;
 | |
| 	}
 | |
| 
 | |
| 	if (pdata->dbounce)
 | |
| 		omap_writew(0xff, OMAP1_MPUIO_BASE + OMAP_MPUIO_GPIO_DEBOUNCING);
 | |
| 
 | |
| 	/* scan current status and enable interrupt */
 | |
| 	omap_kp_scan_keypad(omap_kp, keypad_state);
 | |
| 	omap_kp->irq = platform_get_irq(pdev, 0);
 | |
| 	if (omap_kp->irq >= 0) {
 | |
| 		if (request_irq(omap_kp->irq, omap_kp_interrupt, 0,
 | |
| 				"omap-keypad", omap_kp) < 0)
 | |
| 			goto err4;
 | |
| 	}
 | |
| 	omap_writew(0, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| err4:
 | |
| 	input_unregister_device(omap_kp->input);
 | |
| 	input_dev = NULL;
 | |
| err3:
 | |
| 	device_remove_file(&pdev->dev, &dev_attr_enable);
 | |
| err2:
 | |
| 	for (i = row_idx - 1; i >= 0; i--)
 | |
| 		gpio_free(row_gpios[i]);
 | |
| 	for (i = col_idx - 1; i >= 0; i--)
 | |
| 		gpio_free(col_gpios[i]);
 | |
| 
 | |
| 	kfree(omap_kp);
 | |
| 	input_free_device(input_dev);
 | |
| 
 | |
| 	return -EINVAL;
 | |
| }
 | |
| 
 | |
| static int omap_kp_remove(struct platform_device *pdev)
 | |
| {
 | |
| 	struct omap_kp *omap_kp = platform_get_drvdata(pdev);
 | |
| 
 | |
| 	/* disable keypad interrupt handling */
 | |
| 	tasklet_disable(&kp_tasklet);
 | |
| 	omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
 | |
| 	free_irq(omap_kp->irq, omap_kp);
 | |
| 
 | |
| 	del_timer_sync(&omap_kp->timer);
 | |
| 	tasklet_kill(&kp_tasklet);
 | |
| 
 | |
| 	/* unregister everything */
 | |
| 	input_unregister_device(omap_kp->input);
 | |
| 
 | |
| 	kfree(omap_kp);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static struct platform_driver omap_kp_driver = {
 | |
| 	.probe		= omap_kp_probe,
 | |
| 	.remove		= omap_kp_remove,
 | |
| 	.suspend	= omap_kp_suspend,
 | |
| 	.resume		= omap_kp_resume,
 | |
| 	.driver		= {
 | |
| 		.name	= "omap-keypad",
 | |
| 		.owner	= THIS_MODULE,
 | |
| 	},
 | |
| };
 | |
| module_platform_driver(omap_kp_driver);
 | |
| 
 | |
| MODULE_AUTHOR("Timo Teräs");
 | |
| MODULE_DESCRIPTION("OMAP Keypad Driver");
 | |
| MODULE_LICENSE("GPL");
 | |
| MODULE_ALIAS("platform:omap-keypad");
 |