rtc-omap driver modules is used both by OMAP1/2, Davinci SoC platforms.
However, rtc wake support on OMAP1 is broken.  Hence the
device_init_wakeup() was removed from rtc-omap driver and moved to
platform board files that supported it (DA850/OMAP-L138).  [1]
However, recently [2] it was suggested that driver should always do a
device_init_wakeup(dev, true). Platforms that don't want/need
wakeup support can disable it from userspace via:
    echo disabled > /sys/devices/.../power/wakeup
Also, with the new DT boot-up, board file doesn't exist and hence there
is no way to have device wakeup support rtc.
The fix for above issues, is to hard code device_init_wakeup() inside
driver and let platforms that don't need this, handle it through the
sysfs power entry.
[1]
https://patchwork.kernel.org/patch/136731/
[2]
http://www.mail-archive.com/davinci-linux-open-source@linux.
davincidsp.com/msg26077.html
Signed-off-by: Hebbar Gururaja <gururaja.hebbar@ti.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Acked-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
		
	
			
		
			
				
	
	
		
			520 lines
		
	
	
	
		
			14 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			520 lines
		
	
	
	
		
			14 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
/*
 | 
						|
 * TI OMAP1 Real Time Clock interface for Linux
 | 
						|
 *
 | 
						|
 * Copyright (C) 2003 MontaVista Software, Inc.
 | 
						|
 * Author: George G. Davis <gdavis@mvista.com> or <source@mvista.com>
 | 
						|
 *
 | 
						|
 * Copyright (C) 2006 David Brownell (new RTC framework)
 | 
						|
 *
 | 
						|
 * This program is free software; you can redistribute it and/or
 | 
						|
 * modify it under the terms of the GNU General Public License
 | 
						|
 * as published by the Free Software Foundation; either version
 | 
						|
 * 2 of the License, or (at your option) any later version.
 | 
						|
 */
 | 
						|
 | 
						|
#include <linux/kernel.h>
 | 
						|
#include <linux/init.h>
 | 
						|
#include <linux/module.h>
 | 
						|
#include <linux/ioport.h>
 | 
						|
#include <linux/delay.h>
 | 
						|
#include <linux/rtc.h>
 | 
						|
#include <linux/bcd.h>
 | 
						|
#include <linux/platform_device.h>
 | 
						|
#include <linux/of.h>
 | 
						|
#include <linux/of_device.h>
 | 
						|
#include <linux/pm_runtime.h>
 | 
						|
#include <linux/io.h>
 | 
						|
 | 
						|
/* The OMAP1 RTC is a year/month/day/hours/minutes/seconds BCD clock
 | 
						|
 * with century-range alarm matching, driven by the 32kHz clock.
 | 
						|
 *
 | 
						|
 * The main user-visible ways it differs from PC RTCs are by omitting
 | 
						|
 * "don't care" alarm fields and sub-second periodic IRQs, and having
 | 
						|
 * an autoadjust mechanism to calibrate to the true oscillator rate.
 | 
						|
 *
 | 
						|
 * Board-specific wiring options include using split power mode with
 | 
						|
 * RTC_OFF_NOFF used as the reset signal (so the RTC won't be reset),
 | 
						|
 * and wiring RTC_WAKE_INT (so the RTC alarm can wake the system from
 | 
						|
 * low power modes) for OMAP1 boards (OMAP-L138 has this built into
 | 
						|
 * the SoC). See the BOARD-SPECIFIC CUSTOMIZATION comment.
 | 
						|
 */
 | 
						|
 | 
						|
#define	DRIVER_NAME			"omap_rtc"
 | 
						|
 | 
						|
#define OMAP_RTC_BASE			0xfffb4800
 | 
						|
 | 
						|
/* RTC registers */
 | 
						|
#define OMAP_RTC_SECONDS_REG		0x00
 | 
						|
#define OMAP_RTC_MINUTES_REG		0x04
 | 
						|
#define OMAP_RTC_HOURS_REG		0x08
 | 
						|
#define OMAP_RTC_DAYS_REG		0x0C
 | 
						|
#define OMAP_RTC_MONTHS_REG		0x10
 | 
						|
#define OMAP_RTC_YEARS_REG		0x14
 | 
						|
#define OMAP_RTC_WEEKS_REG		0x18
 | 
						|
 | 
						|
#define OMAP_RTC_ALARM_SECONDS_REG	0x20
 | 
						|
#define OMAP_RTC_ALARM_MINUTES_REG	0x24
 | 
						|
#define OMAP_RTC_ALARM_HOURS_REG	0x28
 | 
						|
#define OMAP_RTC_ALARM_DAYS_REG		0x2c
 | 
						|
#define OMAP_RTC_ALARM_MONTHS_REG	0x30
 | 
						|
#define OMAP_RTC_ALARM_YEARS_REG	0x34
 | 
						|
 | 
						|
#define OMAP_RTC_CTRL_REG		0x40
 | 
						|
#define OMAP_RTC_STATUS_REG		0x44
 | 
						|
#define OMAP_RTC_INTERRUPTS_REG		0x48
 | 
						|
 | 
						|
#define OMAP_RTC_COMP_LSB_REG		0x4c
 | 
						|
#define OMAP_RTC_COMP_MSB_REG		0x50
 | 
						|
#define OMAP_RTC_OSC_REG		0x54
 | 
						|
 | 
						|
#define OMAP_RTC_KICK0_REG		0x6c
 | 
						|
#define OMAP_RTC_KICK1_REG		0x70
 | 
						|
 | 
						|
/* OMAP_RTC_CTRL_REG bit fields: */
 | 
						|
#define OMAP_RTC_CTRL_SPLIT		(1<<7)
 | 
						|
#define OMAP_RTC_CTRL_DISABLE		(1<<6)
 | 
						|
#define OMAP_RTC_CTRL_SET_32_COUNTER	(1<<5)
 | 
						|
#define OMAP_RTC_CTRL_TEST		(1<<4)
 | 
						|
#define OMAP_RTC_CTRL_MODE_12_24	(1<<3)
 | 
						|
#define OMAP_RTC_CTRL_AUTO_COMP		(1<<2)
 | 
						|
#define OMAP_RTC_CTRL_ROUND_30S		(1<<1)
 | 
						|
#define OMAP_RTC_CTRL_STOP		(1<<0)
 | 
						|
 | 
						|
/* OMAP_RTC_STATUS_REG bit fields: */
 | 
						|
#define OMAP_RTC_STATUS_POWER_UP        (1<<7)
 | 
						|
#define OMAP_RTC_STATUS_ALARM           (1<<6)
 | 
						|
#define OMAP_RTC_STATUS_1D_EVENT        (1<<5)
 | 
						|
#define OMAP_RTC_STATUS_1H_EVENT        (1<<4)
 | 
						|
#define OMAP_RTC_STATUS_1M_EVENT        (1<<3)
 | 
						|
#define OMAP_RTC_STATUS_1S_EVENT        (1<<2)
 | 
						|
#define OMAP_RTC_STATUS_RUN             (1<<1)
 | 
						|
#define OMAP_RTC_STATUS_BUSY            (1<<0)
 | 
						|
 | 
						|
/* OMAP_RTC_INTERRUPTS_REG bit fields: */
 | 
						|
#define OMAP_RTC_INTERRUPTS_IT_ALARM    (1<<3)
 | 
						|
#define OMAP_RTC_INTERRUPTS_IT_TIMER    (1<<2)
 | 
						|
 | 
						|
/* OMAP_RTC_KICKER values */
 | 
						|
#define	KICK0_VALUE			0x83e70b13
 | 
						|
#define	KICK1_VALUE			0x95a4f1e0
 | 
						|
 | 
						|
#define	OMAP_RTC_HAS_KICKER		0x1
 | 
						|
 | 
						|
static void __iomem	*rtc_base;
 | 
						|
 | 
						|
#define rtc_read(addr)		readb(rtc_base + (addr))
 | 
						|
#define rtc_write(val, addr)	writeb(val, rtc_base + (addr))
 | 
						|
 | 
						|
#define rtc_writel(val, addr)	writel(val, rtc_base + (addr))
 | 
						|
 | 
						|
 | 
						|
/* we rely on the rtc framework to handle locking (rtc->ops_lock),
 | 
						|
 * so the only other requirement is that register accesses which
 | 
						|
 * require BUSY to be clear are made with IRQs locally disabled
 | 
						|
 */
 | 
						|
static void rtc_wait_not_busy(void)
 | 
						|
{
 | 
						|
	int	count = 0;
 | 
						|
	u8	status;
 | 
						|
 | 
						|
	/* BUSY may stay active for 1/32768 second (~30 usec) */
 | 
						|
	for (count = 0; count < 50; count++) {
 | 
						|
		status = rtc_read(OMAP_RTC_STATUS_REG);
 | 
						|
		if ((status & (u8)OMAP_RTC_STATUS_BUSY) == 0)
 | 
						|
			break;
 | 
						|
		udelay(1);
 | 
						|
	}
 | 
						|
	/* now we have ~15 usec to read/write various registers */
 | 
						|
}
 | 
						|
 | 
						|
static irqreturn_t rtc_irq(int irq, void *rtc)
 | 
						|
{
 | 
						|
	unsigned long		events = 0;
 | 
						|
	u8			irq_data;
 | 
						|
 | 
						|
	irq_data = rtc_read(OMAP_RTC_STATUS_REG);
 | 
						|
 | 
						|
	/* alarm irq? */
 | 
						|
	if (irq_data & OMAP_RTC_STATUS_ALARM) {
 | 
						|
		rtc_write(OMAP_RTC_STATUS_ALARM, OMAP_RTC_STATUS_REG);
 | 
						|
		events |= RTC_IRQF | RTC_AF;
 | 
						|
	}
 | 
						|
 | 
						|
	/* 1/sec periodic/update irq? */
 | 
						|
	if (irq_data & OMAP_RTC_STATUS_1S_EVENT)
 | 
						|
		events |= RTC_IRQF | RTC_UF;
 | 
						|
 | 
						|
	rtc_update_irq(rtc, 1, events);
 | 
						|
 | 
						|
	return IRQ_HANDLED;
 | 
						|
}
 | 
						|
 | 
						|
static int omap_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
 | 
						|
{
 | 
						|
	u8 reg;
 | 
						|
 | 
						|
	local_irq_disable();
 | 
						|
	rtc_wait_not_busy();
 | 
						|
	reg = rtc_read(OMAP_RTC_INTERRUPTS_REG);
 | 
						|
	if (enabled)
 | 
						|
		reg |= OMAP_RTC_INTERRUPTS_IT_ALARM;
 | 
						|
	else
 | 
						|
		reg &= ~OMAP_RTC_INTERRUPTS_IT_ALARM;
 | 
						|
	rtc_wait_not_busy();
 | 
						|
	rtc_write(reg, OMAP_RTC_INTERRUPTS_REG);
 | 
						|
	local_irq_enable();
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
/* this hardware doesn't support "don't care" alarm fields */
 | 
						|
static int tm2bcd(struct rtc_time *tm)
 | 
						|
{
 | 
						|
	if (rtc_valid_tm(tm) != 0)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	tm->tm_sec = bin2bcd(tm->tm_sec);
 | 
						|
	tm->tm_min = bin2bcd(tm->tm_min);
 | 
						|
	tm->tm_hour = bin2bcd(tm->tm_hour);
 | 
						|
	tm->tm_mday = bin2bcd(tm->tm_mday);
 | 
						|
 | 
						|
	tm->tm_mon = bin2bcd(tm->tm_mon + 1);
 | 
						|
 | 
						|
	/* epoch == 1900 */
 | 
						|
	if (tm->tm_year < 100 || tm->tm_year > 199)
 | 
						|
		return -EINVAL;
 | 
						|
	tm->tm_year = bin2bcd(tm->tm_year - 100);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static void bcd2tm(struct rtc_time *tm)
 | 
						|
{
 | 
						|
	tm->tm_sec = bcd2bin(tm->tm_sec);
 | 
						|
	tm->tm_min = bcd2bin(tm->tm_min);
 | 
						|
	tm->tm_hour = bcd2bin(tm->tm_hour);
 | 
						|
	tm->tm_mday = bcd2bin(tm->tm_mday);
 | 
						|
	tm->tm_mon = bcd2bin(tm->tm_mon) - 1;
 | 
						|
	/* epoch == 1900 */
 | 
						|
	tm->tm_year = bcd2bin(tm->tm_year) + 100;
 | 
						|
}
 | 
						|
 | 
						|
 | 
						|
static int omap_rtc_read_time(struct device *dev, struct rtc_time *tm)
 | 
						|
{
 | 
						|
	/* we don't report wday/yday/isdst ... */
 | 
						|
	local_irq_disable();
 | 
						|
	rtc_wait_not_busy();
 | 
						|
 | 
						|
	tm->tm_sec = rtc_read(OMAP_RTC_SECONDS_REG);
 | 
						|
	tm->tm_min = rtc_read(OMAP_RTC_MINUTES_REG);
 | 
						|
	tm->tm_hour = rtc_read(OMAP_RTC_HOURS_REG);
 | 
						|
	tm->tm_mday = rtc_read(OMAP_RTC_DAYS_REG);
 | 
						|
	tm->tm_mon = rtc_read(OMAP_RTC_MONTHS_REG);
 | 
						|
	tm->tm_year = rtc_read(OMAP_RTC_YEARS_REG);
 | 
						|
 | 
						|
	local_irq_enable();
 | 
						|
 | 
						|
	bcd2tm(tm);
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int omap_rtc_set_time(struct device *dev, struct rtc_time *tm)
 | 
						|
{
 | 
						|
	if (tm2bcd(tm) < 0)
 | 
						|
		return -EINVAL;
 | 
						|
	local_irq_disable();
 | 
						|
	rtc_wait_not_busy();
 | 
						|
 | 
						|
	rtc_write(tm->tm_year, OMAP_RTC_YEARS_REG);
 | 
						|
	rtc_write(tm->tm_mon, OMAP_RTC_MONTHS_REG);
 | 
						|
	rtc_write(tm->tm_mday, OMAP_RTC_DAYS_REG);
 | 
						|
	rtc_write(tm->tm_hour, OMAP_RTC_HOURS_REG);
 | 
						|
	rtc_write(tm->tm_min, OMAP_RTC_MINUTES_REG);
 | 
						|
	rtc_write(tm->tm_sec, OMAP_RTC_SECONDS_REG);
 | 
						|
 | 
						|
	local_irq_enable();
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int omap_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
 | 
						|
{
 | 
						|
	local_irq_disable();
 | 
						|
	rtc_wait_not_busy();
 | 
						|
 | 
						|
	alm->time.tm_sec = rtc_read(OMAP_RTC_ALARM_SECONDS_REG);
 | 
						|
	alm->time.tm_min = rtc_read(OMAP_RTC_ALARM_MINUTES_REG);
 | 
						|
	alm->time.tm_hour = rtc_read(OMAP_RTC_ALARM_HOURS_REG);
 | 
						|
	alm->time.tm_mday = rtc_read(OMAP_RTC_ALARM_DAYS_REG);
 | 
						|
	alm->time.tm_mon = rtc_read(OMAP_RTC_ALARM_MONTHS_REG);
 | 
						|
	alm->time.tm_year = rtc_read(OMAP_RTC_ALARM_YEARS_REG);
 | 
						|
 | 
						|
	local_irq_enable();
 | 
						|
 | 
						|
	bcd2tm(&alm->time);
 | 
						|
	alm->enabled = !!(rtc_read(OMAP_RTC_INTERRUPTS_REG)
 | 
						|
			& OMAP_RTC_INTERRUPTS_IT_ALARM);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int omap_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
 | 
						|
{
 | 
						|
	u8 reg;
 | 
						|
 | 
						|
	if (tm2bcd(&alm->time) < 0)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	local_irq_disable();
 | 
						|
	rtc_wait_not_busy();
 | 
						|
 | 
						|
	rtc_write(alm->time.tm_year, OMAP_RTC_ALARM_YEARS_REG);
 | 
						|
	rtc_write(alm->time.tm_mon, OMAP_RTC_ALARM_MONTHS_REG);
 | 
						|
	rtc_write(alm->time.tm_mday, OMAP_RTC_ALARM_DAYS_REG);
 | 
						|
	rtc_write(alm->time.tm_hour, OMAP_RTC_ALARM_HOURS_REG);
 | 
						|
	rtc_write(alm->time.tm_min, OMAP_RTC_ALARM_MINUTES_REG);
 | 
						|
	rtc_write(alm->time.tm_sec, OMAP_RTC_ALARM_SECONDS_REG);
 | 
						|
 | 
						|
	reg = rtc_read(OMAP_RTC_INTERRUPTS_REG);
 | 
						|
	if (alm->enabled)
 | 
						|
		reg |= OMAP_RTC_INTERRUPTS_IT_ALARM;
 | 
						|
	else
 | 
						|
		reg &= ~OMAP_RTC_INTERRUPTS_IT_ALARM;
 | 
						|
	rtc_write(reg, OMAP_RTC_INTERRUPTS_REG);
 | 
						|
 | 
						|
	local_irq_enable();
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static struct rtc_class_ops omap_rtc_ops = {
 | 
						|
	.read_time	= omap_rtc_read_time,
 | 
						|
	.set_time	= omap_rtc_set_time,
 | 
						|
	.read_alarm	= omap_rtc_read_alarm,
 | 
						|
	.set_alarm	= omap_rtc_set_alarm,
 | 
						|
	.alarm_irq_enable = omap_rtc_alarm_irq_enable,
 | 
						|
};
 | 
						|
 | 
						|
static int omap_rtc_alarm;
 | 
						|
static int omap_rtc_timer;
 | 
						|
 | 
						|
#define	OMAP_RTC_DATA_DA830_IDX	1
 | 
						|
 | 
						|
static struct platform_device_id omap_rtc_devtype[] = {
 | 
						|
	{
 | 
						|
		.name	= DRIVER_NAME,
 | 
						|
	}, {
 | 
						|
		.name	= "da830-rtc",
 | 
						|
		.driver_data = OMAP_RTC_HAS_KICKER,
 | 
						|
	},
 | 
						|
	{},
 | 
						|
};
 | 
						|
MODULE_DEVICE_TABLE(platform, omap_rtc_devtype);
 | 
						|
 | 
						|
static const struct of_device_id omap_rtc_of_match[] = {
 | 
						|
	{	.compatible	= "ti,da830-rtc",
 | 
						|
		.data		= &omap_rtc_devtype[OMAP_RTC_DATA_DA830_IDX],
 | 
						|
	},
 | 
						|
	{},
 | 
						|
};
 | 
						|
MODULE_DEVICE_TABLE(of, omap_rtc_of_match);
 | 
						|
 | 
						|
static int __init omap_rtc_probe(struct platform_device *pdev)
 | 
						|
{
 | 
						|
	struct resource		*res;
 | 
						|
	struct rtc_device	*rtc;
 | 
						|
	u8			reg, new_ctrl;
 | 
						|
	const struct platform_device_id *id_entry;
 | 
						|
	const struct of_device_id *of_id;
 | 
						|
 | 
						|
	of_id = of_match_device(omap_rtc_of_match, &pdev->dev);
 | 
						|
	if (of_id)
 | 
						|
		pdev->id_entry = of_id->data;
 | 
						|
 | 
						|
	omap_rtc_timer = platform_get_irq(pdev, 0);
 | 
						|
	if (omap_rtc_timer <= 0) {
 | 
						|
		pr_debug("%s: no update irq?\n", pdev->name);
 | 
						|
		return -ENOENT;
 | 
						|
	}
 | 
						|
 | 
						|
	omap_rtc_alarm = platform_get_irq(pdev, 1);
 | 
						|
	if (omap_rtc_alarm <= 0) {
 | 
						|
		pr_debug("%s: no alarm irq?\n", pdev->name);
 | 
						|
		return -ENOENT;
 | 
						|
	}
 | 
						|
 | 
						|
	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 | 
						|
	rtc_base = devm_ioremap_resource(&pdev->dev, res);
 | 
						|
	if (IS_ERR(rtc_base))
 | 
						|
		return PTR_ERR(rtc_base);
 | 
						|
 | 
						|
	/* Enable the clock/module so that we can access the registers */
 | 
						|
	pm_runtime_enable(&pdev->dev);
 | 
						|
	pm_runtime_get_sync(&pdev->dev);
 | 
						|
 | 
						|
	id_entry = platform_get_device_id(pdev);
 | 
						|
	if (id_entry && (id_entry->driver_data & OMAP_RTC_HAS_KICKER)) {
 | 
						|
		rtc_writel(KICK0_VALUE, OMAP_RTC_KICK0_REG);
 | 
						|
		rtc_writel(KICK1_VALUE, OMAP_RTC_KICK1_REG);
 | 
						|
	}
 | 
						|
 | 
						|
	rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
 | 
						|
			&omap_rtc_ops, THIS_MODULE);
 | 
						|
	if (IS_ERR(rtc)) {
 | 
						|
		pr_debug("%s: can't register RTC device, err %ld\n",
 | 
						|
			pdev->name, PTR_ERR(rtc));
 | 
						|
		goto fail0;
 | 
						|
	}
 | 
						|
	platform_set_drvdata(pdev, rtc);
 | 
						|
 | 
						|
	/* clear pending irqs, and set 1/second periodic,
 | 
						|
	 * which we'll use instead of update irqs
 | 
						|
	 */
 | 
						|
	rtc_write(0, OMAP_RTC_INTERRUPTS_REG);
 | 
						|
 | 
						|
	/* clear old status */
 | 
						|
	reg = rtc_read(OMAP_RTC_STATUS_REG);
 | 
						|
	if (reg & (u8) OMAP_RTC_STATUS_POWER_UP) {
 | 
						|
		pr_info("%s: RTC power up reset detected\n",
 | 
						|
			pdev->name);
 | 
						|
		rtc_write(OMAP_RTC_STATUS_POWER_UP, OMAP_RTC_STATUS_REG);
 | 
						|
	}
 | 
						|
	if (reg & (u8) OMAP_RTC_STATUS_ALARM)
 | 
						|
		rtc_write(OMAP_RTC_STATUS_ALARM, OMAP_RTC_STATUS_REG);
 | 
						|
 | 
						|
	/* handle periodic and alarm irqs */
 | 
						|
	if (devm_request_irq(&pdev->dev, omap_rtc_timer, rtc_irq, 0,
 | 
						|
			dev_name(&rtc->dev), rtc)) {
 | 
						|
		pr_debug("%s: RTC timer interrupt IRQ%d already claimed\n",
 | 
						|
			pdev->name, omap_rtc_timer);
 | 
						|
		goto fail0;
 | 
						|
	}
 | 
						|
	if ((omap_rtc_timer != omap_rtc_alarm) &&
 | 
						|
		(devm_request_irq(&pdev->dev, omap_rtc_alarm, rtc_irq, 0,
 | 
						|
			dev_name(&rtc->dev), rtc))) {
 | 
						|
		pr_debug("%s: RTC alarm interrupt IRQ%d already claimed\n",
 | 
						|
			pdev->name, omap_rtc_alarm);
 | 
						|
		goto fail0;
 | 
						|
	}
 | 
						|
 | 
						|
	/* On boards with split power, RTC_ON_NOFF won't reset the RTC */
 | 
						|
	reg = rtc_read(OMAP_RTC_CTRL_REG);
 | 
						|
	if (reg & (u8) OMAP_RTC_CTRL_STOP)
 | 
						|
		pr_info("%s: already running\n", pdev->name);
 | 
						|
 | 
						|
	/* force to 24 hour mode */
 | 
						|
	new_ctrl = reg & (OMAP_RTC_CTRL_SPLIT|OMAP_RTC_CTRL_AUTO_COMP);
 | 
						|
	new_ctrl |= OMAP_RTC_CTRL_STOP;
 | 
						|
 | 
						|
	/* BOARD-SPECIFIC CUSTOMIZATION CAN GO HERE:
 | 
						|
	 *
 | 
						|
	 *  - Device wake-up capability setting should come through chip
 | 
						|
	 *    init logic. OMAP1 boards should initialize the "wakeup capable"
 | 
						|
	 *    flag in the platform device if the board is wired right for
 | 
						|
	 *    being woken up by RTC alarm. For OMAP-L138, this capability
 | 
						|
	 *    is built into the SoC by the "Deep Sleep" capability.
 | 
						|
	 *
 | 
						|
	 *  - Boards wired so RTC_ON_nOFF is used as the reset signal,
 | 
						|
	 *    rather than nPWRON_RESET, should forcibly enable split
 | 
						|
	 *    power mode.  (Some chip errata report that RTC_CTRL_SPLIT
 | 
						|
	 *    is write-only, and always reads as zero...)
 | 
						|
	 */
 | 
						|
 | 
						|
	device_init_wakeup(&pdev->dev, true);
 | 
						|
 | 
						|
	if (new_ctrl & (u8) OMAP_RTC_CTRL_SPLIT)
 | 
						|
		pr_info("%s: split power mode\n", pdev->name);
 | 
						|
 | 
						|
	if (reg != new_ctrl)
 | 
						|
		rtc_write(new_ctrl, OMAP_RTC_CTRL_REG);
 | 
						|
 | 
						|
	return 0;
 | 
						|
 | 
						|
fail0:
 | 
						|
	if (id_entry && (id_entry->driver_data & OMAP_RTC_HAS_KICKER))
 | 
						|
		rtc_writel(0, OMAP_RTC_KICK0_REG);
 | 
						|
	pm_runtime_put_sync(&pdev->dev);
 | 
						|
	pm_runtime_disable(&pdev->dev);
 | 
						|
	return -EIO;
 | 
						|
}
 | 
						|
 | 
						|
static int __exit omap_rtc_remove(struct platform_device *pdev)
 | 
						|
{
 | 
						|
	const struct platform_device_id *id_entry =
 | 
						|
				platform_get_device_id(pdev);
 | 
						|
 | 
						|
	device_init_wakeup(&pdev->dev, 0);
 | 
						|
 | 
						|
	/* leave rtc running, but disable irqs */
 | 
						|
	rtc_write(0, OMAP_RTC_INTERRUPTS_REG);
 | 
						|
 | 
						|
	if (id_entry && (id_entry->driver_data & OMAP_RTC_HAS_KICKER))
 | 
						|
		rtc_writel(0, OMAP_RTC_KICK0_REG);
 | 
						|
 | 
						|
	/* Disable the clock/module */
 | 
						|
	pm_runtime_put_sync(&pdev->dev);
 | 
						|
	pm_runtime_disable(&pdev->dev);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
#ifdef CONFIG_PM_SLEEP
 | 
						|
static u8 irqstat;
 | 
						|
 | 
						|
static int omap_rtc_suspend(struct device *dev)
 | 
						|
{
 | 
						|
	irqstat = rtc_read(OMAP_RTC_INTERRUPTS_REG);
 | 
						|
 | 
						|
	/* FIXME the RTC alarm is not currently acting as a wakeup event
 | 
						|
	 * source, and in fact this enable() call is just saving a flag
 | 
						|
	 * that's never used...
 | 
						|
	 */
 | 
						|
	if (device_may_wakeup(dev))
 | 
						|
		enable_irq_wake(omap_rtc_alarm);
 | 
						|
	else
 | 
						|
		rtc_write(0, OMAP_RTC_INTERRUPTS_REG);
 | 
						|
 | 
						|
	/* Disable the clock/module */
 | 
						|
	pm_runtime_put_sync(dev);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int omap_rtc_resume(struct device *dev)
 | 
						|
{
 | 
						|
	/* Enable the clock/module so that we can access the registers */
 | 
						|
	pm_runtime_get_sync(dev);
 | 
						|
 | 
						|
	if (device_may_wakeup(dev))
 | 
						|
		disable_irq_wake(omap_rtc_alarm);
 | 
						|
	else
 | 
						|
		rtc_write(irqstat, OMAP_RTC_INTERRUPTS_REG);
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
#endif
 | 
						|
 | 
						|
static SIMPLE_DEV_PM_OPS(omap_rtc_pm_ops, omap_rtc_suspend, omap_rtc_resume);
 | 
						|
 | 
						|
static void omap_rtc_shutdown(struct platform_device *pdev)
 | 
						|
{
 | 
						|
	rtc_write(0, OMAP_RTC_INTERRUPTS_REG);
 | 
						|
}
 | 
						|
 | 
						|
MODULE_ALIAS("platform:omap_rtc");
 | 
						|
static struct platform_driver omap_rtc_driver = {
 | 
						|
	.remove		= __exit_p(omap_rtc_remove),
 | 
						|
	.shutdown	= omap_rtc_shutdown,
 | 
						|
	.driver		= {
 | 
						|
		.name	= DRIVER_NAME,
 | 
						|
		.owner	= THIS_MODULE,
 | 
						|
		.pm	= &omap_rtc_pm_ops,
 | 
						|
		.of_match_table = of_match_ptr(omap_rtc_of_match),
 | 
						|
	},
 | 
						|
	.id_table	= omap_rtc_devtype,
 | 
						|
};
 | 
						|
 | 
						|
module_platform_driver_probe(omap_rtc_driver, omap_rtc_probe);
 | 
						|
 | 
						|
MODULE_AUTHOR("George G. Davis (and others)");
 | 
						|
MODULE_LICENSE("GPL");
 |