 3569e5374d
			
		
	
	
	3569e5374d
	
	
	
		
			
			This patch fixes an unbalanced refcount issue. Elevating the lock for both kref_put and also for controller node deletion. Previously, controller deletion was protected but the not the kref_put. This was causing the other thread to pick up the controller structure which was already kref'd zero. This was causing the following WARN_ON and also sometimes panic. WARNING: at lib/kref.c:43 kref_get+0x2d/0x30() (Not tainted) Hardware name: IBM System x3655 -[7985AC1]- Modules linked in: fuse scsi_dh_rdac autofs4 nfs lockd fscache nfs_acl auth_rpcgss sunrpc 8021q garp stp llc ipv6 ib_srp(U) scsi_transport_srp scsi_tgt ib_cm(U) ib_sa(U) ib_uverbs(U) ib_umad(U) mlx4_ib(U) mlx4_core(U) ib_mthca(U) ib_mad(U) ib_core(U) dm_mirror dm_region_hash dm_log dm_round_robin dm_multipath uinput bnx2 ses enclosure sg ibmpex ibmaem ipmi_msghandler serio_raw k8temp hwmon amd64_edac_mod edac_core edac_mce_amd shpchp i2c_piix4 ext4 mbcache jbd2 sr_mod cdrom sd_mod crc_t10dif sata_svw pata_acpi ata_generic pata_serverworks aacraid radeon ttm drm_kms_helper drm i2c_algo_bit i2c_core dm_mod [last unloaded: freq_table] Pid: 13735, comm: srp_daemon Not tainted 2.6.32-71.el6.x86_64 #1 Call Trace: [<ffffffff8106b857>] warn_slowpath_common+0x87/0xc0 [<ffffffff8106b8aa>] warn_slowpath_null+0x1a/0x20 [<ffffffff8125c39d>] kref_get+0x2d/0x30 [<ffffffffa01b4029>] rdac_bus_attach+0x459/0x580 [scsi_dh_rdac] [<ffffffff8135232a>] scsi_dh_handler_attach+0x2a/0x80 [<ffffffff81352c7b>] scsi_dh_notifier+0x9b/0xa0 [<ffffffff814cd7a5>] notifier_call_chain+0x55/0x80 [<ffffffff8109711a>] __blocking_notifier_call_chain+0x5a/0x80 [<ffffffff81097156>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff8132bec5>] device_add+0x515/0x640 [<ffffffff813329e4>] ? attribute_container_device_trigger+0xc4/0xe0 [<ffffffff8134f659>] scsi_sysfs_add_sdev+0x89/0x2c0 [<ffffffff8134d096>] scsi_probe_and_add_lun+0xea6/0xed0 [<ffffffff8134beb2>] ? scsi_alloc_target+0x292/0x2d0 [<ffffffff8134d1e1>] __scsi_scan_target+0x121/0x750 [<ffffffff811df806>] ? sysfs_create_file+0x26/0x30 [<ffffffff8132b759>] ? device_create_file+0x19/0x20 [<ffffffff81332838>] ? attribute_container_add_attrs+0x78/0x90 [<ffffffff814b008c>] ? klist_next+0x4c/0xf0 [<ffffffff81332e30>] ? transport_configure+0x0/0x20 [<ffffffff813329e4>] ? attribute_container_device_trigger+0xc4/0xe0 [<ffffffff8134df40>] scsi_scan_target+0xd0/0xe0 [<ffffffffa02f053a>] srp_create_target+0x75a/0x890 [ib_srp] [<ffffffff8132a130>] dev_attr_store+0x20/0x30 [<ffffffff811df145>] sysfs_write_file+0xe5/0x170 [<ffffffff8116c818>] vfs_write+0xb8/0x1a0 [<ffffffff810d40a2>] ? audit_syscall_entry+0x272/0x2a0 [<ffffffff8116d251>] sys_write+0x51/0x90 [<ffffffff81013172>] system_call_fastpath+0x16/0x1b Signed-off-by: Babu Moger <babu.moger@netapp.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
		
			
				
	
	
		
			978 lines
		
	
	
	
		
			23 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			978 lines
		
	
	
	
		
			23 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * LSI/Engenio/NetApp E-Series RDAC SCSI Device Handler
 | |
|  *
 | |
|  * Copyright (C) 2005 Mike Christie. All rights reserved.
 | |
|  * Copyright (C) Chandra Seetharaman, IBM Corp. 2007
 | |
|  *
 | |
|  * This program is free software; you can redistribute it and/or modify
 | |
|  * it under the terms of the GNU General Public License as published by
 | |
|  * the Free Software Foundation; either version 2 of the License, or
 | |
|  * (at your option) any later version.
 | |
|  *
 | |
|  * This program is distributed in the hope that it will be useful,
 | |
|  * but WITHOUT ANY WARRANTY; without even the implied warranty of
 | |
|  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 | |
|  * GNU General Public License for more details.
 | |
|  *
 | |
|  * You should have received a copy of the GNU General Public License
 | |
|  * along with this program; if not, write to the Free Software
 | |
|  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
 | |
|  *
 | |
|  */
 | |
| #include <scsi/scsi.h>
 | |
| #include <scsi/scsi_eh.h>
 | |
| #include <scsi/scsi_dh.h>
 | |
| #include <linux/workqueue.h>
 | |
| #include <linux/slab.h>
 | |
| #include <linux/module.h>
 | |
| 
 | |
| #define RDAC_NAME "rdac"
 | |
| #define RDAC_RETRY_COUNT 5
 | |
| 
 | |
| /*
 | |
|  * LSI mode page stuff
 | |
|  *
 | |
|  * These struct definitions and the forming of the
 | |
|  * mode page were taken from the LSI RDAC 2.4 GPL'd
 | |
|  * driver, and then converted to Linux conventions.
 | |
|  */
 | |
| #define RDAC_QUIESCENCE_TIME 20
 | |
| /*
 | |
|  * Page Codes
 | |
|  */
 | |
| #define RDAC_PAGE_CODE_REDUNDANT_CONTROLLER 0x2c
 | |
| 
 | |
| /*
 | |
|  * Controller modes definitions
 | |
|  */
 | |
| #define RDAC_MODE_TRANSFER_SPECIFIED_LUNS	0x02
 | |
| 
 | |
| /*
 | |
|  * RDAC Options field
 | |
|  */
 | |
| #define RDAC_FORCED_QUIESENCE 0x02
 | |
| 
 | |
| #define RDAC_TIMEOUT	(60 * HZ)
 | |
| #define RDAC_RETRIES	3
 | |
| 
 | |
| struct rdac_mode_6_hdr {
 | |
| 	u8	data_len;
 | |
| 	u8	medium_type;
 | |
| 	u8	device_params;
 | |
| 	u8	block_desc_len;
 | |
| };
 | |
| 
 | |
| struct rdac_mode_10_hdr {
 | |
| 	u16	data_len;
 | |
| 	u8	medium_type;
 | |
| 	u8	device_params;
 | |
| 	u16	reserved;
 | |
| 	u16	block_desc_len;
 | |
| };
 | |
| 
 | |
| struct rdac_mode_common {
 | |
| 	u8	controller_serial[16];
 | |
| 	u8	alt_controller_serial[16];
 | |
| 	u8	rdac_mode[2];
 | |
| 	u8	alt_rdac_mode[2];
 | |
| 	u8	quiescence_timeout;
 | |
| 	u8	rdac_options;
 | |
| };
 | |
| 
 | |
| struct rdac_pg_legacy {
 | |
| 	struct rdac_mode_6_hdr hdr;
 | |
| 	u8	page_code;
 | |
| 	u8	page_len;
 | |
| 	struct rdac_mode_common common;
 | |
| #define MODE6_MAX_LUN	32
 | |
| 	u8	lun_table[MODE6_MAX_LUN];
 | |
| 	u8	reserved2[32];
 | |
| 	u8	reserved3;
 | |
| 	u8	reserved4;
 | |
| };
 | |
| 
 | |
| struct rdac_pg_expanded {
 | |
| 	struct rdac_mode_10_hdr hdr;
 | |
| 	u8	page_code;
 | |
| 	u8	subpage_code;
 | |
| 	u8	page_len[2];
 | |
| 	struct rdac_mode_common common;
 | |
| 	u8	lun_table[256];
 | |
| 	u8	reserved3;
 | |
| 	u8	reserved4;
 | |
| };
 | |
| 
 | |
| struct c9_inquiry {
 | |
| 	u8	peripheral_info;
 | |
| 	u8	page_code;	/* 0xC9 */
 | |
| 	u8	reserved1;
 | |
| 	u8	page_len;
 | |
| 	u8	page_id[4];	/* "vace" */
 | |
| 	u8	avte_cvp;
 | |
| 	u8	path_prio;
 | |
| 	u8	reserved2[38];
 | |
| };
 | |
| 
 | |
| #define SUBSYS_ID_LEN	16
 | |
| #define SLOT_ID_LEN	2
 | |
| #define ARRAY_LABEL_LEN	31
 | |
| 
 | |
| struct c4_inquiry {
 | |
| 	u8	peripheral_info;
 | |
| 	u8	page_code;	/* 0xC4 */
 | |
| 	u8	reserved1;
 | |
| 	u8	page_len;
 | |
| 	u8	page_id[4];	/* "subs" */
 | |
| 	u8	subsys_id[SUBSYS_ID_LEN];
 | |
| 	u8	revision[4];
 | |
| 	u8	slot_id[SLOT_ID_LEN];
 | |
| 	u8	reserved[2];
 | |
| };
 | |
| 
 | |
| #define UNIQUE_ID_LEN 16
 | |
| struct c8_inquiry {
 | |
| 	u8	peripheral_info;
 | |
| 	u8	page_code; /* 0xC8 */
 | |
| 	u8	reserved1;
 | |
| 	u8	page_len;
 | |
| 	u8	page_id[4]; /* "edid" */
 | |
| 	u8	reserved2[3];
 | |
| 	u8	vol_uniq_id_len;
 | |
| 	u8	vol_uniq_id[16];
 | |
| 	u8	vol_user_label_len;
 | |
| 	u8	vol_user_label[60];
 | |
| 	u8	array_uniq_id_len;
 | |
| 	u8	array_unique_id[UNIQUE_ID_LEN];
 | |
| 	u8	array_user_label_len;
 | |
| 	u8	array_user_label[60];
 | |
| 	u8	lun[8];
 | |
| };
 | |
| 
 | |
| struct rdac_controller {
 | |
| 	u8			array_id[UNIQUE_ID_LEN];
 | |
| 	int			use_ms10;
 | |
| 	struct kref		kref;
 | |
| 	struct list_head	node; /* list of all controllers */
 | |
| 	union			{
 | |
| 		struct rdac_pg_legacy legacy;
 | |
| 		struct rdac_pg_expanded expanded;
 | |
| 	} mode_select;
 | |
| 	u8	index;
 | |
| 	u8	array_name[ARRAY_LABEL_LEN];
 | |
| 	struct Scsi_Host	*host;
 | |
| 	spinlock_t		ms_lock;
 | |
| 	int			ms_queued;
 | |
| 	struct work_struct	ms_work;
 | |
| 	struct scsi_device	*ms_sdev;
 | |
| 	struct list_head	ms_head;
 | |
| };
 | |
| 
 | |
| struct c2_inquiry {
 | |
| 	u8	peripheral_info;
 | |
| 	u8	page_code;	/* 0xC2 */
 | |
| 	u8	reserved1;
 | |
| 	u8	page_len;
 | |
| 	u8	page_id[4];	/* "swr4" */
 | |
| 	u8	sw_version[3];
 | |
| 	u8	sw_date[3];
 | |
| 	u8	features_enabled;
 | |
| 	u8	max_lun_supported;
 | |
| 	u8	partitions[239]; /* Total allocation length should be 0xFF */
 | |
| };
 | |
| 
 | |
| struct rdac_dh_data {
 | |
| 	struct rdac_controller	*ctlr;
 | |
| #define UNINITIALIZED_LUN	(1 << 8)
 | |
| 	unsigned		lun;
 | |
| 
 | |
| #define RDAC_MODE		0
 | |
| #define RDAC_MODE_AVT		1
 | |
| #define RDAC_MODE_IOSHIP	2
 | |
| 	unsigned char		mode;
 | |
| 
 | |
| #define RDAC_STATE_ACTIVE	0
 | |
| #define RDAC_STATE_PASSIVE	1
 | |
| 	unsigned char		state;
 | |
| 
 | |
| #define RDAC_LUN_UNOWNED	0
 | |
| #define RDAC_LUN_OWNED		1
 | |
| 	char			lun_state;
 | |
| 
 | |
| #define RDAC_PREFERRED		0
 | |
| #define RDAC_NON_PREFERRED	1
 | |
| 	char			preferred;
 | |
| 
 | |
| 	unsigned char		sense[SCSI_SENSE_BUFFERSIZE];
 | |
| 	union			{
 | |
| 		struct c2_inquiry c2;
 | |
| 		struct c4_inquiry c4;
 | |
| 		struct c8_inquiry c8;
 | |
| 		struct c9_inquiry c9;
 | |
| 	} inq;
 | |
| };
 | |
| 
 | |
| static const char *mode[] = {
 | |
| 	"RDAC",
 | |
| 	"AVT",
 | |
| 	"IOSHIP",
 | |
| };
 | |
| static const char *lun_state[] =
 | |
| {
 | |
| 	"unowned",
 | |
| 	"owned",
 | |
| };
 | |
| 
 | |
| struct rdac_queue_data {
 | |
| 	struct list_head	entry;
 | |
| 	struct rdac_dh_data	*h;
 | |
| 	activate_complete	callback_fn;
 | |
| 	void			*callback_data;
 | |
| };
 | |
| 
 | |
| static LIST_HEAD(ctlr_list);
 | |
| static DEFINE_SPINLOCK(list_lock);
 | |
| static struct workqueue_struct *kmpath_rdacd;
 | |
| static void send_mode_select(struct work_struct *work);
 | |
| 
 | |
| /*
 | |
|  * module parameter to enable rdac debug logging.
 | |
|  * 2 bits for each type of logging, only two types defined for now
 | |
|  * Can be enhanced if required at later point
 | |
|  */
 | |
| static int rdac_logging = 1;
 | |
| module_param(rdac_logging, int, S_IRUGO|S_IWUSR);
 | |
| MODULE_PARM_DESC(rdac_logging, "A bit mask of rdac logging levels, "
 | |
| 		"Default is 1 - failover logging enabled, "
 | |
| 		"set it to 0xF to enable all the logs");
 | |
| 
 | |
| #define RDAC_LOG_FAILOVER	0
 | |
| #define RDAC_LOG_SENSE		2
 | |
| 
 | |
| #define RDAC_LOG_BITS		2
 | |
| 
 | |
| #define RDAC_LOG_LEVEL(SHIFT)  \
 | |
| 	((rdac_logging >> (SHIFT)) & ((1 << (RDAC_LOG_BITS)) - 1))
 | |
| 
 | |
| #define RDAC_LOG(SHIFT, sdev, f, arg...) \
 | |
| do { \
 | |
| 	if (unlikely(RDAC_LOG_LEVEL(SHIFT))) \
 | |
| 		sdev_printk(KERN_INFO, sdev, RDAC_NAME ": " f "\n", ## arg); \
 | |
| } while (0);
 | |
| 
 | |
| static inline struct rdac_dh_data *get_rdac_data(struct scsi_device *sdev)
 | |
| {
 | |
| 	struct scsi_dh_data *scsi_dh_data = sdev->scsi_dh_data;
 | |
| 	BUG_ON(scsi_dh_data == NULL);
 | |
| 	return ((struct rdac_dh_data *) scsi_dh_data->buf);
 | |
| }
 | |
| 
 | |
| static struct request *get_rdac_req(struct scsi_device *sdev,
 | |
| 			void *buffer, unsigned buflen, int rw)
 | |
| {
 | |
| 	struct request *rq;
 | |
| 	struct request_queue *q = sdev->request_queue;
 | |
| 
 | |
| 	rq = blk_get_request(q, rw, GFP_NOIO);
 | |
| 
 | |
| 	if (!rq) {
 | |
| 		sdev_printk(KERN_INFO, sdev,
 | |
| 				"get_rdac_req: blk_get_request failed.\n");
 | |
| 		return NULL;
 | |
| 	}
 | |
| 
 | |
| 	if (buflen && blk_rq_map_kern(q, rq, buffer, buflen, GFP_NOIO)) {
 | |
| 		blk_put_request(rq);
 | |
| 		sdev_printk(KERN_INFO, sdev,
 | |
| 				"get_rdac_req: blk_rq_map_kern failed.\n");
 | |
| 		return NULL;
 | |
| 	}
 | |
| 
 | |
| 	rq->cmd_type = REQ_TYPE_BLOCK_PC;
 | |
| 	rq->cmd_flags |= REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT |
 | |
| 			 REQ_FAILFAST_DRIVER;
 | |
| 	rq->retries = RDAC_RETRIES;
 | |
| 	rq->timeout = RDAC_TIMEOUT;
 | |
| 
 | |
| 	return rq;
 | |
| }
 | |
| 
 | |
| static struct request *rdac_failover_get(struct scsi_device *sdev,
 | |
| 			struct rdac_dh_data *h, struct list_head *list)
 | |
| {
 | |
| 	struct request *rq;
 | |
| 	struct rdac_mode_common *common;
 | |
| 	unsigned data_size;
 | |
| 	struct rdac_queue_data *qdata;
 | |
| 	u8 *lun_table;
 | |
| 
 | |
| 	if (h->ctlr->use_ms10) {
 | |
| 		struct rdac_pg_expanded *rdac_pg;
 | |
| 
 | |
| 		data_size = sizeof(struct rdac_pg_expanded);
 | |
| 		rdac_pg = &h->ctlr->mode_select.expanded;
 | |
| 		memset(rdac_pg, 0, data_size);
 | |
| 		common = &rdac_pg->common;
 | |
| 		rdac_pg->page_code = RDAC_PAGE_CODE_REDUNDANT_CONTROLLER + 0x40;
 | |
| 		rdac_pg->subpage_code = 0x1;
 | |
| 		rdac_pg->page_len[0] = 0x01;
 | |
| 		rdac_pg->page_len[1] = 0x28;
 | |
| 		lun_table = rdac_pg->lun_table;
 | |
| 	} else {
 | |
| 		struct rdac_pg_legacy *rdac_pg;
 | |
| 
 | |
| 		data_size = sizeof(struct rdac_pg_legacy);
 | |
| 		rdac_pg = &h->ctlr->mode_select.legacy;
 | |
| 		memset(rdac_pg, 0, data_size);
 | |
| 		common = &rdac_pg->common;
 | |
| 		rdac_pg->page_code = RDAC_PAGE_CODE_REDUNDANT_CONTROLLER;
 | |
| 		rdac_pg->page_len = 0x68;
 | |
| 		lun_table = rdac_pg->lun_table;
 | |
| 	}
 | |
| 	common->rdac_mode[1] = RDAC_MODE_TRANSFER_SPECIFIED_LUNS;
 | |
| 	common->quiescence_timeout = RDAC_QUIESCENCE_TIME;
 | |
| 	common->rdac_options = RDAC_FORCED_QUIESENCE;
 | |
| 
 | |
| 	list_for_each_entry(qdata, list, entry) {
 | |
| 		lun_table[qdata->h->lun] = 0x81;
 | |
| 	}
 | |
| 
 | |
| 	/* get request for block layer packet command */
 | |
| 	rq = get_rdac_req(sdev, &h->ctlr->mode_select, data_size, WRITE);
 | |
| 	if (!rq)
 | |
| 		return NULL;
 | |
| 
 | |
| 	/* Prepare the command. */
 | |
| 	if (h->ctlr->use_ms10) {
 | |
| 		rq->cmd[0] = MODE_SELECT_10;
 | |
| 		rq->cmd[7] = data_size >> 8;
 | |
| 		rq->cmd[8] = data_size & 0xff;
 | |
| 	} else {
 | |
| 		rq->cmd[0] = MODE_SELECT;
 | |
| 		rq->cmd[4] = data_size;
 | |
| 	}
 | |
| 	rq->cmd_len = COMMAND_SIZE(rq->cmd[0]);
 | |
| 
 | |
| 	rq->sense = h->sense;
 | |
| 	memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
 | |
| 	rq->sense_len = 0;
 | |
| 
 | |
| 	return rq;
 | |
| }
 | |
| 
 | |
| static void release_controller(struct kref *kref)
 | |
| {
 | |
| 	struct rdac_controller *ctlr;
 | |
| 	ctlr = container_of(kref, struct rdac_controller, kref);
 | |
| 
 | |
| 	list_del(&ctlr->node);
 | |
| 	kfree(ctlr);
 | |
| }
 | |
| 
 | |
| static struct rdac_controller *get_controller(int index, char *array_name,
 | |
| 			u8 *array_id, struct scsi_device *sdev)
 | |
| {
 | |
| 	struct rdac_controller *ctlr, *tmp;
 | |
| 
 | |
| 	list_for_each_entry(tmp, &ctlr_list, node) {
 | |
| 		if ((memcmp(tmp->array_id, array_id, UNIQUE_ID_LEN) == 0) &&
 | |
| 			  (tmp->index == index) &&
 | |
| 			  (tmp->host == sdev->host)) {
 | |
| 			kref_get(&tmp->kref);
 | |
| 			return tmp;
 | |
| 		}
 | |
| 	}
 | |
| 	ctlr = kmalloc(sizeof(*ctlr), GFP_ATOMIC);
 | |
| 	if (!ctlr)
 | |
| 		return NULL;
 | |
| 
 | |
| 	/* initialize fields of controller */
 | |
| 	memcpy(ctlr->array_id, array_id, UNIQUE_ID_LEN);
 | |
| 	ctlr->index = index;
 | |
| 	ctlr->host = sdev->host;
 | |
| 	memcpy(ctlr->array_name, array_name, ARRAY_LABEL_LEN);
 | |
| 
 | |
| 	kref_init(&ctlr->kref);
 | |
| 	ctlr->use_ms10 = -1;
 | |
| 	ctlr->ms_queued = 0;
 | |
| 	ctlr->ms_sdev = NULL;
 | |
| 	spin_lock_init(&ctlr->ms_lock);
 | |
| 	INIT_WORK(&ctlr->ms_work, send_mode_select);
 | |
| 	INIT_LIST_HEAD(&ctlr->ms_head);
 | |
| 	list_add(&ctlr->node, &ctlr_list);
 | |
| 
 | |
| 	return ctlr;
 | |
| }
 | |
| 
 | |
| static int submit_inquiry(struct scsi_device *sdev, int page_code,
 | |
| 			  unsigned int len, struct rdac_dh_data *h)
 | |
| {
 | |
| 	struct request *rq;
 | |
| 	struct request_queue *q = sdev->request_queue;
 | |
| 	int err = SCSI_DH_RES_TEMP_UNAVAIL;
 | |
| 
 | |
| 	rq = get_rdac_req(sdev, &h->inq, len, READ);
 | |
| 	if (!rq)
 | |
| 		goto done;
 | |
| 
 | |
| 	/* Prepare the command. */
 | |
| 	rq->cmd[0] = INQUIRY;
 | |
| 	rq->cmd[1] = 1;
 | |
| 	rq->cmd[2] = page_code;
 | |
| 	rq->cmd[4] = len;
 | |
| 	rq->cmd_len = COMMAND_SIZE(INQUIRY);
 | |
| 
 | |
| 	rq->sense = h->sense;
 | |
| 	memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
 | |
| 	rq->sense_len = 0;
 | |
| 
 | |
| 	err = blk_execute_rq(q, NULL, rq, 1);
 | |
| 	if (err == -EIO)
 | |
| 		err = SCSI_DH_IO;
 | |
| 
 | |
| 	blk_put_request(rq);
 | |
| done:
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| static int get_lun_info(struct scsi_device *sdev, struct rdac_dh_data *h,
 | |
| 			char *array_name, u8 *array_id)
 | |
| {
 | |
| 	int err, i;
 | |
| 	struct c8_inquiry *inqp;
 | |
| 
 | |
| 	err = submit_inquiry(sdev, 0xC8, sizeof(struct c8_inquiry), h);
 | |
| 	if (err == SCSI_DH_OK) {
 | |
| 		inqp = &h->inq.c8;
 | |
| 		if (inqp->page_code != 0xc8)
 | |
| 			return SCSI_DH_NOSYS;
 | |
| 		if (inqp->page_id[0] != 'e' || inqp->page_id[1] != 'd' ||
 | |
| 		    inqp->page_id[2] != 'i' || inqp->page_id[3] != 'd')
 | |
| 			return SCSI_DH_NOSYS;
 | |
| 		h->lun = inqp->lun[7]; /* Uses only the last byte */
 | |
| 
 | |
| 		for(i=0; i<ARRAY_LABEL_LEN-1; ++i)
 | |
| 			*(array_name+i) = inqp->array_user_label[(2*i)+1];
 | |
| 
 | |
| 		*(array_name+ARRAY_LABEL_LEN-1) = '\0';
 | |
| 		memset(array_id, 0, UNIQUE_ID_LEN);
 | |
| 		memcpy(array_id, inqp->array_unique_id, inqp->array_uniq_id_len);
 | |
| 	}
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| static int check_ownership(struct scsi_device *sdev, struct rdac_dh_data *h)
 | |
| {
 | |
| 	int err;
 | |
| 	struct c9_inquiry *inqp;
 | |
| 
 | |
| 	h->state = RDAC_STATE_ACTIVE;
 | |
| 	err = submit_inquiry(sdev, 0xC9, sizeof(struct c9_inquiry), h);
 | |
| 	if (err == SCSI_DH_OK) {
 | |
| 		inqp = &h->inq.c9;
 | |
| 		/* detect the operating mode */
 | |
| 		if ((inqp->avte_cvp >> 5) & 0x1)
 | |
| 			h->mode = RDAC_MODE_IOSHIP; /* LUN in IOSHIP mode */
 | |
| 		else if (inqp->avte_cvp >> 7)
 | |
| 			h->mode = RDAC_MODE_AVT; /* LUN in AVT mode */
 | |
| 		else
 | |
| 			h->mode = RDAC_MODE; /* LUN in RDAC mode */
 | |
| 
 | |
| 		/* Update ownership */
 | |
| 		if (inqp->avte_cvp & 0x1)
 | |
| 			h->lun_state = RDAC_LUN_OWNED;
 | |
| 		else {
 | |
| 			h->lun_state = RDAC_LUN_UNOWNED;
 | |
| 			if (h->mode == RDAC_MODE)
 | |
| 				h->state = RDAC_STATE_PASSIVE;
 | |
| 		}
 | |
| 
 | |
| 		/* Update path prio*/
 | |
| 		if (inqp->path_prio & 0x1)
 | |
| 			h->preferred = RDAC_PREFERRED;
 | |
| 		else
 | |
| 			h->preferred = RDAC_NON_PREFERRED;
 | |
| 	}
 | |
| 
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| static int initialize_controller(struct scsi_device *sdev,
 | |
| 		struct rdac_dh_data *h, char *array_name, u8 *array_id)
 | |
| {
 | |
| 	int err, index;
 | |
| 	struct c4_inquiry *inqp;
 | |
| 
 | |
| 	err = submit_inquiry(sdev, 0xC4, sizeof(struct c4_inquiry), h);
 | |
| 	if (err == SCSI_DH_OK) {
 | |
| 		inqp = &h->inq.c4;
 | |
| 		/* get the controller index */
 | |
| 		if (inqp->slot_id[1] == 0x31)
 | |
| 			index = 0;
 | |
| 		else
 | |
| 			index = 1;
 | |
| 
 | |
| 		spin_lock(&list_lock);
 | |
| 		h->ctlr = get_controller(index, array_name, array_id, sdev);
 | |
| 		if (!h->ctlr)
 | |
| 			err = SCSI_DH_RES_TEMP_UNAVAIL;
 | |
| 		spin_unlock(&list_lock);
 | |
| 	}
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| static int set_mode_select(struct scsi_device *sdev, struct rdac_dh_data *h)
 | |
| {
 | |
| 	int err;
 | |
| 	struct c2_inquiry *inqp;
 | |
| 
 | |
| 	err = submit_inquiry(sdev, 0xC2, sizeof(struct c2_inquiry), h);
 | |
| 	if (err == SCSI_DH_OK) {
 | |
| 		inqp = &h->inq.c2;
 | |
| 		/*
 | |
| 		 * If more than MODE6_MAX_LUN luns are supported, use
 | |
| 		 * mode select 10
 | |
| 		 */
 | |
| 		if (inqp->max_lun_supported >= MODE6_MAX_LUN)
 | |
| 			h->ctlr->use_ms10 = 1;
 | |
| 		else
 | |
| 			h->ctlr->use_ms10 = 0;
 | |
| 	}
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| static int mode_select_handle_sense(struct scsi_device *sdev,
 | |
| 					unsigned char *sensebuf)
 | |
| {
 | |
| 	struct scsi_sense_hdr sense_hdr;
 | |
| 	int err = SCSI_DH_IO, ret;
 | |
| 	struct rdac_dh_data *h = get_rdac_data(sdev);
 | |
| 
 | |
| 	ret = scsi_normalize_sense(sensebuf, SCSI_SENSE_BUFFERSIZE, &sense_hdr);
 | |
| 	if (!ret)
 | |
| 		goto done;
 | |
| 
 | |
| 	switch (sense_hdr.sense_key) {
 | |
| 	case NO_SENSE:
 | |
| 	case ABORTED_COMMAND:
 | |
| 	case UNIT_ATTENTION:
 | |
| 		err = SCSI_DH_RETRY;
 | |
| 		break;
 | |
| 	case NOT_READY:
 | |
| 		if (sense_hdr.asc == 0x04 && sense_hdr.ascq == 0x01)
 | |
| 			/* LUN Not Ready and is in the Process of Becoming
 | |
| 			 * Ready
 | |
| 			 */
 | |
| 			err = SCSI_DH_RETRY;
 | |
| 		break;
 | |
| 	case ILLEGAL_REQUEST:
 | |
| 		if (sense_hdr.asc == 0x91 && sense_hdr.ascq == 0x36)
 | |
| 			/*
 | |
| 			 * Command Lock contention
 | |
| 			 */
 | |
| 			err = SCSI_DH_RETRY;
 | |
| 		break;
 | |
| 	default:
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	RDAC_LOG(RDAC_LOG_FAILOVER, sdev, "array %s, ctlr %d, "
 | |
| 		"MODE_SELECT returned with sense %02x/%02x/%02x",
 | |
| 		(char *) h->ctlr->array_name, h->ctlr->index,
 | |
| 		sense_hdr.sense_key, sense_hdr.asc, sense_hdr.ascq);
 | |
| 
 | |
| done:
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| static void send_mode_select(struct work_struct *work)
 | |
| {
 | |
| 	struct rdac_controller *ctlr =
 | |
| 		container_of(work, struct rdac_controller, ms_work);
 | |
| 	struct request *rq;
 | |
| 	struct scsi_device *sdev = ctlr->ms_sdev;
 | |
| 	struct rdac_dh_data *h = get_rdac_data(sdev);
 | |
| 	struct request_queue *q = sdev->request_queue;
 | |
| 	int err, retry_cnt = RDAC_RETRY_COUNT;
 | |
| 	struct rdac_queue_data *tmp, *qdata;
 | |
| 	LIST_HEAD(list);
 | |
| 
 | |
| 	spin_lock(&ctlr->ms_lock);
 | |
| 	list_splice_init(&ctlr->ms_head, &list);
 | |
| 	ctlr->ms_queued = 0;
 | |
| 	ctlr->ms_sdev = NULL;
 | |
| 	spin_unlock(&ctlr->ms_lock);
 | |
| 
 | |
| retry:
 | |
| 	err = SCSI_DH_RES_TEMP_UNAVAIL;
 | |
| 	rq = rdac_failover_get(sdev, h, &list);
 | |
| 	if (!rq)
 | |
| 		goto done;
 | |
| 
 | |
| 	RDAC_LOG(RDAC_LOG_FAILOVER, sdev, "array %s, ctlr %d, "
 | |
| 		"%s MODE_SELECT command",
 | |
| 		(char *) h->ctlr->array_name, h->ctlr->index,
 | |
| 		(retry_cnt == RDAC_RETRY_COUNT) ? "queueing" : "retrying");
 | |
| 
 | |
| 	err = blk_execute_rq(q, NULL, rq, 1);
 | |
| 	blk_put_request(rq);
 | |
| 	if (err != SCSI_DH_OK) {
 | |
| 		err = mode_select_handle_sense(sdev, h->sense);
 | |
| 		if (err == SCSI_DH_RETRY && retry_cnt--)
 | |
| 			goto retry;
 | |
| 	}
 | |
| 	if (err == SCSI_DH_OK) {
 | |
| 		h->state = RDAC_STATE_ACTIVE;
 | |
| 		RDAC_LOG(RDAC_LOG_FAILOVER, sdev, "array %s, ctlr %d, "
 | |
| 				"MODE_SELECT completed",
 | |
| 				(char *) h->ctlr->array_name, h->ctlr->index);
 | |
| 	}
 | |
| 
 | |
| done:
 | |
| 	list_for_each_entry_safe(qdata, tmp, &list, entry) {
 | |
| 		list_del(&qdata->entry);
 | |
| 		if (err == SCSI_DH_OK)
 | |
| 			qdata->h->state = RDAC_STATE_ACTIVE;
 | |
| 		if (qdata->callback_fn)
 | |
| 			qdata->callback_fn(qdata->callback_data, err);
 | |
| 		kfree(qdata);
 | |
| 	}
 | |
| 	return;
 | |
| }
 | |
| 
 | |
| static int queue_mode_select(struct scsi_device *sdev,
 | |
| 				activate_complete fn, void *data)
 | |
| {
 | |
| 	struct rdac_queue_data *qdata;
 | |
| 	struct rdac_controller *ctlr;
 | |
| 
 | |
| 	qdata = kzalloc(sizeof(*qdata), GFP_KERNEL);
 | |
| 	if (!qdata)
 | |
| 		return SCSI_DH_RETRY;
 | |
| 
 | |
| 	qdata->h = get_rdac_data(sdev);
 | |
| 	qdata->callback_fn = fn;
 | |
| 	qdata->callback_data = data;
 | |
| 
 | |
| 	ctlr = qdata->h->ctlr;
 | |
| 	spin_lock(&ctlr->ms_lock);
 | |
| 	list_add_tail(&qdata->entry, &ctlr->ms_head);
 | |
| 	if (!ctlr->ms_queued) {
 | |
| 		ctlr->ms_queued = 1;
 | |
| 		ctlr->ms_sdev = sdev;
 | |
| 		queue_work(kmpath_rdacd, &ctlr->ms_work);
 | |
| 	}
 | |
| 	spin_unlock(&ctlr->ms_lock);
 | |
| 	return SCSI_DH_OK;
 | |
| }
 | |
| 
 | |
| static int rdac_activate(struct scsi_device *sdev,
 | |
| 			activate_complete fn, void *data)
 | |
| {
 | |
| 	struct rdac_dh_data *h = get_rdac_data(sdev);
 | |
| 	int err = SCSI_DH_OK;
 | |
| 	int act = 0;
 | |
| 
 | |
| 	err = check_ownership(sdev, h);
 | |
| 	if (err != SCSI_DH_OK)
 | |
| 		goto done;
 | |
| 
 | |
| 	switch (h->mode) {
 | |
| 	case RDAC_MODE:
 | |
| 		if (h->lun_state == RDAC_LUN_UNOWNED)
 | |
| 			act = 1;
 | |
| 		break;
 | |
| 	case RDAC_MODE_IOSHIP:
 | |
| 		if ((h->lun_state == RDAC_LUN_UNOWNED) &&
 | |
| 		    (h->preferred == RDAC_PREFERRED))
 | |
| 			act = 1;
 | |
| 		break;
 | |
| 	default:
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	if (act) {
 | |
| 		err = queue_mode_select(sdev, fn, data);
 | |
| 		if (err == SCSI_DH_OK)
 | |
| 			return 0;
 | |
| 	}
 | |
| done:
 | |
| 	if (fn)
 | |
| 		fn(data, err);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int rdac_prep_fn(struct scsi_device *sdev, struct request *req)
 | |
| {
 | |
| 	struct rdac_dh_data *h = get_rdac_data(sdev);
 | |
| 	int ret = BLKPREP_OK;
 | |
| 
 | |
| 	if (h->state != RDAC_STATE_ACTIVE) {
 | |
| 		ret = BLKPREP_KILL;
 | |
| 		req->cmd_flags |= REQ_QUIET;
 | |
| 	}
 | |
| 	return ret;
 | |
| 
 | |
| }
 | |
| 
 | |
| static int rdac_check_sense(struct scsi_device *sdev,
 | |
| 				struct scsi_sense_hdr *sense_hdr)
 | |
| {
 | |
| 	struct rdac_dh_data *h = get_rdac_data(sdev);
 | |
| 
 | |
| 	RDAC_LOG(RDAC_LOG_SENSE, sdev, "array %s, ctlr %d, "
 | |
| 			"I/O returned with sense %02x/%02x/%02x",
 | |
| 			(char *) h->ctlr->array_name, h->ctlr->index,
 | |
| 			sense_hdr->sense_key, sense_hdr->asc, sense_hdr->ascq);
 | |
| 
 | |
| 	switch (sense_hdr->sense_key) {
 | |
| 	case NOT_READY:
 | |
| 		if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x01)
 | |
| 			/* LUN Not Ready - Logical Unit Not Ready and is in
 | |
| 			* the process of becoming ready
 | |
| 			* Just retry.
 | |
| 			*/
 | |
| 			return ADD_TO_MLQUEUE;
 | |
| 		if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x81)
 | |
| 			/* LUN Not Ready - Storage firmware incompatible
 | |
| 			 * Manual code synchonisation required.
 | |
| 			 *
 | |
| 			 * Nothing we can do here. Try to bypass the path.
 | |
| 			 */
 | |
| 			return SUCCESS;
 | |
| 		if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0xA1)
 | |
| 			/* LUN Not Ready - Quiescense in progress
 | |
| 			 *
 | |
| 			 * Just retry and wait.
 | |
| 			 */
 | |
| 			return ADD_TO_MLQUEUE;
 | |
| 		if (sense_hdr->asc == 0xA1  && sense_hdr->ascq == 0x02)
 | |
| 			/* LUN Not Ready - Quiescense in progress
 | |
| 			 * or has been achieved
 | |
| 			 * Just retry.
 | |
| 			 */
 | |
| 			return ADD_TO_MLQUEUE;
 | |
| 		break;
 | |
| 	case ILLEGAL_REQUEST:
 | |
| 		if (sense_hdr->asc == 0x94 && sense_hdr->ascq == 0x01) {
 | |
| 			/* Invalid Request - Current Logical Unit Ownership.
 | |
| 			 * Controller is not the current owner of the LUN,
 | |
| 			 * Fail the path, so that the other path be used.
 | |
| 			 */
 | |
| 			h->state = RDAC_STATE_PASSIVE;
 | |
| 			return SUCCESS;
 | |
| 		}
 | |
| 		break;
 | |
| 	case UNIT_ATTENTION:
 | |
| 		if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x00)
 | |
| 			/*
 | |
| 			 * Power On, Reset, or Bus Device Reset, just retry.
 | |
| 			 */
 | |
| 			return ADD_TO_MLQUEUE;
 | |
| 		if (sense_hdr->asc == 0x8b && sense_hdr->ascq == 0x02)
 | |
| 			/*
 | |
| 			 * Quiescence in progress , just retry.
 | |
| 			 */
 | |
| 			return ADD_TO_MLQUEUE;
 | |
| 		break;
 | |
| 	}
 | |
| 	/* success just means we do not care what scsi-ml does */
 | |
| 	return SCSI_RETURN_NOT_HANDLED;
 | |
| }
 | |
| 
 | |
| static const struct scsi_dh_devlist rdac_dev_list[] = {
 | |
| 	{"IBM", "1722"},
 | |
| 	{"IBM", "1724"},
 | |
| 	{"IBM", "1726"},
 | |
| 	{"IBM", "1742"},
 | |
| 	{"IBM", "1745"},
 | |
| 	{"IBM", "1746"},
 | |
| 	{"IBM", "1814"},
 | |
| 	{"IBM", "1815"},
 | |
| 	{"IBM", "1818"},
 | |
| 	{"IBM", "3526"},
 | |
| 	{"SGI", "TP9400"},
 | |
| 	{"SGI", "TP9500"},
 | |
| 	{"SGI", "TP9700"},
 | |
| 	{"SGI", "IS"},
 | |
| 	{"STK", "OPENstorage D280"},
 | |
| 	{"SUN", "CSM200_R"},
 | |
| 	{"SUN", "LCSM100_I"},
 | |
| 	{"SUN", "LCSM100_S"},
 | |
| 	{"SUN", "LCSM100_E"},
 | |
| 	{"SUN", "LCSM100_F"},
 | |
| 	{"DELL", "MD3000"},
 | |
| 	{"DELL", "MD3000i"},
 | |
| 	{"DELL", "MD32xx"},
 | |
| 	{"DELL", "MD32xxi"},
 | |
| 	{"DELL", "MD36xxi"},
 | |
| 	{"DELL", "MD36xxf"},
 | |
| 	{"LSI", "INF-01-00"},
 | |
| 	{"ENGENIO", "INF-01-00"},
 | |
| 	{"STK", "FLEXLINE 380"},
 | |
| 	{"SUN", "CSM100_R_FC"},
 | |
| 	{"SUN", "STK6580_6780"},
 | |
| 	{"SUN", "SUN_6180"},
 | |
| 	{"SUN", "ArrayStorage"},
 | |
| 	{NULL, NULL},
 | |
| };
 | |
| 
 | |
| static bool rdac_match(struct scsi_device *sdev)
 | |
| {
 | |
| 	int i;
 | |
| 
 | |
| 	if (scsi_device_tpgs(sdev))
 | |
| 		return false;
 | |
| 
 | |
| 	for (i = 0; rdac_dev_list[i].vendor; i++) {
 | |
| 		if (!strncmp(sdev->vendor, rdac_dev_list[i].vendor,
 | |
| 			strlen(rdac_dev_list[i].vendor)) &&
 | |
| 		    !strncmp(sdev->model, rdac_dev_list[i].model,
 | |
| 			strlen(rdac_dev_list[i].model))) {
 | |
| 			return true;
 | |
| 		}
 | |
| 	}
 | |
| 	return false;
 | |
| }
 | |
| 
 | |
| static int rdac_bus_attach(struct scsi_device *sdev);
 | |
| static void rdac_bus_detach(struct scsi_device *sdev);
 | |
| 
 | |
| static struct scsi_device_handler rdac_dh = {
 | |
| 	.name = RDAC_NAME,
 | |
| 	.module = THIS_MODULE,
 | |
| 	.devlist = rdac_dev_list,
 | |
| 	.prep_fn = rdac_prep_fn,
 | |
| 	.check_sense = rdac_check_sense,
 | |
| 	.attach = rdac_bus_attach,
 | |
| 	.detach = rdac_bus_detach,
 | |
| 	.activate = rdac_activate,
 | |
| 	.match = rdac_match,
 | |
| };
 | |
| 
 | |
| static int rdac_bus_attach(struct scsi_device *sdev)
 | |
| {
 | |
| 	struct scsi_dh_data *scsi_dh_data;
 | |
| 	struct rdac_dh_data *h;
 | |
| 	unsigned long flags;
 | |
| 	int err;
 | |
| 	char array_name[ARRAY_LABEL_LEN];
 | |
| 	char array_id[UNIQUE_ID_LEN];
 | |
| 
 | |
| 	scsi_dh_data = kzalloc(sizeof(*scsi_dh_data)
 | |
| 			       + sizeof(*h) , GFP_KERNEL);
 | |
| 	if (!scsi_dh_data) {
 | |
| 		sdev_printk(KERN_ERR, sdev, "%s: Attach failed\n",
 | |
| 			    RDAC_NAME);
 | |
| 		return 0;
 | |
| 	}
 | |
| 
 | |
| 	scsi_dh_data->scsi_dh = &rdac_dh;
 | |
| 	h = (struct rdac_dh_data *) scsi_dh_data->buf;
 | |
| 	h->lun = UNINITIALIZED_LUN;
 | |
| 	h->state = RDAC_STATE_ACTIVE;
 | |
| 
 | |
| 	err = get_lun_info(sdev, h, array_name, array_id);
 | |
| 	if (err != SCSI_DH_OK)
 | |
| 		goto failed;
 | |
| 
 | |
| 	err = initialize_controller(sdev, h, array_name, array_id);
 | |
| 	if (err != SCSI_DH_OK)
 | |
| 		goto failed;
 | |
| 
 | |
| 	err = check_ownership(sdev, h);
 | |
| 	if (err != SCSI_DH_OK)
 | |
| 		goto clean_ctlr;
 | |
| 
 | |
| 	err = set_mode_select(sdev, h);
 | |
| 	if (err != SCSI_DH_OK)
 | |
| 		goto clean_ctlr;
 | |
| 
 | |
| 	if (!try_module_get(THIS_MODULE))
 | |
| 		goto clean_ctlr;
 | |
| 
 | |
| 	spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
 | |
| 	sdev->scsi_dh_data = scsi_dh_data;
 | |
| 	spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
 | |
| 
 | |
| 	sdev_printk(KERN_NOTICE, sdev,
 | |
| 		    "%s: LUN %d (%s) (%s)\n",
 | |
| 		    RDAC_NAME, h->lun, mode[(int)h->mode],
 | |
| 		    lun_state[(int)h->lun_state]);
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| clean_ctlr:
 | |
| 	spin_lock(&list_lock);
 | |
| 	kref_put(&h->ctlr->kref, release_controller);
 | |
| 	spin_unlock(&list_lock);
 | |
| 
 | |
| failed:
 | |
| 	kfree(scsi_dh_data);
 | |
| 	sdev_printk(KERN_ERR, sdev, "%s: not attached\n",
 | |
| 		    RDAC_NAME);
 | |
| 	return -EINVAL;
 | |
| }
 | |
| 
 | |
| static void rdac_bus_detach( struct scsi_device *sdev )
 | |
| {
 | |
| 	struct scsi_dh_data *scsi_dh_data;
 | |
| 	struct rdac_dh_data *h;
 | |
| 	unsigned long flags;
 | |
| 
 | |
| 	scsi_dh_data = sdev->scsi_dh_data;
 | |
| 	h = (struct rdac_dh_data *) scsi_dh_data->buf;
 | |
| 	if (h->ctlr && h->ctlr->ms_queued)
 | |
| 		flush_workqueue(kmpath_rdacd);
 | |
| 
 | |
| 	spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
 | |
| 	sdev->scsi_dh_data = NULL;
 | |
| 	spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
 | |
| 
 | |
| 	spin_lock(&list_lock);
 | |
| 	if (h->ctlr)
 | |
| 		kref_put(&h->ctlr->kref, release_controller);
 | |
| 	spin_unlock(&list_lock);
 | |
| 	kfree(scsi_dh_data);
 | |
| 	module_put(THIS_MODULE);
 | |
| 	sdev_printk(KERN_NOTICE, sdev, "%s: Detached\n", RDAC_NAME);
 | |
| }
 | |
| 
 | |
| 
 | |
| 
 | |
| static int __init rdac_init(void)
 | |
| {
 | |
| 	int r;
 | |
| 
 | |
| 	r = scsi_register_device_handler(&rdac_dh);
 | |
| 	if (r != 0) {
 | |
| 		printk(KERN_ERR "Failed to register scsi device handler.");
 | |
| 		goto done;
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * Create workqueue to handle mode selects for rdac
 | |
| 	 */
 | |
| 	kmpath_rdacd = create_singlethread_workqueue("kmpath_rdacd");
 | |
| 	if (!kmpath_rdacd) {
 | |
| 		scsi_unregister_device_handler(&rdac_dh);
 | |
| 		printk(KERN_ERR "kmpath_rdacd creation failed.\n");
 | |
| 
 | |
| 		r = -EINVAL;
 | |
| 	}
 | |
| done:
 | |
| 	return r;
 | |
| }
 | |
| 
 | |
| static void __exit rdac_exit(void)
 | |
| {
 | |
| 	destroy_workqueue(kmpath_rdacd);
 | |
| 	scsi_unregister_device_handler(&rdac_dh);
 | |
| }
 | |
| 
 | |
| module_init(rdac_init);
 | |
| module_exit(rdac_exit);
 | |
| 
 | |
| MODULE_DESCRIPTION("Multipath LSI/Engenio/NetApp E-Series RDAC driver");
 | |
| MODULE_AUTHOR("Mike Christie, Chandra Seetharaman");
 | |
| MODULE_VERSION("01.00.0000.0000");
 | |
| MODULE_LICENSE("GPL");
 |