 488bf314bf
			
		
	
	
	488bf314bf
	
	
	
		
			
			Currently, if an i2c bus driver supports both static and dynamic bus ids, it needs to choose between calling i2c_add_numbered_adapter() and i2c_add_adapter(). This patch makes i2c_add_numbered_adapter() redirect to i2c_add_adapter() if the requested bus id is -1. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Jean Delvare <khali@linux-fr.org>
		
			
				
	
	
		
			404 lines
		
	
	
	
		
			11 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			404 lines
		
	
	
	
		
			11 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * drivers/i2c/busses/i2c-s6000.c
 | |
|  *
 | |
|  * Description: Driver for S6000 Family I2C Interface
 | |
|  * Copyright (c) 2008 emlix GmbH
 | |
|  * Author:	Oskar Schirmer <os@emlix.com>
 | |
|  *
 | |
|  * Partially based on i2c-bfin-twi.c driver by <sonic.zhang@analog.com>
 | |
|  * Copyright (c) 2005-2007 Analog Devices, Inc.
 | |
|  *
 | |
|  * This program is free software; you can redistribute it and/or modify
 | |
|  * it under the terms of the GNU General Public License as published by
 | |
|  * the Free Software Foundation; either version 2 of the License, or
 | |
|  * (at your option) any later version.
 | |
|  *
 | |
|  * This program is distributed in the hope that it will be useful,
 | |
|  * but WITHOUT ANY WARRANTY; without even the implied warranty of
 | |
|  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 | |
|  * GNU General Public License for more details.
 | |
|  *
 | |
|  * You should have received a copy of the GNU General Public License
 | |
|  * along with this program; if not, write to the Free Software
 | |
|  * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA
 | |
|  */
 | |
| 
 | |
| #include <linux/clk.h>
 | |
| #include <linux/err.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/kernel.h>
 | |
| #include <linux/init.h>
 | |
| #include <linux/delay.h>
 | |
| #include <linux/i2c.h>
 | |
| #include <linux/i2c/s6000.h>
 | |
| #include <linux/timer.h>
 | |
| #include <linux/spinlock.h>
 | |
| #include <linux/completion.h>
 | |
| #include <linux/interrupt.h>
 | |
| #include <linux/platform_device.h>
 | |
| #include <linux/io.h>
 | |
| 
 | |
| #include "i2c-s6000.h"
 | |
| 
 | |
| #define DRV_NAME "i2c-s6000"
 | |
| 
 | |
| #define POLL_TIMEOUT	(2 * HZ)
 | |
| 
 | |
| struct s6i2c_if {
 | |
| 	u8 __iomem		*reg; /* memory mapped registers */
 | |
| 	int			irq;
 | |
| 	spinlock_t		lock;
 | |
| 	struct i2c_msg		*msgs; /* messages currently handled */
 | |
| 	int			msgs_num; /* nb of msgs to do */
 | |
| 	int			msgs_push; /* nb of msgs read/written */
 | |
| 	int			msgs_done; /* nb of msgs finally handled */
 | |
| 	unsigned		push; /* nb of bytes read/written in msg */
 | |
| 	unsigned		done; /* nb of bytes finally handled */
 | |
| 	int			timeout_count; /* timeout retries left */
 | |
| 	struct timer_list	timeout_timer;
 | |
| 	struct i2c_adapter	adap;
 | |
| 	struct completion	complete;
 | |
| 	struct clk		*clk;
 | |
| 	struct resource		*res;
 | |
| };
 | |
| 
 | |
| static inline u16 i2c_rd16(struct s6i2c_if *iface, unsigned n)
 | |
| {
 | |
| 	return readw(iface->reg + (n));
 | |
| }
 | |
| 
 | |
| static inline void i2c_wr16(struct s6i2c_if *iface, unsigned n, u16 v)
 | |
| {
 | |
| 	writew(v, iface->reg + (n));
 | |
| }
 | |
| 
 | |
| static inline u32 i2c_rd32(struct s6i2c_if *iface, unsigned n)
 | |
| {
 | |
| 	return readl(iface->reg + (n));
 | |
| }
 | |
| 
 | |
| static inline void i2c_wr32(struct s6i2c_if *iface, unsigned n, u32 v)
 | |
| {
 | |
| 	writel(v, iface->reg + (n));
 | |
| }
 | |
| 
 | |
| static struct s6i2c_if s6i2c_if;
 | |
| 
 | |
| static void s6i2c_handle_interrupt(struct s6i2c_if *iface)
 | |
| {
 | |
| 	if (i2c_rd16(iface, S6_I2C_INTRSTAT) & (1 << S6_I2C_INTR_TXABRT)) {
 | |
| 		i2c_rd16(iface, S6_I2C_CLRTXABRT);
 | |
| 		i2c_wr16(iface, S6_I2C_INTRMASK, 0);
 | |
| 		complete(&iface->complete);
 | |
| 		return;
 | |
| 	}
 | |
| 	if (iface->msgs_done >= iface->msgs_num) {
 | |
| 		dev_err(&iface->adap.dev, "s6i2c: spurious I2C irq: %04x\n",
 | |
| 			i2c_rd16(iface, S6_I2C_INTRSTAT));
 | |
| 		i2c_wr16(iface, S6_I2C_INTRMASK, 0);
 | |
| 		return;
 | |
| 	}
 | |
| 	while ((iface->msgs_push < iface->msgs_num)
 | |
| 	    && (i2c_rd16(iface, S6_I2C_STATUS) & (1 << S6_I2C_STATUS_TFNF))) {
 | |
| 		struct i2c_msg *m = &iface->msgs[iface->msgs_push];
 | |
| 		if (!(m->flags & I2C_M_RD))
 | |
| 			i2c_wr16(iface, S6_I2C_DATACMD, m->buf[iface->push]);
 | |
| 		else
 | |
| 			i2c_wr16(iface, S6_I2C_DATACMD,
 | |
| 				 1 << S6_I2C_DATACMD_READ);
 | |
| 		if (++iface->push >= m->len) {
 | |
| 			iface->push = 0;
 | |
| 			iface->msgs_push += 1;
 | |
| 		}
 | |
| 	}
 | |
| 	do {
 | |
| 		struct i2c_msg *m = &iface->msgs[iface->msgs_done];
 | |
| 		if (!(m->flags & I2C_M_RD)) {
 | |
| 			if (iface->msgs_done < iface->msgs_push)
 | |
| 				iface->msgs_done += 1;
 | |
| 			else
 | |
| 				break;
 | |
| 		} else if (i2c_rd16(iface, S6_I2C_STATUS)
 | |
| 				& (1 << S6_I2C_STATUS_RFNE)) {
 | |
| 			m->buf[iface->done] = i2c_rd16(iface, S6_I2C_DATACMD);
 | |
| 			if (++iface->done >= m->len) {
 | |
| 				iface->done = 0;
 | |
| 				iface->msgs_done += 1;
 | |
| 			}
 | |
| 		} else{
 | |
| 			break;
 | |
| 		}
 | |
| 	} while (iface->msgs_done < iface->msgs_num);
 | |
| 	if (iface->msgs_done >= iface->msgs_num) {
 | |
| 		i2c_wr16(iface, S6_I2C_INTRMASK, 1 << S6_I2C_INTR_TXABRT);
 | |
| 		complete(&iface->complete);
 | |
| 	} else if (iface->msgs_push >= iface->msgs_num) {
 | |
| 		i2c_wr16(iface, S6_I2C_INTRMASK, (1 << S6_I2C_INTR_TXABRT) |
 | |
| 						 (1 << S6_I2C_INTR_RXFULL));
 | |
| 	} else {
 | |
| 		i2c_wr16(iface, S6_I2C_INTRMASK, (1 << S6_I2C_INTR_TXABRT) |
 | |
| 						 (1 << S6_I2C_INTR_TXEMPTY) |
 | |
| 						 (1 << S6_I2C_INTR_RXFULL));
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static irqreturn_t s6i2c_interrupt_entry(int irq, void *dev_id)
 | |
| {
 | |
| 	struct s6i2c_if *iface = dev_id;
 | |
| 	if (!(i2c_rd16(iface, S6_I2C_STATUS) & ((1 << S6_I2C_INTR_RXUNDER)
 | |
| 					      | (1 << S6_I2C_INTR_RXOVER)
 | |
| 					      | (1 << S6_I2C_INTR_RXFULL)
 | |
| 					      | (1 << S6_I2C_INTR_TXOVER)
 | |
| 					      | (1 << S6_I2C_INTR_TXEMPTY)
 | |
| 					      | (1 << S6_I2C_INTR_RDREQ)
 | |
| 					      | (1 << S6_I2C_INTR_TXABRT)
 | |
| 					      | (1 << S6_I2C_INTR_RXDONE)
 | |
| 					      | (1 << S6_I2C_INTR_ACTIVITY)
 | |
| 					      | (1 << S6_I2C_INTR_STOPDET)
 | |
| 					      | (1 << S6_I2C_INTR_STARTDET)
 | |
| 					      | (1 << S6_I2C_INTR_GENCALL))))
 | |
| 		return IRQ_NONE;
 | |
| 
 | |
| 	spin_lock(&iface->lock);
 | |
| 	del_timer(&iface->timeout_timer);
 | |
| 	s6i2c_handle_interrupt(iface);
 | |
| 	spin_unlock(&iface->lock);
 | |
| 	return IRQ_HANDLED;
 | |
| }
 | |
| 
 | |
| static void s6i2c_timeout(unsigned long data)
 | |
| {
 | |
| 	struct s6i2c_if *iface = (struct s6i2c_if *)data;
 | |
| 	unsigned long flags;
 | |
| 
 | |
| 	spin_lock_irqsave(&iface->lock, flags);
 | |
| 	s6i2c_handle_interrupt(iface);
 | |
| 	if (--iface->timeout_count > 0) {
 | |
| 		iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
 | |
| 		add_timer(&iface->timeout_timer);
 | |
| 	} else {
 | |
| 		complete(&iface->complete);
 | |
| 		i2c_wr16(iface, S6_I2C_INTRMASK, 0);
 | |
| 	}
 | |
| 	spin_unlock_irqrestore(&iface->lock, flags);
 | |
| }
 | |
| 
 | |
| static int s6i2c_master_xfer(struct i2c_adapter *adap,
 | |
| 				struct i2c_msg *msgs, int num)
 | |
| {
 | |
| 	struct s6i2c_if *iface = adap->algo_data;
 | |
| 	int i;
 | |
| 	if (num == 0)
 | |
| 		return 0;
 | |
| 	if (i2c_rd16(iface, S6_I2C_STATUS) & (1 << S6_I2C_STATUS_ACTIVITY))
 | |
| 		yield();
 | |
| 	i2c_wr16(iface, S6_I2C_INTRMASK, 0);
 | |
| 	i2c_rd16(iface, S6_I2C_CLRINTR);
 | |
| 	for (i = 0; i < num; i++) {
 | |
| 		if (msgs[i].flags & I2C_M_TEN) {
 | |
| 			dev_err(&adap->dev,
 | |
| 				"s6i2c: 10 bits addr not supported\n");
 | |
| 			return -EINVAL;
 | |
| 		}
 | |
| 		if (msgs[i].len == 0) {
 | |
| 			dev_err(&adap->dev,
 | |
| 				"s6i2c: zero length message not supported\n");
 | |
| 			return -EINVAL;
 | |
| 		}
 | |
| 		if (msgs[i].addr != msgs[0].addr) {
 | |
| 			dev_err(&adap->dev,
 | |
| 				"s6i2c: multiple xfer cannot change target\n");
 | |
| 			return -EINVAL;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	iface->msgs = msgs;
 | |
| 	iface->msgs_num = num;
 | |
| 	iface->msgs_push = 0;
 | |
| 	iface->msgs_done = 0;
 | |
| 	iface->push = 0;
 | |
| 	iface->done = 0;
 | |
| 	iface->timeout_count = 10;
 | |
| 	i2c_wr16(iface, S6_I2C_TAR, msgs[0].addr);
 | |
| 	i2c_wr16(iface, S6_I2C_ENABLE, 1);
 | |
| 	i2c_wr16(iface, S6_I2C_INTRMASK, (1 << S6_I2C_INTR_TXEMPTY) |
 | |
| 					 (1 << S6_I2C_INTR_TXABRT));
 | |
| 
 | |
| 	iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
 | |
| 	add_timer(&iface->timeout_timer);
 | |
| 	wait_for_completion(&iface->complete);
 | |
| 	del_timer_sync(&iface->timeout_timer);
 | |
| 	while (i2c_rd32(iface, S6_I2C_TXFLR) > 0)
 | |
| 		schedule();
 | |
| 	while (i2c_rd16(iface, S6_I2C_STATUS) & (1 << S6_I2C_STATUS_ACTIVITY))
 | |
| 		schedule();
 | |
| 
 | |
| 	i2c_wr16(iface, S6_I2C_INTRMASK, 0);
 | |
| 	i2c_wr16(iface, S6_I2C_ENABLE, 0);
 | |
| 	return iface->msgs_done;
 | |
| }
 | |
| 
 | |
| static u32 s6i2c_functionality(struct i2c_adapter *adap)
 | |
| {
 | |
| 	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
 | |
| }
 | |
| 
 | |
| static struct i2c_algorithm s6i2c_algorithm = {
 | |
| 	.master_xfer   = s6i2c_master_xfer,
 | |
| 	.functionality = s6i2c_functionality,
 | |
| };
 | |
| 
 | |
| static u16 __devinit nanoseconds_on_clk(struct s6i2c_if *iface, u32 ns)
 | |
| {
 | |
| 	u32 dividend = ((clk_get_rate(iface->clk) / 1000) * ns) / 1000000;
 | |
| 	if (dividend > 0xffff)
 | |
| 		return 0xffff;
 | |
| 	return dividend;
 | |
| }
 | |
| 
 | |
| static int __devinit s6i2c_probe(struct platform_device *dev)
 | |
| {
 | |
| 	struct s6i2c_if *iface = &s6i2c_if;
 | |
| 	struct i2c_adapter *p_adap;
 | |
| 	const char *clock;
 | |
| 	int bus_num, rc;
 | |
| 	spin_lock_init(&iface->lock);
 | |
| 	init_completion(&iface->complete);
 | |
| 	iface->irq = platform_get_irq(dev, 0);
 | |
| 	if (iface->irq < 0) {
 | |
| 		rc = iface->irq;
 | |
| 		goto err_out;
 | |
| 	}
 | |
| 	iface->res = platform_get_resource(dev, IORESOURCE_MEM, 0);
 | |
| 	if (!iface->res) {
 | |
| 		rc = -ENXIO;
 | |
| 		goto err_out;
 | |
| 	}
 | |
| 	iface->res = request_mem_region(iface->res->start,
 | |
| 					resource_size(iface->res),
 | |
| 					dev->dev.bus_id);
 | |
| 	if (!iface->res) {
 | |
| 		rc = -EBUSY;
 | |
| 		goto err_out;
 | |
| 	}
 | |
| 	iface->reg = ioremap_nocache(iface->res->start,
 | |
| 				     resource_size(iface->res));
 | |
| 	if (!iface->reg) {
 | |
| 		rc = -ENOMEM;
 | |
| 		goto err_reg;
 | |
| 	}
 | |
| 
 | |
| 	clock = 0;
 | |
| 	bus_num = -1;
 | |
| 	if (dev->dev.platform_data) {
 | |
| 		struct s6_i2c_platform_data *pdata = dev->dev.platform_data;
 | |
| 		bus_num = pdata->bus_num;
 | |
| 		clock = pdata->clock;
 | |
| 	}
 | |
| 	iface->clk = clk_get(&dev->dev, clock);
 | |
| 	if (IS_ERR(iface->clk)) {
 | |
| 		rc = PTR_ERR(iface->clk);
 | |
| 		goto err_map;
 | |
| 	}
 | |
| 	rc = clk_enable(iface->clk);
 | |
| 	if (rc < 0)
 | |
| 		goto err_clk_put;
 | |
| 	init_timer(&iface->timeout_timer);
 | |
| 	iface->timeout_timer.function = s6i2c_timeout;
 | |
| 	iface->timeout_timer.data = (unsigned long)iface;
 | |
| 
 | |
| 	p_adap = &iface->adap;
 | |
| 	strlcpy(p_adap->name, dev->name, sizeof(p_adap->name));
 | |
| 	p_adap->algo = &s6i2c_algorithm;
 | |
| 	p_adap->algo_data = iface;
 | |
| 	p_adap->nr = bus_num;
 | |
| 	p_adap->class = 0;
 | |
| 	p_adap->dev.parent = &dev->dev;
 | |
| 	i2c_wr16(iface, S6_I2C_INTRMASK, 0);
 | |
| 	rc = request_irq(iface->irq, s6i2c_interrupt_entry,
 | |
| 			 IRQF_SHARED, dev->name, iface);
 | |
| 	if (rc) {
 | |
| 		dev_err(&p_adap->dev, "s6i2c: can't get IRQ %d\n", iface->irq);
 | |
| 		goto err_clk_dis;
 | |
| 	}
 | |
| 
 | |
| 	i2c_wr16(iface, S6_I2C_ENABLE, 0);
 | |
| 	udelay(1);
 | |
| 	i2c_wr32(iface, S6_I2C_SRESET, 1 << S6_I2C_SRESET_IC_SRST);
 | |
| 	i2c_wr16(iface, S6_I2C_CLRTXABRT, 1);
 | |
| 	i2c_wr16(iface, S6_I2C_CON,
 | |
| 			(1 << S6_I2C_CON_MASTER) |
 | |
| 			(S6_I2C_CON_SPEED_NORMAL << S6_I2C_CON_SPEED) |
 | |
| 			(0 << S6_I2C_CON_10BITSLAVE) |
 | |
| 			(0 << S6_I2C_CON_10BITMASTER) |
 | |
| 			(1 << S6_I2C_CON_RESTARTENA) |
 | |
| 			(1 << S6_I2C_CON_SLAVEDISABLE));
 | |
| 	i2c_wr16(iface, S6_I2C_SSHCNT, nanoseconds_on_clk(iface, 4000));
 | |
| 	i2c_wr16(iface, S6_I2C_SSLCNT, nanoseconds_on_clk(iface, 4700));
 | |
| 	i2c_wr16(iface, S6_I2C_FSHCNT, nanoseconds_on_clk(iface, 600));
 | |
| 	i2c_wr16(iface, S6_I2C_FSLCNT, nanoseconds_on_clk(iface, 1300));
 | |
| 	i2c_wr16(iface, S6_I2C_RXTL, 0);
 | |
| 	i2c_wr16(iface, S6_I2C_TXTL, 0);
 | |
| 
 | |
| 	platform_set_drvdata(dev, iface);
 | |
| 	rc = i2c_add_numbered_adapter(p_adap);
 | |
| 	if (rc)
 | |
| 		goto err_irq_free;
 | |
| 	return 0;
 | |
| 
 | |
| err_irq_free:
 | |
| 	free_irq(iface->irq, iface);
 | |
| err_clk_dis:
 | |
| 	clk_disable(iface->clk);
 | |
| err_clk_put:
 | |
| 	clk_put(iface->clk);
 | |
| err_map:
 | |
| 	iounmap(iface->reg);
 | |
| err_reg:
 | |
| 	release_mem_region(iface->res->start,
 | |
| 			   resource_size(iface->res));
 | |
| err_out:
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| static int __devexit s6i2c_remove(struct platform_device *pdev)
 | |
| {
 | |
| 	struct s6i2c_if *iface = platform_get_drvdata(pdev);
 | |
| 	i2c_wr16(iface, S6_I2C_ENABLE, 0);
 | |
| 	platform_set_drvdata(pdev, NULL);
 | |
| 	i2c_del_adapter(&iface->adap);
 | |
| 	free_irq(iface->irq, iface);
 | |
| 	clk_disable(iface->clk);
 | |
| 	clk_put(iface->clk);
 | |
| 	iounmap(iface->reg);
 | |
| 	release_mem_region(iface->res->start,
 | |
| 			   resource_size(iface->res));
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static struct platform_driver s6i2c_driver = {
 | |
| 	.probe		= s6i2c_probe,
 | |
| 	.remove		= __devexit_p(s6i2c_remove),
 | |
| 	.driver		= {
 | |
| 		.name	= DRV_NAME,
 | |
| 		.owner	= THIS_MODULE,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| static int __init s6i2c_init(void)
 | |
| {
 | |
| 	pr_info("I2C: S6000 I2C driver\n");
 | |
| 	return platform_driver_register(&s6i2c_driver);
 | |
| }
 | |
| 
 | |
| static void __exit s6i2c_exit(void)
 | |
| {
 | |
| 	platform_driver_unregister(&s6i2c_driver);
 | |
| }
 | |
| 
 | |
| MODULE_DESCRIPTION("I2C-Bus adapter routines for S6000 I2C");
 | |
| MODULE_LICENSE("GPL");
 | |
| MODULE_ALIAS("platform:" DRV_NAME);
 | |
| 
 | |
| subsys_initcall(s6i2c_init);
 | |
| module_exit(s6i2c_exit);
 |