This patch removes wrapper functions used to access regmap, and make driver using regmap_*() functions instead. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Mark Brown <broonie@linaro.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
		
			
				
	
	
		
			280 lines
		
	
	
	
		
			7.2 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			280 lines
		
	
	
	
		
			7.2 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
/*
 | 
						|
 * max77693.c - Regulator driver for the Maxim 77693
 | 
						|
 *
 | 
						|
 * Copyright (C) 2013 Samsung Electronics
 | 
						|
 * Jonghwa Lee <jonghwa3.lee@samsung.com>
 | 
						|
 *
 | 
						|
 * This program is free software; you can redistribute it and/or modify
 | 
						|
 * it under the terms of the GNU General Public License as published by
 | 
						|
 * the Free Software Foundation; either version 2 of the License, or
 | 
						|
 * (at your option) any later version.
 | 
						|
 *
 | 
						|
 * This program is distributed in the hope that it will be useful,
 | 
						|
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 | 
						|
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 | 
						|
 * GNU General Public License for more details.
 | 
						|
 *
 | 
						|
 * You should have received a copy of the GNU General Public License
 | 
						|
 * along with this program; if not, write to the Free Software
 | 
						|
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 | 
						|
 *
 | 
						|
 * This driver is based on max77686.c
 | 
						|
 */
 | 
						|
 | 
						|
#include <linux/err.h>
 | 
						|
#include <linux/slab.h>
 | 
						|
#include <linux/platform_device.h>
 | 
						|
#include <linux/module.h>
 | 
						|
#include <linux/export.h>
 | 
						|
#include <linux/regulator/driver.h>
 | 
						|
#include <linux/regulator/machine.h>
 | 
						|
#include <linux/mfd/max77693.h>
 | 
						|
#include <linux/mfd/max77693-private.h>
 | 
						|
#include <linux/regulator/of_regulator.h>
 | 
						|
#include <linux/regmap.h>
 | 
						|
 | 
						|
#define CHGIN_ILIM_STEP_20mA			20000
 | 
						|
 | 
						|
/* CHARGER regulator ops */
 | 
						|
/* CHARGER regulator uses two bits for enabling */
 | 
						|
static int max77693_chg_is_enabled(struct regulator_dev *rdev)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
	unsigned int val;
 | 
						|
 | 
						|
	ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &val);
 | 
						|
	if (ret)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	return (val & rdev->desc->enable_mask) == rdev->desc->enable_mask;
 | 
						|
}
 | 
						|
 | 
						|
/*
 | 
						|
 * CHARGER regulator - Min : 20mA, Max : 2580mA, step : 20mA
 | 
						|
 * 0x00, 0x01, 0x2, 0x03	= 60 mA
 | 
						|
 * 0x04 ~ 0x7E			= (60 + (X - 3) * 20) mA
 | 
						|
 */
 | 
						|
static int max77693_chg_get_current_limit(struct regulator_dev *rdev)
 | 
						|
{
 | 
						|
	unsigned int chg_min_uA = rdev->constraints->min_uA;
 | 
						|
	unsigned int chg_max_uA = rdev->constraints->max_uA;
 | 
						|
	unsigned int reg, sel;
 | 
						|
	unsigned int val;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	ret = regmap_read(rdev->regmap, MAX77693_CHG_REG_CHG_CNFG_09, ®);
 | 
						|
	if (ret < 0)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	sel = reg & CHG_CNFG_09_CHGIN_ILIM_MASK;
 | 
						|
 | 
						|
	/* the first four codes for charger current are all 60mA */
 | 
						|
	if (sel <= 3)
 | 
						|
		sel = 0;
 | 
						|
	else
 | 
						|
		sel -= 3;
 | 
						|
 | 
						|
	val = chg_min_uA + CHGIN_ILIM_STEP_20mA * sel;
 | 
						|
	if (val > chg_max_uA)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	return val;
 | 
						|
}
 | 
						|
 | 
						|
static int max77693_chg_set_current_limit(struct regulator_dev *rdev,
 | 
						|
						int min_uA, int max_uA)
 | 
						|
{
 | 
						|
	unsigned int chg_min_uA = rdev->constraints->min_uA;
 | 
						|
	int sel = 0;
 | 
						|
 | 
						|
	while (chg_min_uA + CHGIN_ILIM_STEP_20mA * sel < min_uA)
 | 
						|
		sel++;
 | 
						|
 | 
						|
	if (chg_min_uA + CHGIN_ILIM_STEP_20mA * sel > max_uA)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	/* the first four codes for charger current are all 60mA */
 | 
						|
	sel += 3;
 | 
						|
 | 
						|
	return regmap_write(rdev->regmap,
 | 
						|
				MAX77693_CHG_REG_CHG_CNFG_09, sel);
 | 
						|
}
 | 
						|
/* end of CHARGER regulator ops */
 | 
						|
 | 
						|
static const unsigned int max77693_safeout_table[] = {
 | 
						|
	4850000,
 | 
						|
	4900000,
 | 
						|
	4950000,
 | 
						|
	3300000,
 | 
						|
};
 | 
						|
 | 
						|
static struct regulator_ops max77693_safeout_ops = {
 | 
						|
	.list_voltage		= regulator_list_voltage_table,
 | 
						|
	.is_enabled		= regulator_is_enabled_regmap,
 | 
						|
	.enable			= regulator_enable_regmap,
 | 
						|
	.disable		= regulator_disable_regmap,
 | 
						|
	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
 | 
						|
	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
 | 
						|
};
 | 
						|
 | 
						|
static struct regulator_ops max77693_charger_ops = {
 | 
						|
	.is_enabled		= max77693_chg_is_enabled,
 | 
						|
	.enable			= regulator_enable_regmap,
 | 
						|
	.disable		= regulator_disable_regmap,
 | 
						|
	.get_current_limit	= max77693_chg_get_current_limit,
 | 
						|
	.set_current_limit	= max77693_chg_set_current_limit,
 | 
						|
};
 | 
						|
 | 
						|
#define regulator_desc_esafeout(_num)	{			\
 | 
						|
	.name		= "ESAFEOUT"#_num,			\
 | 
						|
	.id		= MAX77693_ESAFEOUT##_num,		\
 | 
						|
	.n_voltages	= 4,					\
 | 
						|
	.ops		= &max77693_safeout_ops,		\
 | 
						|
	.type		= REGULATOR_VOLTAGE,			\
 | 
						|
	.owner		= THIS_MODULE,				\
 | 
						|
	.volt_table	= max77693_safeout_table,		\
 | 
						|
	.vsel_reg	= MAX77693_CHG_REG_SAFEOUT_CTRL,	\
 | 
						|
	.vsel_mask	= SAFEOUT_CTRL_SAFEOUT##_num##_MASK,	\
 | 
						|
	.enable_reg	= MAX77693_CHG_REG_SAFEOUT_CTRL,	\
 | 
						|
	.enable_mask	= SAFEOUT_CTRL_ENSAFEOUT##_num##_MASK ,	\
 | 
						|
}
 | 
						|
 | 
						|
static struct regulator_desc regulators[] = {
 | 
						|
	regulator_desc_esafeout(1),
 | 
						|
	regulator_desc_esafeout(2),
 | 
						|
	{
 | 
						|
		.name = "CHARGER",
 | 
						|
		.id = MAX77693_CHARGER,
 | 
						|
		.ops = &max77693_charger_ops,
 | 
						|
		.type = REGULATOR_CURRENT,
 | 
						|
		.owner = THIS_MODULE,
 | 
						|
		.enable_reg = MAX77693_CHG_REG_CHG_CNFG_00,
 | 
						|
		.enable_mask = CHG_CNFG_00_CHG_MASK |
 | 
						|
				CHG_CNFG_00_BUCK_MASK,
 | 
						|
	},
 | 
						|
};
 | 
						|
 | 
						|
#ifdef CONFIG_OF
 | 
						|
static int max77693_pmic_dt_parse_rdata(struct device *dev,
 | 
						|
					struct max77693_regulator_data **rdata)
 | 
						|
{
 | 
						|
	struct device_node *np;
 | 
						|
	struct of_regulator_match *rmatch;
 | 
						|
	struct max77693_regulator_data *tmp;
 | 
						|
	int i, matched = 0;
 | 
						|
 | 
						|
	np = of_get_child_by_name(dev->parent->of_node, "regulators");
 | 
						|
	if (!np)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	rmatch = devm_kzalloc(dev,
 | 
						|
		 sizeof(*rmatch) * ARRAY_SIZE(regulators), GFP_KERNEL);
 | 
						|
	if (!rmatch) {
 | 
						|
		of_node_put(np);
 | 
						|
		return -ENOMEM;
 | 
						|
	}
 | 
						|
 | 
						|
	for (i = 0; i < ARRAY_SIZE(regulators); i++)
 | 
						|
		rmatch[i].name = regulators[i].name;
 | 
						|
 | 
						|
	matched = of_regulator_match(dev, np, rmatch, ARRAY_SIZE(regulators));
 | 
						|
	of_node_put(np);
 | 
						|
	if (matched <= 0)
 | 
						|
		return matched;
 | 
						|
	*rdata = devm_kzalloc(dev, sizeof(**rdata) * matched, GFP_KERNEL);
 | 
						|
	if (!(*rdata))
 | 
						|
		return -ENOMEM;
 | 
						|
 | 
						|
	tmp = *rdata;
 | 
						|
 | 
						|
	for (i = 0; i < matched; i++) {
 | 
						|
		tmp->initdata = rmatch[i].init_data;
 | 
						|
		tmp->of_node = rmatch[i].of_node;
 | 
						|
		tmp->id = regulators[i].id;
 | 
						|
		tmp++;
 | 
						|
	}
 | 
						|
 | 
						|
	return matched;
 | 
						|
}
 | 
						|
#else
 | 
						|
static int max77693_pmic_dt_parse_rdata(struct device *dev,
 | 
						|
					struct max77693_regulator_data **rdata)
 | 
						|
{
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
#endif /* CONFIG_OF */
 | 
						|
 | 
						|
static int max77693_pmic_init_rdata(struct device *dev,
 | 
						|
				    struct max77693_regulator_data **rdata)
 | 
						|
{
 | 
						|
	struct max77693_platform_data *pdata;
 | 
						|
	int num_regulators = 0;
 | 
						|
 | 
						|
	pdata = dev_get_platdata(dev->parent);
 | 
						|
	if (pdata) {
 | 
						|
		*rdata = pdata->regulators;
 | 
						|
		num_regulators = pdata->num_regulators;
 | 
						|
	}
 | 
						|
 | 
						|
	if (!(*rdata) && dev->parent->of_node)
 | 
						|
		num_regulators = max77693_pmic_dt_parse_rdata(dev, rdata);
 | 
						|
 | 
						|
	return num_regulators;
 | 
						|
}
 | 
						|
 | 
						|
static int max77693_pmic_probe(struct platform_device *pdev)
 | 
						|
{
 | 
						|
	struct max77693_dev *iodev = dev_get_drvdata(pdev->dev.parent);
 | 
						|
	struct max77693_regulator_data *rdata = NULL;
 | 
						|
	int num_rdata, i;
 | 
						|
	struct regulator_config config;
 | 
						|
 | 
						|
	num_rdata = max77693_pmic_init_rdata(&pdev->dev, &rdata);
 | 
						|
	if (!rdata || num_rdata <= 0) {
 | 
						|
		dev_err(&pdev->dev, "No init data supplied.\n");
 | 
						|
		return -ENODEV;
 | 
						|
	}
 | 
						|
 | 
						|
	config.dev = &pdev->dev;
 | 
						|
	config.regmap = iodev->regmap;
 | 
						|
 | 
						|
	for (i = 0; i < num_rdata; i++) {
 | 
						|
		int id = rdata[i].id;
 | 
						|
		struct regulator_dev *rdev;
 | 
						|
 | 
						|
		config.init_data = rdata[i].initdata;
 | 
						|
		config.of_node = rdata[i].of_node;
 | 
						|
 | 
						|
		rdev = devm_regulator_register(&pdev->dev,
 | 
						|
						®ulators[id], &config);
 | 
						|
		if (IS_ERR(rdev)) {
 | 
						|
			dev_err(&pdev->dev,
 | 
						|
				"Failed to initialize regulator-%d\n", id);
 | 
						|
			return PTR_ERR(rdev);
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static const struct platform_device_id max77693_pmic_id[] = {
 | 
						|
	{"max77693-pmic", 0},
 | 
						|
	{},
 | 
						|
};
 | 
						|
 | 
						|
MODULE_DEVICE_TABLE(platform, max77693_pmic_id);
 | 
						|
 | 
						|
static struct platform_driver max77693_pmic_driver = {
 | 
						|
	.driver = {
 | 
						|
		   .name = "max77693-pmic",
 | 
						|
		   .owner = THIS_MODULE,
 | 
						|
		   },
 | 
						|
	.probe = max77693_pmic_probe,
 | 
						|
	.id_table = max77693_pmic_id,
 | 
						|
};
 | 
						|
 | 
						|
module_platform_driver(max77693_pmic_driver);
 | 
						|
 | 
						|
MODULE_DESCRIPTION("MAXIM MAX77693 regulator driver");
 | 
						|
MODULE_AUTHOR("Jonghwa Lee <jonghwa3.lee@samsung.com>");
 | 
						|
MODULE_LICENSE("GPL");
 |