The voltage_shift can be calculated from voltage_mask. Let's remove voltage_shift fied from struct ab8500_regulator_info, this change can prevent missing voltage_shift setting issue. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
		
			
				
	
	
		
			3239 lines
		
	
	
	
		
			80 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			3239 lines
		
	
	
	
		
			80 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
/*
 | 
						|
 * Copyright (C) ST-Ericsson SA 2010
 | 
						|
 *
 | 
						|
 * License Terms: GNU General Public License v2
 | 
						|
 *
 | 
						|
 * Authors: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
 | 
						|
 *          Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson
 | 
						|
 *          Daniel Willerud <daniel.willerud@stericsson.com> for ST-Ericsson
 | 
						|
 *
 | 
						|
 * AB8500 peripheral regulators
 | 
						|
 *
 | 
						|
 * AB8500 supports the following regulators:
 | 
						|
 *   VAUX1/2/3, VINTCORE, VTVOUT, VUSB, VAUDIO, VAMIC1/2, VDMIC, VANA
 | 
						|
 *
 | 
						|
 * AB8505 supports the following regulators:
 | 
						|
 *   VAUX1/2/3/4/5/6, VINTCORE, VADC, VUSB, VAUDIO, VAMIC1/2, VDMIC, VANA
 | 
						|
 */
 | 
						|
#include <linux/init.h>
 | 
						|
#include <linux/kernel.h>
 | 
						|
#include <linux/module.h>
 | 
						|
#include <linux/err.h>
 | 
						|
#include <linux/platform_device.h>
 | 
						|
#include <linux/mfd/abx500.h>
 | 
						|
#include <linux/mfd/abx500/ab8500.h>
 | 
						|
#include <linux/of.h>
 | 
						|
#include <linux/regulator/of_regulator.h>
 | 
						|
#include <linux/regulator/driver.h>
 | 
						|
#include <linux/regulator/machine.h>
 | 
						|
#include <linux/regulator/ab8500.h>
 | 
						|
#include <linux/slab.h>
 | 
						|
 | 
						|
/**
 | 
						|
 * struct ab8500_shared_mode - is used when mode is shared between
 | 
						|
 * two regulators.
 | 
						|
 * @shared_regulator: pointer to the other sharing regulator
 | 
						|
 * @lp_mode_req: low power mode requested by this regulator
 | 
						|
 */
 | 
						|
struct ab8500_shared_mode {
 | 
						|
	struct ab8500_regulator_info *shared_regulator;
 | 
						|
	bool lp_mode_req;
 | 
						|
};
 | 
						|
 | 
						|
/**
 | 
						|
 * struct ab8500_regulator_info - ab8500 regulator information
 | 
						|
 * @dev: device pointer
 | 
						|
 * @desc: regulator description
 | 
						|
 * @regulator_dev: regulator device
 | 
						|
 * @shared_mode: used when mode is shared between two regulators
 | 
						|
 * @load_lp_uA: maximum load in idle (low power) mode
 | 
						|
 * @update_bank: bank to control on/off
 | 
						|
 * @update_reg: register to control on/off
 | 
						|
 * @update_mask: mask to enable/disable and set mode of regulator
 | 
						|
 * @update_val: bits holding the regulator current mode
 | 
						|
 * @update_val_idle: bits to enable the regulator in idle (low power) mode
 | 
						|
 * @update_val_normal: bits to enable the regulator in normal (high power) mode
 | 
						|
 * @mode_bank: bank with location of mode register
 | 
						|
 * @mode_reg: mode register
 | 
						|
 * @mode_mask: mask for setting mode
 | 
						|
 * @mode_val_idle: mode setting for low power
 | 
						|
 * @mode_val_normal: mode setting for normal power
 | 
						|
 * @voltage_bank: bank to control regulator voltage
 | 
						|
 * @voltage_reg: register to control regulator voltage
 | 
						|
 * @voltage_mask: mask to control regulator voltage
 | 
						|
 */
 | 
						|
struct ab8500_regulator_info {
 | 
						|
	struct device		*dev;
 | 
						|
	struct regulator_desc	desc;
 | 
						|
	struct regulator_dev	*regulator;
 | 
						|
	struct ab8500_shared_mode *shared_mode;
 | 
						|
	int load_lp_uA;
 | 
						|
	u8 update_bank;
 | 
						|
	u8 update_reg;
 | 
						|
	u8 update_mask;
 | 
						|
	u8 update_val;
 | 
						|
	u8 update_val_idle;
 | 
						|
	u8 update_val_normal;
 | 
						|
	u8 mode_bank;
 | 
						|
	u8 mode_reg;
 | 
						|
	u8 mode_mask;
 | 
						|
	u8 mode_val_idle;
 | 
						|
	u8 mode_val_normal;
 | 
						|
	u8 voltage_bank;
 | 
						|
	u8 voltage_reg;
 | 
						|
	u8 voltage_mask;
 | 
						|
	struct {
 | 
						|
		u8 voltage_limit;
 | 
						|
		u8 voltage_bank;
 | 
						|
		u8 voltage_reg;
 | 
						|
		u8 voltage_mask;
 | 
						|
	} expand_register;
 | 
						|
};
 | 
						|
 | 
						|
/* voltage tables for the vauxn/vintcore supplies */
 | 
						|
static const unsigned int ldo_vauxn_voltages[] = {
 | 
						|
	1100000,
 | 
						|
	1200000,
 | 
						|
	1300000,
 | 
						|
	1400000,
 | 
						|
	1500000,
 | 
						|
	1800000,
 | 
						|
	1850000,
 | 
						|
	1900000,
 | 
						|
	2500000,
 | 
						|
	2650000,
 | 
						|
	2700000,
 | 
						|
	2750000,
 | 
						|
	2800000,
 | 
						|
	2900000,
 | 
						|
	3000000,
 | 
						|
	3300000,
 | 
						|
};
 | 
						|
 | 
						|
static const unsigned int ldo_vaux3_voltages[] = {
 | 
						|
	1200000,
 | 
						|
	1500000,
 | 
						|
	1800000,
 | 
						|
	2100000,
 | 
						|
	2500000,
 | 
						|
	2750000,
 | 
						|
	2790000,
 | 
						|
	2910000,
 | 
						|
};
 | 
						|
 | 
						|
static const unsigned int ldo_vaux56_voltages[] = {
 | 
						|
	1800000,
 | 
						|
	1050000,
 | 
						|
	1100000,
 | 
						|
	1200000,
 | 
						|
	1500000,
 | 
						|
	2200000,
 | 
						|
	2500000,
 | 
						|
	2790000,
 | 
						|
};
 | 
						|
 | 
						|
static const unsigned int ldo_vaux3_ab8540_voltages[] = {
 | 
						|
	1200000,
 | 
						|
	1500000,
 | 
						|
	1800000,
 | 
						|
	2100000,
 | 
						|
	2500000,
 | 
						|
	2750000,
 | 
						|
	2790000,
 | 
						|
	2910000,
 | 
						|
	3050000,
 | 
						|
};
 | 
						|
 | 
						|
static const unsigned int ldo_vaux56_ab8540_voltages[] = {
 | 
						|
	750000, 760000, 770000, 780000, 790000, 800000,
 | 
						|
	810000, 820000, 830000, 840000, 850000, 860000,
 | 
						|
	870000, 880000, 890000, 900000, 910000, 920000,
 | 
						|
	930000, 940000, 950000, 960000, 970000, 980000,
 | 
						|
	990000, 1000000, 1010000, 1020000, 1030000,
 | 
						|
	1040000, 1050000, 1060000, 1070000, 1080000,
 | 
						|
	1090000, 1100000, 1110000, 1120000, 1130000,
 | 
						|
	1140000, 1150000, 1160000, 1170000, 1180000,
 | 
						|
	1190000, 1200000, 1210000, 1220000, 1230000,
 | 
						|
	1240000, 1250000, 1260000, 1270000, 1280000,
 | 
						|
	1290000, 1300000, 1310000, 1320000, 1330000,
 | 
						|
	1340000, 1350000, 1360000, 1800000, 2790000,
 | 
						|
};
 | 
						|
 | 
						|
static const unsigned int ldo_vintcore_voltages[] = {
 | 
						|
	1200000,
 | 
						|
	1225000,
 | 
						|
	1250000,
 | 
						|
	1275000,
 | 
						|
	1300000,
 | 
						|
	1325000,
 | 
						|
	1350000,
 | 
						|
};
 | 
						|
 | 
						|
static const unsigned int ldo_sdio_voltages[] = {
 | 
						|
	1160000,
 | 
						|
	1050000,
 | 
						|
	1100000,
 | 
						|
	1500000,
 | 
						|
	1800000,
 | 
						|
	2200000,
 | 
						|
	2910000,
 | 
						|
	3050000,
 | 
						|
};
 | 
						|
 | 
						|
static const unsigned int fixed_1200000_voltage[] = {
 | 
						|
	1200000,
 | 
						|
};
 | 
						|
 | 
						|
static const unsigned int fixed_1800000_voltage[] = {
 | 
						|
	1800000,
 | 
						|
};
 | 
						|
 | 
						|
static const unsigned int fixed_2000000_voltage[] = {
 | 
						|
	2000000,
 | 
						|
};
 | 
						|
 | 
						|
static const unsigned int fixed_2050000_voltage[] = {
 | 
						|
	2050000,
 | 
						|
};
 | 
						|
 | 
						|
static const unsigned int fixed_3300000_voltage[] = {
 | 
						|
	3300000,
 | 
						|
};
 | 
						|
 | 
						|
static const unsigned int ldo_vana_voltages[] = {
 | 
						|
	1050000,
 | 
						|
	1075000,
 | 
						|
	1100000,
 | 
						|
	1125000,
 | 
						|
	1150000,
 | 
						|
	1175000,
 | 
						|
	1200000,
 | 
						|
	1225000,
 | 
						|
};
 | 
						|
 | 
						|
static const unsigned int ldo_vaudio_voltages[] = {
 | 
						|
	2000000,
 | 
						|
	2100000,
 | 
						|
	2200000,
 | 
						|
	2300000,
 | 
						|
	2400000,
 | 
						|
	2500000,
 | 
						|
	2600000,
 | 
						|
	2600000,	/* Duplicated in Vaudio and IsoUicc Control register. */
 | 
						|
};
 | 
						|
 | 
						|
static const unsigned int ldo_vdmic_voltages[] = {
 | 
						|
	1800000,
 | 
						|
	1900000,
 | 
						|
	2000000,
 | 
						|
	2850000,
 | 
						|
};
 | 
						|
 | 
						|
static DEFINE_MUTEX(shared_mode_mutex);
 | 
						|
static struct ab8500_shared_mode ldo_anamic1_shared;
 | 
						|
static struct ab8500_shared_mode ldo_anamic2_shared;
 | 
						|
static struct ab8500_shared_mode ab8540_ldo_anamic1_shared;
 | 
						|
static struct ab8500_shared_mode ab8540_ldo_anamic2_shared;
 | 
						|
 | 
						|
static int ab8500_regulator_enable(struct regulator_dev *rdev)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
 | 
						|
 | 
						|
	if (info == NULL) {
 | 
						|
		dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	ret = abx500_mask_and_set_register_interruptible(info->dev,
 | 
						|
		info->update_bank, info->update_reg,
 | 
						|
		info->update_mask, info->update_val);
 | 
						|
	if (ret < 0) {
 | 
						|
		dev_err(rdev_get_dev(rdev),
 | 
						|
			"couldn't set enable bits for regulator\n");
 | 
						|
		return ret;
 | 
						|
	}
 | 
						|
 | 
						|
	dev_vdbg(rdev_get_dev(rdev),
 | 
						|
		"%s-enable (bank, reg, mask, value): 0x%x, 0x%x, 0x%x, 0x%x\n",
 | 
						|
		info->desc.name, info->update_bank, info->update_reg,
 | 
						|
		info->update_mask, info->update_val);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int ab8500_regulator_disable(struct regulator_dev *rdev)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
 | 
						|
 | 
						|
	if (info == NULL) {
 | 
						|
		dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	ret = abx500_mask_and_set_register_interruptible(info->dev,
 | 
						|
		info->update_bank, info->update_reg,
 | 
						|
		info->update_mask, 0x0);
 | 
						|
	if (ret < 0) {
 | 
						|
		dev_err(rdev_get_dev(rdev),
 | 
						|
			"couldn't set disable bits for regulator\n");
 | 
						|
		return ret;
 | 
						|
	}
 | 
						|
 | 
						|
	dev_vdbg(rdev_get_dev(rdev),
 | 
						|
		"%s-disable (bank, reg, mask, value): 0x%x, 0x%x, 0x%x, 0x%x\n",
 | 
						|
		info->desc.name, info->update_bank, info->update_reg,
 | 
						|
		info->update_mask, 0x0);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int ab8500_regulator_is_enabled(struct regulator_dev *rdev)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
 | 
						|
	u8 regval;
 | 
						|
 | 
						|
	if (info == NULL) {
 | 
						|
		dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	ret = abx500_get_register_interruptible(info->dev,
 | 
						|
		info->update_bank, info->update_reg, ®val);
 | 
						|
	if (ret < 0) {
 | 
						|
		dev_err(rdev_get_dev(rdev),
 | 
						|
			"couldn't read 0x%x register\n", info->update_reg);
 | 
						|
		return ret;
 | 
						|
	}
 | 
						|
 | 
						|
	dev_vdbg(rdev_get_dev(rdev),
 | 
						|
		"%s-is_enabled (bank, reg, mask, value): 0x%x, 0x%x, 0x%x,"
 | 
						|
		" 0x%x\n",
 | 
						|
		info->desc.name, info->update_bank, info->update_reg,
 | 
						|
		info->update_mask, regval);
 | 
						|
 | 
						|
	if (regval & info->update_mask)
 | 
						|
		return 1;
 | 
						|
	else
 | 
						|
		return 0;
 | 
						|
}
 | 
						|
 | 
						|
static unsigned int ab8500_regulator_get_optimum_mode(
 | 
						|
		struct regulator_dev *rdev, int input_uV,
 | 
						|
		int output_uV, int load_uA)
 | 
						|
{
 | 
						|
	unsigned int mode;
 | 
						|
 | 
						|
	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
 | 
						|
 | 
						|
	if (info == NULL) {
 | 
						|
		dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	if (load_uA <= info->load_lp_uA)
 | 
						|
		mode = REGULATOR_MODE_IDLE;
 | 
						|
	else
 | 
						|
		mode = REGULATOR_MODE_NORMAL;
 | 
						|
 | 
						|
	return mode;
 | 
						|
}
 | 
						|
 | 
						|
static int ab8500_regulator_set_mode(struct regulator_dev *rdev,
 | 
						|
				     unsigned int mode)
 | 
						|
{
 | 
						|
	int ret = 0;
 | 
						|
	u8 bank, reg, mask, val;
 | 
						|
	bool lp_mode_req = false;
 | 
						|
	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
 | 
						|
 | 
						|
	if (info == NULL) {
 | 
						|
		dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	if (info->mode_mask) {
 | 
						|
		bank = info->mode_bank;
 | 
						|
		reg = info->mode_reg;
 | 
						|
		mask = info->mode_mask;
 | 
						|
	} else {
 | 
						|
		bank = info->update_bank;
 | 
						|
		reg = info->update_reg;
 | 
						|
		mask = info->update_mask;
 | 
						|
	}
 | 
						|
 | 
						|
	if (info->shared_mode)
 | 
						|
		mutex_lock(&shared_mode_mutex);
 | 
						|
 | 
						|
	switch (mode) {
 | 
						|
	case REGULATOR_MODE_NORMAL:
 | 
						|
		if (info->shared_mode)
 | 
						|
			lp_mode_req = false;
 | 
						|
 | 
						|
		if (info->mode_mask)
 | 
						|
			val = info->mode_val_normal;
 | 
						|
		else
 | 
						|
			val = info->update_val_normal;
 | 
						|
		break;
 | 
						|
	case REGULATOR_MODE_IDLE:
 | 
						|
		if (info->shared_mode) {
 | 
						|
			struct ab8500_regulator_info *shared_regulator;
 | 
						|
 | 
						|
			shared_regulator = info->shared_mode->shared_regulator;
 | 
						|
			if (!shared_regulator->shared_mode->lp_mode_req) {
 | 
						|
				/* Other regulator prevent LP mode */
 | 
						|
				info->shared_mode->lp_mode_req = true;
 | 
						|
				goto out_unlock;
 | 
						|
			}
 | 
						|
 | 
						|
			lp_mode_req = true;
 | 
						|
		}
 | 
						|
 | 
						|
		if (info->mode_mask)
 | 
						|
			val = info->mode_val_idle;
 | 
						|
		else
 | 
						|
			val = info->update_val_idle;
 | 
						|
		break;
 | 
						|
	default:
 | 
						|
		ret = -EINVAL;
 | 
						|
		goto out_unlock;
 | 
						|
	}
 | 
						|
 | 
						|
	if (info->mode_mask || ab8500_regulator_is_enabled(rdev)) {
 | 
						|
		ret = abx500_mask_and_set_register_interruptible(info->dev,
 | 
						|
			bank, reg, mask, val);
 | 
						|
		if (ret < 0) {
 | 
						|
			dev_err(rdev_get_dev(rdev),
 | 
						|
				"couldn't set regulator mode\n");
 | 
						|
			goto out_unlock;
 | 
						|
		}
 | 
						|
 | 
						|
		dev_vdbg(rdev_get_dev(rdev),
 | 
						|
			"%s-set_mode (bank, reg, mask, value): "
 | 
						|
			"0x%x, 0x%x, 0x%x, 0x%x\n",
 | 
						|
			info->desc.name, bank, reg,
 | 
						|
			mask, val);
 | 
						|
	}
 | 
						|
 | 
						|
	if (!info->mode_mask)
 | 
						|
		info->update_val = val;
 | 
						|
 | 
						|
	if (info->shared_mode)
 | 
						|
		info->shared_mode->lp_mode_req = lp_mode_req;
 | 
						|
 | 
						|
out_unlock:
 | 
						|
	if (info->shared_mode)
 | 
						|
		mutex_unlock(&shared_mode_mutex);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static unsigned int ab8500_regulator_get_mode(struct regulator_dev *rdev)
 | 
						|
{
 | 
						|
	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
 | 
						|
	int ret;
 | 
						|
	u8 val;
 | 
						|
	u8 val_normal;
 | 
						|
	u8 val_idle;
 | 
						|
 | 
						|
	if (info == NULL) {
 | 
						|
		dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	/* Need special handling for shared mode */
 | 
						|
	if (info->shared_mode) {
 | 
						|
		if (info->shared_mode->lp_mode_req)
 | 
						|
			return REGULATOR_MODE_IDLE;
 | 
						|
		else
 | 
						|
			return REGULATOR_MODE_NORMAL;
 | 
						|
	}
 | 
						|
 | 
						|
	if (info->mode_mask) {
 | 
						|
		/* Dedicated register for handling mode */
 | 
						|
		ret = abx500_get_register_interruptible(info->dev,
 | 
						|
		info->mode_bank, info->mode_reg, &val);
 | 
						|
		val = val & info->mode_mask;
 | 
						|
 | 
						|
		val_normal = info->mode_val_normal;
 | 
						|
		val_idle = info->mode_val_idle;
 | 
						|
	} else {
 | 
						|
		/* Mode register same as enable register */
 | 
						|
		val = info->update_val;
 | 
						|
		val_normal = info->update_val_normal;
 | 
						|
		val_idle = info->update_val_idle;
 | 
						|
	}
 | 
						|
 | 
						|
	if (val == val_normal)
 | 
						|
		ret = REGULATOR_MODE_NORMAL;
 | 
						|
	else if (val == val_idle)
 | 
						|
		ret = REGULATOR_MODE_IDLE;
 | 
						|
	else
 | 
						|
		ret = -EINVAL;
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int ab8500_regulator_get_voltage_sel(struct regulator_dev *rdev)
 | 
						|
{
 | 
						|
	int ret, voltage_shift;
 | 
						|
	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
 | 
						|
	u8 regval;
 | 
						|
 | 
						|
	if (info == NULL) {
 | 
						|
		dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	voltage_shift = ffs(info->voltage_mask) - 1;
 | 
						|
 | 
						|
	ret = abx500_get_register_interruptible(info->dev,
 | 
						|
			info->voltage_bank, info->voltage_reg, ®val);
 | 
						|
	if (ret < 0) {
 | 
						|
		dev_err(rdev_get_dev(rdev),
 | 
						|
			"couldn't read voltage reg for regulator\n");
 | 
						|
		return ret;
 | 
						|
	}
 | 
						|
 | 
						|
	dev_vdbg(rdev_get_dev(rdev),
 | 
						|
		"%s-get_voltage (bank, reg, mask, shift, value): "
 | 
						|
		"0x%x, 0x%x, 0x%x, 0x%x, 0x%x\n",
 | 
						|
		info->desc.name, info->voltage_bank,
 | 
						|
		info->voltage_reg, info->voltage_mask,
 | 
						|
		voltage_shift, regval);
 | 
						|
 | 
						|
	return (regval & info->voltage_mask) >> voltage_shift;
 | 
						|
}
 | 
						|
 | 
						|
static int ab8540_aux3_regulator_get_voltage_sel(struct regulator_dev *rdev)
 | 
						|
{
 | 
						|
	int ret, voltage_shift;
 | 
						|
	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
 | 
						|
	u8 regval, regval_expand;
 | 
						|
 | 
						|
	if (info == NULL) {
 | 
						|
		dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	ret = abx500_get_register_interruptible(info->dev,
 | 
						|
			info->expand_register.voltage_bank,
 | 
						|
			info->expand_register.voltage_reg, ®val_expand);
 | 
						|
	if (ret < 0) {
 | 
						|
		dev_err(rdev_get_dev(rdev),
 | 
						|
			"couldn't read voltage expand reg for regulator\n");
 | 
						|
		return ret;
 | 
						|
	}
 | 
						|
 | 
						|
	dev_vdbg(rdev_get_dev(rdev),
 | 
						|
		 "%s-get_voltage expand (bank, reg, mask, value): 0x%x, 0x%x, 0x%x, 0x%x\n",
 | 
						|
		 info->desc.name, info->expand_register.voltage_bank,
 | 
						|
		 info->expand_register.voltage_reg,
 | 
						|
		 info->expand_register.voltage_mask, regval_expand);
 | 
						|
 | 
						|
	if (regval_expand & info->expand_register.voltage_mask)
 | 
						|
		return info->expand_register.voltage_limit;
 | 
						|
 | 
						|
	ret = abx500_get_register_interruptible(info->dev,
 | 
						|
			info->voltage_bank, info->voltage_reg, ®val);
 | 
						|
	if (ret < 0) {
 | 
						|
		dev_err(rdev_get_dev(rdev),
 | 
						|
			"couldn't read voltage reg for regulator\n");
 | 
						|
		return ret;
 | 
						|
	}
 | 
						|
 | 
						|
	dev_vdbg(rdev_get_dev(rdev),
 | 
						|
		 "%s-get_voltage (bank, reg, mask, value): 0x%x, 0x%x, 0x%x, 0x%x\n",
 | 
						|
		 info->desc.name, info->voltage_bank, info->voltage_reg,
 | 
						|
		 info->voltage_mask, regval);
 | 
						|
 | 
						|
	voltage_shift = ffs(info->voltage_mask) - 1;
 | 
						|
 | 
						|
	return (regval & info->voltage_mask) >> voltage_shift;
 | 
						|
}
 | 
						|
 | 
						|
static int ab8500_regulator_set_voltage_sel(struct regulator_dev *rdev,
 | 
						|
					    unsigned selector)
 | 
						|
{
 | 
						|
	int ret, voltage_shift;
 | 
						|
	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
 | 
						|
	u8 regval;
 | 
						|
 | 
						|
	if (info == NULL) {
 | 
						|
		dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	voltage_shift = ffs(info->voltage_mask) - 1;
 | 
						|
 | 
						|
	/* set the registers for the request */
 | 
						|
	regval = (u8)selector << voltage_shift;
 | 
						|
	ret = abx500_mask_and_set_register_interruptible(info->dev,
 | 
						|
			info->voltage_bank, info->voltage_reg,
 | 
						|
			info->voltage_mask, regval);
 | 
						|
	if (ret < 0)
 | 
						|
		dev_err(rdev_get_dev(rdev),
 | 
						|
		"couldn't set voltage reg for regulator\n");
 | 
						|
 | 
						|
	dev_vdbg(rdev_get_dev(rdev),
 | 
						|
		"%s-set_voltage (bank, reg, mask, value): 0x%x, 0x%x, 0x%x,"
 | 
						|
		" 0x%x\n",
 | 
						|
		info->desc.name, info->voltage_bank, info->voltage_reg,
 | 
						|
		info->voltage_mask, regval);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int ab8540_aux3_regulator_set_voltage_sel(struct regulator_dev *rdev,
 | 
						|
						unsigned selector)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
 | 
						|
	u8 regval, regval_expand;
 | 
						|
 | 
						|
	if (info == NULL) {
 | 
						|
		dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	if (selector < info->expand_register.voltage_limit) {
 | 
						|
		int voltage_shift = ffs(info->voltage_mask) - 1;
 | 
						|
 | 
						|
		regval = (u8)selector << voltage_shift;
 | 
						|
		ret = abx500_mask_and_set_register_interruptible(info->dev,
 | 
						|
					info->voltage_bank, info->voltage_reg,
 | 
						|
					info->voltage_mask, regval);
 | 
						|
		if (ret < 0) {
 | 
						|
			dev_err(rdev_get_dev(rdev),
 | 
						|
				"couldn't set voltage reg for regulator\n");
 | 
						|
			return ret;
 | 
						|
		}
 | 
						|
 | 
						|
		dev_vdbg(rdev_get_dev(rdev),
 | 
						|
			 "%s-set_voltage (bank, reg, mask, value): 0x%x, 0x%x, 0x%x, 0x%x\n",
 | 
						|
			 info->desc.name, info->voltage_bank, info->voltage_reg,
 | 
						|
			 info->voltage_mask, regval);
 | 
						|
 | 
						|
		regval_expand = 0;
 | 
						|
	} else {
 | 
						|
		regval_expand = info->expand_register.voltage_mask;
 | 
						|
	}
 | 
						|
 | 
						|
	ret = abx500_mask_and_set_register_interruptible(info->dev,
 | 
						|
				info->expand_register.voltage_bank,
 | 
						|
				info->expand_register.voltage_reg,
 | 
						|
				info->expand_register.voltage_mask,
 | 
						|
				regval_expand);
 | 
						|
	if (ret < 0) {
 | 
						|
		dev_err(rdev_get_dev(rdev),
 | 
						|
			"couldn't set expand voltage reg for regulator\n");
 | 
						|
		return ret;
 | 
						|
	}
 | 
						|
 | 
						|
	dev_vdbg(rdev_get_dev(rdev),
 | 
						|
		 "%s-set_voltage expand (bank, reg, mask, value): 0x%x, 0x%x, 0x%x, 0x%x\n",
 | 
						|
		 info->desc.name, info->expand_register.voltage_bank,
 | 
						|
		 info->expand_register.voltage_reg,
 | 
						|
		 info->expand_register.voltage_mask, regval_expand);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static struct regulator_ops ab8500_regulator_volt_mode_ops = {
 | 
						|
	.enable			= ab8500_regulator_enable,
 | 
						|
	.disable		= ab8500_regulator_disable,
 | 
						|
	.is_enabled		= ab8500_regulator_is_enabled,
 | 
						|
	.get_optimum_mode	= ab8500_regulator_get_optimum_mode,
 | 
						|
	.set_mode		= ab8500_regulator_set_mode,
 | 
						|
	.get_mode		= ab8500_regulator_get_mode,
 | 
						|
	.get_voltage_sel 	= ab8500_regulator_get_voltage_sel,
 | 
						|
	.set_voltage_sel	= ab8500_regulator_set_voltage_sel,
 | 
						|
	.list_voltage		= regulator_list_voltage_table,
 | 
						|
};
 | 
						|
 | 
						|
static struct regulator_ops ab8540_aux3_regulator_volt_mode_ops = {
 | 
						|
	.enable		= ab8500_regulator_enable,
 | 
						|
	.disable	= ab8500_regulator_disable,
 | 
						|
	.get_optimum_mode	= ab8500_regulator_get_optimum_mode,
 | 
						|
	.set_mode	= ab8500_regulator_set_mode,
 | 
						|
	.get_mode	= ab8500_regulator_get_mode,
 | 
						|
	.is_enabled	= ab8500_regulator_is_enabled,
 | 
						|
	.get_voltage_sel = ab8540_aux3_regulator_get_voltage_sel,
 | 
						|
	.set_voltage_sel = ab8540_aux3_regulator_set_voltage_sel,
 | 
						|
	.list_voltage	= regulator_list_voltage_table,
 | 
						|
};
 | 
						|
 | 
						|
static struct regulator_ops ab8500_regulator_volt_ops = {
 | 
						|
	.enable		= ab8500_regulator_enable,
 | 
						|
	.disable	= ab8500_regulator_disable,
 | 
						|
	.is_enabled	= ab8500_regulator_is_enabled,
 | 
						|
	.get_voltage_sel = ab8500_regulator_get_voltage_sel,
 | 
						|
	.set_voltage_sel = ab8500_regulator_set_voltage_sel,
 | 
						|
	.list_voltage	= regulator_list_voltage_table,
 | 
						|
};
 | 
						|
 | 
						|
static struct regulator_ops ab8500_regulator_mode_ops = {
 | 
						|
	.enable			= ab8500_regulator_enable,
 | 
						|
	.disable		= ab8500_regulator_disable,
 | 
						|
	.is_enabled		= ab8500_regulator_is_enabled,
 | 
						|
	.get_optimum_mode	= ab8500_regulator_get_optimum_mode,
 | 
						|
	.set_mode		= ab8500_regulator_set_mode,
 | 
						|
	.get_mode		= ab8500_regulator_get_mode,
 | 
						|
	.list_voltage		= regulator_list_voltage_table,
 | 
						|
};
 | 
						|
 | 
						|
static struct regulator_ops ab8500_regulator_ops = {
 | 
						|
	.enable			= ab8500_regulator_enable,
 | 
						|
	.disable		= ab8500_regulator_disable,
 | 
						|
	.is_enabled		= ab8500_regulator_is_enabled,
 | 
						|
	.list_voltage		= regulator_list_voltage_table,
 | 
						|
};
 | 
						|
 | 
						|
static struct regulator_ops ab8500_regulator_anamic_mode_ops = {
 | 
						|
	.enable		= ab8500_regulator_enable,
 | 
						|
	.disable	= ab8500_regulator_disable,
 | 
						|
	.is_enabled	= ab8500_regulator_is_enabled,
 | 
						|
	.set_mode	= ab8500_regulator_set_mode,
 | 
						|
	.get_mode	= ab8500_regulator_get_mode,
 | 
						|
	.list_voltage	= regulator_list_voltage_table,
 | 
						|
};
 | 
						|
 | 
						|
/* AB8500 regulator information */
 | 
						|
static struct ab8500_regulator_info
 | 
						|
		ab8500_regulator_info[AB8500_NUM_REGULATORS] = {
 | 
						|
	/*
 | 
						|
	 * Variable Voltage Regulators
 | 
						|
	 *   name, min mV, max mV,
 | 
						|
	 *   update bank, reg, mask, enable val
 | 
						|
	 *   volt bank, reg, mask
 | 
						|
	 */
 | 
						|
	[AB8500_LDO_AUX1] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-AUX1",
 | 
						|
			.ops		= &ab8500_regulator_volt_mode_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB8500_LDO_AUX1,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= ARRAY_SIZE(ldo_vauxn_voltages),
 | 
						|
			.volt_table	= ldo_vauxn_voltages,
 | 
						|
			.enable_time	= 200,
 | 
						|
		},
 | 
						|
		.load_lp_uA		= 5000,
 | 
						|
		.update_bank		= 0x04,
 | 
						|
		.update_reg		= 0x09,
 | 
						|
		.update_mask		= 0x03,
 | 
						|
		.update_val		= 0x01,
 | 
						|
		.update_val_idle	= 0x03,
 | 
						|
		.update_val_normal	= 0x01,
 | 
						|
		.voltage_bank		= 0x04,
 | 
						|
		.voltage_reg		= 0x1f,
 | 
						|
		.voltage_mask		= 0x0f,
 | 
						|
	},
 | 
						|
	[AB8500_LDO_AUX2] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-AUX2",
 | 
						|
			.ops		= &ab8500_regulator_volt_mode_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB8500_LDO_AUX2,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= ARRAY_SIZE(ldo_vauxn_voltages),
 | 
						|
			.volt_table	= ldo_vauxn_voltages,
 | 
						|
			.enable_time	= 200,
 | 
						|
		},
 | 
						|
		.load_lp_uA		= 5000,
 | 
						|
		.update_bank		= 0x04,
 | 
						|
		.update_reg		= 0x09,
 | 
						|
		.update_mask		= 0x0c,
 | 
						|
		.update_val		= 0x04,
 | 
						|
		.update_val_idle	= 0x0c,
 | 
						|
		.update_val_normal	= 0x04,
 | 
						|
		.voltage_bank		= 0x04,
 | 
						|
		.voltage_reg		= 0x20,
 | 
						|
		.voltage_mask		= 0x0f,
 | 
						|
	},
 | 
						|
	[AB8500_LDO_AUX3] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-AUX3",
 | 
						|
			.ops		= &ab8500_regulator_volt_mode_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB8500_LDO_AUX3,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= ARRAY_SIZE(ldo_vaux3_voltages),
 | 
						|
			.volt_table	= ldo_vaux3_voltages,
 | 
						|
			.enable_time	= 450,
 | 
						|
		},
 | 
						|
		.load_lp_uA		= 5000,
 | 
						|
		.update_bank		= 0x04,
 | 
						|
		.update_reg		= 0x0a,
 | 
						|
		.update_mask		= 0x03,
 | 
						|
		.update_val		= 0x01,
 | 
						|
		.update_val_idle	= 0x03,
 | 
						|
		.update_val_normal	= 0x01,
 | 
						|
		.voltage_bank		= 0x04,
 | 
						|
		.voltage_reg		= 0x21,
 | 
						|
		.voltage_mask		= 0x07,
 | 
						|
	},
 | 
						|
	[AB8500_LDO_INTCORE] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-INTCORE",
 | 
						|
			.ops		= &ab8500_regulator_volt_mode_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB8500_LDO_INTCORE,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= ARRAY_SIZE(ldo_vintcore_voltages),
 | 
						|
			.volt_table	= ldo_vintcore_voltages,
 | 
						|
			.enable_time	= 750,
 | 
						|
		},
 | 
						|
		.load_lp_uA		= 5000,
 | 
						|
		.update_bank		= 0x03,
 | 
						|
		.update_reg		= 0x80,
 | 
						|
		.update_mask		= 0x44,
 | 
						|
		.update_val		= 0x44,
 | 
						|
		.update_val_idle	= 0x44,
 | 
						|
		.update_val_normal	= 0x04,
 | 
						|
		.voltage_bank		= 0x03,
 | 
						|
		.voltage_reg		= 0x80,
 | 
						|
		.voltage_mask		= 0x38,
 | 
						|
	},
 | 
						|
 | 
						|
	/*
 | 
						|
	 * Fixed Voltage Regulators
 | 
						|
	 *   name, fixed mV,
 | 
						|
	 *   update bank, reg, mask, enable val
 | 
						|
	 */
 | 
						|
	[AB8500_LDO_TVOUT] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-TVOUT",
 | 
						|
			.ops		= &ab8500_regulator_mode_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB8500_LDO_TVOUT,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= 1,
 | 
						|
			.volt_table	= fixed_2000000_voltage,
 | 
						|
			.enable_time	= 500,
 | 
						|
		},
 | 
						|
		.load_lp_uA		= 1000,
 | 
						|
		.update_bank		= 0x03,
 | 
						|
		.update_reg		= 0x80,
 | 
						|
		.update_mask		= 0x82,
 | 
						|
		.update_val		= 0x02,
 | 
						|
		.update_val_idle	= 0x82,
 | 
						|
		.update_val_normal	= 0x02,
 | 
						|
	},
 | 
						|
	[AB8500_LDO_AUDIO] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-AUDIO",
 | 
						|
			.ops		= &ab8500_regulator_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB8500_LDO_AUDIO,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= 1,
 | 
						|
			.enable_time	= 140,
 | 
						|
			.volt_table	= fixed_2000000_voltage,
 | 
						|
		},
 | 
						|
		.update_bank		= 0x03,
 | 
						|
		.update_reg		= 0x83,
 | 
						|
		.update_mask		= 0x02,
 | 
						|
		.update_val		= 0x02,
 | 
						|
	},
 | 
						|
	[AB8500_LDO_ANAMIC1] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-ANAMIC1",
 | 
						|
			.ops		= &ab8500_regulator_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB8500_LDO_ANAMIC1,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= 1,
 | 
						|
			.enable_time	= 500,
 | 
						|
			.volt_table	= fixed_2050000_voltage,
 | 
						|
		},
 | 
						|
		.update_bank		= 0x03,
 | 
						|
		.update_reg		= 0x83,
 | 
						|
		.update_mask		= 0x08,
 | 
						|
		.update_val		= 0x08,
 | 
						|
	},
 | 
						|
	[AB8500_LDO_ANAMIC2] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-ANAMIC2",
 | 
						|
			.ops		= &ab8500_regulator_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB8500_LDO_ANAMIC2,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= 1,
 | 
						|
			.enable_time	= 500,
 | 
						|
			.volt_table	= fixed_2050000_voltage,
 | 
						|
		},
 | 
						|
		.update_bank		= 0x03,
 | 
						|
		.update_reg		= 0x83,
 | 
						|
		.update_mask		= 0x10,
 | 
						|
		.update_val		= 0x10,
 | 
						|
	},
 | 
						|
	[AB8500_LDO_DMIC] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-DMIC",
 | 
						|
			.ops		= &ab8500_regulator_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB8500_LDO_DMIC,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= 1,
 | 
						|
			.enable_time	= 420,
 | 
						|
			.volt_table	= fixed_1800000_voltage,
 | 
						|
		},
 | 
						|
		.update_bank		= 0x03,
 | 
						|
		.update_reg		= 0x83,
 | 
						|
		.update_mask		= 0x04,
 | 
						|
		.update_val		= 0x04,
 | 
						|
	},
 | 
						|
 | 
						|
	/*
 | 
						|
	 * Regulators with fixed voltage and normal/idle modes
 | 
						|
	 */
 | 
						|
	[AB8500_LDO_ANA] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-ANA",
 | 
						|
			.ops		= &ab8500_regulator_mode_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB8500_LDO_ANA,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= 1,
 | 
						|
			.enable_time	= 140,
 | 
						|
			.volt_table	= fixed_1200000_voltage,
 | 
						|
		},
 | 
						|
		.load_lp_uA		= 1000,
 | 
						|
		.update_bank		= 0x04,
 | 
						|
		.update_reg		= 0x06,
 | 
						|
		.update_mask		= 0x0c,
 | 
						|
		.update_val		= 0x04,
 | 
						|
		.update_val_idle	= 0x0c,
 | 
						|
		.update_val_normal	= 0x04,
 | 
						|
	},
 | 
						|
};
 | 
						|
 | 
						|
/* AB8505 regulator information */
 | 
						|
static struct ab8500_regulator_info
 | 
						|
		ab8505_regulator_info[AB8505_NUM_REGULATORS] = {
 | 
						|
	/*
 | 
						|
	 * Variable Voltage Regulators
 | 
						|
	 *   name, min mV, max mV,
 | 
						|
	 *   update bank, reg, mask, enable val
 | 
						|
	 *   volt bank, reg, mask
 | 
						|
	 */
 | 
						|
	[AB8505_LDO_AUX1] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-AUX1",
 | 
						|
			.ops		= &ab8500_regulator_volt_mode_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB8505_LDO_AUX1,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= ARRAY_SIZE(ldo_vauxn_voltages),
 | 
						|
			.volt_table	= ldo_vauxn_voltages,
 | 
						|
		},
 | 
						|
		.load_lp_uA		= 5000,
 | 
						|
		.update_bank		= 0x04,
 | 
						|
		.update_reg		= 0x09,
 | 
						|
		.update_mask		= 0x03,
 | 
						|
		.update_val		= 0x01,
 | 
						|
		.update_val_idle	= 0x03,
 | 
						|
		.update_val_normal	= 0x01,
 | 
						|
		.voltage_bank		= 0x04,
 | 
						|
		.voltage_reg		= 0x1f,
 | 
						|
		.voltage_mask		= 0x0f,
 | 
						|
	},
 | 
						|
	[AB8505_LDO_AUX2] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-AUX2",
 | 
						|
			.ops		= &ab8500_regulator_volt_mode_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB8505_LDO_AUX2,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= ARRAY_SIZE(ldo_vauxn_voltages),
 | 
						|
			.volt_table	= ldo_vauxn_voltages,
 | 
						|
		},
 | 
						|
		.load_lp_uA		= 5000,
 | 
						|
		.update_bank		= 0x04,
 | 
						|
		.update_reg		= 0x09,
 | 
						|
		.update_mask		= 0x0c,
 | 
						|
		.update_val		= 0x04,
 | 
						|
		.update_val_idle	= 0x0c,
 | 
						|
		.update_val_normal	= 0x04,
 | 
						|
		.voltage_bank		= 0x04,
 | 
						|
		.voltage_reg		= 0x20,
 | 
						|
		.voltage_mask		= 0x0f,
 | 
						|
	},
 | 
						|
	[AB8505_LDO_AUX3] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-AUX3",
 | 
						|
			.ops		= &ab8500_regulator_volt_mode_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB8505_LDO_AUX3,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= ARRAY_SIZE(ldo_vaux3_voltages),
 | 
						|
			.volt_table	= ldo_vaux3_voltages,
 | 
						|
		},
 | 
						|
		.load_lp_uA		= 5000,
 | 
						|
		.update_bank		= 0x04,
 | 
						|
		.update_reg		= 0x0a,
 | 
						|
		.update_mask		= 0x03,
 | 
						|
		.update_val		= 0x01,
 | 
						|
		.update_val_idle	= 0x03,
 | 
						|
		.update_val_normal	= 0x01,
 | 
						|
		.voltage_bank		= 0x04,
 | 
						|
		.voltage_reg		= 0x21,
 | 
						|
		.voltage_mask		= 0x07,
 | 
						|
	},
 | 
						|
	[AB8505_LDO_AUX4] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-AUX4",
 | 
						|
			.ops		= &ab8500_regulator_volt_mode_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB8505_LDO_AUX4,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= ARRAY_SIZE(ldo_vauxn_voltages),
 | 
						|
			.volt_table	= ldo_vauxn_voltages,
 | 
						|
		},
 | 
						|
		.load_lp_uA		= 5000,
 | 
						|
		/* values for Vaux4Regu register */
 | 
						|
		.update_bank		= 0x04,
 | 
						|
		.update_reg		= 0x2e,
 | 
						|
		.update_mask		= 0x03,
 | 
						|
		.update_val		= 0x01,
 | 
						|
		.update_val_idle	= 0x03,
 | 
						|
		.update_val_normal	= 0x01,
 | 
						|
		/* values for Vaux4SEL register */
 | 
						|
		.voltage_bank		= 0x04,
 | 
						|
		.voltage_reg		= 0x2f,
 | 
						|
		.voltage_mask		= 0x0f,
 | 
						|
	},
 | 
						|
	[AB8505_LDO_AUX5] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-AUX5",
 | 
						|
			.ops		= &ab8500_regulator_volt_mode_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB8505_LDO_AUX5,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= ARRAY_SIZE(ldo_vaux56_voltages),
 | 
						|
			.volt_table	= ldo_vaux56_voltages,
 | 
						|
		},
 | 
						|
		.load_lp_uA		= 2000,
 | 
						|
		/* values for CtrlVaux5 register */
 | 
						|
		.update_bank		= 0x01,
 | 
						|
		.update_reg		= 0x55,
 | 
						|
		.update_mask		= 0x18,
 | 
						|
		.update_val		= 0x10,
 | 
						|
		.update_val_idle	= 0x18,
 | 
						|
		.update_val_normal	= 0x10,
 | 
						|
		.voltage_bank		= 0x01,
 | 
						|
		.voltage_reg		= 0x55,
 | 
						|
		.voltage_mask		= 0x07,
 | 
						|
	},
 | 
						|
	[AB8505_LDO_AUX6] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-AUX6",
 | 
						|
			.ops		= &ab8500_regulator_volt_mode_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB8505_LDO_AUX6,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= ARRAY_SIZE(ldo_vaux56_voltages),
 | 
						|
			.volt_table	= ldo_vaux56_voltages,
 | 
						|
		},
 | 
						|
		.load_lp_uA		= 2000,
 | 
						|
		/* values for CtrlVaux6 register */
 | 
						|
		.update_bank		= 0x01,
 | 
						|
		.update_reg		= 0x56,
 | 
						|
		.update_mask		= 0x18,
 | 
						|
		.update_val		= 0x10,
 | 
						|
		.update_val_idle	= 0x18,
 | 
						|
		.update_val_normal	= 0x10,
 | 
						|
		.voltage_bank		= 0x01,
 | 
						|
		.voltage_reg		= 0x56,
 | 
						|
		.voltage_mask		= 0x07,
 | 
						|
	},
 | 
						|
	[AB8505_LDO_INTCORE] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-INTCORE",
 | 
						|
			.ops		= &ab8500_regulator_volt_mode_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB8505_LDO_INTCORE,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= ARRAY_SIZE(ldo_vintcore_voltages),
 | 
						|
			.volt_table	= ldo_vintcore_voltages,
 | 
						|
		},
 | 
						|
		.load_lp_uA		= 5000,
 | 
						|
		.update_bank		= 0x03,
 | 
						|
		.update_reg		= 0x80,
 | 
						|
		.update_mask		= 0x44,
 | 
						|
		.update_val		= 0x04,
 | 
						|
		.update_val_idle	= 0x44,
 | 
						|
		.update_val_normal	= 0x04,
 | 
						|
		.voltage_bank		= 0x03,
 | 
						|
		.voltage_reg		= 0x80,
 | 
						|
		.voltage_mask		= 0x38,
 | 
						|
	},
 | 
						|
 | 
						|
	/*
 | 
						|
	 * Fixed Voltage Regulators
 | 
						|
	 *   name, fixed mV,
 | 
						|
	 *   update bank, reg, mask, enable val
 | 
						|
	 */
 | 
						|
	[AB8505_LDO_ADC] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-ADC",
 | 
						|
			.ops		= &ab8500_regulator_mode_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB8505_LDO_ADC,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= 1,
 | 
						|
			.volt_table	= fixed_2000000_voltage,
 | 
						|
			.enable_time	= 10000,
 | 
						|
		},
 | 
						|
		.load_lp_uA		= 1000,
 | 
						|
		.update_bank		= 0x03,
 | 
						|
		.update_reg		= 0x80,
 | 
						|
		.update_mask		= 0x82,
 | 
						|
		.update_val		= 0x02,
 | 
						|
		.update_val_idle	= 0x82,
 | 
						|
		.update_val_normal	= 0x02,
 | 
						|
	},
 | 
						|
	[AB8505_LDO_USB] = {
 | 
						|
		.desc = {
 | 
						|
			.name           = "LDO-USB",
 | 
						|
			.ops            = &ab8500_regulator_mode_ops,
 | 
						|
			.type           = REGULATOR_VOLTAGE,
 | 
						|
			.id             = AB8505_LDO_USB,
 | 
						|
			.owner          = THIS_MODULE,
 | 
						|
			.n_voltages     = 1,
 | 
						|
			.volt_table	= fixed_3300000_voltage,
 | 
						|
		},
 | 
						|
		.update_bank            = 0x03,
 | 
						|
		.update_reg             = 0x82,
 | 
						|
		.update_mask            = 0x03,
 | 
						|
		.update_val		= 0x01,
 | 
						|
		.update_val_idle	= 0x03,
 | 
						|
		.update_val_normal	= 0x01,
 | 
						|
	},
 | 
						|
	[AB8505_LDO_AUDIO] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-AUDIO",
 | 
						|
			.ops		= &ab8500_regulator_volt_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB8505_LDO_AUDIO,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= ARRAY_SIZE(ldo_vaudio_voltages),
 | 
						|
			.volt_table	= ldo_vaudio_voltages,
 | 
						|
		},
 | 
						|
		.update_bank		= 0x03,
 | 
						|
		.update_reg		= 0x83,
 | 
						|
		.update_mask		= 0x02,
 | 
						|
		.update_val		= 0x02,
 | 
						|
		.voltage_bank		= 0x01,
 | 
						|
		.voltage_reg		= 0x57,
 | 
						|
		.voltage_mask		= 0x70,
 | 
						|
	},
 | 
						|
	[AB8505_LDO_ANAMIC1] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-ANAMIC1",
 | 
						|
			.ops		= &ab8500_regulator_anamic_mode_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB8505_LDO_ANAMIC1,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= 1,
 | 
						|
			.volt_table	= fixed_2050000_voltage,
 | 
						|
		},
 | 
						|
		.shared_mode		= &ldo_anamic1_shared,
 | 
						|
		.update_bank		= 0x03,
 | 
						|
		.update_reg		= 0x83,
 | 
						|
		.update_mask		= 0x08,
 | 
						|
		.update_val		= 0x08,
 | 
						|
		.mode_bank		= 0x01,
 | 
						|
		.mode_reg		= 0x54,
 | 
						|
		.mode_mask		= 0x04,
 | 
						|
		.mode_val_idle		= 0x04,
 | 
						|
		.mode_val_normal	= 0x00,
 | 
						|
	},
 | 
						|
	[AB8505_LDO_ANAMIC2] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-ANAMIC2",
 | 
						|
			.ops		= &ab8500_regulator_anamic_mode_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB8505_LDO_ANAMIC2,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= 1,
 | 
						|
			.volt_table	= fixed_2050000_voltage,
 | 
						|
		},
 | 
						|
		.shared_mode		= &ldo_anamic2_shared,
 | 
						|
		.update_bank		= 0x03,
 | 
						|
		.update_reg		= 0x83,
 | 
						|
		.update_mask		= 0x10,
 | 
						|
		.update_val		= 0x10,
 | 
						|
		.mode_bank		= 0x01,
 | 
						|
		.mode_reg		= 0x54,
 | 
						|
		.mode_mask		= 0x04,
 | 
						|
		.mode_val_idle		= 0x04,
 | 
						|
		.mode_val_normal	= 0x00,
 | 
						|
	},
 | 
						|
	[AB8505_LDO_AUX8] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-AUX8",
 | 
						|
			.ops		= &ab8500_regulator_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB8505_LDO_AUX8,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= 1,
 | 
						|
			.volt_table	= fixed_1800000_voltage,
 | 
						|
		},
 | 
						|
		.update_bank		= 0x03,
 | 
						|
		.update_reg		= 0x83,
 | 
						|
		.update_mask		= 0x04,
 | 
						|
		.update_val		= 0x04,
 | 
						|
	},
 | 
						|
	/*
 | 
						|
	 * Regulators with fixed voltage and normal/idle modes
 | 
						|
	 */
 | 
						|
	[AB8505_LDO_ANA] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-ANA",
 | 
						|
			.ops		= &ab8500_regulator_volt_mode_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB8505_LDO_ANA,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= ARRAY_SIZE(ldo_vana_voltages),
 | 
						|
			.volt_table	= ldo_vana_voltages,
 | 
						|
		},
 | 
						|
		.load_lp_uA		= 1000,
 | 
						|
		.update_bank		= 0x04,
 | 
						|
		.update_reg		= 0x06,
 | 
						|
		.update_mask		= 0x0c,
 | 
						|
		.update_val		= 0x04,
 | 
						|
		.update_val_idle	= 0x0c,
 | 
						|
		.update_val_normal	= 0x04,
 | 
						|
		.voltage_bank		= 0x04,
 | 
						|
		.voltage_reg		= 0x29,
 | 
						|
		.voltage_mask		= 0x7,
 | 
						|
	},
 | 
						|
};
 | 
						|
 | 
						|
/* AB9540 regulator information */
 | 
						|
static struct ab8500_regulator_info
 | 
						|
		ab9540_regulator_info[AB9540_NUM_REGULATORS] = {
 | 
						|
	/*
 | 
						|
	 * Variable Voltage Regulators
 | 
						|
	 *   name, min mV, max mV,
 | 
						|
	 *   update bank, reg, mask, enable val
 | 
						|
	 *   volt bank, reg, mask
 | 
						|
	 */
 | 
						|
	[AB9540_LDO_AUX1] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-AUX1",
 | 
						|
			.ops		= &ab8500_regulator_volt_mode_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB9540_LDO_AUX1,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= ARRAY_SIZE(ldo_vauxn_voltages),
 | 
						|
			.volt_table	= ldo_vauxn_voltages,
 | 
						|
		},
 | 
						|
		.load_lp_uA		= 5000,
 | 
						|
		.update_bank		= 0x04,
 | 
						|
		.update_reg		= 0x09,
 | 
						|
		.update_mask		= 0x03,
 | 
						|
		.update_val		= 0x01,
 | 
						|
		.update_val_idle	= 0x03,
 | 
						|
		.update_val_normal	= 0x01,
 | 
						|
		.voltage_bank		= 0x04,
 | 
						|
		.voltage_reg		= 0x1f,
 | 
						|
		.voltage_mask		= 0x0f,
 | 
						|
	},
 | 
						|
	[AB9540_LDO_AUX2] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-AUX2",
 | 
						|
			.ops		= &ab8500_regulator_volt_mode_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB9540_LDO_AUX2,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= ARRAY_SIZE(ldo_vauxn_voltages),
 | 
						|
			.volt_table	= ldo_vauxn_voltages,
 | 
						|
		},
 | 
						|
		.load_lp_uA		= 5000,
 | 
						|
		.update_bank		= 0x04,
 | 
						|
		.update_reg		= 0x09,
 | 
						|
		.update_mask		= 0x0c,
 | 
						|
		.update_val		= 0x04,
 | 
						|
		.update_val_idle	= 0x0c,
 | 
						|
		.update_val_normal	= 0x04,
 | 
						|
		.voltage_bank		= 0x04,
 | 
						|
		.voltage_reg		= 0x20,
 | 
						|
		.voltage_mask		= 0x0f,
 | 
						|
	},
 | 
						|
	[AB9540_LDO_AUX3] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-AUX3",
 | 
						|
			.ops		= &ab8500_regulator_volt_mode_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB9540_LDO_AUX3,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= ARRAY_SIZE(ldo_vaux3_voltages),
 | 
						|
			.volt_table	= ldo_vaux3_voltages,
 | 
						|
		},
 | 
						|
		.load_lp_uA		= 5000,
 | 
						|
		.update_bank		= 0x04,
 | 
						|
		.update_reg		= 0x0a,
 | 
						|
		.update_mask		= 0x03,
 | 
						|
		.update_val		= 0x01,
 | 
						|
		.update_val_idle	= 0x03,
 | 
						|
		.update_val_normal	= 0x01,
 | 
						|
		.voltage_bank		= 0x04,
 | 
						|
		.voltage_reg		= 0x21,
 | 
						|
		.voltage_mask		= 0x07,
 | 
						|
	},
 | 
						|
	[AB9540_LDO_AUX4] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-AUX4",
 | 
						|
			.ops		= &ab8500_regulator_volt_mode_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB9540_LDO_AUX4,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= ARRAY_SIZE(ldo_vauxn_voltages),
 | 
						|
			.volt_table	= ldo_vauxn_voltages,
 | 
						|
		},
 | 
						|
		.load_lp_uA		= 5000,
 | 
						|
		/* values for Vaux4Regu register */
 | 
						|
		.update_bank		= 0x04,
 | 
						|
		.update_reg		= 0x2e,
 | 
						|
		.update_mask		= 0x03,
 | 
						|
		.update_val		= 0x01,
 | 
						|
		.update_val_idle	= 0x03,
 | 
						|
		.update_val_normal	= 0x01,
 | 
						|
		/* values for Vaux4SEL register */
 | 
						|
		.voltage_bank		= 0x04,
 | 
						|
		.voltage_reg		= 0x2f,
 | 
						|
		.voltage_mask		= 0x0f,
 | 
						|
	},
 | 
						|
	[AB9540_LDO_INTCORE] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-INTCORE",
 | 
						|
			.ops		= &ab8500_regulator_volt_mode_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB9540_LDO_INTCORE,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= ARRAY_SIZE(ldo_vintcore_voltages),
 | 
						|
			.volt_table	= ldo_vintcore_voltages,
 | 
						|
		},
 | 
						|
		.load_lp_uA		= 5000,
 | 
						|
		.update_bank		= 0x03,
 | 
						|
		.update_reg		= 0x80,
 | 
						|
		.update_mask		= 0x44,
 | 
						|
		.update_val		= 0x44,
 | 
						|
		.update_val_idle	= 0x44,
 | 
						|
		.update_val_normal	= 0x04,
 | 
						|
		.voltage_bank		= 0x03,
 | 
						|
		.voltage_reg		= 0x80,
 | 
						|
		.voltage_mask		= 0x38,
 | 
						|
	},
 | 
						|
 | 
						|
	/*
 | 
						|
	 * Fixed Voltage Regulators
 | 
						|
	 *   name, fixed mV,
 | 
						|
	 *   update bank, reg, mask, enable val
 | 
						|
	 */
 | 
						|
	[AB9540_LDO_TVOUT] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-TVOUT",
 | 
						|
			.ops		= &ab8500_regulator_mode_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB9540_LDO_TVOUT,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= 1,
 | 
						|
			.volt_table	= fixed_2000000_voltage,
 | 
						|
			.enable_time	= 10000,
 | 
						|
		},
 | 
						|
		.load_lp_uA		= 1000,
 | 
						|
		.update_bank		= 0x03,
 | 
						|
		.update_reg		= 0x80,
 | 
						|
		.update_mask		= 0x82,
 | 
						|
		.update_val		= 0x02,
 | 
						|
		.update_val_idle	= 0x82,
 | 
						|
		.update_val_normal	= 0x02,
 | 
						|
	},
 | 
						|
	[AB9540_LDO_USB] = {
 | 
						|
		.desc = {
 | 
						|
			.name           = "LDO-USB",
 | 
						|
			.ops            = &ab8500_regulator_ops,
 | 
						|
			.type           = REGULATOR_VOLTAGE,
 | 
						|
			.id             = AB9540_LDO_USB,
 | 
						|
			.owner          = THIS_MODULE,
 | 
						|
			.n_voltages     = 1,
 | 
						|
			.volt_table	= fixed_3300000_voltage,
 | 
						|
		},
 | 
						|
		.update_bank            = 0x03,
 | 
						|
		.update_reg             = 0x82,
 | 
						|
		.update_mask            = 0x03,
 | 
						|
		.update_val		= 0x01,
 | 
						|
		.update_val_idle	= 0x03,
 | 
						|
		.update_val_normal	= 0x01,
 | 
						|
	},
 | 
						|
	[AB9540_LDO_AUDIO] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-AUDIO",
 | 
						|
			.ops		= &ab8500_regulator_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB9540_LDO_AUDIO,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= 1,
 | 
						|
			.volt_table	= fixed_2000000_voltage,
 | 
						|
		},
 | 
						|
		.update_bank		= 0x03,
 | 
						|
		.update_reg		= 0x83,
 | 
						|
		.update_mask		= 0x02,
 | 
						|
		.update_val		= 0x02,
 | 
						|
	},
 | 
						|
	[AB9540_LDO_ANAMIC1] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-ANAMIC1",
 | 
						|
			.ops		= &ab8500_regulator_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB9540_LDO_ANAMIC1,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= 1,
 | 
						|
			.volt_table	= fixed_2050000_voltage,
 | 
						|
		},
 | 
						|
		.update_bank		= 0x03,
 | 
						|
		.update_reg		= 0x83,
 | 
						|
		.update_mask		= 0x08,
 | 
						|
		.update_val		= 0x08,
 | 
						|
	},
 | 
						|
	[AB9540_LDO_ANAMIC2] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-ANAMIC2",
 | 
						|
			.ops		= &ab8500_regulator_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB9540_LDO_ANAMIC2,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= 1,
 | 
						|
			.volt_table	= fixed_2050000_voltage,
 | 
						|
		},
 | 
						|
		.update_bank		= 0x03,
 | 
						|
		.update_reg		= 0x83,
 | 
						|
		.update_mask		= 0x10,
 | 
						|
		.update_val		= 0x10,
 | 
						|
	},
 | 
						|
	[AB9540_LDO_DMIC] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-DMIC",
 | 
						|
			.ops		= &ab8500_regulator_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB9540_LDO_DMIC,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= 1,
 | 
						|
			.volt_table	= fixed_1800000_voltage,
 | 
						|
		},
 | 
						|
		.update_bank		= 0x03,
 | 
						|
		.update_reg		= 0x83,
 | 
						|
		.update_mask		= 0x04,
 | 
						|
		.update_val		= 0x04,
 | 
						|
	},
 | 
						|
 | 
						|
	/*
 | 
						|
	 * Regulators with fixed voltage and normal/idle modes
 | 
						|
	 */
 | 
						|
	[AB9540_LDO_ANA] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-ANA",
 | 
						|
			.ops		= &ab8500_regulator_mode_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB9540_LDO_ANA,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= 1,
 | 
						|
			.volt_table	= fixed_1200000_voltage,
 | 
						|
		},
 | 
						|
		.load_lp_uA		= 1000,
 | 
						|
		.update_bank		= 0x04,
 | 
						|
		.update_reg		= 0x06,
 | 
						|
		.update_mask		= 0x0c,
 | 
						|
		.update_val		= 0x08,
 | 
						|
		.update_val_idle	= 0x0c,
 | 
						|
		.update_val_normal	= 0x08,
 | 
						|
	},
 | 
						|
};
 | 
						|
 | 
						|
/* AB8540 regulator information */
 | 
						|
static struct ab8500_regulator_info
 | 
						|
		ab8540_regulator_info[AB8540_NUM_REGULATORS] = {
 | 
						|
	/*
 | 
						|
	 * Variable Voltage Regulators
 | 
						|
	 *   name, min mV, max mV,
 | 
						|
	 *   update bank, reg, mask, enable val
 | 
						|
	 *   volt bank, reg, mask
 | 
						|
	 */
 | 
						|
	[AB8540_LDO_AUX1] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-AUX1",
 | 
						|
			.ops		= &ab8500_regulator_volt_mode_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB8540_LDO_AUX1,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= ARRAY_SIZE(ldo_vauxn_voltages),
 | 
						|
			.volt_table	= ldo_vauxn_voltages,
 | 
						|
		},
 | 
						|
		.load_lp_uA		= 5000,
 | 
						|
		.update_bank		= 0x04,
 | 
						|
		.update_reg		= 0x09,
 | 
						|
		.update_mask		= 0x03,
 | 
						|
		.update_val		= 0x01,
 | 
						|
		.update_val_idle	= 0x03,
 | 
						|
		.update_val_normal	= 0x01,
 | 
						|
		.voltage_bank		= 0x04,
 | 
						|
		.voltage_reg		= 0x1f,
 | 
						|
		.voltage_mask		= 0x0f,
 | 
						|
	},
 | 
						|
	[AB8540_LDO_AUX2] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-AUX2",
 | 
						|
			.ops		= &ab8500_regulator_volt_mode_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB8540_LDO_AUX2,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= ARRAY_SIZE(ldo_vauxn_voltages),
 | 
						|
			.volt_table	= ldo_vauxn_voltages,
 | 
						|
		},
 | 
						|
		.load_lp_uA		= 5000,
 | 
						|
		.update_bank		= 0x04,
 | 
						|
		.update_reg		= 0x09,
 | 
						|
		.update_mask		= 0x0c,
 | 
						|
		.update_val		= 0x04,
 | 
						|
		.update_val_idle	= 0x0c,
 | 
						|
		.update_val_normal	= 0x04,
 | 
						|
		.voltage_bank		= 0x04,
 | 
						|
		.voltage_reg		= 0x20,
 | 
						|
		.voltage_mask		= 0x0f,
 | 
						|
	},
 | 
						|
	[AB8540_LDO_AUX3] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-AUX3",
 | 
						|
			.ops		= &ab8540_aux3_regulator_volt_mode_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB8540_LDO_AUX3,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= ARRAY_SIZE(ldo_vaux3_ab8540_voltages),
 | 
						|
			.volt_table	= ldo_vaux3_ab8540_voltages,
 | 
						|
		},
 | 
						|
		.load_lp_uA		= 5000,
 | 
						|
		.update_bank		= 0x04,
 | 
						|
		.update_reg		= 0x0a,
 | 
						|
		.update_mask		= 0x03,
 | 
						|
		.update_val		= 0x01,
 | 
						|
		.update_val_idle	= 0x03,
 | 
						|
		.update_val_normal	= 0x01,
 | 
						|
		.voltage_bank		= 0x04,
 | 
						|
		.voltage_reg		= 0x21,
 | 
						|
		.voltage_mask		= 0x07,
 | 
						|
		.expand_register = {
 | 
						|
			.voltage_limit		= 8,
 | 
						|
			.voltage_bank		= 0x04,
 | 
						|
			.voltage_reg		= 0x01,
 | 
						|
			.voltage_mask		= 0x10,
 | 
						|
		}
 | 
						|
	},
 | 
						|
	[AB8540_LDO_AUX4] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-AUX4",
 | 
						|
			.ops		= &ab8500_regulator_volt_mode_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB8540_LDO_AUX4,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= ARRAY_SIZE(ldo_vauxn_voltages),
 | 
						|
			.volt_table	= ldo_vauxn_voltages,
 | 
						|
		},
 | 
						|
		.load_lp_uA		= 5000,
 | 
						|
		/* values for Vaux4Regu register */
 | 
						|
		.update_bank		= 0x04,
 | 
						|
		.update_reg		= 0x2e,
 | 
						|
		.update_mask		= 0x03,
 | 
						|
		.update_val		= 0x01,
 | 
						|
		.update_val_idle	= 0x03,
 | 
						|
		.update_val_normal	= 0x01,
 | 
						|
		/* values for Vaux4SEL register */
 | 
						|
		.voltage_bank		= 0x04,
 | 
						|
		.voltage_reg		= 0x2f,
 | 
						|
		.voltage_mask		= 0x0f,
 | 
						|
	},
 | 
						|
	[AB8540_LDO_AUX5] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-AUX5",
 | 
						|
			.ops		= &ab8500_regulator_volt_mode_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB8540_LDO_AUX5,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= ARRAY_SIZE(ldo_vaux56_ab8540_voltages),
 | 
						|
			.volt_table	= ldo_vaux56_ab8540_voltages,
 | 
						|
		},
 | 
						|
		.load_lp_uA		= 20000,
 | 
						|
		/* values for Vaux5Regu register */
 | 
						|
		.update_bank		= 0x04,
 | 
						|
		.update_reg		= 0x32,
 | 
						|
		.update_mask		= 0x03,
 | 
						|
		.update_val		= 0x01,
 | 
						|
		.update_val_idle	= 0x03,
 | 
						|
		.update_val_normal	= 0x01,
 | 
						|
		/* values for Vaux5SEL register */
 | 
						|
		.voltage_bank		= 0x04,
 | 
						|
		.voltage_reg		= 0x33,
 | 
						|
		.voltage_mask		= 0x3f,
 | 
						|
	},
 | 
						|
	[AB8540_LDO_AUX6] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-AUX6",
 | 
						|
			.ops		= &ab8500_regulator_volt_mode_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB8540_LDO_AUX6,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= ARRAY_SIZE(ldo_vaux56_ab8540_voltages),
 | 
						|
			.volt_table	= ldo_vaux56_ab8540_voltages,
 | 
						|
		},
 | 
						|
		.load_lp_uA		= 20000,
 | 
						|
		/* values for Vaux6Regu register */
 | 
						|
		.update_bank		= 0x04,
 | 
						|
		.update_reg		= 0x35,
 | 
						|
		.update_mask		= 0x03,
 | 
						|
		.update_val		= 0x01,
 | 
						|
		.update_val_idle	= 0x03,
 | 
						|
		.update_val_normal	= 0x01,
 | 
						|
		/* values for Vaux6SEL register */
 | 
						|
		.voltage_bank		= 0x04,
 | 
						|
		.voltage_reg		= 0x36,
 | 
						|
		.voltage_mask		= 0x3f,
 | 
						|
	},
 | 
						|
	[AB8540_LDO_INTCORE] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-INTCORE",
 | 
						|
			.ops		= &ab8500_regulator_volt_mode_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB8540_LDO_INTCORE,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= ARRAY_SIZE(ldo_vintcore_voltages),
 | 
						|
			.volt_table	= ldo_vintcore_voltages,
 | 
						|
		},
 | 
						|
		.load_lp_uA		= 5000,
 | 
						|
		.update_bank		= 0x03,
 | 
						|
		.update_reg		= 0x80,
 | 
						|
		.update_mask		= 0x44,
 | 
						|
		.update_val		= 0x44,
 | 
						|
		.update_val_idle	= 0x44,
 | 
						|
		.update_val_normal	= 0x04,
 | 
						|
		.voltage_bank		= 0x03,
 | 
						|
		.voltage_reg		= 0x80,
 | 
						|
		.voltage_mask		= 0x38,
 | 
						|
	},
 | 
						|
 | 
						|
	/*
 | 
						|
	 * Fixed Voltage Regulators
 | 
						|
	 *   name, fixed mV,
 | 
						|
	 *   update bank, reg, mask, enable val
 | 
						|
	 */
 | 
						|
	[AB8540_LDO_TVOUT] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-TVOUT",
 | 
						|
			.ops		= &ab8500_regulator_mode_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB8540_LDO_TVOUT,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= 1,
 | 
						|
			.volt_table     = fixed_2000000_voltage,
 | 
						|
			.enable_time	= 10000,
 | 
						|
		},
 | 
						|
		.load_lp_uA		= 1000,
 | 
						|
		.update_bank		= 0x03,
 | 
						|
		.update_reg		= 0x80,
 | 
						|
		.update_mask		= 0x82,
 | 
						|
		.update_val		= 0x02,
 | 
						|
		.update_val_idle	= 0x82,
 | 
						|
		.update_val_normal	= 0x02,
 | 
						|
	},
 | 
						|
	[AB8540_LDO_AUDIO] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-AUDIO",
 | 
						|
			.ops		= &ab8500_regulator_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB8540_LDO_AUDIO,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= 1,
 | 
						|
			.volt_table	= fixed_2000000_voltage,
 | 
						|
		},
 | 
						|
		.update_bank		= 0x03,
 | 
						|
		.update_reg		= 0x83,
 | 
						|
		.update_mask		= 0x02,
 | 
						|
		.update_val		= 0x02,
 | 
						|
	},
 | 
						|
	[AB8540_LDO_ANAMIC1] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-ANAMIC1",
 | 
						|
			.ops		= &ab8500_regulator_anamic_mode_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB8540_LDO_ANAMIC1,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= 1,
 | 
						|
			.volt_table	= fixed_2050000_voltage,
 | 
						|
		},
 | 
						|
		.shared_mode		= &ab8540_ldo_anamic1_shared,
 | 
						|
		.update_bank		= 0x03,
 | 
						|
		.update_reg		= 0x83,
 | 
						|
		.update_mask		= 0x08,
 | 
						|
		.update_val		= 0x08,
 | 
						|
		.mode_bank		= 0x03,
 | 
						|
		.mode_reg		= 0x83,
 | 
						|
		.mode_mask		= 0x20,
 | 
						|
		.mode_val_idle		= 0x20,
 | 
						|
		.mode_val_normal	= 0x00,
 | 
						|
	},
 | 
						|
	[AB8540_LDO_ANAMIC2] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-ANAMIC2",
 | 
						|
			.ops		= &ab8500_regulator_anamic_mode_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB8540_LDO_ANAMIC2,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= 1,
 | 
						|
			.volt_table	= fixed_2050000_voltage,
 | 
						|
		},
 | 
						|
		.shared_mode		= &ab8540_ldo_anamic2_shared,
 | 
						|
		.update_bank		= 0x03,
 | 
						|
		.update_reg		= 0x83,
 | 
						|
		.update_mask		= 0x10,
 | 
						|
		.update_val		= 0x10,
 | 
						|
		.mode_bank		= 0x03,
 | 
						|
		.mode_reg		= 0x83,
 | 
						|
		.mode_mask		= 0x20,
 | 
						|
		.mode_val_idle		= 0x20,
 | 
						|
		.mode_val_normal	= 0x00,
 | 
						|
	},
 | 
						|
	[AB8540_LDO_DMIC] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-DMIC",
 | 
						|
			.ops		= &ab8500_regulator_volt_mode_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB8540_LDO_DMIC,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= ARRAY_SIZE(ldo_vdmic_voltages),
 | 
						|
			.volt_table	= ldo_vdmic_voltages,
 | 
						|
		},
 | 
						|
		.load_lp_uA		= 1000,
 | 
						|
		.update_bank		= 0x03,
 | 
						|
		.update_reg		= 0x83,
 | 
						|
		.update_mask		= 0x04,
 | 
						|
		.update_val		= 0x04,
 | 
						|
		.voltage_bank		= 0x03,
 | 
						|
		.voltage_reg		= 0x83,
 | 
						|
		.voltage_mask		= 0xc0,
 | 
						|
	},
 | 
						|
 | 
						|
	/*
 | 
						|
	 * Regulators with fixed voltage and normal/idle modes
 | 
						|
	 */
 | 
						|
	[AB8540_LDO_ANA] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-ANA",
 | 
						|
			.ops		= &ab8500_regulator_mode_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB8540_LDO_ANA,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages	= 1,
 | 
						|
			.volt_table     = fixed_1200000_voltage,
 | 
						|
		},
 | 
						|
		.load_lp_uA		= 1000,
 | 
						|
		.update_bank		= 0x04,
 | 
						|
		.update_reg		= 0x06,
 | 
						|
		.update_mask		= 0x0c,
 | 
						|
		.update_val		= 0x04,
 | 
						|
		.update_val_idle	= 0x0c,
 | 
						|
		.update_val_normal	= 0x04,
 | 
						|
	},
 | 
						|
	[AB8540_LDO_SDIO] = {
 | 
						|
		.desc = {
 | 
						|
			.name		= "LDO-SDIO",
 | 
						|
			.ops		= &ab8500_regulator_volt_mode_ops,
 | 
						|
			.type		= REGULATOR_VOLTAGE,
 | 
						|
			.id		= AB8540_LDO_SDIO,
 | 
						|
			.owner		= THIS_MODULE,
 | 
						|
			.n_voltages 	= ARRAY_SIZE(ldo_sdio_voltages),
 | 
						|
			.volt_table	= ldo_sdio_voltages,
 | 
						|
		},
 | 
						|
		.load_lp_uA		= 5000,
 | 
						|
		.update_bank		= 0x03,
 | 
						|
		.update_reg		= 0x88,
 | 
						|
		.update_mask		= 0x30,
 | 
						|
		.update_val		= 0x10,
 | 
						|
		.update_val_idle	= 0x30,
 | 
						|
		.update_val_normal	= 0x10,
 | 
						|
		.voltage_bank		= 0x03,
 | 
						|
		.voltage_reg		= 0x88,
 | 
						|
		.voltage_mask		= 0x07,
 | 
						|
	},
 | 
						|
};
 | 
						|
 | 
						|
static struct ab8500_shared_mode ldo_anamic1_shared = {
 | 
						|
	.shared_regulator = &ab8505_regulator_info[AB8505_LDO_ANAMIC2],
 | 
						|
};
 | 
						|
 | 
						|
static struct ab8500_shared_mode ldo_anamic2_shared = {
 | 
						|
	.shared_regulator = &ab8505_regulator_info[AB8505_LDO_ANAMIC1],
 | 
						|
};
 | 
						|
 | 
						|
static struct ab8500_shared_mode ab8540_ldo_anamic1_shared = {
 | 
						|
	.shared_regulator = &ab8540_regulator_info[AB8540_LDO_ANAMIC2],
 | 
						|
};
 | 
						|
 | 
						|
static struct ab8500_shared_mode ab8540_ldo_anamic2_shared = {
 | 
						|
	.shared_regulator = &ab8540_regulator_info[AB8540_LDO_ANAMIC1],
 | 
						|
};
 | 
						|
 | 
						|
struct ab8500_reg_init {
 | 
						|
	u8 bank;
 | 
						|
	u8 addr;
 | 
						|
	u8 mask;
 | 
						|
};
 | 
						|
 | 
						|
#define REG_INIT(_id, _bank, _addr, _mask)	\
 | 
						|
	[_id] = {				\
 | 
						|
		.bank = _bank,			\
 | 
						|
		.addr = _addr,			\
 | 
						|
		.mask = _mask,			\
 | 
						|
	}
 | 
						|
 | 
						|
/* AB8500 register init */
 | 
						|
static struct ab8500_reg_init ab8500_reg_init[] = {
 | 
						|
	/*
 | 
						|
	 * 0x30, VanaRequestCtrl
 | 
						|
	 * 0xc0, VextSupply1RequestCtrl
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8500_REGUREQUESTCTRL2,	0x03, 0x04, 0xf0),
 | 
						|
	/*
 | 
						|
	 * 0x03, VextSupply2RequestCtrl
 | 
						|
	 * 0x0c, VextSupply3RequestCtrl
 | 
						|
	 * 0x30, Vaux1RequestCtrl
 | 
						|
	 * 0xc0, Vaux2RequestCtrl
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8500_REGUREQUESTCTRL3,	0x03, 0x05, 0xff),
 | 
						|
	/*
 | 
						|
	 * 0x03, Vaux3RequestCtrl
 | 
						|
	 * 0x04, SwHPReq
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8500_REGUREQUESTCTRL4,	0x03, 0x06, 0x07),
 | 
						|
	/*
 | 
						|
	 * 0x08, VanaSysClkReq1HPValid
 | 
						|
	 * 0x20, Vaux1SysClkReq1HPValid
 | 
						|
	 * 0x40, Vaux2SysClkReq1HPValid
 | 
						|
	 * 0x80, Vaux3SysClkReq1HPValid
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8500_REGUSYSCLKREQ1HPVALID1,	0x03, 0x07, 0xe8),
 | 
						|
	/*
 | 
						|
	 * 0x10, VextSupply1SysClkReq1HPValid
 | 
						|
	 * 0x20, VextSupply2SysClkReq1HPValid
 | 
						|
	 * 0x40, VextSupply3SysClkReq1HPValid
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8500_REGUSYSCLKREQ1HPVALID2,	0x03, 0x08, 0x70),
 | 
						|
	/*
 | 
						|
	 * 0x08, VanaHwHPReq1Valid
 | 
						|
	 * 0x20, Vaux1HwHPReq1Valid
 | 
						|
	 * 0x40, Vaux2HwHPReq1Valid
 | 
						|
	 * 0x80, Vaux3HwHPReq1Valid
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8500_REGUHWHPREQ1VALID1,	0x03, 0x09, 0xe8),
 | 
						|
	/*
 | 
						|
	 * 0x01, VextSupply1HwHPReq1Valid
 | 
						|
	 * 0x02, VextSupply2HwHPReq1Valid
 | 
						|
	 * 0x04, VextSupply3HwHPReq1Valid
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8500_REGUHWHPREQ1VALID2,	0x03, 0x0a, 0x07),
 | 
						|
	/*
 | 
						|
	 * 0x08, VanaHwHPReq2Valid
 | 
						|
	 * 0x20, Vaux1HwHPReq2Valid
 | 
						|
	 * 0x40, Vaux2HwHPReq2Valid
 | 
						|
	 * 0x80, Vaux3HwHPReq2Valid
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8500_REGUHWHPREQ2VALID1,	0x03, 0x0b, 0xe8),
 | 
						|
	/*
 | 
						|
	 * 0x01, VextSupply1HwHPReq2Valid
 | 
						|
	 * 0x02, VextSupply2HwHPReq2Valid
 | 
						|
	 * 0x04, VextSupply3HwHPReq2Valid
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8500_REGUHWHPREQ2VALID2,	0x03, 0x0c, 0x07),
 | 
						|
	/*
 | 
						|
	 * 0x20, VanaSwHPReqValid
 | 
						|
	 * 0x80, Vaux1SwHPReqValid
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8500_REGUSWHPREQVALID1,	0x03, 0x0d, 0xa0),
 | 
						|
	/*
 | 
						|
	 * 0x01, Vaux2SwHPReqValid
 | 
						|
	 * 0x02, Vaux3SwHPReqValid
 | 
						|
	 * 0x04, VextSupply1SwHPReqValid
 | 
						|
	 * 0x08, VextSupply2SwHPReqValid
 | 
						|
	 * 0x10, VextSupply3SwHPReqValid
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8500_REGUSWHPREQVALID2,	0x03, 0x0e, 0x1f),
 | 
						|
	/*
 | 
						|
	 * 0x02, SysClkReq2Valid1
 | 
						|
	 * 0x04, SysClkReq3Valid1
 | 
						|
	 * 0x08, SysClkReq4Valid1
 | 
						|
	 * 0x10, SysClkReq5Valid1
 | 
						|
	 * 0x20, SysClkReq6Valid1
 | 
						|
	 * 0x40, SysClkReq7Valid1
 | 
						|
	 * 0x80, SysClkReq8Valid1
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8500_REGUSYSCLKREQVALID1,	0x03, 0x0f, 0xfe),
 | 
						|
	/*
 | 
						|
	 * 0x02, SysClkReq2Valid2
 | 
						|
	 * 0x04, SysClkReq3Valid2
 | 
						|
	 * 0x08, SysClkReq4Valid2
 | 
						|
	 * 0x10, SysClkReq5Valid2
 | 
						|
	 * 0x20, SysClkReq6Valid2
 | 
						|
	 * 0x40, SysClkReq7Valid2
 | 
						|
	 * 0x80, SysClkReq8Valid2
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8500_REGUSYSCLKREQVALID2,	0x03, 0x10, 0xfe),
 | 
						|
	/*
 | 
						|
	 * 0x02, VTVoutEna
 | 
						|
	 * 0x04, Vintcore12Ena
 | 
						|
	 * 0x38, Vintcore12Sel
 | 
						|
	 * 0x40, Vintcore12LP
 | 
						|
	 * 0x80, VTVoutLP
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8500_REGUMISC1,		0x03, 0x80, 0xfe),
 | 
						|
	/*
 | 
						|
	 * 0x02, VaudioEna
 | 
						|
	 * 0x04, VdmicEna
 | 
						|
	 * 0x08, Vamic1Ena
 | 
						|
	 * 0x10, Vamic2Ena
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8500_VAUDIOSUPPLY,		0x03, 0x83, 0x1e),
 | 
						|
	/*
 | 
						|
	 * 0x01, Vamic1_dzout
 | 
						|
	 * 0x02, Vamic2_dzout
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8500_REGUCTRL1VAMIC,		0x03, 0x84, 0x03),
 | 
						|
	/*
 | 
						|
	 * 0x03, VpllRegu (NOTE! PRCMU register bits)
 | 
						|
	 * 0x0c, VanaRegu
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8500_VPLLVANAREGU,		0x04, 0x06, 0x0f),
 | 
						|
	/*
 | 
						|
	 * 0x01, VrefDDREna
 | 
						|
	 * 0x02, VrefDDRSleepMode
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8500_VREFDDR,		0x04, 0x07, 0x03),
 | 
						|
	/*
 | 
						|
	 * 0x03, VextSupply1Regu
 | 
						|
	 * 0x0c, VextSupply2Regu
 | 
						|
	 * 0x30, VextSupply3Regu
 | 
						|
	 * 0x40, ExtSupply2Bypass
 | 
						|
	 * 0x80, ExtSupply3Bypass
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8500_EXTSUPPLYREGU,		0x04, 0x08, 0xff),
 | 
						|
	/*
 | 
						|
	 * 0x03, Vaux1Regu
 | 
						|
	 * 0x0c, Vaux2Regu
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8500_VAUX12REGU,		0x04, 0x09, 0x0f),
 | 
						|
	/*
 | 
						|
	 * 0x03, Vaux3Regu
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8500_VRF1VAUX3REGU,		0x04, 0x0a, 0x03),
 | 
						|
	/*
 | 
						|
	 * 0x0f, Vaux1Sel
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8500_VAUX1SEL,		0x04, 0x1f, 0x0f),
 | 
						|
	/*
 | 
						|
	 * 0x0f, Vaux2Sel
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8500_VAUX2SEL,		0x04, 0x20, 0x0f),
 | 
						|
	/*
 | 
						|
	 * 0x07, Vaux3Sel
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8500_VRF1VAUX3SEL,		0x04, 0x21, 0x07),
 | 
						|
	/*
 | 
						|
	 * 0x01, VextSupply12LP
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8500_REGUCTRL2SPARE,		0x04, 0x22, 0x01),
 | 
						|
	/*
 | 
						|
	 * 0x04, Vaux1Disch
 | 
						|
	 * 0x08, Vaux2Disch
 | 
						|
	 * 0x10, Vaux3Disch
 | 
						|
	 * 0x20, Vintcore12Disch
 | 
						|
	 * 0x40, VTVoutDisch
 | 
						|
	 * 0x80, VaudioDisch
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8500_REGUCTRLDISCH,		0x04, 0x43, 0xfc),
 | 
						|
	/*
 | 
						|
	 * 0x02, VanaDisch
 | 
						|
	 * 0x04, VdmicPullDownEna
 | 
						|
	 * 0x10, VdmicDisch
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8500_REGUCTRLDISCH2,		0x04, 0x44, 0x16),
 | 
						|
};
 | 
						|
 | 
						|
/* AB8505 register init */
 | 
						|
static struct ab8500_reg_init ab8505_reg_init[] = {
 | 
						|
	/*
 | 
						|
	 * 0x03, VarmRequestCtrl
 | 
						|
	 * 0x0c, VsmpsCRequestCtrl
 | 
						|
	 * 0x30, VsmpsARequestCtrl
 | 
						|
	 * 0xc0, VsmpsBRequestCtrl
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8505_REGUREQUESTCTRL1,	0x03, 0x03, 0xff),
 | 
						|
	/*
 | 
						|
	 * 0x03, VsafeRequestCtrl
 | 
						|
	 * 0x0c, VpllRequestCtrl
 | 
						|
	 * 0x30, VanaRequestCtrl
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8505_REGUREQUESTCTRL2,	0x03, 0x04, 0x3f),
 | 
						|
	/*
 | 
						|
	 * 0x30, Vaux1RequestCtrl
 | 
						|
	 * 0xc0, Vaux2RequestCtrl
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8505_REGUREQUESTCTRL3,	0x03, 0x05, 0xf0),
 | 
						|
	/*
 | 
						|
	 * 0x03, Vaux3RequestCtrl
 | 
						|
	 * 0x04, SwHPReq
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8505_REGUREQUESTCTRL4,	0x03, 0x06, 0x07),
 | 
						|
	/*
 | 
						|
	 * 0x01, VsmpsASysClkReq1HPValid
 | 
						|
	 * 0x02, VsmpsBSysClkReq1HPValid
 | 
						|
	 * 0x04, VsafeSysClkReq1HPValid
 | 
						|
	 * 0x08, VanaSysClkReq1HPValid
 | 
						|
	 * 0x10, VpllSysClkReq1HPValid
 | 
						|
	 * 0x20, Vaux1SysClkReq1HPValid
 | 
						|
	 * 0x40, Vaux2SysClkReq1HPValid
 | 
						|
	 * 0x80, Vaux3SysClkReq1HPValid
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8505_REGUSYSCLKREQ1HPVALID1,	0x03, 0x07, 0xff),
 | 
						|
	/*
 | 
						|
	 * 0x01, VsmpsCSysClkReq1HPValid
 | 
						|
	 * 0x02, VarmSysClkReq1HPValid
 | 
						|
	 * 0x04, VbbSysClkReq1HPValid
 | 
						|
	 * 0x08, VsmpsMSysClkReq1HPValid
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8505_REGUSYSCLKREQ1HPVALID2,	0x03, 0x08, 0x0f),
 | 
						|
	/*
 | 
						|
	 * 0x01, VsmpsAHwHPReq1Valid
 | 
						|
	 * 0x02, VsmpsBHwHPReq1Valid
 | 
						|
	 * 0x04, VsafeHwHPReq1Valid
 | 
						|
	 * 0x08, VanaHwHPReq1Valid
 | 
						|
	 * 0x10, VpllHwHPReq1Valid
 | 
						|
	 * 0x20, Vaux1HwHPReq1Valid
 | 
						|
	 * 0x40, Vaux2HwHPReq1Valid
 | 
						|
	 * 0x80, Vaux3HwHPReq1Valid
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8505_REGUHWHPREQ1VALID1,	0x03, 0x09, 0xff),
 | 
						|
	/*
 | 
						|
	 * 0x08, VsmpsMHwHPReq1Valid
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8505_REGUHWHPREQ1VALID2,	0x03, 0x0a, 0x08),
 | 
						|
	/*
 | 
						|
	 * 0x01, VsmpsAHwHPReq2Valid
 | 
						|
	 * 0x02, VsmpsBHwHPReq2Valid
 | 
						|
	 * 0x04, VsafeHwHPReq2Valid
 | 
						|
	 * 0x08, VanaHwHPReq2Valid
 | 
						|
	 * 0x10, VpllHwHPReq2Valid
 | 
						|
	 * 0x20, Vaux1HwHPReq2Valid
 | 
						|
	 * 0x40, Vaux2HwHPReq2Valid
 | 
						|
	 * 0x80, Vaux3HwHPReq2Valid
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8505_REGUHWHPREQ2VALID1,	0x03, 0x0b, 0xff),
 | 
						|
	/*
 | 
						|
	 * 0x08, VsmpsMHwHPReq2Valid
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8505_REGUHWHPREQ2VALID2,	0x03, 0x0c, 0x08),
 | 
						|
	/*
 | 
						|
	 * 0x01, VsmpsCSwHPReqValid
 | 
						|
	 * 0x02, VarmSwHPReqValid
 | 
						|
	 * 0x04, VsmpsASwHPReqValid
 | 
						|
	 * 0x08, VsmpsBSwHPReqValid
 | 
						|
	 * 0x10, VsafeSwHPReqValid
 | 
						|
	 * 0x20, VanaSwHPReqValid
 | 
						|
	 * 0x40, VpllSwHPReqValid
 | 
						|
	 * 0x80, Vaux1SwHPReqValid
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8505_REGUSWHPREQVALID1,	0x03, 0x0d, 0xff),
 | 
						|
	/*
 | 
						|
	 * 0x01, Vaux2SwHPReqValid
 | 
						|
	 * 0x02, Vaux3SwHPReqValid
 | 
						|
	 * 0x20, VsmpsMSwHPReqValid
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8505_REGUSWHPREQVALID2,	0x03, 0x0e, 0x23),
 | 
						|
	/*
 | 
						|
	 * 0x02, SysClkReq2Valid1
 | 
						|
	 * 0x04, SysClkReq3Valid1
 | 
						|
	 * 0x08, SysClkReq4Valid1
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8505_REGUSYSCLKREQVALID1,	0x03, 0x0f, 0x0e),
 | 
						|
	/*
 | 
						|
	 * 0x02, SysClkReq2Valid2
 | 
						|
	 * 0x04, SysClkReq3Valid2
 | 
						|
	 * 0x08, SysClkReq4Valid2
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8505_REGUSYSCLKREQVALID2,	0x03, 0x10, 0x0e),
 | 
						|
	/*
 | 
						|
	 * 0x01, Vaux4SwHPReqValid
 | 
						|
	 * 0x02, Vaux4HwHPReq2Valid
 | 
						|
	 * 0x04, Vaux4HwHPReq1Valid
 | 
						|
	 * 0x08, Vaux4SysClkReq1HPValid
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8505_REGUVAUX4REQVALID,	0x03, 0x11, 0x0f),
 | 
						|
	/*
 | 
						|
	 * 0x02, VadcEna
 | 
						|
	 * 0x04, VintCore12Ena
 | 
						|
	 * 0x38, VintCore12Sel
 | 
						|
	 * 0x40, VintCore12LP
 | 
						|
	 * 0x80, VadcLP
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8505_REGUMISC1,		0x03, 0x80, 0xfe),
 | 
						|
	/*
 | 
						|
	 * 0x02, VaudioEna
 | 
						|
	 * 0x04, VdmicEna
 | 
						|
	 * 0x08, Vamic1Ena
 | 
						|
	 * 0x10, Vamic2Ena
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8505_VAUDIOSUPPLY,		0x03, 0x83, 0x1e),
 | 
						|
	/*
 | 
						|
	 * 0x01, Vamic1_dzout
 | 
						|
	 * 0x02, Vamic2_dzout
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8505_REGUCTRL1VAMIC,		0x03, 0x84, 0x03),
 | 
						|
	/*
 | 
						|
	 * 0x03, VsmpsARegu
 | 
						|
	 * 0x0c, VsmpsASelCtrl
 | 
						|
	 * 0x10, VsmpsAAutoMode
 | 
						|
	 * 0x20, VsmpsAPWMMode
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8505_VSMPSAREGU,		0x04, 0x03, 0x3f),
 | 
						|
	/*
 | 
						|
	 * 0x03, VsmpsBRegu
 | 
						|
	 * 0x0c, VsmpsBSelCtrl
 | 
						|
	 * 0x10, VsmpsBAutoMode
 | 
						|
	 * 0x20, VsmpsBPWMMode
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8505_VSMPSBREGU,		0x04, 0x04, 0x3f),
 | 
						|
	/*
 | 
						|
	 * 0x03, VsafeRegu
 | 
						|
	 * 0x0c, VsafeSelCtrl
 | 
						|
	 * 0x10, VsafeAutoMode
 | 
						|
	 * 0x20, VsafePWMMode
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8505_VSAFEREGU,		0x04, 0x05, 0x3f),
 | 
						|
	/*
 | 
						|
	 * 0x03, VpllRegu (NOTE! PRCMU register bits)
 | 
						|
	 * 0x0c, VanaRegu
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8505_VPLLVANAREGU,		0x04, 0x06, 0x0f),
 | 
						|
	/*
 | 
						|
	 * 0x03, VextSupply1Regu
 | 
						|
	 * 0x0c, VextSupply2Regu
 | 
						|
	 * 0x30, VextSupply3Regu
 | 
						|
	 * 0x40, ExtSupply2Bypass
 | 
						|
	 * 0x80, ExtSupply3Bypass
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8505_EXTSUPPLYREGU,		0x04, 0x08, 0xff),
 | 
						|
	/*
 | 
						|
	 * 0x03, Vaux1Regu
 | 
						|
	 * 0x0c, Vaux2Regu
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8505_VAUX12REGU,		0x04, 0x09, 0x0f),
 | 
						|
	/*
 | 
						|
	 * 0x0f, Vaux3Regu
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8505_VRF1VAUX3REGU,		0x04, 0x0a, 0x0f),
 | 
						|
	/*
 | 
						|
	 * 0x3f, VsmpsASel1
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8505_VSMPSASEL1,		0x04, 0x13, 0x3f),
 | 
						|
	/*
 | 
						|
	 * 0x3f, VsmpsASel2
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8505_VSMPSASEL2,		0x04, 0x14, 0x3f),
 | 
						|
	/*
 | 
						|
	 * 0x3f, VsmpsASel3
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8505_VSMPSASEL3,		0x04, 0x15, 0x3f),
 | 
						|
	/*
 | 
						|
	 * 0x3f, VsmpsBSel1
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8505_VSMPSBSEL1,		0x04, 0x17, 0x3f),
 | 
						|
	/*
 | 
						|
	 * 0x3f, VsmpsBSel2
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8505_VSMPSBSEL2,		0x04, 0x18, 0x3f),
 | 
						|
	/*
 | 
						|
	 * 0x3f, VsmpsBSel3
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8505_VSMPSBSEL3,		0x04, 0x19, 0x3f),
 | 
						|
	/*
 | 
						|
	 * 0x7f, VsafeSel1
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8505_VSAFESEL1,		0x04, 0x1b, 0x7f),
 | 
						|
	/*
 | 
						|
	 * 0x3f, VsafeSel2
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8505_VSAFESEL2,		0x04, 0x1c, 0x7f),
 | 
						|
	/*
 | 
						|
	 * 0x3f, VsafeSel3
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8505_VSAFESEL3,		0x04, 0x1d, 0x7f),
 | 
						|
	/*
 | 
						|
	 * 0x0f, Vaux1Sel
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8505_VAUX1SEL,		0x04, 0x1f, 0x0f),
 | 
						|
	/*
 | 
						|
	 * 0x0f, Vaux2Sel
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8505_VAUX2SEL,		0x04, 0x20, 0x0f),
 | 
						|
	/*
 | 
						|
	 * 0x07, Vaux3Sel
 | 
						|
	 * 0x30, VRF1Sel
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8505_VRF1VAUX3SEL,		0x04, 0x21, 0x37),
 | 
						|
	/*
 | 
						|
	 * 0x03, Vaux4RequestCtrl
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8505_VAUX4REQCTRL,		0x04, 0x2d, 0x03),
 | 
						|
	/*
 | 
						|
	 * 0x03, Vaux4Regu
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8505_VAUX4REGU,		0x04, 0x2e, 0x03),
 | 
						|
	/*
 | 
						|
	 * 0x0f, Vaux4Sel
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8505_VAUX4SEL,		0x04, 0x2f, 0x0f),
 | 
						|
	/*
 | 
						|
	 * 0x04, Vaux1Disch
 | 
						|
	 * 0x08, Vaux2Disch
 | 
						|
	 * 0x10, Vaux3Disch
 | 
						|
	 * 0x20, Vintcore12Disch
 | 
						|
	 * 0x40, VTVoutDisch
 | 
						|
	 * 0x80, VaudioDisch
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8505_REGUCTRLDISCH,		0x04, 0x43, 0xfc),
 | 
						|
	/*
 | 
						|
	 * 0x02, VanaDisch
 | 
						|
	 * 0x04, VdmicPullDownEna
 | 
						|
	 * 0x10, VdmicDisch
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8505_REGUCTRLDISCH2,		0x04, 0x44, 0x16),
 | 
						|
	/*
 | 
						|
	 * 0x01, Vaux4Disch
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8505_REGUCTRLDISCH3,		0x04, 0x48, 0x01),
 | 
						|
	/*
 | 
						|
	 * 0x07, Vaux5Sel
 | 
						|
	 * 0x08, Vaux5LP
 | 
						|
	 * 0x10, Vaux5Ena
 | 
						|
	 * 0x20, Vaux5Disch
 | 
						|
	 * 0x40, Vaux5DisSfst
 | 
						|
	 * 0x80, Vaux5DisPulld
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8505_CTRLVAUX5,		0x01, 0x55, 0xff),
 | 
						|
	/*
 | 
						|
	 * 0x07, Vaux6Sel
 | 
						|
	 * 0x08, Vaux6LP
 | 
						|
	 * 0x10, Vaux6Ena
 | 
						|
	 * 0x80, Vaux6DisPulld
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8505_CTRLVAUX6,		0x01, 0x56, 0x9f),
 | 
						|
};
 | 
						|
 | 
						|
/* AB9540 register init */
 | 
						|
static struct ab8500_reg_init ab9540_reg_init[] = {
 | 
						|
	/*
 | 
						|
	 * 0x03, VarmRequestCtrl
 | 
						|
	 * 0x0c, VapeRequestCtrl
 | 
						|
	 * 0x30, Vsmps1RequestCtrl
 | 
						|
	 * 0xc0, Vsmps2RequestCtrl
 | 
						|
	 */
 | 
						|
	REG_INIT(AB9540_REGUREQUESTCTRL1,	0x03, 0x03, 0xff),
 | 
						|
	/*
 | 
						|
	 * 0x03, Vsmps3RequestCtrl
 | 
						|
	 * 0x0c, VpllRequestCtrl
 | 
						|
	 * 0x30, VanaRequestCtrl
 | 
						|
	 * 0xc0, VextSupply1RequestCtrl
 | 
						|
	 */
 | 
						|
	REG_INIT(AB9540_REGUREQUESTCTRL2,	0x03, 0x04, 0xff),
 | 
						|
	/*
 | 
						|
	 * 0x03, VextSupply2RequestCtrl
 | 
						|
	 * 0x0c, VextSupply3RequestCtrl
 | 
						|
	 * 0x30, Vaux1RequestCtrl
 | 
						|
	 * 0xc0, Vaux2RequestCtrl
 | 
						|
	 */
 | 
						|
	REG_INIT(AB9540_REGUREQUESTCTRL3,	0x03, 0x05, 0xff),
 | 
						|
	/*
 | 
						|
	 * 0x03, Vaux3RequestCtrl
 | 
						|
	 * 0x04, SwHPReq
 | 
						|
	 */
 | 
						|
	REG_INIT(AB9540_REGUREQUESTCTRL4,	0x03, 0x06, 0x07),
 | 
						|
	/*
 | 
						|
	 * 0x01, Vsmps1SysClkReq1HPValid
 | 
						|
	 * 0x02, Vsmps2SysClkReq1HPValid
 | 
						|
	 * 0x04, Vsmps3SysClkReq1HPValid
 | 
						|
	 * 0x08, VanaSysClkReq1HPValid
 | 
						|
	 * 0x10, VpllSysClkReq1HPValid
 | 
						|
	 * 0x20, Vaux1SysClkReq1HPValid
 | 
						|
	 * 0x40, Vaux2SysClkReq1HPValid
 | 
						|
	 * 0x80, Vaux3SysClkReq1HPValid
 | 
						|
	 */
 | 
						|
	REG_INIT(AB9540_REGUSYSCLKREQ1HPVALID1,	0x03, 0x07, 0xff),
 | 
						|
	/*
 | 
						|
	 * 0x01, VapeSysClkReq1HPValid
 | 
						|
	 * 0x02, VarmSysClkReq1HPValid
 | 
						|
	 * 0x04, VbbSysClkReq1HPValid
 | 
						|
	 * 0x08, VmodSysClkReq1HPValid
 | 
						|
	 * 0x10, VextSupply1SysClkReq1HPValid
 | 
						|
	 * 0x20, VextSupply2SysClkReq1HPValid
 | 
						|
	 * 0x40, VextSupply3SysClkReq1HPValid
 | 
						|
	 */
 | 
						|
	REG_INIT(AB9540_REGUSYSCLKREQ1HPVALID2,	0x03, 0x08, 0x7f),
 | 
						|
	/*
 | 
						|
	 * 0x01, Vsmps1HwHPReq1Valid
 | 
						|
	 * 0x02, Vsmps2HwHPReq1Valid
 | 
						|
	 * 0x04, Vsmps3HwHPReq1Valid
 | 
						|
	 * 0x08, VanaHwHPReq1Valid
 | 
						|
	 * 0x10, VpllHwHPReq1Valid
 | 
						|
	 * 0x20, Vaux1HwHPReq1Valid
 | 
						|
	 * 0x40, Vaux2HwHPReq1Valid
 | 
						|
	 * 0x80, Vaux3HwHPReq1Valid
 | 
						|
	 */
 | 
						|
	REG_INIT(AB9540_REGUHWHPREQ1VALID1,	0x03, 0x09, 0xff),
 | 
						|
	/*
 | 
						|
	 * 0x01, VextSupply1HwHPReq1Valid
 | 
						|
	 * 0x02, VextSupply2HwHPReq1Valid
 | 
						|
	 * 0x04, VextSupply3HwHPReq1Valid
 | 
						|
	 * 0x08, VmodHwHPReq1Valid
 | 
						|
	 */
 | 
						|
	REG_INIT(AB9540_REGUHWHPREQ1VALID2,	0x03, 0x0a, 0x0f),
 | 
						|
	/*
 | 
						|
	 * 0x01, Vsmps1HwHPReq2Valid
 | 
						|
	 * 0x02, Vsmps2HwHPReq2Valid
 | 
						|
	 * 0x03, Vsmps3HwHPReq2Valid
 | 
						|
	 * 0x08, VanaHwHPReq2Valid
 | 
						|
	 * 0x10, VpllHwHPReq2Valid
 | 
						|
	 * 0x20, Vaux1HwHPReq2Valid
 | 
						|
	 * 0x40, Vaux2HwHPReq2Valid
 | 
						|
	 * 0x80, Vaux3HwHPReq2Valid
 | 
						|
	 */
 | 
						|
	REG_INIT(AB9540_REGUHWHPREQ2VALID1,	0x03, 0x0b, 0xff),
 | 
						|
	/*
 | 
						|
	 * 0x01, VextSupply1HwHPReq2Valid
 | 
						|
	 * 0x02, VextSupply2HwHPReq2Valid
 | 
						|
	 * 0x04, VextSupply3HwHPReq2Valid
 | 
						|
	 * 0x08, VmodHwHPReq2Valid
 | 
						|
	 */
 | 
						|
	REG_INIT(AB9540_REGUHWHPREQ2VALID2,	0x03, 0x0c, 0x0f),
 | 
						|
	/*
 | 
						|
	 * 0x01, VapeSwHPReqValid
 | 
						|
	 * 0x02, VarmSwHPReqValid
 | 
						|
	 * 0x04, Vsmps1SwHPReqValid
 | 
						|
	 * 0x08, Vsmps2SwHPReqValid
 | 
						|
	 * 0x10, Vsmps3SwHPReqValid
 | 
						|
	 * 0x20, VanaSwHPReqValid
 | 
						|
	 * 0x40, VpllSwHPReqValid
 | 
						|
	 * 0x80, Vaux1SwHPReqValid
 | 
						|
	 */
 | 
						|
	REG_INIT(AB9540_REGUSWHPREQVALID1,	0x03, 0x0d, 0xff),
 | 
						|
	/*
 | 
						|
	 * 0x01, Vaux2SwHPReqValid
 | 
						|
	 * 0x02, Vaux3SwHPReqValid
 | 
						|
	 * 0x04, VextSupply1SwHPReqValid
 | 
						|
	 * 0x08, VextSupply2SwHPReqValid
 | 
						|
	 * 0x10, VextSupply3SwHPReqValid
 | 
						|
	 * 0x20, VmodSwHPReqValid
 | 
						|
	 */
 | 
						|
	REG_INIT(AB9540_REGUSWHPREQVALID2,	0x03, 0x0e, 0x3f),
 | 
						|
	/*
 | 
						|
	 * 0x02, SysClkReq2Valid1
 | 
						|
	 * ...
 | 
						|
	 * 0x80, SysClkReq8Valid1
 | 
						|
	 */
 | 
						|
	REG_INIT(AB9540_REGUSYSCLKREQVALID1,	0x03, 0x0f, 0xfe),
 | 
						|
	/*
 | 
						|
	 * 0x02, SysClkReq2Valid2
 | 
						|
	 * ...
 | 
						|
	 * 0x80, SysClkReq8Valid2
 | 
						|
	 */
 | 
						|
	REG_INIT(AB9540_REGUSYSCLKREQVALID2,	0x03, 0x10, 0xfe),
 | 
						|
	/*
 | 
						|
	 * 0x01, Vaux4SwHPReqValid
 | 
						|
	 * 0x02, Vaux4HwHPReq2Valid
 | 
						|
	 * 0x04, Vaux4HwHPReq1Valid
 | 
						|
	 * 0x08, Vaux4SysClkReq1HPValid
 | 
						|
	 */
 | 
						|
	REG_INIT(AB9540_REGUVAUX4REQVALID,	0x03, 0x11, 0x0f),
 | 
						|
	/*
 | 
						|
	 * 0x02, VTVoutEna
 | 
						|
	 * 0x04, Vintcore12Ena
 | 
						|
	 * 0x38, Vintcore12Sel
 | 
						|
	 * 0x40, Vintcore12LP
 | 
						|
	 * 0x80, VTVoutLP
 | 
						|
	 */
 | 
						|
	REG_INIT(AB9540_REGUMISC1,		0x03, 0x80, 0xfe),
 | 
						|
	/*
 | 
						|
	 * 0x02, VaudioEna
 | 
						|
	 * 0x04, VdmicEna
 | 
						|
	 * 0x08, Vamic1Ena
 | 
						|
	 * 0x10, Vamic2Ena
 | 
						|
	 */
 | 
						|
	REG_INIT(AB9540_VAUDIOSUPPLY,		0x03, 0x83, 0x1e),
 | 
						|
	/*
 | 
						|
	 * 0x01, Vamic1_dzout
 | 
						|
	 * 0x02, Vamic2_dzout
 | 
						|
	 */
 | 
						|
	REG_INIT(AB9540_REGUCTRL1VAMIC,		0x03, 0x84, 0x03),
 | 
						|
	/*
 | 
						|
	 * 0x03, Vsmps1Regu
 | 
						|
	 * 0x0c, Vsmps1SelCtrl
 | 
						|
	 * 0x10, Vsmps1AutoMode
 | 
						|
	 * 0x20, Vsmps1PWMMode
 | 
						|
	 */
 | 
						|
	REG_INIT(AB9540_VSMPS1REGU,		0x04, 0x03, 0x3f),
 | 
						|
	/*
 | 
						|
	 * 0x03, Vsmps2Regu
 | 
						|
	 * 0x0c, Vsmps2SelCtrl
 | 
						|
	 * 0x10, Vsmps2AutoMode
 | 
						|
	 * 0x20, Vsmps2PWMMode
 | 
						|
	 */
 | 
						|
	REG_INIT(AB9540_VSMPS2REGU,		0x04, 0x04, 0x3f),
 | 
						|
	/*
 | 
						|
	 * 0x03, Vsmps3Regu
 | 
						|
	 * 0x0c, Vsmps3SelCtrl
 | 
						|
	 * NOTE! PRCMU register
 | 
						|
	 */
 | 
						|
	REG_INIT(AB9540_VSMPS3REGU,		0x04, 0x05, 0x0f),
 | 
						|
	/*
 | 
						|
	 * 0x03, VpllRegu
 | 
						|
	 * 0x0c, VanaRegu
 | 
						|
	 */
 | 
						|
	REG_INIT(AB9540_VPLLVANAREGU,		0x04, 0x06, 0x0f),
 | 
						|
	/*
 | 
						|
	 * 0x03, VextSupply1Regu
 | 
						|
	 * 0x0c, VextSupply2Regu
 | 
						|
	 * 0x30, VextSupply3Regu
 | 
						|
	 * 0x40, ExtSupply2Bypass
 | 
						|
	 * 0x80, ExtSupply3Bypass
 | 
						|
	 */
 | 
						|
	REG_INIT(AB9540_EXTSUPPLYREGU,		0x04, 0x08, 0xff),
 | 
						|
	/*
 | 
						|
	 * 0x03, Vaux1Regu
 | 
						|
	 * 0x0c, Vaux2Regu
 | 
						|
	 */
 | 
						|
	REG_INIT(AB9540_VAUX12REGU,		0x04, 0x09, 0x0f),
 | 
						|
	/*
 | 
						|
	 * 0x0c, Vrf1Regu
 | 
						|
	 * 0x03, Vaux3Regu
 | 
						|
	 */
 | 
						|
	REG_INIT(AB9540_VRF1VAUX3REGU,		0x04, 0x0a, 0x0f),
 | 
						|
	/*
 | 
						|
	 * 0x3f, Vsmps1Sel1
 | 
						|
	 */
 | 
						|
	REG_INIT(AB9540_VSMPS1SEL1,		0x04, 0x13, 0x3f),
 | 
						|
	/*
 | 
						|
	 * 0x3f, Vsmps1Sel2
 | 
						|
	 */
 | 
						|
	REG_INIT(AB9540_VSMPS1SEL2,		0x04, 0x14, 0x3f),
 | 
						|
	/*
 | 
						|
	 * 0x3f, Vsmps1Sel3
 | 
						|
	 */
 | 
						|
	REG_INIT(AB9540_VSMPS1SEL3,		0x04, 0x15, 0x3f),
 | 
						|
	/*
 | 
						|
	 * 0x3f, Vsmps2Sel1
 | 
						|
	 */
 | 
						|
	REG_INIT(AB9540_VSMPS2SEL1,		0x04, 0x17, 0x3f),
 | 
						|
	/*
 | 
						|
	 * 0x3f, Vsmps2Sel2
 | 
						|
	 */
 | 
						|
	REG_INIT(AB9540_VSMPS2SEL2,		0x04, 0x18, 0x3f),
 | 
						|
	/*
 | 
						|
	 * 0x3f, Vsmps2Sel3
 | 
						|
	 */
 | 
						|
	REG_INIT(AB9540_VSMPS2SEL3,		0x04, 0x19, 0x3f),
 | 
						|
	/*
 | 
						|
	 * 0x7f, Vsmps3Sel1
 | 
						|
	 * NOTE! PRCMU register
 | 
						|
	 */
 | 
						|
	REG_INIT(AB9540_VSMPS3SEL1,             0x04, 0x1b, 0x7f),
 | 
						|
	/*
 | 
						|
	 * 0x7f, Vsmps3Sel2
 | 
						|
	 * NOTE! PRCMU register
 | 
						|
	 */
 | 
						|
	REG_INIT(AB9540_VSMPS3SEL2,             0x04, 0x1c, 0x7f),
 | 
						|
	/*
 | 
						|
	 * 0x0f, Vaux1Sel
 | 
						|
	 */
 | 
						|
	REG_INIT(AB9540_VAUX1SEL,		0x04, 0x1f, 0x0f),
 | 
						|
	/*
 | 
						|
	 * 0x0f, Vaux2Sel
 | 
						|
	 */
 | 
						|
	REG_INIT(AB9540_VAUX2SEL,		0x04, 0x20, 0x0f),
 | 
						|
	/*
 | 
						|
	 * 0x07, Vaux3Sel
 | 
						|
	 * 0x30, Vrf1Sel
 | 
						|
	 */
 | 
						|
	REG_INIT(AB9540_VRF1VAUX3SEL,		0x04, 0x21, 0x37),
 | 
						|
	/*
 | 
						|
	 * 0x01, VextSupply12LP
 | 
						|
	 */
 | 
						|
	REG_INIT(AB9540_REGUCTRL2SPARE,		0x04, 0x22, 0x01),
 | 
						|
	/*
 | 
						|
	 * 0x03, Vaux4RequestCtrl
 | 
						|
	 */
 | 
						|
	REG_INIT(AB9540_VAUX4REQCTRL,		0x04, 0x2d, 0x03),
 | 
						|
	/*
 | 
						|
	 * 0x03, Vaux4Regu
 | 
						|
	 */
 | 
						|
	REG_INIT(AB9540_VAUX4REGU,		0x04, 0x2e, 0x03),
 | 
						|
	/*
 | 
						|
	 * 0x08, Vaux4Sel
 | 
						|
	 */
 | 
						|
	REG_INIT(AB9540_VAUX4SEL,		0x04, 0x2f, 0x0f),
 | 
						|
	/*
 | 
						|
	 * 0x01, VpllDisch
 | 
						|
	 * 0x02, Vrf1Disch
 | 
						|
	 * 0x04, Vaux1Disch
 | 
						|
	 * 0x08, Vaux2Disch
 | 
						|
	 * 0x10, Vaux3Disch
 | 
						|
	 * 0x20, Vintcore12Disch
 | 
						|
	 * 0x40, VTVoutDisch
 | 
						|
	 * 0x80, VaudioDisch
 | 
						|
	 */
 | 
						|
	REG_INIT(AB9540_REGUCTRLDISCH,		0x04, 0x43, 0xff),
 | 
						|
	/*
 | 
						|
	 * 0x01, VsimDisch
 | 
						|
	 * 0x02, VanaDisch
 | 
						|
	 * 0x04, VdmicPullDownEna
 | 
						|
	 * 0x08, VpllPullDownEna
 | 
						|
	 * 0x10, VdmicDisch
 | 
						|
	 */
 | 
						|
	REG_INIT(AB9540_REGUCTRLDISCH2,		0x04, 0x44, 0x1f),
 | 
						|
	/*
 | 
						|
	 * 0x01, Vaux4Disch
 | 
						|
	 */
 | 
						|
	REG_INIT(AB9540_REGUCTRLDISCH3,		0x04, 0x48, 0x01),
 | 
						|
};
 | 
						|
 | 
						|
/* AB8540 register init */
 | 
						|
static struct ab8500_reg_init ab8540_reg_init[] = {
 | 
						|
	/*
 | 
						|
	 * 0x01, VSimSycClkReq1Valid
 | 
						|
	 * 0x02, VSimSycClkReq2Valid
 | 
						|
	 * 0x04, VSimSycClkReq3Valid
 | 
						|
	 * 0x08, VSimSycClkReq4Valid
 | 
						|
	 * 0x10, VSimSycClkReq5Valid
 | 
						|
	 * 0x20, VSimSycClkReq6Valid
 | 
						|
	 * 0x40, VSimSycClkReq7Valid
 | 
						|
	 * 0x80, VSimSycClkReq8Valid
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_VSIMSYSCLKCTRL,		0x02, 0x33, 0xff),
 | 
						|
	/*
 | 
						|
	 * 0x03, VarmRequestCtrl
 | 
						|
	 * 0x0c, VapeRequestCtrl
 | 
						|
	 * 0x30, Vsmps1RequestCtrl
 | 
						|
	 * 0xc0, Vsmps2RequestCtrl
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_REGUREQUESTCTRL1,	0x03, 0x03, 0xff),
 | 
						|
	/*
 | 
						|
	 * 0x03, Vsmps3RequestCtrl
 | 
						|
	 * 0x0c, VpllRequestCtrl
 | 
						|
	 * 0x30, VanaRequestCtrl
 | 
						|
	 * 0xc0, VextSupply1RequestCtrl
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_REGUREQUESTCTRL2,	0x03, 0x04, 0xff),
 | 
						|
	/*
 | 
						|
	 * 0x03, VextSupply2RequestCtrl
 | 
						|
	 * 0x0c, VextSupply3RequestCtrl
 | 
						|
	 * 0x30, Vaux1RequestCtrl
 | 
						|
	 * 0xc0, Vaux2RequestCtrl
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_REGUREQUESTCTRL3,	0x03, 0x05, 0xff),
 | 
						|
	/*
 | 
						|
	 * 0x03, Vaux3RequestCtrl
 | 
						|
	 * 0x04, SwHPReq
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_REGUREQUESTCTRL4,	0x03, 0x06, 0x07),
 | 
						|
	/*
 | 
						|
	 * 0x01, Vsmps1SysClkReq1HPValid
 | 
						|
	 * 0x02, Vsmps2SysClkReq1HPValid
 | 
						|
	 * 0x04, Vsmps3SysClkReq1HPValid
 | 
						|
	 * 0x08, VanaSysClkReq1HPValid
 | 
						|
	 * 0x10, VpllSysClkReq1HPValid
 | 
						|
	 * 0x20, Vaux1SysClkReq1HPValid
 | 
						|
	 * 0x40, Vaux2SysClkReq1HPValid
 | 
						|
	 * 0x80, Vaux3SysClkReq1HPValid
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_REGUSYSCLKREQ1HPVALID1,	0x03, 0x07, 0xff),
 | 
						|
	/*
 | 
						|
	 * 0x01, VapeSysClkReq1HPValid
 | 
						|
	 * 0x02, VarmSysClkReq1HPValid
 | 
						|
	 * 0x04, VbbSysClkReq1HPValid
 | 
						|
	 * 0x10, VextSupply1SysClkReq1HPValid
 | 
						|
	 * 0x20, VextSupply2SysClkReq1HPValid
 | 
						|
	 * 0x40, VextSupply3SysClkReq1HPValid
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_REGUSYSCLKREQ1HPVALID2,	0x03, 0x08, 0x77),
 | 
						|
	/*
 | 
						|
	 * 0x01, Vsmps1HwHPReq1Valid
 | 
						|
	 * 0x02, Vsmps2HwHPReq1Valid
 | 
						|
	 * 0x04, Vsmps3HwHPReq1Valid
 | 
						|
	 * 0x08, VanaHwHPReq1Valid
 | 
						|
	 * 0x10, VpllHwHPReq1Valid
 | 
						|
	 * 0x20, Vaux1HwHPReq1Valid
 | 
						|
	 * 0x40, Vaux2HwHPReq1Valid
 | 
						|
	 * 0x80, Vaux3HwHPReq1Valid
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_REGUHWHPREQ1VALID1,	0x03, 0x09, 0xff),
 | 
						|
	/*
 | 
						|
	 * 0x01, VextSupply1HwHPReq1Valid
 | 
						|
	 * 0x02, VextSupply2HwHPReq1Valid
 | 
						|
	 * 0x04, VextSupply3HwHPReq1Valid
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_REGUHWHPREQ1VALID2,	0x03, 0x0a, 0x07),
 | 
						|
	/*
 | 
						|
	 * 0x01, Vsmps1HwHPReq2Valid
 | 
						|
	 * 0x02, Vsmps2HwHPReq2Valid
 | 
						|
	 * 0x03, Vsmps3HwHPReq2Valid
 | 
						|
	 * 0x08, VanaHwHPReq2Valid
 | 
						|
	 * 0x10, VpllHwHPReq2Valid
 | 
						|
	 * 0x20, Vaux1HwHPReq2Valid
 | 
						|
	 * 0x40, Vaux2HwHPReq2Valid
 | 
						|
	 * 0x80, Vaux3HwHPReq2Valid
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_REGUHWHPREQ2VALID1,	0x03, 0x0b, 0xff),
 | 
						|
	/*
 | 
						|
	 * 0x01, VextSupply1HwHPReq2Valid
 | 
						|
	 * 0x02, VextSupply2HwHPReq2Valid
 | 
						|
	 * 0x04, VextSupply3HwHPReq2Valid
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_REGUHWHPREQ2VALID2,	0x03, 0x0c, 0x07),
 | 
						|
	/*
 | 
						|
	 * 0x01, VapeSwHPReqValid
 | 
						|
	 * 0x02, VarmSwHPReqValid
 | 
						|
	 * 0x04, Vsmps1SwHPReqValid
 | 
						|
	 * 0x08, Vsmps2SwHPReqValid
 | 
						|
	 * 0x10, Vsmps3SwHPReqValid
 | 
						|
	 * 0x20, VanaSwHPReqValid
 | 
						|
	 * 0x40, VpllSwHPReqValid
 | 
						|
	 * 0x80, Vaux1SwHPReqValid
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_REGUSWHPREQVALID1,	0x03, 0x0d, 0xff),
 | 
						|
	/*
 | 
						|
	 * 0x01, Vaux2SwHPReqValid
 | 
						|
	 * 0x02, Vaux3SwHPReqValid
 | 
						|
	 * 0x04, VextSupply1SwHPReqValid
 | 
						|
	 * 0x08, VextSupply2SwHPReqValid
 | 
						|
	 * 0x10, VextSupply3SwHPReqValid
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_REGUSWHPREQVALID2,	0x03, 0x0e, 0x1f),
 | 
						|
	/*
 | 
						|
	 * 0x02, SysClkReq2Valid1
 | 
						|
	 * ...
 | 
						|
	 * 0x80, SysClkReq8Valid1
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_REGUSYSCLKREQVALID1,	0x03, 0x0f, 0xff),
 | 
						|
	/*
 | 
						|
	 * 0x02, SysClkReq2Valid2
 | 
						|
	 * ...
 | 
						|
	 * 0x80, SysClkReq8Valid2
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_REGUSYSCLKREQVALID2,	0x03, 0x10, 0xff),
 | 
						|
	/*
 | 
						|
	 * 0x01, Vaux4SwHPReqValid
 | 
						|
	 * 0x02, Vaux4HwHPReq2Valid
 | 
						|
	 * 0x04, Vaux4HwHPReq1Valid
 | 
						|
	 * 0x08, Vaux4SysClkReq1HPValid
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_REGUVAUX4REQVALID,	0x03, 0x11, 0x0f),
 | 
						|
	/*
 | 
						|
	 * 0x01, Vaux5SwHPReqValid
 | 
						|
	 * 0x02, Vaux5HwHPReq2Valid
 | 
						|
	 * 0x04, Vaux5HwHPReq1Valid
 | 
						|
	 * 0x08, Vaux5SysClkReq1HPValid
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_REGUVAUX5REQVALID,	0x03, 0x12, 0x0f),
 | 
						|
	/*
 | 
						|
	 * 0x01, Vaux6SwHPReqValid
 | 
						|
	 * 0x02, Vaux6HwHPReq2Valid
 | 
						|
	 * 0x04, Vaux6HwHPReq1Valid
 | 
						|
	 * 0x08, Vaux6SysClkReq1HPValid
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_REGUVAUX6REQVALID,	0x03, 0x13, 0x0f),
 | 
						|
	/*
 | 
						|
	 * 0x01, VclkbSwHPReqValid
 | 
						|
	 * 0x02, VclkbHwHPReq2Valid
 | 
						|
	 * 0x04, VclkbHwHPReq1Valid
 | 
						|
	 * 0x08, VclkbSysClkReq1HPValid
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_REGUVCLKBREQVALID,	0x03, 0x14, 0x0f),
 | 
						|
	/*
 | 
						|
	 * 0x01, Vrf1SwHPReqValid
 | 
						|
	 * 0x02, Vrf1HwHPReq2Valid
 | 
						|
	 * 0x04, Vrf1HwHPReq1Valid
 | 
						|
	 * 0x08, Vrf1SysClkReq1HPValid
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_REGUVRF1REQVALID,	0x03, 0x15, 0x0f),
 | 
						|
	/*
 | 
						|
	 * 0x02, VTVoutEna
 | 
						|
	 * 0x04, Vintcore12Ena
 | 
						|
	 * 0x38, Vintcore12Sel
 | 
						|
	 * 0x40, Vintcore12LP
 | 
						|
	 * 0x80, VTVoutLP
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_REGUMISC1,		0x03, 0x80, 0xfe),
 | 
						|
	/*
 | 
						|
	 * 0x02, VaudioEna
 | 
						|
	 * 0x04, VdmicEna
 | 
						|
	 * 0x08, Vamic1Ena
 | 
						|
	 * 0x10, Vamic2Ena
 | 
						|
	 * 0x20, Vamic12LP
 | 
						|
	 * 0xC0, VdmicSel
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_VAUDIOSUPPLY,		0x03, 0x83, 0xfe),
 | 
						|
	/*
 | 
						|
	 * 0x01, Vamic1_dzout
 | 
						|
	 * 0x02, Vamic2_dzout
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_REGUCTRL1VAMIC,		0x03, 0x84, 0x03),
 | 
						|
	/*
 | 
						|
	 * 0x07, VHSICSel
 | 
						|
	 * 0x08, VHSICOffState
 | 
						|
	 * 0x10, VHSIEna
 | 
						|
	 * 0x20, VHSICLP
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_VHSIC,			0x03, 0x87, 0x3f),
 | 
						|
	/*
 | 
						|
	 * 0x07, VSDIOSel
 | 
						|
	 * 0x08, VSDIOOffState
 | 
						|
	 * 0x10, VSDIOEna
 | 
						|
	 * 0x20, VSDIOLP
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_VSDIO,			0x03, 0x88, 0x3f),
 | 
						|
	/*
 | 
						|
	 * 0x03, Vsmps1Regu
 | 
						|
	 * 0x0c, Vsmps1SelCtrl
 | 
						|
	 * 0x10, Vsmps1AutoMode
 | 
						|
	 * 0x20, Vsmps1PWMMode
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_VSMPS1REGU,		0x04, 0x03, 0x3f),
 | 
						|
	/*
 | 
						|
	 * 0x03, Vsmps2Regu
 | 
						|
	 * 0x0c, Vsmps2SelCtrl
 | 
						|
	 * 0x10, Vsmps2AutoMode
 | 
						|
	 * 0x20, Vsmps2PWMMode
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_VSMPS2REGU,		0x04, 0x04, 0x3f),
 | 
						|
	/*
 | 
						|
	 * 0x03, Vsmps3Regu
 | 
						|
	 * 0x0c, Vsmps3SelCtrl
 | 
						|
	 * 0x10, Vsmps3AutoMode
 | 
						|
	 * 0x20, Vsmps3PWMMode
 | 
						|
	 * NOTE! PRCMU register
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_VSMPS3REGU,		0x04, 0x05, 0x0f),
 | 
						|
	/*
 | 
						|
	 * 0x03, VpllRegu
 | 
						|
	 * 0x0c, VanaRegu
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_VPLLVANAREGU,		0x04, 0x06, 0x0f),
 | 
						|
	/*
 | 
						|
	 * 0x03, VextSupply1Regu
 | 
						|
	 * 0x0c, VextSupply2Regu
 | 
						|
	 * 0x30, VextSupply3Regu
 | 
						|
	 * 0x40, ExtSupply2Bypass
 | 
						|
	 * 0x80, ExtSupply3Bypass
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_EXTSUPPLYREGU,		0x04, 0x08, 0xff),
 | 
						|
	/*
 | 
						|
	 * 0x03, Vaux1Regu
 | 
						|
	 * 0x0c, Vaux2Regu
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_VAUX12REGU,		0x04, 0x09, 0x0f),
 | 
						|
	/*
 | 
						|
	 * 0x0c, VRF1Regu
 | 
						|
	 * 0x03, Vaux3Regu
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_VRF1VAUX3REGU,		0x04, 0x0a, 0x0f),
 | 
						|
	/*
 | 
						|
	 * 0x3f, Vsmps1Sel1
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_VSMPS1SEL1,		0x04, 0x13, 0x3f),
 | 
						|
	/*
 | 
						|
	 * 0x3f, Vsmps1Sel2
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_VSMPS1SEL2,		0x04, 0x14, 0x3f),
 | 
						|
	/*
 | 
						|
	 * 0x3f, Vsmps1Sel3
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_VSMPS1SEL3,		0x04, 0x15, 0x3f),
 | 
						|
	/*
 | 
						|
	 * 0x3f, Vsmps2Sel1
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_VSMPS2SEL1,		0x04, 0x17, 0x3f),
 | 
						|
	/*
 | 
						|
	 * 0x3f, Vsmps2Sel2
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_VSMPS2SEL2,		0x04, 0x18, 0x3f),
 | 
						|
	/*
 | 
						|
	 * 0x3f, Vsmps2Sel3
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_VSMPS2SEL3,		0x04, 0x19, 0x3f),
 | 
						|
	/*
 | 
						|
	 * 0x7f, Vsmps3Sel1
 | 
						|
	 * NOTE! PRCMU register
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_VSMPS3SEL1,             0x04, 0x1b, 0x7f),
 | 
						|
	/*
 | 
						|
	 * 0x7f, Vsmps3Sel2
 | 
						|
	 * NOTE! PRCMU register
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_VSMPS3SEL2,             0x04, 0x1c, 0x7f),
 | 
						|
	/*
 | 
						|
	 * 0x0f, Vaux1Sel
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_VAUX1SEL,		0x04, 0x1f, 0x0f),
 | 
						|
	/*
 | 
						|
	 * 0x0f, Vaux2Sel
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_VAUX2SEL,		0x04, 0x20, 0x0f),
 | 
						|
	/*
 | 
						|
	 * 0x07, Vaux3Sel
 | 
						|
	 * 0x70, Vrf1Sel
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_VRF1VAUX3SEL,		0x04, 0x21, 0x77),
 | 
						|
	/*
 | 
						|
	 * 0x01, VextSupply12LP
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_REGUCTRL2SPARE,		0x04, 0x22, 0x01),
 | 
						|
	/*
 | 
						|
	 * 0x07, Vanasel
 | 
						|
	 * 0x30, Vpllsel
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_VANAVPLLSEL,		0x04, 0x29, 0x37),
 | 
						|
	/*
 | 
						|
	 * 0x03, Vaux4RequestCtrl
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_VAUX4REQCTRL,		0x04, 0x2d, 0x03),
 | 
						|
	/*
 | 
						|
	 * 0x03, Vaux4Regu
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_VAUX4REGU,		0x04, 0x2e, 0x03),
 | 
						|
	/*
 | 
						|
	 * 0x0f, Vaux4Sel
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_VAUX4SEL,		0x04, 0x2f, 0x0f),
 | 
						|
	/*
 | 
						|
	 * 0x03, Vaux5RequestCtrl
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_VAUX5REQCTRL,		0x04, 0x31, 0x03),
 | 
						|
	/*
 | 
						|
	 * 0x03, Vaux5Regu
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_VAUX5REGU,		0x04, 0x32, 0x03),
 | 
						|
	/*
 | 
						|
	 * 0x3f, Vaux5Sel
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_VAUX5SEL,		0x04, 0x33, 0x3f),
 | 
						|
	/*
 | 
						|
	 * 0x03, Vaux6RequestCtrl
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_VAUX6REQCTRL,		0x04, 0x34, 0x03),
 | 
						|
	/*
 | 
						|
	 * 0x03, Vaux6Regu
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_VAUX6REGU,		0x04, 0x35, 0x03),
 | 
						|
	/*
 | 
						|
	 * 0x3f, Vaux6Sel
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_VAUX6SEL,		0x04, 0x36, 0x3f),
 | 
						|
	/*
 | 
						|
	 * 0x03, VCLKBRequestCtrl
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_VCLKBREQCTRL,		0x04, 0x37, 0x03),
 | 
						|
	/*
 | 
						|
	 * 0x03, VCLKBRegu
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_VCLKBREGU,		0x04, 0x38, 0x03),
 | 
						|
	/*
 | 
						|
	 * 0x07, VCLKBSel
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_VCLKBSEL,		0x04, 0x39, 0x07),
 | 
						|
	/*
 | 
						|
	 * 0x03, Vrf1RequestCtrl
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_VRF1REQCTRL,		0x04, 0x3a, 0x03),
 | 
						|
	/*
 | 
						|
	 * 0x01, VpllDisch
 | 
						|
	 * 0x02, Vrf1Disch
 | 
						|
	 * 0x04, Vaux1Disch
 | 
						|
	 * 0x08, Vaux2Disch
 | 
						|
	 * 0x10, Vaux3Disch
 | 
						|
	 * 0x20, Vintcore12Disch
 | 
						|
	 * 0x40, VTVoutDisch
 | 
						|
	 * 0x80, VaudioDisch
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_REGUCTRLDISCH,		0x04, 0x43, 0xff),
 | 
						|
	/*
 | 
						|
	 * 0x02, VanaDisch
 | 
						|
	 * 0x04, VdmicPullDownEna
 | 
						|
	 * 0x08, VpllPullDownEna
 | 
						|
	 * 0x10, VdmicDisch
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_REGUCTRLDISCH2,		0x04, 0x44, 0x1e),
 | 
						|
	/*
 | 
						|
	 * 0x01, Vaux4Disch
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_REGUCTRLDISCH3,		0x04, 0x48, 0x01),
 | 
						|
	/*
 | 
						|
	 * 0x01, Vaux5Disch
 | 
						|
	 * 0x02, Vaux6Disch
 | 
						|
	 * 0x04, VCLKBDisch
 | 
						|
	 */
 | 
						|
	REG_INIT(AB8540_REGUCTRLDISCH4,		0x04, 0x49, 0x07),
 | 
						|
};
 | 
						|
 | 
						|
static struct of_regulator_match ab8500_regulator_match[] = {
 | 
						|
	{ .name	= "ab8500_ldo_aux1",    .driver_data = (void *) AB8500_LDO_AUX1, },
 | 
						|
	{ .name	= "ab8500_ldo_aux2",    .driver_data = (void *) AB8500_LDO_AUX2, },
 | 
						|
	{ .name	= "ab8500_ldo_aux3",    .driver_data = (void *) AB8500_LDO_AUX3, },
 | 
						|
	{ .name	= "ab8500_ldo_intcore", .driver_data = (void *) AB8500_LDO_INTCORE, },
 | 
						|
	{ .name	= "ab8500_ldo_tvout",   .driver_data = (void *) AB8500_LDO_TVOUT, },
 | 
						|
	{ .name = "ab8500_ldo_audio",   .driver_data = (void *) AB8500_LDO_AUDIO, },
 | 
						|
	{ .name	= "ab8500_ldo_anamic1", .driver_data = (void *) AB8500_LDO_ANAMIC1, },
 | 
						|
	{ .name	= "ab8500_ldo_amamic2", .driver_data = (void *) AB8500_LDO_ANAMIC2, },
 | 
						|
	{ .name	= "ab8500_ldo_dmic",    .driver_data = (void *) AB8500_LDO_DMIC, },
 | 
						|
	{ .name	= "ab8500_ldo_ana",     .driver_data = (void *) AB8500_LDO_ANA, },
 | 
						|
};
 | 
						|
 | 
						|
static struct of_regulator_match ab8505_regulator_match[] = {
 | 
						|
	{ .name	= "ab8500_ldo_aux1",    .driver_data = (void *) AB8505_LDO_AUX1, },
 | 
						|
	{ .name	= "ab8500_ldo_aux2",    .driver_data = (void *) AB8505_LDO_AUX2, },
 | 
						|
	{ .name	= "ab8500_ldo_aux3",    .driver_data = (void *) AB8505_LDO_AUX3, },
 | 
						|
	{ .name	= "ab8500_ldo_aux4",    .driver_data = (void *) AB8505_LDO_AUX4, },
 | 
						|
	{ .name	= "ab8500_ldo_aux5",    .driver_data = (void *) AB8505_LDO_AUX5, },
 | 
						|
	{ .name	= "ab8500_ldo_aux6",    .driver_data = (void *) AB8505_LDO_AUX6, },
 | 
						|
	{ .name	= "ab8500_ldo_intcore", .driver_data = (void *) AB8505_LDO_INTCORE, },
 | 
						|
	{ .name	= "ab8500_ldo_adc",	.driver_data = (void *) AB8505_LDO_ADC, },
 | 
						|
	{ .name = "ab8500_ldo_audio",   .driver_data = (void *) AB8505_LDO_AUDIO, },
 | 
						|
	{ .name	= "ab8500_ldo_anamic1", .driver_data = (void *) AB8505_LDO_ANAMIC1, },
 | 
						|
	{ .name	= "ab8500_ldo_amamic2", .driver_data = (void *) AB8505_LDO_ANAMIC2, },
 | 
						|
	{ .name	= "ab8500_ldo_aux8",    .driver_data = (void *) AB8505_LDO_AUX8, },
 | 
						|
	{ .name	= "ab8500_ldo_ana",     .driver_data = (void *) AB8505_LDO_ANA, },
 | 
						|
};
 | 
						|
 | 
						|
static struct of_regulator_match ab8540_regulator_match[] = {
 | 
						|
	{ .name	= "ab8500_ldo_aux1",    .driver_data = (void *) AB8540_LDO_AUX1, },
 | 
						|
	{ .name	= "ab8500_ldo_aux2",    .driver_data = (void *) AB8540_LDO_AUX2, },
 | 
						|
	{ .name	= "ab8500_ldo_aux3",    .driver_data = (void *) AB8540_LDO_AUX3, },
 | 
						|
	{ .name	= "ab8500_ldo_aux4",    .driver_data = (void *) AB8540_LDO_AUX4, },
 | 
						|
	{ .name	= "ab8500_ldo_aux5",    .driver_data = (void *) AB8540_LDO_AUX5, },
 | 
						|
	{ .name	= "ab8500_ldo_aux6",    .driver_data = (void *) AB8540_LDO_AUX6, },
 | 
						|
	{ .name	= "ab8500_ldo_intcore", .driver_data = (void *) AB8540_LDO_INTCORE, },
 | 
						|
	{ .name	= "ab8500_ldo_tvout",   .driver_data = (void *) AB8540_LDO_TVOUT, },
 | 
						|
	{ .name = "ab8500_ldo_audio",   .driver_data = (void *) AB8540_LDO_AUDIO, },
 | 
						|
	{ .name	= "ab8500_ldo_anamic1", .driver_data = (void *) AB8540_LDO_ANAMIC1, },
 | 
						|
	{ .name	= "ab8500_ldo_amamic2", .driver_data = (void *) AB8540_LDO_ANAMIC2, },
 | 
						|
	{ .name	= "ab8500_ldo_dmic",    .driver_data = (void *) AB8540_LDO_DMIC, },
 | 
						|
	{ .name	= "ab8500_ldo_ana",     .driver_data = (void *) AB8540_LDO_ANA, },
 | 
						|
	{ .name = "ab8500_ldo_sdio",    .driver_data = (void *) AB8540_LDO_SDIO, },
 | 
						|
};
 | 
						|
 | 
						|
static struct of_regulator_match ab9540_regulator_match[] = {
 | 
						|
	{ .name	= "ab8500_ldo_aux1",    .driver_data = (void *) AB9540_LDO_AUX1, },
 | 
						|
	{ .name	= "ab8500_ldo_aux2",    .driver_data = (void *) AB9540_LDO_AUX2, },
 | 
						|
	{ .name	= "ab8500_ldo_aux3",    .driver_data = (void *) AB9540_LDO_AUX3, },
 | 
						|
	{ .name	= "ab8500_ldo_aux4",    .driver_data = (void *) AB9540_LDO_AUX4, },
 | 
						|
	{ .name	= "ab8500_ldo_intcore", .driver_data = (void *) AB9540_LDO_INTCORE, },
 | 
						|
	{ .name	= "ab8500_ldo_tvout",   .driver_data = (void *) AB9540_LDO_TVOUT, },
 | 
						|
	{ .name = "ab8500_ldo_audio",   .driver_data = (void *) AB9540_LDO_AUDIO, },
 | 
						|
	{ .name	= "ab8500_ldo_anamic1", .driver_data = (void *) AB9540_LDO_ANAMIC1, },
 | 
						|
	{ .name	= "ab8500_ldo_amamic2", .driver_data = (void *) AB9540_LDO_ANAMIC2, },
 | 
						|
	{ .name	= "ab8500_ldo_dmic",    .driver_data = (void *) AB9540_LDO_DMIC, },
 | 
						|
	{ .name	= "ab8500_ldo_ana",     .driver_data = (void *) AB9540_LDO_ANA, },
 | 
						|
};
 | 
						|
 | 
						|
static struct {
 | 
						|
	struct ab8500_regulator_info *info;
 | 
						|
	int info_size;
 | 
						|
	struct ab8500_reg_init *init;
 | 
						|
	int init_size;
 | 
						|
	struct of_regulator_match *match;
 | 
						|
	int match_size;
 | 
						|
} abx500_regulator;
 | 
						|
 | 
						|
static void abx500_get_regulator_info(struct ab8500 *ab8500)
 | 
						|
{
 | 
						|
	if (is_ab9540(ab8500)) {
 | 
						|
		abx500_regulator.info = ab9540_regulator_info;
 | 
						|
		abx500_regulator.info_size = ARRAY_SIZE(ab9540_regulator_info);
 | 
						|
		abx500_regulator.init = ab9540_reg_init;
 | 
						|
		abx500_regulator.init_size = AB9540_NUM_REGULATOR_REGISTERS;
 | 
						|
		abx500_regulator.match = ab9540_regulator_match;
 | 
						|
		abx500_regulator.match_size = ARRAY_SIZE(ab9540_regulator_match);
 | 
						|
	} else if (is_ab8505(ab8500)) {
 | 
						|
		abx500_regulator.info = ab8505_regulator_info;
 | 
						|
		abx500_regulator.info_size = ARRAY_SIZE(ab8505_regulator_info);
 | 
						|
		abx500_regulator.init = ab8505_reg_init;
 | 
						|
		abx500_regulator.init_size = AB8505_NUM_REGULATOR_REGISTERS;
 | 
						|
		abx500_regulator.match = ab8505_regulator_match;
 | 
						|
		abx500_regulator.match_size = ARRAY_SIZE(ab8505_regulator_match);
 | 
						|
	} else if (is_ab8540(ab8500)) {
 | 
						|
		abx500_regulator.info = ab8540_regulator_info;
 | 
						|
		abx500_regulator.info_size = ARRAY_SIZE(ab8540_regulator_info);
 | 
						|
		abx500_regulator.init = ab8540_reg_init;
 | 
						|
		abx500_regulator.init_size = AB8540_NUM_REGULATOR_REGISTERS;
 | 
						|
		abx500_regulator.match = ab8540_regulator_match;
 | 
						|
		abx500_regulator.match_size = ARRAY_SIZE(ab8540_regulator_match);
 | 
						|
	} else {
 | 
						|
		abx500_regulator.info = ab8500_regulator_info;
 | 
						|
		abx500_regulator.info_size = ARRAY_SIZE(ab8500_regulator_info);
 | 
						|
		abx500_regulator.init = ab8500_reg_init;
 | 
						|
		abx500_regulator.init_size = AB8500_NUM_REGULATOR_REGISTERS;
 | 
						|
		abx500_regulator.match = ab8500_regulator_match;
 | 
						|
		abx500_regulator.match_size = ARRAY_SIZE(ab8500_regulator_match);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static int ab8500_regulator_init_registers(struct platform_device *pdev,
 | 
						|
					   int id, int mask, int value)
 | 
						|
{
 | 
						|
	struct ab8500_reg_init *reg_init = abx500_regulator.init;
 | 
						|
	int err;
 | 
						|
 | 
						|
	BUG_ON(value & ~mask);
 | 
						|
	BUG_ON(mask & ~reg_init[id].mask);
 | 
						|
 | 
						|
	/* initialize register */
 | 
						|
	err = abx500_mask_and_set_register_interruptible(
 | 
						|
		&pdev->dev,
 | 
						|
		reg_init[id].bank,
 | 
						|
		reg_init[id].addr,
 | 
						|
		mask, value);
 | 
						|
	if (err < 0) {
 | 
						|
		dev_err(&pdev->dev,
 | 
						|
			"Failed to initialize 0x%02x, 0x%02x.\n",
 | 
						|
			reg_init[id].bank,
 | 
						|
			reg_init[id].addr);
 | 
						|
		return err;
 | 
						|
	}
 | 
						|
	dev_vdbg(&pdev->dev,
 | 
						|
		 "  init: 0x%02x, 0x%02x, 0x%02x, 0x%02x\n",
 | 
						|
		 reg_init[id].bank,
 | 
						|
		 reg_init[id].addr,
 | 
						|
		 mask, value);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int ab8500_regulator_register(struct platform_device *pdev,
 | 
						|
				     struct regulator_init_data *init_data,
 | 
						|
				     int id, struct device_node *np)
 | 
						|
{
 | 
						|
	struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
 | 
						|
	struct ab8500_regulator_info *info = NULL;
 | 
						|
	struct regulator_config config = { };
 | 
						|
	int err;
 | 
						|
 | 
						|
	/* assign per-regulator data */
 | 
						|
	info = &abx500_regulator.info[id];
 | 
						|
	info->dev = &pdev->dev;
 | 
						|
 | 
						|
	config.dev = &pdev->dev;
 | 
						|
	config.init_data = init_data;
 | 
						|
	config.driver_data = info;
 | 
						|
	config.of_node = np;
 | 
						|
 | 
						|
	/* fix for hardware before ab8500v2.0 */
 | 
						|
	if (is_ab8500_1p1_or_earlier(ab8500)) {
 | 
						|
		if (info->desc.id == AB8500_LDO_AUX3) {
 | 
						|
			info->desc.n_voltages =
 | 
						|
				ARRAY_SIZE(ldo_vauxn_voltages);
 | 
						|
			info->desc.volt_table = ldo_vauxn_voltages;
 | 
						|
			info->voltage_mask = 0xf;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	/* register regulator with framework */
 | 
						|
	info->regulator = regulator_register(&info->desc, &config);
 | 
						|
	if (IS_ERR(info->regulator)) {
 | 
						|
		err = PTR_ERR(info->regulator);
 | 
						|
		dev_err(&pdev->dev, "failed to register regulator %s\n",
 | 
						|
			info->desc.name);
 | 
						|
		/* when we fail, un-register all earlier regulators */
 | 
						|
		while (--id >= 0) {
 | 
						|
			info = &abx500_regulator.info[id];
 | 
						|
			regulator_unregister(info->regulator);
 | 
						|
		}
 | 
						|
		return err;
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int
 | 
						|
ab8500_regulator_of_probe(struct platform_device *pdev,
 | 
						|
			  struct device_node *np)
 | 
						|
{
 | 
						|
	struct of_regulator_match *match = abx500_regulator.match;
 | 
						|
	int err, i;
 | 
						|
 | 
						|
	for (i = 0; i < abx500_regulator.info_size; i++) {
 | 
						|
		err = ab8500_regulator_register(
 | 
						|
			pdev, match[i].init_data, i, match[i].of_node);
 | 
						|
		if (err)
 | 
						|
			return err;
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int ab8500_regulator_probe(struct platform_device *pdev)
 | 
						|
{
 | 
						|
	struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
 | 
						|
	struct device_node *np = pdev->dev.of_node;
 | 
						|
	struct ab8500_platform_data *ppdata;
 | 
						|
	struct ab8500_regulator_platform_data *pdata;
 | 
						|
	int i, err;
 | 
						|
 | 
						|
	if (!ab8500) {
 | 
						|
		dev_err(&pdev->dev, "null mfd parent\n");
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	abx500_get_regulator_info(ab8500);
 | 
						|
 | 
						|
	if (np) {
 | 
						|
		err = of_regulator_match(&pdev->dev, np,
 | 
						|
					 abx500_regulator.match,
 | 
						|
					 abx500_regulator.match_size);
 | 
						|
		if (err < 0) {
 | 
						|
			dev_err(&pdev->dev,
 | 
						|
				"Error parsing regulator init data: %d\n", err);
 | 
						|
			return err;
 | 
						|
		}
 | 
						|
 | 
						|
		err = ab8500_regulator_of_probe(pdev, np);
 | 
						|
		return err;
 | 
						|
	}
 | 
						|
 | 
						|
	ppdata = dev_get_platdata(ab8500->dev);
 | 
						|
	if (!ppdata) {
 | 
						|
		dev_err(&pdev->dev, "null parent pdata\n");
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	pdata = ppdata->regulator;
 | 
						|
	if (!pdata) {
 | 
						|
		dev_err(&pdev->dev, "null pdata\n");
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	/* make sure the platform data has the correct size */
 | 
						|
	if (pdata->num_regulator != abx500_regulator.info_size) {
 | 
						|
		dev_err(&pdev->dev, "Configuration error: size mismatch.\n");
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	/* initialize debug (initial state is recorded with this call) */
 | 
						|
	err = ab8500_regulator_debug_init(pdev);
 | 
						|
	if (err)
 | 
						|
		return err;
 | 
						|
 | 
						|
	/* initialize registers */
 | 
						|
	for (i = 0; i < pdata->num_reg_init; i++) {
 | 
						|
		int id, mask, value;
 | 
						|
 | 
						|
		id = pdata->reg_init[i].id;
 | 
						|
		mask = pdata->reg_init[i].mask;
 | 
						|
		value = pdata->reg_init[i].value;
 | 
						|
 | 
						|
		/* check for configuration errors */
 | 
						|
		BUG_ON(id >= abx500_regulator.init_size);
 | 
						|
 | 
						|
		err = ab8500_regulator_init_registers(pdev, id, mask, value);
 | 
						|
		if (err < 0)
 | 
						|
			return err;
 | 
						|
	}
 | 
						|
 | 
						|
	if (!is_ab8505(ab8500)) {
 | 
						|
		/* register external regulators (before Vaux1, 2 and 3) */
 | 
						|
		err = ab8500_ext_regulator_init(pdev);
 | 
						|
		if (err)
 | 
						|
			return err;
 | 
						|
	}
 | 
						|
 | 
						|
	/* register all regulators */
 | 
						|
	for (i = 0; i < abx500_regulator.info_size; i++) {
 | 
						|
		err = ab8500_regulator_register(pdev, &pdata->regulator[i],
 | 
						|
						i, NULL);
 | 
						|
		if (err < 0) {
 | 
						|
			if (!is_ab8505(ab8500))
 | 
						|
				ab8500_ext_regulator_exit(pdev);
 | 
						|
			return err;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int ab8500_regulator_remove(struct platform_device *pdev)
 | 
						|
{
 | 
						|
	int i, err;
 | 
						|
	struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
 | 
						|
 | 
						|
	for (i = 0; i < abx500_regulator.info_size; i++) {
 | 
						|
		struct ab8500_regulator_info *info = NULL;
 | 
						|
		info = &abx500_regulator.info[i];
 | 
						|
 | 
						|
		dev_vdbg(rdev_get_dev(info->regulator),
 | 
						|
			"%s-remove\n", info->desc.name);
 | 
						|
 | 
						|
		regulator_unregister(info->regulator);
 | 
						|
	}
 | 
						|
 | 
						|
	/* remove external regulators (after Vaux1, 2 and 3) */
 | 
						|
	if (!is_ab8505(ab8500))
 | 
						|
		ab8500_ext_regulator_exit(pdev);
 | 
						|
 | 
						|
	/* remove regulator debug */
 | 
						|
	err = ab8500_regulator_debug_exit(pdev);
 | 
						|
	if (err)
 | 
						|
		return err;
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static struct platform_driver ab8500_regulator_driver = {
 | 
						|
	.probe = ab8500_regulator_probe,
 | 
						|
	.remove = ab8500_regulator_remove,
 | 
						|
	.driver         = {
 | 
						|
		.name   = "ab8500-regulator",
 | 
						|
		.owner  = THIS_MODULE,
 | 
						|
	},
 | 
						|
};
 | 
						|
 | 
						|
static int __init ab8500_regulator_init(void)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
 | 
						|
	ret = platform_driver_register(&ab8500_regulator_driver);
 | 
						|
	if (ret != 0)
 | 
						|
		pr_err("Failed to register ab8500 regulator: %d\n", ret);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
subsys_initcall(ab8500_regulator_init);
 | 
						|
 | 
						|
static void __exit ab8500_regulator_exit(void)
 | 
						|
{
 | 
						|
	platform_driver_unregister(&ab8500_regulator_driver);
 | 
						|
}
 | 
						|
module_exit(ab8500_regulator_exit);
 | 
						|
 | 
						|
MODULE_LICENSE("GPL v2");
 | 
						|
MODULE_AUTHOR("Sundar Iyer <sundar.iyer@stericsson.com>");
 | 
						|
MODULE_AUTHOR("Bengt Jonsson <bengt.g.jonsson@stericsson.com>");
 | 
						|
MODULE_AUTHOR("Daniel Willerud <daniel.willerud@stericsson.com>");
 | 
						|
MODULE_DESCRIPTION("Regulator Driver for ST-Ericsson AB8500 Mixed-Sig PMIC");
 | 
						|
MODULE_ALIAS("platform:ab8500-regulator");
 |