Use resource_size() instead of explicit calculation. This was found via make coccicheck. Signed-off-by: Silviu-Mihai Popescu <silviupopescu1990@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
		
			
				
	
	
		
			570 lines
		
	
	
	
		
			14 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			570 lines
		
	
	
	
		
			14 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
/*
 | 
						|
 *  Copyright 2007, Google Inc.
 | 
						|
 *  Copyright 2012, Intel Inc.
 | 
						|
 *
 | 
						|
 *  based on omap.c driver, which was
 | 
						|
 *  Copyright (C) 2004 Nokia Corporation
 | 
						|
 *  Written by Tuukka Tikkanen and Juha Yrjölä <juha.yrjola@nokia.com>
 | 
						|
 *  Misc hacks here and there by Tony Lindgren <tony@atomide.com>
 | 
						|
 *  Other hacks (DMA, SD, etc) by David Brownell
 | 
						|
 *
 | 
						|
 * This program is free software; you can redistribute it and/or modify
 | 
						|
 * it under the terms of the GNU General Public License version 2 as
 | 
						|
 * published by the Free Software Foundation.
 | 
						|
 */
 | 
						|
 | 
						|
#include <linux/module.h>
 | 
						|
#include <linux/platform_device.h>
 | 
						|
#include <linux/major.h>
 | 
						|
 | 
						|
#include <linux/types.h>
 | 
						|
#include <linux/pci.h>
 | 
						|
#include <linux/interrupt.h>
 | 
						|
 | 
						|
#include <linux/kernel.h>
 | 
						|
#include <linux/fs.h>
 | 
						|
#include <linux/errno.h>
 | 
						|
#include <linux/hdreg.h>
 | 
						|
#include <linux/kdev_t.h>
 | 
						|
#include <linux/blkdev.h>
 | 
						|
#include <linux/mutex.h>
 | 
						|
#include <linux/scatterlist.h>
 | 
						|
#include <linux/mmc/mmc.h>
 | 
						|
#include <linux/mmc/sdio.h>
 | 
						|
#include <linux/mmc/host.h>
 | 
						|
#include <linux/mmc/card.h>
 | 
						|
 | 
						|
#include <linux/moduleparam.h>
 | 
						|
#include <linux/init.h>
 | 
						|
#include <linux/ioport.h>
 | 
						|
#include <linux/dma-mapping.h>
 | 
						|
#include <linux/delay.h>
 | 
						|
#include <linux/spinlock.h>
 | 
						|
#include <linux/timer.h>
 | 
						|
#include <linux/clk.h>
 | 
						|
 | 
						|
#include <asm/io.h>
 | 
						|
#include <asm/irq.h>
 | 
						|
#include <asm/scatterlist.h>
 | 
						|
 | 
						|
#include <asm/types.h>
 | 
						|
#include <asm/io.h>
 | 
						|
#include <asm/uaccess.h>
 | 
						|
 | 
						|
#define DRIVER_NAME "goldfish_mmc"
 | 
						|
 | 
						|
#define BUFFER_SIZE   16384
 | 
						|
 | 
						|
#define GOLDFISH_MMC_READ(host, addr)   (readl(host->reg_base + addr))
 | 
						|
#define GOLDFISH_MMC_WRITE(host, addr, x)   (writel(x, host->reg_base + addr))
 | 
						|
 | 
						|
enum {
 | 
						|
	/* status register */
 | 
						|
	MMC_INT_STATUS	        = 0x00,
 | 
						|
	/* set this to enable IRQ */
 | 
						|
	MMC_INT_ENABLE	        = 0x04,
 | 
						|
	/* set this to specify buffer address */
 | 
						|
	MMC_SET_BUFFER          = 0x08,
 | 
						|
 | 
						|
	/* MMC command number */
 | 
						|
	MMC_CMD	                = 0x0C,
 | 
						|
 | 
						|
	/* MMC argument */
 | 
						|
	MMC_ARG	                = 0x10,
 | 
						|
 | 
						|
	/* MMC response (or R2 bits 0 - 31) */
 | 
						|
	MMC_RESP_0		        = 0x14,
 | 
						|
 | 
						|
	/* MMC R2 response bits 32 - 63 */
 | 
						|
	MMC_RESP_1		        = 0x18,
 | 
						|
 | 
						|
	/* MMC R2 response bits 64 - 95 */
 | 
						|
	MMC_RESP_2		        = 0x1C,
 | 
						|
 | 
						|
	/* MMC R2 response bits 96 - 127 */
 | 
						|
	MMC_RESP_3		        = 0x20,
 | 
						|
 | 
						|
	MMC_BLOCK_LENGTH        = 0x24,
 | 
						|
	MMC_BLOCK_COUNT         = 0x28,
 | 
						|
 | 
						|
	/* MMC state flags */
 | 
						|
	MMC_STATE               = 0x2C,
 | 
						|
 | 
						|
	/* MMC_INT_STATUS bits */
 | 
						|
 | 
						|
	MMC_STAT_END_OF_CMD     = 1U << 0,
 | 
						|
	MMC_STAT_END_OF_DATA    = 1U << 1,
 | 
						|
	MMC_STAT_STATE_CHANGE   = 1U << 2,
 | 
						|
	MMC_STAT_CMD_TIMEOUT    = 1U << 3,
 | 
						|
 | 
						|
	/* MMC_STATE bits */
 | 
						|
	MMC_STATE_INSERTED     = 1U << 0,
 | 
						|
	MMC_STATE_READ_ONLY    = 1U << 1,
 | 
						|
};
 | 
						|
 | 
						|
/*
 | 
						|
 * Command types
 | 
						|
 */
 | 
						|
#define OMAP_MMC_CMDTYPE_BC	0
 | 
						|
#define OMAP_MMC_CMDTYPE_BCR	1
 | 
						|
#define OMAP_MMC_CMDTYPE_AC	2
 | 
						|
#define OMAP_MMC_CMDTYPE_ADTC	3
 | 
						|
 | 
						|
 | 
						|
struct goldfish_mmc_host {
 | 
						|
	struct mmc_request	*mrq;
 | 
						|
	struct mmc_command	*cmd;
 | 
						|
	struct mmc_data		*data;
 | 
						|
	struct mmc_host		*mmc;
 | 
						|
	struct device		*dev;
 | 
						|
	unsigned char		id; /* 16xx chips have 2 MMC blocks */
 | 
						|
	void __iomem		*virt_base;
 | 
						|
	unsigned int		phys_base;
 | 
						|
	int			irq;
 | 
						|
	unsigned char		bus_mode;
 | 
						|
	unsigned char		hw_bus_mode;
 | 
						|
 | 
						|
	unsigned int		sg_len;
 | 
						|
	unsigned		dma_done:1;
 | 
						|
	unsigned		dma_in_use:1;
 | 
						|
 | 
						|
	void __iomem		*reg_base;
 | 
						|
};
 | 
						|
 | 
						|
static inline int
 | 
						|
goldfish_mmc_cover_is_open(struct goldfish_mmc_host *host)
 | 
						|
{
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static ssize_t
 | 
						|
goldfish_mmc_show_cover_switch(struct device *dev,
 | 
						|
			       struct device_attribute *attr, char *buf)
 | 
						|
{
 | 
						|
	struct goldfish_mmc_host *host = dev_get_drvdata(dev);
 | 
						|
 | 
						|
	return sprintf(buf, "%s\n", goldfish_mmc_cover_is_open(host) ? "open" :
 | 
						|
		       "closed");
 | 
						|
}
 | 
						|
 | 
						|
static DEVICE_ATTR(cover_switch, S_IRUGO, goldfish_mmc_show_cover_switch, NULL);
 | 
						|
 | 
						|
static void
 | 
						|
goldfish_mmc_start_command(struct goldfish_mmc_host *host, struct mmc_command *cmd)
 | 
						|
{
 | 
						|
	u32 cmdreg;
 | 
						|
	u32 resptype;
 | 
						|
	u32 cmdtype;
 | 
						|
 | 
						|
	host->cmd = cmd;
 | 
						|
 | 
						|
	resptype = 0;
 | 
						|
	cmdtype = 0;
 | 
						|
 | 
						|
	/* Our hardware needs to know exact type */
 | 
						|
	switch (mmc_resp_type(cmd)) {
 | 
						|
	case MMC_RSP_NONE:
 | 
						|
		break;
 | 
						|
	case MMC_RSP_R1:
 | 
						|
	case MMC_RSP_R1B:
 | 
						|
		/* resp 1, 1b, 6, 7 */
 | 
						|
		resptype = 1;
 | 
						|
		break;
 | 
						|
	case MMC_RSP_R2:
 | 
						|
		resptype = 2;
 | 
						|
		break;
 | 
						|
	case MMC_RSP_R3:
 | 
						|
		resptype = 3;
 | 
						|
		break;
 | 
						|
	default:
 | 
						|
		dev_err(mmc_dev(host->mmc),
 | 
						|
			"Invalid response type: %04x\n", mmc_resp_type(cmd));
 | 
						|
		break;
 | 
						|
	}
 | 
						|
 | 
						|
	if (mmc_cmd_type(cmd) == MMC_CMD_ADTC)
 | 
						|
		cmdtype = OMAP_MMC_CMDTYPE_ADTC;
 | 
						|
	else if (mmc_cmd_type(cmd) == MMC_CMD_BC)
 | 
						|
		cmdtype = OMAP_MMC_CMDTYPE_BC;
 | 
						|
	else if (mmc_cmd_type(cmd) == MMC_CMD_BCR)
 | 
						|
		cmdtype = OMAP_MMC_CMDTYPE_BCR;
 | 
						|
	else
 | 
						|
		cmdtype = OMAP_MMC_CMDTYPE_AC;
 | 
						|
 | 
						|
	cmdreg = cmd->opcode | (resptype << 8) | (cmdtype << 12);
 | 
						|
 | 
						|
	if (host->bus_mode == MMC_BUSMODE_OPENDRAIN)
 | 
						|
		cmdreg |= 1 << 6;
 | 
						|
 | 
						|
	if (cmd->flags & MMC_RSP_BUSY)
 | 
						|
		cmdreg |= 1 << 11;
 | 
						|
 | 
						|
	if (host->data && !(host->data->flags & MMC_DATA_WRITE))
 | 
						|
		cmdreg |= 1 << 15;
 | 
						|
 | 
						|
	GOLDFISH_MMC_WRITE(host, MMC_ARG, cmd->arg);
 | 
						|
	GOLDFISH_MMC_WRITE(host, MMC_CMD, cmdreg);
 | 
						|
}
 | 
						|
 | 
						|
static void goldfish_mmc_xfer_done(struct goldfish_mmc_host *host,
 | 
						|
				   struct mmc_data *data)
 | 
						|
{
 | 
						|
	if (host->dma_in_use) {
 | 
						|
		enum dma_data_direction dma_data_dir;
 | 
						|
 | 
						|
		if (data->flags & MMC_DATA_WRITE)
 | 
						|
			dma_data_dir = DMA_TO_DEVICE;
 | 
						|
		else
 | 
						|
			dma_data_dir = DMA_FROM_DEVICE;
 | 
						|
 | 
						|
		if (dma_data_dir == DMA_FROM_DEVICE) {
 | 
						|
			/*
 | 
						|
			 * We don't really have DMA, so we need
 | 
						|
			 * to copy from our platform driver buffer
 | 
						|
			 */
 | 
						|
			uint8_t *dest = (uint8_t *)sg_virt(data->sg);
 | 
						|
			memcpy(dest, host->virt_base, data->sg->length);
 | 
						|
		}
 | 
						|
		host->data->bytes_xfered += data->sg->length;
 | 
						|
		dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->sg_len,
 | 
						|
			     dma_data_dir);
 | 
						|
	}
 | 
						|
 | 
						|
	host->data = NULL;
 | 
						|
	host->sg_len = 0;
 | 
						|
 | 
						|
	/*
 | 
						|
	 * NOTE:  MMC layer will sometimes poll-wait CMD13 next, issuing
 | 
						|
	 * dozens of requests until the card finishes writing data.
 | 
						|
	 * It'd be cheaper to just wait till an EOFB interrupt arrives...
 | 
						|
	 */
 | 
						|
 | 
						|
	if (!data->stop) {
 | 
						|
		host->mrq = NULL;
 | 
						|
		mmc_request_done(host->mmc, data->mrq);
 | 
						|
		return;
 | 
						|
	}
 | 
						|
 | 
						|
	goldfish_mmc_start_command(host, data->stop);
 | 
						|
}
 | 
						|
 | 
						|
static void goldfish_mmc_end_of_data(struct goldfish_mmc_host *host,
 | 
						|
				     struct mmc_data *data)
 | 
						|
{
 | 
						|
	if (!host->dma_in_use) {
 | 
						|
		goldfish_mmc_xfer_done(host, data);
 | 
						|
		return;
 | 
						|
	}
 | 
						|
	if (host->dma_done)
 | 
						|
		goldfish_mmc_xfer_done(host, data);
 | 
						|
}
 | 
						|
 | 
						|
static void goldfish_mmc_cmd_done(struct goldfish_mmc_host *host,
 | 
						|
				  struct mmc_command *cmd)
 | 
						|
{
 | 
						|
	host->cmd = NULL;
 | 
						|
	if (cmd->flags & MMC_RSP_PRESENT) {
 | 
						|
		if (cmd->flags & MMC_RSP_136) {
 | 
						|
			/* response type 2 */
 | 
						|
			cmd->resp[3] =
 | 
						|
				GOLDFISH_MMC_READ(host, MMC_RESP_0);
 | 
						|
			cmd->resp[2] =
 | 
						|
				GOLDFISH_MMC_READ(host, MMC_RESP_1);
 | 
						|
			cmd->resp[1] =
 | 
						|
				GOLDFISH_MMC_READ(host, MMC_RESP_2);
 | 
						|
			cmd->resp[0] =
 | 
						|
				GOLDFISH_MMC_READ(host, MMC_RESP_3);
 | 
						|
		} else {
 | 
						|
			/* response types 1, 1b, 3, 4, 5, 6 */
 | 
						|
			cmd->resp[0] =
 | 
						|
				GOLDFISH_MMC_READ(host, MMC_RESP_0);
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	if (host->data == NULL || cmd->error) {
 | 
						|
		host->mrq = NULL;
 | 
						|
		mmc_request_done(host->mmc, cmd->mrq);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static irqreturn_t goldfish_mmc_irq(int irq, void *dev_id)
 | 
						|
{
 | 
						|
	struct goldfish_mmc_host *host = (struct goldfish_mmc_host *)dev_id;
 | 
						|
	u16 status;
 | 
						|
	int end_command = 0;
 | 
						|
	int end_transfer = 0;
 | 
						|
	int transfer_error = 0;
 | 
						|
	int state_changed = 0;
 | 
						|
	int cmd_timeout = 0;
 | 
						|
 | 
						|
	while ((status = GOLDFISH_MMC_READ(host, MMC_INT_STATUS)) != 0) {
 | 
						|
		GOLDFISH_MMC_WRITE(host, MMC_INT_STATUS, status);
 | 
						|
 | 
						|
		if (status & MMC_STAT_END_OF_CMD)
 | 
						|
			end_command = 1;
 | 
						|
 | 
						|
		if (status & MMC_STAT_END_OF_DATA)
 | 
						|
			end_transfer = 1;
 | 
						|
 | 
						|
		if (status & MMC_STAT_STATE_CHANGE)
 | 
						|
			state_changed = 1;
 | 
						|
 | 
						|
                if (status & MMC_STAT_CMD_TIMEOUT) {
 | 
						|
			end_command = 0;
 | 
						|
			cmd_timeout = 1;
 | 
						|
                }
 | 
						|
	}
 | 
						|
 | 
						|
	if (cmd_timeout) {
 | 
						|
		struct mmc_request *mrq = host->mrq;
 | 
						|
		mrq->cmd->error = -ETIMEDOUT;
 | 
						|
		host->mrq = NULL;
 | 
						|
		mmc_request_done(host->mmc, mrq);
 | 
						|
	}
 | 
						|
 | 
						|
	if (end_command)
 | 
						|
		goldfish_mmc_cmd_done(host, host->cmd);
 | 
						|
 | 
						|
	if (transfer_error)
 | 
						|
		goldfish_mmc_xfer_done(host, host->data);
 | 
						|
	else if (end_transfer) {
 | 
						|
		host->dma_done = 1;
 | 
						|
		goldfish_mmc_end_of_data(host, host->data);
 | 
						|
	} else if (host->data != NULL) {
 | 
						|
		/*
 | 
						|
		 * WORKAROUND -- after porting this driver from 2.6 to 3.4,
 | 
						|
		 * during device initialization, cases where host->data is
 | 
						|
		 * non-null but end_transfer is false would occur. Doing
 | 
						|
		 * nothing in such cases results in no further interrupts,
 | 
						|
		 * and initialization failure.
 | 
						|
		 * TODO -- find the real cause.
 | 
						|
		 */
 | 
						|
		host->dma_done = 1;
 | 
						|
		goldfish_mmc_end_of_data(host, host->data);
 | 
						|
	}
 | 
						|
 | 
						|
	if (state_changed) {
 | 
						|
		u32 state = GOLDFISH_MMC_READ(host, MMC_STATE);
 | 
						|
		pr_info("%s: Card detect now %d\n", __func__,
 | 
						|
			(state & MMC_STATE_INSERTED));
 | 
						|
		mmc_detect_change(host->mmc, 0);
 | 
						|
	}
 | 
						|
 | 
						|
	if (!end_command && !end_transfer &&
 | 
						|
	    !transfer_error && !state_changed && !cmd_timeout) {
 | 
						|
		status = GOLDFISH_MMC_READ(host, MMC_INT_STATUS);
 | 
						|
		dev_info(mmc_dev(host->mmc),"spurious irq 0x%04x\n", status);
 | 
						|
		if (status != 0) {
 | 
						|
			GOLDFISH_MMC_WRITE(host, MMC_INT_STATUS, status);
 | 
						|
			GOLDFISH_MMC_WRITE(host, MMC_INT_ENABLE, 0);
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	return IRQ_HANDLED;
 | 
						|
}
 | 
						|
 | 
						|
static void goldfish_mmc_prepare_data(struct goldfish_mmc_host *host,
 | 
						|
				      struct mmc_request *req)
 | 
						|
{
 | 
						|
	struct mmc_data *data = req->data;
 | 
						|
	int block_size;
 | 
						|
	unsigned sg_len;
 | 
						|
	enum dma_data_direction dma_data_dir;
 | 
						|
 | 
						|
	host->data = data;
 | 
						|
	if (data == NULL) {
 | 
						|
		GOLDFISH_MMC_WRITE(host, MMC_BLOCK_LENGTH, 0);
 | 
						|
		GOLDFISH_MMC_WRITE(host, MMC_BLOCK_COUNT, 0);
 | 
						|
		host->dma_in_use = 0;
 | 
						|
		return;
 | 
						|
	}
 | 
						|
 | 
						|
	block_size = data->blksz;
 | 
						|
 | 
						|
	GOLDFISH_MMC_WRITE(host, MMC_BLOCK_COUNT, data->blocks - 1);
 | 
						|
	GOLDFISH_MMC_WRITE(host, MMC_BLOCK_LENGTH, block_size - 1);
 | 
						|
 | 
						|
	/*
 | 
						|
	 * Cope with calling layer confusion; it issues "single
 | 
						|
	 * block" writes using multi-block scatterlists.
 | 
						|
	 */
 | 
						|
	sg_len = (data->blocks == 1) ? 1 : data->sg_len;
 | 
						|
 | 
						|
	if (data->flags & MMC_DATA_WRITE)
 | 
						|
		dma_data_dir = DMA_TO_DEVICE;
 | 
						|
	else
 | 
						|
		dma_data_dir = DMA_FROM_DEVICE;
 | 
						|
 | 
						|
	host->sg_len = dma_map_sg(mmc_dev(host->mmc), data->sg,
 | 
						|
				  sg_len, dma_data_dir);
 | 
						|
	host->dma_done = 0;
 | 
						|
	host->dma_in_use = 1;
 | 
						|
 | 
						|
	if (dma_data_dir == DMA_TO_DEVICE) {
 | 
						|
		/*
 | 
						|
		 * We don't really have DMA, so we need to copy to our
 | 
						|
		 * platform driver buffer
 | 
						|
		 */
 | 
						|
		const uint8_t *src = (uint8_t *)sg_virt(data->sg);
 | 
						|
		memcpy(host->virt_base, src, data->sg->length);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static void goldfish_mmc_request(struct mmc_host *mmc, struct mmc_request *req)
 | 
						|
{
 | 
						|
	struct goldfish_mmc_host *host = mmc_priv(mmc);
 | 
						|
 | 
						|
	WARN_ON(host->mrq != NULL);
 | 
						|
 | 
						|
	host->mrq = req;
 | 
						|
	goldfish_mmc_prepare_data(host, req);
 | 
						|
	goldfish_mmc_start_command(host, req->cmd);
 | 
						|
 | 
						|
	/*
 | 
						|
	 * This is to avoid accidentally being detected as an SDIO card
 | 
						|
	 * in mmc_attach_sdio().
 | 
						|
	 */
 | 
						|
	if (req->cmd->opcode == SD_IO_SEND_OP_COND &&
 | 
						|
	    req->cmd->flags == (MMC_RSP_SPI_R4 | MMC_RSP_R4 | MMC_CMD_BCR))
 | 
						|
		req->cmd->error = -EINVAL;
 | 
						|
}
 | 
						|
 | 
						|
static void goldfish_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 | 
						|
{
 | 
						|
	struct goldfish_mmc_host *host = mmc_priv(mmc);
 | 
						|
 | 
						|
	host->bus_mode = ios->bus_mode;
 | 
						|
	host->hw_bus_mode = host->bus_mode;
 | 
						|
}
 | 
						|
 | 
						|
static int goldfish_mmc_get_ro(struct mmc_host *mmc)
 | 
						|
{
 | 
						|
	uint32_t state;
 | 
						|
	struct goldfish_mmc_host *host = mmc_priv(mmc);
 | 
						|
 | 
						|
	state = GOLDFISH_MMC_READ(host, MMC_STATE);
 | 
						|
	return ((state & MMC_STATE_READ_ONLY) != 0);
 | 
						|
}
 | 
						|
 | 
						|
static const struct mmc_host_ops goldfish_mmc_ops = {
 | 
						|
	.request	= goldfish_mmc_request,
 | 
						|
	.set_ios	= goldfish_mmc_set_ios,
 | 
						|
	.get_ro		= goldfish_mmc_get_ro,
 | 
						|
};
 | 
						|
 | 
						|
static int goldfish_mmc_probe(struct platform_device *pdev)
 | 
						|
{
 | 
						|
	struct mmc_host *mmc;
 | 
						|
	struct goldfish_mmc_host *host = NULL;
 | 
						|
	struct resource *res;
 | 
						|
	int ret = 0;
 | 
						|
	int irq;
 | 
						|
	dma_addr_t buf_addr;
 | 
						|
 | 
						|
	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 | 
						|
	irq = platform_get_irq(pdev, 0);
 | 
						|
	if (res == NULL || irq < 0)
 | 
						|
		return -ENXIO;
 | 
						|
 | 
						|
	mmc = mmc_alloc_host(sizeof(struct goldfish_mmc_host), &pdev->dev);
 | 
						|
	if (mmc == NULL) {
 | 
						|
		ret = -ENOMEM;
 | 
						|
		goto err_alloc_host_failed;
 | 
						|
	}
 | 
						|
 | 
						|
	host = mmc_priv(mmc);
 | 
						|
	host->mmc = mmc;
 | 
						|
 | 
						|
	pr_err("mmc: Mapping %lX to %lX\n", (long)res->start, (long)res->end);
 | 
						|
	host->reg_base = ioremap(res->start, resource_size(res));
 | 
						|
	if (host->reg_base == NULL) {
 | 
						|
		ret = -ENOMEM;
 | 
						|
		goto ioremap_failed;
 | 
						|
	}
 | 
						|
	host->virt_base = dma_alloc_coherent(&pdev->dev, BUFFER_SIZE,
 | 
						|
					     &buf_addr, GFP_KERNEL);
 | 
						|
 | 
						|
	if (host->virt_base == 0) {
 | 
						|
		ret = -ENOMEM;
 | 
						|
		goto dma_alloc_failed;
 | 
						|
	}
 | 
						|
	host->phys_base = buf_addr;
 | 
						|
 | 
						|
	host->id = pdev->id;
 | 
						|
	host->irq = irq;
 | 
						|
 | 
						|
	mmc->ops = &goldfish_mmc_ops;
 | 
						|
	mmc->f_min = 400000;
 | 
						|
	mmc->f_max = 24000000;
 | 
						|
	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
 | 
						|
	mmc->caps = MMC_CAP_4_BIT_DATA;
 | 
						|
 | 
						|
	/* Use scatterlist DMA to reduce per-transfer costs.
 | 
						|
	 * NOTE max_seg_size assumption that small blocks aren't
 | 
						|
	 * normally used (except e.g. for reading SD registers).
 | 
						|
	 */
 | 
						|
	mmc->max_segs = 32;
 | 
						|
	mmc->max_blk_size = 2048;	/* MMC_BLOCK_LENGTH is 11 bits (+1) */
 | 
						|
	mmc->max_blk_count = 2048;	/* MMC_BLOCK_COUNT is 11 bits (+1) */
 | 
						|
	mmc->max_req_size = BUFFER_SIZE;
 | 
						|
	mmc->max_seg_size = mmc->max_req_size;
 | 
						|
 | 
						|
	ret = request_irq(host->irq, goldfish_mmc_irq, 0, DRIVER_NAME, host);
 | 
						|
	if (ret) {
 | 
						|
		dev_err(&pdev->dev, "Failed IRQ Adding goldfish MMC\n");
 | 
						|
		goto err_request_irq_failed;
 | 
						|
	}
 | 
						|
 | 
						|
	host->dev = &pdev->dev;
 | 
						|
	platform_set_drvdata(pdev, host);
 | 
						|
 | 
						|
	ret = device_create_file(&pdev->dev, &dev_attr_cover_switch);
 | 
						|
	if (ret)
 | 
						|
		dev_warn(mmc_dev(host->mmc),
 | 
						|
			 "Unable to create sysfs attributes\n");
 | 
						|
 | 
						|
	GOLDFISH_MMC_WRITE(host, MMC_SET_BUFFER, host->phys_base);
 | 
						|
	GOLDFISH_MMC_WRITE(host, MMC_INT_ENABLE,
 | 
						|
			   MMC_STAT_END_OF_CMD | MMC_STAT_END_OF_DATA |
 | 
						|
			   MMC_STAT_STATE_CHANGE | MMC_STAT_CMD_TIMEOUT);
 | 
						|
 | 
						|
	mmc_add_host(mmc);
 | 
						|
	return 0;
 | 
						|
 | 
						|
err_request_irq_failed:
 | 
						|
	dma_free_coherent(&pdev->dev, BUFFER_SIZE, host->virt_base,
 | 
						|
			  host->phys_base);
 | 
						|
dma_alloc_failed:
 | 
						|
	iounmap(host->reg_base);
 | 
						|
ioremap_failed:
 | 
						|
	mmc_free_host(host->mmc);
 | 
						|
err_alloc_host_failed:
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int goldfish_mmc_remove(struct platform_device *pdev)
 | 
						|
{
 | 
						|
	struct goldfish_mmc_host *host = platform_get_drvdata(pdev);
 | 
						|
 | 
						|
	platform_set_drvdata(pdev, NULL);
 | 
						|
 | 
						|
	BUG_ON(host == NULL);
 | 
						|
 | 
						|
	mmc_remove_host(host->mmc);
 | 
						|
	free_irq(host->irq, host);
 | 
						|
	dma_free_coherent(&pdev->dev, BUFFER_SIZE, host->virt_base, host->phys_base);
 | 
						|
	iounmap(host->reg_base);
 | 
						|
	mmc_free_host(host->mmc);
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static struct platform_driver goldfish_mmc_driver = {
 | 
						|
	.probe		= goldfish_mmc_probe,
 | 
						|
	.remove		= goldfish_mmc_remove,
 | 
						|
	.driver		= {
 | 
						|
		.name	= DRIVER_NAME,
 | 
						|
	},
 | 
						|
};
 | 
						|
 | 
						|
module_platform_driver(goldfish_mmc_driver);
 | 
						|
MODULE_LICENSE("GPL v2");
 |