The gadget power property will be used at get_status request. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
		
			
				
	
	
		
			1905 lines
		
	
	
	
		
			45 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			1905 lines
		
	
	
	
		
			45 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
/*
 | 
						|
 * udc.c - ChipIdea UDC driver
 | 
						|
 *
 | 
						|
 * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
 | 
						|
 *
 | 
						|
 * Author: David Lopo
 | 
						|
 *
 | 
						|
 * This program is free software; you can redistribute it and/or modify
 | 
						|
 * it under the terms of the GNU General Public License version 2 as
 | 
						|
 * published by the Free Software Foundation.
 | 
						|
 */
 | 
						|
 | 
						|
#include <linux/delay.h>
 | 
						|
#include <linux/device.h>
 | 
						|
#include <linux/dmapool.h>
 | 
						|
#include <linux/err.h>
 | 
						|
#include <linux/irqreturn.h>
 | 
						|
#include <linux/kernel.h>
 | 
						|
#include <linux/slab.h>
 | 
						|
#include <linux/pm_runtime.h>
 | 
						|
#include <linux/usb/ch9.h>
 | 
						|
#include <linux/usb/gadget.h>
 | 
						|
#include <linux/usb/otg-fsm.h>
 | 
						|
#include <linux/usb/chipidea.h>
 | 
						|
 | 
						|
#include "ci.h"
 | 
						|
#include "udc.h"
 | 
						|
#include "bits.h"
 | 
						|
#include "debug.h"
 | 
						|
#include "otg.h"
 | 
						|
#include "otg_fsm.h"
 | 
						|
 | 
						|
/* control endpoint description */
 | 
						|
static const struct usb_endpoint_descriptor
 | 
						|
ctrl_endpt_out_desc = {
 | 
						|
	.bLength         = USB_DT_ENDPOINT_SIZE,
 | 
						|
	.bDescriptorType = USB_DT_ENDPOINT,
 | 
						|
 | 
						|
	.bEndpointAddress = USB_DIR_OUT,
 | 
						|
	.bmAttributes    = USB_ENDPOINT_XFER_CONTROL,
 | 
						|
	.wMaxPacketSize  = cpu_to_le16(CTRL_PAYLOAD_MAX),
 | 
						|
};
 | 
						|
 | 
						|
static const struct usb_endpoint_descriptor
 | 
						|
ctrl_endpt_in_desc = {
 | 
						|
	.bLength         = USB_DT_ENDPOINT_SIZE,
 | 
						|
	.bDescriptorType = USB_DT_ENDPOINT,
 | 
						|
 | 
						|
	.bEndpointAddress = USB_DIR_IN,
 | 
						|
	.bmAttributes    = USB_ENDPOINT_XFER_CONTROL,
 | 
						|
	.wMaxPacketSize  = cpu_to_le16(CTRL_PAYLOAD_MAX),
 | 
						|
};
 | 
						|
 | 
						|
/**
 | 
						|
 * hw_ep_bit: calculates the bit number
 | 
						|
 * @num: endpoint number
 | 
						|
 * @dir: endpoint direction
 | 
						|
 *
 | 
						|
 * This function returns bit number
 | 
						|
 */
 | 
						|
static inline int hw_ep_bit(int num, int dir)
 | 
						|
{
 | 
						|
	return num + (dir ? 16 : 0);
 | 
						|
}
 | 
						|
 | 
						|
static inline int ep_to_bit(struct ci_hdrc *ci, int n)
 | 
						|
{
 | 
						|
	int fill = 16 - ci->hw_ep_max / 2;
 | 
						|
 | 
						|
	if (n >= ci->hw_ep_max / 2)
 | 
						|
		n += fill;
 | 
						|
 | 
						|
	return n;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * hw_device_state: enables/disables interrupts (execute without interruption)
 | 
						|
 * @dma: 0 => disable, !0 => enable and set dma engine
 | 
						|
 *
 | 
						|
 * This function returns an error code
 | 
						|
 */
 | 
						|
static int hw_device_state(struct ci_hdrc *ci, u32 dma)
 | 
						|
{
 | 
						|
	if (dma) {
 | 
						|
		hw_write(ci, OP_ENDPTLISTADDR, ~0, dma);
 | 
						|
		/* interrupt, error, port change, reset, sleep/suspend */
 | 
						|
		hw_write(ci, OP_USBINTR, ~0,
 | 
						|
			     USBi_UI|USBi_UEI|USBi_PCI|USBi_URI|USBi_SLI);
 | 
						|
		hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS);
 | 
						|
	} else {
 | 
						|
		hw_write(ci, OP_USBINTR, ~0, 0);
 | 
						|
		hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
 | 
						|
	}
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * hw_ep_flush: flush endpoint fifo (execute without interruption)
 | 
						|
 * @num: endpoint number
 | 
						|
 * @dir: endpoint direction
 | 
						|
 *
 | 
						|
 * This function returns an error code
 | 
						|
 */
 | 
						|
static int hw_ep_flush(struct ci_hdrc *ci, int num, int dir)
 | 
						|
{
 | 
						|
	int n = hw_ep_bit(num, dir);
 | 
						|
 | 
						|
	do {
 | 
						|
		/* flush any pending transfer */
 | 
						|
		hw_write(ci, OP_ENDPTFLUSH, ~0, BIT(n));
 | 
						|
		while (hw_read(ci, OP_ENDPTFLUSH, BIT(n)))
 | 
						|
			cpu_relax();
 | 
						|
	} while (hw_read(ci, OP_ENDPTSTAT, BIT(n)));
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * hw_ep_disable: disables endpoint (execute without interruption)
 | 
						|
 * @num: endpoint number
 | 
						|
 * @dir: endpoint direction
 | 
						|
 *
 | 
						|
 * This function returns an error code
 | 
						|
 */
 | 
						|
static int hw_ep_disable(struct ci_hdrc *ci, int num, int dir)
 | 
						|
{
 | 
						|
	hw_ep_flush(ci, num, dir);
 | 
						|
	hw_write(ci, OP_ENDPTCTRL + num,
 | 
						|
		 dir ? ENDPTCTRL_TXE : ENDPTCTRL_RXE, 0);
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * hw_ep_enable: enables endpoint (execute without interruption)
 | 
						|
 * @num:  endpoint number
 | 
						|
 * @dir:  endpoint direction
 | 
						|
 * @type: endpoint type
 | 
						|
 *
 | 
						|
 * This function returns an error code
 | 
						|
 */
 | 
						|
static int hw_ep_enable(struct ci_hdrc *ci, int num, int dir, int type)
 | 
						|
{
 | 
						|
	u32 mask, data;
 | 
						|
 | 
						|
	if (dir) {
 | 
						|
		mask  = ENDPTCTRL_TXT;  /* type    */
 | 
						|
		data  = type << __ffs(mask);
 | 
						|
 | 
						|
		mask |= ENDPTCTRL_TXS;  /* unstall */
 | 
						|
		mask |= ENDPTCTRL_TXR;  /* reset data toggle */
 | 
						|
		data |= ENDPTCTRL_TXR;
 | 
						|
		mask |= ENDPTCTRL_TXE;  /* enable  */
 | 
						|
		data |= ENDPTCTRL_TXE;
 | 
						|
	} else {
 | 
						|
		mask  = ENDPTCTRL_RXT;  /* type    */
 | 
						|
		data  = type << __ffs(mask);
 | 
						|
 | 
						|
		mask |= ENDPTCTRL_RXS;  /* unstall */
 | 
						|
		mask |= ENDPTCTRL_RXR;  /* reset data toggle */
 | 
						|
		data |= ENDPTCTRL_RXR;
 | 
						|
		mask |= ENDPTCTRL_RXE;  /* enable  */
 | 
						|
		data |= ENDPTCTRL_RXE;
 | 
						|
	}
 | 
						|
	hw_write(ci, OP_ENDPTCTRL + num, mask, data);
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * hw_ep_get_halt: return endpoint halt status
 | 
						|
 * @num: endpoint number
 | 
						|
 * @dir: endpoint direction
 | 
						|
 *
 | 
						|
 * This function returns 1 if endpoint halted
 | 
						|
 */
 | 
						|
static int hw_ep_get_halt(struct ci_hdrc *ci, int num, int dir)
 | 
						|
{
 | 
						|
	u32 mask = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS;
 | 
						|
 | 
						|
	return hw_read(ci, OP_ENDPTCTRL + num, mask) ? 1 : 0;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * hw_ep_prime: primes endpoint (execute without interruption)
 | 
						|
 * @num:     endpoint number
 | 
						|
 * @dir:     endpoint direction
 | 
						|
 * @is_ctrl: true if control endpoint
 | 
						|
 *
 | 
						|
 * This function returns an error code
 | 
						|
 */
 | 
						|
static int hw_ep_prime(struct ci_hdrc *ci, int num, int dir, int is_ctrl)
 | 
						|
{
 | 
						|
	int n = hw_ep_bit(num, dir);
 | 
						|
 | 
						|
	if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num)))
 | 
						|
		return -EAGAIN;
 | 
						|
 | 
						|
	hw_write(ci, OP_ENDPTPRIME, ~0, BIT(n));
 | 
						|
 | 
						|
	while (hw_read(ci, OP_ENDPTPRIME, BIT(n)))
 | 
						|
		cpu_relax();
 | 
						|
	if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num)))
 | 
						|
		return -EAGAIN;
 | 
						|
 | 
						|
	/* status shoult be tested according with manual but it doesn't work */
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * hw_ep_set_halt: configures ep halt & resets data toggle after clear (execute
 | 
						|
 *                 without interruption)
 | 
						|
 * @num:   endpoint number
 | 
						|
 * @dir:   endpoint direction
 | 
						|
 * @value: true => stall, false => unstall
 | 
						|
 *
 | 
						|
 * This function returns an error code
 | 
						|
 */
 | 
						|
static int hw_ep_set_halt(struct ci_hdrc *ci, int num, int dir, int value)
 | 
						|
{
 | 
						|
	if (value != 0 && value != 1)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	do {
 | 
						|
		enum ci_hw_regs reg = OP_ENDPTCTRL + num;
 | 
						|
		u32 mask_xs = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS;
 | 
						|
		u32 mask_xr = dir ? ENDPTCTRL_TXR : ENDPTCTRL_RXR;
 | 
						|
 | 
						|
		/* data toggle - reserved for EP0 but it's in ESS */
 | 
						|
		hw_write(ci, reg, mask_xs|mask_xr,
 | 
						|
			  value ? mask_xs : mask_xr);
 | 
						|
	} while (value != hw_ep_get_halt(ci, num, dir));
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * hw_is_port_high_speed: test if port is high speed
 | 
						|
 *
 | 
						|
 * This function returns true if high speed port
 | 
						|
 */
 | 
						|
static int hw_port_is_high_speed(struct ci_hdrc *ci)
 | 
						|
{
 | 
						|
	return ci->hw_bank.lpm ? hw_read(ci, OP_DEVLC, DEVLC_PSPD) :
 | 
						|
		hw_read(ci, OP_PORTSC, PORTSC_HSP);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * hw_test_and_clear_complete: test & clear complete status (execute without
 | 
						|
 *                             interruption)
 | 
						|
 * @n: endpoint number
 | 
						|
 *
 | 
						|
 * This function returns complete status
 | 
						|
 */
 | 
						|
static int hw_test_and_clear_complete(struct ci_hdrc *ci, int n)
 | 
						|
{
 | 
						|
	n = ep_to_bit(ci, n);
 | 
						|
	return hw_test_and_clear(ci, OP_ENDPTCOMPLETE, BIT(n));
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * hw_test_and_clear_intr_active: test & clear active interrupts (execute
 | 
						|
 *                                without interruption)
 | 
						|
 *
 | 
						|
 * This function returns active interrutps
 | 
						|
 */
 | 
						|
static u32 hw_test_and_clear_intr_active(struct ci_hdrc *ci)
 | 
						|
{
 | 
						|
	u32 reg = hw_read_intr_status(ci) & hw_read_intr_enable(ci);
 | 
						|
 | 
						|
	hw_write(ci, OP_USBSTS, ~0, reg);
 | 
						|
	return reg;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * hw_test_and_clear_setup_guard: test & clear setup guard (execute without
 | 
						|
 *                                interruption)
 | 
						|
 *
 | 
						|
 * This function returns guard value
 | 
						|
 */
 | 
						|
static int hw_test_and_clear_setup_guard(struct ci_hdrc *ci)
 | 
						|
{
 | 
						|
	return hw_test_and_write(ci, OP_USBCMD, USBCMD_SUTW, 0);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * hw_test_and_set_setup_guard: test & set setup guard (execute without
 | 
						|
 *                              interruption)
 | 
						|
 *
 | 
						|
 * This function returns guard value
 | 
						|
 */
 | 
						|
static int hw_test_and_set_setup_guard(struct ci_hdrc *ci)
 | 
						|
{
 | 
						|
	return hw_test_and_write(ci, OP_USBCMD, USBCMD_SUTW, USBCMD_SUTW);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * hw_usb_set_address: configures USB address (execute without interruption)
 | 
						|
 * @value: new USB address
 | 
						|
 *
 | 
						|
 * This function explicitly sets the address, without the "USBADRA" (advance)
 | 
						|
 * feature, which is not supported by older versions of the controller.
 | 
						|
 */
 | 
						|
static void hw_usb_set_address(struct ci_hdrc *ci, u8 value)
 | 
						|
{
 | 
						|
	hw_write(ci, OP_DEVICEADDR, DEVICEADDR_USBADR,
 | 
						|
		 value << __ffs(DEVICEADDR_USBADR));
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * hw_usb_reset: restart device after a bus reset (execute without
 | 
						|
 *               interruption)
 | 
						|
 *
 | 
						|
 * This function returns an error code
 | 
						|
 */
 | 
						|
static int hw_usb_reset(struct ci_hdrc *ci)
 | 
						|
{
 | 
						|
	hw_usb_set_address(ci, 0);
 | 
						|
 | 
						|
	/* ESS flushes only at end?!? */
 | 
						|
	hw_write(ci, OP_ENDPTFLUSH,    ~0, ~0);
 | 
						|
 | 
						|
	/* clear setup token semaphores */
 | 
						|
	hw_write(ci, OP_ENDPTSETUPSTAT, 0,  0);
 | 
						|
 | 
						|
	/* clear complete status */
 | 
						|
	hw_write(ci, OP_ENDPTCOMPLETE,  0,  0);
 | 
						|
 | 
						|
	/* wait until all bits cleared */
 | 
						|
	while (hw_read(ci, OP_ENDPTPRIME, ~0))
 | 
						|
		udelay(10);             /* not RTOS friendly */
 | 
						|
 | 
						|
	/* reset all endpoints ? */
 | 
						|
 | 
						|
	/* reset internal status and wait for further instructions
 | 
						|
	   no need to verify the port reset status (ESS does it) */
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
/******************************************************************************
 | 
						|
 * UTIL block
 | 
						|
 *****************************************************************************/
 | 
						|
 | 
						|
static int add_td_to_list(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq,
 | 
						|
			  unsigned length)
 | 
						|
{
 | 
						|
	int i;
 | 
						|
	u32 temp;
 | 
						|
	struct td_node *lastnode, *node = kzalloc(sizeof(struct td_node),
 | 
						|
						  GFP_ATOMIC);
 | 
						|
 | 
						|
	if (node == NULL)
 | 
						|
		return -ENOMEM;
 | 
						|
 | 
						|
	node->ptr = dma_pool_alloc(hwep->td_pool, GFP_ATOMIC,
 | 
						|
				   &node->dma);
 | 
						|
	if (node->ptr == NULL) {
 | 
						|
		kfree(node);
 | 
						|
		return -ENOMEM;
 | 
						|
	}
 | 
						|
 | 
						|
	memset(node->ptr, 0, sizeof(struct ci_hw_td));
 | 
						|
	node->ptr->token = cpu_to_le32(length << __ffs(TD_TOTAL_BYTES));
 | 
						|
	node->ptr->token &= cpu_to_le32(TD_TOTAL_BYTES);
 | 
						|
	node->ptr->token |= cpu_to_le32(TD_STATUS_ACTIVE);
 | 
						|
	if (hwep->type == USB_ENDPOINT_XFER_ISOC && hwep->dir == TX) {
 | 
						|
		u32 mul = hwreq->req.length / hwep->ep.maxpacket;
 | 
						|
 | 
						|
		if (hwreq->req.length == 0
 | 
						|
				|| hwreq->req.length % hwep->ep.maxpacket)
 | 
						|
			mul++;
 | 
						|
		node->ptr->token |= mul << __ffs(TD_MULTO);
 | 
						|
	}
 | 
						|
 | 
						|
	temp = (u32) (hwreq->req.dma + hwreq->req.actual);
 | 
						|
	if (length) {
 | 
						|
		node->ptr->page[0] = cpu_to_le32(temp);
 | 
						|
		for (i = 1; i < TD_PAGE_COUNT; i++) {
 | 
						|
			u32 page = temp + i * CI_HDRC_PAGE_SIZE;
 | 
						|
			page &= ~TD_RESERVED_MASK;
 | 
						|
			node->ptr->page[i] = cpu_to_le32(page);
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	hwreq->req.actual += length;
 | 
						|
 | 
						|
	if (!list_empty(&hwreq->tds)) {
 | 
						|
		/* get the last entry */
 | 
						|
		lastnode = list_entry(hwreq->tds.prev,
 | 
						|
				struct td_node, td);
 | 
						|
		lastnode->ptr->next = cpu_to_le32(node->dma);
 | 
						|
	}
 | 
						|
 | 
						|
	INIT_LIST_HEAD(&node->td);
 | 
						|
	list_add_tail(&node->td, &hwreq->tds);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * _usb_addr: calculates endpoint address from direction & number
 | 
						|
 * @ep:  endpoint
 | 
						|
 */
 | 
						|
static inline u8 _usb_addr(struct ci_hw_ep *ep)
 | 
						|
{
 | 
						|
	return ((ep->dir == TX) ? USB_ENDPOINT_DIR_MASK : 0) | ep->num;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * _hardware_queue: configures a request at hardware level
 | 
						|
 * @gadget: gadget
 | 
						|
 * @hwep:   endpoint
 | 
						|
 *
 | 
						|
 * This function returns an error code
 | 
						|
 */
 | 
						|
static int _hardware_enqueue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq)
 | 
						|
{
 | 
						|
	struct ci_hdrc *ci = hwep->ci;
 | 
						|
	int ret = 0;
 | 
						|
	unsigned rest = hwreq->req.length;
 | 
						|
	int pages = TD_PAGE_COUNT;
 | 
						|
	struct td_node *firstnode, *lastnode;
 | 
						|
 | 
						|
	/* don't queue twice */
 | 
						|
	if (hwreq->req.status == -EALREADY)
 | 
						|
		return -EALREADY;
 | 
						|
 | 
						|
	hwreq->req.status = -EALREADY;
 | 
						|
 | 
						|
	ret = usb_gadget_map_request(&ci->gadget, &hwreq->req, hwep->dir);
 | 
						|
	if (ret)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	/*
 | 
						|
	 * The first buffer could be not page aligned.
 | 
						|
	 * In that case we have to span into one extra td.
 | 
						|
	 */
 | 
						|
	if (hwreq->req.dma % PAGE_SIZE)
 | 
						|
		pages--;
 | 
						|
 | 
						|
	if (rest == 0)
 | 
						|
		add_td_to_list(hwep, hwreq, 0);
 | 
						|
 | 
						|
	while (rest > 0) {
 | 
						|
		unsigned count = min(hwreq->req.length - hwreq->req.actual,
 | 
						|
					(unsigned)(pages * CI_HDRC_PAGE_SIZE));
 | 
						|
		add_td_to_list(hwep, hwreq, count);
 | 
						|
		rest -= count;
 | 
						|
	}
 | 
						|
 | 
						|
	if (hwreq->req.zero && hwreq->req.length
 | 
						|
	    && (hwreq->req.length % hwep->ep.maxpacket == 0))
 | 
						|
		add_td_to_list(hwep, hwreq, 0);
 | 
						|
 | 
						|
	firstnode = list_first_entry(&hwreq->tds, struct td_node, td);
 | 
						|
 | 
						|
	lastnode = list_entry(hwreq->tds.prev,
 | 
						|
		struct td_node, td);
 | 
						|
 | 
						|
	lastnode->ptr->next = cpu_to_le32(TD_TERMINATE);
 | 
						|
	if (!hwreq->req.no_interrupt)
 | 
						|
		lastnode->ptr->token |= cpu_to_le32(TD_IOC);
 | 
						|
	wmb();
 | 
						|
 | 
						|
	hwreq->req.actual = 0;
 | 
						|
	if (!list_empty(&hwep->qh.queue)) {
 | 
						|
		struct ci_hw_req *hwreqprev;
 | 
						|
		int n = hw_ep_bit(hwep->num, hwep->dir);
 | 
						|
		int tmp_stat;
 | 
						|
		struct td_node *prevlastnode;
 | 
						|
		u32 next = firstnode->dma & TD_ADDR_MASK;
 | 
						|
 | 
						|
		hwreqprev = list_entry(hwep->qh.queue.prev,
 | 
						|
				struct ci_hw_req, queue);
 | 
						|
		prevlastnode = list_entry(hwreqprev->tds.prev,
 | 
						|
				struct td_node, td);
 | 
						|
 | 
						|
		prevlastnode->ptr->next = cpu_to_le32(next);
 | 
						|
		wmb();
 | 
						|
		if (hw_read(ci, OP_ENDPTPRIME, BIT(n)))
 | 
						|
			goto done;
 | 
						|
		do {
 | 
						|
			hw_write(ci, OP_USBCMD, USBCMD_ATDTW, USBCMD_ATDTW);
 | 
						|
			tmp_stat = hw_read(ci, OP_ENDPTSTAT, BIT(n));
 | 
						|
		} while (!hw_read(ci, OP_USBCMD, USBCMD_ATDTW));
 | 
						|
		hw_write(ci, OP_USBCMD, USBCMD_ATDTW, 0);
 | 
						|
		if (tmp_stat)
 | 
						|
			goto done;
 | 
						|
	}
 | 
						|
 | 
						|
	/*  QH configuration */
 | 
						|
	hwep->qh.ptr->td.next = cpu_to_le32(firstnode->dma);
 | 
						|
	hwep->qh.ptr->td.token &=
 | 
						|
		cpu_to_le32(~(TD_STATUS_HALTED|TD_STATUS_ACTIVE));
 | 
						|
 | 
						|
	if (hwep->type == USB_ENDPOINT_XFER_ISOC && hwep->dir == RX) {
 | 
						|
		u32 mul = hwreq->req.length / hwep->ep.maxpacket;
 | 
						|
 | 
						|
		if (hwreq->req.length == 0
 | 
						|
				|| hwreq->req.length % hwep->ep.maxpacket)
 | 
						|
			mul++;
 | 
						|
		hwep->qh.ptr->cap |= mul << __ffs(QH_MULT);
 | 
						|
	}
 | 
						|
 | 
						|
	wmb();   /* synchronize before ep prime */
 | 
						|
 | 
						|
	ret = hw_ep_prime(ci, hwep->num, hwep->dir,
 | 
						|
			   hwep->type == USB_ENDPOINT_XFER_CONTROL);
 | 
						|
done:
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
/*
 | 
						|
 * free_pending_td: remove a pending request for the endpoint
 | 
						|
 * @hwep: endpoint
 | 
						|
 */
 | 
						|
static void free_pending_td(struct ci_hw_ep *hwep)
 | 
						|
{
 | 
						|
	struct td_node *pending = hwep->pending_td;
 | 
						|
 | 
						|
	dma_pool_free(hwep->td_pool, pending->ptr, pending->dma);
 | 
						|
	hwep->pending_td = NULL;
 | 
						|
	kfree(pending);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * _hardware_dequeue: handles a request at hardware level
 | 
						|
 * @gadget: gadget
 | 
						|
 * @hwep:   endpoint
 | 
						|
 *
 | 
						|
 * This function returns an error code
 | 
						|
 */
 | 
						|
static int _hardware_dequeue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq)
 | 
						|
{
 | 
						|
	u32 tmptoken;
 | 
						|
	struct td_node *node, *tmpnode;
 | 
						|
	unsigned remaining_length;
 | 
						|
	unsigned actual = hwreq->req.length;
 | 
						|
 | 
						|
	if (hwreq->req.status != -EALREADY)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	hwreq->req.status = 0;
 | 
						|
 | 
						|
	list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) {
 | 
						|
		tmptoken = le32_to_cpu(node->ptr->token);
 | 
						|
		if ((TD_STATUS_ACTIVE & tmptoken) != 0) {
 | 
						|
			hwreq->req.status = -EALREADY;
 | 
						|
			return -EBUSY;
 | 
						|
		}
 | 
						|
 | 
						|
		remaining_length = (tmptoken & TD_TOTAL_BYTES);
 | 
						|
		remaining_length >>= __ffs(TD_TOTAL_BYTES);
 | 
						|
		actual -= remaining_length;
 | 
						|
 | 
						|
		hwreq->req.status = tmptoken & TD_STATUS;
 | 
						|
		if ((TD_STATUS_HALTED & hwreq->req.status)) {
 | 
						|
			hwreq->req.status = -EPIPE;
 | 
						|
			break;
 | 
						|
		} else if ((TD_STATUS_DT_ERR & hwreq->req.status)) {
 | 
						|
			hwreq->req.status = -EPROTO;
 | 
						|
			break;
 | 
						|
		} else if ((TD_STATUS_TR_ERR & hwreq->req.status)) {
 | 
						|
			hwreq->req.status = -EILSEQ;
 | 
						|
			break;
 | 
						|
		}
 | 
						|
 | 
						|
		if (remaining_length) {
 | 
						|
			if (hwep->dir) {
 | 
						|
				hwreq->req.status = -EPROTO;
 | 
						|
				break;
 | 
						|
			}
 | 
						|
		}
 | 
						|
		/*
 | 
						|
		 * As the hardware could still address the freed td
 | 
						|
		 * which will run the udc unusable, the cleanup of the
 | 
						|
		 * td has to be delayed by one.
 | 
						|
		 */
 | 
						|
		if (hwep->pending_td)
 | 
						|
			free_pending_td(hwep);
 | 
						|
 | 
						|
		hwep->pending_td = node;
 | 
						|
		list_del_init(&node->td);
 | 
						|
	}
 | 
						|
 | 
						|
	usb_gadget_unmap_request(&hwep->ci->gadget, &hwreq->req, hwep->dir);
 | 
						|
 | 
						|
	hwreq->req.actual += actual;
 | 
						|
 | 
						|
	if (hwreq->req.status)
 | 
						|
		return hwreq->req.status;
 | 
						|
 | 
						|
	return hwreq->req.actual;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * _ep_nuke: dequeues all endpoint requests
 | 
						|
 * @hwep: endpoint
 | 
						|
 *
 | 
						|
 * This function returns an error code
 | 
						|
 * Caller must hold lock
 | 
						|
 */
 | 
						|
static int _ep_nuke(struct ci_hw_ep *hwep)
 | 
						|
__releases(hwep->lock)
 | 
						|
__acquires(hwep->lock)
 | 
						|
{
 | 
						|
	struct td_node *node, *tmpnode;
 | 
						|
	if (hwep == NULL)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	hw_ep_flush(hwep->ci, hwep->num, hwep->dir);
 | 
						|
 | 
						|
	while (!list_empty(&hwep->qh.queue)) {
 | 
						|
 | 
						|
		/* pop oldest request */
 | 
						|
		struct ci_hw_req *hwreq = list_entry(hwep->qh.queue.next,
 | 
						|
						     struct ci_hw_req, queue);
 | 
						|
 | 
						|
		list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) {
 | 
						|
			dma_pool_free(hwep->td_pool, node->ptr, node->dma);
 | 
						|
			list_del_init(&node->td);
 | 
						|
			node->ptr = NULL;
 | 
						|
			kfree(node);
 | 
						|
		}
 | 
						|
 | 
						|
		list_del_init(&hwreq->queue);
 | 
						|
		hwreq->req.status = -ESHUTDOWN;
 | 
						|
 | 
						|
		if (hwreq->req.complete != NULL) {
 | 
						|
			spin_unlock(hwep->lock);
 | 
						|
			usb_gadget_giveback_request(&hwep->ep, &hwreq->req);
 | 
						|
			spin_lock(hwep->lock);
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	if (hwep->pending_td)
 | 
						|
		free_pending_td(hwep);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * _gadget_stop_activity: stops all USB activity, flushes & disables all endpts
 | 
						|
 * @gadget: gadget
 | 
						|
 *
 | 
						|
 * This function returns an error code
 | 
						|
 */
 | 
						|
static int _gadget_stop_activity(struct usb_gadget *gadget)
 | 
						|
{
 | 
						|
	struct usb_ep *ep;
 | 
						|
	struct ci_hdrc    *ci = container_of(gadget, struct ci_hdrc, gadget);
 | 
						|
	unsigned long flags;
 | 
						|
 | 
						|
	spin_lock_irqsave(&ci->lock, flags);
 | 
						|
	ci->gadget.speed = USB_SPEED_UNKNOWN;
 | 
						|
	ci->remote_wakeup = 0;
 | 
						|
	ci->suspended = 0;
 | 
						|
	spin_unlock_irqrestore(&ci->lock, flags);
 | 
						|
 | 
						|
	/* flush all endpoints */
 | 
						|
	gadget_for_each_ep(ep, gadget) {
 | 
						|
		usb_ep_fifo_flush(ep);
 | 
						|
	}
 | 
						|
	usb_ep_fifo_flush(&ci->ep0out->ep);
 | 
						|
	usb_ep_fifo_flush(&ci->ep0in->ep);
 | 
						|
 | 
						|
	/* make sure to disable all endpoints */
 | 
						|
	gadget_for_each_ep(ep, gadget) {
 | 
						|
		usb_ep_disable(ep);
 | 
						|
	}
 | 
						|
 | 
						|
	if (ci->status != NULL) {
 | 
						|
		usb_ep_free_request(&ci->ep0in->ep, ci->status);
 | 
						|
		ci->status = NULL;
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
/******************************************************************************
 | 
						|
 * ISR block
 | 
						|
 *****************************************************************************/
 | 
						|
/**
 | 
						|
 * isr_reset_handler: USB reset interrupt handler
 | 
						|
 * @ci: UDC device
 | 
						|
 *
 | 
						|
 * This function resets USB engine after a bus reset occurred
 | 
						|
 */
 | 
						|
static void isr_reset_handler(struct ci_hdrc *ci)
 | 
						|
__releases(ci->lock)
 | 
						|
__acquires(ci->lock)
 | 
						|
{
 | 
						|
	int retval;
 | 
						|
 | 
						|
	spin_unlock(&ci->lock);
 | 
						|
	if (ci->gadget.speed != USB_SPEED_UNKNOWN)
 | 
						|
		usb_gadget_udc_reset(&ci->gadget, ci->driver);
 | 
						|
 | 
						|
	retval = _gadget_stop_activity(&ci->gadget);
 | 
						|
	if (retval)
 | 
						|
		goto done;
 | 
						|
 | 
						|
	retval = hw_usb_reset(ci);
 | 
						|
	if (retval)
 | 
						|
		goto done;
 | 
						|
 | 
						|
	ci->status = usb_ep_alloc_request(&ci->ep0in->ep, GFP_ATOMIC);
 | 
						|
	if (ci->status == NULL)
 | 
						|
		retval = -ENOMEM;
 | 
						|
 | 
						|
done:
 | 
						|
	spin_lock(&ci->lock);
 | 
						|
 | 
						|
	if (retval)
 | 
						|
		dev_err(ci->dev, "error: %i\n", retval);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * isr_get_status_complete: get_status request complete function
 | 
						|
 * @ep:  endpoint
 | 
						|
 * @req: request handled
 | 
						|
 *
 | 
						|
 * Caller must release lock
 | 
						|
 */
 | 
						|
static void isr_get_status_complete(struct usb_ep *ep, struct usb_request *req)
 | 
						|
{
 | 
						|
	if (ep == NULL || req == NULL)
 | 
						|
		return;
 | 
						|
 | 
						|
	kfree(req->buf);
 | 
						|
	usb_ep_free_request(ep, req);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * _ep_queue: queues (submits) an I/O request to an endpoint
 | 
						|
 *
 | 
						|
 * Caller must hold lock
 | 
						|
 */
 | 
						|
static int _ep_queue(struct usb_ep *ep, struct usb_request *req,
 | 
						|
		    gfp_t __maybe_unused gfp_flags)
 | 
						|
{
 | 
						|
	struct ci_hw_ep  *hwep  = container_of(ep,  struct ci_hw_ep, ep);
 | 
						|
	struct ci_hw_req *hwreq = container_of(req, struct ci_hw_req, req);
 | 
						|
	struct ci_hdrc *ci = hwep->ci;
 | 
						|
	int retval = 0;
 | 
						|
 | 
						|
	if (ep == NULL || req == NULL || hwep->ep.desc == NULL)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	if (hwep->type == USB_ENDPOINT_XFER_CONTROL) {
 | 
						|
		if (req->length)
 | 
						|
			hwep = (ci->ep0_dir == RX) ?
 | 
						|
			       ci->ep0out : ci->ep0in;
 | 
						|
		if (!list_empty(&hwep->qh.queue)) {
 | 
						|
			_ep_nuke(hwep);
 | 
						|
			retval = -EOVERFLOW;
 | 
						|
			dev_warn(hwep->ci->dev, "endpoint ctrl %X nuked\n",
 | 
						|
				 _usb_addr(hwep));
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	if (usb_endpoint_xfer_isoc(hwep->ep.desc) &&
 | 
						|
	    hwreq->req.length > (1 + hwep->ep.mult) * hwep->ep.maxpacket) {
 | 
						|
		dev_err(hwep->ci->dev, "request length too big for isochronous\n");
 | 
						|
		return -EMSGSIZE;
 | 
						|
	}
 | 
						|
 | 
						|
	/* first nuke then test link, e.g. previous status has not sent */
 | 
						|
	if (!list_empty(&hwreq->queue)) {
 | 
						|
		dev_err(hwep->ci->dev, "request already in queue\n");
 | 
						|
		return -EBUSY;
 | 
						|
	}
 | 
						|
 | 
						|
	/* push request */
 | 
						|
	hwreq->req.status = -EINPROGRESS;
 | 
						|
	hwreq->req.actual = 0;
 | 
						|
 | 
						|
	retval = _hardware_enqueue(hwep, hwreq);
 | 
						|
 | 
						|
	if (retval == -EALREADY)
 | 
						|
		retval = 0;
 | 
						|
	if (!retval)
 | 
						|
		list_add_tail(&hwreq->queue, &hwep->qh.queue);
 | 
						|
 | 
						|
	return retval;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * isr_get_status_response: get_status request response
 | 
						|
 * @ci: ci struct
 | 
						|
 * @setup: setup request packet
 | 
						|
 *
 | 
						|
 * This function returns an error code
 | 
						|
 */
 | 
						|
static int isr_get_status_response(struct ci_hdrc *ci,
 | 
						|
				   struct usb_ctrlrequest *setup)
 | 
						|
__releases(hwep->lock)
 | 
						|
__acquires(hwep->lock)
 | 
						|
{
 | 
						|
	struct ci_hw_ep *hwep = ci->ep0in;
 | 
						|
	struct usb_request *req = NULL;
 | 
						|
	gfp_t gfp_flags = GFP_ATOMIC;
 | 
						|
	int dir, num, retval;
 | 
						|
 | 
						|
	if (hwep == NULL || setup == NULL)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	spin_unlock(hwep->lock);
 | 
						|
	req = usb_ep_alloc_request(&hwep->ep, gfp_flags);
 | 
						|
	spin_lock(hwep->lock);
 | 
						|
	if (req == NULL)
 | 
						|
		return -ENOMEM;
 | 
						|
 | 
						|
	req->complete = isr_get_status_complete;
 | 
						|
	req->length   = 2;
 | 
						|
	req->buf      = kzalloc(req->length, gfp_flags);
 | 
						|
	if (req->buf == NULL) {
 | 
						|
		retval = -ENOMEM;
 | 
						|
		goto err_free_req;
 | 
						|
	}
 | 
						|
 | 
						|
	if ((setup->bRequestType & USB_RECIP_MASK) == USB_RECIP_DEVICE) {
 | 
						|
		*(u16 *)req->buf = (ci->remote_wakeup << 1) |
 | 
						|
			ci->gadget.is_selfpowered;
 | 
						|
	} else if ((setup->bRequestType & USB_RECIP_MASK) \
 | 
						|
		   == USB_RECIP_ENDPOINT) {
 | 
						|
		dir = (le16_to_cpu(setup->wIndex) & USB_ENDPOINT_DIR_MASK) ?
 | 
						|
			TX : RX;
 | 
						|
		num =  le16_to_cpu(setup->wIndex) & USB_ENDPOINT_NUMBER_MASK;
 | 
						|
		*(u16 *)req->buf = hw_ep_get_halt(ci, num, dir);
 | 
						|
	}
 | 
						|
	/* else do nothing; reserved for future use */
 | 
						|
 | 
						|
	retval = _ep_queue(&hwep->ep, req, gfp_flags);
 | 
						|
	if (retval)
 | 
						|
		goto err_free_buf;
 | 
						|
 | 
						|
	return 0;
 | 
						|
 | 
						|
 err_free_buf:
 | 
						|
	kfree(req->buf);
 | 
						|
 err_free_req:
 | 
						|
	spin_unlock(hwep->lock);
 | 
						|
	usb_ep_free_request(&hwep->ep, req);
 | 
						|
	spin_lock(hwep->lock);
 | 
						|
	return retval;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * isr_setup_status_complete: setup_status request complete function
 | 
						|
 * @ep:  endpoint
 | 
						|
 * @req: request handled
 | 
						|
 *
 | 
						|
 * Caller must release lock. Put the port in test mode if test mode
 | 
						|
 * feature is selected.
 | 
						|
 */
 | 
						|
static void
 | 
						|
isr_setup_status_complete(struct usb_ep *ep, struct usb_request *req)
 | 
						|
{
 | 
						|
	struct ci_hdrc *ci = req->context;
 | 
						|
	unsigned long flags;
 | 
						|
 | 
						|
	if (ci->setaddr) {
 | 
						|
		hw_usb_set_address(ci, ci->address);
 | 
						|
		ci->setaddr = false;
 | 
						|
		if (ci->address)
 | 
						|
			usb_gadget_set_state(&ci->gadget, USB_STATE_ADDRESS);
 | 
						|
	}
 | 
						|
 | 
						|
	spin_lock_irqsave(&ci->lock, flags);
 | 
						|
	if (ci->test_mode)
 | 
						|
		hw_port_test_set(ci, ci->test_mode);
 | 
						|
	spin_unlock_irqrestore(&ci->lock, flags);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * isr_setup_status_phase: queues the status phase of a setup transation
 | 
						|
 * @ci: ci struct
 | 
						|
 *
 | 
						|
 * This function returns an error code
 | 
						|
 */
 | 
						|
static int isr_setup_status_phase(struct ci_hdrc *ci)
 | 
						|
{
 | 
						|
	int retval;
 | 
						|
	struct ci_hw_ep *hwep;
 | 
						|
 | 
						|
	hwep = (ci->ep0_dir == TX) ? ci->ep0out : ci->ep0in;
 | 
						|
	ci->status->context = ci;
 | 
						|
	ci->status->complete = isr_setup_status_complete;
 | 
						|
 | 
						|
	retval = _ep_queue(&hwep->ep, ci->status, GFP_ATOMIC);
 | 
						|
 | 
						|
	return retval;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * isr_tr_complete_low: transaction complete low level handler
 | 
						|
 * @hwep: endpoint
 | 
						|
 *
 | 
						|
 * This function returns an error code
 | 
						|
 * Caller must hold lock
 | 
						|
 */
 | 
						|
static int isr_tr_complete_low(struct ci_hw_ep *hwep)
 | 
						|
__releases(hwep->lock)
 | 
						|
__acquires(hwep->lock)
 | 
						|
{
 | 
						|
	struct ci_hw_req *hwreq, *hwreqtemp;
 | 
						|
	struct ci_hw_ep *hweptemp = hwep;
 | 
						|
	int retval = 0;
 | 
						|
 | 
						|
	list_for_each_entry_safe(hwreq, hwreqtemp, &hwep->qh.queue,
 | 
						|
			queue) {
 | 
						|
		retval = _hardware_dequeue(hwep, hwreq);
 | 
						|
		if (retval < 0)
 | 
						|
			break;
 | 
						|
		list_del_init(&hwreq->queue);
 | 
						|
		if (hwreq->req.complete != NULL) {
 | 
						|
			spin_unlock(hwep->lock);
 | 
						|
			if ((hwep->type == USB_ENDPOINT_XFER_CONTROL) &&
 | 
						|
					hwreq->req.length)
 | 
						|
				hweptemp = hwep->ci->ep0in;
 | 
						|
			usb_gadget_giveback_request(&hweptemp->ep, &hwreq->req);
 | 
						|
			spin_lock(hwep->lock);
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	if (retval == -EBUSY)
 | 
						|
		retval = 0;
 | 
						|
 | 
						|
	return retval;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * isr_setup_packet_handler: setup packet handler
 | 
						|
 * @ci: UDC descriptor
 | 
						|
 *
 | 
						|
 * This function handles setup packet 
 | 
						|
 */
 | 
						|
static void isr_setup_packet_handler(struct ci_hdrc *ci)
 | 
						|
__releases(ci->lock)
 | 
						|
__acquires(ci->lock)
 | 
						|
{
 | 
						|
	struct ci_hw_ep *hwep = &ci->ci_hw_ep[0];
 | 
						|
	struct usb_ctrlrequest req;
 | 
						|
	int type, num, dir, err = -EINVAL;
 | 
						|
	u8 tmode = 0;
 | 
						|
 | 
						|
	/*
 | 
						|
	 * Flush data and handshake transactions of previous
 | 
						|
	 * setup packet.
 | 
						|
	 */
 | 
						|
	_ep_nuke(ci->ep0out);
 | 
						|
	_ep_nuke(ci->ep0in);
 | 
						|
 | 
						|
	/* read_setup_packet */
 | 
						|
	do {
 | 
						|
		hw_test_and_set_setup_guard(ci);
 | 
						|
		memcpy(&req, &hwep->qh.ptr->setup, sizeof(req));
 | 
						|
	} while (!hw_test_and_clear_setup_guard(ci));
 | 
						|
 | 
						|
	type = req.bRequestType;
 | 
						|
 | 
						|
	ci->ep0_dir = (type & USB_DIR_IN) ? TX : RX;
 | 
						|
 | 
						|
	switch (req.bRequest) {
 | 
						|
	case USB_REQ_CLEAR_FEATURE:
 | 
						|
		if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) &&
 | 
						|
				le16_to_cpu(req.wValue) ==
 | 
						|
				USB_ENDPOINT_HALT) {
 | 
						|
			if (req.wLength != 0)
 | 
						|
				break;
 | 
						|
			num  = le16_to_cpu(req.wIndex);
 | 
						|
			dir = num & USB_ENDPOINT_DIR_MASK;
 | 
						|
			num &= USB_ENDPOINT_NUMBER_MASK;
 | 
						|
			if (dir) /* TX */
 | 
						|
				num += ci->hw_ep_max / 2;
 | 
						|
			if (!ci->ci_hw_ep[num].wedge) {
 | 
						|
				spin_unlock(&ci->lock);
 | 
						|
				err = usb_ep_clear_halt(
 | 
						|
					&ci->ci_hw_ep[num].ep);
 | 
						|
				spin_lock(&ci->lock);
 | 
						|
				if (err)
 | 
						|
					break;
 | 
						|
			}
 | 
						|
			err = isr_setup_status_phase(ci);
 | 
						|
		} else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE) &&
 | 
						|
				le16_to_cpu(req.wValue) ==
 | 
						|
				USB_DEVICE_REMOTE_WAKEUP) {
 | 
						|
			if (req.wLength != 0)
 | 
						|
				break;
 | 
						|
			ci->remote_wakeup = 0;
 | 
						|
			err = isr_setup_status_phase(ci);
 | 
						|
		} else {
 | 
						|
			goto delegate;
 | 
						|
		}
 | 
						|
		break;
 | 
						|
	case USB_REQ_GET_STATUS:
 | 
						|
		if (type != (USB_DIR_IN|USB_RECIP_DEVICE)   &&
 | 
						|
		    type != (USB_DIR_IN|USB_RECIP_ENDPOINT) &&
 | 
						|
		    type != (USB_DIR_IN|USB_RECIP_INTERFACE))
 | 
						|
			goto delegate;
 | 
						|
		if (le16_to_cpu(req.wLength) != 2 ||
 | 
						|
		    le16_to_cpu(req.wValue)  != 0)
 | 
						|
			break;
 | 
						|
		err = isr_get_status_response(ci, &req);
 | 
						|
		break;
 | 
						|
	case USB_REQ_SET_ADDRESS:
 | 
						|
		if (type != (USB_DIR_OUT|USB_RECIP_DEVICE))
 | 
						|
			goto delegate;
 | 
						|
		if (le16_to_cpu(req.wLength) != 0 ||
 | 
						|
		    le16_to_cpu(req.wIndex)  != 0)
 | 
						|
			break;
 | 
						|
		ci->address = (u8)le16_to_cpu(req.wValue);
 | 
						|
		ci->setaddr = true;
 | 
						|
		err = isr_setup_status_phase(ci);
 | 
						|
		break;
 | 
						|
	case USB_REQ_SET_FEATURE:
 | 
						|
		if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) &&
 | 
						|
				le16_to_cpu(req.wValue) ==
 | 
						|
				USB_ENDPOINT_HALT) {
 | 
						|
			if (req.wLength != 0)
 | 
						|
				break;
 | 
						|
			num  = le16_to_cpu(req.wIndex);
 | 
						|
			dir = num & USB_ENDPOINT_DIR_MASK;
 | 
						|
			num &= USB_ENDPOINT_NUMBER_MASK;
 | 
						|
			if (dir) /* TX */
 | 
						|
				num += ci->hw_ep_max / 2;
 | 
						|
 | 
						|
			spin_unlock(&ci->lock);
 | 
						|
			err = usb_ep_set_halt(&ci->ci_hw_ep[num].ep);
 | 
						|
			spin_lock(&ci->lock);
 | 
						|
			if (!err)
 | 
						|
				isr_setup_status_phase(ci);
 | 
						|
		} else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE)) {
 | 
						|
			if (req.wLength != 0)
 | 
						|
				break;
 | 
						|
			switch (le16_to_cpu(req.wValue)) {
 | 
						|
			case USB_DEVICE_REMOTE_WAKEUP:
 | 
						|
				ci->remote_wakeup = 1;
 | 
						|
				err = isr_setup_status_phase(ci);
 | 
						|
				break;
 | 
						|
			case USB_DEVICE_TEST_MODE:
 | 
						|
				tmode = le16_to_cpu(req.wIndex) >> 8;
 | 
						|
				switch (tmode) {
 | 
						|
				case TEST_J:
 | 
						|
				case TEST_K:
 | 
						|
				case TEST_SE0_NAK:
 | 
						|
				case TEST_PACKET:
 | 
						|
				case TEST_FORCE_EN:
 | 
						|
					ci->test_mode = tmode;
 | 
						|
					err = isr_setup_status_phase(
 | 
						|
							ci);
 | 
						|
					break;
 | 
						|
				default:
 | 
						|
					break;
 | 
						|
				}
 | 
						|
				break;
 | 
						|
			case USB_DEVICE_B_HNP_ENABLE:
 | 
						|
				if (ci_otg_is_fsm_mode(ci)) {
 | 
						|
					ci->gadget.b_hnp_enable = 1;
 | 
						|
					err = isr_setup_status_phase(
 | 
						|
							ci);
 | 
						|
				}
 | 
						|
				break;
 | 
						|
			default:
 | 
						|
				goto delegate;
 | 
						|
			}
 | 
						|
		} else {
 | 
						|
			goto delegate;
 | 
						|
		}
 | 
						|
		break;
 | 
						|
	default:
 | 
						|
delegate:
 | 
						|
		if (req.wLength == 0)   /* no data phase */
 | 
						|
			ci->ep0_dir = TX;
 | 
						|
 | 
						|
		spin_unlock(&ci->lock);
 | 
						|
		err = ci->driver->setup(&ci->gadget, &req);
 | 
						|
		spin_lock(&ci->lock);
 | 
						|
		break;
 | 
						|
	}
 | 
						|
 | 
						|
	if (err < 0) {
 | 
						|
		spin_unlock(&ci->lock);
 | 
						|
		if (usb_ep_set_halt(&hwep->ep))
 | 
						|
			dev_err(ci->dev, "error: ep_set_halt\n");
 | 
						|
		spin_lock(&ci->lock);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * isr_tr_complete_handler: transaction complete interrupt handler
 | 
						|
 * @ci: UDC descriptor
 | 
						|
 *
 | 
						|
 * This function handles traffic events
 | 
						|
 */
 | 
						|
static void isr_tr_complete_handler(struct ci_hdrc *ci)
 | 
						|
__releases(ci->lock)
 | 
						|
__acquires(ci->lock)
 | 
						|
{
 | 
						|
	unsigned i;
 | 
						|
	int err;
 | 
						|
 | 
						|
	for (i = 0; i < ci->hw_ep_max; i++) {
 | 
						|
		struct ci_hw_ep *hwep  = &ci->ci_hw_ep[i];
 | 
						|
 | 
						|
		if (hwep->ep.desc == NULL)
 | 
						|
			continue;   /* not configured */
 | 
						|
 | 
						|
		if (hw_test_and_clear_complete(ci, i)) {
 | 
						|
			err = isr_tr_complete_low(hwep);
 | 
						|
			if (hwep->type == USB_ENDPOINT_XFER_CONTROL) {
 | 
						|
				if (err > 0)   /* needs status phase */
 | 
						|
					err = isr_setup_status_phase(ci);
 | 
						|
				if (err < 0) {
 | 
						|
					spin_unlock(&ci->lock);
 | 
						|
					if (usb_ep_set_halt(&hwep->ep))
 | 
						|
						dev_err(ci->dev,
 | 
						|
							"error: ep_set_halt\n");
 | 
						|
					spin_lock(&ci->lock);
 | 
						|
				}
 | 
						|
			}
 | 
						|
		}
 | 
						|
 | 
						|
		/* Only handle setup packet below */
 | 
						|
		if (i == 0 &&
 | 
						|
			hw_test_and_clear(ci, OP_ENDPTSETUPSTAT, BIT(0)))
 | 
						|
			isr_setup_packet_handler(ci);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
/******************************************************************************
 | 
						|
 * ENDPT block
 | 
						|
 *****************************************************************************/
 | 
						|
/**
 | 
						|
 * ep_enable: configure endpoint, making it usable
 | 
						|
 *
 | 
						|
 * Check usb_ep_enable() at "usb_gadget.h" for details
 | 
						|
 */
 | 
						|
static int ep_enable(struct usb_ep *ep,
 | 
						|
		     const struct usb_endpoint_descriptor *desc)
 | 
						|
{
 | 
						|
	struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
 | 
						|
	int retval = 0;
 | 
						|
	unsigned long flags;
 | 
						|
	u32 cap = 0;
 | 
						|
 | 
						|
	if (ep == NULL || desc == NULL)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	spin_lock_irqsave(hwep->lock, flags);
 | 
						|
 | 
						|
	/* only internal SW should enable ctrl endpts */
 | 
						|
 | 
						|
	hwep->ep.desc = desc;
 | 
						|
 | 
						|
	if (!list_empty(&hwep->qh.queue))
 | 
						|
		dev_warn(hwep->ci->dev, "enabling a non-empty endpoint!\n");
 | 
						|
 | 
						|
	hwep->dir  = usb_endpoint_dir_in(desc) ? TX : RX;
 | 
						|
	hwep->num  = usb_endpoint_num(desc);
 | 
						|
	hwep->type = usb_endpoint_type(desc);
 | 
						|
 | 
						|
	hwep->ep.maxpacket = usb_endpoint_maxp(desc) & 0x07ff;
 | 
						|
	hwep->ep.mult = QH_ISO_MULT(usb_endpoint_maxp(desc));
 | 
						|
 | 
						|
	if (hwep->type == USB_ENDPOINT_XFER_CONTROL)
 | 
						|
		cap |= QH_IOS;
 | 
						|
 | 
						|
	cap |= QH_ZLT;
 | 
						|
	cap |= (hwep->ep.maxpacket << __ffs(QH_MAX_PKT)) & QH_MAX_PKT;
 | 
						|
	/*
 | 
						|
	 * For ISO-TX, we set mult at QH as the largest value, and use
 | 
						|
	 * MultO at TD as real mult value.
 | 
						|
	 */
 | 
						|
	if (hwep->type == USB_ENDPOINT_XFER_ISOC && hwep->dir == TX)
 | 
						|
		cap |= 3 << __ffs(QH_MULT);
 | 
						|
 | 
						|
	hwep->qh.ptr->cap = cpu_to_le32(cap);
 | 
						|
 | 
						|
	hwep->qh.ptr->td.next |= cpu_to_le32(TD_TERMINATE);   /* needed? */
 | 
						|
 | 
						|
	if (hwep->num != 0 && hwep->type == USB_ENDPOINT_XFER_CONTROL) {
 | 
						|
		dev_err(hwep->ci->dev, "Set control xfer at non-ep0\n");
 | 
						|
		retval = -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	/*
 | 
						|
	 * Enable endpoints in the HW other than ep0 as ep0
 | 
						|
	 * is always enabled
 | 
						|
	 */
 | 
						|
	if (hwep->num)
 | 
						|
		retval |= hw_ep_enable(hwep->ci, hwep->num, hwep->dir,
 | 
						|
				       hwep->type);
 | 
						|
 | 
						|
	spin_unlock_irqrestore(hwep->lock, flags);
 | 
						|
	return retval;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * ep_disable: endpoint is no longer usable
 | 
						|
 *
 | 
						|
 * Check usb_ep_disable() at "usb_gadget.h" for details
 | 
						|
 */
 | 
						|
static int ep_disable(struct usb_ep *ep)
 | 
						|
{
 | 
						|
	struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
 | 
						|
	int direction, retval = 0;
 | 
						|
	unsigned long flags;
 | 
						|
 | 
						|
	if (ep == NULL)
 | 
						|
		return -EINVAL;
 | 
						|
	else if (hwep->ep.desc == NULL)
 | 
						|
		return -EBUSY;
 | 
						|
 | 
						|
	spin_lock_irqsave(hwep->lock, flags);
 | 
						|
 | 
						|
	/* only internal SW should disable ctrl endpts */
 | 
						|
 | 
						|
	direction = hwep->dir;
 | 
						|
	do {
 | 
						|
		retval |= _ep_nuke(hwep);
 | 
						|
		retval |= hw_ep_disable(hwep->ci, hwep->num, hwep->dir);
 | 
						|
 | 
						|
		if (hwep->type == USB_ENDPOINT_XFER_CONTROL)
 | 
						|
			hwep->dir = (hwep->dir == TX) ? RX : TX;
 | 
						|
 | 
						|
	} while (hwep->dir != direction);
 | 
						|
 | 
						|
	hwep->ep.desc = NULL;
 | 
						|
 | 
						|
	spin_unlock_irqrestore(hwep->lock, flags);
 | 
						|
	return retval;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * ep_alloc_request: allocate a request object to use with this endpoint
 | 
						|
 *
 | 
						|
 * Check usb_ep_alloc_request() at "usb_gadget.h" for details
 | 
						|
 */
 | 
						|
static struct usb_request *ep_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
 | 
						|
{
 | 
						|
	struct ci_hw_req *hwreq = NULL;
 | 
						|
 | 
						|
	if (ep == NULL)
 | 
						|
		return NULL;
 | 
						|
 | 
						|
	hwreq = kzalloc(sizeof(struct ci_hw_req), gfp_flags);
 | 
						|
	if (hwreq != NULL) {
 | 
						|
		INIT_LIST_HEAD(&hwreq->queue);
 | 
						|
		INIT_LIST_HEAD(&hwreq->tds);
 | 
						|
	}
 | 
						|
 | 
						|
	return (hwreq == NULL) ? NULL : &hwreq->req;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * ep_free_request: frees a request object
 | 
						|
 *
 | 
						|
 * Check usb_ep_free_request() at "usb_gadget.h" for details
 | 
						|
 */
 | 
						|
static void ep_free_request(struct usb_ep *ep, struct usb_request *req)
 | 
						|
{
 | 
						|
	struct ci_hw_ep  *hwep  = container_of(ep,  struct ci_hw_ep, ep);
 | 
						|
	struct ci_hw_req *hwreq = container_of(req, struct ci_hw_req, req);
 | 
						|
	struct td_node *node, *tmpnode;
 | 
						|
	unsigned long flags;
 | 
						|
 | 
						|
	if (ep == NULL || req == NULL) {
 | 
						|
		return;
 | 
						|
	} else if (!list_empty(&hwreq->queue)) {
 | 
						|
		dev_err(hwep->ci->dev, "freeing queued request\n");
 | 
						|
		return;
 | 
						|
	}
 | 
						|
 | 
						|
	spin_lock_irqsave(hwep->lock, flags);
 | 
						|
 | 
						|
	list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) {
 | 
						|
		dma_pool_free(hwep->td_pool, node->ptr, node->dma);
 | 
						|
		list_del_init(&node->td);
 | 
						|
		node->ptr = NULL;
 | 
						|
		kfree(node);
 | 
						|
	}
 | 
						|
 | 
						|
	kfree(hwreq);
 | 
						|
 | 
						|
	spin_unlock_irqrestore(hwep->lock, flags);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * ep_queue: queues (submits) an I/O request to an endpoint
 | 
						|
 *
 | 
						|
 * Check usb_ep_queue()* at usb_gadget.h" for details
 | 
						|
 */
 | 
						|
static int ep_queue(struct usb_ep *ep, struct usb_request *req,
 | 
						|
		    gfp_t __maybe_unused gfp_flags)
 | 
						|
{
 | 
						|
	struct ci_hw_ep  *hwep  = container_of(ep,  struct ci_hw_ep, ep);
 | 
						|
	int retval = 0;
 | 
						|
	unsigned long flags;
 | 
						|
 | 
						|
	if (ep == NULL || req == NULL || hwep->ep.desc == NULL)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	spin_lock_irqsave(hwep->lock, flags);
 | 
						|
	retval = _ep_queue(ep, req, gfp_flags);
 | 
						|
	spin_unlock_irqrestore(hwep->lock, flags);
 | 
						|
	return retval;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * ep_dequeue: dequeues (cancels, unlinks) an I/O request from an endpoint
 | 
						|
 *
 | 
						|
 * Check usb_ep_dequeue() at "usb_gadget.h" for details
 | 
						|
 */
 | 
						|
static int ep_dequeue(struct usb_ep *ep, struct usb_request *req)
 | 
						|
{
 | 
						|
	struct ci_hw_ep  *hwep  = container_of(ep,  struct ci_hw_ep, ep);
 | 
						|
	struct ci_hw_req *hwreq = container_of(req, struct ci_hw_req, req);
 | 
						|
	unsigned long flags;
 | 
						|
	struct td_node *node, *tmpnode;
 | 
						|
 | 
						|
	if (ep == NULL || req == NULL || hwreq->req.status != -EALREADY ||
 | 
						|
		hwep->ep.desc == NULL || list_empty(&hwreq->queue) ||
 | 
						|
		list_empty(&hwep->qh.queue))
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	spin_lock_irqsave(hwep->lock, flags);
 | 
						|
 | 
						|
	hw_ep_flush(hwep->ci, hwep->num, hwep->dir);
 | 
						|
 | 
						|
	list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) {
 | 
						|
		dma_pool_free(hwep->td_pool, node->ptr, node->dma);
 | 
						|
		list_del(&node->td);
 | 
						|
		kfree(node);
 | 
						|
	}
 | 
						|
 | 
						|
	/* pop request */
 | 
						|
	list_del_init(&hwreq->queue);
 | 
						|
 | 
						|
	usb_gadget_unmap_request(&hwep->ci->gadget, req, hwep->dir);
 | 
						|
 | 
						|
	req->status = -ECONNRESET;
 | 
						|
 | 
						|
	if (hwreq->req.complete != NULL) {
 | 
						|
		spin_unlock(hwep->lock);
 | 
						|
		usb_gadget_giveback_request(&hwep->ep, &hwreq->req);
 | 
						|
		spin_lock(hwep->lock);
 | 
						|
	}
 | 
						|
 | 
						|
	spin_unlock_irqrestore(hwep->lock, flags);
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * ep_set_halt: sets the endpoint halt feature
 | 
						|
 *
 | 
						|
 * Check usb_ep_set_halt() at "usb_gadget.h" for details
 | 
						|
 */
 | 
						|
static int ep_set_halt(struct usb_ep *ep, int value)
 | 
						|
{
 | 
						|
	struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
 | 
						|
	int direction, retval = 0;
 | 
						|
	unsigned long flags;
 | 
						|
 | 
						|
	if (ep == NULL || hwep->ep.desc == NULL)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	if (usb_endpoint_xfer_isoc(hwep->ep.desc))
 | 
						|
		return -EOPNOTSUPP;
 | 
						|
 | 
						|
	spin_lock_irqsave(hwep->lock, flags);
 | 
						|
 | 
						|
#ifndef STALL_IN
 | 
						|
	/* g_file_storage MS compliant but g_zero fails chapter 9 compliance */
 | 
						|
	if (value && hwep->type == USB_ENDPOINT_XFER_BULK && hwep->dir == TX &&
 | 
						|
	    !list_empty(&hwep->qh.queue)) {
 | 
						|
		spin_unlock_irqrestore(hwep->lock, flags);
 | 
						|
		return -EAGAIN;
 | 
						|
	}
 | 
						|
#endif
 | 
						|
 | 
						|
	direction = hwep->dir;
 | 
						|
	do {
 | 
						|
		retval |= hw_ep_set_halt(hwep->ci, hwep->num, hwep->dir, value);
 | 
						|
 | 
						|
		if (!value)
 | 
						|
			hwep->wedge = 0;
 | 
						|
 | 
						|
		if (hwep->type == USB_ENDPOINT_XFER_CONTROL)
 | 
						|
			hwep->dir = (hwep->dir == TX) ? RX : TX;
 | 
						|
 | 
						|
	} while (hwep->dir != direction);
 | 
						|
 | 
						|
	spin_unlock_irqrestore(hwep->lock, flags);
 | 
						|
	return retval;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * ep_set_wedge: sets the halt feature and ignores clear requests
 | 
						|
 *
 | 
						|
 * Check usb_ep_set_wedge() at "usb_gadget.h" for details
 | 
						|
 */
 | 
						|
static int ep_set_wedge(struct usb_ep *ep)
 | 
						|
{
 | 
						|
	struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
 | 
						|
	unsigned long flags;
 | 
						|
 | 
						|
	if (ep == NULL || hwep->ep.desc == NULL)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	spin_lock_irqsave(hwep->lock, flags);
 | 
						|
	hwep->wedge = 1;
 | 
						|
	spin_unlock_irqrestore(hwep->lock, flags);
 | 
						|
 | 
						|
	return usb_ep_set_halt(ep);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * ep_fifo_flush: flushes contents of a fifo
 | 
						|
 *
 | 
						|
 * Check usb_ep_fifo_flush() at "usb_gadget.h" for details
 | 
						|
 */
 | 
						|
static void ep_fifo_flush(struct usb_ep *ep)
 | 
						|
{
 | 
						|
	struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
 | 
						|
	unsigned long flags;
 | 
						|
 | 
						|
	if (ep == NULL) {
 | 
						|
		dev_err(hwep->ci->dev, "%02X: -EINVAL\n", _usb_addr(hwep));
 | 
						|
		return;
 | 
						|
	}
 | 
						|
 | 
						|
	spin_lock_irqsave(hwep->lock, flags);
 | 
						|
 | 
						|
	hw_ep_flush(hwep->ci, hwep->num, hwep->dir);
 | 
						|
 | 
						|
	spin_unlock_irqrestore(hwep->lock, flags);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * Endpoint-specific part of the API to the USB controller hardware
 | 
						|
 * Check "usb_gadget.h" for details
 | 
						|
 */
 | 
						|
static const struct usb_ep_ops usb_ep_ops = {
 | 
						|
	.enable	       = ep_enable,
 | 
						|
	.disable       = ep_disable,
 | 
						|
	.alloc_request = ep_alloc_request,
 | 
						|
	.free_request  = ep_free_request,
 | 
						|
	.queue	       = ep_queue,
 | 
						|
	.dequeue       = ep_dequeue,
 | 
						|
	.set_halt      = ep_set_halt,
 | 
						|
	.set_wedge     = ep_set_wedge,
 | 
						|
	.fifo_flush    = ep_fifo_flush,
 | 
						|
};
 | 
						|
 | 
						|
/******************************************************************************
 | 
						|
 * GADGET block
 | 
						|
 *****************************************************************************/
 | 
						|
static int ci_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
 | 
						|
{
 | 
						|
	struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
 | 
						|
	unsigned long flags;
 | 
						|
	int gadget_ready = 0;
 | 
						|
 | 
						|
	spin_lock_irqsave(&ci->lock, flags);
 | 
						|
	ci->vbus_active = is_active;
 | 
						|
	if (ci->driver)
 | 
						|
		gadget_ready = 1;
 | 
						|
	spin_unlock_irqrestore(&ci->lock, flags);
 | 
						|
 | 
						|
	if (gadget_ready) {
 | 
						|
		if (is_active) {
 | 
						|
			pm_runtime_get_sync(&_gadget->dev);
 | 
						|
			hw_device_reset(ci);
 | 
						|
			hw_device_state(ci, ci->ep0out->qh.dma);
 | 
						|
			usb_gadget_set_state(_gadget, USB_STATE_POWERED);
 | 
						|
		} else {
 | 
						|
			if (ci->driver)
 | 
						|
				ci->driver->disconnect(&ci->gadget);
 | 
						|
			hw_device_state(ci, 0);
 | 
						|
			if (ci->platdata->notify_event)
 | 
						|
				ci->platdata->notify_event(ci,
 | 
						|
				CI_HDRC_CONTROLLER_STOPPED_EVENT);
 | 
						|
			_gadget_stop_activity(&ci->gadget);
 | 
						|
			pm_runtime_put_sync(&_gadget->dev);
 | 
						|
			usb_gadget_set_state(_gadget, USB_STATE_NOTATTACHED);
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int ci_udc_wakeup(struct usb_gadget *_gadget)
 | 
						|
{
 | 
						|
	struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
 | 
						|
	unsigned long flags;
 | 
						|
	int ret = 0;
 | 
						|
 | 
						|
	spin_lock_irqsave(&ci->lock, flags);
 | 
						|
	if (!ci->remote_wakeup) {
 | 
						|
		ret = -EOPNOTSUPP;
 | 
						|
		goto out;
 | 
						|
	}
 | 
						|
	if (!hw_read(ci, OP_PORTSC, PORTSC_SUSP)) {
 | 
						|
		ret = -EINVAL;
 | 
						|
		goto out;
 | 
						|
	}
 | 
						|
	hw_write(ci, OP_PORTSC, PORTSC_FPR, PORTSC_FPR);
 | 
						|
out:
 | 
						|
	spin_unlock_irqrestore(&ci->lock, flags);
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int ci_udc_vbus_draw(struct usb_gadget *_gadget, unsigned ma)
 | 
						|
{
 | 
						|
	struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
 | 
						|
 | 
						|
	if (ci->usb_phy)
 | 
						|
		return usb_phy_set_power(ci->usb_phy, ma);
 | 
						|
	return -ENOTSUPP;
 | 
						|
}
 | 
						|
 | 
						|
static int ci_udc_selfpowered(struct usb_gadget *_gadget, int is_on)
 | 
						|
{
 | 
						|
	struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
 | 
						|
	struct ci_hw_ep *hwep = ci->ep0in;
 | 
						|
	unsigned long flags;
 | 
						|
 | 
						|
	spin_lock_irqsave(hwep->lock, flags);
 | 
						|
	_gadget->is_selfpowered = (is_on != 0);
 | 
						|
	spin_unlock_irqrestore(hwep->lock, flags);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
/* Change Data+ pullup status
 | 
						|
 * this func is used by usb_gadget_connect/disconnet
 | 
						|
 */
 | 
						|
static int ci_udc_pullup(struct usb_gadget *_gadget, int is_on)
 | 
						|
{
 | 
						|
	struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
 | 
						|
 | 
						|
	if (!ci->vbus_active)
 | 
						|
		return -EOPNOTSUPP;
 | 
						|
 | 
						|
	if (is_on)
 | 
						|
		hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS);
 | 
						|
	else
 | 
						|
		hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int ci_udc_start(struct usb_gadget *gadget,
 | 
						|
			 struct usb_gadget_driver *driver);
 | 
						|
static int ci_udc_stop(struct usb_gadget *gadget);
 | 
						|
/**
 | 
						|
 * Device operations part of the API to the USB controller hardware,
 | 
						|
 * which don't involve endpoints (or i/o)
 | 
						|
 * Check  "usb_gadget.h" for details
 | 
						|
 */
 | 
						|
static const struct usb_gadget_ops usb_gadget_ops = {
 | 
						|
	.vbus_session	= ci_udc_vbus_session,
 | 
						|
	.wakeup		= ci_udc_wakeup,
 | 
						|
	.set_selfpowered	= ci_udc_selfpowered,
 | 
						|
	.pullup		= ci_udc_pullup,
 | 
						|
	.vbus_draw	= ci_udc_vbus_draw,
 | 
						|
	.udc_start	= ci_udc_start,
 | 
						|
	.udc_stop	= ci_udc_stop,
 | 
						|
};
 | 
						|
 | 
						|
static int init_eps(struct ci_hdrc *ci)
 | 
						|
{
 | 
						|
	int retval = 0, i, j;
 | 
						|
 | 
						|
	for (i = 0; i < ci->hw_ep_max/2; i++)
 | 
						|
		for (j = RX; j <= TX; j++) {
 | 
						|
			int k = i + j * ci->hw_ep_max/2;
 | 
						|
			struct ci_hw_ep *hwep = &ci->ci_hw_ep[k];
 | 
						|
 | 
						|
			scnprintf(hwep->name, sizeof(hwep->name), "ep%i%s", i,
 | 
						|
					(j == TX)  ? "in" : "out");
 | 
						|
 | 
						|
			hwep->ci          = ci;
 | 
						|
			hwep->lock         = &ci->lock;
 | 
						|
			hwep->td_pool      = ci->td_pool;
 | 
						|
 | 
						|
			hwep->ep.name      = hwep->name;
 | 
						|
			hwep->ep.ops       = &usb_ep_ops;
 | 
						|
			/*
 | 
						|
			 * for ep0: maxP defined in desc, for other
 | 
						|
			 * eps, maxP is set by epautoconfig() called
 | 
						|
			 * by gadget layer
 | 
						|
			 */
 | 
						|
			usb_ep_set_maxpacket_limit(&hwep->ep, (unsigned short)~0);
 | 
						|
 | 
						|
			INIT_LIST_HEAD(&hwep->qh.queue);
 | 
						|
			hwep->qh.ptr = dma_pool_alloc(ci->qh_pool, GFP_KERNEL,
 | 
						|
						     &hwep->qh.dma);
 | 
						|
			if (hwep->qh.ptr == NULL)
 | 
						|
				retval = -ENOMEM;
 | 
						|
			else
 | 
						|
				memset(hwep->qh.ptr, 0, sizeof(*hwep->qh.ptr));
 | 
						|
 | 
						|
			/*
 | 
						|
			 * set up shorthands for ep0 out and in endpoints,
 | 
						|
			 * don't add to gadget's ep_list
 | 
						|
			 */
 | 
						|
			if (i == 0) {
 | 
						|
				if (j == RX)
 | 
						|
					ci->ep0out = hwep;
 | 
						|
				else
 | 
						|
					ci->ep0in = hwep;
 | 
						|
 | 
						|
				usb_ep_set_maxpacket_limit(&hwep->ep, CTRL_PAYLOAD_MAX);
 | 
						|
				continue;
 | 
						|
			}
 | 
						|
 | 
						|
			list_add_tail(&hwep->ep.ep_list, &ci->gadget.ep_list);
 | 
						|
		}
 | 
						|
 | 
						|
	return retval;
 | 
						|
}
 | 
						|
 | 
						|
static void destroy_eps(struct ci_hdrc *ci)
 | 
						|
{
 | 
						|
	int i;
 | 
						|
 | 
						|
	for (i = 0; i < ci->hw_ep_max; i++) {
 | 
						|
		struct ci_hw_ep *hwep = &ci->ci_hw_ep[i];
 | 
						|
 | 
						|
		if (hwep->pending_td)
 | 
						|
			free_pending_td(hwep);
 | 
						|
		dma_pool_free(ci->qh_pool, hwep->qh.ptr, hwep->qh.dma);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * ci_udc_start: register a gadget driver
 | 
						|
 * @gadget: our gadget
 | 
						|
 * @driver: the driver being registered
 | 
						|
 *
 | 
						|
 * Interrupts are enabled here.
 | 
						|
 */
 | 
						|
static int ci_udc_start(struct usb_gadget *gadget,
 | 
						|
			 struct usb_gadget_driver *driver)
 | 
						|
{
 | 
						|
	struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget);
 | 
						|
	unsigned long flags;
 | 
						|
	int retval = -ENOMEM;
 | 
						|
 | 
						|
	if (driver->disconnect == NULL)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
 | 
						|
	ci->ep0out->ep.desc = &ctrl_endpt_out_desc;
 | 
						|
	retval = usb_ep_enable(&ci->ep0out->ep);
 | 
						|
	if (retval)
 | 
						|
		return retval;
 | 
						|
 | 
						|
	ci->ep0in->ep.desc = &ctrl_endpt_in_desc;
 | 
						|
	retval = usb_ep_enable(&ci->ep0in->ep);
 | 
						|
	if (retval)
 | 
						|
		return retval;
 | 
						|
 | 
						|
	ci->driver = driver;
 | 
						|
 | 
						|
	/* Start otg fsm for B-device */
 | 
						|
	if (ci_otg_is_fsm_mode(ci) && ci->fsm.id) {
 | 
						|
		ci_hdrc_otg_fsm_start(ci);
 | 
						|
		return retval;
 | 
						|
	}
 | 
						|
 | 
						|
	pm_runtime_get_sync(&ci->gadget.dev);
 | 
						|
	if (ci->vbus_active) {
 | 
						|
		spin_lock_irqsave(&ci->lock, flags);
 | 
						|
		hw_device_reset(ci);
 | 
						|
	} else {
 | 
						|
		pm_runtime_put_sync(&ci->gadget.dev);
 | 
						|
		return retval;
 | 
						|
	}
 | 
						|
 | 
						|
	retval = hw_device_state(ci, ci->ep0out->qh.dma);
 | 
						|
	spin_unlock_irqrestore(&ci->lock, flags);
 | 
						|
	if (retval)
 | 
						|
		pm_runtime_put_sync(&ci->gadget.dev);
 | 
						|
 | 
						|
	return retval;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * ci_udc_stop: unregister a gadget driver
 | 
						|
 */
 | 
						|
static int ci_udc_stop(struct usb_gadget *gadget)
 | 
						|
{
 | 
						|
	struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget);
 | 
						|
	unsigned long flags;
 | 
						|
 | 
						|
	spin_lock_irqsave(&ci->lock, flags);
 | 
						|
 | 
						|
	if (ci->vbus_active) {
 | 
						|
		hw_device_state(ci, 0);
 | 
						|
		if (ci->platdata->notify_event)
 | 
						|
			ci->platdata->notify_event(ci,
 | 
						|
			CI_HDRC_CONTROLLER_STOPPED_EVENT);
 | 
						|
		spin_unlock_irqrestore(&ci->lock, flags);
 | 
						|
		_gadget_stop_activity(&ci->gadget);
 | 
						|
		spin_lock_irqsave(&ci->lock, flags);
 | 
						|
		pm_runtime_put(&ci->gadget.dev);
 | 
						|
	}
 | 
						|
 | 
						|
	ci->driver = NULL;
 | 
						|
	spin_unlock_irqrestore(&ci->lock, flags);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
/******************************************************************************
 | 
						|
 * BUS block
 | 
						|
 *****************************************************************************/
 | 
						|
/**
 | 
						|
 * udc_irq: ci interrupt handler
 | 
						|
 *
 | 
						|
 * This function returns IRQ_HANDLED if the IRQ has been handled
 | 
						|
 * It locks access to registers
 | 
						|
 */
 | 
						|
static irqreturn_t udc_irq(struct ci_hdrc *ci)
 | 
						|
{
 | 
						|
	irqreturn_t retval;
 | 
						|
	u32 intr;
 | 
						|
 | 
						|
	if (ci == NULL)
 | 
						|
		return IRQ_HANDLED;
 | 
						|
 | 
						|
	spin_lock(&ci->lock);
 | 
						|
 | 
						|
	if (ci->platdata->flags & CI_HDRC_REGS_SHARED) {
 | 
						|
		if (hw_read(ci, OP_USBMODE, USBMODE_CM) !=
 | 
						|
				USBMODE_CM_DC) {
 | 
						|
			spin_unlock(&ci->lock);
 | 
						|
			return IRQ_NONE;
 | 
						|
		}
 | 
						|
	}
 | 
						|
	intr = hw_test_and_clear_intr_active(ci);
 | 
						|
 | 
						|
	if (intr) {
 | 
						|
		/* order defines priority - do NOT change it */
 | 
						|
		if (USBi_URI & intr)
 | 
						|
			isr_reset_handler(ci);
 | 
						|
 | 
						|
		if (USBi_PCI & intr) {
 | 
						|
			ci->gadget.speed = hw_port_is_high_speed(ci) ?
 | 
						|
				USB_SPEED_HIGH : USB_SPEED_FULL;
 | 
						|
			if (ci->suspended && ci->driver->resume) {
 | 
						|
				spin_unlock(&ci->lock);
 | 
						|
				ci->driver->resume(&ci->gadget);
 | 
						|
				spin_lock(&ci->lock);
 | 
						|
				ci->suspended = 0;
 | 
						|
			}
 | 
						|
		}
 | 
						|
 | 
						|
		if (USBi_UI  & intr)
 | 
						|
			isr_tr_complete_handler(ci);
 | 
						|
 | 
						|
		if (USBi_SLI & intr) {
 | 
						|
			if (ci->gadget.speed != USB_SPEED_UNKNOWN &&
 | 
						|
			    ci->driver->suspend) {
 | 
						|
				ci->suspended = 1;
 | 
						|
				spin_unlock(&ci->lock);
 | 
						|
				ci->driver->suspend(&ci->gadget);
 | 
						|
				usb_gadget_set_state(&ci->gadget,
 | 
						|
						USB_STATE_SUSPENDED);
 | 
						|
				spin_lock(&ci->lock);
 | 
						|
			}
 | 
						|
		}
 | 
						|
		retval = IRQ_HANDLED;
 | 
						|
	} else {
 | 
						|
		retval = IRQ_NONE;
 | 
						|
	}
 | 
						|
	spin_unlock(&ci->lock);
 | 
						|
 | 
						|
	return retval;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * udc_start: initialize gadget role
 | 
						|
 * @ci: chipidea controller
 | 
						|
 */
 | 
						|
static int udc_start(struct ci_hdrc *ci)
 | 
						|
{
 | 
						|
	struct device *dev = ci->dev;
 | 
						|
	int retval = 0;
 | 
						|
 | 
						|
	spin_lock_init(&ci->lock);
 | 
						|
 | 
						|
	ci->gadget.ops          = &usb_gadget_ops;
 | 
						|
	ci->gadget.speed        = USB_SPEED_UNKNOWN;
 | 
						|
	ci->gadget.max_speed    = USB_SPEED_HIGH;
 | 
						|
	ci->gadget.is_otg       = ci->is_otg ? 1 : 0;
 | 
						|
	ci->gadget.name         = ci->platdata->name;
 | 
						|
 | 
						|
	INIT_LIST_HEAD(&ci->gadget.ep_list);
 | 
						|
 | 
						|
	/* alloc resources */
 | 
						|
	ci->qh_pool = dma_pool_create("ci_hw_qh", dev,
 | 
						|
				       sizeof(struct ci_hw_qh),
 | 
						|
				       64, CI_HDRC_PAGE_SIZE);
 | 
						|
	if (ci->qh_pool == NULL)
 | 
						|
		return -ENOMEM;
 | 
						|
 | 
						|
	ci->td_pool = dma_pool_create("ci_hw_td", dev,
 | 
						|
				       sizeof(struct ci_hw_td),
 | 
						|
				       64, CI_HDRC_PAGE_SIZE);
 | 
						|
	if (ci->td_pool == NULL) {
 | 
						|
		retval = -ENOMEM;
 | 
						|
		goto free_qh_pool;
 | 
						|
	}
 | 
						|
 | 
						|
	retval = init_eps(ci);
 | 
						|
	if (retval)
 | 
						|
		goto free_pools;
 | 
						|
 | 
						|
	ci->gadget.ep0 = &ci->ep0in->ep;
 | 
						|
 | 
						|
	retval = usb_add_gadget_udc(dev, &ci->gadget);
 | 
						|
	if (retval)
 | 
						|
		goto destroy_eps;
 | 
						|
 | 
						|
	pm_runtime_no_callbacks(&ci->gadget.dev);
 | 
						|
	pm_runtime_enable(&ci->gadget.dev);
 | 
						|
 | 
						|
	return retval;
 | 
						|
 | 
						|
destroy_eps:
 | 
						|
	destroy_eps(ci);
 | 
						|
free_pools:
 | 
						|
	dma_pool_destroy(ci->td_pool);
 | 
						|
free_qh_pool:
 | 
						|
	dma_pool_destroy(ci->qh_pool);
 | 
						|
	return retval;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * ci_hdrc_gadget_destroy: parent remove must call this to remove UDC
 | 
						|
 *
 | 
						|
 * No interrupts active, the IRQ has been released
 | 
						|
 */
 | 
						|
void ci_hdrc_gadget_destroy(struct ci_hdrc *ci)
 | 
						|
{
 | 
						|
	if (!ci->roles[CI_ROLE_GADGET])
 | 
						|
		return;
 | 
						|
 | 
						|
	usb_del_gadget_udc(&ci->gadget);
 | 
						|
 | 
						|
	destroy_eps(ci);
 | 
						|
 | 
						|
	dma_pool_destroy(ci->td_pool);
 | 
						|
	dma_pool_destroy(ci->qh_pool);
 | 
						|
}
 | 
						|
 | 
						|
static int udc_id_switch_for_device(struct ci_hdrc *ci)
 | 
						|
{
 | 
						|
	if (ci->is_otg)
 | 
						|
		/* Clear and enable BSV irq */
 | 
						|
		hw_write_otgsc(ci, OTGSC_BSVIS | OTGSC_BSVIE,
 | 
						|
					OTGSC_BSVIS | OTGSC_BSVIE);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static void udc_id_switch_for_host(struct ci_hdrc *ci)
 | 
						|
{
 | 
						|
	/*
 | 
						|
	 * host doesn't care B_SESSION_VALID event
 | 
						|
	 * so clear and disbale BSV irq
 | 
						|
	 */
 | 
						|
	if (ci->is_otg)
 | 
						|
		hw_write_otgsc(ci, OTGSC_BSVIE | OTGSC_BSVIS, OTGSC_BSVIS);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * ci_hdrc_gadget_init - initialize device related bits
 | 
						|
 * ci: the controller
 | 
						|
 *
 | 
						|
 * This function initializes the gadget, if the device is "device capable".
 | 
						|
 */
 | 
						|
int ci_hdrc_gadget_init(struct ci_hdrc *ci)
 | 
						|
{
 | 
						|
	struct ci_role_driver *rdrv;
 | 
						|
 | 
						|
	if (!hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DC))
 | 
						|
		return -ENXIO;
 | 
						|
 | 
						|
	rdrv = devm_kzalloc(ci->dev, sizeof(struct ci_role_driver), GFP_KERNEL);
 | 
						|
	if (!rdrv)
 | 
						|
		return -ENOMEM;
 | 
						|
 | 
						|
	rdrv->start	= udc_id_switch_for_device;
 | 
						|
	rdrv->stop	= udc_id_switch_for_host;
 | 
						|
	rdrv->irq	= udc_irq;
 | 
						|
	rdrv->name	= "gadget";
 | 
						|
	ci->roles[CI_ROLE_GADGET] = rdrv;
 | 
						|
 | 
						|
	return udc_start(ci);
 | 
						|
}
 |