5a79859ae0
Remove the 31 bit support in order to reduce maintenance cost and
effectively remove dead code. Since a couple of years there is no
distribution left that comes with a 31 bit kernel.
The 31 bit kernel also has been broken since more than a year before
anybody noticed. In addition I added a removal warning to the kernel
shown at ipl for 5 minutes: a960062e58 ("s390: add 31 bit warning
message") which let everybody know about the plan to remove 31 bit
code. We didn't get any response.
Given that the last 31 bit only machine was introduced in 1999 let's
remove the code.
Anybody with 31 bit user space code can still use the compat mode.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
454 lines
12 KiB
ArmAsm
454 lines
12 KiB
ArmAsm
/*
|
|
* Copyright IBM Corp. 1999, 2010
|
|
*
|
|
* Author(s): Hartmut Penner <hp@de.ibm.com>
|
|
* Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
* Rob van der Heij <rvdhei@iae.nl>
|
|
* Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
*
|
|
* There are 5 different IPL methods
|
|
* 1) load the image directly into ram at address 0 and do an PSW restart
|
|
* 2) linload will load the image from address 0x10000 to memory 0x10000
|
|
* and start the code thru LPSW 0x0008000080010000 (VM only, deprecated)
|
|
* 3) generate the tape ipl header, store the generated image on a tape
|
|
* and ipl from it
|
|
* In case of SL tape you need to IPL 5 times to get past VOL1 etc
|
|
* 4) generate the vm reader ipl header, move the generated image to the
|
|
* VM reader (use option NOH!) and do a ipl from reader (VM only)
|
|
* 5) direct call of start by the SALIPL loader
|
|
* We use the cpuid to distinguish between VM and native ipl
|
|
* params for kernel are pushed to 0x10400 (see setup.h)
|
|
*
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/linkage.h>
|
|
#include <asm/asm-offsets.h>
|
|
#include <asm/thread_info.h>
|
|
#include <asm/page.h>
|
|
|
|
#define ARCH_OFFSET 4
|
|
|
|
__HEAD
|
|
|
|
#define IPL_BS 0x730
|
|
.org 0
|
|
.long 0x00080000,0x80000000+iplstart # The first 24 bytes are loaded
|
|
.long 0x02000018,0x60000050 # by ipl to addresses 0-23.
|
|
.long 0x02000068,0x60000050 # (a PSW and two CCWs).
|
|
.fill 80-24,1,0x40 # bytes 24-79 are discarded !!
|
|
.long 0x020000f0,0x60000050 # The next 160 byte are loaded
|
|
.long 0x02000140,0x60000050 # to addresses 0x18-0xb7
|
|
.long 0x02000190,0x60000050 # They form the continuation
|
|
.long 0x020001e0,0x60000050 # of the CCW program started
|
|
.long 0x02000230,0x60000050 # by ipl and load the range
|
|
.long 0x02000280,0x60000050 # 0x0f0-0x730 from the image
|
|
.long 0x020002d0,0x60000050 # to the range 0x0f0-0x730
|
|
.long 0x02000320,0x60000050 # in memory. At the end of
|
|
.long 0x02000370,0x60000050 # the channel program the PSW
|
|
.long 0x020003c0,0x60000050 # at location 0 is loaded.
|
|
.long 0x02000410,0x60000050 # Initial processing starts
|
|
.long 0x02000460,0x60000050 # at 0x200 = iplstart.
|
|
.long 0x020004b0,0x60000050
|
|
.long 0x02000500,0x60000050
|
|
.long 0x02000550,0x60000050
|
|
.long 0x020005a0,0x60000050
|
|
.long 0x020005f0,0x60000050
|
|
.long 0x02000640,0x60000050
|
|
.long 0x02000690,0x60000050
|
|
.long 0x020006e0,0x20000050
|
|
|
|
.org 0x200
|
|
#
|
|
# subroutine to set architecture mode
|
|
#
|
|
.Lsetmode:
|
|
mvi __LC_AR_MODE_ID,1 # set esame flag
|
|
slr %r0,%r0 # set cpuid to zero
|
|
lhi %r1,2 # mode 2 = esame (dump)
|
|
sigp %r1,%r0,0x12 # switch to esame mode
|
|
bras %r13,0f
|
|
.fill 16,4,0x0
|
|
0: lmh %r0,%r15,0(%r13) # clear high-order half of gprs
|
|
sam31 # switch to 31 bit addressing mode
|
|
br %r14
|
|
|
|
#
|
|
# subroutine to wait for end I/O
|
|
#
|
|
.Lirqwait:
|
|
mvc 0x1f0(16),.Lnewpsw # set up IO interrupt psw
|
|
lpsw .Lwaitpsw
|
|
.Lioint:
|
|
br %r14
|
|
.align 8
|
|
.Lnewpsw:
|
|
.quad 0x0000000080000000,.Lioint
|
|
.Lwaitpsw:
|
|
.long 0x020a0000,0x80000000+.Lioint
|
|
|
|
#
|
|
# subroutine for loading cards from the reader
|
|
#
|
|
.Lloader:
|
|
la %r4,0(%r14)
|
|
la %r3,.Lorb # r2 = address of orb into r2
|
|
la %r5,.Lirb # r4 = address of irb
|
|
la %r6,.Lccws
|
|
la %r7,20
|
|
.Linit:
|
|
st %r2,4(%r6) # initialize CCW data addresses
|
|
la %r2,0x50(%r2)
|
|
la %r6,8(%r6)
|
|
bct 7,.Linit
|
|
|
|
lctl %c6,%c6,.Lcr6 # set IO subclass mask
|
|
slr %r2,%r2
|
|
.Lldlp:
|
|
ssch 0(%r3) # load chunk of 1600 bytes
|
|
bnz .Llderr
|
|
.Lwait4irq:
|
|
bas %r14,.Lirqwait
|
|
c %r1,0xb8 # compare subchannel number
|
|
bne .Lwait4irq
|
|
tsch 0(%r5)
|
|
|
|
slr %r0,%r0
|
|
ic %r0,8(%r5) # get device status
|
|
chi %r0,8 # channel end ?
|
|
be .Lcont
|
|
chi %r0,12 # channel end + device end ?
|
|
be .Lcont
|
|
|
|
l %r0,4(%r5)
|
|
s %r0,8(%r3) # r0/8 = number of ccws executed
|
|
mhi %r0,10 # *10 = number of bytes in ccws
|
|
lh %r3,10(%r5) # get residual count
|
|
sr %r0,%r3 # #ccws*80-residual=#bytes read
|
|
ar %r2,%r0
|
|
|
|
br %r4 # r2 contains the total size
|
|
|
|
.Lcont:
|
|
ahi %r2,0x640 # add 0x640 to total size
|
|
la %r6,.Lccws
|
|
la %r7,20
|
|
.Lincr:
|
|
l %r0,4(%r6) # update CCW data addresses
|
|
ahi %r0,0x640
|
|
st %r0,4(%r6)
|
|
ahi %r6,8
|
|
bct 7,.Lincr
|
|
|
|
b .Lldlp
|
|
.Llderr:
|
|
lpsw .Lcrash
|
|
|
|
.align 8
|
|
.Lorb: .long 0x00000000,0x0080ff00,.Lccws
|
|
.Lirb: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
|
|
.Lcr6: .long 0xff000000
|
|
.Lloadp:.long 0,0
|
|
.align 8
|
|
.Lcrash:.long 0x000a0000,0x00000000
|
|
|
|
.align 8
|
|
.Lccws: .rept 19
|
|
.long 0x02600050,0x00000000
|
|
.endr
|
|
.long 0x02200050,0x00000000
|
|
|
|
iplstart:
|
|
bas %r14,.Lsetmode # Immediately switch to 64 bit mode
|
|
lh %r1,0xb8 # test if subchannel number
|
|
bct %r1,.Lnoload # is valid
|
|
l %r1,0xb8 # load ipl subchannel number
|
|
la %r2,IPL_BS # load start address
|
|
bas %r14,.Lloader # load rest of ipl image
|
|
l %r12,.Lparm # pointer to parameter area
|
|
st %r1,IPL_DEVICE+ARCH_OFFSET-PARMAREA(%r12) # save ipl device number
|
|
|
|
#
|
|
# load parameter file from ipl device
|
|
#
|
|
.Lagain1:
|
|
l %r2,.Linitrd # ramdisk loc. is temp
|
|
bas %r14,.Lloader # load parameter file
|
|
ltr %r2,%r2 # got anything ?
|
|
bz .Lnopf
|
|
chi %r2,895
|
|
bnh .Lnotrunc
|
|
la %r2,895
|
|
.Lnotrunc:
|
|
l %r4,.Linitrd
|
|
clc 0(3,%r4),.L_hdr # if it is HDRx
|
|
bz .Lagain1 # skip dataset header
|
|
clc 0(3,%r4),.L_eof # if it is EOFx
|
|
bz .Lagain1 # skip dateset trailer
|
|
la %r5,0(%r4,%r2)
|
|
lr %r3,%r2
|
|
la %r3,COMMAND_LINE-PARMAREA(%r12) # load adr. of command line
|
|
mvc 0(256,%r3),0(%r4)
|
|
mvc 256(256,%r3),256(%r4)
|
|
mvc 512(256,%r3),512(%r4)
|
|
mvc 768(122,%r3),768(%r4)
|
|
slr %r0,%r0
|
|
b .Lcntlp
|
|
.Ldelspc:
|
|
ic %r0,0(%r2,%r3)
|
|
chi %r0,0x20 # is it a space ?
|
|
be .Lcntlp
|
|
ahi %r2,1
|
|
b .Leolp
|
|
.Lcntlp:
|
|
brct %r2,.Ldelspc
|
|
.Leolp:
|
|
slr %r0,%r0
|
|
stc %r0,0(%r2,%r3) # terminate buffer
|
|
.Lnopf:
|
|
|
|
#
|
|
# load ramdisk from ipl device
|
|
#
|
|
.Lagain2:
|
|
l %r2,.Linitrd # addr of ramdisk
|
|
st %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12)
|
|
bas %r14,.Lloader # load ramdisk
|
|
st %r2,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r12) # store size of rd
|
|
ltr %r2,%r2
|
|
bnz .Lrdcont
|
|
st %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) # no ramdisk found
|
|
.Lrdcont:
|
|
l %r2,.Linitrd
|
|
|
|
clc 0(3,%r2),.L_hdr # skip HDRx and EOFx
|
|
bz .Lagain2
|
|
clc 0(3,%r2),.L_eof
|
|
bz .Lagain2
|
|
|
|
#
|
|
# reset files in VM reader
|
|
#
|
|
stidp .Lcpuid # store cpuid
|
|
tm .Lcpuid,0xff # running VM ?
|
|
bno .Lnoreset
|
|
la %r2,.Lreset
|
|
lhi %r3,26
|
|
diag %r2,%r3,8
|
|
la %r5,.Lirb
|
|
stsch 0(%r5) # check if irq is pending
|
|
tm 30(%r5),0x0f # by verifying if any of the
|
|
bnz .Lwaitforirq # activity or status control
|
|
tm 31(%r5),0xff # bits is set in the schib
|
|
bz .Lnoreset
|
|
.Lwaitforirq:
|
|
bas %r14,.Lirqwait # wait for IO interrupt
|
|
c %r1,0xb8 # compare subchannel number
|
|
bne .Lwaitforirq
|
|
la %r5,.Lirb
|
|
tsch 0(%r5)
|
|
.Lnoreset:
|
|
b .Lnoload
|
|
|
|
#
|
|
# everything loaded, go for it
|
|
#
|
|
.Lnoload:
|
|
l %r1,.Lstartup
|
|
br %r1
|
|
|
|
.Linitrd:.long _end # default address of initrd
|
|
.Lparm: .long PARMAREA
|
|
.Lstartup: .long startup
|
|
.Lreset:.byte 0xc3,0xc8,0xc1,0xd5,0xc7,0xc5,0x40,0xd9,0xc4,0xd9,0x40
|
|
.byte 0xc1,0xd3,0xd3,0x40,0xd2,0xc5,0xc5,0xd7,0x40,0xd5,0xd6
|
|
.byte 0xc8,0xd6,0xd3,0xc4 # "change rdr all keep nohold"
|
|
.L_eof: .long 0xc5d6c600 /* C'EOF' */
|
|
.L_hdr: .long 0xc8c4d900 /* C'HDR' */
|
|
.align 8
|
|
.Lcpuid:.fill 8,1,0
|
|
|
|
#
|
|
# SALIPL loader support. Based on a patch by Rob van der Heij.
|
|
# This entry point is called directly from the SALIPL loader and
|
|
# doesn't need a builtin ipl record.
|
|
#
|
|
.org 0x800
|
|
ENTRY(start)
|
|
stm %r0,%r15,0x07b0 # store registers
|
|
bas %r14,.Lsetmode # Immediately switch to 64 bit mode
|
|
basr %r12,%r0
|
|
.base:
|
|
l %r11,.parm
|
|
l %r8,.cmd # pointer to command buffer
|
|
|
|
ltr %r9,%r9 # do we have SALIPL parameters?
|
|
bp .sk8x8
|
|
|
|
mvc 0(64,%r8),0x00b0 # copy saved registers
|
|
xc 64(240-64,%r8),0(%r8) # remainder of buffer
|
|
tr 0(64,%r8),.lowcase
|
|
b .gotr
|
|
.sk8x8:
|
|
mvc 0(240,%r8),0(%r9) # copy iplparms into buffer
|
|
.gotr:
|
|
slr %r0,%r0
|
|
st %r0,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r11)
|
|
st %r0,INITRD_START+ARCH_OFFSET-PARMAREA(%r11)
|
|
j startup # continue with startup
|
|
.cmd: .long COMMAND_LINE # address of command line buffer
|
|
.parm: .long PARMAREA
|
|
.lowcase:
|
|
.byte 0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07
|
|
.byte 0x08,0x09,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f
|
|
.byte 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17
|
|
.byte 0x18,0x19,0x1a,0x1b,0x1c,0x1d,0x1e,0x1f
|
|
.byte 0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27
|
|
.byte 0x28,0x29,0x2a,0x2b,0x2c,0x2d,0x2e,0x2f
|
|
.byte 0x30,0x31,0x32,0x33,0x34,0x35,0x36,0x37
|
|
.byte 0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f
|
|
.byte 0x40,0x41,0x42,0x43,0x44,0x45,0x46,0x47
|
|
.byte 0x48,0x49,0x4a,0x4b,0x4c,0x4d,0x4e,0x4f
|
|
.byte 0x50,0x51,0x52,0x53,0x54,0x55,0x56,0x57
|
|
.byte 0x58,0x59,0x5a,0x5b,0x5c,0x5d,0x5e,0x5f
|
|
.byte 0x60,0x61,0x62,0x63,0x64,0x65,0x66,0x67
|
|
.byte 0x68,0x69,0x6a,0x6b,0x6c,0x6d,0x6e,0x6f
|
|
.byte 0x70,0x71,0x72,0x73,0x74,0x75,0x76,0x77
|
|
.byte 0x78,0x79,0x7a,0x7b,0x7c,0x7d,0x7e,0x7f
|
|
|
|
.byte 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87
|
|
.byte 0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f
|
|
.byte 0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97
|
|
.byte 0x98,0x99,0x9a,0x9b,0x9c,0x9d,0x9e,0x9f
|
|
.byte 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7
|
|
.byte 0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf
|
|
.byte 0xb0,0xb1,0xb2,0xb3,0xb4,0xb5,0xb6,0xb7
|
|
.byte 0xb8,0xb9,0xba,0xbb,0xbc,0xbd,0xbe,0xbf
|
|
.byte 0xc0,0x81,0x82,0x83,0x84,0x85,0x86,0x87 # .abcdefg
|
|
.byte 0x88,0x89,0xca,0xcb,0xcc,0xcd,0xce,0xcf # hi
|
|
.byte 0xd0,0x91,0x92,0x93,0x94,0x95,0x96,0x97 # .jklmnop
|
|
.byte 0x98,0x99,0xda,0xdb,0xdc,0xdd,0xde,0xdf # qr
|
|
.byte 0xe0,0xe1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7 # ..stuvwx
|
|
.byte 0xa8,0xa9,0xea,0xeb,0xec,0xed,0xee,0xef # yz
|
|
.byte 0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7
|
|
.byte 0xf8,0xf9,0xfa,0xfb,0xfc,0xfd,0xfe,0xff
|
|
|
|
#
|
|
# startup-code at 0x10000, running in absolute addressing mode
|
|
# this is called either by the ipl loader or directly by PSW restart
|
|
# or linload or SALIPL
|
|
#
|
|
.org 0x10000
|
|
ENTRY(startup)
|
|
j .Lep_startup_normal
|
|
.org 0x10008
|
|
#
|
|
# This is a list of s390 kernel entry points. At address 0x1000f the number of
|
|
# valid entry points is stored.
|
|
#
|
|
# IMPORTANT: Do not change this table, it is s390 kernel ABI!
|
|
#
|
|
.ascii "S390EP"
|
|
.byte 0x00,0x01
|
|
#
|
|
# kdump startup-code at 0x10010, running in 64 bit absolute addressing mode
|
|
#
|
|
.org 0x10010
|
|
ENTRY(startup_kdump)
|
|
j .Lep_startup_kdump
|
|
.Lep_startup_normal:
|
|
mvi __LC_AR_MODE_ID,1 # set esame flag
|
|
slr %r0,%r0 # set cpuid to zero
|
|
lhi %r1,2 # mode 2 = esame (dump)
|
|
sigp %r1,%r0,0x12 # switch to esame mode
|
|
bras %r13,0f
|
|
.fill 16,4,0x0
|
|
0: lmh %r0,%r15,0(%r13) # clear high-order half of gprs
|
|
sam31 # switch to 31 bit addressing mode
|
|
basr %r13,0 # get base
|
|
.LPG0:
|
|
xc 0x200(256),0x200 # partially clear lowcore
|
|
xc 0x300(256),0x300
|
|
xc 0xe00(256),0xe00
|
|
stck __LC_LAST_UPDATE_CLOCK
|
|
spt 6f-.LPG0(%r13)
|
|
mvc __LC_LAST_UPDATE_TIMER(8),6f-.LPG0(%r13)
|
|
xc __LC_STFL_FAC_LIST(8),__LC_STFL_FAC_LIST
|
|
# check capabilities against MARCH_{G5,Z900,Z990,Z9_109,Z10}
|
|
.insn s,0xb2b10000,0 # store facilities @ __LC_STFL_FAC_LIST
|
|
tm __LC_STFL_FAC_LIST,0x01 # stfle available ?
|
|
jz 0f
|
|
la %r0,1
|
|
.insn s,0xb2b00000,__LC_STFL_FAC_LIST # store facility list extended
|
|
# verify if all required facilities are supported by the machine
|
|
0: la %r1,__LC_STFL_FAC_LIST
|
|
la %r2,3f+8-.LPG0(%r13)
|
|
l %r3,0(%r2)
|
|
1: l %r0,0(%r1)
|
|
n %r0,4(%r2)
|
|
cl %r0,4(%r2)
|
|
jne 2f
|
|
la %r1,4(%r1)
|
|
la %r2,4(%r2)
|
|
ahi %r3,-1
|
|
jnz 1b
|
|
j 4f
|
|
2: l %r15,.Lstack-.LPG0(%r13)
|
|
ahi %r15,-96
|
|
la %r2,.Lals_string-.LPG0(%r13)
|
|
l %r3,.Lsclp_print-.LPG0(%r13)
|
|
basr %r14,%r3
|
|
lpsw 3f-.LPG0(%r13) # machine type not good enough, crash
|
|
.Lals_string:
|
|
.asciz "The Linux kernel requires more recent processor hardware"
|
|
.Lsclp_print:
|
|
.long _sclp_print_early
|
|
.Lstack:
|
|
.long 0x8000 + (1<<(PAGE_SHIFT+THREAD_ORDER))
|
|
.align 16
|
|
3: .long 0x000a0000,0x8badcccc
|
|
|
|
# List of facilities that are required. If not all facilities are present
|
|
# the kernel will crash. Format is number of facility words with bits set,
|
|
# followed by the facility words.
|
|
|
|
#if defined(CONFIG_MARCH_Z13)
|
|
.long 3, 0xc100eff2, 0xf46ce800, 0x00400000
|
|
#elif defined(CONFIG_MARCH_ZEC12)
|
|
.long 3, 0xc100eff2, 0xf46ce800, 0x00400000
|
|
#elif defined(CONFIG_MARCH_Z196)
|
|
.long 2, 0xc100eff2, 0xf46c0000
|
|
#elif defined(CONFIG_MARCH_Z10)
|
|
.long 2, 0xc100eff2, 0xf0680000
|
|
#elif defined(CONFIG_MARCH_Z9_109)
|
|
.long 1, 0xc100efc2
|
|
#elif defined(CONFIG_MARCH_Z990)
|
|
.long 1, 0xc0002000
|
|
#elif defined(CONFIG_MARCH_Z900)
|
|
.long 1, 0xc0000000
|
|
#endif
|
|
4:
|
|
/* Continue with 64bit startup code in head64.S */
|
|
sam64 # switch to 64 bit mode
|
|
jg startup_continue
|
|
|
|
.align 8
|
|
6: .long 0x7fffffff,0xffffffff
|
|
|
|
#include "head_kdump.S"
|
|
|
|
#
|
|
# params at 10400 (setup.h)
|
|
#
|
|
.org PARMAREA
|
|
.long 0,0 # IPL_DEVICE
|
|
.long 0,0 # INITRD_START
|
|
.long 0,0 # INITRD_SIZE
|
|
.long 0,0 # OLDMEM_BASE
|
|
.long 0,0 # OLDMEM_SIZE
|
|
|
|
.org COMMAND_LINE
|
|
.byte "root=/dev/ram0 ro"
|
|
.byte 0
|
|
|
|
.org 0x11000
|