0213436a2c
Some devices don't like REPORT SUPPORTED OPERATION CODES and will simply timeout causing sd_mod init to take a very very long time. Introduce BLIST_NO_RSOC scsi scan flag, that stops RSOC from being issued. Add it to Promise Vtrak E610f entry in scsi scan blacklist. Fixes bug #79901 reported at https://bugzilla.kernel.org/show_bug.cgi?id=79901 Fixes: 98dcc2946adb ("SCSI: sd: Update WRITE SAME heuristics") Signed-off-by: Janusz Dziemidowicz <rraptorr@nails.eu.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Christoph Hellwig <hch@lst.de>
40 lines
2.2 KiB
C
40 lines
2.2 KiB
C
#ifndef _SCSI_SCSI_DEVINFO_H
|
|
#define _SCSI_SCSI_DEVINFO_H
|
|
/*
|
|
* Flags for SCSI devices that need special treatment
|
|
*/
|
|
#define BLIST_NOLUN 0x001 /* Only scan LUN 0 */
|
|
#define BLIST_FORCELUN 0x002 /* Known to have LUNs, force scanning,
|
|
deprecated: Use max_luns=N */
|
|
#define BLIST_BORKEN 0x004 /* Flag for broken handshaking */
|
|
#define BLIST_KEY 0x008 /* unlock by special command */
|
|
#define BLIST_SINGLELUN 0x010 /* Do not use LUNs in parallel */
|
|
#define BLIST_NOTQ 0x020 /* Buggy Tagged Command Queuing */
|
|
#define BLIST_SPARSELUN 0x040 /* Non consecutive LUN numbering */
|
|
#define BLIST_MAX5LUN 0x080 /* Avoid LUNS >= 5 */
|
|
#define BLIST_ISROM 0x100 /* Treat as (removable) CD-ROM */
|
|
#define BLIST_LARGELUN 0x200 /* LUNs past 7 on a SCSI-2 device */
|
|
#define BLIST_INQUIRY_36 0x400 /* override additional length field */
|
|
#define BLIST_INQUIRY_58 0x800 /* ... for broken inquiry responses */
|
|
#define BLIST_NOSTARTONADD 0x1000 /* do not do automatic start on add */
|
|
#define BLIST_MS_SKIP_PAGE_08 0x2000 /* do not send ms page 0x08 */
|
|
#define BLIST_MS_SKIP_PAGE_3F 0x4000 /* do not send ms page 0x3f */
|
|
#define BLIST_USE_10_BYTE_MS 0x8000 /* use 10 byte ms before 6 byte ms */
|
|
#define BLIST_MS_192_BYTES_FOR_3F 0x10000 /* 192 byte ms page 0x3f request */
|
|
#define BLIST_REPORTLUN2 0x20000 /* try REPORT_LUNS even for SCSI-2 devs
|
|
(if HBA supports more than 8 LUNs) */
|
|
#define BLIST_NOREPORTLUN 0x40000 /* don't try REPORT_LUNS scan (SCSI-3 devs) */
|
|
#define BLIST_NOT_LOCKABLE 0x80000 /* don't use PREVENT-ALLOW commands */
|
|
#define BLIST_NO_ULD_ATTACH 0x100000 /* device is actually for RAID config */
|
|
#define BLIST_SELECT_NO_ATN 0x200000 /* select without ATN */
|
|
#define BLIST_RETRY_HWERROR 0x400000 /* retry HARDWARE_ERROR */
|
|
#define BLIST_MAX_512 0x800000 /* maximum 512 sector cdb length */
|
|
#define BLIST_ATTACH_PQ3 0x1000000 /* Scan: Attach to PQ3 devices */
|
|
#define BLIST_NO_DIF 0x2000000 /* Disable T10 PI (DIF) */
|
|
#define BLIST_SKIP_VPD_PAGES 0x4000000 /* Ignore SBC-3 VPD pages */
|
|
#define BLIST_SCSI3LUN 0x8000000 /* Scan more than 256 LUNs
|
|
for sequential scan */
|
|
#define BLIST_TRY_VPD_PAGES 0x10000000 /* Attempt to read VPD pages */
|
|
#define BLIST_NO_RSOC 0x20000000 /* don't try to issue RSOC */
|
|
|
|
#endif
|