This resolves a conflict with these files: drivers/usb/early/ehci-dbgp.c drivers/usb/host/ehci-ls1x.c drivers/usb/host/ohci-xls.c drivers/usb/musb/ux500.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
		
			
				
	
	
		
			712 lines
		
	
	
	
		
			18 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			712 lines
		
	
	
	
		
			18 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
/*
 | 
						|
  USB Driver layer for GSM modems
 | 
						|
 | 
						|
  Copyright (C) 2005  Matthias Urlichs <smurf@smurf.noris.de>
 | 
						|
 | 
						|
  This driver is free software; you can redistribute it and/or modify
 | 
						|
  it under the terms of Version 2 of the GNU General Public License as
 | 
						|
  published by the Free Software Foundation.
 | 
						|
 | 
						|
  Portions copied from the Keyspan driver by Hugh Blemings <hugh@blemings.org>
 | 
						|
 | 
						|
  History: see the git log.
 | 
						|
 | 
						|
  Work sponsored by: Sigos GmbH, Germany <info@sigos.de>
 | 
						|
 | 
						|
  This driver exists because the "normal" serial driver doesn't work too well
 | 
						|
  with GSM modems. Issues:
 | 
						|
  - data loss -- one single Receive URB is not nearly enough
 | 
						|
  - controlling the baud rate doesn't make sense
 | 
						|
*/
 | 
						|
 | 
						|
#define DRIVER_AUTHOR "Matthias Urlichs <smurf@smurf.noris.de>"
 | 
						|
#define DRIVER_DESC "USB Driver for GSM modems"
 | 
						|
 | 
						|
#include <linux/kernel.h>
 | 
						|
#include <linux/jiffies.h>
 | 
						|
#include <linux/errno.h>
 | 
						|
#include <linux/slab.h>
 | 
						|
#include <linux/tty.h>
 | 
						|
#include <linux/tty_flip.h>
 | 
						|
#include <linux/module.h>
 | 
						|
#include <linux/bitops.h>
 | 
						|
#include <linux/uaccess.h>
 | 
						|
#include <linux/usb.h>
 | 
						|
#include <linux/usb/serial.h>
 | 
						|
#include <linux/serial.h>
 | 
						|
#include "usb-wwan.h"
 | 
						|
 | 
						|
void usb_wwan_dtr_rts(struct usb_serial_port *port, int on)
 | 
						|
{
 | 
						|
	struct usb_serial *serial = port->serial;
 | 
						|
	struct usb_wwan_port_private *portdata;
 | 
						|
	struct usb_wwan_intf_private *intfdata;
 | 
						|
 | 
						|
	intfdata = port->serial->private;
 | 
						|
 | 
						|
	if (!intfdata->send_setup)
 | 
						|
		return;
 | 
						|
 | 
						|
	portdata = usb_get_serial_port_data(port);
 | 
						|
	mutex_lock(&serial->disc_mutex);
 | 
						|
	portdata->rts_state = on;
 | 
						|
	portdata->dtr_state = on;
 | 
						|
	if (serial->dev)
 | 
						|
		intfdata->send_setup(port);
 | 
						|
	mutex_unlock(&serial->disc_mutex);
 | 
						|
}
 | 
						|
EXPORT_SYMBOL(usb_wwan_dtr_rts);
 | 
						|
 | 
						|
void usb_wwan_set_termios(struct tty_struct *tty,
 | 
						|
			  struct usb_serial_port *port,
 | 
						|
			  struct ktermios *old_termios)
 | 
						|
{
 | 
						|
	struct usb_wwan_intf_private *intfdata = port->serial->private;
 | 
						|
 | 
						|
	/* Doesn't support option setting */
 | 
						|
	tty_termios_copy_hw(&tty->termios, old_termios);
 | 
						|
 | 
						|
	if (intfdata->send_setup)
 | 
						|
		intfdata->send_setup(port);
 | 
						|
}
 | 
						|
EXPORT_SYMBOL(usb_wwan_set_termios);
 | 
						|
 | 
						|
int usb_wwan_tiocmget(struct tty_struct *tty)
 | 
						|
{
 | 
						|
	struct usb_serial_port *port = tty->driver_data;
 | 
						|
	unsigned int value;
 | 
						|
	struct usb_wwan_port_private *portdata;
 | 
						|
 | 
						|
	portdata = usb_get_serial_port_data(port);
 | 
						|
 | 
						|
	value = ((portdata->rts_state) ? TIOCM_RTS : 0) |
 | 
						|
	    ((portdata->dtr_state) ? TIOCM_DTR : 0) |
 | 
						|
	    ((portdata->cts_state) ? TIOCM_CTS : 0) |
 | 
						|
	    ((portdata->dsr_state) ? TIOCM_DSR : 0) |
 | 
						|
	    ((portdata->dcd_state) ? TIOCM_CAR : 0) |
 | 
						|
	    ((portdata->ri_state) ? TIOCM_RNG : 0);
 | 
						|
 | 
						|
	return value;
 | 
						|
}
 | 
						|
EXPORT_SYMBOL(usb_wwan_tiocmget);
 | 
						|
 | 
						|
int usb_wwan_tiocmset(struct tty_struct *tty,
 | 
						|
		      unsigned int set, unsigned int clear)
 | 
						|
{
 | 
						|
	struct usb_serial_port *port = tty->driver_data;
 | 
						|
	struct usb_wwan_port_private *portdata;
 | 
						|
	struct usb_wwan_intf_private *intfdata;
 | 
						|
 | 
						|
	portdata = usb_get_serial_port_data(port);
 | 
						|
	intfdata = port->serial->private;
 | 
						|
 | 
						|
	if (!intfdata->send_setup)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	/* FIXME: what locks portdata fields ? */
 | 
						|
	if (set & TIOCM_RTS)
 | 
						|
		portdata->rts_state = 1;
 | 
						|
	if (set & TIOCM_DTR)
 | 
						|
		portdata->dtr_state = 1;
 | 
						|
 | 
						|
	if (clear & TIOCM_RTS)
 | 
						|
		portdata->rts_state = 0;
 | 
						|
	if (clear & TIOCM_DTR)
 | 
						|
		portdata->dtr_state = 0;
 | 
						|
	return intfdata->send_setup(port);
 | 
						|
}
 | 
						|
EXPORT_SYMBOL(usb_wwan_tiocmset);
 | 
						|
 | 
						|
static int get_serial_info(struct usb_serial_port *port,
 | 
						|
			   struct serial_struct __user *retinfo)
 | 
						|
{
 | 
						|
	struct serial_struct tmp;
 | 
						|
 | 
						|
	if (!retinfo)
 | 
						|
		return -EFAULT;
 | 
						|
 | 
						|
	memset(&tmp, 0, sizeof(tmp));
 | 
						|
	tmp.line            = port->serial->minor;
 | 
						|
	tmp.port            = port->number;
 | 
						|
	tmp.baud_base       = tty_get_baud_rate(port->port.tty);
 | 
						|
	tmp.close_delay	    = port->port.close_delay / 10;
 | 
						|
	tmp.closing_wait    = port->port.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
 | 
						|
				 ASYNC_CLOSING_WAIT_NONE :
 | 
						|
				 port->port.closing_wait / 10;
 | 
						|
 | 
						|
	if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
 | 
						|
		return -EFAULT;
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int set_serial_info(struct usb_serial_port *port,
 | 
						|
			   struct serial_struct __user *newinfo)
 | 
						|
{
 | 
						|
	struct serial_struct new_serial;
 | 
						|
	unsigned int closing_wait, close_delay;
 | 
						|
	int retval = 0;
 | 
						|
 | 
						|
	if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
 | 
						|
		return -EFAULT;
 | 
						|
 | 
						|
	close_delay = new_serial.close_delay * 10;
 | 
						|
	closing_wait = new_serial.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
 | 
						|
			ASYNC_CLOSING_WAIT_NONE : new_serial.closing_wait * 10;
 | 
						|
 | 
						|
	mutex_lock(&port->port.mutex);
 | 
						|
 | 
						|
	if (!capable(CAP_SYS_ADMIN)) {
 | 
						|
		if ((close_delay != port->port.close_delay) ||
 | 
						|
		    (closing_wait != port->port.closing_wait))
 | 
						|
			retval = -EPERM;
 | 
						|
		else
 | 
						|
			retval = -EOPNOTSUPP;
 | 
						|
	} else {
 | 
						|
		port->port.close_delay  = close_delay;
 | 
						|
		port->port.closing_wait = closing_wait;
 | 
						|
	}
 | 
						|
 | 
						|
	mutex_unlock(&port->port.mutex);
 | 
						|
	return retval;
 | 
						|
}
 | 
						|
 | 
						|
int usb_wwan_ioctl(struct tty_struct *tty,
 | 
						|
		   unsigned int cmd, unsigned long arg)
 | 
						|
{
 | 
						|
	struct usb_serial_port *port = tty->driver_data;
 | 
						|
 | 
						|
	dev_dbg(&port->dev, "%s cmd 0x%04x\n", __func__, cmd);
 | 
						|
 | 
						|
	switch (cmd) {
 | 
						|
	case TIOCGSERIAL:
 | 
						|
		return get_serial_info(port,
 | 
						|
				       (struct serial_struct __user *) arg);
 | 
						|
	case TIOCSSERIAL:
 | 
						|
		return set_serial_info(port,
 | 
						|
				       (struct serial_struct __user *) arg);
 | 
						|
	default:
 | 
						|
		break;
 | 
						|
	}
 | 
						|
 | 
						|
	dev_dbg(&port->dev, "%s arg not supported\n", __func__);
 | 
						|
 | 
						|
	return -ENOIOCTLCMD;
 | 
						|
}
 | 
						|
EXPORT_SYMBOL(usb_wwan_ioctl);
 | 
						|
 | 
						|
/* Write */
 | 
						|
int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port,
 | 
						|
		   const unsigned char *buf, int count)
 | 
						|
{
 | 
						|
	struct usb_wwan_port_private *portdata;
 | 
						|
	struct usb_wwan_intf_private *intfdata;
 | 
						|
	int i;
 | 
						|
	int left, todo;
 | 
						|
	struct urb *this_urb = NULL;	/* spurious */
 | 
						|
	int err;
 | 
						|
	unsigned long flags;
 | 
						|
 | 
						|
	portdata = usb_get_serial_port_data(port);
 | 
						|
	intfdata = port->serial->private;
 | 
						|
 | 
						|
	dev_dbg(&port->dev, "%s: write (%d chars)\n", __func__, count);
 | 
						|
 | 
						|
	i = 0;
 | 
						|
	left = count;
 | 
						|
	for (i = 0; left > 0 && i < N_OUT_URB; i++) {
 | 
						|
		todo = left;
 | 
						|
		if (todo > OUT_BUFLEN)
 | 
						|
			todo = OUT_BUFLEN;
 | 
						|
 | 
						|
		this_urb = portdata->out_urbs[i];
 | 
						|
		if (test_and_set_bit(i, &portdata->out_busy)) {
 | 
						|
			if (time_before(jiffies,
 | 
						|
					portdata->tx_start_time[i] + 10 * HZ))
 | 
						|
				continue;
 | 
						|
			usb_unlink_urb(this_urb);
 | 
						|
			continue;
 | 
						|
		}
 | 
						|
		dev_dbg(&port->dev, "%s: endpoint %d buf %d\n", __func__,
 | 
						|
			usb_pipeendpoint(this_urb->pipe), i);
 | 
						|
 | 
						|
		err = usb_autopm_get_interface_async(port->serial->interface);
 | 
						|
		if (err < 0)
 | 
						|
			break;
 | 
						|
 | 
						|
		/* send the data */
 | 
						|
		memcpy(this_urb->transfer_buffer, buf, todo);
 | 
						|
		this_urb->transfer_buffer_length = todo;
 | 
						|
 | 
						|
		spin_lock_irqsave(&intfdata->susp_lock, flags);
 | 
						|
		if (intfdata->suspended) {
 | 
						|
			usb_anchor_urb(this_urb, &portdata->delayed);
 | 
						|
			spin_unlock_irqrestore(&intfdata->susp_lock, flags);
 | 
						|
		} else {
 | 
						|
			intfdata->in_flight++;
 | 
						|
			spin_unlock_irqrestore(&intfdata->susp_lock, flags);
 | 
						|
			err = usb_submit_urb(this_urb, GFP_ATOMIC);
 | 
						|
			if (err) {
 | 
						|
				dev_dbg(&port->dev,
 | 
						|
					"usb_submit_urb %p (write bulk) failed (%d)\n",
 | 
						|
					this_urb, err);
 | 
						|
				clear_bit(i, &portdata->out_busy);
 | 
						|
				spin_lock_irqsave(&intfdata->susp_lock, flags);
 | 
						|
				intfdata->in_flight--;
 | 
						|
				spin_unlock_irqrestore(&intfdata->susp_lock,
 | 
						|
						       flags);
 | 
						|
				usb_autopm_put_interface_async(port->serial->interface);
 | 
						|
				break;
 | 
						|
			}
 | 
						|
		}
 | 
						|
 | 
						|
		portdata->tx_start_time[i] = jiffies;
 | 
						|
		buf += todo;
 | 
						|
		left -= todo;
 | 
						|
	}
 | 
						|
 | 
						|
	count -= left;
 | 
						|
	dev_dbg(&port->dev, "%s: wrote (did %d)\n", __func__, count);
 | 
						|
	return count;
 | 
						|
}
 | 
						|
EXPORT_SYMBOL(usb_wwan_write);
 | 
						|
 | 
						|
static void usb_wwan_indat_callback(struct urb *urb)
 | 
						|
{
 | 
						|
	int err;
 | 
						|
	int endpoint;
 | 
						|
	struct usb_serial_port *port;
 | 
						|
	struct tty_struct *tty;
 | 
						|
	struct device *dev;
 | 
						|
	unsigned char *data = urb->transfer_buffer;
 | 
						|
	int status = urb->status;
 | 
						|
 | 
						|
	endpoint = usb_pipeendpoint(urb->pipe);
 | 
						|
	port = urb->context;
 | 
						|
	dev = &port->dev;
 | 
						|
 | 
						|
	if (status) {
 | 
						|
		dev_dbg(dev, "%s: nonzero status: %d on endpoint %02x.\n",
 | 
						|
			__func__, status, endpoint);
 | 
						|
	} else {
 | 
						|
		tty = tty_port_tty_get(&port->port);
 | 
						|
		if (tty) {
 | 
						|
			if (urb->actual_length) {
 | 
						|
				tty_insert_flip_string(tty, data,
 | 
						|
						urb->actual_length);
 | 
						|
				tty_flip_buffer_push(tty);
 | 
						|
			} else
 | 
						|
				dev_dbg(dev, "%s: empty read urb received\n", __func__);
 | 
						|
			tty_kref_put(tty);
 | 
						|
		}
 | 
						|
 | 
						|
		/* Resubmit urb so we continue receiving */
 | 
						|
		err = usb_submit_urb(urb, GFP_ATOMIC);
 | 
						|
		if (err) {
 | 
						|
			if (err != -EPERM) {
 | 
						|
				dev_err(dev, "%s: resubmit read urb failed. (%d)\n", __func__, err);
 | 
						|
				/* busy also in error unless we are killed */
 | 
						|
				usb_mark_last_busy(port->serial->dev);
 | 
						|
			}
 | 
						|
		} else {
 | 
						|
			usb_mark_last_busy(port->serial->dev);
 | 
						|
		}
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static void usb_wwan_outdat_callback(struct urb *urb)
 | 
						|
{
 | 
						|
	struct usb_serial_port *port;
 | 
						|
	struct usb_wwan_port_private *portdata;
 | 
						|
	struct usb_wwan_intf_private *intfdata;
 | 
						|
	int i;
 | 
						|
 | 
						|
	port = urb->context;
 | 
						|
	intfdata = port->serial->private;
 | 
						|
 | 
						|
	usb_serial_port_softint(port);
 | 
						|
	usb_autopm_put_interface_async(port->serial->interface);
 | 
						|
	portdata = usb_get_serial_port_data(port);
 | 
						|
	spin_lock(&intfdata->susp_lock);
 | 
						|
	intfdata->in_flight--;
 | 
						|
	spin_unlock(&intfdata->susp_lock);
 | 
						|
 | 
						|
	for (i = 0; i < N_OUT_URB; ++i) {
 | 
						|
		if (portdata->out_urbs[i] == urb) {
 | 
						|
			smp_mb__before_clear_bit();
 | 
						|
			clear_bit(i, &portdata->out_busy);
 | 
						|
			break;
 | 
						|
		}
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
int usb_wwan_write_room(struct tty_struct *tty)
 | 
						|
{
 | 
						|
	struct usb_serial_port *port = tty->driver_data;
 | 
						|
	struct usb_wwan_port_private *portdata;
 | 
						|
	int i;
 | 
						|
	int data_len = 0;
 | 
						|
	struct urb *this_urb;
 | 
						|
 | 
						|
	portdata = usb_get_serial_port_data(port);
 | 
						|
 | 
						|
	for (i = 0; i < N_OUT_URB; i++) {
 | 
						|
		this_urb = portdata->out_urbs[i];
 | 
						|
		if (this_urb && !test_bit(i, &portdata->out_busy))
 | 
						|
			data_len += OUT_BUFLEN;
 | 
						|
	}
 | 
						|
 | 
						|
	dev_dbg(&port->dev, "%s: %d\n", __func__, data_len);
 | 
						|
	return data_len;
 | 
						|
}
 | 
						|
EXPORT_SYMBOL(usb_wwan_write_room);
 | 
						|
 | 
						|
int usb_wwan_chars_in_buffer(struct tty_struct *tty)
 | 
						|
{
 | 
						|
	struct usb_serial_port *port = tty->driver_data;
 | 
						|
	struct usb_wwan_port_private *portdata;
 | 
						|
	int i;
 | 
						|
	int data_len = 0;
 | 
						|
	struct urb *this_urb;
 | 
						|
 | 
						|
	portdata = usb_get_serial_port_data(port);
 | 
						|
 | 
						|
	for (i = 0; i < N_OUT_URB; i++) {
 | 
						|
		this_urb = portdata->out_urbs[i];
 | 
						|
		/* FIXME: This locking is insufficient as this_urb may
 | 
						|
		   go unused during the test */
 | 
						|
		if (this_urb && test_bit(i, &portdata->out_busy))
 | 
						|
			data_len += this_urb->transfer_buffer_length;
 | 
						|
	}
 | 
						|
	dev_dbg(&port->dev, "%s: %d\n", __func__, data_len);
 | 
						|
	return data_len;
 | 
						|
}
 | 
						|
EXPORT_SYMBOL(usb_wwan_chars_in_buffer);
 | 
						|
 | 
						|
int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port)
 | 
						|
{
 | 
						|
	struct usb_wwan_port_private *portdata;
 | 
						|
	struct usb_wwan_intf_private *intfdata;
 | 
						|
	struct usb_serial *serial = port->serial;
 | 
						|
	int i, err;
 | 
						|
	struct urb *urb;
 | 
						|
 | 
						|
	portdata = usb_get_serial_port_data(port);
 | 
						|
	intfdata = serial->private;
 | 
						|
 | 
						|
	/* Start reading from the IN endpoint */
 | 
						|
	for (i = 0; i < N_IN_URB; i++) {
 | 
						|
		urb = portdata->in_urbs[i];
 | 
						|
		if (!urb)
 | 
						|
			continue;
 | 
						|
		err = usb_submit_urb(urb, GFP_KERNEL);
 | 
						|
		if (err) {
 | 
						|
			dev_dbg(&port->dev, "%s: submit urb %d failed (%d) %d\n",
 | 
						|
				__func__, i, err, urb->transfer_buffer_length);
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	if (intfdata->send_setup)
 | 
						|
		intfdata->send_setup(port);
 | 
						|
 | 
						|
	serial->interface->needs_remote_wakeup = 1;
 | 
						|
	spin_lock_irq(&intfdata->susp_lock);
 | 
						|
	portdata->opened = 1;
 | 
						|
	spin_unlock_irq(&intfdata->susp_lock);
 | 
						|
	/* this balances a get in the generic USB serial code */
 | 
						|
	usb_autopm_put_interface(serial->interface);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
EXPORT_SYMBOL(usb_wwan_open);
 | 
						|
 | 
						|
void usb_wwan_close(struct usb_serial_port *port)
 | 
						|
{
 | 
						|
	int i;
 | 
						|
	struct usb_serial *serial = port->serial;
 | 
						|
	struct usb_wwan_port_private *portdata;
 | 
						|
	struct usb_wwan_intf_private *intfdata = port->serial->private;
 | 
						|
 | 
						|
	portdata = usb_get_serial_port_data(port);
 | 
						|
 | 
						|
	if (serial->dev) {
 | 
						|
		/* Stop reading/writing urbs */
 | 
						|
		spin_lock_irq(&intfdata->susp_lock);
 | 
						|
		portdata->opened = 0;
 | 
						|
		spin_unlock_irq(&intfdata->susp_lock);
 | 
						|
 | 
						|
		for (i = 0; i < N_IN_URB; i++)
 | 
						|
			usb_kill_urb(portdata->in_urbs[i]);
 | 
						|
		for (i = 0; i < N_OUT_URB; i++)
 | 
						|
			usb_kill_urb(portdata->out_urbs[i]);
 | 
						|
		/* balancing - important as an error cannot be handled*/
 | 
						|
		usb_autopm_get_interface_no_resume(serial->interface);
 | 
						|
		serial->interface->needs_remote_wakeup = 0;
 | 
						|
	}
 | 
						|
}
 | 
						|
EXPORT_SYMBOL(usb_wwan_close);
 | 
						|
 | 
						|
/* Helper functions used by usb_wwan_setup_urbs */
 | 
						|
static struct urb *usb_wwan_setup_urb(struct usb_serial_port *port,
 | 
						|
				      int endpoint,
 | 
						|
				      int dir, void *ctx, char *buf, int len,
 | 
						|
				      void (*callback) (struct urb *))
 | 
						|
{
 | 
						|
	struct usb_serial *serial = port->serial;
 | 
						|
	struct urb *urb;
 | 
						|
 | 
						|
	urb = usb_alloc_urb(0, GFP_KERNEL);	/* No ISO */
 | 
						|
	if (urb == NULL) {
 | 
						|
		dev_dbg(&serial->interface->dev,
 | 
						|
			"%s: alloc for endpoint %d failed.\n", __func__,
 | 
						|
			endpoint);
 | 
						|
		return NULL;
 | 
						|
	}
 | 
						|
 | 
						|
	/* Fill URB using supplied data. */
 | 
						|
	usb_fill_bulk_urb(urb, serial->dev,
 | 
						|
			  usb_sndbulkpipe(serial->dev, endpoint) | dir,
 | 
						|
			  buf, len, callback, ctx);
 | 
						|
 | 
						|
	return urb;
 | 
						|
}
 | 
						|
 | 
						|
int usb_wwan_port_probe(struct usb_serial_port *port)
 | 
						|
{
 | 
						|
	struct usb_wwan_port_private *portdata;
 | 
						|
	struct urb *urb;
 | 
						|
	u8 *buffer;
 | 
						|
	int err;
 | 
						|
	int i;
 | 
						|
 | 
						|
	portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
 | 
						|
	if (!portdata)
 | 
						|
		return -ENOMEM;
 | 
						|
 | 
						|
	init_usb_anchor(&portdata->delayed);
 | 
						|
 | 
						|
	for (i = 0; i < N_IN_URB; i++) {
 | 
						|
		if (!port->bulk_in_size)
 | 
						|
			break;
 | 
						|
 | 
						|
		buffer = (u8 *)__get_free_page(GFP_KERNEL);
 | 
						|
		if (!buffer)
 | 
						|
			goto bail_out_error;
 | 
						|
		portdata->in_buffer[i] = buffer;
 | 
						|
 | 
						|
		urb = usb_wwan_setup_urb(port, port->bulk_in_endpointAddress,
 | 
						|
						USB_DIR_IN, port,
 | 
						|
						buffer, IN_BUFLEN,
 | 
						|
						usb_wwan_indat_callback);
 | 
						|
		portdata->in_urbs[i] = urb;
 | 
						|
	}
 | 
						|
 | 
						|
	for (i = 0; i < N_OUT_URB; i++) {
 | 
						|
		if (!port->bulk_out_size)
 | 
						|
			break;
 | 
						|
 | 
						|
		buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL);
 | 
						|
		if (!buffer)
 | 
						|
			goto bail_out_error2;
 | 
						|
		portdata->out_buffer[i] = buffer;
 | 
						|
 | 
						|
		urb = usb_wwan_setup_urb(port, port->bulk_out_endpointAddress,
 | 
						|
						USB_DIR_OUT, port,
 | 
						|
						buffer, OUT_BUFLEN,
 | 
						|
						usb_wwan_outdat_callback);
 | 
						|
		portdata->out_urbs[i] = urb;
 | 
						|
	}
 | 
						|
 | 
						|
	usb_set_serial_port_data(port, portdata);
 | 
						|
 | 
						|
	if (port->interrupt_in_urb) {
 | 
						|
		err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 | 
						|
		if (err)
 | 
						|
			dev_dbg(&port->dev, "%s: submit irq_in urb failed %d\n",
 | 
						|
				__func__, err);
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
 | 
						|
bail_out_error2:
 | 
						|
	for (i = 0; i < N_OUT_URB; i++) {
 | 
						|
		usb_free_urb(portdata->out_urbs[i]);
 | 
						|
		kfree(portdata->out_buffer[i]);
 | 
						|
	}
 | 
						|
bail_out_error:
 | 
						|
	for (i = 0; i < N_IN_URB; i++) {
 | 
						|
		usb_free_urb(portdata->in_urbs[i]);
 | 
						|
		free_page((unsigned long)portdata->in_buffer[i]);
 | 
						|
	}
 | 
						|
	kfree(portdata);
 | 
						|
 | 
						|
	return -ENOMEM;
 | 
						|
}
 | 
						|
EXPORT_SYMBOL_GPL(usb_wwan_port_probe);
 | 
						|
 | 
						|
int usb_wwan_port_remove(struct usb_serial_port *port)
 | 
						|
{
 | 
						|
	int i;
 | 
						|
	struct usb_wwan_port_private *portdata;
 | 
						|
 | 
						|
	portdata = usb_get_serial_port_data(port);
 | 
						|
	usb_set_serial_port_data(port, NULL);
 | 
						|
 | 
						|
	/* Stop reading/writing urbs and free them */
 | 
						|
	for (i = 0; i < N_IN_URB; i++) {
 | 
						|
		usb_kill_urb(portdata->in_urbs[i]);
 | 
						|
		usb_free_urb(portdata->in_urbs[i]);
 | 
						|
		free_page((unsigned long)portdata->in_buffer[i]);
 | 
						|
	}
 | 
						|
	for (i = 0; i < N_OUT_URB; i++) {
 | 
						|
		usb_kill_urb(portdata->out_urbs[i]);
 | 
						|
		usb_free_urb(portdata->out_urbs[i]);
 | 
						|
		kfree(portdata->out_buffer[i]);
 | 
						|
	}
 | 
						|
 | 
						|
	/* Now free port private data */
 | 
						|
	kfree(portdata);
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
EXPORT_SYMBOL(usb_wwan_port_remove);
 | 
						|
 | 
						|
#ifdef CONFIG_PM
 | 
						|
static void stop_read_write_urbs(struct usb_serial *serial)
 | 
						|
{
 | 
						|
	int i, j;
 | 
						|
	struct usb_serial_port *port;
 | 
						|
	struct usb_wwan_port_private *portdata;
 | 
						|
 | 
						|
	/* Stop reading/writing urbs */
 | 
						|
	for (i = 0; i < serial->num_ports; ++i) {
 | 
						|
		port = serial->port[i];
 | 
						|
		portdata = usb_get_serial_port_data(port);
 | 
						|
		if (!portdata)
 | 
						|
			continue;
 | 
						|
		for (j = 0; j < N_IN_URB; j++)
 | 
						|
			usb_kill_urb(portdata->in_urbs[j]);
 | 
						|
		for (j = 0; j < N_OUT_URB; j++)
 | 
						|
			usb_kill_urb(portdata->out_urbs[j]);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
int usb_wwan_suspend(struct usb_serial *serial, pm_message_t message)
 | 
						|
{
 | 
						|
	struct usb_wwan_intf_private *intfdata = serial->private;
 | 
						|
	int b;
 | 
						|
 | 
						|
	if (PMSG_IS_AUTO(message)) {
 | 
						|
		spin_lock_irq(&intfdata->susp_lock);
 | 
						|
		b = intfdata->in_flight;
 | 
						|
		spin_unlock_irq(&intfdata->susp_lock);
 | 
						|
 | 
						|
		if (b)
 | 
						|
			return -EBUSY;
 | 
						|
	}
 | 
						|
 | 
						|
	spin_lock_irq(&intfdata->susp_lock);
 | 
						|
	intfdata->suspended = 1;
 | 
						|
	spin_unlock_irq(&intfdata->susp_lock);
 | 
						|
	stop_read_write_urbs(serial);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
EXPORT_SYMBOL(usb_wwan_suspend);
 | 
						|
 | 
						|
static void unbusy_queued_urb(struct urb *urb, struct usb_wwan_port_private *portdata)
 | 
						|
{
 | 
						|
	int i;
 | 
						|
 | 
						|
	for (i = 0; i < N_OUT_URB; i++) {
 | 
						|
		if (urb == portdata->out_urbs[i]) {
 | 
						|
			clear_bit(i, &portdata->out_busy);
 | 
						|
			break;
 | 
						|
		}
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static void play_delayed(struct usb_serial_port *port)
 | 
						|
{
 | 
						|
	struct usb_wwan_intf_private *data;
 | 
						|
	struct usb_wwan_port_private *portdata;
 | 
						|
	struct urb *urb;
 | 
						|
	int err;
 | 
						|
 | 
						|
	portdata = usb_get_serial_port_data(port);
 | 
						|
	data = port->serial->private;
 | 
						|
	while ((urb = usb_get_from_anchor(&portdata->delayed))) {
 | 
						|
		err = usb_submit_urb(urb, GFP_ATOMIC);
 | 
						|
		if (!err) {
 | 
						|
			data->in_flight++;
 | 
						|
		} else {
 | 
						|
			/* we have to throw away the rest */
 | 
						|
			do {
 | 
						|
				unbusy_queued_urb(urb, portdata);
 | 
						|
				usb_autopm_put_interface_no_suspend(port->serial->interface);
 | 
						|
			} while ((urb = usb_get_from_anchor(&portdata->delayed)));
 | 
						|
			break;
 | 
						|
		}
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
int usb_wwan_resume(struct usb_serial *serial)
 | 
						|
{
 | 
						|
	int i, j;
 | 
						|
	struct usb_serial_port *port;
 | 
						|
	struct usb_wwan_intf_private *intfdata = serial->private;
 | 
						|
	struct usb_wwan_port_private *portdata;
 | 
						|
	struct urb *urb;
 | 
						|
	int err = 0;
 | 
						|
 | 
						|
	/* get the interrupt URBs resubmitted unconditionally */
 | 
						|
	for (i = 0; i < serial->num_ports; i++) {
 | 
						|
		port = serial->port[i];
 | 
						|
		if (!port->interrupt_in_urb) {
 | 
						|
			dev_dbg(&port->dev, "%s: No interrupt URB for port\n", __func__);
 | 
						|
			continue;
 | 
						|
		}
 | 
						|
		err = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
 | 
						|
		dev_dbg(&port->dev, "Submitted interrupt URB for port (result %d)\n", err);
 | 
						|
		if (err < 0) {
 | 
						|
			dev_err(&port->dev, "%s: Error %d for interrupt URB\n",
 | 
						|
				__func__, err);
 | 
						|
			goto err_out;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	for (i = 0; i < serial->num_ports; i++) {
 | 
						|
		/* walk all ports */
 | 
						|
		port = serial->port[i];
 | 
						|
		portdata = usb_get_serial_port_data(port);
 | 
						|
 | 
						|
		/* skip closed ports */
 | 
						|
		spin_lock_irq(&intfdata->susp_lock);
 | 
						|
		if (!portdata || !portdata->opened) {
 | 
						|
			spin_unlock_irq(&intfdata->susp_lock);
 | 
						|
			continue;
 | 
						|
		}
 | 
						|
 | 
						|
		for (j = 0; j < N_IN_URB; j++) {
 | 
						|
			urb = portdata->in_urbs[j];
 | 
						|
			err = usb_submit_urb(urb, GFP_ATOMIC);
 | 
						|
			if (err < 0) {
 | 
						|
				dev_err(&port->dev, "%s: Error %d for bulk URB %d\n",
 | 
						|
					__func__, err, i);
 | 
						|
				spin_unlock_irq(&intfdata->susp_lock);
 | 
						|
				goto err_out;
 | 
						|
			}
 | 
						|
		}
 | 
						|
		play_delayed(port);
 | 
						|
		spin_unlock_irq(&intfdata->susp_lock);
 | 
						|
	}
 | 
						|
	spin_lock_irq(&intfdata->susp_lock);
 | 
						|
	intfdata->suspended = 0;
 | 
						|
	spin_unlock_irq(&intfdata->susp_lock);
 | 
						|
err_out:
 | 
						|
	return err;
 | 
						|
}
 | 
						|
EXPORT_SYMBOL(usb_wwan_resume);
 | 
						|
#endif
 | 
						|
 | 
						|
MODULE_AUTHOR(DRIVER_AUTHOR);
 | 
						|
MODULE_DESCRIPTION(DRIVER_DESC);
 | 
						|
MODULE_LICENSE("GPL");
 |