 7a20db379c
			
		
	
	
	7a20db379c
	
	
	
		
			
			Use netdev_rss_key_fill() helper, as it provides better support for some bonding setups. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
		
			
				
	
	
		
			3351 lines
		
	
	
	
		
			85 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			3351 lines
		
	
	
	
		
			85 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
| /****************************************************************************
 | |
|  * Driver for Solarflare network controllers and boards
 | |
|  * Copyright 2005-2006 Fen Systems Ltd.
 | |
|  * Copyright 2005-2013 Solarflare Communications Inc.
 | |
|  *
 | |
|  * This program is free software; you can redistribute it and/or modify it
 | |
|  * under the terms of the GNU General Public License version 2 as published
 | |
|  * by the Free Software Foundation, incorporated herein by reference.
 | |
|  */
 | |
| 
 | |
| #include <linux/module.h>
 | |
| #include <linux/pci.h>
 | |
| #include <linux/netdevice.h>
 | |
| #include <linux/etherdevice.h>
 | |
| #include <linux/delay.h>
 | |
| #include <linux/notifier.h>
 | |
| #include <linux/ip.h>
 | |
| #include <linux/tcp.h>
 | |
| #include <linux/in.h>
 | |
| #include <linux/ethtool.h>
 | |
| #include <linux/topology.h>
 | |
| #include <linux/gfp.h>
 | |
| #include <linux/aer.h>
 | |
| #include <linux/interrupt.h>
 | |
| #include "net_driver.h"
 | |
| #include "efx.h"
 | |
| #include "nic.h"
 | |
| #include "selftest.h"
 | |
| 
 | |
| #include "mcdi.h"
 | |
| #include "workarounds.h"
 | |
| 
 | |
| /**************************************************************************
 | |
|  *
 | |
|  * Type name strings
 | |
|  *
 | |
|  **************************************************************************
 | |
|  */
 | |
| 
 | |
| /* Loopback mode names (see LOOPBACK_MODE()) */
 | |
| const unsigned int efx_loopback_mode_max = LOOPBACK_MAX;
 | |
| const char *const efx_loopback_mode_names[] = {
 | |
| 	[LOOPBACK_NONE]		= "NONE",
 | |
| 	[LOOPBACK_DATA]		= "DATAPATH",
 | |
| 	[LOOPBACK_GMAC]		= "GMAC",
 | |
| 	[LOOPBACK_XGMII]	= "XGMII",
 | |
| 	[LOOPBACK_XGXS]		= "XGXS",
 | |
| 	[LOOPBACK_XAUI]		= "XAUI",
 | |
| 	[LOOPBACK_GMII]		= "GMII",
 | |
| 	[LOOPBACK_SGMII]	= "SGMII",
 | |
| 	[LOOPBACK_XGBR]		= "XGBR",
 | |
| 	[LOOPBACK_XFI]		= "XFI",
 | |
| 	[LOOPBACK_XAUI_FAR]	= "XAUI_FAR",
 | |
| 	[LOOPBACK_GMII_FAR]	= "GMII_FAR",
 | |
| 	[LOOPBACK_SGMII_FAR]	= "SGMII_FAR",
 | |
| 	[LOOPBACK_XFI_FAR]	= "XFI_FAR",
 | |
| 	[LOOPBACK_GPHY]		= "GPHY",
 | |
| 	[LOOPBACK_PHYXS]	= "PHYXS",
 | |
| 	[LOOPBACK_PCS]		= "PCS",
 | |
| 	[LOOPBACK_PMAPMD]	= "PMA/PMD",
 | |
| 	[LOOPBACK_XPORT]	= "XPORT",
 | |
| 	[LOOPBACK_XGMII_WS]	= "XGMII_WS",
 | |
| 	[LOOPBACK_XAUI_WS]	= "XAUI_WS",
 | |
| 	[LOOPBACK_XAUI_WS_FAR]  = "XAUI_WS_FAR",
 | |
| 	[LOOPBACK_XAUI_WS_NEAR] = "XAUI_WS_NEAR",
 | |
| 	[LOOPBACK_GMII_WS]	= "GMII_WS",
 | |
| 	[LOOPBACK_XFI_WS]	= "XFI_WS",
 | |
| 	[LOOPBACK_XFI_WS_FAR]	= "XFI_WS_FAR",
 | |
| 	[LOOPBACK_PHYXS_WS]	= "PHYXS_WS",
 | |
| };
 | |
| 
 | |
| const unsigned int efx_reset_type_max = RESET_TYPE_MAX;
 | |
| const char *const efx_reset_type_names[] = {
 | |
| 	[RESET_TYPE_INVISIBLE]          = "INVISIBLE",
 | |
| 	[RESET_TYPE_ALL]                = "ALL",
 | |
| 	[RESET_TYPE_RECOVER_OR_ALL]     = "RECOVER_OR_ALL",
 | |
| 	[RESET_TYPE_WORLD]              = "WORLD",
 | |
| 	[RESET_TYPE_RECOVER_OR_DISABLE] = "RECOVER_OR_DISABLE",
 | |
| 	[RESET_TYPE_MC_BIST]		= "MC_BIST",
 | |
| 	[RESET_TYPE_DISABLE]            = "DISABLE",
 | |
| 	[RESET_TYPE_TX_WATCHDOG]        = "TX_WATCHDOG",
 | |
| 	[RESET_TYPE_INT_ERROR]          = "INT_ERROR",
 | |
| 	[RESET_TYPE_RX_RECOVERY]        = "RX_RECOVERY",
 | |
| 	[RESET_TYPE_DMA_ERROR]          = "DMA_ERROR",
 | |
| 	[RESET_TYPE_TX_SKIP]            = "TX_SKIP",
 | |
| 	[RESET_TYPE_MC_FAILURE]         = "MC_FAILURE",
 | |
| 	[RESET_TYPE_MCDI_TIMEOUT]	= "MCDI_TIMEOUT (FLR)",
 | |
| };
 | |
| 
 | |
| /* Reset workqueue. If any NIC has a hardware failure then a reset will be
 | |
|  * queued onto this work queue. This is not a per-nic work queue, because
 | |
|  * efx_reset_work() acquires the rtnl lock, so resets are naturally serialised.
 | |
|  */
 | |
| static struct workqueue_struct *reset_workqueue;
 | |
| 
 | |
| /* How often and how many times to poll for a reset while waiting for a
 | |
|  * BIST that another function started to complete.
 | |
|  */
 | |
| #define BIST_WAIT_DELAY_MS	100
 | |
| #define BIST_WAIT_DELAY_COUNT	100
 | |
| 
 | |
| /**************************************************************************
 | |
|  *
 | |
|  * Configurable values
 | |
|  *
 | |
|  *************************************************************************/
 | |
| 
 | |
| /*
 | |
|  * Use separate channels for TX and RX events
 | |
|  *
 | |
|  * Set this to 1 to use separate channels for TX and RX. It allows us
 | |
|  * to control interrupt affinity separately for TX and RX.
 | |
|  *
 | |
|  * This is only used in MSI-X interrupt mode
 | |
|  */
 | |
| static bool separate_tx_channels;
 | |
| module_param(separate_tx_channels, bool, 0444);
 | |
| MODULE_PARM_DESC(separate_tx_channels,
 | |
| 		 "Use separate channels for TX and RX");
 | |
| 
 | |
| /* This is the weight assigned to each of the (per-channel) virtual
 | |
|  * NAPI devices.
 | |
|  */
 | |
| static int napi_weight = 64;
 | |
| 
 | |
| /* This is the time (in jiffies) between invocations of the hardware
 | |
|  * monitor.
 | |
|  * On Falcon-based NICs, this will:
 | |
|  * - Check the on-board hardware monitor;
 | |
|  * - Poll the link state and reconfigure the hardware as necessary.
 | |
|  * On Siena-based NICs for power systems with EEH support, this will give EEH a
 | |
|  * chance to start.
 | |
|  */
 | |
| static unsigned int efx_monitor_interval = 1 * HZ;
 | |
| 
 | |
| /* Initial interrupt moderation settings.  They can be modified after
 | |
|  * module load with ethtool.
 | |
|  *
 | |
|  * The default for RX should strike a balance between increasing the
 | |
|  * round-trip latency and reducing overhead.
 | |
|  */
 | |
| static unsigned int rx_irq_mod_usec = 60;
 | |
| 
 | |
| /* Initial interrupt moderation settings.  They can be modified after
 | |
|  * module load with ethtool.
 | |
|  *
 | |
|  * This default is chosen to ensure that a 10G link does not go idle
 | |
|  * while a TX queue is stopped after it has become full.  A queue is
 | |
|  * restarted when it drops below half full.  The time this takes (assuming
 | |
|  * worst case 3 descriptors per packet and 1024 descriptors) is
 | |
|  *   512 / 3 * 1.2 = 205 usec.
 | |
|  */
 | |
| static unsigned int tx_irq_mod_usec = 150;
 | |
| 
 | |
| /* This is the first interrupt mode to try out of:
 | |
|  * 0 => MSI-X
 | |
|  * 1 => MSI
 | |
|  * 2 => legacy
 | |
|  */
 | |
| static unsigned int interrupt_mode;
 | |
| 
 | |
| /* This is the requested number of CPUs to use for Receive-Side Scaling (RSS),
 | |
|  * i.e. the number of CPUs among which we may distribute simultaneous
 | |
|  * interrupt handling.
 | |
|  *
 | |
|  * Cards without MSI-X will only target one CPU via legacy or MSI interrupt.
 | |
|  * The default (0) means to assign an interrupt to each core.
 | |
|  */
 | |
| static unsigned int rss_cpus;
 | |
| module_param(rss_cpus, uint, 0444);
 | |
| MODULE_PARM_DESC(rss_cpus, "Number of CPUs to use for Receive-Side Scaling");
 | |
| 
 | |
| static bool phy_flash_cfg;
 | |
| module_param(phy_flash_cfg, bool, 0644);
 | |
| MODULE_PARM_DESC(phy_flash_cfg, "Set PHYs into reflash mode initially");
 | |
| 
 | |
| static unsigned irq_adapt_low_thresh = 8000;
 | |
| module_param(irq_adapt_low_thresh, uint, 0644);
 | |
| MODULE_PARM_DESC(irq_adapt_low_thresh,
 | |
| 		 "Threshold score for reducing IRQ moderation");
 | |
| 
 | |
| static unsigned irq_adapt_high_thresh = 16000;
 | |
| module_param(irq_adapt_high_thresh, uint, 0644);
 | |
| MODULE_PARM_DESC(irq_adapt_high_thresh,
 | |
| 		 "Threshold score for increasing IRQ moderation");
 | |
| 
 | |
| static unsigned debug = (NETIF_MSG_DRV | NETIF_MSG_PROBE |
 | |
| 			 NETIF_MSG_LINK | NETIF_MSG_IFDOWN |
 | |
| 			 NETIF_MSG_IFUP | NETIF_MSG_RX_ERR |
 | |
| 			 NETIF_MSG_TX_ERR | NETIF_MSG_HW);
 | |
| module_param(debug, uint, 0);
 | |
| MODULE_PARM_DESC(debug, "Bitmapped debugging message enable value");
 | |
| 
 | |
| /**************************************************************************
 | |
|  *
 | |
|  * Utility functions and prototypes
 | |
|  *
 | |
|  *************************************************************************/
 | |
| 
 | |
| static int efx_soft_enable_interrupts(struct efx_nic *efx);
 | |
| static void efx_soft_disable_interrupts(struct efx_nic *efx);
 | |
| static void efx_remove_channel(struct efx_channel *channel);
 | |
| static void efx_remove_channels(struct efx_nic *efx);
 | |
| static const struct efx_channel_type efx_default_channel_type;
 | |
| static void efx_remove_port(struct efx_nic *efx);
 | |
| static void efx_init_napi_channel(struct efx_channel *channel);
 | |
| static void efx_fini_napi(struct efx_nic *efx);
 | |
| static void efx_fini_napi_channel(struct efx_channel *channel);
 | |
| static void efx_fini_struct(struct efx_nic *efx);
 | |
| static void efx_start_all(struct efx_nic *efx);
 | |
| static void efx_stop_all(struct efx_nic *efx);
 | |
| 
 | |
| #define EFX_ASSERT_RESET_SERIALISED(efx)		\
 | |
| 	do {						\
 | |
| 		if ((efx->state == STATE_READY) ||	\
 | |
| 		    (efx->state == STATE_RECOVERY) ||	\
 | |
| 		    (efx->state == STATE_DISABLED))	\
 | |
| 			ASSERT_RTNL();			\
 | |
| 	} while (0)
 | |
| 
 | |
| static int efx_check_disabled(struct efx_nic *efx)
 | |
| {
 | |
| 	if (efx->state == STATE_DISABLED || efx->state == STATE_RECOVERY) {
 | |
| 		netif_err(efx, drv, efx->net_dev,
 | |
| 			  "device is disabled due to earlier errors\n");
 | |
| 		return -EIO;
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**************************************************************************
 | |
|  *
 | |
|  * Event queue processing
 | |
|  *
 | |
|  *************************************************************************/
 | |
| 
 | |
| /* Process channel's event queue
 | |
|  *
 | |
|  * This function is responsible for processing the event queue of a
 | |
|  * single channel.  The caller must guarantee that this function will
 | |
|  * never be concurrently called more than once on the same channel,
 | |
|  * though different channels may be being processed concurrently.
 | |
|  */
 | |
| static int efx_process_channel(struct efx_channel *channel, int budget)
 | |
| {
 | |
| 	int spent;
 | |
| 
 | |
| 	if (unlikely(!channel->enabled))
 | |
| 		return 0;
 | |
| 
 | |
| 	spent = efx_nic_process_eventq(channel, budget);
 | |
| 	if (spent && efx_channel_has_rx_queue(channel)) {
 | |
| 		struct efx_rx_queue *rx_queue =
 | |
| 			efx_channel_get_rx_queue(channel);
 | |
| 
 | |
| 		efx_rx_flush_packet(channel);
 | |
| 		efx_fast_push_rx_descriptors(rx_queue, true);
 | |
| 	}
 | |
| 
 | |
| 	return spent;
 | |
| }
 | |
| 
 | |
| /* NAPI poll handler
 | |
|  *
 | |
|  * NAPI guarantees serialisation of polls of the same device, which
 | |
|  * provides the guarantee required by efx_process_channel().
 | |
|  */
 | |
| static int efx_poll(struct napi_struct *napi, int budget)
 | |
| {
 | |
| 	struct efx_channel *channel =
 | |
| 		container_of(napi, struct efx_channel, napi_str);
 | |
| 	struct efx_nic *efx = channel->efx;
 | |
| 	int spent;
 | |
| 
 | |
| 	if (!efx_channel_lock_napi(channel))
 | |
| 		return budget;
 | |
| 
 | |
| 	netif_vdbg(efx, intr, efx->net_dev,
 | |
| 		   "channel %d NAPI poll executing on CPU %d\n",
 | |
| 		   channel->channel, raw_smp_processor_id());
 | |
| 
 | |
| 	spent = efx_process_channel(channel, budget);
 | |
| 
 | |
| 	if (spent < budget) {
 | |
| 		if (efx_channel_has_rx_queue(channel) &&
 | |
| 		    efx->irq_rx_adaptive &&
 | |
| 		    unlikely(++channel->irq_count == 1000)) {
 | |
| 			if (unlikely(channel->irq_mod_score <
 | |
| 				     irq_adapt_low_thresh)) {
 | |
| 				if (channel->irq_moderation > 1) {
 | |
| 					channel->irq_moderation -= 1;
 | |
| 					efx->type->push_irq_moderation(channel);
 | |
| 				}
 | |
| 			} else if (unlikely(channel->irq_mod_score >
 | |
| 					    irq_adapt_high_thresh)) {
 | |
| 				if (channel->irq_moderation <
 | |
| 				    efx->irq_rx_moderation) {
 | |
| 					channel->irq_moderation += 1;
 | |
| 					efx->type->push_irq_moderation(channel);
 | |
| 				}
 | |
| 			}
 | |
| 			channel->irq_count = 0;
 | |
| 			channel->irq_mod_score = 0;
 | |
| 		}
 | |
| 
 | |
| 		efx_filter_rfs_expire(channel);
 | |
| 
 | |
| 		/* There is no race here; although napi_disable() will
 | |
| 		 * only wait for napi_complete(), this isn't a problem
 | |
| 		 * since efx_nic_eventq_read_ack() will have no effect if
 | |
| 		 * interrupts have already been disabled.
 | |
| 		 */
 | |
| 		napi_complete(napi);
 | |
| 		efx_nic_eventq_read_ack(channel);
 | |
| 	}
 | |
| 
 | |
| 	efx_channel_unlock_napi(channel);
 | |
| 	return spent;
 | |
| }
 | |
| 
 | |
| /* Create event queue
 | |
|  * Event queue memory allocations are done only once.  If the channel
 | |
|  * is reset, the memory buffer will be reused; this guards against
 | |
|  * errors during channel reset and also simplifies interrupt handling.
 | |
|  */
 | |
| static int efx_probe_eventq(struct efx_channel *channel)
 | |
| {
 | |
| 	struct efx_nic *efx = channel->efx;
 | |
| 	unsigned long entries;
 | |
| 
 | |
| 	netif_dbg(efx, probe, efx->net_dev,
 | |
| 		  "chan %d create event queue\n", channel->channel);
 | |
| 
 | |
| 	/* Build an event queue with room for one event per tx and rx buffer,
 | |
| 	 * plus some extra for link state events and MCDI completions. */
 | |
| 	entries = roundup_pow_of_two(efx->rxq_entries + efx->txq_entries + 128);
 | |
| 	EFX_BUG_ON_PARANOID(entries > EFX_MAX_EVQ_SIZE);
 | |
| 	channel->eventq_mask = max(entries, EFX_MIN_EVQ_SIZE) - 1;
 | |
| 
 | |
| 	return efx_nic_probe_eventq(channel);
 | |
| }
 | |
| 
 | |
| /* Prepare channel's event queue */
 | |
| static int efx_init_eventq(struct efx_channel *channel)
 | |
| {
 | |
| 	struct efx_nic *efx = channel->efx;
 | |
| 	int rc;
 | |
| 
 | |
| 	EFX_WARN_ON_PARANOID(channel->eventq_init);
 | |
| 
 | |
| 	netif_dbg(efx, drv, efx->net_dev,
 | |
| 		  "chan %d init event queue\n", channel->channel);
 | |
| 
 | |
| 	rc = efx_nic_init_eventq(channel);
 | |
| 	if (rc == 0) {
 | |
| 		efx->type->push_irq_moderation(channel);
 | |
| 		channel->eventq_read_ptr = 0;
 | |
| 		channel->eventq_init = true;
 | |
| 	}
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| /* Enable event queue processing and NAPI */
 | |
| void efx_start_eventq(struct efx_channel *channel)
 | |
| {
 | |
| 	netif_dbg(channel->efx, ifup, channel->efx->net_dev,
 | |
| 		  "chan %d start event queue\n", channel->channel);
 | |
| 
 | |
| 	/* Make sure the NAPI handler sees the enabled flag set */
 | |
| 	channel->enabled = true;
 | |
| 	smp_wmb();
 | |
| 
 | |
| 	efx_channel_enable(channel);
 | |
| 	napi_enable(&channel->napi_str);
 | |
| 	efx_nic_eventq_read_ack(channel);
 | |
| }
 | |
| 
 | |
| /* Disable event queue processing and NAPI */
 | |
| void efx_stop_eventq(struct efx_channel *channel)
 | |
| {
 | |
| 	if (!channel->enabled)
 | |
| 		return;
 | |
| 
 | |
| 	napi_disable(&channel->napi_str);
 | |
| 	while (!efx_channel_disable(channel))
 | |
| 		usleep_range(1000, 20000);
 | |
| 	channel->enabled = false;
 | |
| }
 | |
| 
 | |
| static void efx_fini_eventq(struct efx_channel *channel)
 | |
| {
 | |
| 	if (!channel->eventq_init)
 | |
| 		return;
 | |
| 
 | |
| 	netif_dbg(channel->efx, drv, channel->efx->net_dev,
 | |
| 		  "chan %d fini event queue\n", channel->channel);
 | |
| 
 | |
| 	efx_nic_fini_eventq(channel);
 | |
| 	channel->eventq_init = false;
 | |
| }
 | |
| 
 | |
| static void efx_remove_eventq(struct efx_channel *channel)
 | |
| {
 | |
| 	netif_dbg(channel->efx, drv, channel->efx->net_dev,
 | |
| 		  "chan %d remove event queue\n", channel->channel);
 | |
| 
 | |
| 	efx_nic_remove_eventq(channel);
 | |
| }
 | |
| 
 | |
| /**************************************************************************
 | |
|  *
 | |
|  * Channel handling
 | |
|  *
 | |
|  *************************************************************************/
 | |
| 
 | |
| /* Allocate and initialise a channel structure. */
 | |
| static struct efx_channel *
 | |
| efx_alloc_channel(struct efx_nic *efx, int i, struct efx_channel *old_channel)
 | |
| {
 | |
| 	struct efx_channel *channel;
 | |
| 	struct efx_rx_queue *rx_queue;
 | |
| 	struct efx_tx_queue *tx_queue;
 | |
| 	int j;
 | |
| 
 | |
| 	channel = kzalloc(sizeof(*channel), GFP_KERNEL);
 | |
| 	if (!channel)
 | |
| 		return NULL;
 | |
| 
 | |
| 	channel->efx = efx;
 | |
| 	channel->channel = i;
 | |
| 	channel->type = &efx_default_channel_type;
 | |
| 
 | |
| 	for (j = 0; j < EFX_TXQ_TYPES; j++) {
 | |
| 		tx_queue = &channel->tx_queue[j];
 | |
| 		tx_queue->efx = efx;
 | |
| 		tx_queue->queue = i * EFX_TXQ_TYPES + j;
 | |
| 		tx_queue->channel = channel;
 | |
| 	}
 | |
| 
 | |
| 	rx_queue = &channel->rx_queue;
 | |
| 	rx_queue->efx = efx;
 | |
| 	setup_timer(&rx_queue->slow_fill, efx_rx_slow_fill,
 | |
| 		    (unsigned long)rx_queue);
 | |
| 
 | |
| 	return channel;
 | |
| }
 | |
| 
 | |
| /* Allocate and initialise a channel structure, copying parameters
 | |
|  * (but not resources) from an old channel structure.
 | |
|  */
 | |
| static struct efx_channel *
 | |
| efx_copy_channel(const struct efx_channel *old_channel)
 | |
| {
 | |
| 	struct efx_channel *channel;
 | |
| 	struct efx_rx_queue *rx_queue;
 | |
| 	struct efx_tx_queue *tx_queue;
 | |
| 	int j;
 | |
| 
 | |
| 	channel = kmalloc(sizeof(*channel), GFP_KERNEL);
 | |
| 	if (!channel)
 | |
| 		return NULL;
 | |
| 
 | |
| 	*channel = *old_channel;
 | |
| 
 | |
| 	channel->napi_dev = NULL;
 | |
| 	memset(&channel->eventq, 0, sizeof(channel->eventq));
 | |
| 
 | |
| 	for (j = 0; j < EFX_TXQ_TYPES; j++) {
 | |
| 		tx_queue = &channel->tx_queue[j];
 | |
| 		if (tx_queue->channel)
 | |
| 			tx_queue->channel = channel;
 | |
| 		tx_queue->buffer = NULL;
 | |
| 		memset(&tx_queue->txd, 0, sizeof(tx_queue->txd));
 | |
| 	}
 | |
| 
 | |
| 	rx_queue = &channel->rx_queue;
 | |
| 	rx_queue->buffer = NULL;
 | |
| 	memset(&rx_queue->rxd, 0, sizeof(rx_queue->rxd));
 | |
| 	setup_timer(&rx_queue->slow_fill, efx_rx_slow_fill,
 | |
| 		    (unsigned long)rx_queue);
 | |
| 
 | |
| 	return channel;
 | |
| }
 | |
| 
 | |
| static int efx_probe_channel(struct efx_channel *channel)
 | |
| {
 | |
| 	struct efx_tx_queue *tx_queue;
 | |
| 	struct efx_rx_queue *rx_queue;
 | |
| 	int rc;
 | |
| 
 | |
| 	netif_dbg(channel->efx, probe, channel->efx->net_dev,
 | |
| 		  "creating channel %d\n", channel->channel);
 | |
| 
 | |
| 	rc = channel->type->pre_probe(channel);
 | |
| 	if (rc)
 | |
| 		goto fail;
 | |
| 
 | |
| 	rc = efx_probe_eventq(channel);
 | |
| 	if (rc)
 | |
| 		goto fail;
 | |
| 
 | |
| 	efx_for_each_channel_tx_queue(tx_queue, channel) {
 | |
| 		rc = efx_probe_tx_queue(tx_queue);
 | |
| 		if (rc)
 | |
| 			goto fail;
 | |
| 	}
 | |
| 
 | |
| 	efx_for_each_channel_rx_queue(rx_queue, channel) {
 | |
| 		rc = efx_probe_rx_queue(rx_queue);
 | |
| 		if (rc)
 | |
| 			goto fail;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| fail:
 | |
| 	efx_remove_channel(channel);
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| static void
 | |
| efx_get_channel_name(struct efx_channel *channel, char *buf, size_t len)
 | |
| {
 | |
| 	struct efx_nic *efx = channel->efx;
 | |
| 	const char *type;
 | |
| 	int number;
 | |
| 
 | |
| 	number = channel->channel;
 | |
| 	if (efx->tx_channel_offset == 0) {
 | |
| 		type = "";
 | |
| 	} else if (channel->channel < efx->tx_channel_offset) {
 | |
| 		type = "-rx";
 | |
| 	} else {
 | |
| 		type = "-tx";
 | |
| 		number -= efx->tx_channel_offset;
 | |
| 	}
 | |
| 	snprintf(buf, len, "%s%s-%d", efx->name, type, number);
 | |
| }
 | |
| 
 | |
| static void efx_set_channel_names(struct efx_nic *efx)
 | |
| {
 | |
| 	struct efx_channel *channel;
 | |
| 
 | |
| 	efx_for_each_channel(channel, efx)
 | |
| 		channel->type->get_name(channel,
 | |
| 					efx->msi_context[channel->channel].name,
 | |
| 					sizeof(efx->msi_context[0].name));
 | |
| }
 | |
| 
 | |
| static int efx_probe_channels(struct efx_nic *efx)
 | |
| {
 | |
| 	struct efx_channel *channel;
 | |
| 	int rc;
 | |
| 
 | |
| 	/* Restart special buffer allocation */
 | |
| 	efx->next_buffer_table = 0;
 | |
| 
 | |
| 	/* Probe channels in reverse, so that any 'extra' channels
 | |
| 	 * use the start of the buffer table. This allows the traffic
 | |
| 	 * channels to be resized without moving them or wasting the
 | |
| 	 * entries before them.
 | |
| 	 */
 | |
| 	efx_for_each_channel_rev(channel, efx) {
 | |
| 		rc = efx_probe_channel(channel);
 | |
| 		if (rc) {
 | |
| 			netif_err(efx, probe, efx->net_dev,
 | |
| 				  "failed to create channel %d\n",
 | |
| 				  channel->channel);
 | |
| 			goto fail;
 | |
| 		}
 | |
| 	}
 | |
| 	efx_set_channel_names(efx);
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| fail:
 | |
| 	efx_remove_channels(efx);
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| /* Channels are shutdown and reinitialised whilst the NIC is running
 | |
|  * to propagate configuration changes (mtu, checksum offload), or
 | |
|  * to clear hardware error conditions
 | |
|  */
 | |
| static void efx_start_datapath(struct efx_nic *efx)
 | |
| {
 | |
| 	bool old_rx_scatter = efx->rx_scatter;
 | |
| 	struct efx_tx_queue *tx_queue;
 | |
| 	struct efx_rx_queue *rx_queue;
 | |
| 	struct efx_channel *channel;
 | |
| 	size_t rx_buf_len;
 | |
| 
 | |
| 	/* Calculate the rx buffer allocation parameters required to
 | |
| 	 * support the current MTU, including padding for header
 | |
| 	 * alignment and overruns.
 | |
| 	 */
 | |
| 	efx->rx_dma_len = (efx->rx_prefix_size +
 | |
| 			   EFX_MAX_FRAME_LEN(efx->net_dev->mtu) +
 | |
| 			   efx->type->rx_buffer_padding);
 | |
| 	rx_buf_len = (sizeof(struct efx_rx_page_state) +
 | |
| 		      efx->rx_ip_align + efx->rx_dma_len);
 | |
| 	if (rx_buf_len <= PAGE_SIZE) {
 | |
| 		efx->rx_scatter = efx->type->always_rx_scatter;
 | |
| 		efx->rx_buffer_order = 0;
 | |
| 	} else if (efx->type->can_rx_scatter) {
 | |
| 		BUILD_BUG_ON(EFX_RX_USR_BUF_SIZE % L1_CACHE_BYTES);
 | |
| 		BUILD_BUG_ON(sizeof(struct efx_rx_page_state) +
 | |
| 			     2 * ALIGN(NET_IP_ALIGN + EFX_RX_USR_BUF_SIZE,
 | |
| 				       EFX_RX_BUF_ALIGNMENT) >
 | |
| 			     PAGE_SIZE);
 | |
| 		efx->rx_scatter = true;
 | |
| 		efx->rx_dma_len = EFX_RX_USR_BUF_SIZE;
 | |
| 		efx->rx_buffer_order = 0;
 | |
| 	} else {
 | |
| 		efx->rx_scatter = false;
 | |
| 		efx->rx_buffer_order = get_order(rx_buf_len);
 | |
| 	}
 | |
| 
 | |
| 	efx_rx_config_page_split(efx);
 | |
| 	if (efx->rx_buffer_order)
 | |
| 		netif_dbg(efx, drv, efx->net_dev,
 | |
| 			  "RX buf len=%u; page order=%u batch=%u\n",
 | |
| 			  efx->rx_dma_len, efx->rx_buffer_order,
 | |
| 			  efx->rx_pages_per_batch);
 | |
| 	else
 | |
| 		netif_dbg(efx, drv, efx->net_dev,
 | |
| 			  "RX buf len=%u step=%u bpp=%u; page batch=%u\n",
 | |
| 			  efx->rx_dma_len, efx->rx_page_buf_step,
 | |
| 			  efx->rx_bufs_per_page, efx->rx_pages_per_batch);
 | |
| 
 | |
| 	/* RX filters may also have scatter-enabled flags */
 | |
| 	if (efx->rx_scatter != old_rx_scatter)
 | |
| 		efx->type->filter_update_rx_scatter(efx);
 | |
| 
 | |
| 	/* We must keep at least one descriptor in a TX ring empty.
 | |
| 	 * We could avoid this when the queue size does not exactly
 | |
| 	 * match the hardware ring size, but it's not that important.
 | |
| 	 * Therefore we stop the queue when one more skb might fill
 | |
| 	 * the ring completely.  We wake it when half way back to
 | |
| 	 * empty.
 | |
| 	 */
 | |
| 	efx->txq_stop_thresh = efx->txq_entries - efx_tx_max_skb_descs(efx);
 | |
| 	efx->txq_wake_thresh = efx->txq_stop_thresh / 2;
 | |
| 
 | |
| 	/* Initialise the channels */
 | |
| 	efx_for_each_channel(channel, efx) {
 | |
| 		efx_for_each_channel_tx_queue(tx_queue, channel) {
 | |
| 			efx_init_tx_queue(tx_queue);
 | |
| 			atomic_inc(&efx->active_queues);
 | |
| 		}
 | |
| 
 | |
| 		efx_for_each_channel_rx_queue(rx_queue, channel) {
 | |
| 			efx_init_rx_queue(rx_queue);
 | |
| 			atomic_inc(&efx->active_queues);
 | |
| 			efx_stop_eventq(channel);
 | |
| 			efx_fast_push_rx_descriptors(rx_queue, false);
 | |
| 			efx_start_eventq(channel);
 | |
| 		}
 | |
| 
 | |
| 		WARN_ON(channel->rx_pkt_n_frags);
 | |
| 	}
 | |
| 
 | |
| 	efx_ptp_start_datapath(efx);
 | |
| 
 | |
| 	if (netif_device_present(efx->net_dev))
 | |
| 		netif_tx_wake_all_queues(efx->net_dev);
 | |
| }
 | |
| 
 | |
| static void efx_stop_datapath(struct efx_nic *efx)
 | |
| {
 | |
| 	struct efx_channel *channel;
 | |
| 	struct efx_tx_queue *tx_queue;
 | |
| 	struct efx_rx_queue *rx_queue;
 | |
| 	int rc;
 | |
| 
 | |
| 	EFX_ASSERT_RESET_SERIALISED(efx);
 | |
| 	BUG_ON(efx->port_enabled);
 | |
| 
 | |
| 	efx_ptp_stop_datapath(efx);
 | |
| 
 | |
| 	/* Stop RX refill */
 | |
| 	efx_for_each_channel(channel, efx) {
 | |
| 		efx_for_each_channel_rx_queue(rx_queue, channel)
 | |
| 			rx_queue->refill_enabled = false;
 | |
| 	}
 | |
| 
 | |
| 	efx_for_each_channel(channel, efx) {
 | |
| 		/* RX packet processing is pipelined, so wait for the
 | |
| 		 * NAPI handler to complete.  At least event queue 0
 | |
| 		 * might be kept active by non-data events, so don't
 | |
| 		 * use napi_synchronize() but actually disable NAPI
 | |
| 		 * temporarily.
 | |
| 		 */
 | |
| 		if (efx_channel_has_rx_queue(channel)) {
 | |
| 			efx_stop_eventq(channel);
 | |
| 			efx_start_eventq(channel);
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	rc = efx->type->fini_dmaq(efx);
 | |
| 	if (rc && EFX_WORKAROUND_7803(efx)) {
 | |
| 		/* Schedule a reset to recover from the flush failure. The
 | |
| 		 * descriptor caches reference memory we're about to free,
 | |
| 		 * but falcon_reconfigure_mac_wrapper() won't reconnect
 | |
| 		 * the MACs because of the pending reset.
 | |
| 		 */
 | |
| 		netif_err(efx, drv, efx->net_dev,
 | |
| 			  "Resetting to recover from flush failure\n");
 | |
| 		efx_schedule_reset(efx, RESET_TYPE_ALL);
 | |
| 	} else if (rc) {
 | |
| 		netif_err(efx, drv, efx->net_dev, "failed to flush queues\n");
 | |
| 	} else {
 | |
| 		netif_dbg(efx, drv, efx->net_dev,
 | |
| 			  "successfully flushed all queues\n");
 | |
| 	}
 | |
| 
 | |
| 	efx_for_each_channel(channel, efx) {
 | |
| 		efx_for_each_channel_rx_queue(rx_queue, channel)
 | |
| 			efx_fini_rx_queue(rx_queue);
 | |
| 		efx_for_each_possible_channel_tx_queue(tx_queue, channel)
 | |
| 			efx_fini_tx_queue(tx_queue);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static void efx_remove_channel(struct efx_channel *channel)
 | |
| {
 | |
| 	struct efx_tx_queue *tx_queue;
 | |
| 	struct efx_rx_queue *rx_queue;
 | |
| 
 | |
| 	netif_dbg(channel->efx, drv, channel->efx->net_dev,
 | |
| 		  "destroy chan %d\n", channel->channel);
 | |
| 
 | |
| 	efx_for_each_channel_rx_queue(rx_queue, channel)
 | |
| 		efx_remove_rx_queue(rx_queue);
 | |
| 	efx_for_each_possible_channel_tx_queue(tx_queue, channel)
 | |
| 		efx_remove_tx_queue(tx_queue);
 | |
| 	efx_remove_eventq(channel);
 | |
| 	channel->type->post_remove(channel);
 | |
| }
 | |
| 
 | |
| static void efx_remove_channels(struct efx_nic *efx)
 | |
| {
 | |
| 	struct efx_channel *channel;
 | |
| 
 | |
| 	efx_for_each_channel(channel, efx)
 | |
| 		efx_remove_channel(channel);
 | |
| }
 | |
| 
 | |
| int
 | |
| efx_realloc_channels(struct efx_nic *efx, u32 rxq_entries, u32 txq_entries)
 | |
| {
 | |
| 	struct efx_channel *other_channel[EFX_MAX_CHANNELS], *channel;
 | |
| 	u32 old_rxq_entries, old_txq_entries;
 | |
| 	unsigned i, next_buffer_table = 0;
 | |
| 	int rc, rc2;
 | |
| 
 | |
| 	rc = efx_check_disabled(efx);
 | |
| 	if (rc)
 | |
| 		return rc;
 | |
| 
 | |
| 	/* Not all channels should be reallocated. We must avoid
 | |
| 	 * reallocating their buffer table entries.
 | |
| 	 */
 | |
| 	efx_for_each_channel(channel, efx) {
 | |
| 		struct efx_rx_queue *rx_queue;
 | |
| 		struct efx_tx_queue *tx_queue;
 | |
| 
 | |
| 		if (channel->type->copy)
 | |
| 			continue;
 | |
| 		next_buffer_table = max(next_buffer_table,
 | |
| 					channel->eventq.index +
 | |
| 					channel->eventq.entries);
 | |
| 		efx_for_each_channel_rx_queue(rx_queue, channel)
 | |
| 			next_buffer_table = max(next_buffer_table,
 | |
| 						rx_queue->rxd.index +
 | |
| 						rx_queue->rxd.entries);
 | |
| 		efx_for_each_channel_tx_queue(tx_queue, channel)
 | |
| 			next_buffer_table = max(next_buffer_table,
 | |
| 						tx_queue->txd.index +
 | |
| 						tx_queue->txd.entries);
 | |
| 	}
 | |
| 
 | |
| 	efx_device_detach_sync(efx);
 | |
| 	efx_stop_all(efx);
 | |
| 	efx_soft_disable_interrupts(efx);
 | |
| 
 | |
| 	/* Clone channels (where possible) */
 | |
| 	memset(other_channel, 0, sizeof(other_channel));
 | |
| 	for (i = 0; i < efx->n_channels; i++) {
 | |
| 		channel = efx->channel[i];
 | |
| 		if (channel->type->copy)
 | |
| 			channel = channel->type->copy(channel);
 | |
| 		if (!channel) {
 | |
| 			rc = -ENOMEM;
 | |
| 			goto out;
 | |
| 		}
 | |
| 		other_channel[i] = channel;
 | |
| 	}
 | |
| 
 | |
| 	/* Swap entry counts and channel pointers */
 | |
| 	old_rxq_entries = efx->rxq_entries;
 | |
| 	old_txq_entries = efx->txq_entries;
 | |
| 	efx->rxq_entries = rxq_entries;
 | |
| 	efx->txq_entries = txq_entries;
 | |
| 	for (i = 0; i < efx->n_channels; i++) {
 | |
| 		channel = efx->channel[i];
 | |
| 		efx->channel[i] = other_channel[i];
 | |
| 		other_channel[i] = channel;
 | |
| 	}
 | |
| 
 | |
| 	/* Restart buffer table allocation */
 | |
| 	efx->next_buffer_table = next_buffer_table;
 | |
| 
 | |
| 	for (i = 0; i < efx->n_channels; i++) {
 | |
| 		channel = efx->channel[i];
 | |
| 		if (!channel->type->copy)
 | |
| 			continue;
 | |
| 		rc = efx_probe_channel(channel);
 | |
| 		if (rc)
 | |
| 			goto rollback;
 | |
| 		efx_init_napi_channel(efx->channel[i]);
 | |
| 	}
 | |
| 
 | |
| out:
 | |
| 	/* Destroy unused channel structures */
 | |
| 	for (i = 0; i < efx->n_channels; i++) {
 | |
| 		channel = other_channel[i];
 | |
| 		if (channel && channel->type->copy) {
 | |
| 			efx_fini_napi_channel(channel);
 | |
| 			efx_remove_channel(channel);
 | |
| 			kfree(channel);
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	rc2 = efx_soft_enable_interrupts(efx);
 | |
| 	if (rc2) {
 | |
| 		rc = rc ? rc : rc2;
 | |
| 		netif_err(efx, drv, efx->net_dev,
 | |
| 			  "unable to restart interrupts on channel reallocation\n");
 | |
| 		efx_schedule_reset(efx, RESET_TYPE_DISABLE);
 | |
| 	} else {
 | |
| 		efx_start_all(efx);
 | |
| 		netif_device_attach(efx->net_dev);
 | |
| 	}
 | |
| 	return rc;
 | |
| 
 | |
| rollback:
 | |
| 	/* Swap back */
 | |
| 	efx->rxq_entries = old_rxq_entries;
 | |
| 	efx->txq_entries = old_txq_entries;
 | |
| 	for (i = 0; i < efx->n_channels; i++) {
 | |
| 		channel = efx->channel[i];
 | |
| 		efx->channel[i] = other_channel[i];
 | |
| 		other_channel[i] = channel;
 | |
| 	}
 | |
| 	goto out;
 | |
| }
 | |
| 
 | |
| void efx_schedule_slow_fill(struct efx_rx_queue *rx_queue)
 | |
| {
 | |
| 	mod_timer(&rx_queue->slow_fill, jiffies + msecs_to_jiffies(100));
 | |
| }
 | |
| 
 | |
| static const struct efx_channel_type efx_default_channel_type = {
 | |
| 	.pre_probe		= efx_channel_dummy_op_int,
 | |
| 	.post_remove		= efx_channel_dummy_op_void,
 | |
| 	.get_name		= efx_get_channel_name,
 | |
| 	.copy			= efx_copy_channel,
 | |
| 	.keep_eventq		= false,
 | |
| };
 | |
| 
 | |
| int efx_channel_dummy_op_int(struct efx_channel *channel)
 | |
| {
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| void efx_channel_dummy_op_void(struct efx_channel *channel)
 | |
| {
 | |
| }
 | |
| 
 | |
| /**************************************************************************
 | |
|  *
 | |
|  * Port handling
 | |
|  *
 | |
|  **************************************************************************/
 | |
| 
 | |
| /* This ensures that the kernel is kept informed (via
 | |
|  * netif_carrier_on/off) of the link status, and also maintains the
 | |
|  * link status's stop on the port's TX queue.
 | |
|  */
 | |
| void efx_link_status_changed(struct efx_nic *efx)
 | |
| {
 | |
| 	struct efx_link_state *link_state = &efx->link_state;
 | |
| 
 | |
| 	/* SFC Bug 5356: A net_dev notifier is registered, so we must ensure
 | |
| 	 * that no events are triggered between unregister_netdev() and the
 | |
| 	 * driver unloading. A more general condition is that NETDEV_CHANGE
 | |
| 	 * can only be generated between NETDEV_UP and NETDEV_DOWN */
 | |
| 	if (!netif_running(efx->net_dev))
 | |
| 		return;
 | |
| 
 | |
| 	if (link_state->up != netif_carrier_ok(efx->net_dev)) {
 | |
| 		efx->n_link_state_changes++;
 | |
| 
 | |
| 		if (link_state->up)
 | |
| 			netif_carrier_on(efx->net_dev);
 | |
| 		else
 | |
| 			netif_carrier_off(efx->net_dev);
 | |
| 	}
 | |
| 
 | |
| 	/* Status message for kernel log */
 | |
| 	if (link_state->up)
 | |
| 		netif_info(efx, link, efx->net_dev,
 | |
| 			   "link up at %uMbps %s-duplex (MTU %d)\n",
 | |
| 			   link_state->speed, link_state->fd ? "full" : "half",
 | |
| 			   efx->net_dev->mtu);
 | |
| 	else
 | |
| 		netif_info(efx, link, efx->net_dev, "link down\n");
 | |
| }
 | |
| 
 | |
| void efx_link_set_advertising(struct efx_nic *efx, u32 advertising)
 | |
| {
 | |
| 	efx->link_advertising = advertising;
 | |
| 	if (advertising) {
 | |
| 		if (advertising & ADVERTISED_Pause)
 | |
| 			efx->wanted_fc |= (EFX_FC_TX | EFX_FC_RX);
 | |
| 		else
 | |
| 			efx->wanted_fc &= ~(EFX_FC_TX | EFX_FC_RX);
 | |
| 		if (advertising & ADVERTISED_Asym_Pause)
 | |
| 			efx->wanted_fc ^= EFX_FC_TX;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| void efx_link_set_wanted_fc(struct efx_nic *efx, u8 wanted_fc)
 | |
| {
 | |
| 	efx->wanted_fc = wanted_fc;
 | |
| 	if (efx->link_advertising) {
 | |
| 		if (wanted_fc & EFX_FC_RX)
 | |
| 			efx->link_advertising |= (ADVERTISED_Pause |
 | |
| 						  ADVERTISED_Asym_Pause);
 | |
| 		else
 | |
| 			efx->link_advertising &= ~(ADVERTISED_Pause |
 | |
| 						   ADVERTISED_Asym_Pause);
 | |
| 		if (wanted_fc & EFX_FC_TX)
 | |
| 			efx->link_advertising ^= ADVERTISED_Asym_Pause;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static void efx_fini_port(struct efx_nic *efx);
 | |
| 
 | |
| /* Push loopback/power/transmit disable settings to the PHY, and reconfigure
 | |
|  * the MAC appropriately. All other PHY configuration changes are pushed
 | |
|  * through phy_op->set_settings(), and pushed asynchronously to the MAC
 | |
|  * through efx_monitor().
 | |
|  *
 | |
|  * Callers must hold the mac_lock
 | |
|  */
 | |
| int __efx_reconfigure_port(struct efx_nic *efx)
 | |
| {
 | |
| 	enum efx_phy_mode phy_mode;
 | |
| 	int rc;
 | |
| 
 | |
| 	WARN_ON(!mutex_is_locked(&efx->mac_lock));
 | |
| 
 | |
| 	/* Disable PHY transmit in mac level loopbacks */
 | |
| 	phy_mode = efx->phy_mode;
 | |
| 	if (LOOPBACK_INTERNAL(efx))
 | |
| 		efx->phy_mode |= PHY_MODE_TX_DISABLED;
 | |
| 	else
 | |
| 		efx->phy_mode &= ~PHY_MODE_TX_DISABLED;
 | |
| 
 | |
| 	rc = efx->type->reconfigure_port(efx);
 | |
| 
 | |
| 	if (rc)
 | |
| 		efx->phy_mode = phy_mode;
 | |
| 
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| /* Reinitialise the MAC to pick up new PHY settings, even if the port is
 | |
|  * disabled. */
 | |
| int efx_reconfigure_port(struct efx_nic *efx)
 | |
| {
 | |
| 	int rc;
 | |
| 
 | |
| 	EFX_ASSERT_RESET_SERIALISED(efx);
 | |
| 
 | |
| 	mutex_lock(&efx->mac_lock);
 | |
| 	rc = __efx_reconfigure_port(efx);
 | |
| 	mutex_unlock(&efx->mac_lock);
 | |
| 
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| /* Asynchronous work item for changing MAC promiscuity and multicast
 | |
|  * hash.  Avoid a drain/rx_ingress enable by reconfiguring the current
 | |
|  * MAC directly. */
 | |
| static void efx_mac_work(struct work_struct *data)
 | |
| {
 | |
| 	struct efx_nic *efx = container_of(data, struct efx_nic, mac_work);
 | |
| 
 | |
| 	mutex_lock(&efx->mac_lock);
 | |
| 	if (efx->port_enabled)
 | |
| 		efx->type->reconfigure_mac(efx);
 | |
| 	mutex_unlock(&efx->mac_lock);
 | |
| }
 | |
| 
 | |
| static int efx_probe_port(struct efx_nic *efx)
 | |
| {
 | |
| 	int rc;
 | |
| 
 | |
| 	netif_dbg(efx, probe, efx->net_dev, "create port\n");
 | |
| 
 | |
| 	if (phy_flash_cfg)
 | |
| 		efx->phy_mode = PHY_MODE_SPECIAL;
 | |
| 
 | |
| 	/* Connect up MAC/PHY operations table */
 | |
| 	rc = efx->type->probe_port(efx);
 | |
| 	if (rc)
 | |
| 		return rc;
 | |
| 
 | |
| 	/* Initialise MAC address to permanent address */
 | |
| 	ether_addr_copy(efx->net_dev->dev_addr, efx->net_dev->perm_addr);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int efx_init_port(struct efx_nic *efx)
 | |
| {
 | |
| 	int rc;
 | |
| 
 | |
| 	netif_dbg(efx, drv, efx->net_dev, "init port\n");
 | |
| 
 | |
| 	mutex_lock(&efx->mac_lock);
 | |
| 
 | |
| 	rc = efx->phy_op->init(efx);
 | |
| 	if (rc)
 | |
| 		goto fail1;
 | |
| 
 | |
| 	efx->port_initialized = true;
 | |
| 
 | |
| 	/* Reconfigure the MAC before creating dma queues (required for
 | |
| 	 * Falcon/A1 where RX_INGR_EN/TX_DRAIN_EN isn't supported) */
 | |
| 	efx->type->reconfigure_mac(efx);
 | |
| 
 | |
| 	/* Ensure the PHY advertises the correct flow control settings */
 | |
| 	rc = efx->phy_op->reconfigure(efx);
 | |
| 	if (rc)
 | |
| 		goto fail2;
 | |
| 
 | |
| 	mutex_unlock(&efx->mac_lock);
 | |
| 	return 0;
 | |
| 
 | |
| fail2:
 | |
| 	efx->phy_op->fini(efx);
 | |
| fail1:
 | |
| 	mutex_unlock(&efx->mac_lock);
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| static void efx_start_port(struct efx_nic *efx)
 | |
| {
 | |
| 	netif_dbg(efx, ifup, efx->net_dev, "start port\n");
 | |
| 	BUG_ON(efx->port_enabled);
 | |
| 
 | |
| 	mutex_lock(&efx->mac_lock);
 | |
| 	efx->port_enabled = true;
 | |
| 
 | |
| 	/* Ensure MAC ingress/egress is enabled */
 | |
| 	efx->type->reconfigure_mac(efx);
 | |
| 
 | |
| 	mutex_unlock(&efx->mac_lock);
 | |
| }
 | |
| 
 | |
| /* Cancel work for MAC reconfiguration, periodic hardware monitoring
 | |
|  * and the async self-test, wait for them to finish and prevent them
 | |
|  * being scheduled again.  This doesn't cover online resets, which
 | |
|  * should only be cancelled when removing the device.
 | |
|  */
 | |
| static void efx_stop_port(struct efx_nic *efx)
 | |
| {
 | |
| 	netif_dbg(efx, ifdown, efx->net_dev, "stop port\n");
 | |
| 
 | |
| 	EFX_ASSERT_RESET_SERIALISED(efx);
 | |
| 
 | |
| 	mutex_lock(&efx->mac_lock);
 | |
| 	efx->port_enabled = false;
 | |
| 	mutex_unlock(&efx->mac_lock);
 | |
| 
 | |
| 	/* Serialise against efx_set_multicast_list() */
 | |
| 	netif_addr_lock_bh(efx->net_dev);
 | |
| 	netif_addr_unlock_bh(efx->net_dev);
 | |
| 
 | |
| 	cancel_delayed_work_sync(&efx->monitor_work);
 | |
| 	efx_selftest_async_cancel(efx);
 | |
| 	cancel_work_sync(&efx->mac_work);
 | |
| }
 | |
| 
 | |
| static void efx_fini_port(struct efx_nic *efx)
 | |
| {
 | |
| 	netif_dbg(efx, drv, efx->net_dev, "shut down port\n");
 | |
| 
 | |
| 	if (!efx->port_initialized)
 | |
| 		return;
 | |
| 
 | |
| 	efx->phy_op->fini(efx);
 | |
| 	efx->port_initialized = false;
 | |
| 
 | |
| 	efx->link_state.up = false;
 | |
| 	efx_link_status_changed(efx);
 | |
| }
 | |
| 
 | |
| static void efx_remove_port(struct efx_nic *efx)
 | |
| {
 | |
| 	netif_dbg(efx, drv, efx->net_dev, "destroying port\n");
 | |
| 
 | |
| 	efx->type->remove_port(efx);
 | |
| }
 | |
| 
 | |
| /**************************************************************************
 | |
|  *
 | |
|  * NIC handling
 | |
|  *
 | |
|  **************************************************************************/
 | |
| 
 | |
| static LIST_HEAD(efx_primary_list);
 | |
| static LIST_HEAD(efx_unassociated_list);
 | |
| 
 | |
| static bool efx_same_controller(struct efx_nic *left, struct efx_nic *right)
 | |
| {
 | |
| 	return left->type == right->type &&
 | |
| 		left->vpd_sn && right->vpd_sn &&
 | |
| 		!strcmp(left->vpd_sn, right->vpd_sn);
 | |
| }
 | |
| 
 | |
| static void efx_associate(struct efx_nic *efx)
 | |
| {
 | |
| 	struct efx_nic *other, *next;
 | |
| 
 | |
| 	if (efx->primary == efx) {
 | |
| 		/* Adding primary function; look for secondaries */
 | |
| 
 | |
| 		netif_dbg(efx, probe, efx->net_dev, "adding to primary list\n");
 | |
| 		list_add_tail(&efx->node, &efx_primary_list);
 | |
| 
 | |
| 		list_for_each_entry_safe(other, next, &efx_unassociated_list,
 | |
| 					 node) {
 | |
| 			if (efx_same_controller(efx, other)) {
 | |
| 				list_del(&other->node);
 | |
| 				netif_dbg(other, probe, other->net_dev,
 | |
| 					  "moving to secondary list of %s %s\n",
 | |
| 					  pci_name(efx->pci_dev),
 | |
| 					  efx->net_dev->name);
 | |
| 				list_add_tail(&other->node,
 | |
| 					      &efx->secondary_list);
 | |
| 				other->primary = efx;
 | |
| 			}
 | |
| 		}
 | |
| 	} else {
 | |
| 		/* Adding secondary function; look for primary */
 | |
| 
 | |
| 		list_for_each_entry(other, &efx_primary_list, node) {
 | |
| 			if (efx_same_controller(efx, other)) {
 | |
| 				netif_dbg(efx, probe, efx->net_dev,
 | |
| 					  "adding to secondary list of %s %s\n",
 | |
| 					  pci_name(other->pci_dev),
 | |
| 					  other->net_dev->name);
 | |
| 				list_add_tail(&efx->node,
 | |
| 					      &other->secondary_list);
 | |
| 				efx->primary = other;
 | |
| 				return;
 | |
| 			}
 | |
| 		}
 | |
| 
 | |
| 		netif_dbg(efx, probe, efx->net_dev,
 | |
| 			  "adding to unassociated list\n");
 | |
| 		list_add_tail(&efx->node, &efx_unassociated_list);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static void efx_dissociate(struct efx_nic *efx)
 | |
| {
 | |
| 	struct efx_nic *other, *next;
 | |
| 
 | |
| 	list_del(&efx->node);
 | |
| 	efx->primary = NULL;
 | |
| 
 | |
| 	list_for_each_entry_safe(other, next, &efx->secondary_list, node) {
 | |
| 		list_del(&other->node);
 | |
| 		netif_dbg(other, probe, other->net_dev,
 | |
| 			  "moving to unassociated list\n");
 | |
| 		list_add_tail(&other->node, &efx_unassociated_list);
 | |
| 		other->primary = NULL;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /* This configures the PCI device to enable I/O and DMA. */
 | |
| static int efx_init_io(struct efx_nic *efx)
 | |
| {
 | |
| 	struct pci_dev *pci_dev = efx->pci_dev;
 | |
| 	dma_addr_t dma_mask = efx->type->max_dma_mask;
 | |
| 	unsigned int mem_map_size = efx->type->mem_map_size(efx);
 | |
| 	int rc;
 | |
| 
 | |
| 	netif_dbg(efx, probe, efx->net_dev, "initialising I/O\n");
 | |
| 
 | |
| 	rc = pci_enable_device(pci_dev);
 | |
| 	if (rc) {
 | |
| 		netif_err(efx, probe, efx->net_dev,
 | |
| 			  "failed to enable PCI device\n");
 | |
| 		goto fail1;
 | |
| 	}
 | |
| 
 | |
| 	pci_set_master(pci_dev);
 | |
| 
 | |
| 	/* Set the PCI DMA mask.  Try all possibilities from our
 | |
| 	 * genuine mask down to 32 bits, because some architectures
 | |
| 	 * (e.g. x86_64 with iommu_sac_force set) will allow 40 bit
 | |
| 	 * masks event though they reject 46 bit masks.
 | |
| 	 */
 | |
| 	while (dma_mask > 0x7fffffffUL) {
 | |
| 		if (dma_supported(&pci_dev->dev, dma_mask)) {
 | |
| 			rc = dma_set_mask_and_coherent(&pci_dev->dev, dma_mask);
 | |
| 			if (rc == 0)
 | |
| 				break;
 | |
| 		}
 | |
| 		dma_mask >>= 1;
 | |
| 	}
 | |
| 	if (rc) {
 | |
| 		netif_err(efx, probe, efx->net_dev,
 | |
| 			  "could not find a suitable DMA mask\n");
 | |
| 		goto fail2;
 | |
| 	}
 | |
| 	netif_dbg(efx, probe, efx->net_dev,
 | |
| 		  "using DMA mask %llx\n", (unsigned long long) dma_mask);
 | |
| 
 | |
| 	efx->membase_phys = pci_resource_start(efx->pci_dev, EFX_MEM_BAR);
 | |
| 	rc = pci_request_region(pci_dev, EFX_MEM_BAR, "sfc");
 | |
| 	if (rc) {
 | |
| 		netif_err(efx, probe, efx->net_dev,
 | |
| 			  "request for memory BAR failed\n");
 | |
| 		rc = -EIO;
 | |
| 		goto fail3;
 | |
| 	}
 | |
| 	efx->membase = ioremap_nocache(efx->membase_phys, mem_map_size);
 | |
| 	if (!efx->membase) {
 | |
| 		netif_err(efx, probe, efx->net_dev,
 | |
| 			  "could not map memory BAR at %llx+%x\n",
 | |
| 			  (unsigned long long)efx->membase_phys, mem_map_size);
 | |
| 		rc = -ENOMEM;
 | |
| 		goto fail4;
 | |
| 	}
 | |
| 	netif_dbg(efx, probe, efx->net_dev,
 | |
| 		  "memory BAR at %llx+%x (virtual %p)\n",
 | |
| 		  (unsigned long long)efx->membase_phys, mem_map_size,
 | |
| 		  efx->membase);
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
|  fail4:
 | |
| 	pci_release_region(efx->pci_dev, EFX_MEM_BAR);
 | |
|  fail3:
 | |
| 	efx->membase_phys = 0;
 | |
|  fail2:
 | |
| 	pci_disable_device(efx->pci_dev);
 | |
|  fail1:
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| static void efx_fini_io(struct efx_nic *efx)
 | |
| {
 | |
| 	netif_dbg(efx, drv, efx->net_dev, "shutting down I/O\n");
 | |
| 
 | |
| 	if (efx->membase) {
 | |
| 		iounmap(efx->membase);
 | |
| 		efx->membase = NULL;
 | |
| 	}
 | |
| 
 | |
| 	if (efx->membase_phys) {
 | |
| 		pci_release_region(efx->pci_dev, EFX_MEM_BAR);
 | |
| 		efx->membase_phys = 0;
 | |
| 	}
 | |
| 
 | |
| 	pci_disable_device(efx->pci_dev);
 | |
| }
 | |
| 
 | |
| static unsigned int efx_wanted_parallelism(struct efx_nic *efx)
 | |
| {
 | |
| 	cpumask_var_t thread_mask;
 | |
| 	unsigned int count;
 | |
| 	int cpu;
 | |
| 
 | |
| 	if (rss_cpus) {
 | |
| 		count = rss_cpus;
 | |
| 	} else {
 | |
| 		if (unlikely(!zalloc_cpumask_var(&thread_mask, GFP_KERNEL))) {
 | |
| 			netif_warn(efx, probe, efx->net_dev,
 | |
| 				   "RSS disabled due to allocation failure\n");
 | |
| 			return 1;
 | |
| 		}
 | |
| 
 | |
| 		count = 0;
 | |
| 		for_each_online_cpu(cpu) {
 | |
| 			if (!cpumask_test_cpu(cpu, thread_mask)) {
 | |
| 				++count;
 | |
| 				cpumask_or(thread_mask, thread_mask,
 | |
| 					   topology_thread_cpumask(cpu));
 | |
| 			}
 | |
| 		}
 | |
| 
 | |
| 		free_cpumask_var(thread_mask);
 | |
| 	}
 | |
| 
 | |
| 	/* If RSS is requested for the PF *and* VFs then we can't write RSS
 | |
| 	 * table entries that are inaccessible to VFs
 | |
| 	 */
 | |
| 	if (efx->type->sriov_wanted(efx) && efx_vf_size(efx) > 1 &&
 | |
| 	    count > efx_vf_size(efx)) {
 | |
| 		netif_warn(efx, probe, efx->net_dev,
 | |
| 			   "Reducing number of RSS channels from %u to %u for "
 | |
| 			   "VF support. Increase vf-msix-limit to use more "
 | |
| 			   "channels on the PF.\n",
 | |
| 			   count, efx_vf_size(efx));
 | |
| 		count = efx_vf_size(efx);
 | |
| 	}
 | |
| 
 | |
| 	return count;
 | |
| }
 | |
| 
 | |
| /* Probe the number and type of interrupts we are able to obtain, and
 | |
|  * the resulting numbers of channels and RX queues.
 | |
|  */
 | |
| static int efx_probe_interrupts(struct efx_nic *efx)
 | |
| {
 | |
| 	unsigned int extra_channels = 0;
 | |
| 	unsigned int i, j;
 | |
| 	int rc;
 | |
| 
 | |
| 	for (i = 0; i < EFX_MAX_EXTRA_CHANNELS; i++)
 | |
| 		if (efx->extra_channel_type[i])
 | |
| 			++extra_channels;
 | |
| 
 | |
| 	if (efx->interrupt_mode == EFX_INT_MODE_MSIX) {
 | |
| 		struct msix_entry xentries[EFX_MAX_CHANNELS];
 | |
| 		unsigned int n_channels;
 | |
| 
 | |
| 		n_channels = efx_wanted_parallelism(efx);
 | |
| 		if (separate_tx_channels)
 | |
| 			n_channels *= 2;
 | |
| 		n_channels += extra_channels;
 | |
| 		n_channels = min(n_channels, efx->max_channels);
 | |
| 
 | |
| 		for (i = 0; i < n_channels; i++)
 | |
| 			xentries[i].entry = i;
 | |
| 		rc = pci_enable_msix_range(efx->pci_dev,
 | |
| 					   xentries, 1, n_channels);
 | |
| 		if (rc < 0) {
 | |
| 			/* Fall back to single channel MSI */
 | |
| 			efx->interrupt_mode = EFX_INT_MODE_MSI;
 | |
| 			netif_err(efx, drv, efx->net_dev,
 | |
| 				  "could not enable MSI-X\n");
 | |
| 		} else if (rc < n_channels) {
 | |
| 			netif_err(efx, drv, efx->net_dev,
 | |
| 				  "WARNING: Insufficient MSI-X vectors"
 | |
| 				  " available (%d < %u).\n", rc, n_channels);
 | |
| 			netif_err(efx, drv, efx->net_dev,
 | |
| 				  "WARNING: Performance may be reduced.\n");
 | |
| 			n_channels = rc;
 | |
| 		}
 | |
| 
 | |
| 		if (rc > 0) {
 | |
| 			efx->n_channels = n_channels;
 | |
| 			if (n_channels > extra_channels)
 | |
| 				n_channels -= extra_channels;
 | |
| 			if (separate_tx_channels) {
 | |
| 				efx->n_tx_channels = max(n_channels / 2, 1U);
 | |
| 				efx->n_rx_channels = max(n_channels -
 | |
| 							 efx->n_tx_channels,
 | |
| 							 1U);
 | |
| 			} else {
 | |
| 				efx->n_tx_channels = n_channels;
 | |
| 				efx->n_rx_channels = n_channels;
 | |
| 			}
 | |
| 			for (i = 0; i < efx->n_channels; i++)
 | |
| 				efx_get_channel(efx, i)->irq =
 | |
| 					xentries[i].vector;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/* Try single interrupt MSI */
 | |
| 	if (efx->interrupt_mode == EFX_INT_MODE_MSI) {
 | |
| 		efx->n_channels = 1;
 | |
| 		efx->n_rx_channels = 1;
 | |
| 		efx->n_tx_channels = 1;
 | |
| 		rc = pci_enable_msi(efx->pci_dev);
 | |
| 		if (rc == 0) {
 | |
| 			efx_get_channel(efx, 0)->irq = efx->pci_dev->irq;
 | |
| 		} else {
 | |
| 			netif_err(efx, drv, efx->net_dev,
 | |
| 				  "could not enable MSI\n");
 | |
| 			efx->interrupt_mode = EFX_INT_MODE_LEGACY;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/* Assume legacy interrupts */
 | |
| 	if (efx->interrupt_mode == EFX_INT_MODE_LEGACY) {
 | |
| 		efx->n_channels = 1 + (separate_tx_channels ? 1 : 0);
 | |
| 		efx->n_rx_channels = 1;
 | |
| 		efx->n_tx_channels = 1;
 | |
| 		efx->legacy_irq = efx->pci_dev->irq;
 | |
| 	}
 | |
| 
 | |
| 	/* Assign extra channels if possible */
 | |
| 	j = efx->n_channels;
 | |
| 	for (i = 0; i < EFX_MAX_EXTRA_CHANNELS; i++) {
 | |
| 		if (!efx->extra_channel_type[i])
 | |
| 			continue;
 | |
| 		if (efx->interrupt_mode != EFX_INT_MODE_MSIX ||
 | |
| 		    efx->n_channels <= extra_channels) {
 | |
| 			efx->extra_channel_type[i]->handle_no_channel(efx);
 | |
| 		} else {
 | |
| 			--j;
 | |
| 			efx_get_channel(efx, j)->type =
 | |
| 				efx->extra_channel_type[i];
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/* RSS might be usable on VFs even if it is disabled on the PF */
 | |
| 
 | |
| 	efx->rss_spread = ((efx->n_rx_channels > 1 ||
 | |
| 			    !efx->type->sriov_wanted(efx)) ?
 | |
| 			   efx->n_rx_channels : efx_vf_size(efx));
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int efx_soft_enable_interrupts(struct efx_nic *efx)
 | |
| {
 | |
| 	struct efx_channel *channel, *end_channel;
 | |
| 	int rc;
 | |
| 
 | |
| 	BUG_ON(efx->state == STATE_DISABLED);
 | |
| 
 | |
| 	efx->irq_soft_enabled = true;
 | |
| 	smp_wmb();
 | |
| 
 | |
| 	efx_for_each_channel(channel, efx) {
 | |
| 		if (!channel->type->keep_eventq) {
 | |
| 			rc = efx_init_eventq(channel);
 | |
| 			if (rc)
 | |
| 				goto fail;
 | |
| 		}
 | |
| 		efx_start_eventq(channel);
 | |
| 	}
 | |
| 
 | |
| 	efx_mcdi_mode_event(efx);
 | |
| 
 | |
| 	return 0;
 | |
| fail:
 | |
| 	end_channel = channel;
 | |
| 	efx_for_each_channel(channel, efx) {
 | |
| 		if (channel == end_channel)
 | |
| 			break;
 | |
| 		efx_stop_eventq(channel);
 | |
| 		if (!channel->type->keep_eventq)
 | |
| 			efx_fini_eventq(channel);
 | |
| 	}
 | |
| 
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| static void efx_soft_disable_interrupts(struct efx_nic *efx)
 | |
| {
 | |
| 	struct efx_channel *channel;
 | |
| 
 | |
| 	if (efx->state == STATE_DISABLED)
 | |
| 		return;
 | |
| 
 | |
| 	efx_mcdi_mode_poll(efx);
 | |
| 
 | |
| 	efx->irq_soft_enabled = false;
 | |
| 	smp_wmb();
 | |
| 
 | |
| 	if (efx->legacy_irq)
 | |
| 		synchronize_irq(efx->legacy_irq);
 | |
| 
 | |
| 	efx_for_each_channel(channel, efx) {
 | |
| 		if (channel->irq)
 | |
| 			synchronize_irq(channel->irq);
 | |
| 
 | |
| 		efx_stop_eventq(channel);
 | |
| 		if (!channel->type->keep_eventq)
 | |
| 			efx_fini_eventq(channel);
 | |
| 	}
 | |
| 
 | |
| 	/* Flush the asynchronous MCDI request queue */
 | |
| 	efx_mcdi_flush_async(efx);
 | |
| }
 | |
| 
 | |
| static int efx_enable_interrupts(struct efx_nic *efx)
 | |
| {
 | |
| 	struct efx_channel *channel, *end_channel;
 | |
| 	int rc;
 | |
| 
 | |
| 	BUG_ON(efx->state == STATE_DISABLED);
 | |
| 
 | |
| 	if (efx->eeh_disabled_legacy_irq) {
 | |
| 		enable_irq(efx->legacy_irq);
 | |
| 		efx->eeh_disabled_legacy_irq = false;
 | |
| 	}
 | |
| 
 | |
| 	efx->type->irq_enable_master(efx);
 | |
| 
 | |
| 	efx_for_each_channel(channel, efx) {
 | |
| 		if (channel->type->keep_eventq) {
 | |
| 			rc = efx_init_eventq(channel);
 | |
| 			if (rc)
 | |
| 				goto fail;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	rc = efx_soft_enable_interrupts(efx);
 | |
| 	if (rc)
 | |
| 		goto fail;
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| fail:
 | |
| 	end_channel = channel;
 | |
| 	efx_for_each_channel(channel, efx) {
 | |
| 		if (channel == end_channel)
 | |
| 			break;
 | |
| 		if (channel->type->keep_eventq)
 | |
| 			efx_fini_eventq(channel);
 | |
| 	}
 | |
| 
 | |
| 	efx->type->irq_disable_non_ev(efx);
 | |
| 
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| static void efx_disable_interrupts(struct efx_nic *efx)
 | |
| {
 | |
| 	struct efx_channel *channel;
 | |
| 
 | |
| 	efx_soft_disable_interrupts(efx);
 | |
| 
 | |
| 	efx_for_each_channel(channel, efx) {
 | |
| 		if (channel->type->keep_eventq)
 | |
| 			efx_fini_eventq(channel);
 | |
| 	}
 | |
| 
 | |
| 	efx->type->irq_disable_non_ev(efx);
 | |
| }
 | |
| 
 | |
| static void efx_remove_interrupts(struct efx_nic *efx)
 | |
| {
 | |
| 	struct efx_channel *channel;
 | |
| 
 | |
| 	/* Remove MSI/MSI-X interrupts */
 | |
| 	efx_for_each_channel(channel, efx)
 | |
| 		channel->irq = 0;
 | |
| 	pci_disable_msi(efx->pci_dev);
 | |
| 	pci_disable_msix(efx->pci_dev);
 | |
| 
 | |
| 	/* Remove legacy interrupt */
 | |
| 	efx->legacy_irq = 0;
 | |
| }
 | |
| 
 | |
| static void efx_set_channels(struct efx_nic *efx)
 | |
| {
 | |
| 	struct efx_channel *channel;
 | |
| 	struct efx_tx_queue *tx_queue;
 | |
| 
 | |
| 	efx->tx_channel_offset =
 | |
| 		separate_tx_channels ? efx->n_channels - efx->n_tx_channels : 0;
 | |
| 
 | |
| 	/* We need to mark which channels really have RX and TX
 | |
| 	 * queues, and adjust the TX queue numbers if we have separate
 | |
| 	 * RX-only and TX-only channels.
 | |
| 	 */
 | |
| 	efx_for_each_channel(channel, efx) {
 | |
| 		if (channel->channel < efx->n_rx_channels)
 | |
| 			channel->rx_queue.core_index = channel->channel;
 | |
| 		else
 | |
| 			channel->rx_queue.core_index = -1;
 | |
| 
 | |
| 		efx_for_each_channel_tx_queue(tx_queue, channel)
 | |
| 			tx_queue->queue -= (efx->tx_channel_offset *
 | |
| 					    EFX_TXQ_TYPES);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static int efx_probe_nic(struct efx_nic *efx)
 | |
| {
 | |
| 	size_t i;
 | |
| 	int rc;
 | |
| 
 | |
| 	netif_dbg(efx, probe, efx->net_dev, "creating NIC\n");
 | |
| 
 | |
| 	/* Carry out hardware-type specific initialisation */
 | |
| 	rc = efx->type->probe(efx);
 | |
| 	if (rc)
 | |
| 		return rc;
 | |
| 
 | |
| 	/* Determine the number of channels and queues by trying to hook
 | |
| 	 * in MSI-X interrupts. */
 | |
| 	rc = efx_probe_interrupts(efx);
 | |
| 	if (rc)
 | |
| 		goto fail1;
 | |
| 
 | |
| 	efx_set_channels(efx);
 | |
| 
 | |
| 	rc = efx->type->dimension_resources(efx);
 | |
| 	if (rc)
 | |
| 		goto fail2;
 | |
| 
 | |
| 	if (efx->n_channels > 1)
 | |
| 		netdev_rss_key_fill(&efx->rx_hash_key, sizeof(efx->rx_hash_key));
 | |
| 	for (i = 0; i < ARRAY_SIZE(efx->rx_indir_table); i++)
 | |
| 		efx->rx_indir_table[i] =
 | |
| 			ethtool_rxfh_indir_default(i, efx->rss_spread);
 | |
| 
 | |
| 	netif_set_real_num_tx_queues(efx->net_dev, efx->n_tx_channels);
 | |
| 	netif_set_real_num_rx_queues(efx->net_dev, efx->n_rx_channels);
 | |
| 
 | |
| 	/* Initialise the interrupt moderation settings */
 | |
| 	efx_init_irq_moderation(efx, tx_irq_mod_usec, rx_irq_mod_usec, true,
 | |
| 				true);
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| fail2:
 | |
| 	efx_remove_interrupts(efx);
 | |
| fail1:
 | |
| 	efx->type->remove(efx);
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| static void efx_remove_nic(struct efx_nic *efx)
 | |
| {
 | |
| 	netif_dbg(efx, drv, efx->net_dev, "destroying NIC\n");
 | |
| 
 | |
| 	efx_remove_interrupts(efx);
 | |
| 	efx->type->remove(efx);
 | |
| }
 | |
| 
 | |
| static int efx_probe_filters(struct efx_nic *efx)
 | |
| {
 | |
| 	int rc;
 | |
| 
 | |
| 	spin_lock_init(&efx->filter_lock);
 | |
| 
 | |
| 	rc = efx->type->filter_table_probe(efx);
 | |
| 	if (rc)
 | |
| 		return rc;
 | |
| 
 | |
| #ifdef CONFIG_RFS_ACCEL
 | |
| 	if (efx->type->offload_features & NETIF_F_NTUPLE) {
 | |
| 		efx->rps_flow_id = kcalloc(efx->type->max_rx_ip_filters,
 | |
| 					   sizeof(*efx->rps_flow_id),
 | |
| 					   GFP_KERNEL);
 | |
| 		if (!efx->rps_flow_id) {
 | |
| 			efx->type->filter_table_remove(efx);
 | |
| 			return -ENOMEM;
 | |
| 		}
 | |
| 	}
 | |
| #endif
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void efx_remove_filters(struct efx_nic *efx)
 | |
| {
 | |
| #ifdef CONFIG_RFS_ACCEL
 | |
| 	kfree(efx->rps_flow_id);
 | |
| #endif
 | |
| 	efx->type->filter_table_remove(efx);
 | |
| }
 | |
| 
 | |
| static void efx_restore_filters(struct efx_nic *efx)
 | |
| {
 | |
| 	efx->type->filter_table_restore(efx);
 | |
| }
 | |
| 
 | |
| /**************************************************************************
 | |
|  *
 | |
|  * NIC startup/shutdown
 | |
|  *
 | |
|  *************************************************************************/
 | |
| 
 | |
| static int efx_probe_all(struct efx_nic *efx)
 | |
| {
 | |
| 	int rc;
 | |
| 
 | |
| 	rc = efx_probe_nic(efx);
 | |
| 	if (rc) {
 | |
| 		netif_err(efx, probe, efx->net_dev, "failed to create NIC\n");
 | |
| 		goto fail1;
 | |
| 	}
 | |
| 
 | |
| 	rc = efx_probe_port(efx);
 | |
| 	if (rc) {
 | |
| 		netif_err(efx, probe, efx->net_dev, "failed to create port\n");
 | |
| 		goto fail2;
 | |
| 	}
 | |
| 
 | |
| 	BUILD_BUG_ON(EFX_DEFAULT_DMAQ_SIZE < EFX_RXQ_MIN_ENT);
 | |
| 	if (WARN_ON(EFX_DEFAULT_DMAQ_SIZE < EFX_TXQ_MIN_ENT(efx))) {
 | |
| 		rc = -EINVAL;
 | |
| 		goto fail3;
 | |
| 	}
 | |
| 	efx->rxq_entries = efx->txq_entries = EFX_DEFAULT_DMAQ_SIZE;
 | |
| 
 | |
| 	rc = efx_probe_filters(efx);
 | |
| 	if (rc) {
 | |
| 		netif_err(efx, probe, efx->net_dev,
 | |
| 			  "failed to create filter tables\n");
 | |
| 		goto fail3;
 | |
| 	}
 | |
| 
 | |
| 	rc = efx_probe_channels(efx);
 | |
| 	if (rc)
 | |
| 		goto fail4;
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
|  fail4:
 | |
| 	efx_remove_filters(efx);
 | |
|  fail3:
 | |
| 	efx_remove_port(efx);
 | |
|  fail2:
 | |
| 	efx_remove_nic(efx);
 | |
|  fail1:
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| /* If the interface is supposed to be running but is not, start
 | |
|  * the hardware and software data path, regular activity for the port
 | |
|  * (MAC statistics, link polling, etc.) and schedule the port to be
 | |
|  * reconfigured.  Interrupts must already be enabled.  This function
 | |
|  * is safe to call multiple times, so long as the NIC is not disabled.
 | |
|  * Requires the RTNL lock.
 | |
|  */
 | |
| static void efx_start_all(struct efx_nic *efx)
 | |
| {
 | |
| 	EFX_ASSERT_RESET_SERIALISED(efx);
 | |
| 	BUG_ON(efx->state == STATE_DISABLED);
 | |
| 
 | |
| 	/* Check that it is appropriate to restart the interface. All
 | |
| 	 * of these flags are safe to read under just the rtnl lock */
 | |
| 	if (efx->port_enabled || !netif_running(efx->net_dev) ||
 | |
| 	    efx->reset_pending)
 | |
| 		return;
 | |
| 
 | |
| 	efx_start_port(efx);
 | |
| 	efx_start_datapath(efx);
 | |
| 
 | |
| 	/* Start the hardware monitor if there is one */
 | |
| 	if (efx->type->monitor != NULL)
 | |
| 		queue_delayed_work(efx->workqueue, &efx->monitor_work,
 | |
| 				   efx_monitor_interval);
 | |
| 
 | |
| 	/* If link state detection is normally event-driven, we have
 | |
| 	 * to poll now because we could have missed a change
 | |
| 	 */
 | |
| 	if (efx_nic_rev(efx) >= EFX_REV_SIENA_A0) {
 | |
| 		mutex_lock(&efx->mac_lock);
 | |
| 		if (efx->phy_op->poll(efx))
 | |
| 			efx_link_status_changed(efx);
 | |
| 		mutex_unlock(&efx->mac_lock);
 | |
| 	}
 | |
| 
 | |
| 	efx->type->start_stats(efx);
 | |
| 	efx->type->pull_stats(efx);
 | |
| 	spin_lock_bh(&efx->stats_lock);
 | |
| 	efx->type->update_stats(efx, NULL, NULL);
 | |
| 	spin_unlock_bh(&efx->stats_lock);
 | |
| }
 | |
| 
 | |
| /* Quiesce the hardware and software data path, and regular activity
 | |
|  * for the port without bringing the link down.  Safe to call multiple
 | |
|  * times with the NIC in almost any state, but interrupts should be
 | |
|  * enabled.  Requires the RTNL lock.
 | |
|  */
 | |
| static void efx_stop_all(struct efx_nic *efx)
 | |
| {
 | |
| 	EFX_ASSERT_RESET_SERIALISED(efx);
 | |
| 
 | |
| 	/* port_enabled can be read safely under the rtnl lock */
 | |
| 	if (!efx->port_enabled)
 | |
| 		return;
 | |
| 
 | |
| 	/* update stats before we go down so we can accurately count
 | |
| 	 * rx_nodesc_drops
 | |
| 	 */
 | |
| 	efx->type->pull_stats(efx);
 | |
| 	spin_lock_bh(&efx->stats_lock);
 | |
| 	efx->type->update_stats(efx, NULL, NULL);
 | |
| 	spin_unlock_bh(&efx->stats_lock);
 | |
| 	efx->type->stop_stats(efx);
 | |
| 	efx_stop_port(efx);
 | |
| 
 | |
| 	/* Stop the kernel transmit interface.  This is only valid if
 | |
| 	 * the device is stopped or detached; otherwise the watchdog
 | |
| 	 * may fire immediately.
 | |
| 	 */
 | |
| 	WARN_ON(netif_running(efx->net_dev) &&
 | |
| 		netif_device_present(efx->net_dev));
 | |
| 	netif_tx_disable(efx->net_dev);
 | |
| 
 | |
| 	efx_stop_datapath(efx);
 | |
| }
 | |
| 
 | |
| static void efx_remove_all(struct efx_nic *efx)
 | |
| {
 | |
| 	efx_remove_channels(efx);
 | |
| 	efx_remove_filters(efx);
 | |
| 	efx_remove_port(efx);
 | |
| 	efx_remove_nic(efx);
 | |
| }
 | |
| 
 | |
| /**************************************************************************
 | |
|  *
 | |
|  * Interrupt moderation
 | |
|  *
 | |
|  **************************************************************************/
 | |
| 
 | |
| static unsigned int irq_mod_ticks(unsigned int usecs, unsigned int quantum_ns)
 | |
| {
 | |
| 	if (usecs == 0)
 | |
| 		return 0;
 | |
| 	if (usecs * 1000 < quantum_ns)
 | |
| 		return 1; /* never round down to 0 */
 | |
| 	return usecs * 1000 / quantum_ns;
 | |
| }
 | |
| 
 | |
| /* Set interrupt moderation parameters */
 | |
| int efx_init_irq_moderation(struct efx_nic *efx, unsigned int tx_usecs,
 | |
| 			    unsigned int rx_usecs, bool rx_adaptive,
 | |
| 			    bool rx_may_override_tx)
 | |
| {
 | |
| 	struct efx_channel *channel;
 | |
| 	unsigned int irq_mod_max = DIV_ROUND_UP(efx->type->timer_period_max *
 | |
| 						efx->timer_quantum_ns,
 | |
| 						1000);
 | |
| 	unsigned int tx_ticks;
 | |
| 	unsigned int rx_ticks;
 | |
| 
 | |
| 	EFX_ASSERT_RESET_SERIALISED(efx);
 | |
| 
 | |
| 	if (tx_usecs > irq_mod_max || rx_usecs > irq_mod_max)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	tx_ticks = irq_mod_ticks(tx_usecs, efx->timer_quantum_ns);
 | |
| 	rx_ticks = irq_mod_ticks(rx_usecs, efx->timer_quantum_ns);
 | |
| 
 | |
| 	if (tx_ticks != rx_ticks && efx->tx_channel_offset == 0 &&
 | |
| 	    !rx_may_override_tx) {
 | |
| 		netif_err(efx, drv, efx->net_dev, "Channels are shared. "
 | |
| 			  "RX and TX IRQ moderation must be equal\n");
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	efx->irq_rx_adaptive = rx_adaptive;
 | |
| 	efx->irq_rx_moderation = rx_ticks;
 | |
| 	efx_for_each_channel(channel, efx) {
 | |
| 		if (efx_channel_has_rx_queue(channel))
 | |
| 			channel->irq_moderation = rx_ticks;
 | |
| 		else if (efx_channel_has_tx_queues(channel))
 | |
| 			channel->irq_moderation = tx_ticks;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| void efx_get_irq_moderation(struct efx_nic *efx, unsigned int *tx_usecs,
 | |
| 			    unsigned int *rx_usecs, bool *rx_adaptive)
 | |
| {
 | |
| 	/* We must round up when converting ticks to microseconds
 | |
| 	 * because we round down when converting the other way.
 | |
| 	 */
 | |
| 
 | |
| 	*rx_adaptive = efx->irq_rx_adaptive;
 | |
| 	*rx_usecs = DIV_ROUND_UP(efx->irq_rx_moderation *
 | |
| 				 efx->timer_quantum_ns,
 | |
| 				 1000);
 | |
| 
 | |
| 	/* If channels are shared between RX and TX, so is IRQ
 | |
| 	 * moderation.  Otherwise, IRQ moderation is the same for all
 | |
| 	 * TX channels and is not adaptive.
 | |
| 	 */
 | |
| 	if (efx->tx_channel_offset == 0)
 | |
| 		*tx_usecs = *rx_usecs;
 | |
| 	else
 | |
| 		*tx_usecs = DIV_ROUND_UP(
 | |
| 			efx->channel[efx->tx_channel_offset]->irq_moderation *
 | |
| 			efx->timer_quantum_ns,
 | |
| 			1000);
 | |
| }
 | |
| 
 | |
| /**************************************************************************
 | |
|  *
 | |
|  * Hardware monitor
 | |
|  *
 | |
|  **************************************************************************/
 | |
| 
 | |
| /* Run periodically off the general workqueue */
 | |
| static void efx_monitor(struct work_struct *data)
 | |
| {
 | |
| 	struct efx_nic *efx = container_of(data, struct efx_nic,
 | |
| 					   monitor_work.work);
 | |
| 
 | |
| 	netif_vdbg(efx, timer, efx->net_dev,
 | |
| 		   "hardware monitor executing on CPU %d\n",
 | |
| 		   raw_smp_processor_id());
 | |
| 	BUG_ON(efx->type->monitor == NULL);
 | |
| 
 | |
| 	/* If the mac_lock is already held then it is likely a port
 | |
| 	 * reconfiguration is already in place, which will likely do
 | |
| 	 * most of the work of monitor() anyway. */
 | |
| 	if (mutex_trylock(&efx->mac_lock)) {
 | |
| 		if (efx->port_enabled)
 | |
| 			efx->type->monitor(efx);
 | |
| 		mutex_unlock(&efx->mac_lock);
 | |
| 	}
 | |
| 
 | |
| 	queue_delayed_work(efx->workqueue, &efx->monitor_work,
 | |
| 			   efx_monitor_interval);
 | |
| }
 | |
| 
 | |
| /**************************************************************************
 | |
|  *
 | |
|  * ioctls
 | |
|  *
 | |
|  *************************************************************************/
 | |
| 
 | |
| /* Net device ioctl
 | |
|  * Context: process, rtnl_lock() held.
 | |
|  */
 | |
| static int efx_ioctl(struct net_device *net_dev, struct ifreq *ifr, int cmd)
 | |
| {
 | |
| 	struct efx_nic *efx = netdev_priv(net_dev);
 | |
| 	struct mii_ioctl_data *data = if_mii(ifr);
 | |
| 
 | |
| 	if (cmd == SIOCSHWTSTAMP)
 | |
| 		return efx_ptp_set_ts_config(efx, ifr);
 | |
| 	if (cmd == SIOCGHWTSTAMP)
 | |
| 		return efx_ptp_get_ts_config(efx, ifr);
 | |
| 
 | |
| 	/* Convert phy_id from older PRTAD/DEVAD format */
 | |
| 	if ((cmd == SIOCGMIIREG || cmd == SIOCSMIIREG) &&
 | |
| 	    (data->phy_id & 0xfc00) == 0x0400)
 | |
| 		data->phy_id ^= MDIO_PHY_ID_C45 | 0x0400;
 | |
| 
 | |
| 	return mdio_mii_ioctl(&efx->mdio, data, cmd);
 | |
| }
 | |
| 
 | |
| /**************************************************************************
 | |
|  *
 | |
|  * NAPI interface
 | |
|  *
 | |
|  **************************************************************************/
 | |
| 
 | |
| static void efx_init_napi_channel(struct efx_channel *channel)
 | |
| {
 | |
| 	struct efx_nic *efx = channel->efx;
 | |
| 
 | |
| 	channel->napi_dev = efx->net_dev;
 | |
| 	netif_napi_add(channel->napi_dev, &channel->napi_str,
 | |
| 		       efx_poll, napi_weight);
 | |
| 	napi_hash_add(&channel->napi_str);
 | |
| 	efx_channel_init_lock(channel);
 | |
| }
 | |
| 
 | |
| static void efx_init_napi(struct efx_nic *efx)
 | |
| {
 | |
| 	struct efx_channel *channel;
 | |
| 
 | |
| 	efx_for_each_channel(channel, efx)
 | |
| 		efx_init_napi_channel(channel);
 | |
| }
 | |
| 
 | |
| static void efx_fini_napi_channel(struct efx_channel *channel)
 | |
| {
 | |
| 	if (channel->napi_dev) {
 | |
| 		netif_napi_del(&channel->napi_str);
 | |
| 		napi_hash_del(&channel->napi_str);
 | |
| 	}
 | |
| 	channel->napi_dev = NULL;
 | |
| }
 | |
| 
 | |
| static void efx_fini_napi(struct efx_nic *efx)
 | |
| {
 | |
| 	struct efx_channel *channel;
 | |
| 
 | |
| 	efx_for_each_channel(channel, efx)
 | |
| 		efx_fini_napi_channel(channel);
 | |
| }
 | |
| 
 | |
| /**************************************************************************
 | |
|  *
 | |
|  * Kernel netpoll interface
 | |
|  *
 | |
|  *************************************************************************/
 | |
| 
 | |
| #ifdef CONFIG_NET_POLL_CONTROLLER
 | |
| 
 | |
| /* Although in the common case interrupts will be disabled, this is not
 | |
|  * guaranteed. However, all our work happens inside the NAPI callback,
 | |
|  * so no locking is required.
 | |
|  */
 | |
| static void efx_netpoll(struct net_device *net_dev)
 | |
| {
 | |
| 	struct efx_nic *efx = netdev_priv(net_dev);
 | |
| 	struct efx_channel *channel;
 | |
| 
 | |
| 	efx_for_each_channel(channel, efx)
 | |
| 		efx_schedule_channel(channel);
 | |
| }
 | |
| 
 | |
| #endif
 | |
| 
 | |
| #ifdef CONFIG_NET_RX_BUSY_POLL
 | |
| static int efx_busy_poll(struct napi_struct *napi)
 | |
| {
 | |
| 	struct efx_channel *channel =
 | |
| 		container_of(napi, struct efx_channel, napi_str);
 | |
| 	struct efx_nic *efx = channel->efx;
 | |
| 	int budget = 4;
 | |
| 	int old_rx_packets, rx_packets;
 | |
| 
 | |
| 	if (!netif_running(efx->net_dev))
 | |
| 		return LL_FLUSH_FAILED;
 | |
| 
 | |
| 	if (!efx_channel_lock_poll(channel))
 | |
| 		return LL_FLUSH_BUSY;
 | |
| 
 | |
| 	old_rx_packets = channel->rx_queue.rx_packets;
 | |
| 	efx_process_channel(channel, budget);
 | |
| 
 | |
| 	rx_packets = channel->rx_queue.rx_packets - old_rx_packets;
 | |
| 
 | |
| 	/* There is no race condition with NAPI here.
 | |
| 	 * NAPI will automatically be rescheduled if it yielded during busy
 | |
| 	 * polling, because it was not able to take the lock and thus returned
 | |
| 	 * the full budget.
 | |
| 	 */
 | |
| 	efx_channel_unlock_poll(channel);
 | |
| 
 | |
| 	return rx_packets;
 | |
| }
 | |
| #endif
 | |
| 
 | |
| /**************************************************************************
 | |
|  *
 | |
|  * Kernel net device interface
 | |
|  *
 | |
|  *************************************************************************/
 | |
| 
 | |
| /* Context: process, rtnl_lock() held. */
 | |
| static int efx_net_open(struct net_device *net_dev)
 | |
| {
 | |
| 	struct efx_nic *efx = netdev_priv(net_dev);
 | |
| 	int rc;
 | |
| 
 | |
| 	netif_dbg(efx, ifup, efx->net_dev, "opening device on CPU %d\n",
 | |
| 		  raw_smp_processor_id());
 | |
| 
 | |
| 	rc = efx_check_disabled(efx);
 | |
| 	if (rc)
 | |
| 		return rc;
 | |
| 	if (efx->phy_mode & PHY_MODE_SPECIAL)
 | |
| 		return -EBUSY;
 | |
| 	if (efx_mcdi_poll_reboot(efx) && efx_reset(efx, RESET_TYPE_ALL))
 | |
| 		return -EIO;
 | |
| 
 | |
| 	/* Notify the kernel of the link state polled during driver load,
 | |
| 	 * before the monitor starts running */
 | |
| 	efx_link_status_changed(efx);
 | |
| 
 | |
| 	efx_start_all(efx);
 | |
| 	efx_selftest_async_start(efx);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /* Context: process, rtnl_lock() held.
 | |
|  * Note that the kernel will ignore our return code; this method
 | |
|  * should really be a void.
 | |
|  */
 | |
| static int efx_net_stop(struct net_device *net_dev)
 | |
| {
 | |
| 	struct efx_nic *efx = netdev_priv(net_dev);
 | |
| 
 | |
| 	netif_dbg(efx, ifdown, efx->net_dev, "closing on CPU %d\n",
 | |
| 		  raw_smp_processor_id());
 | |
| 
 | |
| 	/* Stop the device and flush all the channels */
 | |
| 	efx_stop_all(efx);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /* Context: process, dev_base_lock or RTNL held, non-blocking. */
 | |
| static struct rtnl_link_stats64 *efx_net_stats(struct net_device *net_dev,
 | |
| 					       struct rtnl_link_stats64 *stats)
 | |
| {
 | |
| 	struct efx_nic *efx = netdev_priv(net_dev);
 | |
| 
 | |
| 	spin_lock_bh(&efx->stats_lock);
 | |
| 	efx->type->update_stats(efx, NULL, stats);
 | |
| 	spin_unlock_bh(&efx->stats_lock);
 | |
| 
 | |
| 	return stats;
 | |
| }
 | |
| 
 | |
| /* Context: netif_tx_lock held, BHs disabled. */
 | |
| static void efx_watchdog(struct net_device *net_dev)
 | |
| {
 | |
| 	struct efx_nic *efx = netdev_priv(net_dev);
 | |
| 
 | |
| 	netif_err(efx, tx_err, efx->net_dev,
 | |
| 		  "TX stuck with port_enabled=%d: resetting channels\n",
 | |
| 		  efx->port_enabled);
 | |
| 
 | |
| 	efx_schedule_reset(efx, RESET_TYPE_TX_WATCHDOG);
 | |
| }
 | |
| 
 | |
| 
 | |
| /* Context: process, rtnl_lock() held. */
 | |
| static int efx_change_mtu(struct net_device *net_dev, int new_mtu)
 | |
| {
 | |
| 	struct efx_nic *efx = netdev_priv(net_dev);
 | |
| 	int rc;
 | |
| 
 | |
| 	rc = efx_check_disabled(efx);
 | |
| 	if (rc)
 | |
| 		return rc;
 | |
| 	if (new_mtu > EFX_MAX_MTU)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	netif_dbg(efx, drv, efx->net_dev, "changing MTU to %d\n", new_mtu);
 | |
| 
 | |
| 	efx_device_detach_sync(efx);
 | |
| 	efx_stop_all(efx);
 | |
| 
 | |
| 	mutex_lock(&efx->mac_lock);
 | |
| 	net_dev->mtu = new_mtu;
 | |
| 	efx->type->reconfigure_mac(efx);
 | |
| 	mutex_unlock(&efx->mac_lock);
 | |
| 
 | |
| 	efx_start_all(efx);
 | |
| 	netif_device_attach(efx->net_dev);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int efx_set_mac_address(struct net_device *net_dev, void *data)
 | |
| {
 | |
| 	struct efx_nic *efx = netdev_priv(net_dev);
 | |
| 	struct sockaddr *addr = data;
 | |
| 	u8 *new_addr = addr->sa_data;
 | |
| 
 | |
| 	if (!is_valid_ether_addr(new_addr)) {
 | |
| 		netif_err(efx, drv, efx->net_dev,
 | |
| 			  "invalid ethernet MAC address requested: %pM\n",
 | |
| 			  new_addr);
 | |
| 		return -EADDRNOTAVAIL;
 | |
| 	}
 | |
| 
 | |
| 	ether_addr_copy(net_dev->dev_addr, new_addr);
 | |
| 	efx->type->sriov_mac_address_changed(efx);
 | |
| 
 | |
| 	/* Reconfigure the MAC */
 | |
| 	mutex_lock(&efx->mac_lock);
 | |
| 	efx->type->reconfigure_mac(efx);
 | |
| 	mutex_unlock(&efx->mac_lock);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /* Context: netif_addr_lock held, BHs disabled. */
 | |
| static void efx_set_rx_mode(struct net_device *net_dev)
 | |
| {
 | |
| 	struct efx_nic *efx = netdev_priv(net_dev);
 | |
| 
 | |
| 	if (efx->port_enabled)
 | |
| 		queue_work(efx->workqueue, &efx->mac_work);
 | |
| 	/* Otherwise efx_start_port() will do this */
 | |
| }
 | |
| 
 | |
| static int efx_set_features(struct net_device *net_dev, netdev_features_t data)
 | |
| {
 | |
| 	struct efx_nic *efx = netdev_priv(net_dev);
 | |
| 
 | |
| 	/* If disabling RX n-tuple filtering, clear existing filters */
 | |
| 	if (net_dev->features & ~data & NETIF_F_NTUPLE)
 | |
| 		return efx->type->filter_clear_rx(efx, EFX_FILTER_PRI_MANUAL);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static const struct net_device_ops efx_farch_netdev_ops = {
 | |
| 	.ndo_open		= efx_net_open,
 | |
| 	.ndo_stop		= efx_net_stop,
 | |
| 	.ndo_get_stats64	= efx_net_stats,
 | |
| 	.ndo_tx_timeout		= efx_watchdog,
 | |
| 	.ndo_start_xmit		= efx_hard_start_xmit,
 | |
| 	.ndo_validate_addr	= eth_validate_addr,
 | |
| 	.ndo_do_ioctl		= efx_ioctl,
 | |
| 	.ndo_change_mtu		= efx_change_mtu,
 | |
| 	.ndo_set_mac_address	= efx_set_mac_address,
 | |
| 	.ndo_set_rx_mode	= efx_set_rx_mode,
 | |
| 	.ndo_set_features	= efx_set_features,
 | |
| #ifdef CONFIG_SFC_SRIOV
 | |
| 	.ndo_set_vf_mac		= efx_siena_sriov_set_vf_mac,
 | |
| 	.ndo_set_vf_vlan	= efx_siena_sriov_set_vf_vlan,
 | |
| 	.ndo_set_vf_spoofchk	= efx_siena_sriov_set_vf_spoofchk,
 | |
| 	.ndo_get_vf_config	= efx_siena_sriov_get_vf_config,
 | |
| #endif
 | |
| #ifdef CONFIG_NET_POLL_CONTROLLER
 | |
| 	.ndo_poll_controller = efx_netpoll,
 | |
| #endif
 | |
| 	.ndo_setup_tc		= efx_setup_tc,
 | |
| #ifdef CONFIG_NET_RX_BUSY_POLL
 | |
| 	.ndo_busy_poll		= efx_busy_poll,
 | |
| #endif
 | |
| #ifdef CONFIG_RFS_ACCEL
 | |
| 	.ndo_rx_flow_steer	= efx_filter_rfs,
 | |
| #endif
 | |
| };
 | |
| 
 | |
| static const struct net_device_ops efx_ef10_netdev_ops = {
 | |
| 	.ndo_open		= efx_net_open,
 | |
| 	.ndo_stop		= efx_net_stop,
 | |
| 	.ndo_get_stats64	= efx_net_stats,
 | |
| 	.ndo_tx_timeout		= efx_watchdog,
 | |
| 	.ndo_start_xmit		= efx_hard_start_xmit,
 | |
| 	.ndo_validate_addr	= eth_validate_addr,
 | |
| 	.ndo_do_ioctl		= efx_ioctl,
 | |
| 	.ndo_change_mtu		= efx_change_mtu,
 | |
| 	.ndo_set_mac_address	= efx_set_mac_address,
 | |
| 	.ndo_set_rx_mode	= efx_set_rx_mode,
 | |
| 	.ndo_set_features	= efx_set_features,
 | |
| #ifdef CONFIG_NET_POLL_CONTROLLER
 | |
| 	.ndo_poll_controller	= efx_netpoll,
 | |
| #endif
 | |
| #ifdef CONFIG_NET_RX_BUSY_POLL
 | |
| 	.ndo_busy_poll		= efx_busy_poll,
 | |
| #endif
 | |
| #ifdef CONFIG_RFS_ACCEL
 | |
| 	.ndo_rx_flow_steer	= efx_filter_rfs,
 | |
| #endif
 | |
| };
 | |
| 
 | |
| static void efx_update_name(struct efx_nic *efx)
 | |
| {
 | |
| 	strcpy(efx->name, efx->net_dev->name);
 | |
| 	efx_mtd_rename(efx);
 | |
| 	efx_set_channel_names(efx);
 | |
| }
 | |
| 
 | |
| static int efx_netdev_event(struct notifier_block *this,
 | |
| 			    unsigned long event, void *ptr)
 | |
| {
 | |
| 	struct net_device *net_dev = netdev_notifier_info_to_dev(ptr);
 | |
| 
 | |
| 	if ((net_dev->netdev_ops == &efx_farch_netdev_ops ||
 | |
| 	     net_dev->netdev_ops == &efx_ef10_netdev_ops) &&
 | |
| 	    event == NETDEV_CHANGENAME)
 | |
| 		efx_update_name(netdev_priv(net_dev));
 | |
| 
 | |
| 	return NOTIFY_DONE;
 | |
| }
 | |
| 
 | |
| static struct notifier_block efx_netdev_notifier = {
 | |
| 	.notifier_call = efx_netdev_event,
 | |
| };
 | |
| 
 | |
| static ssize_t
 | |
| show_phy_type(struct device *dev, struct device_attribute *attr, char *buf)
 | |
| {
 | |
| 	struct efx_nic *efx = pci_get_drvdata(to_pci_dev(dev));
 | |
| 	return sprintf(buf, "%d\n", efx->phy_type);
 | |
| }
 | |
| static DEVICE_ATTR(phy_type, 0444, show_phy_type, NULL);
 | |
| 
 | |
| static int efx_register_netdev(struct efx_nic *efx)
 | |
| {
 | |
| 	struct net_device *net_dev = efx->net_dev;
 | |
| 	struct efx_channel *channel;
 | |
| 	int rc;
 | |
| 
 | |
| 	net_dev->watchdog_timeo = 5 * HZ;
 | |
| 	net_dev->irq = efx->pci_dev->irq;
 | |
| 	if (efx_nic_rev(efx) >= EFX_REV_HUNT_A0) {
 | |
| 		net_dev->netdev_ops = &efx_ef10_netdev_ops;
 | |
| 		net_dev->priv_flags |= IFF_UNICAST_FLT;
 | |
| 	} else {
 | |
| 		net_dev->netdev_ops = &efx_farch_netdev_ops;
 | |
| 	}
 | |
| 	net_dev->ethtool_ops = &efx_ethtool_ops;
 | |
| 	net_dev->gso_max_segs = EFX_TSO_MAX_SEGS;
 | |
| 
 | |
| 	rtnl_lock();
 | |
| 
 | |
| 	/* Enable resets to be scheduled and check whether any were
 | |
| 	 * already requested.  If so, the NIC is probably hosed so we
 | |
| 	 * abort.
 | |
| 	 */
 | |
| 	efx->state = STATE_READY;
 | |
| 	smp_mb(); /* ensure we change state before checking reset_pending */
 | |
| 	if (efx->reset_pending) {
 | |
| 		netif_err(efx, probe, efx->net_dev,
 | |
| 			  "aborting probe due to scheduled reset\n");
 | |
| 		rc = -EIO;
 | |
| 		goto fail_locked;
 | |
| 	}
 | |
| 
 | |
| 	rc = dev_alloc_name(net_dev, net_dev->name);
 | |
| 	if (rc < 0)
 | |
| 		goto fail_locked;
 | |
| 	efx_update_name(efx);
 | |
| 
 | |
| 	/* Always start with carrier off; PHY events will detect the link */
 | |
| 	netif_carrier_off(net_dev);
 | |
| 
 | |
| 	rc = register_netdevice(net_dev);
 | |
| 	if (rc)
 | |
| 		goto fail_locked;
 | |
| 
 | |
| 	efx_for_each_channel(channel, efx) {
 | |
| 		struct efx_tx_queue *tx_queue;
 | |
| 		efx_for_each_channel_tx_queue(tx_queue, channel)
 | |
| 			efx_init_tx_queue_core_txq(tx_queue);
 | |
| 	}
 | |
| 
 | |
| 	efx_associate(efx);
 | |
| 
 | |
| 	rtnl_unlock();
 | |
| 
 | |
| 	rc = device_create_file(&efx->pci_dev->dev, &dev_attr_phy_type);
 | |
| 	if (rc) {
 | |
| 		netif_err(efx, drv, efx->net_dev,
 | |
| 			  "failed to init net dev attributes\n");
 | |
| 		goto fail_registered;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| fail_registered:
 | |
| 	rtnl_lock();
 | |
| 	efx_dissociate(efx);
 | |
| 	unregister_netdevice(net_dev);
 | |
| fail_locked:
 | |
| 	efx->state = STATE_UNINIT;
 | |
| 	rtnl_unlock();
 | |
| 	netif_err(efx, drv, efx->net_dev, "could not register net dev\n");
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| static void efx_unregister_netdev(struct efx_nic *efx)
 | |
| {
 | |
| 	if (!efx->net_dev)
 | |
| 		return;
 | |
| 
 | |
| 	BUG_ON(netdev_priv(efx->net_dev) != efx);
 | |
| 
 | |
| 	strlcpy(efx->name, pci_name(efx->pci_dev), sizeof(efx->name));
 | |
| 	device_remove_file(&efx->pci_dev->dev, &dev_attr_phy_type);
 | |
| 
 | |
| 	rtnl_lock();
 | |
| 	unregister_netdevice(efx->net_dev);
 | |
| 	efx->state = STATE_UNINIT;
 | |
| 	rtnl_unlock();
 | |
| }
 | |
| 
 | |
| /**************************************************************************
 | |
|  *
 | |
|  * Device reset and suspend
 | |
|  *
 | |
|  **************************************************************************/
 | |
| 
 | |
| /* Tears down the entire software state and most of the hardware state
 | |
|  * before reset.  */
 | |
| void efx_reset_down(struct efx_nic *efx, enum reset_type method)
 | |
| {
 | |
| 	EFX_ASSERT_RESET_SERIALISED(efx);
 | |
| 
 | |
| 	if (method == RESET_TYPE_MCDI_TIMEOUT)
 | |
| 		efx->type->prepare_flr(efx);
 | |
| 
 | |
| 	efx_stop_all(efx);
 | |
| 	efx_disable_interrupts(efx);
 | |
| 
 | |
| 	mutex_lock(&efx->mac_lock);
 | |
| 	if (efx->port_initialized && method != RESET_TYPE_INVISIBLE)
 | |
| 		efx->phy_op->fini(efx);
 | |
| 	efx->type->fini(efx);
 | |
| }
 | |
| 
 | |
| /* This function will always ensure that the locks acquired in
 | |
|  * efx_reset_down() are released. A failure return code indicates
 | |
|  * that we were unable to reinitialise the hardware, and the
 | |
|  * driver should be disabled. If ok is false, then the rx and tx
 | |
|  * engines are not restarted, pending a RESET_DISABLE. */
 | |
| int efx_reset_up(struct efx_nic *efx, enum reset_type method, bool ok)
 | |
| {
 | |
| 	int rc;
 | |
| 
 | |
| 	EFX_ASSERT_RESET_SERIALISED(efx);
 | |
| 
 | |
| 	if (method == RESET_TYPE_MCDI_TIMEOUT)
 | |
| 		efx->type->finish_flr(efx);
 | |
| 
 | |
| 	/* Ensure that SRAM is initialised even if we're disabling the device */
 | |
| 	rc = efx->type->init(efx);
 | |
| 	if (rc) {
 | |
| 		netif_err(efx, drv, efx->net_dev, "failed to initialise NIC\n");
 | |
| 		goto fail;
 | |
| 	}
 | |
| 
 | |
| 	if (!ok)
 | |
| 		goto fail;
 | |
| 
 | |
| 	if (efx->port_initialized && method != RESET_TYPE_INVISIBLE) {
 | |
| 		rc = efx->phy_op->init(efx);
 | |
| 		if (rc)
 | |
| 			goto fail;
 | |
| 		if (efx->phy_op->reconfigure(efx))
 | |
| 			netif_err(efx, drv, efx->net_dev,
 | |
| 				  "could not restore PHY settings\n");
 | |
| 	}
 | |
| 
 | |
| 	rc = efx_enable_interrupts(efx);
 | |
| 	if (rc)
 | |
| 		goto fail;
 | |
| 	efx_restore_filters(efx);
 | |
| 	efx->type->sriov_reset(efx);
 | |
| 
 | |
| 	mutex_unlock(&efx->mac_lock);
 | |
| 
 | |
| 	efx_start_all(efx);
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| fail:
 | |
| 	efx->port_initialized = false;
 | |
| 
 | |
| 	mutex_unlock(&efx->mac_lock);
 | |
| 
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| /* Reset the NIC using the specified method.  Note that the reset may
 | |
|  * fail, in which case the card will be left in an unusable state.
 | |
|  *
 | |
|  * Caller must hold the rtnl_lock.
 | |
|  */
 | |
| int efx_reset(struct efx_nic *efx, enum reset_type method)
 | |
| {
 | |
| 	int rc, rc2;
 | |
| 	bool disabled;
 | |
| 
 | |
| 	netif_info(efx, drv, efx->net_dev, "resetting (%s)\n",
 | |
| 		   RESET_TYPE(method));
 | |
| 
 | |
| 	efx_device_detach_sync(efx);
 | |
| 	efx_reset_down(efx, method);
 | |
| 
 | |
| 	rc = efx->type->reset(efx, method);
 | |
| 	if (rc) {
 | |
| 		netif_err(efx, drv, efx->net_dev, "failed to reset hardware\n");
 | |
| 		goto out;
 | |
| 	}
 | |
| 
 | |
| 	/* Clear flags for the scopes we covered.  We assume the NIC and
 | |
| 	 * driver are now quiescent so that there is no race here.
 | |
| 	 */
 | |
| 	if (method < RESET_TYPE_MAX_METHOD)
 | |
| 		efx->reset_pending &= -(1 << (method + 1));
 | |
| 	else /* it doesn't fit into the well-ordered scope hierarchy */
 | |
| 		__clear_bit(method, &efx->reset_pending);
 | |
| 
 | |
| 	/* Reinitialise bus-mastering, which may have been turned off before
 | |
| 	 * the reset was scheduled. This is still appropriate, even in the
 | |
| 	 * RESET_TYPE_DISABLE since this driver generally assumes the hardware
 | |
| 	 * can respond to requests. */
 | |
| 	pci_set_master(efx->pci_dev);
 | |
| 
 | |
| out:
 | |
| 	/* Leave device stopped if necessary */
 | |
| 	disabled = rc ||
 | |
| 		method == RESET_TYPE_DISABLE ||
 | |
| 		method == RESET_TYPE_RECOVER_OR_DISABLE;
 | |
| 	rc2 = efx_reset_up(efx, method, !disabled);
 | |
| 	if (rc2) {
 | |
| 		disabled = true;
 | |
| 		if (!rc)
 | |
| 			rc = rc2;
 | |
| 	}
 | |
| 
 | |
| 	if (disabled) {
 | |
| 		dev_close(efx->net_dev);
 | |
| 		netif_err(efx, drv, efx->net_dev, "has been disabled\n");
 | |
| 		efx->state = STATE_DISABLED;
 | |
| 	} else {
 | |
| 		netif_dbg(efx, drv, efx->net_dev, "reset complete\n");
 | |
| 		netif_device_attach(efx->net_dev);
 | |
| 	}
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| /* Try recovery mechanisms.
 | |
|  * For now only EEH is supported.
 | |
|  * Returns 0 if the recovery mechanisms are unsuccessful.
 | |
|  * Returns a non-zero value otherwise.
 | |
|  */
 | |
| int efx_try_recovery(struct efx_nic *efx)
 | |
| {
 | |
| #ifdef CONFIG_EEH
 | |
| 	/* A PCI error can occur and not be seen by EEH because nothing
 | |
| 	 * happens on the PCI bus. In this case the driver may fail and
 | |
| 	 * schedule a 'recover or reset', leading to this recovery handler.
 | |
| 	 * Manually call the eeh failure check function.
 | |
| 	 */
 | |
| 	struct eeh_dev *eehdev =
 | |
| 		of_node_to_eeh_dev(pci_device_to_OF_node(efx->pci_dev));
 | |
| 
 | |
| 	if (eeh_dev_check_failure(eehdev)) {
 | |
| 		/* The EEH mechanisms will handle the error and reset the
 | |
| 		 * device if necessary.
 | |
| 		 */
 | |
| 		return 1;
 | |
| 	}
 | |
| #endif
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void efx_wait_for_bist_end(struct efx_nic *efx)
 | |
| {
 | |
| 	int i;
 | |
| 
 | |
| 	for (i = 0; i < BIST_WAIT_DELAY_COUNT; ++i) {
 | |
| 		if (efx_mcdi_poll_reboot(efx))
 | |
| 			goto out;
 | |
| 		msleep(BIST_WAIT_DELAY_MS);
 | |
| 	}
 | |
| 
 | |
| 	netif_err(efx, drv, efx->net_dev, "Warning: No MC reboot after BIST mode\n");
 | |
| out:
 | |
| 	/* Either way unset the BIST flag. If we found no reboot we probably
 | |
| 	 * won't recover, but we should try.
 | |
| 	 */
 | |
| 	efx->mc_bist_for_other_fn = false;
 | |
| }
 | |
| 
 | |
| /* The worker thread exists so that code that cannot sleep can
 | |
|  * schedule a reset for later.
 | |
|  */
 | |
| static void efx_reset_work(struct work_struct *data)
 | |
| {
 | |
| 	struct efx_nic *efx = container_of(data, struct efx_nic, reset_work);
 | |
| 	unsigned long pending;
 | |
| 	enum reset_type method;
 | |
| 
 | |
| 	pending = ACCESS_ONCE(efx->reset_pending);
 | |
| 	method = fls(pending) - 1;
 | |
| 
 | |
| 	if (method == RESET_TYPE_MC_BIST)
 | |
| 		efx_wait_for_bist_end(efx);
 | |
| 
 | |
| 	if ((method == RESET_TYPE_RECOVER_OR_DISABLE ||
 | |
| 	     method == RESET_TYPE_RECOVER_OR_ALL) &&
 | |
| 	    efx_try_recovery(efx))
 | |
| 		return;
 | |
| 
 | |
| 	if (!pending)
 | |
| 		return;
 | |
| 
 | |
| 	rtnl_lock();
 | |
| 
 | |
| 	/* We checked the state in efx_schedule_reset() but it may
 | |
| 	 * have changed by now.  Now that we have the RTNL lock,
 | |
| 	 * it cannot change again.
 | |
| 	 */
 | |
| 	if (efx->state == STATE_READY)
 | |
| 		(void)efx_reset(efx, method);
 | |
| 
 | |
| 	rtnl_unlock();
 | |
| }
 | |
| 
 | |
| void efx_schedule_reset(struct efx_nic *efx, enum reset_type type)
 | |
| {
 | |
| 	enum reset_type method;
 | |
| 
 | |
| 	if (efx->state == STATE_RECOVERY) {
 | |
| 		netif_dbg(efx, drv, efx->net_dev,
 | |
| 			  "recovering: skip scheduling %s reset\n",
 | |
| 			  RESET_TYPE(type));
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	switch (type) {
 | |
| 	case RESET_TYPE_INVISIBLE:
 | |
| 	case RESET_TYPE_ALL:
 | |
| 	case RESET_TYPE_RECOVER_OR_ALL:
 | |
| 	case RESET_TYPE_WORLD:
 | |
| 	case RESET_TYPE_DISABLE:
 | |
| 	case RESET_TYPE_RECOVER_OR_DISABLE:
 | |
| 	case RESET_TYPE_MC_BIST:
 | |
| 	case RESET_TYPE_MCDI_TIMEOUT:
 | |
| 		method = type;
 | |
| 		netif_dbg(efx, drv, efx->net_dev, "scheduling %s reset\n",
 | |
| 			  RESET_TYPE(method));
 | |
| 		break;
 | |
| 	default:
 | |
| 		method = efx->type->map_reset_reason(type);
 | |
| 		netif_dbg(efx, drv, efx->net_dev,
 | |
| 			  "scheduling %s reset for %s\n",
 | |
| 			  RESET_TYPE(method), RESET_TYPE(type));
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	set_bit(method, &efx->reset_pending);
 | |
| 	smp_mb(); /* ensure we change reset_pending before checking state */
 | |
| 
 | |
| 	/* If we're not READY then just leave the flags set as the cue
 | |
| 	 * to abort probing or reschedule the reset later.
 | |
| 	 */
 | |
| 	if (ACCESS_ONCE(efx->state) != STATE_READY)
 | |
| 		return;
 | |
| 
 | |
| 	/* efx_process_channel() will no longer read events once a
 | |
| 	 * reset is scheduled. So switch back to poll'd MCDI completions. */
 | |
| 	efx_mcdi_mode_poll(efx);
 | |
| 
 | |
| 	queue_work(reset_workqueue, &efx->reset_work);
 | |
| }
 | |
| 
 | |
| /**************************************************************************
 | |
|  *
 | |
|  * List of NICs we support
 | |
|  *
 | |
|  **************************************************************************/
 | |
| 
 | |
| /* PCI device ID table */
 | |
| static const struct pci_device_id efx_pci_table[] = {
 | |
| 	{PCI_DEVICE(PCI_VENDOR_ID_SOLARFLARE,
 | |
| 		    PCI_DEVICE_ID_SOLARFLARE_SFC4000A_0),
 | |
| 	 .driver_data = (unsigned long) &falcon_a1_nic_type},
 | |
| 	{PCI_DEVICE(PCI_VENDOR_ID_SOLARFLARE,
 | |
| 		    PCI_DEVICE_ID_SOLARFLARE_SFC4000B),
 | |
| 	 .driver_data = (unsigned long) &falcon_b0_nic_type},
 | |
| 	{PCI_DEVICE(PCI_VENDOR_ID_SOLARFLARE, 0x0803),	/* SFC9020 */
 | |
| 	 .driver_data = (unsigned long) &siena_a0_nic_type},
 | |
| 	{PCI_DEVICE(PCI_VENDOR_ID_SOLARFLARE, 0x0813),	/* SFL9021 */
 | |
| 	 .driver_data = (unsigned long) &siena_a0_nic_type},
 | |
| 	{PCI_DEVICE(PCI_VENDOR_ID_SOLARFLARE, 0x0903),  /* SFC9120 PF */
 | |
| 	 .driver_data = (unsigned long) &efx_hunt_a0_nic_type},
 | |
| 	{PCI_DEVICE(PCI_VENDOR_ID_SOLARFLARE, 0x0923),  /* SFC9140 PF */
 | |
| 	 .driver_data = (unsigned long) &efx_hunt_a0_nic_type},
 | |
| 	{0}			/* end of list */
 | |
| };
 | |
| 
 | |
| /**************************************************************************
 | |
|  *
 | |
|  * Dummy PHY/MAC operations
 | |
|  *
 | |
|  * Can be used for some unimplemented operations
 | |
|  * Needed so all function pointers are valid and do not have to be tested
 | |
|  * before use
 | |
|  *
 | |
|  **************************************************************************/
 | |
| int efx_port_dummy_op_int(struct efx_nic *efx)
 | |
| {
 | |
| 	return 0;
 | |
| }
 | |
| void efx_port_dummy_op_void(struct efx_nic *efx) {}
 | |
| 
 | |
| static bool efx_port_dummy_op_poll(struct efx_nic *efx)
 | |
| {
 | |
| 	return false;
 | |
| }
 | |
| 
 | |
| static const struct efx_phy_operations efx_dummy_phy_operations = {
 | |
| 	.init		 = efx_port_dummy_op_int,
 | |
| 	.reconfigure	 = efx_port_dummy_op_int,
 | |
| 	.poll		 = efx_port_dummy_op_poll,
 | |
| 	.fini		 = efx_port_dummy_op_void,
 | |
| };
 | |
| 
 | |
| /**************************************************************************
 | |
|  *
 | |
|  * Data housekeeping
 | |
|  *
 | |
|  **************************************************************************/
 | |
| 
 | |
| /* This zeroes out and then fills in the invariants in a struct
 | |
|  * efx_nic (including all sub-structures).
 | |
|  */
 | |
| static int efx_init_struct(struct efx_nic *efx,
 | |
| 			   struct pci_dev *pci_dev, struct net_device *net_dev)
 | |
| {
 | |
| 	int i;
 | |
| 
 | |
| 	/* Initialise common structures */
 | |
| 	INIT_LIST_HEAD(&efx->node);
 | |
| 	INIT_LIST_HEAD(&efx->secondary_list);
 | |
| 	spin_lock_init(&efx->biu_lock);
 | |
| #ifdef CONFIG_SFC_MTD
 | |
| 	INIT_LIST_HEAD(&efx->mtd_list);
 | |
| #endif
 | |
| 	INIT_WORK(&efx->reset_work, efx_reset_work);
 | |
| 	INIT_DELAYED_WORK(&efx->monitor_work, efx_monitor);
 | |
| 	INIT_DELAYED_WORK(&efx->selftest_work, efx_selftest_async_work);
 | |
| 	efx->pci_dev = pci_dev;
 | |
| 	efx->msg_enable = debug;
 | |
| 	efx->state = STATE_UNINIT;
 | |
| 	strlcpy(efx->name, pci_name(pci_dev), sizeof(efx->name));
 | |
| 
 | |
| 	efx->net_dev = net_dev;
 | |
| 	efx->rx_prefix_size = efx->type->rx_prefix_size;
 | |
| 	efx->rx_ip_align =
 | |
| 		NET_IP_ALIGN ? (efx->rx_prefix_size + NET_IP_ALIGN) % 4 : 0;
 | |
| 	efx->rx_packet_hash_offset =
 | |
| 		efx->type->rx_hash_offset - efx->type->rx_prefix_size;
 | |
| 	efx->rx_packet_ts_offset =
 | |
| 		efx->type->rx_ts_offset - efx->type->rx_prefix_size;
 | |
| 	spin_lock_init(&efx->stats_lock);
 | |
| 	mutex_init(&efx->mac_lock);
 | |
| 	efx->phy_op = &efx_dummy_phy_operations;
 | |
| 	efx->mdio.dev = net_dev;
 | |
| 	INIT_WORK(&efx->mac_work, efx_mac_work);
 | |
| 	init_waitqueue_head(&efx->flush_wq);
 | |
| 
 | |
| 	for (i = 0; i < EFX_MAX_CHANNELS; i++) {
 | |
| 		efx->channel[i] = efx_alloc_channel(efx, i, NULL);
 | |
| 		if (!efx->channel[i])
 | |
| 			goto fail;
 | |
| 		efx->msi_context[i].efx = efx;
 | |
| 		efx->msi_context[i].index = i;
 | |
| 	}
 | |
| 
 | |
| 	/* Higher numbered interrupt modes are less capable! */
 | |
| 	efx->interrupt_mode = max(efx->type->max_interrupt_mode,
 | |
| 				  interrupt_mode);
 | |
| 
 | |
| 	/* Would be good to use the net_dev name, but we're too early */
 | |
| 	snprintf(efx->workqueue_name, sizeof(efx->workqueue_name), "sfc%s",
 | |
| 		 pci_name(pci_dev));
 | |
| 	efx->workqueue = create_singlethread_workqueue(efx->workqueue_name);
 | |
| 	if (!efx->workqueue)
 | |
| 		goto fail;
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| fail:
 | |
| 	efx_fini_struct(efx);
 | |
| 	return -ENOMEM;
 | |
| }
 | |
| 
 | |
| static void efx_fini_struct(struct efx_nic *efx)
 | |
| {
 | |
| 	int i;
 | |
| 
 | |
| 	for (i = 0; i < EFX_MAX_CHANNELS; i++)
 | |
| 		kfree(efx->channel[i]);
 | |
| 
 | |
| 	kfree(efx->vpd_sn);
 | |
| 
 | |
| 	if (efx->workqueue) {
 | |
| 		destroy_workqueue(efx->workqueue);
 | |
| 		efx->workqueue = NULL;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| void efx_update_sw_stats(struct efx_nic *efx, u64 *stats)
 | |
| {
 | |
| 	u64 n_rx_nodesc_trunc = 0;
 | |
| 	struct efx_channel *channel;
 | |
| 
 | |
| 	efx_for_each_channel(channel, efx)
 | |
| 		n_rx_nodesc_trunc += channel->n_rx_nodesc_trunc;
 | |
| 	stats[GENERIC_STAT_rx_nodesc_trunc] = n_rx_nodesc_trunc;
 | |
| 	stats[GENERIC_STAT_rx_noskb_drops] = atomic_read(&efx->n_rx_noskb_drops);
 | |
| }
 | |
| 
 | |
| /**************************************************************************
 | |
|  *
 | |
|  * PCI interface
 | |
|  *
 | |
|  **************************************************************************/
 | |
| 
 | |
| /* Main body of final NIC shutdown code
 | |
|  * This is called only at module unload (or hotplug removal).
 | |
|  */
 | |
| static void efx_pci_remove_main(struct efx_nic *efx)
 | |
| {
 | |
| 	/* Flush reset_work. It can no longer be scheduled since we
 | |
| 	 * are not READY.
 | |
| 	 */
 | |
| 	BUG_ON(efx->state == STATE_READY);
 | |
| 	cancel_work_sync(&efx->reset_work);
 | |
| 
 | |
| 	efx_disable_interrupts(efx);
 | |
| 	efx_nic_fini_interrupt(efx);
 | |
| 	efx_fini_port(efx);
 | |
| 	efx->type->fini(efx);
 | |
| 	efx_fini_napi(efx);
 | |
| 	efx_remove_all(efx);
 | |
| }
 | |
| 
 | |
| /* Final NIC shutdown
 | |
|  * This is called only at module unload (or hotplug removal).
 | |
|  */
 | |
| static void efx_pci_remove(struct pci_dev *pci_dev)
 | |
| {
 | |
| 	struct efx_nic *efx;
 | |
| 
 | |
| 	efx = pci_get_drvdata(pci_dev);
 | |
| 	if (!efx)
 | |
| 		return;
 | |
| 
 | |
| 	/* Mark the NIC as fini, then stop the interface */
 | |
| 	rtnl_lock();
 | |
| 	efx_dissociate(efx);
 | |
| 	dev_close(efx->net_dev);
 | |
| 	efx_disable_interrupts(efx);
 | |
| 	rtnl_unlock();
 | |
| 
 | |
| 	efx->type->sriov_fini(efx);
 | |
| 	efx_unregister_netdev(efx);
 | |
| 
 | |
| 	efx_mtd_remove(efx);
 | |
| 
 | |
| 	efx_pci_remove_main(efx);
 | |
| 
 | |
| 	efx_fini_io(efx);
 | |
| 	netif_dbg(efx, drv, efx->net_dev, "shutdown successful\n");
 | |
| 
 | |
| 	efx_fini_struct(efx);
 | |
| 	free_netdev(efx->net_dev);
 | |
| 
 | |
| 	pci_disable_pcie_error_reporting(pci_dev);
 | |
| };
 | |
| 
 | |
| /* NIC VPD information
 | |
|  * Called during probe to display the part number of the
 | |
|  * installed NIC.  VPD is potentially very large but this should
 | |
|  * always appear within the first 512 bytes.
 | |
|  */
 | |
| #define SFC_VPD_LEN 512
 | |
| static void efx_probe_vpd_strings(struct efx_nic *efx)
 | |
| {
 | |
| 	struct pci_dev *dev = efx->pci_dev;
 | |
| 	char vpd_data[SFC_VPD_LEN];
 | |
| 	ssize_t vpd_size;
 | |
| 	int ro_start, ro_size, i, j;
 | |
| 
 | |
| 	/* Get the vpd data from the device */
 | |
| 	vpd_size = pci_read_vpd(dev, 0, sizeof(vpd_data), vpd_data);
 | |
| 	if (vpd_size <= 0) {
 | |
| 		netif_err(efx, drv, efx->net_dev, "Unable to read VPD\n");
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	/* Get the Read only section */
 | |
| 	ro_start = pci_vpd_find_tag(vpd_data, 0, vpd_size, PCI_VPD_LRDT_RO_DATA);
 | |
| 	if (ro_start < 0) {
 | |
| 		netif_err(efx, drv, efx->net_dev, "VPD Read-only not found\n");
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	ro_size = pci_vpd_lrdt_size(&vpd_data[ro_start]);
 | |
| 	j = ro_size;
 | |
| 	i = ro_start + PCI_VPD_LRDT_TAG_SIZE;
 | |
| 	if (i + j > vpd_size)
 | |
| 		j = vpd_size - i;
 | |
| 
 | |
| 	/* Get the Part number */
 | |
| 	i = pci_vpd_find_info_keyword(vpd_data, i, j, "PN");
 | |
| 	if (i < 0) {
 | |
| 		netif_err(efx, drv, efx->net_dev, "Part number not found\n");
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	j = pci_vpd_info_field_size(&vpd_data[i]);
 | |
| 	i += PCI_VPD_INFO_FLD_HDR_SIZE;
 | |
| 	if (i + j > vpd_size) {
 | |
| 		netif_err(efx, drv, efx->net_dev, "Incomplete part number\n");
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	netif_info(efx, drv, efx->net_dev,
 | |
| 		   "Part Number : %.*s\n", j, &vpd_data[i]);
 | |
| 
 | |
| 	i = ro_start + PCI_VPD_LRDT_TAG_SIZE;
 | |
| 	j = ro_size;
 | |
| 	i = pci_vpd_find_info_keyword(vpd_data, i, j, "SN");
 | |
| 	if (i < 0) {
 | |
| 		netif_err(efx, drv, efx->net_dev, "Serial number not found\n");
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	j = pci_vpd_info_field_size(&vpd_data[i]);
 | |
| 	i += PCI_VPD_INFO_FLD_HDR_SIZE;
 | |
| 	if (i + j > vpd_size) {
 | |
| 		netif_err(efx, drv, efx->net_dev, "Incomplete serial number\n");
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	efx->vpd_sn = kmalloc(j + 1, GFP_KERNEL);
 | |
| 	if (!efx->vpd_sn)
 | |
| 		return;
 | |
| 
 | |
| 	snprintf(efx->vpd_sn, j + 1, "%s", &vpd_data[i]);
 | |
| }
 | |
| 
 | |
| 
 | |
| /* Main body of NIC initialisation
 | |
|  * This is called at module load (or hotplug insertion, theoretically).
 | |
|  */
 | |
| static int efx_pci_probe_main(struct efx_nic *efx)
 | |
| {
 | |
| 	int rc;
 | |
| 
 | |
| 	/* Do start-of-day initialisation */
 | |
| 	rc = efx_probe_all(efx);
 | |
| 	if (rc)
 | |
| 		goto fail1;
 | |
| 
 | |
| 	efx_init_napi(efx);
 | |
| 
 | |
| 	rc = efx->type->init(efx);
 | |
| 	if (rc) {
 | |
| 		netif_err(efx, probe, efx->net_dev,
 | |
| 			  "failed to initialise NIC\n");
 | |
| 		goto fail3;
 | |
| 	}
 | |
| 
 | |
| 	rc = efx_init_port(efx);
 | |
| 	if (rc) {
 | |
| 		netif_err(efx, probe, efx->net_dev,
 | |
| 			  "failed to initialise port\n");
 | |
| 		goto fail4;
 | |
| 	}
 | |
| 
 | |
| 	rc = efx_nic_init_interrupt(efx);
 | |
| 	if (rc)
 | |
| 		goto fail5;
 | |
| 	rc = efx_enable_interrupts(efx);
 | |
| 	if (rc)
 | |
| 		goto fail6;
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
|  fail6:
 | |
| 	efx_nic_fini_interrupt(efx);
 | |
|  fail5:
 | |
| 	efx_fini_port(efx);
 | |
|  fail4:
 | |
| 	efx->type->fini(efx);
 | |
|  fail3:
 | |
| 	efx_fini_napi(efx);
 | |
| 	efx_remove_all(efx);
 | |
|  fail1:
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| /* NIC initialisation
 | |
|  *
 | |
|  * This is called at module load (or hotplug insertion,
 | |
|  * theoretically).  It sets up PCI mappings, resets the NIC,
 | |
|  * sets up and registers the network devices with the kernel and hooks
 | |
|  * the interrupt service routine.  It does not prepare the device for
 | |
|  * transmission; this is left to the first time one of the network
 | |
|  * interfaces is brought up (i.e. efx_net_open).
 | |
|  */
 | |
| static int efx_pci_probe(struct pci_dev *pci_dev,
 | |
| 			 const struct pci_device_id *entry)
 | |
| {
 | |
| 	struct net_device *net_dev;
 | |
| 	struct efx_nic *efx;
 | |
| 	int rc;
 | |
| 
 | |
| 	/* Allocate and initialise a struct net_device and struct efx_nic */
 | |
| 	net_dev = alloc_etherdev_mqs(sizeof(*efx), EFX_MAX_CORE_TX_QUEUES,
 | |
| 				     EFX_MAX_RX_QUEUES);
 | |
| 	if (!net_dev)
 | |
| 		return -ENOMEM;
 | |
| 	efx = netdev_priv(net_dev);
 | |
| 	efx->type = (const struct efx_nic_type *) entry->driver_data;
 | |
| 	net_dev->features |= (efx->type->offload_features | NETIF_F_SG |
 | |
| 			      NETIF_F_HIGHDMA | NETIF_F_TSO |
 | |
| 			      NETIF_F_RXCSUM);
 | |
| 	if (efx->type->offload_features & NETIF_F_V6_CSUM)
 | |
| 		net_dev->features |= NETIF_F_TSO6;
 | |
| 	/* Mask for features that also apply to VLAN devices */
 | |
| 	net_dev->vlan_features |= (NETIF_F_ALL_CSUM | NETIF_F_SG |
 | |
| 				   NETIF_F_HIGHDMA | NETIF_F_ALL_TSO |
 | |
| 				   NETIF_F_RXCSUM);
 | |
| 	/* All offloads can be toggled */
 | |
| 	net_dev->hw_features = net_dev->features & ~NETIF_F_HIGHDMA;
 | |
| 	pci_set_drvdata(pci_dev, efx);
 | |
| 	SET_NETDEV_DEV(net_dev, &pci_dev->dev);
 | |
| 	rc = efx_init_struct(efx, pci_dev, net_dev);
 | |
| 	if (rc)
 | |
| 		goto fail1;
 | |
| 
 | |
| 	netif_info(efx, probe, efx->net_dev,
 | |
| 		   "Solarflare NIC detected\n");
 | |
| 
 | |
| 	efx_probe_vpd_strings(efx);
 | |
| 
 | |
| 	/* Set up basic I/O (BAR mappings etc) */
 | |
| 	rc = efx_init_io(efx);
 | |
| 	if (rc)
 | |
| 		goto fail2;
 | |
| 
 | |
| 	rc = efx_pci_probe_main(efx);
 | |
| 	if (rc)
 | |
| 		goto fail3;
 | |
| 
 | |
| 	rc = efx_register_netdev(efx);
 | |
| 	if (rc)
 | |
| 		goto fail4;
 | |
| 
 | |
| 	rc = efx->type->sriov_init(efx);
 | |
| 	if (rc)
 | |
| 		netif_err(efx, probe, efx->net_dev,
 | |
| 			  "SR-IOV can't be enabled rc %d\n", rc);
 | |
| 
 | |
| 	netif_dbg(efx, probe, efx->net_dev, "initialisation successful\n");
 | |
| 
 | |
| 	/* Try to create MTDs, but allow this to fail */
 | |
| 	rtnl_lock();
 | |
| 	rc = efx_mtd_probe(efx);
 | |
| 	rtnl_unlock();
 | |
| 	if (rc)
 | |
| 		netif_warn(efx, probe, efx->net_dev,
 | |
| 			   "failed to create MTDs (%d)\n", rc);
 | |
| 
 | |
| 	rc = pci_enable_pcie_error_reporting(pci_dev);
 | |
| 	if (rc && rc != -EINVAL)
 | |
| 		netif_warn(efx, probe, efx->net_dev,
 | |
| 			   "pci_enable_pcie_error_reporting failed (%d)\n", rc);
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
|  fail4:
 | |
| 	efx_pci_remove_main(efx);
 | |
|  fail3:
 | |
| 	efx_fini_io(efx);
 | |
|  fail2:
 | |
| 	efx_fini_struct(efx);
 | |
|  fail1:
 | |
| 	WARN_ON(rc > 0);
 | |
| 	netif_dbg(efx, drv, efx->net_dev, "initialisation failed. rc=%d\n", rc);
 | |
| 	free_netdev(net_dev);
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| static int efx_pm_freeze(struct device *dev)
 | |
| {
 | |
| 	struct efx_nic *efx = pci_get_drvdata(to_pci_dev(dev));
 | |
| 
 | |
| 	rtnl_lock();
 | |
| 
 | |
| 	if (efx->state != STATE_DISABLED) {
 | |
| 		efx->state = STATE_UNINIT;
 | |
| 
 | |
| 		efx_device_detach_sync(efx);
 | |
| 
 | |
| 		efx_stop_all(efx);
 | |
| 		efx_disable_interrupts(efx);
 | |
| 	}
 | |
| 
 | |
| 	rtnl_unlock();
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int efx_pm_thaw(struct device *dev)
 | |
| {
 | |
| 	int rc;
 | |
| 	struct efx_nic *efx = pci_get_drvdata(to_pci_dev(dev));
 | |
| 
 | |
| 	rtnl_lock();
 | |
| 
 | |
| 	if (efx->state != STATE_DISABLED) {
 | |
| 		rc = efx_enable_interrupts(efx);
 | |
| 		if (rc)
 | |
| 			goto fail;
 | |
| 
 | |
| 		mutex_lock(&efx->mac_lock);
 | |
| 		efx->phy_op->reconfigure(efx);
 | |
| 		mutex_unlock(&efx->mac_lock);
 | |
| 
 | |
| 		efx_start_all(efx);
 | |
| 
 | |
| 		netif_device_attach(efx->net_dev);
 | |
| 
 | |
| 		efx->state = STATE_READY;
 | |
| 
 | |
| 		efx->type->resume_wol(efx);
 | |
| 	}
 | |
| 
 | |
| 	rtnl_unlock();
 | |
| 
 | |
| 	/* Reschedule any quenched resets scheduled during efx_pm_freeze() */
 | |
| 	queue_work(reset_workqueue, &efx->reset_work);
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| fail:
 | |
| 	rtnl_unlock();
 | |
| 
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| static int efx_pm_poweroff(struct device *dev)
 | |
| {
 | |
| 	struct pci_dev *pci_dev = to_pci_dev(dev);
 | |
| 	struct efx_nic *efx = pci_get_drvdata(pci_dev);
 | |
| 
 | |
| 	efx->type->fini(efx);
 | |
| 
 | |
| 	efx->reset_pending = 0;
 | |
| 
 | |
| 	pci_save_state(pci_dev);
 | |
| 	return pci_set_power_state(pci_dev, PCI_D3hot);
 | |
| }
 | |
| 
 | |
| /* Used for both resume and restore */
 | |
| static int efx_pm_resume(struct device *dev)
 | |
| {
 | |
| 	struct pci_dev *pci_dev = to_pci_dev(dev);
 | |
| 	struct efx_nic *efx = pci_get_drvdata(pci_dev);
 | |
| 	int rc;
 | |
| 
 | |
| 	rc = pci_set_power_state(pci_dev, PCI_D0);
 | |
| 	if (rc)
 | |
| 		return rc;
 | |
| 	pci_restore_state(pci_dev);
 | |
| 	rc = pci_enable_device(pci_dev);
 | |
| 	if (rc)
 | |
| 		return rc;
 | |
| 	pci_set_master(efx->pci_dev);
 | |
| 	rc = efx->type->reset(efx, RESET_TYPE_ALL);
 | |
| 	if (rc)
 | |
| 		return rc;
 | |
| 	rc = efx->type->init(efx);
 | |
| 	if (rc)
 | |
| 		return rc;
 | |
| 	rc = efx_pm_thaw(dev);
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| static int efx_pm_suspend(struct device *dev)
 | |
| {
 | |
| 	int rc;
 | |
| 
 | |
| 	efx_pm_freeze(dev);
 | |
| 	rc = efx_pm_poweroff(dev);
 | |
| 	if (rc)
 | |
| 		efx_pm_resume(dev);
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| static const struct dev_pm_ops efx_pm_ops = {
 | |
| 	.suspend	= efx_pm_suspend,
 | |
| 	.resume		= efx_pm_resume,
 | |
| 	.freeze		= efx_pm_freeze,
 | |
| 	.thaw		= efx_pm_thaw,
 | |
| 	.poweroff	= efx_pm_poweroff,
 | |
| 	.restore	= efx_pm_resume,
 | |
| };
 | |
| 
 | |
| /* A PCI error affecting this device was detected.
 | |
|  * At this point MMIO and DMA may be disabled.
 | |
|  * Stop the software path and request a slot reset.
 | |
|  */
 | |
| static pci_ers_result_t efx_io_error_detected(struct pci_dev *pdev,
 | |
| 					      enum pci_channel_state state)
 | |
| {
 | |
| 	pci_ers_result_t status = PCI_ERS_RESULT_RECOVERED;
 | |
| 	struct efx_nic *efx = pci_get_drvdata(pdev);
 | |
| 
 | |
| 	if (state == pci_channel_io_perm_failure)
 | |
| 		return PCI_ERS_RESULT_DISCONNECT;
 | |
| 
 | |
| 	rtnl_lock();
 | |
| 
 | |
| 	if (efx->state != STATE_DISABLED) {
 | |
| 		efx->state = STATE_RECOVERY;
 | |
| 		efx->reset_pending = 0;
 | |
| 
 | |
| 		efx_device_detach_sync(efx);
 | |
| 
 | |
| 		efx_stop_all(efx);
 | |
| 		efx_disable_interrupts(efx);
 | |
| 
 | |
| 		status = PCI_ERS_RESULT_NEED_RESET;
 | |
| 	} else {
 | |
| 		/* If the interface is disabled we don't want to do anything
 | |
| 		 * with it.
 | |
| 		 */
 | |
| 		status = PCI_ERS_RESULT_RECOVERED;
 | |
| 	}
 | |
| 
 | |
| 	rtnl_unlock();
 | |
| 
 | |
| 	pci_disable_device(pdev);
 | |
| 
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| /* Fake a successfull reset, which will be performed later in efx_io_resume. */
 | |
| static pci_ers_result_t efx_io_slot_reset(struct pci_dev *pdev)
 | |
| {
 | |
| 	struct efx_nic *efx = pci_get_drvdata(pdev);
 | |
| 	pci_ers_result_t status = PCI_ERS_RESULT_RECOVERED;
 | |
| 	int rc;
 | |
| 
 | |
| 	if (pci_enable_device(pdev)) {
 | |
| 		netif_err(efx, hw, efx->net_dev,
 | |
| 			  "Cannot re-enable PCI device after reset.\n");
 | |
| 		status =  PCI_ERS_RESULT_DISCONNECT;
 | |
| 	}
 | |
| 
 | |
| 	rc = pci_cleanup_aer_uncorrect_error_status(pdev);
 | |
| 	if (rc) {
 | |
| 		netif_err(efx, hw, efx->net_dev,
 | |
| 		"pci_cleanup_aer_uncorrect_error_status failed (%d)\n", rc);
 | |
| 		/* Non-fatal error. Continue. */
 | |
| 	}
 | |
| 
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| /* Perform the actual reset and resume I/O operations. */
 | |
| static void efx_io_resume(struct pci_dev *pdev)
 | |
| {
 | |
| 	struct efx_nic *efx = pci_get_drvdata(pdev);
 | |
| 	int rc;
 | |
| 
 | |
| 	rtnl_lock();
 | |
| 
 | |
| 	if (efx->state == STATE_DISABLED)
 | |
| 		goto out;
 | |
| 
 | |
| 	rc = efx_reset(efx, RESET_TYPE_ALL);
 | |
| 	if (rc) {
 | |
| 		netif_err(efx, hw, efx->net_dev,
 | |
| 			  "efx_reset failed after PCI error (%d)\n", rc);
 | |
| 	} else {
 | |
| 		efx->state = STATE_READY;
 | |
| 		netif_dbg(efx, hw, efx->net_dev,
 | |
| 			  "Done resetting and resuming IO after PCI error.\n");
 | |
| 	}
 | |
| 
 | |
| out:
 | |
| 	rtnl_unlock();
 | |
| }
 | |
| 
 | |
| /* For simplicity and reliability, we always require a slot reset and try to
 | |
|  * reset the hardware when a pci error affecting the device is detected.
 | |
|  * We leave both the link_reset and mmio_enabled callback unimplemented:
 | |
|  * with our request for slot reset the mmio_enabled callback will never be
 | |
|  * called, and the link_reset callback is not used by AER or EEH mechanisms.
 | |
|  */
 | |
| static struct pci_error_handlers efx_err_handlers = {
 | |
| 	.error_detected = efx_io_error_detected,
 | |
| 	.slot_reset	= efx_io_slot_reset,
 | |
| 	.resume		= efx_io_resume,
 | |
| };
 | |
| 
 | |
| static struct pci_driver efx_pci_driver = {
 | |
| 	.name		= KBUILD_MODNAME,
 | |
| 	.id_table	= efx_pci_table,
 | |
| 	.probe		= efx_pci_probe,
 | |
| 	.remove		= efx_pci_remove,
 | |
| 	.driver.pm	= &efx_pm_ops,
 | |
| 	.err_handler	= &efx_err_handlers,
 | |
| };
 | |
| 
 | |
| /**************************************************************************
 | |
|  *
 | |
|  * Kernel module interface
 | |
|  *
 | |
|  *************************************************************************/
 | |
| 
 | |
| module_param(interrupt_mode, uint, 0444);
 | |
| MODULE_PARM_DESC(interrupt_mode,
 | |
| 		 "Interrupt mode (0=>MSIX 1=>MSI 2=>legacy)");
 | |
| 
 | |
| static int __init efx_init_module(void)
 | |
| {
 | |
| 	int rc;
 | |
| 
 | |
| 	printk(KERN_INFO "Solarflare NET driver v" EFX_DRIVER_VERSION "\n");
 | |
| 
 | |
| 	rc = register_netdevice_notifier(&efx_netdev_notifier);
 | |
| 	if (rc)
 | |
| 		goto err_notifier;
 | |
| 
 | |
| 	rc = efx_init_sriov();
 | |
| 	if (rc)
 | |
| 		goto err_sriov;
 | |
| 
 | |
| 	reset_workqueue = create_singlethread_workqueue("sfc_reset");
 | |
| 	if (!reset_workqueue) {
 | |
| 		rc = -ENOMEM;
 | |
| 		goto err_reset;
 | |
| 	}
 | |
| 
 | |
| 	rc = pci_register_driver(&efx_pci_driver);
 | |
| 	if (rc < 0)
 | |
| 		goto err_pci;
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
|  err_pci:
 | |
| 	destroy_workqueue(reset_workqueue);
 | |
|  err_reset:
 | |
| 	efx_fini_sriov();
 | |
|  err_sriov:
 | |
| 	unregister_netdevice_notifier(&efx_netdev_notifier);
 | |
|  err_notifier:
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| static void __exit efx_exit_module(void)
 | |
| {
 | |
| 	printk(KERN_INFO "Solarflare NET driver unloading\n");
 | |
| 
 | |
| 	pci_unregister_driver(&efx_pci_driver);
 | |
| 	destroy_workqueue(reset_workqueue);
 | |
| 	efx_fini_sriov();
 | |
| 	unregister_netdevice_notifier(&efx_netdev_notifier);
 | |
| 
 | |
| }
 | |
| 
 | |
| module_init(efx_init_module);
 | |
| module_exit(efx_exit_module);
 | |
| 
 | |
| MODULE_AUTHOR("Solarflare Communications and "
 | |
| 	      "Michael Brown <mbrown@fensystems.co.uk>");
 | |
| MODULE_DESCRIPTION("Solarflare network driver");
 | |
| MODULE_LICENSE("GPL");
 | |
| MODULE_DEVICE_TABLE(pci, efx_pci_table);
 |