04dd366195
Fetch FW status registers, as they are important in in understanding of FW reset reasons Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
294 lines
11 KiB
C
294 lines
11 KiB
C
/******************************************************************************
|
|
* Intel Management Engine Interface (Intel MEI) Linux driver
|
|
* Intel MEI Interface Header
|
|
*
|
|
* This file is provided under a dual BSD/GPLv2 license. When using or
|
|
* redistributing this file, you may do so under either license.
|
|
*
|
|
* GPL LICENSE SUMMARY
|
|
*
|
|
* Copyright(c) 2013 - 2014 Intel Corporation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of version 2 of the GNU General Public License as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* The full GNU General Public License is included in this distribution
|
|
* in the file called COPYING
|
|
*
|
|
* Contact Information:
|
|
* Intel Corporation.
|
|
* linux-mei@linux.intel.com
|
|
* http://www.intel.com
|
|
*
|
|
* BSD LICENSE
|
|
*
|
|
* Copyright(c) 2013 - 2014 Intel Corporation. All rights reserved.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* * Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* * Neither the name Intel Corporation nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
*****************************************************************************/
|
|
#ifndef _MEI_HW_TXE_REGS_H_
|
|
#define _MEI_HW_TXE_REGS_H_
|
|
|
|
#include "hw.h"
|
|
|
|
#define SEC_ALIVENESS_TIMER_TIMEOUT (5 * MSEC_PER_SEC)
|
|
#define SEC_ALIVENESS_WAIT_TIMEOUT (1 * MSEC_PER_SEC)
|
|
#define SEC_RESET_WAIT_TIMEOUT (1 * MSEC_PER_SEC)
|
|
#define SEC_READY_WAIT_TIMEOUT (5 * MSEC_PER_SEC)
|
|
#define START_MESSAGE_RESPONSE_WAIT_TIMEOUT (5 * MSEC_PER_SEC)
|
|
#define RESET_CANCEL_WAIT_TIMEOUT (1 * MSEC_PER_SEC)
|
|
|
|
enum {
|
|
SEC_BAR,
|
|
BRIDGE_BAR,
|
|
|
|
NUM_OF_MEM_BARS
|
|
};
|
|
|
|
/* SeC FW Status Register
|
|
*
|
|
* FW uses this register in order to report its status to host.
|
|
* This register resides in PCI-E config space.
|
|
*/
|
|
#define PCI_CFG_TXE_FW_STS0 0x40
|
|
# define PCI_CFG_TXE_FW_STS0_WRK_ST_MSK 0x0000000F
|
|
# define PCI_CFG_TXE_FW_STS0_OP_ST_MSK 0x000001C0
|
|
# define PCI_CFG_TXE_FW_STS0_FW_INIT_CMPLT 0x00000200
|
|
# define PCI_CFG_TXE_FW_STS0_ERR_CODE_MSK 0x0000F000
|
|
# define PCI_CFG_TXE_FW_STS0_OP_MODE_MSK 0x000F0000
|
|
# define PCI_CFG_TXE_FW_STS0_RST_CNT_MSK 0x00F00000
|
|
#define PCI_CFG_TXE_FW_STS1 0x48
|
|
|
|
#define IPC_BASE_ADDR 0x80400 /* SeC IPC Base Address */
|
|
|
|
/* IPC Input Doorbell Register */
|
|
#define SEC_IPC_INPUT_DOORBELL_REG (0x0000 + IPC_BASE_ADDR)
|
|
|
|
/* IPC Input Status Register
|
|
* This register indicates whether or not processing of
|
|
* the most recent command has been completed by the SEC
|
|
* New commands and payloads should not be written by the Host
|
|
* until this indicates that the previous command has been processed.
|
|
*/
|
|
#define SEC_IPC_INPUT_STATUS_REG (0x0008 + IPC_BASE_ADDR)
|
|
# define SEC_IPC_INPUT_STATUS_RDY BIT(0)
|
|
|
|
/* IPC Host Interrupt Status Register */
|
|
#define SEC_IPC_HOST_INT_STATUS_REG (0x0010 + IPC_BASE_ADDR)
|
|
#define SEC_IPC_HOST_INT_STATUS_OUT_DB BIT(0)
|
|
#define SEC_IPC_HOST_INT_STATUS_IN_RDY BIT(1)
|
|
#define SEC_IPC_HOST_INT_STATUS_HDCP_M0_RCVD BIT(5)
|
|
#define SEC_IPC_HOST_INT_STATUS_ILL_MEM_ACCESS BIT(17)
|
|
#define SEC_IPC_HOST_INT_STATUS_AES_HKEY_ERR BIT(18)
|
|
#define SEC_IPC_HOST_INT_STATUS_DES_HKEY_ERR BIT(19)
|
|
#define SEC_IPC_HOST_INT_STATUS_TMRMTB_OVERFLOW BIT(21)
|
|
|
|
/* Convenient mask for pending interrupts */
|
|
#define SEC_IPC_HOST_INT_STATUS_PENDING \
|
|
(SEC_IPC_HOST_INT_STATUS_OUT_DB| \
|
|
SEC_IPC_HOST_INT_STATUS_IN_RDY)
|
|
|
|
/* IPC Host Interrupt Mask Register */
|
|
#define SEC_IPC_HOST_INT_MASK_REG (0x0014 + IPC_BASE_ADDR)
|
|
|
|
# define SEC_IPC_HOST_INT_MASK_OUT_DB BIT(0) /* Output Doorbell Int Mask */
|
|
# define SEC_IPC_HOST_INT_MASK_IN_RDY BIT(1) /* Input Ready Int Mask */
|
|
|
|
/* IPC Input Payload RAM */
|
|
#define SEC_IPC_INPUT_PAYLOAD_REG (0x0100 + IPC_BASE_ADDR)
|
|
/* IPC Shared Payload RAM */
|
|
#define IPC_SHARED_PAYLOAD_REG (0x0200 + IPC_BASE_ADDR)
|
|
|
|
/* SeC Address Translation Table Entry 2 - Ctrl
|
|
*
|
|
* This register resides also in SeC's PCI-E Memory space.
|
|
*/
|
|
#define SATT2_CTRL_REG 0x1040
|
|
# define SATT2_CTRL_VALID_MSK BIT(0)
|
|
# define SATT2_CTRL_BR_BASE_ADDR_REG_SHIFT 8
|
|
# define SATT2_CTRL_BRIDGE_HOST_EN_MSK BIT(12)
|
|
|
|
/* SATT Table Entry 2 SAP Base Address Register */
|
|
#define SATT2_SAP_BA_REG 0x1044
|
|
/* SATT Table Entry 2 SAP Size Register. */
|
|
#define SATT2_SAP_SIZE_REG 0x1048
|
|
/* SATT Table Entry 2 SAP Bridge Address - LSB Register */
|
|
#define SATT2_BRG_BA_LSB_REG 0x104C
|
|
|
|
/* Host High-level Interrupt Status Register */
|
|
#define HHISR_REG 0x2020
|
|
/* Host High-level Interrupt Enable Register
|
|
*
|
|
* Resides in PCI memory space. This is the top hierarchy for
|
|
* interrupts from SeC to host, aggregating both interrupts that
|
|
* arrive through HICR registers as well as interrupts
|
|
* that arrive via IPC.
|
|
*/
|
|
#define HHIER_REG 0x2024
|
|
#define IPC_HHIER_SEC BIT(0)
|
|
#define IPC_HHIER_BRIDGE BIT(1)
|
|
#define IPC_HHIER_MSK (IPC_HHIER_SEC | IPC_HHIER_BRIDGE)
|
|
|
|
/* Host High-level Interrupt Mask Register.
|
|
*
|
|
* Resides in PCI memory space.
|
|
* This is the top hierarchy for masking interrupts from SeC to host.
|
|
*/
|
|
#define HHIMR_REG 0x2028
|
|
#define IPC_HHIMR_SEC BIT(0)
|
|
#define IPC_HHIMR_BRIDGE BIT(1)
|
|
|
|
/* Host High-level IRQ Status Register */
|
|
#define HHIRQSR_REG 0x202C
|
|
|
|
/* Host Interrupt Cause Register 0 - SeC IPC Readiness
|
|
*
|
|
* This register is both an ICR to Host from PCI Memory Space
|
|
* and it is also exposed in the SeC memory space.
|
|
* This register is used by SeC's IPC driver in order
|
|
* to synchronize with host about IPC interface state.
|
|
*/
|
|
#define HICR_SEC_IPC_READINESS_REG 0x2040
|
|
#define HICR_SEC_IPC_READINESS_HOST_RDY BIT(0)
|
|
#define HICR_SEC_IPC_READINESS_SEC_RDY BIT(1)
|
|
#define HICR_SEC_IPC_READINESS_SYS_RDY \
|
|
(HICR_SEC_IPC_READINESS_HOST_RDY | \
|
|
HICR_SEC_IPC_READINESS_SEC_RDY)
|
|
#define HICR_SEC_IPC_READINESS_RDY_CLR BIT(2)
|
|
|
|
/* Host Interrupt Cause Register 1 - Aliveness Response */
|
|
/* This register is both an ICR to Host from PCI Memory Space
|
|
* and it is also exposed in the SeC memory space.
|
|
* The register may be used by SeC to ACK a host request for aliveness.
|
|
*/
|
|
#define HICR_HOST_ALIVENESS_RESP_REG 0x2044
|
|
#define HICR_HOST_ALIVENESS_RESP_ACK BIT(0)
|
|
|
|
/* Host Interrupt Cause Register 2 - SeC IPC Output Doorbell */
|
|
#define HICR_SEC_IPC_OUTPUT_DOORBELL_REG 0x2048
|
|
|
|
/* Host Interrupt Status Register.
|
|
*
|
|
* Resides in PCI memory space.
|
|
* This is the main register involved in generating interrupts
|
|
* from SeC to host via HICRs.
|
|
* The interrupt generation rules are as follows:
|
|
* An interrupt will be generated whenever for any i,
|
|
* there is a transition from a state where at least one of
|
|
* the following conditions did not hold, to a state where
|
|
* ALL the following conditions hold:
|
|
* A) HISR.INT[i]_STS == 1.
|
|
* B) HIER.INT[i]_EN == 1.
|
|
*/
|
|
#define HISR_REG 0x2060
|
|
#define HISR_INT_0_STS BIT(0)
|
|
#define HISR_INT_1_STS BIT(1)
|
|
#define HISR_INT_2_STS BIT(2)
|
|
#define HISR_INT_3_STS BIT(3)
|
|
#define HISR_INT_4_STS BIT(4)
|
|
#define HISR_INT_5_STS BIT(5)
|
|
#define HISR_INT_6_STS BIT(6)
|
|
#define HISR_INT_7_STS BIT(7)
|
|
#define HISR_INT_STS_MSK \
|
|
(HISR_INT_0_STS | HISR_INT_1_STS | HISR_INT_2_STS)
|
|
|
|
/* Host Interrupt Enable Register. Resides in PCI memory space. */
|
|
#define HIER_REG 0x2064
|
|
#define HIER_INT_0_EN BIT(0)
|
|
#define HIER_INT_1_EN BIT(1)
|
|
#define HIER_INT_2_EN BIT(2)
|
|
#define HIER_INT_3_EN BIT(3)
|
|
#define HIER_INT_4_EN BIT(4)
|
|
#define HIER_INT_5_EN BIT(5)
|
|
#define HIER_INT_6_EN BIT(6)
|
|
#define HIER_INT_7_EN BIT(7)
|
|
|
|
#define HIER_INT_EN_MSK \
|
|
(HIER_INT_0_EN | HIER_INT_1_EN | HIER_INT_2_EN)
|
|
|
|
|
|
/* SEC Memory Space IPC output payload.
|
|
*
|
|
* This register is part of the output payload which SEC provides to host.
|
|
*/
|
|
#define BRIDGE_IPC_OUTPUT_PAYLOAD_REG 0x20C0
|
|
|
|
/* SeC Interrupt Cause Register - Host Aliveness Request
|
|
* This register is both an ICR to SeC and it is also exposed
|
|
* in the host-visible PCI memory space.
|
|
* The register is used by host to request SeC aliveness.
|
|
*/
|
|
#define SICR_HOST_ALIVENESS_REQ_REG 0x214C
|
|
#define SICR_HOST_ALIVENESS_REQ_REQUESTED BIT(0)
|
|
|
|
|
|
/* SeC Interrupt Cause Register - Host IPC Readiness
|
|
*
|
|
* This register is both an ICR to SeC and it is also exposed
|
|
* in the host-visible PCI memory space.
|
|
* This register is used by the host's SeC driver uses in order
|
|
* to synchronize with SeC about IPC interface state.
|
|
*/
|
|
#define SICR_HOST_IPC_READINESS_REQ_REG 0x2150
|
|
|
|
|
|
#define SICR_HOST_IPC_READINESS_HOST_RDY BIT(0)
|
|
#define SICR_HOST_IPC_READINESS_SEC_RDY BIT(1)
|
|
#define SICR_HOST_IPC_READINESS_SYS_RDY \
|
|
(SICR_HOST_IPC_READINESS_HOST_RDY | \
|
|
SICR_HOST_IPC_READINESS_SEC_RDY)
|
|
#define SICR_HOST_IPC_READINESS_RDY_CLR BIT(2)
|
|
|
|
/* SeC Interrupt Cause Register - SeC IPC Output Status
|
|
*
|
|
* This register indicates whether or not processing of the most recent
|
|
* command has been completed by the Host.
|
|
* New commands and payloads should not be written by SeC until this
|
|
* register indicates that the previous command has been processed.
|
|
*/
|
|
#define SICR_SEC_IPC_OUTPUT_STATUS_REG 0x2154
|
|
# define SEC_IPC_OUTPUT_STATUS_RDY BIT(0)
|
|
|
|
|
|
|
|
/* MEI IPC Message payload size 64 bytes */
|
|
#define PAYLOAD_SIZE 64
|
|
|
|
/* MAX size for SATT range 32MB */
|
|
#define SATT_RANGE_MAX (32 << 20)
|
|
|
|
|
|
#endif /* _MEI_HW_TXE_REGS_H_ */
|
|
|