CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Peter Korsgaard <peter.korsgaard@barco.com> (for ocores and mux-gpio) Acked-by: Havard Skinnemoen <hskinnemoen@gmail.com> (for i2c-gpio) Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> (for puf3) Acked-by: Barry Song <baohua.song@csr.com> (for sirf) Reviewed-by: Jean Delvare <khali@linux-fr.org> [wsa: Fixed "foo* bar" flaws while we are here] Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
		
			
				
	
	
		
			962 lines
		
	
	
	
		
			25 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			962 lines
		
	
	
	
		
			25 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
/*
 | 
						|
 * Copyright (C) 2011 LAPIS Semiconductor Co., Ltd.
 | 
						|
 *
 | 
						|
 * This program is free software; you can redistribute it and/or modify
 | 
						|
 * it under the terms of the GNU General Public License as published by
 | 
						|
 * the Free Software Foundation; version 2 of the License.
 | 
						|
 *
 | 
						|
 * This program is distributed in the hope that it will be useful,
 | 
						|
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 | 
						|
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 | 
						|
 * GNU General Public License for more details.
 | 
						|
 *
 | 
						|
 * You should have received a copy of the GNU General Public License
 | 
						|
 * along with this program; if not, write to the Free Software
 | 
						|
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
 | 
						|
 */
 | 
						|
 | 
						|
#include <linux/module.h>
 | 
						|
#include <linux/kernel.h>
 | 
						|
#include <linux/delay.h>
 | 
						|
#include <linux/init.h>
 | 
						|
#include <linux/errno.h>
 | 
						|
#include <linux/i2c.h>
 | 
						|
#include <linux/fs.h>
 | 
						|
#include <linux/io.h>
 | 
						|
#include <linux/types.h>
 | 
						|
#include <linux/interrupt.h>
 | 
						|
#include <linux/jiffies.h>
 | 
						|
#include <linux/pci.h>
 | 
						|
#include <linux/mutex.h>
 | 
						|
#include <linux/ktime.h>
 | 
						|
#include <linux/slab.h>
 | 
						|
 | 
						|
#define PCH_EVENT_SET	0	/* I2C Interrupt Event Set Status */
 | 
						|
#define PCH_EVENT_NONE	1	/* I2C Interrupt Event Clear Status */
 | 
						|
#define PCH_MAX_CLK		100000	/* Maximum Clock speed in MHz */
 | 
						|
#define PCH_BUFFER_MODE_ENABLE	0x0002	/* flag for Buffer mode enable */
 | 
						|
#define PCH_EEPROM_SW_RST_MODE_ENABLE	0x0008	/* EEPROM SW RST enable flag */
 | 
						|
 | 
						|
#define PCH_I2CSADR	0x00	/* I2C slave address register */
 | 
						|
#define PCH_I2CCTL	0x04	/* I2C control register */
 | 
						|
#define PCH_I2CSR	0x08	/* I2C status register */
 | 
						|
#define PCH_I2CDR	0x0C	/* I2C data register */
 | 
						|
#define PCH_I2CMON	0x10	/* I2C bus monitor register */
 | 
						|
#define PCH_I2CBC	0x14	/* I2C bus transfer rate setup counter */
 | 
						|
#define PCH_I2CMOD	0x18	/* I2C mode register */
 | 
						|
#define PCH_I2CBUFSLV	0x1C	/* I2C buffer mode slave address register */
 | 
						|
#define PCH_I2CBUFSUB	0x20	/* I2C buffer mode subaddress register */
 | 
						|
#define PCH_I2CBUFFOR	0x24	/* I2C buffer mode format register */
 | 
						|
#define PCH_I2CBUFCTL	0x28	/* I2C buffer mode control register */
 | 
						|
#define PCH_I2CBUFMSK	0x2C	/* I2C buffer mode interrupt mask register */
 | 
						|
#define PCH_I2CBUFSTA	0x30	/* I2C buffer mode status register */
 | 
						|
#define PCH_I2CBUFLEV	0x34	/* I2C buffer mode level register */
 | 
						|
#define PCH_I2CESRFOR	0x38	/* EEPROM software reset mode format register */
 | 
						|
#define PCH_I2CESRCTL	0x3C	/* EEPROM software reset mode ctrl register */
 | 
						|
#define PCH_I2CESRMSK	0x40	/* EEPROM software reset mode */
 | 
						|
#define PCH_I2CESRSTA	0x44	/* EEPROM software reset mode status register */
 | 
						|
#define PCH_I2CTMR	0x48	/* I2C timer register */
 | 
						|
#define PCH_I2CSRST	0xFC	/* I2C reset register */
 | 
						|
#define PCH_I2CNF	0xF8	/* I2C noise filter register */
 | 
						|
 | 
						|
#define BUS_IDLE_TIMEOUT	20
 | 
						|
#define PCH_I2CCTL_I2CMEN	0x0080
 | 
						|
#define TEN_BIT_ADDR_DEFAULT	0xF000
 | 
						|
#define TEN_BIT_ADDR_MASK	0xF0
 | 
						|
#define PCH_START		0x0020
 | 
						|
#define PCH_RESTART		0x0004
 | 
						|
#define PCH_ESR_START		0x0001
 | 
						|
#define PCH_BUFF_START		0x1
 | 
						|
#define PCH_REPSTART		0x0004
 | 
						|
#define PCH_ACK			0x0008
 | 
						|
#define PCH_GETACK		0x0001
 | 
						|
#define CLR_REG			0x0
 | 
						|
#define I2C_RD			0x1
 | 
						|
#define I2CMCF_BIT		0x0080
 | 
						|
#define I2CMIF_BIT		0x0002
 | 
						|
#define I2CMAL_BIT		0x0010
 | 
						|
#define I2CBMFI_BIT		0x0001
 | 
						|
#define I2CBMAL_BIT		0x0002
 | 
						|
#define I2CBMNA_BIT		0x0004
 | 
						|
#define I2CBMTO_BIT		0x0008
 | 
						|
#define I2CBMIS_BIT		0x0010
 | 
						|
#define I2CESRFI_BIT		0X0001
 | 
						|
#define I2CESRTO_BIT		0x0002
 | 
						|
#define I2CESRFIIE_BIT		0x1
 | 
						|
#define I2CESRTOIE_BIT		0x2
 | 
						|
#define I2CBMDZ_BIT		0x0040
 | 
						|
#define I2CBMAG_BIT		0x0020
 | 
						|
#define I2CMBB_BIT		0x0020
 | 
						|
#define BUFFER_MODE_MASK	(I2CBMFI_BIT | I2CBMAL_BIT | I2CBMNA_BIT | \
 | 
						|
				I2CBMTO_BIT | I2CBMIS_BIT)
 | 
						|
#define I2C_ADDR_MSK		0xFF
 | 
						|
#define I2C_MSB_2B_MSK		0x300
 | 
						|
#define FAST_MODE_CLK		400
 | 
						|
#define FAST_MODE_EN		0x0001
 | 
						|
#define SUB_ADDR_LEN_MAX	4
 | 
						|
#define BUF_LEN_MAX		32
 | 
						|
#define PCH_BUFFER_MODE		0x1
 | 
						|
#define EEPROM_SW_RST_MODE	0x0002
 | 
						|
#define NORMAL_INTR_ENBL	0x0300
 | 
						|
#define EEPROM_RST_INTR_ENBL	(I2CESRFIIE_BIT | I2CESRTOIE_BIT)
 | 
						|
#define EEPROM_RST_INTR_DISBL	0x0
 | 
						|
#define BUFFER_MODE_INTR_ENBL	0x001F
 | 
						|
#define BUFFER_MODE_INTR_DISBL	0x0
 | 
						|
#define NORMAL_MODE		0x0
 | 
						|
#define BUFFER_MODE		0x1
 | 
						|
#define EEPROM_SR_MODE		0x2
 | 
						|
#define I2C_TX_MODE		0x0010
 | 
						|
#define PCH_BUF_TX		0xFFF7
 | 
						|
#define PCH_BUF_RD		0x0008
 | 
						|
#define I2C_ERROR_MASK	(I2CESRTO_EVENT | I2CBMIS_EVENT | I2CBMTO_EVENT | \
 | 
						|
			I2CBMNA_EVENT | I2CBMAL_EVENT | I2CMAL_EVENT)
 | 
						|
#define I2CMAL_EVENT		0x0001
 | 
						|
#define I2CMCF_EVENT		0x0002
 | 
						|
#define I2CBMFI_EVENT		0x0004
 | 
						|
#define I2CBMAL_EVENT		0x0008
 | 
						|
#define I2CBMNA_EVENT		0x0010
 | 
						|
#define I2CBMTO_EVENT		0x0020
 | 
						|
#define I2CBMIS_EVENT		0x0040
 | 
						|
#define I2CESRFI_EVENT		0x0080
 | 
						|
#define I2CESRTO_EVENT		0x0100
 | 
						|
#define PCI_DEVICE_ID_PCH_I2C	0x8817
 | 
						|
 | 
						|
#define pch_dbg(adap, fmt, arg...)  \
 | 
						|
	dev_dbg(adap->pch_adapter.dev.parent, "%s :" fmt, __func__, ##arg)
 | 
						|
 | 
						|
#define pch_err(adap, fmt, arg...)  \
 | 
						|
	dev_err(adap->pch_adapter.dev.parent, "%s :" fmt, __func__, ##arg)
 | 
						|
 | 
						|
#define pch_pci_err(pdev, fmt, arg...)  \
 | 
						|
	dev_err(&pdev->dev, "%s :" fmt, __func__, ##arg)
 | 
						|
 | 
						|
#define pch_pci_dbg(pdev, fmt, arg...)  \
 | 
						|
	dev_dbg(&pdev->dev, "%s :" fmt, __func__, ##arg)
 | 
						|
 | 
						|
/*
 | 
						|
Set the number of I2C instance max
 | 
						|
Intel EG20T PCH :		1ch
 | 
						|
LAPIS Semiconductor ML7213 IOH :	2ch
 | 
						|
LAPIS Semiconductor ML7831 IOH :	1ch
 | 
						|
*/
 | 
						|
#define PCH_I2C_MAX_DEV			2
 | 
						|
 | 
						|
/**
 | 
						|
 * struct i2c_algo_pch_data - for I2C driver functionalities
 | 
						|
 * @pch_adapter:		stores the reference to i2c_adapter structure
 | 
						|
 * @p_adapter_info:		stores the reference to adapter_info structure
 | 
						|
 * @pch_base_address:		specifies the remapped base address
 | 
						|
 * @pch_buff_mode_en:		specifies if buffer mode is enabled
 | 
						|
 * @pch_event_flag:		specifies occurrence of interrupt events
 | 
						|
 * @pch_i2c_xfer_in_progress:	specifies whether the transfer is completed
 | 
						|
 */
 | 
						|
struct i2c_algo_pch_data {
 | 
						|
	struct i2c_adapter pch_adapter;
 | 
						|
	struct adapter_info *p_adapter_info;
 | 
						|
	void __iomem *pch_base_address;
 | 
						|
	int pch_buff_mode_en;
 | 
						|
	u32 pch_event_flag;
 | 
						|
	bool pch_i2c_xfer_in_progress;
 | 
						|
};
 | 
						|
 | 
						|
/**
 | 
						|
 * struct adapter_info - This structure holds the adapter information for the
 | 
						|
			 PCH i2c controller
 | 
						|
 * @pch_data:		stores a list of i2c_algo_pch_data
 | 
						|
 * @pch_i2c_suspended:	specifies whether the system is suspended or not
 | 
						|
 *			perhaps with more lines and words.
 | 
						|
 * @ch_num:		specifies the number of i2c instance
 | 
						|
 *
 | 
						|
 * pch_data has as many elements as maximum I2C channels
 | 
						|
 */
 | 
						|
struct adapter_info {
 | 
						|
	struct i2c_algo_pch_data pch_data[PCH_I2C_MAX_DEV];
 | 
						|
	bool pch_i2c_suspended;
 | 
						|
	int ch_num;
 | 
						|
};
 | 
						|
 | 
						|
 | 
						|
static int pch_i2c_speed = 100; /* I2C bus speed in Kbps */
 | 
						|
static int pch_clk = 50000;	/* specifies I2C clock speed in KHz */
 | 
						|
static wait_queue_head_t pch_event;
 | 
						|
static DEFINE_MUTEX(pch_mutex);
 | 
						|
 | 
						|
/* Definition for ML7213 by LAPIS Semiconductor */
 | 
						|
#define PCI_VENDOR_ID_ROHM		0x10DB
 | 
						|
#define PCI_DEVICE_ID_ML7213_I2C	0x802D
 | 
						|
#define PCI_DEVICE_ID_ML7223_I2C	0x8010
 | 
						|
#define PCI_DEVICE_ID_ML7831_I2C	0x8817
 | 
						|
 | 
						|
static DEFINE_PCI_DEVICE_TABLE(pch_pcidev_id) = {
 | 
						|
	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PCH_I2C),   1, },
 | 
						|
	{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_I2C), 2, },
 | 
						|
	{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7223_I2C), 1, },
 | 
						|
	{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7831_I2C), 1, },
 | 
						|
	{0,}
 | 
						|
};
 | 
						|
 | 
						|
static irqreturn_t pch_i2c_handler(int irq, void *pData);
 | 
						|
 | 
						|
static inline void pch_setbit(void __iomem *addr, u32 offset, u32 bitmask)
 | 
						|
{
 | 
						|
	u32 val;
 | 
						|
	val = ioread32(addr + offset);
 | 
						|
	val |= bitmask;
 | 
						|
	iowrite32(val, addr + offset);
 | 
						|
}
 | 
						|
 | 
						|
static inline void pch_clrbit(void __iomem *addr, u32 offset, u32 bitmask)
 | 
						|
{
 | 
						|
	u32 val;
 | 
						|
	val = ioread32(addr + offset);
 | 
						|
	val &= (~bitmask);
 | 
						|
	iowrite32(val, addr + offset);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * pch_i2c_init() - hardware initialization of I2C module
 | 
						|
 * @adap:	Pointer to struct i2c_algo_pch_data.
 | 
						|
 */
 | 
						|
static void pch_i2c_init(struct i2c_algo_pch_data *adap)
 | 
						|
{
 | 
						|
	void __iomem *p = adap->pch_base_address;
 | 
						|
	u32 pch_i2cbc;
 | 
						|
	u32 pch_i2ctmr;
 | 
						|
	u32 reg_value;
 | 
						|
 | 
						|
	/* reset I2C controller */
 | 
						|
	iowrite32(0x01, p + PCH_I2CSRST);
 | 
						|
	msleep(20);
 | 
						|
	iowrite32(0x0, p + PCH_I2CSRST);
 | 
						|
 | 
						|
	/* Initialize I2C registers */
 | 
						|
	iowrite32(0x21, p + PCH_I2CNF);
 | 
						|
 | 
						|
	pch_setbit(adap->pch_base_address, PCH_I2CCTL, PCH_I2CCTL_I2CMEN);
 | 
						|
 | 
						|
	if (pch_i2c_speed != 400)
 | 
						|
		pch_i2c_speed = 100;
 | 
						|
 | 
						|
	reg_value = PCH_I2CCTL_I2CMEN;
 | 
						|
	if (pch_i2c_speed == FAST_MODE_CLK) {
 | 
						|
		reg_value |= FAST_MODE_EN;
 | 
						|
		pch_dbg(adap, "Fast mode enabled\n");
 | 
						|
	}
 | 
						|
 | 
						|
	if (pch_clk > PCH_MAX_CLK)
 | 
						|
		pch_clk = 62500;
 | 
						|
 | 
						|
	pch_i2cbc = (pch_clk + (pch_i2c_speed * 4)) / (pch_i2c_speed * 8);
 | 
						|
	/* Set transfer speed in I2CBC */
 | 
						|
	iowrite32(pch_i2cbc, p + PCH_I2CBC);
 | 
						|
 | 
						|
	pch_i2ctmr = (pch_clk) / 8;
 | 
						|
	iowrite32(pch_i2ctmr, p + PCH_I2CTMR);
 | 
						|
 | 
						|
	reg_value |= NORMAL_INTR_ENBL;	/* Enable interrupts in normal mode */
 | 
						|
	iowrite32(reg_value, p + PCH_I2CCTL);
 | 
						|
 | 
						|
	pch_dbg(adap,
 | 
						|
		"I2CCTL=%x pch_i2cbc=%x pch_i2ctmr=%x Enable interrupts\n",
 | 
						|
		ioread32(p + PCH_I2CCTL), pch_i2cbc, pch_i2ctmr);
 | 
						|
 | 
						|
	init_waitqueue_head(&pch_event);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * pch_i2c_wait_for_bus_idle() - check the status of bus.
 | 
						|
 * @adap:	Pointer to struct i2c_algo_pch_data.
 | 
						|
 * @timeout:	waiting time counter (ms).
 | 
						|
 */
 | 
						|
static s32 pch_i2c_wait_for_bus_idle(struct i2c_algo_pch_data *adap,
 | 
						|
				     s32 timeout)
 | 
						|
{
 | 
						|
	void __iomem *p = adap->pch_base_address;
 | 
						|
	int schedule = 0;
 | 
						|
	unsigned long end = jiffies + msecs_to_jiffies(timeout);
 | 
						|
 | 
						|
	while (ioread32(p + PCH_I2CSR) & I2CMBB_BIT) {
 | 
						|
		if (time_after(jiffies, end)) {
 | 
						|
			pch_dbg(adap, "I2CSR = %x\n", ioread32(p + PCH_I2CSR));
 | 
						|
			pch_err(adap, "%s: Timeout Error.return%d\n",
 | 
						|
					__func__, -ETIME);
 | 
						|
			pch_i2c_init(adap);
 | 
						|
 | 
						|
			return -ETIME;
 | 
						|
		}
 | 
						|
 | 
						|
		if (!schedule)
 | 
						|
			/* Retry after some usecs */
 | 
						|
			udelay(5);
 | 
						|
		else
 | 
						|
			/* Wait a bit more without consuming CPU */
 | 
						|
			usleep_range(20, 1000);
 | 
						|
 | 
						|
		schedule = 1;
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * pch_i2c_start() - Generate I2C start condition in normal mode.
 | 
						|
 * @adap:	Pointer to struct i2c_algo_pch_data.
 | 
						|
 *
 | 
						|
 * Generate I2C start condition in normal mode by setting I2CCTL.I2CMSTA to 1.
 | 
						|
 */
 | 
						|
static void pch_i2c_start(struct i2c_algo_pch_data *adap)
 | 
						|
{
 | 
						|
	void __iomem *p = adap->pch_base_address;
 | 
						|
	pch_dbg(adap, "I2CCTL = %x\n", ioread32(p + PCH_I2CCTL));
 | 
						|
	pch_setbit(adap->pch_base_address, PCH_I2CCTL, PCH_START);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * pch_i2c_getack() - to confirm ACK/NACK
 | 
						|
 * @adap:	Pointer to struct i2c_algo_pch_data.
 | 
						|
 */
 | 
						|
static s32 pch_i2c_getack(struct i2c_algo_pch_data *adap)
 | 
						|
{
 | 
						|
	u32 reg_val;
 | 
						|
	void __iomem *p = adap->pch_base_address;
 | 
						|
	reg_val = ioread32(p + PCH_I2CSR) & PCH_GETACK;
 | 
						|
 | 
						|
	if (reg_val != 0) {
 | 
						|
		pch_err(adap, "return%d\n", -EPROTO);
 | 
						|
		return -EPROTO;
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * pch_i2c_stop() - generate stop condition in normal mode.
 | 
						|
 * @adap:	Pointer to struct i2c_algo_pch_data.
 | 
						|
 */
 | 
						|
static void pch_i2c_stop(struct i2c_algo_pch_data *adap)
 | 
						|
{
 | 
						|
	void __iomem *p = adap->pch_base_address;
 | 
						|
	pch_dbg(adap, "I2CCTL = %x\n", ioread32(p + PCH_I2CCTL));
 | 
						|
	/* clear the start bit */
 | 
						|
	pch_clrbit(adap->pch_base_address, PCH_I2CCTL, PCH_START);
 | 
						|
}
 | 
						|
 | 
						|
static int pch_i2c_wait_for_check_xfer(struct i2c_algo_pch_data *adap)
 | 
						|
{
 | 
						|
	long ret;
 | 
						|
 | 
						|
	ret = wait_event_timeout(pch_event,
 | 
						|
			(adap->pch_event_flag != 0), msecs_to_jiffies(1000));
 | 
						|
	if (!ret) {
 | 
						|
		pch_err(adap, "%s:wait-event timeout\n", __func__);
 | 
						|
		adap->pch_event_flag = 0;
 | 
						|
		pch_i2c_stop(adap);
 | 
						|
		pch_i2c_init(adap);
 | 
						|
		return -ETIMEDOUT;
 | 
						|
	}
 | 
						|
 | 
						|
	if (adap->pch_event_flag & I2C_ERROR_MASK) {
 | 
						|
		pch_err(adap, "Lost Arbitration\n");
 | 
						|
		adap->pch_event_flag = 0;
 | 
						|
		pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMAL_BIT);
 | 
						|
		pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMIF_BIT);
 | 
						|
		pch_i2c_init(adap);
 | 
						|
		return -EAGAIN;
 | 
						|
	}
 | 
						|
 | 
						|
	adap->pch_event_flag = 0;
 | 
						|
 | 
						|
	if (pch_i2c_getack(adap)) {
 | 
						|
		pch_dbg(adap, "Receive NACK for slave address"
 | 
						|
			"setting\n");
 | 
						|
		return -EIO;
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * pch_i2c_repstart() - generate repeated start condition in normal mode
 | 
						|
 * @adap:	Pointer to struct i2c_algo_pch_data.
 | 
						|
 */
 | 
						|
static void pch_i2c_repstart(struct i2c_algo_pch_data *adap)
 | 
						|
{
 | 
						|
	void __iomem *p = adap->pch_base_address;
 | 
						|
	pch_dbg(adap, "I2CCTL = %x\n", ioread32(p + PCH_I2CCTL));
 | 
						|
	pch_setbit(adap->pch_base_address, PCH_I2CCTL, PCH_REPSTART);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * pch_i2c_writebytes() - write data to I2C bus in normal mode
 | 
						|
 * @i2c_adap:	Pointer to the struct i2c_adapter.
 | 
						|
 * @last:	specifies whether last message or not.
 | 
						|
 *		In the case of compound mode it will be 1 for last message,
 | 
						|
 *		otherwise 0.
 | 
						|
 * @first:	specifies whether first message or not.
 | 
						|
 *		1 for first message otherwise 0.
 | 
						|
 */
 | 
						|
static s32 pch_i2c_writebytes(struct i2c_adapter *i2c_adap,
 | 
						|
			      struct i2c_msg *msgs, u32 last, u32 first)
 | 
						|
{
 | 
						|
	struct i2c_algo_pch_data *adap = i2c_adap->algo_data;
 | 
						|
	u8 *buf;
 | 
						|
	u32 length;
 | 
						|
	u32 addr;
 | 
						|
	u32 addr_2_msb;
 | 
						|
	u32 addr_8_lsb;
 | 
						|
	s32 wrcount;
 | 
						|
	s32 rtn;
 | 
						|
	void __iomem *p = adap->pch_base_address;
 | 
						|
 | 
						|
	length = msgs->len;
 | 
						|
	buf = msgs->buf;
 | 
						|
	addr = msgs->addr;
 | 
						|
 | 
						|
	/* enable master tx */
 | 
						|
	pch_setbit(adap->pch_base_address, PCH_I2CCTL, I2C_TX_MODE);
 | 
						|
 | 
						|
	pch_dbg(adap, "I2CCTL = %x msgs->len = %d\n", ioread32(p + PCH_I2CCTL),
 | 
						|
		length);
 | 
						|
 | 
						|
	if (first) {
 | 
						|
		if (pch_i2c_wait_for_bus_idle(adap, BUS_IDLE_TIMEOUT) == -ETIME)
 | 
						|
			return -ETIME;
 | 
						|
	}
 | 
						|
 | 
						|
	if (msgs->flags & I2C_M_TEN) {
 | 
						|
		addr_2_msb = ((addr & I2C_MSB_2B_MSK) >> 7) & 0x06;
 | 
						|
		iowrite32(addr_2_msb | TEN_BIT_ADDR_MASK, p + PCH_I2CDR);
 | 
						|
		if (first)
 | 
						|
			pch_i2c_start(adap);
 | 
						|
 | 
						|
		rtn = pch_i2c_wait_for_check_xfer(adap);
 | 
						|
		if (rtn)
 | 
						|
			return rtn;
 | 
						|
 | 
						|
		addr_8_lsb = (addr & I2C_ADDR_MSK);
 | 
						|
		iowrite32(addr_8_lsb, p + PCH_I2CDR);
 | 
						|
	} else {
 | 
						|
		/* set 7 bit slave address and R/W bit as 0 */
 | 
						|
		iowrite32(addr << 1, p + PCH_I2CDR);
 | 
						|
		if (first)
 | 
						|
			pch_i2c_start(adap);
 | 
						|
	}
 | 
						|
 | 
						|
	rtn = pch_i2c_wait_for_check_xfer(adap);
 | 
						|
	if (rtn)
 | 
						|
		return rtn;
 | 
						|
 | 
						|
	for (wrcount = 0; wrcount < length; ++wrcount) {
 | 
						|
		/* write buffer value to I2C data register */
 | 
						|
		iowrite32(buf[wrcount], p + PCH_I2CDR);
 | 
						|
		pch_dbg(adap, "writing %x to Data register\n", buf[wrcount]);
 | 
						|
 | 
						|
		rtn = pch_i2c_wait_for_check_xfer(adap);
 | 
						|
		if (rtn)
 | 
						|
			return rtn;
 | 
						|
 | 
						|
		pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMCF_BIT);
 | 
						|
		pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMIF_BIT);
 | 
						|
	}
 | 
						|
 | 
						|
	/* check if this is the last message */
 | 
						|
	if (last)
 | 
						|
		pch_i2c_stop(adap);
 | 
						|
	else
 | 
						|
		pch_i2c_repstart(adap);
 | 
						|
 | 
						|
	pch_dbg(adap, "return=%d\n", wrcount);
 | 
						|
 | 
						|
	return wrcount;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * pch_i2c_sendack() - send ACK
 | 
						|
 * @adap:	Pointer to struct i2c_algo_pch_data.
 | 
						|
 */
 | 
						|
static void pch_i2c_sendack(struct i2c_algo_pch_data *adap)
 | 
						|
{
 | 
						|
	void __iomem *p = adap->pch_base_address;
 | 
						|
	pch_dbg(adap, "I2CCTL = %x\n", ioread32(p + PCH_I2CCTL));
 | 
						|
	pch_clrbit(adap->pch_base_address, PCH_I2CCTL, PCH_ACK);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * pch_i2c_sendnack() - send NACK
 | 
						|
 * @adap:	Pointer to struct i2c_algo_pch_data.
 | 
						|
 */
 | 
						|
static void pch_i2c_sendnack(struct i2c_algo_pch_data *adap)
 | 
						|
{
 | 
						|
	void __iomem *p = adap->pch_base_address;
 | 
						|
	pch_dbg(adap, "I2CCTL = %x\n", ioread32(p + PCH_I2CCTL));
 | 
						|
	pch_setbit(adap->pch_base_address, PCH_I2CCTL, PCH_ACK);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * pch_i2c_restart() - Generate I2C restart condition in normal mode.
 | 
						|
 * @adap:	Pointer to struct i2c_algo_pch_data.
 | 
						|
 *
 | 
						|
 * Generate I2C restart condition in normal mode by setting I2CCTL.I2CRSTA.
 | 
						|
 */
 | 
						|
static void pch_i2c_restart(struct i2c_algo_pch_data *adap)
 | 
						|
{
 | 
						|
	void __iomem *p = adap->pch_base_address;
 | 
						|
	pch_dbg(adap, "I2CCTL = %x\n", ioread32(p + PCH_I2CCTL));
 | 
						|
	pch_setbit(adap->pch_base_address, PCH_I2CCTL, PCH_RESTART);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * pch_i2c_readbytes() - read data  from I2C bus in normal mode.
 | 
						|
 * @i2c_adap:	Pointer to the struct i2c_adapter.
 | 
						|
 * @msgs:	Pointer to i2c_msg structure.
 | 
						|
 * @last:	specifies whether last message or not.
 | 
						|
 * @first:	specifies whether first message or not.
 | 
						|
 */
 | 
						|
static s32 pch_i2c_readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs,
 | 
						|
			     u32 last, u32 first)
 | 
						|
{
 | 
						|
	struct i2c_algo_pch_data *adap = i2c_adap->algo_data;
 | 
						|
 | 
						|
	u8 *buf;
 | 
						|
	u32 count;
 | 
						|
	u32 length;
 | 
						|
	u32 addr;
 | 
						|
	u32 addr_2_msb;
 | 
						|
	u32 addr_8_lsb;
 | 
						|
	void __iomem *p = adap->pch_base_address;
 | 
						|
	s32 rtn;
 | 
						|
 | 
						|
	length = msgs->len;
 | 
						|
	buf = msgs->buf;
 | 
						|
	addr = msgs->addr;
 | 
						|
 | 
						|
	/* enable master reception */
 | 
						|
	pch_clrbit(adap->pch_base_address, PCH_I2CCTL, I2C_TX_MODE);
 | 
						|
 | 
						|
	if (first) {
 | 
						|
		if (pch_i2c_wait_for_bus_idle(adap, BUS_IDLE_TIMEOUT) == -ETIME)
 | 
						|
			return -ETIME;
 | 
						|
	}
 | 
						|
 | 
						|
	if (msgs->flags & I2C_M_TEN) {
 | 
						|
		addr_2_msb = ((addr & I2C_MSB_2B_MSK) >> 7);
 | 
						|
		iowrite32(addr_2_msb | TEN_BIT_ADDR_MASK, p + PCH_I2CDR);
 | 
						|
		if (first)
 | 
						|
			pch_i2c_start(adap);
 | 
						|
 | 
						|
		rtn = pch_i2c_wait_for_check_xfer(adap);
 | 
						|
		if (rtn)
 | 
						|
			return rtn;
 | 
						|
 | 
						|
		addr_8_lsb = (addr & I2C_ADDR_MSK);
 | 
						|
		iowrite32(addr_8_lsb, p + PCH_I2CDR);
 | 
						|
 | 
						|
		pch_i2c_restart(adap);
 | 
						|
 | 
						|
		rtn = pch_i2c_wait_for_check_xfer(adap);
 | 
						|
		if (rtn)
 | 
						|
			return rtn;
 | 
						|
 | 
						|
		addr_2_msb |= I2C_RD;
 | 
						|
		iowrite32(addr_2_msb | TEN_BIT_ADDR_MASK, p + PCH_I2CDR);
 | 
						|
	} else {
 | 
						|
		/* 7 address bits + R/W bit */
 | 
						|
		addr = (((addr) << 1) | (I2C_RD));
 | 
						|
		iowrite32(addr, p + PCH_I2CDR);
 | 
						|
	}
 | 
						|
 | 
						|
	/* check if it is the first message */
 | 
						|
	if (first)
 | 
						|
		pch_i2c_start(adap);
 | 
						|
 | 
						|
	rtn = pch_i2c_wait_for_check_xfer(adap);
 | 
						|
	if (rtn)
 | 
						|
		return rtn;
 | 
						|
 | 
						|
	if (length == 0) {
 | 
						|
		pch_i2c_stop(adap);
 | 
						|
		ioread32(p + PCH_I2CDR); /* Dummy read needs */
 | 
						|
 | 
						|
		count = length;
 | 
						|
	} else {
 | 
						|
		int read_index;
 | 
						|
		int loop;
 | 
						|
		pch_i2c_sendack(adap);
 | 
						|
 | 
						|
		/* Dummy read */
 | 
						|
		for (loop = 1, read_index = 0; loop < length; loop++) {
 | 
						|
			buf[read_index] = ioread32(p + PCH_I2CDR);
 | 
						|
 | 
						|
			if (loop != 1)
 | 
						|
				read_index++;
 | 
						|
 | 
						|
			rtn = pch_i2c_wait_for_check_xfer(adap);
 | 
						|
			if (rtn)
 | 
						|
				return rtn;
 | 
						|
		}	/* end for */
 | 
						|
 | 
						|
		pch_i2c_sendnack(adap);
 | 
						|
 | 
						|
		buf[read_index] = ioread32(p + PCH_I2CDR); /* Read final - 1 */
 | 
						|
 | 
						|
		if (length != 1)
 | 
						|
			read_index++;
 | 
						|
 | 
						|
		rtn = pch_i2c_wait_for_check_xfer(adap);
 | 
						|
		if (rtn)
 | 
						|
			return rtn;
 | 
						|
 | 
						|
		if (last)
 | 
						|
			pch_i2c_stop(adap);
 | 
						|
		else
 | 
						|
			pch_i2c_repstart(adap);
 | 
						|
 | 
						|
		buf[read_index++] = ioread32(p + PCH_I2CDR); /* Read Final */
 | 
						|
		count = read_index;
 | 
						|
	}
 | 
						|
 | 
						|
	return count;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * pch_i2c_cb() - Interrupt handler Call back function
 | 
						|
 * @adap:	Pointer to struct i2c_algo_pch_data.
 | 
						|
 */
 | 
						|
static void pch_i2c_cb(struct i2c_algo_pch_data *adap)
 | 
						|
{
 | 
						|
	u32 sts;
 | 
						|
	void __iomem *p = adap->pch_base_address;
 | 
						|
 | 
						|
	sts = ioread32(p + PCH_I2CSR);
 | 
						|
	sts &= (I2CMAL_BIT | I2CMCF_BIT | I2CMIF_BIT);
 | 
						|
	if (sts & I2CMAL_BIT)
 | 
						|
		adap->pch_event_flag |= I2CMAL_EVENT;
 | 
						|
 | 
						|
	if (sts & I2CMCF_BIT)
 | 
						|
		adap->pch_event_flag |= I2CMCF_EVENT;
 | 
						|
 | 
						|
	/* clear the applicable bits */
 | 
						|
	pch_clrbit(adap->pch_base_address, PCH_I2CSR, sts);
 | 
						|
 | 
						|
	pch_dbg(adap, "PCH_I2CSR = %x\n", ioread32(p + PCH_I2CSR));
 | 
						|
 | 
						|
	wake_up(&pch_event);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * pch_i2c_handler() - interrupt handler for the PCH I2C controller
 | 
						|
 * @irq:	irq number.
 | 
						|
 * @pData:	cookie passed back to the handler function.
 | 
						|
 */
 | 
						|
static irqreturn_t pch_i2c_handler(int irq, void *pData)
 | 
						|
{
 | 
						|
	u32 reg_val;
 | 
						|
	int flag;
 | 
						|
	int i;
 | 
						|
	struct adapter_info *adap_info = pData;
 | 
						|
	void __iomem *p;
 | 
						|
	u32 mode;
 | 
						|
 | 
						|
	for (i = 0, flag = 0; i < adap_info->ch_num; i++) {
 | 
						|
		p = adap_info->pch_data[i].pch_base_address;
 | 
						|
		mode = ioread32(p + PCH_I2CMOD);
 | 
						|
		mode &= BUFFER_MODE | EEPROM_SR_MODE;
 | 
						|
		if (mode != NORMAL_MODE) {
 | 
						|
			pch_err(adap_info->pch_data,
 | 
						|
				"I2C-%d mode(%d) is not supported\n", mode, i);
 | 
						|
			continue;
 | 
						|
		}
 | 
						|
		reg_val = ioread32(p + PCH_I2CSR);
 | 
						|
		if (reg_val & (I2CMAL_BIT | I2CMCF_BIT | I2CMIF_BIT)) {
 | 
						|
			pch_i2c_cb(&adap_info->pch_data[i]);
 | 
						|
			flag = 1;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	return flag ? IRQ_HANDLED : IRQ_NONE;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * pch_i2c_xfer() - Reading adnd writing data through I2C bus
 | 
						|
 * @i2c_adap:	Pointer to the struct i2c_adapter.
 | 
						|
 * @msgs:	Pointer to i2c_msg structure.
 | 
						|
 * @num:	number of messages.
 | 
						|
 */
 | 
						|
static s32 pch_i2c_xfer(struct i2c_adapter *i2c_adap,
 | 
						|
			struct i2c_msg *msgs, s32 num)
 | 
						|
{
 | 
						|
	struct i2c_msg *pmsg;
 | 
						|
	u32 i = 0;
 | 
						|
	u32 status;
 | 
						|
	s32 ret;
 | 
						|
 | 
						|
	struct i2c_algo_pch_data *adap = i2c_adap->algo_data;
 | 
						|
 | 
						|
	ret = mutex_lock_interruptible(&pch_mutex);
 | 
						|
	if (ret)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	if (adap->p_adapter_info->pch_i2c_suspended) {
 | 
						|
		mutex_unlock(&pch_mutex);
 | 
						|
		return -EBUSY;
 | 
						|
	}
 | 
						|
 | 
						|
	pch_dbg(adap, "adap->p_adapter_info->pch_i2c_suspended is %d\n",
 | 
						|
		adap->p_adapter_info->pch_i2c_suspended);
 | 
						|
	/* transfer not completed */
 | 
						|
	adap->pch_i2c_xfer_in_progress = true;
 | 
						|
 | 
						|
	for (i = 0; i < num && ret >= 0; i++) {
 | 
						|
		pmsg = &msgs[i];
 | 
						|
		pmsg->flags |= adap->pch_buff_mode_en;
 | 
						|
		status = pmsg->flags;
 | 
						|
		pch_dbg(adap,
 | 
						|
			"After invoking I2C_MODE_SEL :flag= 0x%x\n", status);
 | 
						|
 | 
						|
		if ((status & (I2C_M_RD)) != false) {
 | 
						|
			ret = pch_i2c_readbytes(i2c_adap, pmsg, (i + 1 == num),
 | 
						|
						(i == 0));
 | 
						|
		} else {
 | 
						|
			ret = pch_i2c_writebytes(i2c_adap, pmsg, (i + 1 == num),
 | 
						|
						 (i == 0));
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	adap->pch_i2c_xfer_in_progress = false;	/* transfer completed */
 | 
						|
 | 
						|
	mutex_unlock(&pch_mutex);
 | 
						|
 | 
						|
	return (ret < 0) ? ret : num;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * pch_i2c_func() - return the functionality of the I2C driver
 | 
						|
 * @adap:	Pointer to struct i2c_algo_pch_data.
 | 
						|
 */
 | 
						|
static u32 pch_i2c_func(struct i2c_adapter *adap)
 | 
						|
{
 | 
						|
	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR;
 | 
						|
}
 | 
						|
 | 
						|
static struct i2c_algorithm pch_algorithm = {
 | 
						|
	.master_xfer = pch_i2c_xfer,
 | 
						|
	.functionality = pch_i2c_func
 | 
						|
};
 | 
						|
 | 
						|
/**
 | 
						|
 * pch_i2c_disbl_int() - Disable PCH I2C interrupts
 | 
						|
 * @adap:	Pointer to struct i2c_algo_pch_data.
 | 
						|
 */
 | 
						|
static void pch_i2c_disbl_int(struct i2c_algo_pch_data *adap)
 | 
						|
{
 | 
						|
	void __iomem *p = adap->pch_base_address;
 | 
						|
 | 
						|
	pch_clrbit(adap->pch_base_address, PCH_I2CCTL, NORMAL_INTR_ENBL);
 | 
						|
 | 
						|
	iowrite32(EEPROM_RST_INTR_DISBL, p + PCH_I2CESRMSK);
 | 
						|
 | 
						|
	iowrite32(BUFFER_MODE_INTR_DISBL, p + PCH_I2CBUFMSK);
 | 
						|
}
 | 
						|
 | 
						|
static int pch_i2c_probe(struct pci_dev *pdev,
 | 
						|
				   const struct pci_device_id *id)
 | 
						|
{
 | 
						|
	void __iomem *base_addr;
 | 
						|
	int ret;
 | 
						|
	int i, j;
 | 
						|
	struct adapter_info *adap_info;
 | 
						|
	struct i2c_adapter *pch_adap;
 | 
						|
 | 
						|
	pch_pci_dbg(pdev, "Entered.\n");
 | 
						|
 | 
						|
	adap_info = kzalloc((sizeof(struct adapter_info)), GFP_KERNEL);
 | 
						|
	if (adap_info == NULL) {
 | 
						|
		pch_pci_err(pdev, "Memory allocation FAILED\n");
 | 
						|
		return -ENOMEM;
 | 
						|
	}
 | 
						|
 | 
						|
	ret = pci_enable_device(pdev);
 | 
						|
	if (ret) {
 | 
						|
		pch_pci_err(pdev, "pci_enable_device FAILED\n");
 | 
						|
		goto err_pci_enable;
 | 
						|
	}
 | 
						|
 | 
						|
	ret = pci_request_regions(pdev, KBUILD_MODNAME);
 | 
						|
	if (ret) {
 | 
						|
		pch_pci_err(pdev, "pci_request_regions FAILED\n");
 | 
						|
		goto err_pci_req;
 | 
						|
	}
 | 
						|
 | 
						|
	base_addr = pci_iomap(pdev, 1, 0);
 | 
						|
 | 
						|
	if (base_addr == NULL) {
 | 
						|
		pch_pci_err(pdev, "pci_iomap FAILED\n");
 | 
						|
		ret = -ENOMEM;
 | 
						|
		goto err_pci_iomap;
 | 
						|
	}
 | 
						|
 | 
						|
	/* Set the number of I2C channel instance */
 | 
						|
	adap_info->ch_num = id->driver_data;
 | 
						|
 | 
						|
	ret = request_irq(pdev->irq, pch_i2c_handler, IRQF_SHARED,
 | 
						|
		  KBUILD_MODNAME, adap_info);
 | 
						|
	if (ret) {
 | 
						|
		pch_pci_err(pdev, "request_irq FAILED\n");
 | 
						|
		goto err_request_irq;
 | 
						|
	}
 | 
						|
 | 
						|
	for (i = 0; i < adap_info->ch_num; i++) {
 | 
						|
		pch_adap = &adap_info->pch_data[i].pch_adapter;
 | 
						|
		adap_info->pch_i2c_suspended = false;
 | 
						|
 | 
						|
		adap_info->pch_data[i].p_adapter_info = adap_info;
 | 
						|
 | 
						|
		pch_adap->owner = THIS_MODULE;
 | 
						|
		pch_adap->class = I2C_CLASS_HWMON;
 | 
						|
		strlcpy(pch_adap->name, KBUILD_MODNAME, sizeof(pch_adap->name));
 | 
						|
		pch_adap->algo = &pch_algorithm;
 | 
						|
		pch_adap->algo_data = &adap_info->pch_data[i];
 | 
						|
 | 
						|
		/* base_addr + offset; */
 | 
						|
		adap_info->pch_data[i].pch_base_address = base_addr + 0x100 * i;
 | 
						|
 | 
						|
		pch_adap->dev.parent = &pdev->dev;
 | 
						|
 | 
						|
		pch_i2c_init(&adap_info->pch_data[i]);
 | 
						|
 | 
						|
		pch_adap->nr = i;
 | 
						|
		ret = i2c_add_numbered_adapter(pch_adap);
 | 
						|
		if (ret) {
 | 
						|
			pch_pci_err(pdev, "i2c_add_adapter[ch:%d] FAILED\n", i);
 | 
						|
			goto err_add_adapter;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	pci_set_drvdata(pdev, adap_info);
 | 
						|
	pch_pci_dbg(pdev, "returns %d.\n", ret);
 | 
						|
	return 0;
 | 
						|
 | 
						|
err_add_adapter:
 | 
						|
	for (j = 0; j < i; j++)
 | 
						|
		i2c_del_adapter(&adap_info->pch_data[j].pch_adapter);
 | 
						|
	free_irq(pdev->irq, adap_info);
 | 
						|
err_request_irq:
 | 
						|
	pci_iounmap(pdev, base_addr);
 | 
						|
err_pci_iomap:
 | 
						|
	pci_release_regions(pdev);
 | 
						|
err_pci_req:
 | 
						|
	pci_disable_device(pdev);
 | 
						|
err_pci_enable:
 | 
						|
	kfree(adap_info);
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static void pch_i2c_remove(struct pci_dev *pdev)
 | 
						|
{
 | 
						|
	int i;
 | 
						|
	struct adapter_info *adap_info = pci_get_drvdata(pdev);
 | 
						|
 | 
						|
	free_irq(pdev->irq, adap_info);
 | 
						|
 | 
						|
	for (i = 0; i < adap_info->ch_num; i++) {
 | 
						|
		pch_i2c_disbl_int(&adap_info->pch_data[i]);
 | 
						|
		i2c_del_adapter(&adap_info->pch_data[i].pch_adapter);
 | 
						|
	}
 | 
						|
 | 
						|
	if (adap_info->pch_data[0].pch_base_address)
 | 
						|
		pci_iounmap(pdev, adap_info->pch_data[0].pch_base_address);
 | 
						|
 | 
						|
	for (i = 0; i < adap_info->ch_num; i++)
 | 
						|
		adap_info->pch_data[i].pch_base_address = NULL;
 | 
						|
 | 
						|
	pci_set_drvdata(pdev, NULL);
 | 
						|
 | 
						|
	pci_release_regions(pdev);
 | 
						|
 | 
						|
	pci_disable_device(pdev);
 | 
						|
	kfree(adap_info);
 | 
						|
}
 | 
						|
 | 
						|
#ifdef CONFIG_PM
 | 
						|
static int pch_i2c_suspend(struct pci_dev *pdev, pm_message_t state)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
	int i;
 | 
						|
	struct adapter_info *adap_info = pci_get_drvdata(pdev);
 | 
						|
	void __iomem *p = adap_info->pch_data[0].pch_base_address;
 | 
						|
 | 
						|
	adap_info->pch_i2c_suspended = true;
 | 
						|
 | 
						|
	for (i = 0; i < adap_info->ch_num; i++) {
 | 
						|
		while ((adap_info->pch_data[i].pch_i2c_xfer_in_progress)) {
 | 
						|
			/* Wait until all channel transfers are completed */
 | 
						|
			msleep(20);
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	/* Disable the i2c interrupts */
 | 
						|
	for (i = 0; i < adap_info->ch_num; i++)
 | 
						|
		pch_i2c_disbl_int(&adap_info->pch_data[i]);
 | 
						|
 | 
						|
	pch_pci_dbg(pdev, "I2CSR = %x I2CBUFSTA = %x I2CESRSTA = %x "
 | 
						|
		"invoked function pch_i2c_disbl_int successfully\n",
 | 
						|
		ioread32(p + PCH_I2CSR), ioread32(p + PCH_I2CBUFSTA),
 | 
						|
		ioread32(p + PCH_I2CESRSTA));
 | 
						|
 | 
						|
	ret = pci_save_state(pdev);
 | 
						|
 | 
						|
	if (ret) {
 | 
						|
		pch_pci_err(pdev, "pci_save_state\n");
 | 
						|
		return ret;
 | 
						|
	}
 | 
						|
 | 
						|
	pci_enable_wake(pdev, PCI_D3hot, 0);
 | 
						|
	pci_disable_device(pdev);
 | 
						|
	pci_set_power_state(pdev, pci_choose_state(pdev, state));
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int pch_i2c_resume(struct pci_dev *pdev)
 | 
						|
{
 | 
						|
	int i;
 | 
						|
	struct adapter_info *adap_info = pci_get_drvdata(pdev);
 | 
						|
 | 
						|
	pci_set_power_state(pdev, PCI_D0);
 | 
						|
	pci_restore_state(pdev);
 | 
						|
 | 
						|
	if (pci_enable_device(pdev) < 0) {
 | 
						|
		pch_pci_err(pdev, "pch_i2c_resume:pci_enable_device FAILED\n");
 | 
						|
		return -EIO;
 | 
						|
	}
 | 
						|
 | 
						|
	pci_enable_wake(pdev, PCI_D3hot, 0);
 | 
						|
 | 
						|
	for (i = 0; i < adap_info->ch_num; i++)
 | 
						|
		pch_i2c_init(&adap_info->pch_data[i]);
 | 
						|
 | 
						|
	adap_info->pch_i2c_suspended = false;
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
#else
 | 
						|
#define pch_i2c_suspend NULL
 | 
						|
#define pch_i2c_resume NULL
 | 
						|
#endif
 | 
						|
 | 
						|
static struct pci_driver pch_pcidriver = {
 | 
						|
	.name = KBUILD_MODNAME,
 | 
						|
	.id_table = pch_pcidev_id,
 | 
						|
	.probe = pch_i2c_probe,
 | 
						|
	.remove = pch_i2c_remove,
 | 
						|
	.suspend = pch_i2c_suspend,
 | 
						|
	.resume = pch_i2c_resume
 | 
						|
};
 | 
						|
 | 
						|
module_pci_driver(pch_pcidriver);
 | 
						|
 | 
						|
MODULE_DESCRIPTION("Intel EG20T PCH/LAPIS Semico ML7213/ML7223/ML7831 IOH I2C");
 | 
						|
MODULE_LICENSE("GPL");
 | 
						|
MODULE_AUTHOR("Tomoya MORINAGA. <tomoya.rohm@gmail.com>");
 | 
						|
module_param(pch_i2c_speed, int, (S_IRUSR | S_IWUSR));
 | 
						|
module_param(pch_clk, int, (S_IRUSR | S_IWUSR));
 |