c6007ffe84
DaVinci clock implementation does not support clock enable/disable functionality on non-PSC clock nodes. On DA850 SoC, EHRPWM module requires support for enable/disable of TBCLK controlled using a system module register. This patch adds a method for enabling/disabling non-PSC clocks into DaVinci clock implementation. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
140 lines
3.9 KiB
C
140 lines
3.9 KiB
C
/*
|
|
* TI DaVinci clock definitions
|
|
*
|
|
* Copyright (C) 2006-2007 Texas Instruments.
|
|
* Copyright (C) 2008-2009 Deep Root Systems, LLC
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#ifndef __ARCH_ARM_DAVINCI_CLOCK_H
|
|
#define __ARCH_ARM_DAVINCI_CLOCK_H
|
|
|
|
#define DAVINCI_PLL1_BASE 0x01c40800
|
|
#define DAVINCI_PLL2_BASE 0x01c40c00
|
|
#define MAX_PLL 2
|
|
|
|
/* PLL/Reset register offsets */
|
|
#define PLLCTL 0x100
|
|
#define PLLCTL_PLLEN BIT(0)
|
|
#define PLLCTL_PLLPWRDN BIT(1)
|
|
#define PLLCTL_PLLRST BIT(3)
|
|
#define PLLCTL_PLLDIS BIT(4)
|
|
#define PLLCTL_PLLENSRC BIT(5)
|
|
#define PLLCTL_CLKMODE BIT(8)
|
|
|
|
#define PLLM 0x110
|
|
#define PLLM_PLLM_MASK 0xff
|
|
|
|
#define PREDIV 0x114
|
|
#define PLLDIV1 0x118
|
|
#define PLLDIV2 0x11c
|
|
#define PLLDIV3 0x120
|
|
#define POSTDIV 0x128
|
|
#define BPDIV 0x12c
|
|
#define PLLCMD 0x138
|
|
#define PLLSTAT 0x13c
|
|
#define PLLALNCTL 0x140
|
|
#define PLLDCHANGE 0x144
|
|
#define PLLCKEN 0x148
|
|
#define PLLCKSTAT 0x14c
|
|
#define PLLSYSTAT 0x150
|
|
#define PLLDIV4 0x160
|
|
#define PLLDIV5 0x164
|
|
#define PLLDIV6 0x168
|
|
#define PLLDIV7 0x16c
|
|
#define PLLDIV8 0x170
|
|
#define PLLDIV9 0x174
|
|
#define PLLDIV_EN BIT(15)
|
|
#define PLLDIV_RATIO_MASK 0x1f
|
|
|
|
/*
|
|
* OMAP-L138 system reference guide recommends a wait for 4 OSCIN/CLKIN
|
|
* cycles to ensure that the PLLC has switched to bypass mode. Delay of 1us
|
|
* ensures we are good for all > 4MHz OSCIN/CLKIN inputs. Typically the input
|
|
* is ~25MHz. Units are micro seconds.
|
|
*/
|
|
#define PLL_BYPASS_TIME 1
|
|
/* From OMAP-L138 datasheet table 6-4. Units are micro seconds */
|
|
#define PLL_RESET_TIME 1
|
|
/*
|
|
* From OMAP-L138 datasheet table 6-4; assuming prediv = 1, sqrt(pllm) = 4
|
|
* Units are micro seconds.
|
|
*/
|
|
#define PLL_LOCK_TIME 20
|
|
|
|
#ifndef __ASSEMBLER__
|
|
|
|
#include <linux/list.h>
|
|
#include <linux/clkdev.h>
|
|
|
|
#define PLLSTAT_GOSTAT BIT(0)
|
|
#define PLLCMD_GOSET BIT(0)
|
|
|
|
struct pll_data {
|
|
u32 phys_base;
|
|
void __iomem *base;
|
|
u32 num;
|
|
u32 flags;
|
|
u32 input_rate;
|
|
u32 div_ratio_mask;
|
|
};
|
|
#define PLL_HAS_PREDIV 0x01
|
|
#define PLL_HAS_POSTDIV 0x02
|
|
|
|
struct clk {
|
|
struct list_head node;
|
|
struct module *owner;
|
|
const char *name;
|
|
unsigned long rate;
|
|
unsigned long maxrate; /* H/W supported max rate */
|
|
u8 usecount;
|
|
u8 lpsc;
|
|
u8 gpsc;
|
|
u8 domain;
|
|
u32 flags;
|
|
struct clk *parent;
|
|
struct list_head children; /* list of children */
|
|
struct list_head childnode; /* parent's child list node */
|
|
struct pll_data *pll_data;
|
|
u32 div_reg;
|
|
unsigned long (*recalc) (struct clk *);
|
|
int (*set_rate) (struct clk *clk, unsigned long rate);
|
|
int (*round_rate) (struct clk *clk, unsigned long rate);
|
|
int (*reset) (struct clk *clk, bool reset);
|
|
void (*clk_enable) (struct clk *clk);
|
|
void (*clk_disable) (struct clk *clk);
|
|
};
|
|
|
|
/* Clock flags: SoC-specific flags start at BIT(16) */
|
|
#define ALWAYS_ENABLED BIT(1)
|
|
#define CLK_PSC BIT(2)
|
|
#define CLK_PLL BIT(3) /* PLL-derived clock */
|
|
#define PRE_PLL BIT(4) /* source is before PLL mult/div */
|
|
#define PSC_SWRSTDISABLE BIT(5) /* Disable state is SwRstDisable */
|
|
#define PSC_FORCE BIT(6) /* Force module state transtition */
|
|
#define PSC_LRST BIT(8) /* Use local reset on enable/disable */
|
|
|
|
#define CLK(dev, con, ck) \
|
|
{ \
|
|
.dev_id = dev, \
|
|
.con_id = con, \
|
|
.clk = ck, \
|
|
} \
|
|
|
|
int davinci_clk_init(struct clk_lookup *clocks);
|
|
int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv,
|
|
unsigned int mult, unsigned int postdiv);
|
|
int davinci_set_sysclk_rate(struct clk *clk, unsigned long rate);
|
|
int davinci_set_refclk_rate(unsigned long rate);
|
|
int davinci_simple_set_rate(struct clk *clk, unsigned long rate);
|
|
int davinci_clk_reset(struct clk *clk, bool reset);
|
|
|
|
extern struct platform_device davinci_wdt_device;
|
|
extern void davinci_watchdog_reset(struct platform_device *);
|
|
|
|
#endif
|
|
|
|
#endif
|