In rx timeout ISR and tasklet, we don't issue new dma desc as rx_done ISR will do that. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
		
			
				
	
	
		
			1575 lines
		
	
	
	
		
			49 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			1575 lines
		
	
	
	
		
			49 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
/*
 | 
						|
 * Driver for CSR SiRFprimaII onboard UARTs.
 | 
						|
 *
 | 
						|
 * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
 | 
						|
 *
 | 
						|
 * Licensed under GPLv2 or later.
 | 
						|
 */
 | 
						|
 | 
						|
#include <linux/module.h>
 | 
						|
#include <linux/ioport.h>
 | 
						|
#include <linux/platform_device.h>
 | 
						|
#include <linux/init.h>
 | 
						|
#include <linux/sysrq.h>
 | 
						|
#include <linux/console.h>
 | 
						|
#include <linux/tty.h>
 | 
						|
#include <linux/tty_flip.h>
 | 
						|
#include <linux/serial_core.h>
 | 
						|
#include <linux/serial.h>
 | 
						|
#include <linux/clk.h>
 | 
						|
#include <linux/of.h>
 | 
						|
#include <linux/slab.h>
 | 
						|
#include <linux/io.h>
 | 
						|
#include <linux/of_gpio.h>
 | 
						|
#include <linux/dmaengine.h>
 | 
						|
#include <linux/dma-direction.h>
 | 
						|
#include <linux/dma-mapping.h>
 | 
						|
#include <linux/sirfsoc_dma.h>
 | 
						|
#include <asm/irq.h>
 | 
						|
#include <asm/mach/irq.h>
 | 
						|
 | 
						|
#include "sirfsoc_uart.h"
 | 
						|
 | 
						|
static unsigned int
 | 
						|
sirfsoc_uart_pio_tx_chars(struct sirfsoc_uart_port *sirfport, int count);
 | 
						|
static unsigned int
 | 
						|
sirfsoc_uart_pio_rx_chars(struct uart_port *port, unsigned int max_rx_count);
 | 
						|
static struct uart_driver sirfsoc_uart_drv;
 | 
						|
 | 
						|
static void sirfsoc_uart_tx_dma_complete_callback(void *param);
 | 
						|
static void sirfsoc_uart_start_next_rx_dma(struct uart_port *port);
 | 
						|
static void sirfsoc_uart_rx_dma_complete_callback(void *param);
 | 
						|
static const struct sirfsoc_baudrate_to_regv baudrate_to_regv[] = {
 | 
						|
	{4000000, 2359296},
 | 
						|
	{3500000, 1310721},
 | 
						|
	{3000000, 1572865},
 | 
						|
	{2500000, 1245186},
 | 
						|
	{2000000, 1572866},
 | 
						|
	{1500000, 1245188},
 | 
						|
	{1152000, 1638404},
 | 
						|
	{1000000, 1572869},
 | 
						|
	{921600, 1114120},
 | 
						|
	{576000, 1245196},
 | 
						|
	{500000, 1245198},
 | 
						|
	{460800, 1572876},
 | 
						|
	{230400, 1310750},
 | 
						|
	{115200, 1310781},
 | 
						|
	{57600, 1310843},
 | 
						|
	{38400, 1114328},
 | 
						|
	{19200, 1114545},
 | 
						|
	{9600, 1114979},
 | 
						|
};
 | 
						|
 | 
						|
static struct sirfsoc_uart_port sirfsoc_uart_ports[SIRFSOC_UART_NR] = {
 | 
						|
	[0] = {
 | 
						|
		.port = {
 | 
						|
			.iotype		= UPIO_MEM,
 | 
						|
			.flags		= UPF_BOOT_AUTOCONF,
 | 
						|
			.line		= 0,
 | 
						|
		},
 | 
						|
	},
 | 
						|
	[1] = {
 | 
						|
		.port = {
 | 
						|
			.iotype		= UPIO_MEM,
 | 
						|
			.flags		= UPF_BOOT_AUTOCONF,
 | 
						|
			.line		= 1,
 | 
						|
		},
 | 
						|
	},
 | 
						|
	[2] = {
 | 
						|
		.port = {
 | 
						|
			.iotype		= UPIO_MEM,
 | 
						|
			.flags		= UPF_BOOT_AUTOCONF,
 | 
						|
			.line		= 2,
 | 
						|
		},
 | 
						|
	},
 | 
						|
	[3] = {
 | 
						|
		.port = {
 | 
						|
			.iotype		= UPIO_MEM,
 | 
						|
			.flags		= UPF_BOOT_AUTOCONF,
 | 
						|
			.line		= 3,
 | 
						|
		},
 | 
						|
	},
 | 
						|
	[4] = {
 | 
						|
		.port = {
 | 
						|
			.iotype		= UPIO_MEM,
 | 
						|
			.flags		= UPF_BOOT_AUTOCONF,
 | 
						|
			.line		= 4,
 | 
						|
		},
 | 
						|
	},
 | 
						|
	[5] = {
 | 
						|
		.port = {
 | 
						|
			.iotype		= UPIO_MEM,
 | 
						|
			.flags		= UPF_BOOT_AUTOCONF,
 | 
						|
			.line		= 5,
 | 
						|
		},
 | 
						|
	},
 | 
						|
};
 | 
						|
 | 
						|
static inline struct sirfsoc_uart_port *to_sirfport(struct uart_port *port)
 | 
						|
{
 | 
						|
	return container_of(port, struct sirfsoc_uart_port, port);
 | 
						|
}
 | 
						|
 | 
						|
static inline unsigned int sirfsoc_uart_tx_empty(struct uart_port *port)
 | 
						|
{
 | 
						|
	unsigned long reg;
 | 
						|
	struct sirfsoc_uart_port *sirfport = to_sirfport(port);
 | 
						|
	struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
 | 
						|
	struct sirfsoc_fifo_status *ufifo_st = &sirfport->uart_reg->fifo_status;
 | 
						|
	reg = rd_regl(port, ureg->sirfsoc_tx_fifo_status);
 | 
						|
 | 
						|
	return (reg & ufifo_st->ff_empty(port->line)) ? TIOCSER_TEMT : 0;
 | 
						|
}
 | 
						|
 | 
						|
static unsigned int sirfsoc_uart_get_mctrl(struct uart_port *port)
 | 
						|
{
 | 
						|
	struct sirfsoc_uart_port *sirfport = to_sirfport(port);
 | 
						|
	struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
 | 
						|
	if (!sirfport->hw_flow_ctrl || !sirfport->ms_enabled)
 | 
						|
		goto cts_asserted;
 | 
						|
	if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) {
 | 
						|
		if (!(rd_regl(port, ureg->sirfsoc_afc_ctrl) &
 | 
						|
						SIRFUART_AFC_CTS_STATUS))
 | 
						|
			goto cts_asserted;
 | 
						|
		else
 | 
						|
			goto cts_deasserted;
 | 
						|
	} else {
 | 
						|
		if (!gpio_get_value(sirfport->cts_gpio))
 | 
						|
			goto cts_asserted;
 | 
						|
		else
 | 
						|
			goto cts_deasserted;
 | 
						|
	}
 | 
						|
cts_deasserted:
 | 
						|
	return TIOCM_CAR | TIOCM_DSR;
 | 
						|
cts_asserted:
 | 
						|
	return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
 | 
						|
}
 | 
						|
 | 
						|
static void sirfsoc_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
 | 
						|
{
 | 
						|
	struct sirfsoc_uart_port *sirfport = to_sirfport(port);
 | 
						|
	struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
 | 
						|
	unsigned int assert = mctrl & TIOCM_RTS;
 | 
						|
	unsigned int val = assert ? SIRFUART_AFC_CTRL_RX_THD : 0x0;
 | 
						|
	unsigned int current_val;
 | 
						|
 | 
						|
	if (!sirfport->hw_flow_ctrl || !sirfport->ms_enabled)
 | 
						|
		return;
 | 
						|
	if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) {
 | 
						|
		current_val = rd_regl(port, ureg->sirfsoc_afc_ctrl) & ~0xFF;
 | 
						|
		val |= current_val;
 | 
						|
		wr_regl(port, ureg->sirfsoc_afc_ctrl, val);
 | 
						|
	} else {
 | 
						|
		if (!val)
 | 
						|
			gpio_set_value(sirfport->rts_gpio, 1);
 | 
						|
		else
 | 
						|
			gpio_set_value(sirfport->rts_gpio, 0);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static void sirfsoc_uart_stop_tx(struct uart_port *port)
 | 
						|
{
 | 
						|
	struct sirfsoc_uart_port *sirfport = to_sirfport(port);
 | 
						|
	struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
 | 
						|
	struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
 | 
						|
 | 
						|
	if (IS_DMA_CHAN_VALID(sirfport->tx_dma_no)) {
 | 
						|
		if (sirfport->tx_dma_state == TX_DMA_RUNNING) {
 | 
						|
			dmaengine_pause(sirfport->tx_dma_chan);
 | 
						|
			sirfport->tx_dma_state = TX_DMA_PAUSE;
 | 
						|
		} else {
 | 
						|
			if (!sirfport->is_marco)
 | 
						|
				wr_regl(port, ureg->sirfsoc_int_en_reg,
 | 
						|
				rd_regl(port, ureg->sirfsoc_int_en_reg) &
 | 
						|
				~uint_en->sirfsoc_txfifo_empty_en);
 | 
						|
			else
 | 
						|
				wr_regl(port, SIRFUART_INT_EN_CLR,
 | 
						|
				uint_en->sirfsoc_txfifo_empty_en);
 | 
						|
		}
 | 
						|
	} else {
 | 
						|
		if (!sirfport->is_marco)
 | 
						|
			wr_regl(port, ureg->sirfsoc_int_en_reg,
 | 
						|
				rd_regl(port, ureg->sirfsoc_int_en_reg) &
 | 
						|
				~uint_en->sirfsoc_txfifo_empty_en);
 | 
						|
		else
 | 
						|
			wr_regl(port, SIRFUART_INT_EN_CLR,
 | 
						|
				uint_en->sirfsoc_txfifo_empty_en);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static void sirfsoc_uart_tx_with_dma(struct sirfsoc_uart_port *sirfport)
 | 
						|
{
 | 
						|
	struct uart_port *port = &sirfport->port;
 | 
						|
	struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
 | 
						|
	struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
 | 
						|
	struct circ_buf *xmit = &port->state->xmit;
 | 
						|
	unsigned long tran_size;
 | 
						|
	unsigned long tran_start;
 | 
						|
	unsigned long pio_tx_size;
 | 
						|
 | 
						|
	tran_size = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
 | 
						|
	tran_start = (unsigned long)(xmit->buf + xmit->tail);
 | 
						|
	if (uart_circ_empty(xmit) || uart_tx_stopped(port) ||
 | 
						|
			!tran_size)
 | 
						|
		return;
 | 
						|
	if (sirfport->tx_dma_state == TX_DMA_PAUSE) {
 | 
						|
		dmaengine_resume(sirfport->tx_dma_chan);
 | 
						|
		return;
 | 
						|
	}
 | 
						|
	if (sirfport->tx_dma_state == TX_DMA_RUNNING)
 | 
						|
		return;
 | 
						|
	if (!sirfport->is_marco)
 | 
						|
		wr_regl(port, ureg->sirfsoc_int_en_reg,
 | 
						|
				rd_regl(port, ureg->sirfsoc_int_en_reg)&
 | 
						|
				~(uint_en->sirfsoc_txfifo_empty_en));
 | 
						|
	else
 | 
						|
		wr_regl(port, SIRFUART_INT_EN_CLR,
 | 
						|
				uint_en->sirfsoc_txfifo_empty_en);
 | 
						|
	/*
 | 
						|
	 * DMA requires buffer address and buffer length are both aligned with
 | 
						|
	 * 4 bytes, so we use PIO for
 | 
						|
	 * 1. if address is not aligned with 4bytes, use PIO for the first 1~3
 | 
						|
	 * bytes, and move to DMA for the left part aligned with 4bytes
 | 
						|
	 * 2. if buffer length is not aligned with 4bytes, use DMA for aligned
 | 
						|
	 * part first, move to PIO for the left 1~3 bytes
 | 
						|
	 */
 | 
						|
	if (tran_size < 4 || BYTES_TO_ALIGN(tran_start)) {
 | 
						|
		wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_STOP);
 | 
						|
		wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl,
 | 
						|
			rd_regl(port, ureg->sirfsoc_tx_dma_io_ctrl)|
 | 
						|
			SIRFUART_IO_MODE);
 | 
						|
		if (BYTES_TO_ALIGN(tran_start)) {
 | 
						|
			pio_tx_size = sirfsoc_uart_pio_tx_chars(sirfport,
 | 
						|
				BYTES_TO_ALIGN(tran_start));
 | 
						|
			tran_size -= pio_tx_size;
 | 
						|
		}
 | 
						|
		if (tran_size < 4)
 | 
						|
			sirfsoc_uart_pio_tx_chars(sirfport, tran_size);
 | 
						|
		if (!sirfport->is_marco)
 | 
						|
			wr_regl(port, ureg->sirfsoc_int_en_reg,
 | 
						|
				rd_regl(port, ureg->sirfsoc_int_en_reg)|
 | 
						|
				uint_en->sirfsoc_txfifo_empty_en);
 | 
						|
		else
 | 
						|
			wr_regl(port, ureg->sirfsoc_int_en_reg,
 | 
						|
				uint_en->sirfsoc_txfifo_empty_en);
 | 
						|
		wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_START);
 | 
						|
	} else {
 | 
						|
		/* tx transfer mode switch into dma mode */
 | 
						|
		wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_STOP);
 | 
						|
		wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl,
 | 
						|
			rd_regl(port, ureg->sirfsoc_tx_dma_io_ctrl)&
 | 
						|
			~SIRFUART_IO_MODE);
 | 
						|
		wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_START);
 | 
						|
		tran_size &= ~(0x3);
 | 
						|
 | 
						|
		sirfport->tx_dma_addr = dma_map_single(port->dev,
 | 
						|
			xmit->buf + xmit->tail,
 | 
						|
			tran_size, DMA_TO_DEVICE);
 | 
						|
		sirfport->tx_dma_desc = dmaengine_prep_slave_single(
 | 
						|
			sirfport->tx_dma_chan, sirfport->tx_dma_addr,
 | 
						|
			tran_size, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT);
 | 
						|
		if (!sirfport->tx_dma_desc) {
 | 
						|
			dev_err(port->dev, "DMA prep slave single fail\n");
 | 
						|
			return;
 | 
						|
		}
 | 
						|
		sirfport->tx_dma_desc->callback =
 | 
						|
			sirfsoc_uart_tx_dma_complete_callback;
 | 
						|
		sirfport->tx_dma_desc->callback_param = (void *)sirfport;
 | 
						|
		sirfport->transfer_size = tran_size;
 | 
						|
 | 
						|
		dmaengine_submit(sirfport->tx_dma_desc);
 | 
						|
		dma_async_issue_pending(sirfport->tx_dma_chan);
 | 
						|
		sirfport->tx_dma_state = TX_DMA_RUNNING;
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static void sirfsoc_uart_start_tx(struct uart_port *port)
 | 
						|
{
 | 
						|
	struct sirfsoc_uart_port *sirfport = to_sirfport(port);
 | 
						|
	struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
 | 
						|
	struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
 | 
						|
	if (IS_DMA_CHAN_VALID(sirfport->tx_dma_no))
 | 
						|
		sirfsoc_uart_tx_with_dma(sirfport);
 | 
						|
	else {
 | 
						|
		sirfsoc_uart_pio_tx_chars(sirfport, 1);
 | 
						|
		wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_START);
 | 
						|
		if (!sirfport->is_marco)
 | 
						|
			wr_regl(port, ureg->sirfsoc_int_en_reg,
 | 
						|
					rd_regl(port, ureg->sirfsoc_int_en_reg)|
 | 
						|
					uint_en->sirfsoc_txfifo_empty_en);
 | 
						|
		else
 | 
						|
			wr_regl(port, ureg->sirfsoc_int_en_reg,
 | 
						|
					uint_en->sirfsoc_txfifo_empty_en);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static void sirfsoc_uart_stop_rx(struct uart_port *port)
 | 
						|
{
 | 
						|
	struct sirfsoc_uart_port *sirfport = to_sirfport(port);
 | 
						|
	struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
 | 
						|
	struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
 | 
						|
 | 
						|
	wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0);
 | 
						|
	if (IS_DMA_CHAN_VALID(sirfport->rx_dma_no)) {
 | 
						|
		if (!sirfport->is_marco)
 | 
						|
			wr_regl(port, ureg->sirfsoc_int_en_reg,
 | 
						|
				rd_regl(port, ureg->sirfsoc_int_en_reg) &
 | 
						|
				~(SIRFUART_RX_DMA_INT_EN(port, uint_en) |
 | 
						|
				uint_en->sirfsoc_rx_done_en));
 | 
						|
		else
 | 
						|
			wr_regl(port, SIRFUART_INT_EN_CLR,
 | 
						|
					SIRFUART_RX_DMA_INT_EN(port, uint_en)|
 | 
						|
					uint_en->sirfsoc_rx_done_en);
 | 
						|
		dmaengine_terminate_all(sirfport->rx_dma_chan);
 | 
						|
	} else {
 | 
						|
		if (!sirfport->is_marco)
 | 
						|
			wr_regl(port, ureg->sirfsoc_int_en_reg,
 | 
						|
				rd_regl(port, ureg->sirfsoc_int_en_reg)&
 | 
						|
				~(SIRFUART_RX_IO_INT_EN(port, uint_en)));
 | 
						|
		else
 | 
						|
			wr_regl(port, SIRFUART_INT_EN_CLR,
 | 
						|
					SIRFUART_RX_IO_INT_EN(port, uint_en));
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static void sirfsoc_uart_disable_ms(struct uart_port *port)
 | 
						|
{
 | 
						|
	struct sirfsoc_uart_port *sirfport = to_sirfport(port);
 | 
						|
	struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
 | 
						|
	struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
 | 
						|
 | 
						|
	if (!sirfport->hw_flow_ctrl)
 | 
						|
		return;
 | 
						|
	sirfport->ms_enabled = false;
 | 
						|
	if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) {
 | 
						|
		wr_regl(port, ureg->sirfsoc_afc_ctrl,
 | 
						|
				rd_regl(port, ureg->sirfsoc_afc_ctrl) & ~0x3FF);
 | 
						|
		if (!sirfport->is_marco)
 | 
						|
			wr_regl(port, ureg->sirfsoc_int_en_reg,
 | 
						|
					rd_regl(port, ureg->sirfsoc_int_en_reg)&
 | 
						|
					~uint_en->sirfsoc_cts_en);
 | 
						|
		else
 | 
						|
			wr_regl(port, SIRFUART_INT_EN_CLR,
 | 
						|
					uint_en->sirfsoc_cts_en);
 | 
						|
	} else
 | 
						|
		disable_irq(gpio_to_irq(sirfport->cts_gpio));
 | 
						|
}
 | 
						|
 | 
						|
static irqreturn_t sirfsoc_uart_usp_cts_handler(int irq, void *dev_id)
 | 
						|
{
 | 
						|
	struct sirfsoc_uart_port *sirfport = (struct sirfsoc_uart_port *)dev_id;
 | 
						|
	struct uart_port *port = &sirfport->port;
 | 
						|
	if (gpio_is_valid(sirfport->cts_gpio) && sirfport->ms_enabled)
 | 
						|
		uart_handle_cts_change(port,
 | 
						|
				!gpio_get_value(sirfport->cts_gpio));
 | 
						|
	return IRQ_HANDLED;
 | 
						|
}
 | 
						|
 | 
						|
static void sirfsoc_uart_enable_ms(struct uart_port *port)
 | 
						|
{
 | 
						|
	struct sirfsoc_uart_port *sirfport = to_sirfport(port);
 | 
						|
	struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
 | 
						|
	struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
 | 
						|
 | 
						|
	if (!sirfport->hw_flow_ctrl)
 | 
						|
		return;
 | 
						|
	sirfport->ms_enabled = true;
 | 
						|
	if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) {
 | 
						|
		wr_regl(port, ureg->sirfsoc_afc_ctrl,
 | 
						|
				rd_regl(port, ureg->sirfsoc_afc_ctrl) |
 | 
						|
				SIRFUART_AFC_TX_EN | SIRFUART_AFC_RX_EN);
 | 
						|
		if (!sirfport->is_marco)
 | 
						|
			wr_regl(port, ureg->sirfsoc_int_en_reg,
 | 
						|
					rd_regl(port, ureg->sirfsoc_int_en_reg)
 | 
						|
					| uint_en->sirfsoc_cts_en);
 | 
						|
		else
 | 
						|
			wr_regl(port, ureg->sirfsoc_int_en_reg,
 | 
						|
					uint_en->sirfsoc_cts_en);
 | 
						|
	} else
 | 
						|
		enable_irq(gpio_to_irq(sirfport->cts_gpio));
 | 
						|
}
 | 
						|
 | 
						|
static void sirfsoc_uart_break_ctl(struct uart_port *port, int break_state)
 | 
						|
{
 | 
						|
	struct sirfsoc_uart_port *sirfport = to_sirfport(port);
 | 
						|
	struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
 | 
						|
	if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) {
 | 
						|
		unsigned long ulcon = rd_regl(port, ureg->sirfsoc_line_ctrl);
 | 
						|
		if (break_state)
 | 
						|
			ulcon |= SIRFUART_SET_BREAK;
 | 
						|
		else
 | 
						|
			ulcon &= ~SIRFUART_SET_BREAK;
 | 
						|
		wr_regl(port, ureg->sirfsoc_line_ctrl, ulcon);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static unsigned int
 | 
						|
sirfsoc_uart_pio_rx_chars(struct uart_port *port, unsigned int max_rx_count)
 | 
						|
{
 | 
						|
	struct sirfsoc_uart_port *sirfport = to_sirfport(port);
 | 
						|
	struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
 | 
						|
	struct sirfsoc_fifo_status *ufifo_st = &sirfport->uart_reg->fifo_status;
 | 
						|
	unsigned int ch, rx_count = 0;
 | 
						|
	struct tty_struct *tty;
 | 
						|
	tty = tty_port_tty_get(&port->state->port);
 | 
						|
	if (!tty)
 | 
						|
		return -ENODEV;
 | 
						|
	while (!(rd_regl(port, ureg->sirfsoc_rx_fifo_status) &
 | 
						|
					ufifo_st->ff_empty(port->line))) {
 | 
						|
		ch = rd_regl(port, ureg->sirfsoc_rx_fifo_data) |
 | 
						|
			SIRFUART_DUMMY_READ;
 | 
						|
		if (unlikely(uart_handle_sysrq_char(port, ch)))
 | 
						|
			continue;
 | 
						|
		uart_insert_char(port, 0, 0, ch, TTY_NORMAL);
 | 
						|
		rx_count++;
 | 
						|
		if (rx_count >= max_rx_count)
 | 
						|
			break;
 | 
						|
	}
 | 
						|
 | 
						|
	sirfport->rx_io_count += rx_count;
 | 
						|
	port->icount.rx += rx_count;
 | 
						|
 | 
						|
	spin_unlock(&port->lock);
 | 
						|
	tty_flip_buffer_push(&port->state->port);
 | 
						|
	spin_lock(&port->lock);
 | 
						|
 | 
						|
	return rx_count;
 | 
						|
}
 | 
						|
 | 
						|
static unsigned int
 | 
						|
sirfsoc_uart_pio_tx_chars(struct sirfsoc_uart_port *sirfport, int count)
 | 
						|
{
 | 
						|
	struct uart_port *port = &sirfport->port;
 | 
						|
	struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
 | 
						|
	struct sirfsoc_fifo_status *ufifo_st = &sirfport->uart_reg->fifo_status;
 | 
						|
	struct circ_buf *xmit = &port->state->xmit;
 | 
						|
	unsigned int num_tx = 0;
 | 
						|
	while (!uart_circ_empty(xmit) &&
 | 
						|
		!(rd_regl(port, ureg->sirfsoc_tx_fifo_status) &
 | 
						|
					ufifo_st->ff_full(port->line)) &&
 | 
						|
		count--) {
 | 
						|
		wr_regl(port, ureg->sirfsoc_tx_fifo_data,
 | 
						|
				xmit->buf[xmit->tail]);
 | 
						|
		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
 | 
						|
		port->icount.tx++;
 | 
						|
		num_tx++;
 | 
						|
	}
 | 
						|
	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 | 
						|
		uart_write_wakeup(port);
 | 
						|
	return num_tx;
 | 
						|
}
 | 
						|
 | 
						|
static void sirfsoc_uart_tx_dma_complete_callback(void *param)
 | 
						|
{
 | 
						|
	struct sirfsoc_uart_port *sirfport = (struct sirfsoc_uart_port *)param;
 | 
						|
	struct uart_port *port = &sirfport->port;
 | 
						|
	struct circ_buf *xmit = &port->state->xmit;
 | 
						|
	unsigned long flags;
 | 
						|
 | 
						|
	xmit->tail = (xmit->tail + sirfport->transfer_size) &
 | 
						|
				(UART_XMIT_SIZE - 1);
 | 
						|
	port->icount.tx += sirfport->transfer_size;
 | 
						|
	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 | 
						|
		uart_write_wakeup(port);
 | 
						|
	if (sirfport->tx_dma_addr)
 | 
						|
		dma_unmap_single(port->dev, sirfport->tx_dma_addr,
 | 
						|
				sirfport->transfer_size, DMA_TO_DEVICE);
 | 
						|
	spin_lock_irqsave(&sirfport->tx_lock, flags);
 | 
						|
	sirfport->tx_dma_state = TX_DMA_IDLE;
 | 
						|
	sirfsoc_uart_tx_with_dma(sirfport);
 | 
						|
	spin_unlock_irqrestore(&sirfport->tx_lock, flags);
 | 
						|
}
 | 
						|
 | 
						|
static void sirfsoc_uart_insert_rx_buf_to_tty(
 | 
						|
		struct sirfsoc_uart_port *sirfport, int count)
 | 
						|
{
 | 
						|
	struct uart_port *port = &sirfport->port;
 | 
						|
	struct tty_port *tport = &port->state->port;
 | 
						|
	int inserted;
 | 
						|
 | 
						|
	inserted = tty_insert_flip_string(tport,
 | 
						|
		sirfport->rx_dma_items[sirfport->rx_completed].xmit.buf, count);
 | 
						|
	port->icount.rx += inserted;
 | 
						|
	tty_flip_buffer_push(tport);
 | 
						|
}
 | 
						|
 | 
						|
static void sirfsoc_rx_submit_one_dma_desc(struct uart_port *port, int index)
 | 
						|
{
 | 
						|
	struct sirfsoc_uart_port *sirfport = to_sirfport(port);
 | 
						|
 | 
						|
	sirfport->rx_dma_items[index].xmit.tail =
 | 
						|
		sirfport->rx_dma_items[index].xmit.head = 0;
 | 
						|
	sirfport->rx_dma_items[index].desc =
 | 
						|
		dmaengine_prep_slave_single(sirfport->rx_dma_chan,
 | 
						|
		sirfport->rx_dma_items[index].dma_addr, SIRFSOC_RX_DMA_BUF_SIZE,
 | 
						|
		DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT);
 | 
						|
	if (!sirfport->rx_dma_items[index].desc) {
 | 
						|
		dev_err(port->dev, "DMA slave single fail\n");
 | 
						|
		return;
 | 
						|
	}
 | 
						|
	sirfport->rx_dma_items[index].desc->callback =
 | 
						|
		sirfsoc_uart_rx_dma_complete_callback;
 | 
						|
	sirfport->rx_dma_items[index].desc->callback_param = sirfport;
 | 
						|
	sirfport->rx_dma_items[index].cookie =
 | 
						|
		dmaengine_submit(sirfport->rx_dma_items[index].desc);
 | 
						|
	dma_async_issue_pending(sirfport->rx_dma_chan);
 | 
						|
}
 | 
						|
 | 
						|
static void sirfsoc_rx_tmo_process_tl(unsigned long param)
 | 
						|
{
 | 
						|
	struct sirfsoc_uart_port *sirfport = (struct sirfsoc_uart_port *)param;
 | 
						|
	struct uart_port *port = &sirfport->port;
 | 
						|
	struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
 | 
						|
	struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
 | 
						|
	struct sirfsoc_int_status *uint_st = &sirfport->uart_reg->uart_int_st;
 | 
						|
	unsigned int count;
 | 
						|
	unsigned long flags;
 | 
						|
 | 
						|
	spin_lock_irqsave(&sirfport->rx_lock, flags);
 | 
						|
	while (sirfport->rx_completed != sirfport->rx_issued) {
 | 
						|
		sirfsoc_uart_insert_rx_buf_to_tty(sirfport,
 | 
						|
					SIRFSOC_RX_DMA_BUF_SIZE);
 | 
						|
		sirfport->rx_completed++;
 | 
						|
		sirfport->rx_completed %= SIRFSOC_RX_LOOP_BUF_CNT;
 | 
						|
	}
 | 
						|
	count = CIRC_CNT(sirfport->rx_dma_items[sirfport->rx_issued].xmit.head,
 | 
						|
		sirfport->rx_dma_items[sirfport->rx_issued].xmit.tail,
 | 
						|
		SIRFSOC_RX_DMA_BUF_SIZE);
 | 
						|
	if (count > 0)
 | 
						|
		sirfsoc_uart_insert_rx_buf_to_tty(sirfport, count);
 | 
						|
	wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
 | 
						|
			rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) |
 | 
						|
			SIRFUART_IO_MODE);
 | 
						|
	sirfsoc_uart_pio_rx_chars(port, 4 - sirfport->rx_io_count);
 | 
						|
	spin_unlock_irqrestore(&sirfport->rx_lock, flags);
 | 
						|
	if (sirfport->rx_io_count == 4) {
 | 
						|
		spin_lock_irqsave(&sirfport->rx_lock, flags);
 | 
						|
		sirfport->rx_io_count = 0;
 | 
						|
		wr_regl(port, ureg->sirfsoc_int_st_reg,
 | 
						|
				uint_st->sirfsoc_rx_done);
 | 
						|
		if (!sirfport->is_marco)
 | 
						|
			wr_regl(port, ureg->sirfsoc_int_en_reg,
 | 
						|
				rd_regl(port, ureg->sirfsoc_int_en_reg) &
 | 
						|
				~(uint_en->sirfsoc_rx_done_en));
 | 
						|
		else
 | 
						|
			wr_regl(port, SIRFUART_INT_EN_CLR,
 | 
						|
					uint_en->sirfsoc_rx_done_en);
 | 
						|
		spin_unlock_irqrestore(&sirfport->rx_lock, flags);
 | 
						|
 | 
						|
		sirfsoc_uart_start_next_rx_dma(port);
 | 
						|
	} else {
 | 
						|
		spin_lock_irqsave(&sirfport->rx_lock, flags);
 | 
						|
		wr_regl(port, ureg->sirfsoc_int_st_reg,
 | 
						|
				uint_st->sirfsoc_rx_done);
 | 
						|
		if (!sirfport->is_marco)
 | 
						|
			wr_regl(port, ureg->sirfsoc_int_en_reg,
 | 
						|
				rd_regl(port, ureg->sirfsoc_int_en_reg) |
 | 
						|
				(uint_en->sirfsoc_rx_done_en));
 | 
						|
		else
 | 
						|
			wr_regl(port, ureg->sirfsoc_int_en_reg,
 | 
						|
					uint_en->sirfsoc_rx_done_en);
 | 
						|
		spin_unlock_irqrestore(&sirfport->rx_lock, flags);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static void sirfsoc_uart_handle_rx_tmo(struct sirfsoc_uart_port *sirfport)
 | 
						|
{
 | 
						|
	struct uart_port *port = &sirfport->port;
 | 
						|
	struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
 | 
						|
	struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
 | 
						|
	struct dma_tx_state tx_state;
 | 
						|
	spin_lock(&sirfport->rx_lock);
 | 
						|
 | 
						|
	dmaengine_tx_status(sirfport->rx_dma_chan,
 | 
						|
		sirfport->rx_dma_items[sirfport->rx_issued].cookie, &tx_state);
 | 
						|
	dmaengine_terminate_all(sirfport->rx_dma_chan);
 | 
						|
	sirfport->rx_dma_items[sirfport->rx_issued].xmit.head =
 | 
						|
		SIRFSOC_RX_DMA_BUF_SIZE - tx_state.residue;
 | 
						|
	if (!sirfport->is_marco)
 | 
						|
		wr_regl(port, ureg->sirfsoc_int_en_reg,
 | 
						|
			rd_regl(port, ureg->sirfsoc_int_en_reg) &
 | 
						|
			~(uint_en->sirfsoc_rx_timeout_en));
 | 
						|
	else
 | 
						|
		wr_regl(port, SIRFUART_INT_EN_CLR,
 | 
						|
				uint_en->sirfsoc_rx_timeout_en);
 | 
						|
	spin_unlock(&sirfport->rx_lock);
 | 
						|
	tasklet_schedule(&sirfport->rx_tmo_process_tasklet);
 | 
						|
}
 | 
						|
 | 
						|
static void sirfsoc_uart_handle_rx_done(struct sirfsoc_uart_port *sirfport)
 | 
						|
{
 | 
						|
	struct uart_port *port = &sirfport->port;
 | 
						|
	struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
 | 
						|
	struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
 | 
						|
	struct sirfsoc_int_status *uint_st = &sirfport->uart_reg->uart_int_st;
 | 
						|
 | 
						|
	sirfsoc_uart_pio_rx_chars(port, 4 - sirfport->rx_io_count);
 | 
						|
	if (sirfport->rx_io_count == 4) {
 | 
						|
		sirfport->rx_io_count = 0;
 | 
						|
		if (!sirfport->is_marco)
 | 
						|
			wr_regl(port, ureg->sirfsoc_int_en_reg,
 | 
						|
				rd_regl(port, ureg->sirfsoc_int_en_reg) &
 | 
						|
				~(uint_en->sirfsoc_rx_done_en));
 | 
						|
		else
 | 
						|
			wr_regl(port, SIRFUART_INT_EN_CLR,
 | 
						|
					uint_en->sirfsoc_rx_done_en);
 | 
						|
		wr_regl(port, ureg->sirfsoc_int_st_reg,
 | 
						|
				uint_st->sirfsoc_rx_timeout);
 | 
						|
		sirfsoc_uart_start_next_rx_dma(port);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static irqreturn_t sirfsoc_uart_isr(int irq, void *dev_id)
 | 
						|
{
 | 
						|
	unsigned long intr_status;
 | 
						|
	unsigned long cts_status;
 | 
						|
	unsigned long flag = TTY_NORMAL;
 | 
						|
	struct sirfsoc_uart_port *sirfport = (struct sirfsoc_uart_port *)dev_id;
 | 
						|
	struct uart_port *port = &sirfport->port;
 | 
						|
	struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
 | 
						|
	struct sirfsoc_fifo_status *ufifo_st = &sirfport->uart_reg->fifo_status;
 | 
						|
	struct sirfsoc_int_status *uint_st = &sirfport->uart_reg->uart_int_st;
 | 
						|
	struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
 | 
						|
	struct uart_state *state = port->state;
 | 
						|
	struct circ_buf *xmit = &port->state->xmit;
 | 
						|
	spin_lock(&port->lock);
 | 
						|
	intr_status = rd_regl(port, ureg->sirfsoc_int_st_reg);
 | 
						|
	wr_regl(port, ureg->sirfsoc_int_st_reg, intr_status);
 | 
						|
	intr_status &= rd_regl(port, ureg->sirfsoc_int_en_reg);
 | 
						|
	if (unlikely(intr_status & (SIRFUART_ERR_INT_STAT(port, uint_st)))) {
 | 
						|
		if (intr_status & uint_st->sirfsoc_rxd_brk) {
 | 
						|
			port->icount.brk++;
 | 
						|
			if (uart_handle_break(port))
 | 
						|
				goto recv_char;
 | 
						|
		}
 | 
						|
		if (intr_status & uint_st->sirfsoc_rx_oflow)
 | 
						|
			port->icount.overrun++;
 | 
						|
		if (intr_status & uint_st->sirfsoc_frm_err) {
 | 
						|
			port->icount.frame++;
 | 
						|
			flag = TTY_FRAME;
 | 
						|
		}
 | 
						|
		if (intr_status & uint_st->sirfsoc_parity_err)
 | 
						|
			flag = TTY_PARITY;
 | 
						|
		wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_RESET);
 | 
						|
		wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0);
 | 
						|
		wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_START);
 | 
						|
		intr_status &= port->read_status_mask;
 | 
						|
		uart_insert_char(port, intr_status,
 | 
						|
					uint_en->sirfsoc_rx_oflow_en, 0, flag);
 | 
						|
		tty_flip_buffer_push(&state->port);
 | 
						|
	}
 | 
						|
recv_char:
 | 
						|
	if ((sirfport->uart_reg->uart_type == SIRF_REAL_UART) &&
 | 
						|
			(intr_status & SIRFUART_CTS_INT_ST(uint_st)) &&
 | 
						|
			!sirfport->tx_dma_state) {
 | 
						|
		cts_status = rd_regl(port, ureg->sirfsoc_afc_ctrl) &
 | 
						|
					SIRFUART_AFC_CTS_STATUS;
 | 
						|
		if (cts_status != 0)
 | 
						|
			cts_status = 0;
 | 
						|
		else
 | 
						|
			cts_status = 1;
 | 
						|
		uart_handle_cts_change(port, cts_status);
 | 
						|
		wake_up_interruptible(&state->port.delta_msr_wait);
 | 
						|
	}
 | 
						|
	if (IS_DMA_CHAN_VALID(sirfport->rx_dma_no)) {
 | 
						|
		if (intr_status & uint_st->sirfsoc_rx_timeout)
 | 
						|
			sirfsoc_uart_handle_rx_tmo(sirfport);
 | 
						|
		if (intr_status & uint_st->sirfsoc_rx_done)
 | 
						|
			sirfsoc_uart_handle_rx_done(sirfport);
 | 
						|
	} else {
 | 
						|
		if (intr_status & SIRFUART_RX_IO_INT_ST(uint_st))
 | 
						|
			sirfsoc_uart_pio_rx_chars(port,
 | 
						|
					SIRFSOC_UART_IO_RX_MAX_CNT);
 | 
						|
	}
 | 
						|
	if (intr_status & uint_st->sirfsoc_txfifo_empty) {
 | 
						|
		if (IS_DMA_CHAN_VALID(sirfport->tx_dma_no))
 | 
						|
			sirfsoc_uart_tx_with_dma(sirfport);
 | 
						|
		else {
 | 
						|
			if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
 | 
						|
				spin_unlock(&port->lock);
 | 
						|
				return IRQ_HANDLED;
 | 
						|
			} else {
 | 
						|
				sirfsoc_uart_pio_tx_chars(sirfport,
 | 
						|
					SIRFSOC_UART_IO_TX_REASONABLE_CNT);
 | 
						|
				if ((uart_circ_empty(xmit)) &&
 | 
						|
				(rd_regl(port, ureg->sirfsoc_tx_fifo_status) &
 | 
						|
				ufifo_st->ff_empty(port->line)))
 | 
						|
					sirfsoc_uart_stop_tx(port);
 | 
						|
			}
 | 
						|
		}
 | 
						|
	}
 | 
						|
	spin_unlock(&port->lock);
 | 
						|
	return IRQ_HANDLED;
 | 
						|
}
 | 
						|
 | 
						|
static void sirfsoc_uart_rx_dma_complete_tl(unsigned long param)
 | 
						|
{
 | 
						|
	struct sirfsoc_uart_port *sirfport = (struct sirfsoc_uart_port *)param;
 | 
						|
	struct uart_port *port = &sirfport->port;
 | 
						|
	struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
 | 
						|
	struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
 | 
						|
	unsigned long flags;
 | 
						|
	spin_lock_irqsave(&sirfport->rx_lock, flags);
 | 
						|
	while (sirfport->rx_completed != sirfport->rx_issued) {
 | 
						|
		sirfsoc_uart_insert_rx_buf_to_tty(sirfport,
 | 
						|
					SIRFSOC_RX_DMA_BUF_SIZE);
 | 
						|
		if (rd_regl(port, ureg->sirfsoc_int_en_reg) &
 | 
						|
				uint_en->sirfsoc_rx_timeout_en)
 | 
						|
			sirfsoc_rx_submit_one_dma_desc(port,
 | 
						|
					sirfport->rx_completed++);
 | 
						|
		else
 | 
						|
			sirfport->rx_completed++;
 | 
						|
		sirfport->rx_completed %= SIRFSOC_RX_LOOP_BUF_CNT;
 | 
						|
	}
 | 
						|
	spin_unlock_irqrestore(&sirfport->rx_lock, flags);
 | 
						|
}
 | 
						|
 | 
						|
static void sirfsoc_uart_rx_dma_complete_callback(void *param)
 | 
						|
{
 | 
						|
	struct sirfsoc_uart_port *sirfport = (struct sirfsoc_uart_port *)param;
 | 
						|
	spin_lock(&sirfport->rx_lock);
 | 
						|
	sirfport->rx_issued++;
 | 
						|
	sirfport->rx_issued %= SIRFSOC_RX_LOOP_BUF_CNT;
 | 
						|
	spin_unlock(&sirfport->rx_lock);
 | 
						|
	tasklet_schedule(&sirfport->rx_dma_complete_tasklet);
 | 
						|
}
 | 
						|
 | 
						|
/* submit rx dma task into dmaengine */
 | 
						|
static void sirfsoc_uart_start_next_rx_dma(struct uart_port *port)
 | 
						|
{
 | 
						|
	struct sirfsoc_uart_port *sirfport = to_sirfport(port);
 | 
						|
	struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
 | 
						|
	struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
 | 
						|
	unsigned long flags;
 | 
						|
	int i;
 | 
						|
	spin_lock_irqsave(&sirfport->rx_lock, flags);
 | 
						|
	sirfport->rx_io_count = 0;
 | 
						|
	wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
 | 
						|
		rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) &
 | 
						|
		~SIRFUART_IO_MODE);
 | 
						|
	spin_unlock_irqrestore(&sirfport->rx_lock, flags);
 | 
						|
	for (i = 0; i < SIRFSOC_RX_LOOP_BUF_CNT; i++)
 | 
						|
		sirfsoc_rx_submit_one_dma_desc(port, i);
 | 
						|
	sirfport->rx_completed = sirfport->rx_issued = 0;
 | 
						|
	spin_lock_irqsave(&sirfport->rx_lock, flags);
 | 
						|
	if (!sirfport->is_marco)
 | 
						|
		wr_regl(port, ureg->sirfsoc_int_en_reg,
 | 
						|
				rd_regl(port, ureg->sirfsoc_int_en_reg) |
 | 
						|
				SIRFUART_RX_DMA_INT_EN(port, uint_en));
 | 
						|
	else
 | 
						|
		wr_regl(port, ureg->sirfsoc_int_en_reg,
 | 
						|
			SIRFUART_RX_DMA_INT_EN(port, uint_en));
 | 
						|
	spin_unlock_irqrestore(&sirfport->rx_lock, flags);
 | 
						|
}
 | 
						|
 | 
						|
static void sirfsoc_uart_start_rx(struct uart_port *port)
 | 
						|
{
 | 
						|
	struct sirfsoc_uart_port *sirfport = to_sirfport(port);
 | 
						|
	struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
 | 
						|
	struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
 | 
						|
 | 
						|
	sirfport->rx_io_count = 0;
 | 
						|
	wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_RESET);
 | 
						|
	wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0);
 | 
						|
	wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_START);
 | 
						|
	if (IS_DMA_CHAN_VALID(sirfport->rx_dma_no))
 | 
						|
		sirfsoc_uart_start_next_rx_dma(port);
 | 
						|
	else {
 | 
						|
		if (!sirfport->is_marco)
 | 
						|
			wr_regl(port, ureg->sirfsoc_int_en_reg,
 | 
						|
				rd_regl(port, ureg->sirfsoc_int_en_reg) |
 | 
						|
				SIRFUART_RX_IO_INT_EN(port, uint_en));
 | 
						|
		else
 | 
						|
			wr_regl(port, ureg->sirfsoc_int_en_reg,
 | 
						|
				SIRFUART_RX_IO_INT_EN(port, uint_en));
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static unsigned int
 | 
						|
sirfsoc_usp_calc_sample_div(unsigned long set_rate,
 | 
						|
		unsigned long ioclk_rate, unsigned long *sample_reg)
 | 
						|
{
 | 
						|
	unsigned long min_delta = ~0UL;
 | 
						|
	unsigned short sample_div;
 | 
						|
	unsigned long ioclk_div = 0;
 | 
						|
	unsigned long temp_delta;
 | 
						|
 | 
						|
	for (sample_div = SIRF_MIN_SAMPLE_DIV;
 | 
						|
			sample_div <= SIRF_MAX_SAMPLE_DIV; sample_div++) {
 | 
						|
		temp_delta = ioclk_rate -
 | 
						|
		(ioclk_rate + (set_rate * sample_div) / 2)
 | 
						|
		/ (set_rate * sample_div) * set_rate * sample_div;
 | 
						|
 | 
						|
		temp_delta = (temp_delta > 0) ? temp_delta : -temp_delta;
 | 
						|
		if (temp_delta < min_delta) {
 | 
						|
			ioclk_div = (2 * ioclk_rate /
 | 
						|
				(set_rate * sample_div) + 1) / 2 - 1;
 | 
						|
			if (ioclk_div > SIRF_IOCLK_DIV_MAX)
 | 
						|
				continue;
 | 
						|
			min_delta = temp_delta;
 | 
						|
			*sample_reg = sample_div;
 | 
						|
			if (!temp_delta)
 | 
						|
				break;
 | 
						|
		}
 | 
						|
	}
 | 
						|
	return ioclk_div;
 | 
						|
}
 | 
						|
 | 
						|
static unsigned int
 | 
						|
sirfsoc_uart_calc_sample_div(unsigned long baud_rate,
 | 
						|
			unsigned long ioclk_rate, unsigned long *set_baud)
 | 
						|
{
 | 
						|
	unsigned long min_delta = ~0UL;
 | 
						|
	unsigned short sample_div;
 | 
						|
	unsigned int regv = 0;
 | 
						|
	unsigned long ioclk_div;
 | 
						|
	unsigned long baud_tmp;
 | 
						|
	int temp_delta;
 | 
						|
 | 
						|
	for (sample_div = SIRF_MIN_SAMPLE_DIV;
 | 
						|
			sample_div <= SIRF_MAX_SAMPLE_DIV; sample_div++) {
 | 
						|
		ioclk_div = (ioclk_rate / (baud_rate * (sample_div + 1))) - 1;
 | 
						|
		if (ioclk_div > SIRF_IOCLK_DIV_MAX)
 | 
						|
			continue;
 | 
						|
		baud_tmp = ioclk_rate / ((ioclk_div + 1) * (sample_div + 1));
 | 
						|
		temp_delta = baud_tmp - baud_rate;
 | 
						|
		temp_delta = (temp_delta > 0) ? temp_delta : -temp_delta;
 | 
						|
		if (temp_delta < min_delta) {
 | 
						|
			regv = regv & (~SIRF_IOCLK_DIV_MASK);
 | 
						|
			regv = regv | ioclk_div;
 | 
						|
			regv = regv & (~SIRF_SAMPLE_DIV_MASK);
 | 
						|
			regv = regv | (sample_div << SIRF_SAMPLE_DIV_SHIFT);
 | 
						|
			min_delta = temp_delta;
 | 
						|
			*set_baud = baud_tmp;
 | 
						|
		}
 | 
						|
	}
 | 
						|
	return regv;
 | 
						|
}
 | 
						|
 | 
						|
static void sirfsoc_uart_set_termios(struct uart_port *port,
 | 
						|
				       struct ktermios *termios,
 | 
						|
				       struct ktermios *old)
 | 
						|
{
 | 
						|
	struct sirfsoc_uart_port *sirfport = to_sirfport(port);
 | 
						|
	struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
 | 
						|
	struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
 | 
						|
	unsigned long	config_reg = 0;
 | 
						|
	unsigned long	baud_rate;
 | 
						|
	unsigned long	set_baud;
 | 
						|
	unsigned long	flags;
 | 
						|
	unsigned long	ic;
 | 
						|
	unsigned int	clk_div_reg = 0;
 | 
						|
	unsigned long	txfifo_op_reg, ioclk_rate;
 | 
						|
	unsigned long	rx_time_out;
 | 
						|
	int		threshold_div;
 | 
						|
	u32		data_bit_len, stop_bit_len, len_val;
 | 
						|
	unsigned long	sample_div_reg = 0xf;
 | 
						|
	ioclk_rate	= port->uartclk;
 | 
						|
 | 
						|
	switch (termios->c_cflag & CSIZE) {
 | 
						|
	default:
 | 
						|
	case CS8:
 | 
						|
		data_bit_len = 8;
 | 
						|
		config_reg |= SIRFUART_DATA_BIT_LEN_8;
 | 
						|
		break;
 | 
						|
	case CS7:
 | 
						|
		data_bit_len = 7;
 | 
						|
		config_reg |= SIRFUART_DATA_BIT_LEN_7;
 | 
						|
		break;
 | 
						|
	case CS6:
 | 
						|
		data_bit_len = 6;
 | 
						|
		config_reg |= SIRFUART_DATA_BIT_LEN_6;
 | 
						|
		break;
 | 
						|
	case CS5:
 | 
						|
		data_bit_len = 5;
 | 
						|
		config_reg |= SIRFUART_DATA_BIT_LEN_5;
 | 
						|
		break;
 | 
						|
	}
 | 
						|
	if (termios->c_cflag & CSTOPB) {
 | 
						|
		config_reg |= SIRFUART_STOP_BIT_LEN_2;
 | 
						|
		stop_bit_len = 2;
 | 
						|
	} else
 | 
						|
		stop_bit_len = 1;
 | 
						|
 | 
						|
	spin_lock_irqsave(&port->lock, flags);
 | 
						|
	port->read_status_mask = uint_en->sirfsoc_rx_oflow_en;
 | 
						|
	port->ignore_status_mask = 0;
 | 
						|
	if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) {
 | 
						|
		if (termios->c_iflag & INPCK)
 | 
						|
			port->read_status_mask |= uint_en->sirfsoc_frm_err_en |
 | 
						|
				uint_en->sirfsoc_parity_err_en;
 | 
						|
	} else {
 | 
						|
		if (termios->c_iflag & INPCK)
 | 
						|
			port->read_status_mask |= uint_en->sirfsoc_frm_err_en;
 | 
						|
	}
 | 
						|
	if (termios->c_iflag & (BRKINT | PARMRK))
 | 
						|
			port->read_status_mask |= uint_en->sirfsoc_rxd_brk_en;
 | 
						|
	if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) {
 | 
						|
		if (termios->c_iflag & IGNPAR)
 | 
						|
			port->ignore_status_mask |=
 | 
						|
				uint_en->sirfsoc_frm_err_en |
 | 
						|
				uint_en->sirfsoc_parity_err_en;
 | 
						|
		if (termios->c_cflag & PARENB) {
 | 
						|
			if (termios->c_cflag & CMSPAR) {
 | 
						|
				if (termios->c_cflag & PARODD)
 | 
						|
					config_reg |= SIRFUART_STICK_BIT_MARK;
 | 
						|
				else
 | 
						|
					config_reg |= SIRFUART_STICK_BIT_SPACE;
 | 
						|
			} else if (termios->c_cflag & PARODD) {
 | 
						|
				config_reg |= SIRFUART_STICK_BIT_ODD;
 | 
						|
			} else {
 | 
						|
				config_reg |= SIRFUART_STICK_BIT_EVEN;
 | 
						|
			}
 | 
						|
		}
 | 
						|
	} else {
 | 
						|
		if (termios->c_iflag & IGNPAR)
 | 
						|
			port->ignore_status_mask |=
 | 
						|
				uint_en->sirfsoc_frm_err_en;
 | 
						|
		if (termios->c_cflag & PARENB)
 | 
						|
			dev_warn(port->dev,
 | 
						|
					"USP-UART not support parity err\n");
 | 
						|
	}
 | 
						|
	if (termios->c_iflag & IGNBRK) {
 | 
						|
		port->ignore_status_mask |=
 | 
						|
			uint_en->sirfsoc_rxd_brk_en;
 | 
						|
		if (termios->c_iflag & IGNPAR)
 | 
						|
			port->ignore_status_mask |=
 | 
						|
				uint_en->sirfsoc_rx_oflow_en;
 | 
						|
	}
 | 
						|
	if ((termios->c_cflag & CREAD) == 0)
 | 
						|
		port->ignore_status_mask |= SIRFUART_DUMMY_READ;
 | 
						|
	/* Hardware Flow Control Settings */
 | 
						|
	if (UART_ENABLE_MS(port, termios->c_cflag)) {
 | 
						|
		if (!sirfport->ms_enabled)
 | 
						|
			sirfsoc_uart_enable_ms(port);
 | 
						|
	} else {
 | 
						|
		if (sirfport->ms_enabled)
 | 
						|
			sirfsoc_uart_disable_ms(port);
 | 
						|
	}
 | 
						|
	baud_rate = uart_get_baud_rate(port, termios, old, 0, 4000000);
 | 
						|
	if (ioclk_rate == 150000000) {
 | 
						|
		for (ic = 0; ic < SIRF_BAUD_RATE_SUPPORT_NR; ic++)
 | 
						|
			if (baud_rate == baudrate_to_regv[ic].baud_rate)
 | 
						|
				clk_div_reg = baudrate_to_regv[ic].reg_val;
 | 
						|
	}
 | 
						|
	set_baud = baud_rate;
 | 
						|
	if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) {
 | 
						|
		if (unlikely(clk_div_reg == 0))
 | 
						|
			clk_div_reg = sirfsoc_uart_calc_sample_div(baud_rate,
 | 
						|
					ioclk_rate, &set_baud);
 | 
						|
		wr_regl(port, ureg->sirfsoc_divisor, clk_div_reg);
 | 
						|
	} else {
 | 
						|
		clk_div_reg = sirfsoc_usp_calc_sample_div(baud_rate,
 | 
						|
				ioclk_rate, &sample_div_reg);
 | 
						|
		sample_div_reg--;
 | 
						|
		set_baud = ((ioclk_rate / (clk_div_reg+1) - 1) /
 | 
						|
				(sample_div_reg + 1));
 | 
						|
		/* setting usp mode 2 */
 | 
						|
		len_val = ((1 << SIRFSOC_USP_MODE2_RXD_DELAY_OFFSET) |
 | 
						|
				(1 << SIRFSOC_USP_MODE2_TXD_DELAY_OFFSET));
 | 
						|
		len_val |= ((clk_div_reg & SIRFSOC_USP_MODE2_CLK_DIVISOR_MASK)
 | 
						|
				<< SIRFSOC_USP_MODE2_CLK_DIVISOR_OFFSET);
 | 
						|
		wr_regl(port, ureg->sirfsoc_mode2, len_val);
 | 
						|
	}
 | 
						|
	if (tty_termios_baud_rate(termios))
 | 
						|
		tty_termios_encode_baud_rate(termios, set_baud, set_baud);
 | 
						|
	/* set receive timeout && data bits len */
 | 
						|
	rx_time_out = SIRFSOC_UART_RX_TIMEOUT(set_baud, 20000);
 | 
						|
	rx_time_out = SIRFUART_RECV_TIMEOUT_VALUE(rx_time_out);
 | 
						|
	txfifo_op_reg = rd_regl(port, ureg->sirfsoc_tx_fifo_op);
 | 
						|
	wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_STOP);
 | 
						|
	wr_regl(port, ureg->sirfsoc_tx_fifo_op,
 | 
						|
			(txfifo_op_reg & ~SIRFUART_FIFO_START));
 | 
						|
	if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) {
 | 
						|
		config_reg |= SIRFUART_RECV_TIMEOUT(port, rx_time_out);
 | 
						|
		wr_regl(port, ureg->sirfsoc_line_ctrl, config_reg);
 | 
						|
	} else {
 | 
						|
		/*tx frame ctrl*/
 | 
						|
		len_val = (data_bit_len - 1) << SIRFSOC_USP_TX_DATA_LEN_OFFSET;
 | 
						|
		len_val |= (data_bit_len + 1 + stop_bit_len - 1) <<
 | 
						|
				SIRFSOC_USP_TX_FRAME_LEN_OFFSET;
 | 
						|
		len_val |= ((data_bit_len - 1) <<
 | 
						|
				SIRFSOC_USP_TX_SHIFTER_LEN_OFFSET);
 | 
						|
		len_val |= (((clk_div_reg & 0xc00) >> 10) <<
 | 
						|
				SIRFSOC_USP_TX_CLK_DIVISOR_OFFSET);
 | 
						|
		wr_regl(port, ureg->sirfsoc_tx_frame_ctrl, len_val);
 | 
						|
		/*rx frame ctrl*/
 | 
						|
		len_val = (data_bit_len - 1) << SIRFSOC_USP_RX_DATA_LEN_OFFSET;
 | 
						|
		len_val |= (data_bit_len + 1 + stop_bit_len - 1) <<
 | 
						|
				SIRFSOC_USP_RX_FRAME_LEN_OFFSET;
 | 
						|
		len_val |= (data_bit_len - 1) <<
 | 
						|
				SIRFSOC_USP_RX_SHIFTER_LEN_OFFSET;
 | 
						|
		len_val |= (((clk_div_reg & 0xf000) >> 12) <<
 | 
						|
				SIRFSOC_USP_RX_CLK_DIVISOR_OFFSET);
 | 
						|
		wr_regl(port, ureg->sirfsoc_rx_frame_ctrl, len_val);
 | 
						|
		/*async param*/
 | 
						|
		wr_regl(port, ureg->sirfsoc_async_param_reg,
 | 
						|
			(SIRFUART_RECV_TIMEOUT(port, rx_time_out)) |
 | 
						|
			(sample_div_reg & SIRFSOC_USP_ASYNC_DIV2_MASK) <<
 | 
						|
			SIRFSOC_USP_ASYNC_DIV2_OFFSET);
 | 
						|
	}
 | 
						|
	if (IS_DMA_CHAN_VALID(sirfport->tx_dma_no))
 | 
						|
		wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl, SIRFUART_DMA_MODE);
 | 
						|
	else
 | 
						|
		wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl, SIRFUART_IO_MODE);
 | 
						|
	if (IS_DMA_CHAN_VALID(sirfport->rx_dma_no))
 | 
						|
		wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, SIRFUART_DMA_MODE);
 | 
						|
	else
 | 
						|
		wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, SIRFUART_IO_MODE);
 | 
						|
	/* Reset Rx/Tx FIFO Threshold level for proper baudrate */
 | 
						|
	if (set_baud < 1000000)
 | 
						|
		threshold_div = 1;
 | 
						|
	else
 | 
						|
		threshold_div = 2;
 | 
						|
	wr_regl(port, ureg->sirfsoc_tx_fifo_ctrl,
 | 
						|
				SIRFUART_FIFO_THD(port) / threshold_div);
 | 
						|
	wr_regl(port, ureg->sirfsoc_rx_fifo_ctrl,
 | 
						|
				SIRFUART_FIFO_THD(port) / threshold_div);
 | 
						|
	txfifo_op_reg |= SIRFUART_FIFO_START;
 | 
						|
	wr_regl(port, ureg->sirfsoc_tx_fifo_op, txfifo_op_reg);
 | 
						|
	uart_update_timeout(port, termios->c_cflag, set_baud);
 | 
						|
	sirfsoc_uart_start_rx(port);
 | 
						|
	wr_regl(port, ureg->sirfsoc_tx_rx_en, SIRFUART_TX_EN | SIRFUART_RX_EN);
 | 
						|
	spin_unlock_irqrestore(&port->lock, flags);
 | 
						|
}
 | 
						|
 | 
						|
static unsigned int sirfsoc_uart_init_tx_dma(struct uart_port *port)
 | 
						|
{
 | 
						|
	struct sirfsoc_uart_port *sirfport = to_sirfport(port);
 | 
						|
	dma_cap_mask_t dma_mask;
 | 
						|
	struct dma_slave_config tx_slv_cfg = {
 | 
						|
		.dst_maxburst = 2,
 | 
						|
	};
 | 
						|
 | 
						|
	dma_cap_zero(dma_mask);
 | 
						|
	dma_cap_set(DMA_SLAVE, dma_mask);
 | 
						|
	sirfport->tx_dma_chan = dma_request_channel(dma_mask,
 | 
						|
		(dma_filter_fn)sirfsoc_dma_filter_id,
 | 
						|
		(void *)sirfport->tx_dma_no);
 | 
						|
	if (!sirfport->tx_dma_chan) {
 | 
						|
		dev_err(port->dev, "Uart Request Dma Channel Fail %d\n",
 | 
						|
					sirfport->tx_dma_no);
 | 
						|
		return  -EPROBE_DEFER;
 | 
						|
	}
 | 
						|
	dmaengine_slave_config(sirfport->tx_dma_chan, &tx_slv_cfg);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static unsigned int sirfsoc_uart_init_rx_dma(struct uart_port *port)
 | 
						|
{
 | 
						|
	struct sirfsoc_uart_port *sirfport = to_sirfport(port);
 | 
						|
	dma_cap_mask_t dma_mask;
 | 
						|
	int ret;
 | 
						|
	int i, j;
 | 
						|
	struct dma_slave_config slv_cfg = {
 | 
						|
		.src_maxburst = 2,
 | 
						|
	};
 | 
						|
 | 
						|
	dma_cap_zero(dma_mask);
 | 
						|
	dma_cap_set(DMA_SLAVE, dma_mask);
 | 
						|
	sirfport->rx_dma_chan = dma_request_channel(dma_mask,
 | 
						|
					(dma_filter_fn)sirfsoc_dma_filter_id,
 | 
						|
					(void *)sirfport->rx_dma_no);
 | 
						|
	if (!sirfport->rx_dma_chan) {
 | 
						|
		dev_err(port->dev, "Uart Request Dma Channel Fail %d\n",
 | 
						|
				sirfport->rx_dma_no);
 | 
						|
		ret = -EPROBE_DEFER;
 | 
						|
		goto request_err;
 | 
						|
	}
 | 
						|
	for (i = 0; i < SIRFSOC_RX_LOOP_BUF_CNT; i++) {
 | 
						|
		sirfport->rx_dma_items[i].xmit.buf =
 | 
						|
			dma_alloc_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE,
 | 
						|
			&sirfport->rx_dma_items[i].dma_addr, GFP_KERNEL);
 | 
						|
		if (!sirfport->rx_dma_items[i].xmit.buf) {
 | 
						|
			dev_err(port->dev, "Uart alloc bufa failed\n");
 | 
						|
			ret = -ENOMEM;
 | 
						|
			goto alloc_coherent_err;
 | 
						|
		}
 | 
						|
		sirfport->rx_dma_items[i].xmit.head =
 | 
						|
			sirfport->rx_dma_items[i].xmit.tail = 0;
 | 
						|
	}
 | 
						|
	dmaengine_slave_config(sirfport->rx_dma_chan, &slv_cfg);
 | 
						|
 | 
						|
	return 0;
 | 
						|
alloc_coherent_err:
 | 
						|
	for (j = 0; j < i; j++)
 | 
						|
		dma_free_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE,
 | 
						|
				sirfport->rx_dma_items[j].xmit.buf,
 | 
						|
				sirfport->rx_dma_items[j].dma_addr);
 | 
						|
	dma_release_channel(sirfport->rx_dma_chan);
 | 
						|
request_err:
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static void sirfsoc_uart_uninit_tx_dma(struct sirfsoc_uart_port *sirfport)
 | 
						|
{
 | 
						|
	dmaengine_terminate_all(sirfport->tx_dma_chan);
 | 
						|
	dma_release_channel(sirfport->tx_dma_chan);
 | 
						|
}
 | 
						|
 | 
						|
static void sirfsoc_uart_uninit_rx_dma(struct sirfsoc_uart_port *sirfport)
 | 
						|
{
 | 
						|
	int i;
 | 
						|
	struct uart_port *port = &sirfport->port;
 | 
						|
	dmaengine_terminate_all(sirfport->rx_dma_chan);
 | 
						|
	dma_release_channel(sirfport->rx_dma_chan);
 | 
						|
	for (i = 0; i < SIRFSOC_RX_LOOP_BUF_CNT; i++)
 | 
						|
		dma_free_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE,
 | 
						|
				sirfport->rx_dma_items[i].xmit.buf,
 | 
						|
				sirfport->rx_dma_items[i].dma_addr);
 | 
						|
}
 | 
						|
 | 
						|
static int sirfsoc_uart_startup(struct uart_port *port)
 | 
						|
{
 | 
						|
	struct sirfsoc_uart_port *sirfport	= to_sirfport(port);
 | 
						|
	struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
 | 
						|
	unsigned int index			= port->line;
 | 
						|
	int ret;
 | 
						|
	set_irq_flags(port->irq, IRQF_VALID | IRQF_NOAUTOEN);
 | 
						|
	ret = request_irq(port->irq,
 | 
						|
				sirfsoc_uart_isr,
 | 
						|
				0,
 | 
						|
				SIRFUART_PORT_NAME,
 | 
						|
				sirfport);
 | 
						|
	if (ret != 0) {
 | 
						|
		dev_err(port->dev, "UART%d request IRQ line (%d) failed.\n",
 | 
						|
							index, port->irq);
 | 
						|
		goto irq_err;
 | 
						|
	}
 | 
						|
 | 
						|
	/* initial hardware settings */
 | 
						|
	wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl,
 | 
						|
		rd_regl(port, ureg->sirfsoc_tx_dma_io_ctrl) |
 | 
						|
		SIRFUART_IO_MODE);
 | 
						|
	wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
 | 
						|
		rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) |
 | 
						|
		SIRFUART_IO_MODE);
 | 
						|
	wr_regl(port, ureg->sirfsoc_tx_dma_io_len, 0);
 | 
						|
	wr_regl(port, ureg->sirfsoc_rx_dma_io_len, 0);
 | 
						|
	wr_regl(port, ureg->sirfsoc_tx_rx_en, SIRFUART_RX_EN | SIRFUART_TX_EN);
 | 
						|
	if (sirfport->uart_reg->uart_type == SIRF_USP_UART)
 | 
						|
		wr_regl(port, ureg->sirfsoc_mode1,
 | 
						|
			SIRFSOC_USP_ENDIAN_CTRL_LSBF |
 | 
						|
			SIRFSOC_USP_EN);
 | 
						|
	wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_RESET);
 | 
						|
	wr_regl(port, ureg->sirfsoc_tx_fifo_op, 0);
 | 
						|
	wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_RESET);
 | 
						|
	wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0);
 | 
						|
	wr_regl(port, ureg->sirfsoc_tx_fifo_ctrl, SIRFUART_FIFO_THD(port));
 | 
						|
	wr_regl(port, ureg->sirfsoc_rx_fifo_ctrl, SIRFUART_FIFO_THD(port));
 | 
						|
 | 
						|
	if (IS_DMA_CHAN_VALID(sirfport->rx_dma_no)) {
 | 
						|
		ret = sirfsoc_uart_init_rx_dma(port);
 | 
						|
		if (ret)
 | 
						|
			goto init_rx_err;
 | 
						|
		wr_regl(port, ureg->sirfsoc_rx_fifo_level_chk,
 | 
						|
				SIRFUART_RX_FIFO_CHK_SC(port->line, 0x4) |
 | 
						|
				SIRFUART_RX_FIFO_CHK_LC(port->line, 0xe) |
 | 
						|
				SIRFUART_RX_FIFO_CHK_HC(port->line, 0x1b));
 | 
						|
	}
 | 
						|
	if (IS_DMA_CHAN_VALID(sirfport->tx_dma_no)) {
 | 
						|
		sirfsoc_uart_init_tx_dma(port);
 | 
						|
		sirfport->tx_dma_state = TX_DMA_IDLE;
 | 
						|
		wr_regl(port, ureg->sirfsoc_tx_fifo_level_chk,
 | 
						|
				SIRFUART_TX_FIFO_CHK_SC(port->line, 0x1b) |
 | 
						|
				SIRFUART_TX_FIFO_CHK_LC(port->line, 0xe) |
 | 
						|
				SIRFUART_TX_FIFO_CHK_HC(port->line, 0x4));
 | 
						|
	}
 | 
						|
	sirfport->ms_enabled = false;
 | 
						|
	if (sirfport->uart_reg->uart_type == SIRF_USP_UART &&
 | 
						|
		sirfport->hw_flow_ctrl) {
 | 
						|
		set_irq_flags(gpio_to_irq(sirfport->cts_gpio),
 | 
						|
			IRQF_VALID | IRQF_NOAUTOEN);
 | 
						|
		ret = request_irq(gpio_to_irq(sirfport->cts_gpio),
 | 
						|
			sirfsoc_uart_usp_cts_handler, IRQF_TRIGGER_FALLING |
 | 
						|
			IRQF_TRIGGER_RISING, "usp_cts_irq", sirfport);
 | 
						|
		if (ret != 0) {
 | 
						|
			dev_err(port->dev, "UART-USP:request gpio irq fail\n");
 | 
						|
			goto init_rx_err;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	enable_irq(port->irq);
 | 
						|
 | 
						|
	return 0;
 | 
						|
init_rx_err:
 | 
						|
	free_irq(port->irq, sirfport);
 | 
						|
irq_err:
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static void sirfsoc_uart_shutdown(struct uart_port *port)
 | 
						|
{
 | 
						|
	struct sirfsoc_uart_port *sirfport = to_sirfport(port);
 | 
						|
	struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
 | 
						|
	if (!sirfport->is_marco)
 | 
						|
		wr_regl(port, ureg->sirfsoc_int_en_reg, 0);
 | 
						|
	else
 | 
						|
		wr_regl(port, SIRFUART_INT_EN_CLR, ~0UL);
 | 
						|
 | 
						|
	free_irq(port->irq, sirfport);
 | 
						|
	if (sirfport->ms_enabled)
 | 
						|
		sirfsoc_uart_disable_ms(port);
 | 
						|
	if (sirfport->uart_reg->uart_type == SIRF_USP_UART &&
 | 
						|
			sirfport->hw_flow_ctrl) {
 | 
						|
		gpio_set_value(sirfport->rts_gpio, 1);
 | 
						|
		free_irq(gpio_to_irq(sirfport->cts_gpio), sirfport);
 | 
						|
	}
 | 
						|
	if (IS_DMA_CHAN_VALID(sirfport->rx_dma_no))
 | 
						|
		sirfsoc_uart_uninit_rx_dma(sirfport);
 | 
						|
	if (IS_DMA_CHAN_VALID(sirfport->tx_dma_no)) {
 | 
						|
		sirfsoc_uart_uninit_tx_dma(sirfport);
 | 
						|
		sirfport->tx_dma_state = TX_DMA_IDLE;
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static const char *sirfsoc_uart_type(struct uart_port *port)
 | 
						|
{
 | 
						|
	return port->type == SIRFSOC_PORT_TYPE ? SIRFUART_PORT_NAME : NULL;
 | 
						|
}
 | 
						|
 | 
						|
static int sirfsoc_uart_request_port(struct uart_port *port)
 | 
						|
{
 | 
						|
	struct sirfsoc_uart_port *sirfport = to_sirfport(port);
 | 
						|
	struct sirfsoc_uart_param *uart_param = &sirfport->uart_reg->uart_param;
 | 
						|
	void *ret;
 | 
						|
	ret = request_mem_region(port->mapbase,
 | 
						|
		SIRFUART_MAP_SIZE, uart_param->port_name);
 | 
						|
	return ret ? 0 : -EBUSY;
 | 
						|
}
 | 
						|
 | 
						|
static void sirfsoc_uart_release_port(struct uart_port *port)
 | 
						|
{
 | 
						|
	release_mem_region(port->mapbase, SIRFUART_MAP_SIZE);
 | 
						|
}
 | 
						|
 | 
						|
static void sirfsoc_uart_config_port(struct uart_port *port, int flags)
 | 
						|
{
 | 
						|
	if (flags & UART_CONFIG_TYPE) {
 | 
						|
		port->type = SIRFSOC_PORT_TYPE;
 | 
						|
		sirfsoc_uart_request_port(port);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static struct uart_ops sirfsoc_uart_ops = {
 | 
						|
	.tx_empty	= sirfsoc_uart_tx_empty,
 | 
						|
	.get_mctrl	= sirfsoc_uart_get_mctrl,
 | 
						|
	.set_mctrl	= sirfsoc_uart_set_mctrl,
 | 
						|
	.stop_tx	= sirfsoc_uart_stop_tx,
 | 
						|
	.start_tx	= sirfsoc_uart_start_tx,
 | 
						|
	.stop_rx	= sirfsoc_uart_stop_rx,
 | 
						|
	.enable_ms	= sirfsoc_uart_enable_ms,
 | 
						|
	.break_ctl	= sirfsoc_uart_break_ctl,
 | 
						|
	.startup	= sirfsoc_uart_startup,
 | 
						|
	.shutdown	= sirfsoc_uart_shutdown,
 | 
						|
	.set_termios	= sirfsoc_uart_set_termios,
 | 
						|
	.type		= sirfsoc_uart_type,
 | 
						|
	.release_port	= sirfsoc_uart_release_port,
 | 
						|
	.request_port	= sirfsoc_uart_request_port,
 | 
						|
	.config_port	= sirfsoc_uart_config_port,
 | 
						|
};
 | 
						|
 | 
						|
#ifdef CONFIG_SERIAL_SIRFSOC_CONSOLE
 | 
						|
static int __init
 | 
						|
sirfsoc_uart_console_setup(struct console *co, char *options)
 | 
						|
{
 | 
						|
	unsigned int baud = 115200;
 | 
						|
	unsigned int bits = 8;
 | 
						|
	unsigned int parity = 'n';
 | 
						|
	unsigned int flow = 'n';
 | 
						|
	struct uart_port *port = &sirfsoc_uart_ports[co->index].port;
 | 
						|
	struct sirfsoc_uart_port *sirfport = to_sirfport(port);
 | 
						|
	struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
 | 
						|
	if (co->index < 0 || co->index >= SIRFSOC_UART_NR)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	if (!port->mapbase)
 | 
						|
		return -ENODEV;
 | 
						|
 | 
						|
	/* enable usp in mode1 register */
 | 
						|
	if (sirfport->uart_reg->uart_type == SIRF_USP_UART)
 | 
						|
		wr_regl(port, ureg->sirfsoc_mode1, SIRFSOC_USP_EN |
 | 
						|
				SIRFSOC_USP_ENDIAN_CTRL_LSBF);
 | 
						|
	if (options)
 | 
						|
		uart_parse_options(options, &baud, &parity, &bits, &flow);
 | 
						|
	port->cons = co;
 | 
						|
 | 
						|
	/* default console tx/rx transfer using io mode */
 | 
						|
	sirfport->rx_dma_no = UNVALID_DMA_CHAN;
 | 
						|
	sirfport->tx_dma_no = UNVALID_DMA_CHAN;
 | 
						|
	return uart_set_options(port, co, baud, parity, bits, flow);
 | 
						|
}
 | 
						|
 | 
						|
static void sirfsoc_uart_console_putchar(struct uart_port *port, int ch)
 | 
						|
{
 | 
						|
	struct sirfsoc_uart_port *sirfport = to_sirfport(port);
 | 
						|
	struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
 | 
						|
	struct sirfsoc_fifo_status *ufifo_st = &sirfport->uart_reg->fifo_status;
 | 
						|
	while (rd_regl(port,
 | 
						|
		ureg->sirfsoc_tx_fifo_status) & ufifo_st->ff_full(port->line))
 | 
						|
		cpu_relax();
 | 
						|
	wr_regb(port, ureg->sirfsoc_tx_fifo_data, ch);
 | 
						|
}
 | 
						|
 | 
						|
static void sirfsoc_uart_console_write(struct console *co, const char *s,
 | 
						|
							unsigned int count)
 | 
						|
{
 | 
						|
	struct uart_port *port = &sirfsoc_uart_ports[co->index].port;
 | 
						|
	uart_console_write(port, s, count, sirfsoc_uart_console_putchar);
 | 
						|
}
 | 
						|
 | 
						|
static struct console sirfsoc_uart_console = {
 | 
						|
	.name		= SIRFSOC_UART_NAME,
 | 
						|
	.device		= uart_console_device,
 | 
						|
	.flags		= CON_PRINTBUFFER,
 | 
						|
	.index		= -1,
 | 
						|
	.write		= sirfsoc_uart_console_write,
 | 
						|
	.setup		= sirfsoc_uart_console_setup,
 | 
						|
	.data           = &sirfsoc_uart_drv,
 | 
						|
};
 | 
						|
 | 
						|
static int __init sirfsoc_uart_console_init(void)
 | 
						|
{
 | 
						|
	register_console(&sirfsoc_uart_console);
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
console_initcall(sirfsoc_uart_console_init);
 | 
						|
#endif
 | 
						|
 | 
						|
static struct uart_driver sirfsoc_uart_drv = {
 | 
						|
	.owner		= THIS_MODULE,
 | 
						|
	.driver_name	= SIRFUART_PORT_NAME,
 | 
						|
	.nr		= SIRFSOC_UART_NR,
 | 
						|
	.dev_name	= SIRFSOC_UART_NAME,
 | 
						|
	.major		= SIRFSOC_UART_MAJOR,
 | 
						|
	.minor		= SIRFSOC_UART_MINOR,
 | 
						|
#ifdef CONFIG_SERIAL_SIRFSOC_CONSOLE
 | 
						|
	.cons			= &sirfsoc_uart_console,
 | 
						|
#else
 | 
						|
	.cons			= NULL,
 | 
						|
#endif
 | 
						|
};
 | 
						|
 | 
						|
static struct of_device_id sirfsoc_uart_ids[] = {
 | 
						|
	{ .compatible = "sirf,prima2-uart", .data = &sirfsoc_uart,},
 | 
						|
	{ .compatible = "sirf,marco-uart", .data = &sirfsoc_uart},
 | 
						|
	{ .compatible = "sirf,prima2-usp-uart", .data = &sirfsoc_usp},
 | 
						|
	{}
 | 
						|
};
 | 
						|
MODULE_DEVICE_TABLE(of, sirfsoc_uart_ids);
 | 
						|
 | 
						|
static int sirfsoc_uart_probe(struct platform_device *pdev)
 | 
						|
{
 | 
						|
	struct sirfsoc_uart_port *sirfport;
 | 
						|
	struct uart_port *port;
 | 
						|
	struct resource *res;
 | 
						|
	int ret;
 | 
						|
	const struct of_device_id *match;
 | 
						|
 | 
						|
	match = of_match_node(sirfsoc_uart_ids, pdev->dev.of_node);
 | 
						|
	if (of_property_read_u32(pdev->dev.of_node, "cell-index", &pdev->id)) {
 | 
						|
		dev_err(&pdev->dev,
 | 
						|
			"Unable to find cell-index in uart node.\n");
 | 
						|
		ret = -EFAULT;
 | 
						|
		goto err;
 | 
						|
	}
 | 
						|
	if (of_device_is_compatible(pdev->dev.of_node, "sirf,prima2-usp-uart"))
 | 
						|
		pdev->id += ((struct sirfsoc_uart_register *)
 | 
						|
				match->data)->uart_param.register_uart_nr;
 | 
						|
	sirfport = &sirfsoc_uart_ports[pdev->id];
 | 
						|
	port = &sirfport->port;
 | 
						|
	port->dev = &pdev->dev;
 | 
						|
	port->private_data = sirfport;
 | 
						|
	sirfport->uart_reg = (struct sirfsoc_uart_register *)match->data;
 | 
						|
 | 
						|
	sirfport->hw_flow_ctrl = of_property_read_bool(pdev->dev.of_node,
 | 
						|
		"sirf,uart-has-rtscts");
 | 
						|
	if (of_device_is_compatible(pdev->dev.of_node, "sirf,prima2-uart")) {
 | 
						|
		sirfport->uart_reg->uart_type = SIRF_REAL_UART;
 | 
						|
		if (of_property_read_u32(pdev->dev.of_node,
 | 
						|
				"sirf,uart-dma-rx-channel",
 | 
						|
				&sirfport->rx_dma_no))
 | 
						|
			sirfport->rx_dma_no = UNVALID_DMA_CHAN;
 | 
						|
		if (of_property_read_u32(pdev->dev.of_node,
 | 
						|
				"sirf,uart-dma-tx-channel",
 | 
						|
				&sirfport->tx_dma_no))
 | 
						|
			sirfport->tx_dma_no = UNVALID_DMA_CHAN;
 | 
						|
	}
 | 
						|
	if (of_device_is_compatible(pdev->dev.of_node, "sirf,prima2-usp-uart")) {
 | 
						|
		sirfport->uart_reg->uart_type =	SIRF_USP_UART;
 | 
						|
		if (of_property_read_u32(pdev->dev.of_node,
 | 
						|
				"sirf,usp-dma-rx-channel",
 | 
						|
				&sirfport->rx_dma_no))
 | 
						|
			sirfport->rx_dma_no = UNVALID_DMA_CHAN;
 | 
						|
		if (of_property_read_u32(pdev->dev.of_node,
 | 
						|
				"sirf,usp-dma-tx-channel",
 | 
						|
				&sirfport->tx_dma_no))
 | 
						|
			sirfport->tx_dma_no = UNVALID_DMA_CHAN;
 | 
						|
		if (!sirfport->hw_flow_ctrl)
 | 
						|
			goto usp_no_flow_control;
 | 
						|
		if (of_find_property(pdev->dev.of_node, "cts-gpios", NULL))
 | 
						|
			sirfport->cts_gpio = of_get_named_gpio(
 | 
						|
					pdev->dev.of_node, "cts-gpios", 0);
 | 
						|
		else
 | 
						|
			sirfport->cts_gpio = -1;
 | 
						|
		if (of_find_property(pdev->dev.of_node, "rts-gpios", NULL))
 | 
						|
			sirfport->rts_gpio = of_get_named_gpio(
 | 
						|
					pdev->dev.of_node, "rts-gpios", 0);
 | 
						|
		else
 | 
						|
			sirfport->rts_gpio = -1;
 | 
						|
 | 
						|
		if ((!gpio_is_valid(sirfport->cts_gpio) ||
 | 
						|
			 !gpio_is_valid(sirfport->rts_gpio))) {
 | 
						|
			ret = -EINVAL;
 | 
						|
			dev_err(&pdev->dev,
 | 
						|
				"Usp flow control must have cts and rts gpio");
 | 
						|
			goto err;
 | 
						|
		}
 | 
						|
		ret = devm_gpio_request(&pdev->dev, sirfport->cts_gpio,
 | 
						|
				"usp-cts-gpio");
 | 
						|
		if (ret) {
 | 
						|
			dev_err(&pdev->dev, "Unable request cts gpio");
 | 
						|
			goto err;
 | 
						|
		}
 | 
						|
		gpio_direction_input(sirfport->cts_gpio);
 | 
						|
		ret = devm_gpio_request(&pdev->dev, sirfport->rts_gpio,
 | 
						|
				"usp-rts-gpio");
 | 
						|
		if (ret) {
 | 
						|
			dev_err(&pdev->dev, "Unable request rts gpio");
 | 
						|
			goto err;
 | 
						|
		}
 | 
						|
		gpio_direction_output(sirfport->rts_gpio, 1);
 | 
						|
	}
 | 
						|
usp_no_flow_control:
 | 
						|
	if (of_device_is_compatible(pdev->dev.of_node, "sirf,marco-uart"))
 | 
						|
		sirfport->is_marco = true;
 | 
						|
 | 
						|
	if (of_property_read_u32(pdev->dev.of_node,
 | 
						|
			"fifosize",
 | 
						|
			&port->fifosize)) {
 | 
						|
		dev_err(&pdev->dev,
 | 
						|
			"Unable to find fifosize in uart node.\n");
 | 
						|
		ret = -EFAULT;
 | 
						|
		goto err;
 | 
						|
	}
 | 
						|
 | 
						|
	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 | 
						|
	if (res == NULL) {
 | 
						|
		dev_err(&pdev->dev, "Insufficient resources.\n");
 | 
						|
		ret = -EFAULT;
 | 
						|
		goto err;
 | 
						|
	}
 | 
						|
	spin_lock_init(&sirfport->rx_lock);
 | 
						|
	spin_lock_init(&sirfport->tx_lock);
 | 
						|
	tasklet_init(&sirfport->rx_dma_complete_tasklet,
 | 
						|
			sirfsoc_uart_rx_dma_complete_tl, (unsigned long)sirfport);
 | 
						|
	tasklet_init(&sirfport->rx_tmo_process_tasklet,
 | 
						|
			sirfsoc_rx_tmo_process_tl, (unsigned long)sirfport);
 | 
						|
	port->mapbase = res->start;
 | 
						|
	port->membase = devm_ioremap(&pdev->dev, res->start, resource_size(res));
 | 
						|
	if (!port->membase) {
 | 
						|
		dev_err(&pdev->dev, "Cannot remap resource.\n");
 | 
						|
		ret = -ENOMEM;
 | 
						|
		goto err;
 | 
						|
	}
 | 
						|
	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 | 
						|
	if (res == NULL) {
 | 
						|
		dev_err(&pdev->dev, "Insufficient resources.\n");
 | 
						|
		ret = -EFAULT;
 | 
						|
		goto err;
 | 
						|
	}
 | 
						|
	port->irq = res->start;
 | 
						|
 | 
						|
	sirfport->clk = clk_get(&pdev->dev, NULL);
 | 
						|
	if (IS_ERR(sirfport->clk)) {
 | 
						|
		ret = PTR_ERR(sirfport->clk);
 | 
						|
		goto err;
 | 
						|
	}
 | 
						|
	clk_prepare_enable(sirfport->clk);
 | 
						|
	port->uartclk = clk_get_rate(sirfport->clk);
 | 
						|
 | 
						|
	port->ops = &sirfsoc_uart_ops;
 | 
						|
	spin_lock_init(&port->lock);
 | 
						|
 | 
						|
	platform_set_drvdata(pdev, sirfport);
 | 
						|
	ret = uart_add_one_port(&sirfsoc_uart_drv, port);
 | 
						|
	if (ret != 0) {
 | 
						|
		dev_err(&pdev->dev, "Cannot add UART port(%d).\n", pdev->id);
 | 
						|
		goto port_err;
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
 | 
						|
port_err:
 | 
						|
	clk_disable_unprepare(sirfport->clk);
 | 
						|
	clk_put(sirfport->clk);
 | 
						|
err:
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int sirfsoc_uart_remove(struct platform_device *pdev)
 | 
						|
{
 | 
						|
	struct sirfsoc_uart_port *sirfport = platform_get_drvdata(pdev);
 | 
						|
	struct uart_port *port = &sirfport->port;
 | 
						|
	clk_disable_unprepare(sirfport->clk);
 | 
						|
	clk_put(sirfport->clk);
 | 
						|
	uart_remove_one_port(&sirfsoc_uart_drv, port);
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int
 | 
						|
sirfsoc_uart_suspend(struct platform_device *pdev, pm_message_t state)
 | 
						|
{
 | 
						|
	struct sirfsoc_uart_port *sirfport = platform_get_drvdata(pdev);
 | 
						|
	struct uart_port *port = &sirfport->port;
 | 
						|
	uart_suspend_port(&sirfsoc_uart_drv, port);
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int sirfsoc_uart_resume(struct platform_device *pdev)
 | 
						|
{
 | 
						|
	struct sirfsoc_uart_port *sirfport = platform_get_drvdata(pdev);
 | 
						|
	struct uart_port *port = &sirfport->port;
 | 
						|
	uart_resume_port(&sirfsoc_uart_drv, port);
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static struct platform_driver sirfsoc_uart_driver = {
 | 
						|
	.probe		= sirfsoc_uart_probe,
 | 
						|
	.remove		= sirfsoc_uart_remove,
 | 
						|
	.suspend	= sirfsoc_uart_suspend,
 | 
						|
	.resume		= sirfsoc_uart_resume,
 | 
						|
	.driver		= {
 | 
						|
		.name	= SIRFUART_PORT_NAME,
 | 
						|
		.owner	= THIS_MODULE,
 | 
						|
		.of_match_table = sirfsoc_uart_ids,
 | 
						|
	},
 | 
						|
};
 | 
						|
 | 
						|
static int __init sirfsoc_uart_init(void)
 | 
						|
{
 | 
						|
	int ret = 0;
 | 
						|
 | 
						|
	ret = uart_register_driver(&sirfsoc_uart_drv);
 | 
						|
	if (ret)
 | 
						|
		goto out;
 | 
						|
 | 
						|
	ret = platform_driver_register(&sirfsoc_uart_driver);
 | 
						|
	if (ret)
 | 
						|
		uart_unregister_driver(&sirfsoc_uart_drv);
 | 
						|
out:
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
module_init(sirfsoc_uart_init);
 | 
						|
 | 
						|
static void __exit sirfsoc_uart_exit(void)
 | 
						|
{
 | 
						|
	platform_driver_unregister(&sirfsoc_uart_driver);
 | 
						|
	uart_unregister_driver(&sirfsoc_uart_drv);
 | 
						|
}
 | 
						|
module_exit(sirfsoc_uart_exit);
 | 
						|
 | 
						|
MODULE_LICENSE("GPL v2");
 | 
						|
MODULE_AUTHOR("Bin Shi <Bin.Shi@csr.com>, Rong Wang<Rong.Wang@csr.com>");
 | 
						|
MODULE_DESCRIPTION("CSR SiRFprimaII Uart Driver");
 |