cf93c94581
MODULE_DEVICE_TABLE only expands to something if it's compiled for a module. So when building-in support for the phys, the mdio_device_id tables are unused. Marking them with __maybe_unused fixes the following warnings: drivers/net/phy/bcm63xx.c:134: warning: 'bcm63xx_tbl' defined but not used drivers/net/phy/broadcom.c:933: warning: 'broadcom_tbl' defined but not used drivers/net/phy/cicada.c:162: warning: 'cicada_tbl' defined but not used drivers/net/phy/davicom.c:222: warning: 'davicom_tbl' defined but not used drivers/net/phy/et1011c.c:114: warning: 'et1011c_tbl' defined but not used drivers/net/phy/icplus.c:137: warning: 'icplus_tbl' defined but not used drivers/net/phy/lxt.c:226: warning: 'lxt_tbl' defined but not used drivers/net/phy/marvell.c:724: warning: 'marvell_tbl' defined but not used drivers/net/phy/micrel.c:234: warning: 'micrel_tbl' defined but not used drivers/net/phy/national.c:154: warning: 'ns_tbl' defined but not used drivers/net/phy/qsemi.c:141: warning: 'qs6612_tbl' defined but not used drivers/net/phy/realtek.c:82: warning: 'realtek_tbl' defined but not used drivers/net/phy/smsc.c:257: warning: 'smsc_tbl' defined but not used drivers/net/phy/ste10Xp.c:135: warning: 'ste10Xp_tbl' defined but not used drivers/net/phy/vitesse.c:195: warning: 'vitesse_tbl' defined but not used Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
243 lines
6.5 KiB
C
243 lines
6.5 KiB
C
/*
|
|
* drivers/net/phy/micrel.c
|
|
*
|
|
* Driver for Micrel PHYs
|
|
*
|
|
* Author: David J. Choi
|
|
*
|
|
* Copyright (c) 2010 Micrel, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
* Support : ksz9021 1000/100/10 phy from Micrel
|
|
* ks8001, ks8737, ks8721, ks8041, ks8051 100/10 phy
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/phy.h>
|
|
|
|
#define PHY_ID_KSZ9021 0x00221611
|
|
#define PHY_ID_KS8737 0x00221720
|
|
#define PHY_ID_KS8041 0x00221510
|
|
#define PHY_ID_KS8051 0x00221550
|
|
/* both for ks8001 Rev. A/B, and for ks8721 Rev 3. */
|
|
#define PHY_ID_KS8001 0x0022161A
|
|
|
|
/* general Interrupt control/status reg in vendor specific block. */
|
|
#define MII_KSZPHY_INTCS 0x1B
|
|
#define KSZPHY_INTCS_JABBER (1 << 15)
|
|
#define KSZPHY_INTCS_RECEIVE_ERR (1 << 14)
|
|
#define KSZPHY_INTCS_PAGE_RECEIVE (1 << 13)
|
|
#define KSZPHY_INTCS_PARELLEL (1 << 12)
|
|
#define KSZPHY_INTCS_LINK_PARTNER_ACK (1 << 11)
|
|
#define KSZPHY_INTCS_LINK_DOWN (1 << 10)
|
|
#define KSZPHY_INTCS_REMOTE_FAULT (1 << 9)
|
|
#define KSZPHY_INTCS_LINK_UP (1 << 8)
|
|
#define KSZPHY_INTCS_ALL (KSZPHY_INTCS_LINK_UP |\
|
|
KSZPHY_INTCS_LINK_DOWN)
|
|
|
|
/* general PHY control reg in vendor specific block. */
|
|
#define MII_KSZPHY_CTRL 0x1F
|
|
/* bitmap of PHY register to set interrupt mode */
|
|
#define KSZPHY_CTRL_INT_ACTIVE_HIGH (1 << 9)
|
|
#define KSZ9021_CTRL_INT_ACTIVE_HIGH (1 << 14)
|
|
#define KS8737_CTRL_INT_ACTIVE_HIGH (1 << 14)
|
|
|
|
static int kszphy_ack_interrupt(struct phy_device *phydev)
|
|
{
|
|
/* bit[7..0] int status, which is a read and clear register. */
|
|
int rc;
|
|
|
|
rc = phy_read(phydev, MII_KSZPHY_INTCS);
|
|
|
|
return (rc < 0) ? rc : 0;
|
|
}
|
|
|
|
static int kszphy_set_interrupt(struct phy_device *phydev)
|
|
{
|
|
int temp;
|
|
temp = (PHY_INTERRUPT_ENABLED == phydev->interrupts) ?
|
|
KSZPHY_INTCS_ALL : 0;
|
|
return phy_write(phydev, MII_KSZPHY_INTCS, temp);
|
|
}
|
|
|
|
static int kszphy_config_intr(struct phy_device *phydev)
|
|
{
|
|
int temp, rc;
|
|
|
|
/* set the interrupt pin active low */
|
|
temp = phy_read(phydev, MII_KSZPHY_CTRL);
|
|
temp &= ~KSZPHY_CTRL_INT_ACTIVE_HIGH;
|
|
phy_write(phydev, MII_KSZPHY_CTRL, temp);
|
|
rc = kszphy_set_interrupt(phydev);
|
|
return rc < 0 ? rc : 0;
|
|
}
|
|
|
|
static int ksz9021_config_intr(struct phy_device *phydev)
|
|
{
|
|
int temp, rc;
|
|
|
|
/* set the interrupt pin active low */
|
|
temp = phy_read(phydev, MII_KSZPHY_CTRL);
|
|
temp &= ~KSZ9021_CTRL_INT_ACTIVE_HIGH;
|
|
phy_write(phydev, MII_KSZPHY_CTRL, temp);
|
|
rc = kszphy_set_interrupt(phydev);
|
|
return rc < 0 ? rc : 0;
|
|
}
|
|
|
|
static int ks8737_config_intr(struct phy_device *phydev)
|
|
{
|
|
int temp, rc;
|
|
|
|
/* set the interrupt pin active low */
|
|
temp = phy_read(phydev, MII_KSZPHY_CTRL);
|
|
temp &= ~KS8737_CTRL_INT_ACTIVE_HIGH;
|
|
phy_write(phydev, MII_KSZPHY_CTRL, temp);
|
|
rc = kszphy_set_interrupt(phydev);
|
|
return rc < 0 ? rc : 0;
|
|
}
|
|
|
|
static int kszphy_config_init(struct phy_device *phydev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static struct phy_driver ks8737_driver = {
|
|
.phy_id = PHY_ID_KS8737,
|
|
.phy_id_mask = 0x00fffff0,
|
|
.name = "Micrel KS8737",
|
|
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
|
|
.flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
|
|
.config_init = kszphy_config_init,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.ack_interrupt = kszphy_ack_interrupt,
|
|
.config_intr = ks8737_config_intr,
|
|
.driver = { .owner = THIS_MODULE,},
|
|
};
|
|
|
|
static struct phy_driver ks8041_driver = {
|
|
.phy_id = PHY_ID_KS8041,
|
|
.phy_id_mask = 0x00fffff0,
|
|
.name = "Micrel KS8041",
|
|
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause
|
|
| SUPPORTED_Asym_Pause),
|
|
.flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
|
|
.config_init = kszphy_config_init,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.ack_interrupt = kszphy_ack_interrupt,
|
|
.config_intr = kszphy_config_intr,
|
|
.driver = { .owner = THIS_MODULE,},
|
|
};
|
|
|
|
static struct phy_driver ks8051_driver = {
|
|
.phy_id = PHY_ID_KS8051,
|
|
.phy_id_mask = 0x00fffff0,
|
|
.name = "Micrel KS8051",
|
|
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause
|
|
| SUPPORTED_Asym_Pause),
|
|
.flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
|
|
.config_init = kszphy_config_init,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.ack_interrupt = kszphy_ack_interrupt,
|
|
.config_intr = kszphy_config_intr,
|
|
.driver = { .owner = THIS_MODULE,},
|
|
};
|
|
|
|
static struct phy_driver ks8001_driver = {
|
|
.phy_id = PHY_ID_KS8001,
|
|
.name = "Micrel KS8001 or KS8721",
|
|
.phy_id_mask = 0x00fffff0,
|
|
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
|
|
.flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
|
|
.config_init = kszphy_config_init,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.ack_interrupt = kszphy_ack_interrupt,
|
|
.config_intr = kszphy_config_intr,
|
|
.driver = { .owner = THIS_MODULE,},
|
|
};
|
|
|
|
static struct phy_driver ksz9021_driver = {
|
|
.phy_id = PHY_ID_KSZ9021,
|
|
.phy_id_mask = 0x000fff10,
|
|
.name = "Micrel KSZ9021 Gigabit PHY",
|
|
.features = (PHY_GBIT_FEATURES | SUPPORTED_Pause
|
|
| SUPPORTED_Asym_Pause),
|
|
.flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
|
|
.config_init = kszphy_config_init,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.ack_interrupt = kszphy_ack_interrupt,
|
|
.config_intr = ksz9021_config_intr,
|
|
.driver = { .owner = THIS_MODULE, },
|
|
};
|
|
|
|
static int __init ksphy_init(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = phy_driver_register(&ks8001_driver);
|
|
if (ret)
|
|
goto err1;
|
|
|
|
ret = phy_driver_register(&ksz9021_driver);
|
|
if (ret)
|
|
goto err2;
|
|
|
|
ret = phy_driver_register(&ks8737_driver);
|
|
if (ret)
|
|
goto err3;
|
|
ret = phy_driver_register(&ks8041_driver);
|
|
if (ret)
|
|
goto err4;
|
|
ret = phy_driver_register(&ks8051_driver);
|
|
if (ret)
|
|
goto err5;
|
|
|
|
return 0;
|
|
|
|
err5:
|
|
phy_driver_unregister(&ks8041_driver);
|
|
err4:
|
|
phy_driver_unregister(&ks8737_driver);
|
|
err3:
|
|
phy_driver_unregister(&ksz9021_driver);
|
|
err2:
|
|
phy_driver_unregister(&ks8001_driver);
|
|
err1:
|
|
return ret;
|
|
}
|
|
|
|
static void __exit ksphy_exit(void)
|
|
{
|
|
phy_driver_unregister(&ks8001_driver);
|
|
phy_driver_unregister(&ks8737_driver);
|
|
phy_driver_unregister(&ksz9021_driver);
|
|
phy_driver_unregister(&ks8041_driver);
|
|
phy_driver_unregister(&ks8051_driver);
|
|
}
|
|
|
|
module_init(ksphy_init);
|
|
module_exit(ksphy_exit);
|
|
|
|
MODULE_DESCRIPTION("Micrel PHY driver");
|
|
MODULE_AUTHOR("David J. Choi");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
static struct mdio_device_id __maybe_unused micrel_tbl[] = {
|
|
{ PHY_ID_KSZ9021, 0x000fff10 },
|
|
{ PHY_ID_KS8001, 0x00fffff0 },
|
|
{ PHY_ID_KS8737, 0x00fffff0 },
|
|
{ PHY_ID_KS8041, 0x00fffff0 },
|
|
{ PHY_ID_KS8051, 0x00fffff0 },
|
|
{ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(mdio, micrel_tbl);
|