 7ab0f2736b
			
		
	
	
	7ab0f2736b
	
	
	
		
			
			dev_ioctl() already checks capable(CAP_NET_ADMIN) before calling the driver's implementation of MDIO ioctls. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
		
			
				
	
	
		
			490 lines
		
	
	
	
		
			13 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			490 lines
		
	
	
	
		
			13 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
| 
 | |
| 	mii.c: MII interface library
 | |
| 
 | |
| 	Maintained by Jeff Garzik <jgarzik@pobox.com>
 | |
| 	Copyright 2001,2002 Jeff Garzik
 | |
| 
 | |
| 	Various code came from myson803.c and other files by
 | |
| 	Donald Becker.  Copyright:
 | |
| 
 | |
| 		Written 1998-2002 by Donald Becker.
 | |
| 
 | |
| 		This software may be used and distributed according
 | |
| 		to the terms of the GNU General Public License (GPL),
 | |
| 		incorporated herein by reference.  Drivers based on
 | |
| 		or derived from this code fall under the GPL and must
 | |
| 		retain the authorship, copyright and license notice.
 | |
| 		This file is not a complete program and may only be
 | |
| 		used when the entire operating system is licensed
 | |
| 		under the GPL.
 | |
| 
 | |
| 		The author may be reached as becker@scyld.com, or C/O
 | |
| 		Scyld Computing Corporation
 | |
| 		410 Severn Ave., Suite 210
 | |
| 		Annapolis MD 21403
 | |
| 
 | |
| 
 | |
|  */
 | |
| 
 | |
| #include <linux/kernel.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/netdevice.h>
 | |
| #include <linux/ethtool.h>
 | |
| #include <linux/mdio.h>
 | |
| 
 | |
| static u32 mii_get_an(struct mii_if_info *mii, u16 addr)
 | |
| {
 | |
| 	u32 result = 0;
 | |
| 	int advert;
 | |
| 
 | |
| 	advert = mii->mdio_read(mii->dev, mii->phy_id, addr);
 | |
| 	if (advert & LPA_LPACK)
 | |
| 		result |= ADVERTISED_Autoneg;
 | |
| 	if (advert & ADVERTISE_10HALF)
 | |
| 		result |= ADVERTISED_10baseT_Half;
 | |
| 	if (advert & ADVERTISE_10FULL)
 | |
| 		result |= ADVERTISED_10baseT_Full;
 | |
| 	if (advert & ADVERTISE_100HALF)
 | |
| 		result |= ADVERTISED_100baseT_Half;
 | |
| 	if (advert & ADVERTISE_100FULL)
 | |
| 		result |= ADVERTISED_100baseT_Full;
 | |
| 
 | |
| 	return result;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * mii_ethtool_gset - get settings that are specified in @ecmd
 | |
|  * @mii: MII interface
 | |
|  * @ecmd: requested ethtool_cmd
 | |
|  *
 | |
|  * Returns 0 for success, negative on error.
 | |
|  */
 | |
| int mii_ethtool_gset(struct mii_if_info *mii, struct ethtool_cmd *ecmd)
 | |
| {
 | |
| 	struct net_device *dev = mii->dev;
 | |
| 	u16 bmcr, bmsr, ctrl1000 = 0, stat1000 = 0;
 | |
| 	u32 nego;
 | |
| 
 | |
| 	ecmd->supported =
 | |
| 	    (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
 | |
| 	     SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
 | |
| 	     SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII);
 | |
| 	if (mii->supports_gmii)
 | |
| 		ecmd->supported |= SUPPORTED_1000baseT_Half |
 | |
| 			SUPPORTED_1000baseT_Full;
 | |
| 
 | |
| 	/* only supports twisted-pair */
 | |
| 	ecmd->port = PORT_MII;
 | |
| 
 | |
| 	/* only supports internal transceiver */
 | |
| 	ecmd->transceiver = XCVR_INTERNAL;
 | |
| 
 | |
| 	/* this isn't fully supported at higher layers */
 | |
| 	ecmd->phy_address = mii->phy_id;
 | |
| 	ecmd->mdio_support = MDIO_SUPPORTS_C22;
 | |
| 
 | |
| 	ecmd->advertising = ADVERTISED_TP | ADVERTISED_MII;
 | |
| 
 | |
| 	bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR);
 | |
| 	bmsr = mii->mdio_read(dev, mii->phy_id, MII_BMSR);
 | |
| 	if (mii->supports_gmii) {
 | |
|  		ctrl1000 = mii->mdio_read(dev, mii->phy_id, MII_CTRL1000);
 | |
| 		stat1000 = mii->mdio_read(dev, mii->phy_id, MII_STAT1000);
 | |
| 	}
 | |
| 	if (bmcr & BMCR_ANENABLE) {
 | |
| 		ecmd->advertising |= ADVERTISED_Autoneg;
 | |
| 		ecmd->autoneg = AUTONEG_ENABLE;
 | |
| 
 | |
| 		ecmd->advertising |= mii_get_an(mii, MII_ADVERTISE);
 | |
| 		if (ctrl1000 & ADVERTISE_1000HALF)
 | |
| 			ecmd->advertising |= ADVERTISED_1000baseT_Half;
 | |
| 		if (ctrl1000 & ADVERTISE_1000FULL)
 | |
| 			ecmd->advertising |= ADVERTISED_1000baseT_Full;
 | |
| 
 | |
| 		if (bmsr & BMSR_ANEGCOMPLETE) {
 | |
| 			ecmd->lp_advertising = mii_get_an(mii, MII_LPA);
 | |
| 			if (stat1000 & LPA_1000HALF)
 | |
| 				ecmd->lp_advertising |=
 | |
| 					ADVERTISED_1000baseT_Half;
 | |
| 			if (stat1000 & LPA_1000FULL)
 | |
| 				ecmd->lp_advertising |=
 | |
| 					ADVERTISED_1000baseT_Full;
 | |
| 		} else {
 | |
| 			ecmd->lp_advertising = 0;
 | |
| 		}
 | |
| 
 | |
| 		nego = ecmd->advertising & ecmd->lp_advertising;
 | |
| 
 | |
| 		if (nego & (ADVERTISED_1000baseT_Full |
 | |
| 			    ADVERTISED_1000baseT_Half)) {
 | |
| 			ecmd->speed = SPEED_1000;
 | |
| 			ecmd->duplex = !!(nego & ADVERTISED_1000baseT_Full);
 | |
| 		} else if (nego & (ADVERTISED_100baseT_Full |
 | |
| 				   ADVERTISED_100baseT_Half)) {
 | |
| 			ecmd->speed = SPEED_100;
 | |
| 			ecmd->duplex = !!(nego & ADVERTISED_100baseT_Full);
 | |
| 		} else {
 | |
| 			ecmd->speed = SPEED_10;
 | |
| 			ecmd->duplex = !!(nego & ADVERTISED_10baseT_Full);
 | |
| 		}
 | |
| 	} else {
 | |
| 		ecmd->autoneg = AUTONEG_DISABLE;
 | |
| 
 | |
| 		ecmd->speed = ((bmcr & BMCR_SPEED1000 &&
 | |
| 				(bmcr & BMCR_SPEED100) == 0) ? SPEED_1000 :
 | |
| 			       (bmcr & BMCR_SPEED100) ? SPEED_100 : SPEED_10);
 | |
| 		ecmd->duplex = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF;
 | |
| 	}
 | |
| 
 | |
| 	mii->full_duplex = ecmd->duplex;
 | |
| 
 | |
| 	/* ignore maxtxpkt, maxrxpkt for now */
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * mii_ethtool_sset - set settings that are specified in @ecmd
 | |
|  * @mii: MII interface
 | |
|  * @ecmd: requested ethtool_cmd
 | |
|  *
 | |
|  * Returns 0 for success, negative on error.
 | |
|  */
 | |
| int mii_ethtool_sset(struct mii_if_info *mii, struct ethtool_cmd *ecmd)
 | |
| {
 | |
| 	struct net_device *dev = mii->dev;
 | |
| 
 | |
| 	if (ecmd->speed != SPEED_10 &&
 | |
| 	    ecmd->speed != SPEED_100 &&
 | |
| 	    ecmd->speed != SPEED_1000)
 | |
| 		return -EINVAL;
 | |
| 	if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL)
 | |
| 		return -EINVAL;
 | |
| 	if (ecmd->port != PORT_MII)
 | |
| 		return -EINVAL;
 | |
| 	if (ecmd->transceiver != XCVR_INTERNAL)
 | |
| 		return -EINVAL;
 | |
| 	if (ecmd->phy_address != mii->phy_id)
 | |
| 		return -EINVAL;
 | |
| 	if (ecmd->autoneg != AUTONEG_DISABLE && ecmd->autoneg != AUTONEG_ENABLE)
 | |
| 		return -EINVAL;
 | |
| 	if ((ecmd->speed == SPEED_1000) && (!mii->supports_gmii))
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	/* ignore supported, maxtxpkt, maxrxpkt */
 | |
| 
 | |
| 	if (ecmd->autoneg == AUTONEG_ENABLE) {
 | |
| 		u32 bmcr, advert, tmp;
 | |
| 		u32 advert2 = 0, tmp2 = 0;
 | |
| 
 | |
| 		if ((ecmd->advertising & (ADVERTISED_10baseT_Half |
 | |
| 					  ADVERTISED_10baseT_Full |
 | |
| 					  ADVERTISED_100baseT_Half |
 | |
| 					  ADVERTISED_100baseT_Full |
 | |
| 					  ADVERTISED_1000baseT_Half |
 | |
| 					  ADVERTISED_1000baseT_Full)) == 0)
 | |
| 			return -EINVAL;
 | |
| 
 | |
| 		/* advertise only what has been requested */
 | |
| 		advert = mii->mdio_read(dev, mii->phy_id, MII_ADVERTISE);
 | |
| 		tmp = advert & ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
 | |
| 		if (mii->supports_gmii) {
 | |
| 			advert2 = mii->mdio_read(dev, mii->phy_id, MII_CTRL1000);
 | |
| 			tmp2 = advert2 & ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL);
 | |
| 		}
 | |
| 		if (ecmd->advertising & ADVERTISED_10baseT_Half)
 | |
| 			tmp |= ADVERTISE_10HALF;
 | |
| 		if (ecmd->advertising & ADVERTISED_10baseT_Full)
 | |
| 			tmp |= ADVERTISE_10FULL;
 | |
| 		if (ecmd->advertising & ADVERTISED_100baseT_Half)
 | |
| 			tmp |= ADVERTISE_100HALF;
 | |
| 		if (ecmd->advertising & ADVERTISED_100baseT_Full)
 | |
| 			tmp |= ADVERTISE_100FULL;
 | |
| 		if (mii->supports_gmii) {
 | |
| 			if (ecmd->advertising & ADVERTISED_1000baseT_Half)
 | |
| 				tmp2 |= ADVERTISE_1000HALF;
 | |
| 			if (ecmd->advertising & ADVERTISED_1000baseT_Full)
 | |
| 				tmp2 |= ADVERTISE_1000FULL;
 | |
| 		}
 | |
| 		if (advert != tmp) {
 | |
| 			mii->mdio_write(dev, mii->phy_id, MII_ADVERTISE, tmp);
 | |
| 			mii->advertising = tmp;
 | |
| 		}
 | |
| 		if ((mii->supports_gmii) && (advert2 != tmp2))
 | |
| 			mii->mdio_write(dev, mii->phy_id, MII_CTRL1000, tmp2);
 | |
| 
 | |
| 		/* turn on autonegotiation, and force a renegotiate */
 | |
| 		bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR);
 | |
| 		bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
 | |
| 		mii->mdio_write(dev, mii->phy_id, MII_BMCR, bmcr);
 | |
| 
 | |
| 		mii->force_media = 0;
 | |
| 	} else {
 | |
| 		u32 bmcr, tmp;
 | |
| 
 | |
| 		/* turn off auto negotiation, set speed and duplexity */
 | |
| 		bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR);
 | |
| 		tmp = bmcr & ~(BMCR_ANENABLE | BMCR_SPEED100 |
 | |
| 			       BMCR_SPEED1000 | BMCR_FULLDPLX);
 | |
| 		if (ecmd->speed == SPEED_1000)
 | |
| 			tmp |= BMCR_SPEED1000;
 | |
| 		else if (ecmd->speed == SPEED_100)
 | |
| 			tmp |= BMCR_SPEED100;
 | |
| 		if (ecmd->duplex == DUPLEX_FULL) {
 | |
| 			tmp |= BMCR_FULLDPLX;
 | |
| 			mii->full_duplex = 1;
 | |
| 		} else
 | |
| 			mii->full_duplex = 0;
 | |
| 		if (bmcr != tmp)
 | |
| 			mii->mdio_write(dev, mii->phy_id, MII_BMCR, tmp);
 | |
| 
 | |
| 		mii->force_media = 1;
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * mii_check_gmii_support - check if the MII supports Gb interfaces
 | |
|  * @mii: the MII interface
 | |
|  */
 | |
| int mii_check_gmii_support(struct mii_if_info *mii)
 | |
| {
 | |
| 	int reg;
 | |
| 
 | |
| 	reg = mii->mdio_read(mii->dev, mii->phy_id, MII_BMSR);
 | |
| 	if (reg & BMSR_ESTATEN) {
 | |
| 		reg = mii->mdio_read(mii->dev, mii->phy_id, MII_ESTATUS);
 | |
| 		if (reg & (ESTATUS_1000_TFULL | ESTATUS_1000_THALF))
 | |
| 			return 1;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * mii_link_ok - is link status up/ok
 | |
|  * @mii: the MII interface
 | |
|  *
 | |
|  * Returns 1 if the MII reports link status up/ok, 0 otherwise.
 | |
|  */
 | |
| int mii_link_ok (struct mii_if_info *mii)
 | |
| {
 | |
| 	/* first, a dummy read, needed to latch some MII phys */
 | |
| 	mii->mdio_read(mii->dev, mii->phy_id, MII_BMSR);
 | |
| 	if (mii->mdio_read(mii->dev, mii->phy_id, MII_BMSR) & BMSR_LSTATUS)
 | |
| 		return 1;
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * mii_nway_restart - restart NWay (autonegotiation) for this interface
 | |
|  * @mii: the MII interface
 | |
|  *
 | |
|  * Returns 0 on success, negative on error.
 | |
|  */
 | |
| int mii_nway_restart (struct mii_if_info *mii)
 | |
| {
 | |
| 	int bmcr;
 | |
| 	int r = -EINVAL;
 | |
| 
 | |
| 	/* if autoneg is off, it's an error */
 | |
| 	bmcr = mii->mdio_read(mii->dev, mii->phy_id, MII_BMCR);
 | |
| 
 | |
| 	if (bmcr & BMCR_ANENABLE) {
 | |
| 		bmcr |= BMCR_ANRESTART;
 | |
| 		mii->mdio_write(mii->dev, mii->phy_id, MII_BMCR, bmcr);
 | |
| 		r = 0;
 | |
| 	}
 | |
| 
 | |
| 	return r;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * mii_check_link - check MII link status
 | |
|  * @mii: MII interface
 | |
|  *
 | |
|  * If the link status changed (previous != current), call
 | |
|  * netif_carrier_on() if current link status is Up or call
 | |
|  * netif_carrier_off() if current link status is Down.
 | |
|  */
 | |
| void mii_check_link (struct mii_if_info *mii)
 | |
| {
 | |
| 	int cur_link = mii_link_ok(mii);
 | |
| 	int prev_link = netif_carrier_ok(mii->dev);
 | |
| 
 | |
| 	if (cur_link && !prev_link)
 | |
| 		netif_carrier_on(mii->dev);
 | |
| 	else if (prev_link && !cur_link)
 | |
| 		netif_carrier_off(mii->dev);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * mii_check_media - check the MII interface for a duplex change
 | |
|  * @mii: the MII interface
 | |
|  * @ok_to_print: OK to print link up/down messages
 | |
|  * @init_media: OK to save duplex mode in @mii
 | |
|  *
 | |
|  * Returns 1 if the duplex mode changed, 0 if not.
 | |
|  * If the media type is forced, always returns 0.
 | |
|  */
 | |
| unsigned int mii_check_media (struct mii_if_info *mii,
 | |
| 			      unsigned int ok_to_print,
 | |
| 			      unsigned int init_media)
 | |
| {
 | |
| 	unsigned int old_carrier, new_carrier;
 | |
| 	int advertise, lpa, media, duplex;
 | |
| 	int lpa2 = 0;
 | |
| 
 | |
| 	/* if forced media, go no further */
 | |
| 	if (mii->force_media)
 | |
| 		return 0; /* duplex did not change */
 | |
| 
 | |
| 	/* check current and old link status */
 | |
| 	old_carrier = netif_carrier_ok(mii->dev) ? 1 : 0;
 | |
| 	new_carrier = (unsigned int) mii_link_ok(mii);
 | |
| 
 | |
| 	/* if carrier state did not change, this is a "bounce",
 | |
| 	 * just exit as everything is already set correctly
 | |
| 	 */
 | |
| 	if ((!init_media) && (old_carrier == new_carrier))
 | |
| 		return 0; /* duplex did not change */
 | |
| 
 | |
| 	/* no carrier, nothing much to do */
 | |
| 	if (!new_carrier) {
 | |
| 		netif_carrier_off(mii->dev);
 | |
| 		if (ok_to_print)
 | |
| 			printk(KERN_INFO "%s: link down\n", mii->dev->name);
 | |
| 		return 0; /* duplex did not change */
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * we have carrier, see who's on the other end
 | |
| 	 */
 | |
| 	netif_carrier_on(mii->dev);
 | |
| 
 | |
| 	/* get MII advertise and LPA values */
 | |
| 	if ((!init_media) && (mii->advertising))
 | |
| 		advertise = mii->advertising;
 | |
| 	else {
 | |
| 		advertise = mii->mdio_read(mii->dev, mii->phy_id, MII_ADVERTISE);
 | |
| 		mii->advertising = advertise;
 | |
| 	}
 | |
| 	lpa = mii->mdio_read(mii->dev, mii->phy_id, MII_LPA);
 | |
| 	if (mii->supports_gmii)
 | |
| 		lpa2 = mii->mdio_read(mii->dev, mii->phy_id, MII_STAT1000);
 | |
| 
 | |
| 	/* figure out media and duplex from advertise and LPA values */
 | |
| 	media = mii_nway_result(lpa & advertise);
 | |
| 	duplex = (media & ADVERTISE_FULL) ? 1 : 0;
 | |
| 	if (lpa2 & LPA_1000FULL)
 | |
| 		duplex = 1;
 | |
| 
 | |
| 	if (ok_to_print)
 | |
| 		printk(KERN_INFO "%s: link up, %sMbps, %s-duplex, lpa 0x%04X\n",
 | |
| 		       mii->dev->name,
 | |
| 		       lpa2 & (LPA_1000FULL | LPA_1000HALF) ? "1000" :
 | |
| 		       media & (ADVERTISE_100FULL | ADVERTISE_100HALF) ? "100" : "10",
 | |
| 		       duplex ? "full" : "half",
 | |
| 		       lpa);
 | |
| 
 | |
| 	if ((init_media) || (mii->full_duplex != duplex)) {
 | |
| 		mii->full_duplex = duplex;
 | |
| 		return 1; /* duplex changed */
 | |
| 	}
 | |
| 
 | |
| 	return 0; /* duplex did not change */
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * generic_mii_ioctl - main MII ioctl interface
 | |
|  * @mii_if: the MII interface
 | |
|  * @mii_data: MII ioctl data structure
 | |
|  * @cmd: MII ioctl command
 | |
|  * @duplex_chg_out: pointer to @duplex_changed status if there was no
 | |
|  *	ioctl error
 | |
|  *
 | |
|  * Returns 0 on success, negative on error.
 | |
|  */
 | |
| int generic_mii_ioctl(struct mii_if_info *mii_if,
 | |
| 		      struct mii_ioctl_data *mii_data, int cmd,
 | |
| 		      unsigned int *duplex_chg_out)
 | |
| {
 | |
| 	int rc = 0;
 | |
| 	unsigned int duplex_changed = 0;
 | |
| 
 | |
| 	if (duplex_chg_out)
 | |
| 		*duplex_chg_out = 0;
 | |
| 
 | |
| 	mii_data->phy_id &= mii_if->phy_id_mask;
 | |
| 	mii_data->reg_num &= mii_if->reg_num_mask;
 | |
| 
 | |
| 	switch(cmd) {
 | |
| 	case SIOCGMIIPHY:
 | |
| 		mii_data->phy_id = mii_if->phy_id;
 | |
| 		/* fall through */
 | |
| 
 | |
| 	case SIOCGMIIREG:
 | |
| 		mii_data->val_out =
 | |
| 			mii_if->mdio_read(mii_if->dev, mii_data->phy_id,
 | |
| 					  mii_data->reg_num);
 | |
| 		break;
 | |
| 
 | |
| 	case SIOCSMIIREG: {
 | |
| 		u16 val = mii_data->val_in;
 | |
| 
 | |
| 		if (mii_data->phy_id == mii_if->phy_id) {
 | |
| 			switch(mii_data->reg_num) {
 | |
| 			case MII_BMCR: {
 | |
| 				unsigned int new_duplex = 0;
 | |
| 				if (val & (BMCR_RESET|BMCR_ANENABLE))
 | |
| 					mii_if->force_media = 0;
 | |
| 				else
 | |
| 					mii_if->force_media = 1;
 | |
| 				if (mii_if->force_media &&
 | |
| 				    (val & BMCR_FULLDPLX))
 | |
| 					new_duplex = 1;
 | |
| 				if (mii_if->full_duplex != new_duplex) {
 | |
| 					duplex_changed = 1;
 | |
| 					mii_if->full_duplex = new_duplex;
 | |
| 				}
 | |
| 				break;
 | |
| 			}
 | |
| 			case MII_ADVERTISE:
 | |
| 				mii_if->advertising = val;
 | |
| 				break;
 | |
| 			default:
 | |
| 				/* do nothing */
 | |
| 				break;
 | |
| 			}
 | |
| 		}
 | |
| 
 | |
| 		mii_if->mdio_write(mii_if->dev, mii_data->phy_id,
 | |
| 				   mii_data->reg_num, val);
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	default:
 | |
| 		rc = -EOPNOTSUPP;
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	if ((rc == 0) && (duplex_chg_out) && (duplex_changed))
 | |
| 		*duplex_chg_out = 1;
 | |
| 
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| MODULE_AUTHOR ("Jeff Garzik <jgarzik@pobox.com>");
 | |
| MODULE_DESCRIPTION ("MII hardware support library");
 | |
| MODULE_LICENSE("GPL");
 | |
| 
 | |
| EXPORT_SYMBOL(mii_link_ok);
 | |
| EXPORT_SYMBOL(mii_nway_restart);
 | |
| EXPORT_SYMBOL(mii_ethtool_gset);
 | |
| EXPORT_SYMBOL(mii_ethtool_sset);
 | |
| EXPORT_SYMBOL(mii_check_link);
 | |
| EXPORT_SYMBOL(mii_check_media);
 | |
| EXPORT_SYMBOL(mii_check_gmii_support);
 | |
| EXPORT_SYMBOL(generic_mii_ioctl);
 | |
| 
 |