 653954825d
			
		
	
	
	653954825d
	
	
	
		
			
			drivers/net/82596.c: In function 'i596_open': drivers/net/82596.c:1044: warning: label 'err_irq_dev' defined but not used Caused by "82596: free resources on error" Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
		
			
				
	
	
		
			1632 lines
		
	
	
	
		
			41 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			1632 lines
		
	
	
	
		
			41 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
| /* 82596.c: A generic 82596 ethernet driver for linux. */
 | |
| /*
 | |
|    Based on Apricot.c
 | |
|    Written 1994 by Mark Evans.
 | |
|    This driver is for the Apricot 82596 bus-master interface
 | |
| 
 | |
|    Modularised 12/94 Mark Evans
 | |
| 
 | |
| 
 | |
|    Modified to support the 82596 ethernet chips on 680x0 VME boards.
 | |
|    by Richard Hirst <richard@sleepie.demon.co.uk>
 | |
|    Renamed to be 82596.c
 | |
| 
 | |
|    980825:  Changed to receive directly in to sk_buffs which are
 | |
|    allocated at open() time.  Eliminates copy on incoming frames
 | |
|    (small ones are still copied).  Shared data now held in a
 | |
|    non-cached page, so we can run on 68060 in copyback mode.
 | |
| 
 | |
|    TBD:
 | |
|    * look at deferring rx frames rather than discarding (as per tulip)
 | |
|    * handle tx ring full as per tulip
 | |
|    * performance test to tune rx_copybreak
 | |
| 
 | |
|    Most of my modifications relate to the braindead big-endian
 | |
|    implementation by Intel.  When the i596 is operating in
 | |
|    'big-endian' mode, it thinks a 32 bit value of 0x12345678
 | |
|    should be stored as 0x56781234.  This is a real pain, when
 | |
|    you have linked lists which are shared by the 680x0 and the
 | |
|    i596.
 | |
| 
 | |
|    Driver skeleton
 | |
|    Written 1993 by Donald Becker.
 | |
|    Copyright 1993 United States Government as represented by the Director,
 | |
|    National Security Agency. This software may only be used and distributed
 | |
|    according to the terms of the GNU General Public License as modified by SRC,
 | |
|    incorporated herein by reference.
 | |
| 
 | |
|    The author may be reached as becker@scyld.com, or C/O
 | |
|    Scyld Computing Corporation, 410 Severn Ave., Suite 210, Annapolis MD 21403
 | |
| 
 | |
|  */
 | |
| 
 | |
| #include <linux/module.h>
 | |
| #include <linux/kernel.h>
 | |
| #include <linux/string.h>
 | |
| #include <linux/errno.h>
 | |
| #include <linux/ioport.h>
 | |
| #include <linux/interrupt.h>
 | |
| #include <linux/delay.h>
 | |
| #include <linux/netdevice.h>
 | |
| #include <linux/etherdevice.h>
 | |
| #include <linux/skbuff.h>
 | |
| #include <linux/init.h>
 | |
| #include <linux/bitops.h>
 | |
| #include <linux/gfp.h>
 | |
| 
 | |
| #include <asm/io.h>
 | |
| #include <asm/dma.h>
 | |
| #include <asm/pgtable.h>
 | |
| #include <asm/cacheflush.h>
 | |
| 
 | |
| static char version[] __initdata =
 | |
| 	"82596.c $Revision: 1.5 $\n";
 | |
| 
 | |
| #define DRV_NAME	"82596"
 | |
| 
 | |
| /* DEBUG flags
 | |
|  */
 | |
| 
 | |
| #define DEB_INIT	0x0001
 | |
| #define DEB_PROBE	0x0002
 | |
| #define DEB_SERIOUS	0x0004
 | |
| #define DEB_ERRORS	0x0008
 | |
| #define DEB_MULTI	0x0010
 | |
| #define DEB_TDR		0x0020
 | |
| #define DEB_OPEN	0x0040
 | |
| #define DEB_RESET	0x0080
 | |
| #define DEB_ADDCMD	0x0100
 | |
| #define DEB_STATUS	0x0200
 | |
| #define DEB_STARTTX	0x0400
 | |
| #define DEB_RXADDR	0x0800
 | |
| #define DEB_TXADDR	0x1000
 | |
| #define DEB_RXFRAME	0x2000
 | |
| #define DEB_INTS	0x4000
 | |
| #define DEB_STRUCT	0x8000
 | |
| #define DEB_ANY		0xffff
 | |
| 
 | |
| 
 | |
| #define DEB(x,y)	if (i596_debug & (x)) y
 | |
| 
 | |
| 
 | |
| #if defined(CONFIG_MVME16x_NET) || defined(CONFIG_MVME16x_NET_MODULE)
 | |
| #define ENABLE_MVME16x_NET
 | |
| #endif
 | |
| #if defined(CONFIG_BVME6000_NET) || defined(CONFIG_BVME6000_NET_MODULE)
 | |
| #define ENABLE_BVME6000_NET
 | |
| #endif
 | |
| #if defined(CONFIG_APRICOT) || defined(CONFIG_APRICOT_MODULE)
 | |
| #define ENABLE_APRICOT
 | |
| #endif
 | |
| 
 | |
| #ifdef ENABLE_MVME16x_NET
 | |
| #include <asm/mvme16xhw.h>
 | |
| #endif
 | |
| #ifdef ENABLE_BVME6000_NET
 | |
| #include <asm/bvme6000hw.h>
 | |
| #endif
 | |
| 
 | |
| /*
 | |
|  * Define various macros for Channel Attention, word swapping etc., dependent
 | |
|  * on architecture.  MVME and BVME are 680x0 based, otherwise it is Intel.
 | |
|  */
 | |
| 
 | |
| #ifdef __mc68000__
 | |
| #define WSWAPrfd(x)  ((struct i596_rfd *) (((u32)(x)<<16) | ((((u32)(x)))>>16)))
 | |
| #define WSWAPrbd(x)  ((struct i596_rbd *) (((u32)(x)<<16) | ((((u32)(x)))>>16)))
 | |
| #define WSWAPiscp(x) ((struct i596_iscp *)(((u32)(x)<<16) | ((((u32)(x)))>>16)))
 | |
| #define WSWAPscb(x)  ((struct i596_scb *) (((u32)(x)<<16) | ((((u32)(x)))>>16)))
 | |
| #define WSWAPcmd(x)  ((struct i596_cmd *) (((u32)(x)<<16) | ((((u32)(x)))>>16)))
 | |
| #define WSWAPtbd(x)  ((struct i596_tbd *) (((u32)(x)<<16) | ((((u32)(x)))>>16)))
 | |
| #define WSWAPchar(x) ((char *)            (((u32)(x)<<16) | ((((u32)(x)))>>16)))
 | |
| #define ISCP_BUSY	0x00010000
 | |
| #define MACH_IS_APRICOT	0
 | |
| #else
 | |
| #define WSWAPrfd(x)     ((struct i596_rfd *)((long)x))
 | |
| #define WSWAPrbd(x)     ((struct i596_rbd *)((long)x))
 | |
| #define WSWAPiscp(x)    ((struct i596_iscp *)((long)x))
 | |
| #define WSWAPscb(x)     ((struct i596_scb *)((long)x))
 | |
| #define WSWAPcmd(x)     ((struct i596_cmd *)((long)x))
 | |
| #define WSWAPtbd(x)     ((struct i596_tbd *)((long)x))
 | |
| #define WSWAPchar(x)    ((char *)((long)x))
 | |
| #define ISCP_BUSY	0x0001
 | |
| #define MACH_IS_APRICOT	1
 | |
| #endif
 | |
| 
 | |
| /*
 | |
|  * The MPU_PORT command allows direct access to the 82596. With PORT access
 | |
|  * the following commands are available (p5-18). The 32-bit port command
 | |
|  * must be word-swapped with the most significant word written first.
 | |
|  * This only applies to VME boards.
 | |
|  */
 | |
| #define PORT_RESET		0x00	/* reset 82596 */
 | |
| #define PORT_SELFTEST		0x01	/* selftest */
 | |
| #define PORT_ALTSCP		0x02	/* alternate SCB address */
 | |
| #define PORT_ALTDUMP		0x03	/* Alternate DUMP address */
 | |
| 
 | |
| static int i596_debug = (DEB_SERIOUS|DEB_PROBE);
 | |
| 
 | |
| MODULE_AUTHOR("Richard Hirst");
 | |
| MODULE_DESCRIPTION("i82596 driver");
 | |
| MODULE_LICENSE("GPL");
 | |
| 
 | |
| module_param(i596_debug, int, 0);
 | |
| MODULE_PARM_DESC(i596_debug, "i82596 debug mask");
 | |
| 
 | |
| 
 | |
| /* Copy frames shorter than rx_copybreak, otherwise pass on up in
 | |
|  * a full sized sk_buff.  Value of 100 stolen from tulip.c (!alpha).
 | |
|  */
 | |
| static int rx_copybreak = 100;
 | |
| 
 | |
| #define PKT_BUF_SZ	1536
 | |
| #define MAX_MC_CNT	64
 | |
| 
 | |
| #define I596_TOTAL_SIZE 17
 | |
| 
 | |
| #define I596_NULL ((void *)0xffffffff)
 | |
| 
 | |
| #define CMD_EOL		0x8000	/* The last command of the list, stop. */
 | |
| #define CMD_SUSP	0x4000	/* Suspend after doing cmd. */
 | |
| #define CMD_INTR	0x2000	/* Interrupt after doing cmd. */
 | |
| 
 | |
| #define CMD_FLEX	0x0008	/* Enable flexible memory model */
 | |
| 
 | |
| enum commands {
 | |
| 	CmdNOp = 0, CmdSASetup = 1, CmdConfigure = 2, CmdMulticastList = 3,
 | |
| 	CmdTx = 4, CmdTDR = 5, CmdDump = 6, CmdDiagnose = 7
 | |
| };
 | |
| 
 | |
| #define STAT_C		0x8000	/* Set to 0 after execution */
 | |
| #define STAT_B		0x4000	/* Command being executed */
 | |
| #define STAT_OK		0x2000	/* Command executed ok */
 | |
| #define STAT_A		0x1000	/* Command aborted */
 | |
| 
 | |
| #define	 CUC_START	0x0100
 | |
| #define	 CUC_RESUME	0x0200
 | |
| #define	 CUC_SUSPEND    0x0300
 | |
| #define	 CUC_ABORT	0x0400
 | |
| #define	 RX_START	0x0010
 | |
| #define	 RX_RESUME	0x0020
 | |
| #define	 RX_SUSPEND	0x0030
 | |
| #define	 RX_ABORT	0x0040
 | |
| 
 | |
| #define TX_TIMEOUT	5
 | |
| 
 | |
| 
 | |
| struct i596_reg {
 | |
| 	unsigned short porthi;
 | |
| 	unsigned short portlo;
 | |
| 	unsigned long ca;
 | |
| };
 | |
| 
 | |
| #define EOF		0x8000
 | |
| #define SIZE_MASK	0x3fff
 | |
| 
 | |
| struct i596_tbd {
 | |
| 	unsigned short size;
 | |
| 	unsigned short pad;
 | |
| 	struct i596_tbd *next;
 | |
| 	char *data;
 | |
| };
 | |
| 
 | |
| /* The command structure has two 'next' pointers; v_next is the address of
 | |
|  * the next command as seen by the CPU, b_next is the address of the next
 | |
|  * command as seen by the 82596.  The b_next pointer, as used by the 82596
 | |
|  * always references the status field of the next command, rather than the
 | |
|  * v_next field, because the 82596 is unaware of v_next.  It may seem more
 | |
|  * logical to put v_next at the end of the structure, but we cannot do that
 | |
|  * because the 82596 expects other fields to be there, depending on command
 | |
|  * type.
 | |
|  */
 | |
| 
 | |
| struct i596_cmd {
 | |
| 	struct i596_cmd *v_next;	/* Address from CPUs viewpoint */
 | |
| 	unsigned short status;
 | |
| 	unsigned short command;
 | |
| 	struct i596_cmd *b_next;	/* Address from i596 viewpoint */
 | |
| };
 | |
| 
 | |
| struct tx_cmd {
 | |
| 	struct i596_cmd cmd;
 | |
| 	struct i596_tbd *tbd;
 | |
| 	unsigned short size;
 | |
| 	unsigned short pad;
 | |
| 	struct sk_buff *skb;	/* So we can free it after tx */
 | |
| };
 | |
| 
 | |
| struct tdr_cmd {
 | |
| 	struct i596_cmd cmd;
 | |
| 	unsigned short status;
 | |
| 	unsigned short pad;
 | |
| };
 | |
| 
 | |
| struct mc_cmd {
 | |
| 	struct i596_cmd cmd;
 | |
| 	short mc_cnt;
 | |
| 	char mc_addrs[MAX_MC_CNT*6];
 | |
| };
 | |
| 
 | |
| struct sa_cmd {
 | |
| 	struct i596_cmd cmd;
 | |
| 	char eth_addr[8];
 | |
| };
 | |
| 
 | |
| struct cf_cmd {
 | |
| 	struct i596_cmd cmd;
 | |
| 	char i596_config[16];
 | |
| };
 | |
| 
 | |
| struct i596_rfd {
 | |
| 	unsigned short stat;
 | |
| 	unsigned short cmd;
 | |
| 	struct i596_rfd *b_next;	/* Address from i596 viewpoint */
 | |
| 	struct i596_rbd *rbd;
 | |
| 	unsigned short count;
 | |
| 	unsigned short size;
 | |
| 	struct i596_rfd *v_next;	/* Address from CPUs viewpoint */
 | |
| 	struct i596_rfd *v_prev;
 | |
| };
 | |
| 
 | |
| struct i596_rbd {
 | |
|     unsigned short count;
 | |
|     unsigned short zero1;
 | |
|     struct i596_rbd *b_next;
 | |
|     unsigned char *b_data;		/* Address from i596 viewpoint */
 | |
|     unsigned short size;
 | |
|     unsigned short zero2;
 | |
|     struct sk_buff *skb;
 | |
|     struct i596_rbd *v_next;
 | |
|     struct i596_rbd *b_addr;		/* This rbd addr from i596 view */
 | |
|     unsigned char *v_data;		/* Address from CPUs viewpoint */
 | |
| };
 | |
| 
 | |
| #define TX_RING_SIZE 64
 | |
| #define RX_RING_SIZE 16
 | |
| 
 | |
| struct i596_scb {
 | |
| 	unsigned short status;
 | |
| 	unsigned short command;
 | |
| 	struct i596_cmd *cmd;
 | |
| 	struct i596_rfd *rfd;
 | |
| 	unsigned long crc_err;
 | |
| 	unsigned long align_err;
 | |
| 	unsigned long resource_err;
 | |
| 	unsigned long over_err;
 | |
| 	unsigned long rcvdt_err;
 | |
| 	unsigned long short_err;
 | |
| 	unsigned short t_on;
 | |
| 	unsigned short t_off;
 | |
| };
 | |
| 
 | |
| struct i596_iscp {
 | |
| 	unsigned long stat;
 | |
| 	struct i596_scb *scb;
 | |
| };
 | |
| 
 | |
| struct i596_scp {
 | |
| 	unsigned long sysbus;
 | |
| 	unsigned long pad;
 | |
| 	struct i596_iscp *iscp;
 | |
| };
 | |
| 
 | |
| struct i596_private {
 | |
| 	volatile struct i596_scp scp;
 | |
| 	volatile struct i596_iscp iscp;
 | |
| 	volatile struct i596_scb scb;
 | |
| 	struct sa_cmd sa_cmd;
 | |
| 	struct cf_cmd cf_cmd;
 | |
| 	struct tdr_cmd tdr_cmd;
 | |
| 	struct mc_cmd mc_cmd;
 | |
| 	unsigned long stat;
 | |
| 	int last_restart __attribute__((aligned(4)));
 | |
| 	struct i596_rfd *rfd_head;
 | |
| 	struct i596_rbd *rbd_head;
 | |
| 	struct i596_cmd *cmd_tail;
 | |
| 	struct i596_cmd *cmd_head;
 | |
| 	int cmd_backlog;
 | |
| 	unsigned long last_cmd;
 | |
| 	struct i596_rfd rfds[RX_RING_SIZE];
 | |
| 	struct i596_rbd rbds[RX_RING_SIZE];
 | |
| 	struct tx_cmd tx_cmds[TX_RING_SIZE];
 | |
| 	struct i596_tbd tbds[TX_RING_SIZE];
 | |
| 	int next_tx_cmd;
 | |
| 	spinlock_t lock;
 | |
| };
 | |
| 
 | |
| static char init_setup[] =
 | |
| {
 | |
| 	0x8E,			/* length, prefetch on */
 | |
| 	0xC8,			/* fifo to 8, monitor off */
 | |
| #ifdef CONFIG_VME
 | |
| 	0xc0,			/* don't save bad frames */
 | |
| #else
 | |
| 	0x80,			/* don't save bad frames */
 | |
| #endif
 | |
| 	0x2E,			/* No source address insertion, 8 byte preamble */
 | |
| 	0x00,			/* priority and backoff defaults */
 | |
| 	0x60,			/* interframe spacing */
 | |
| 	0x00,			/* slot time LSB */
 | |
| 	0xf2,			/* slot time and retries */
 | |
| 	0x00,			/* promiscuous mode */
 | |
| 	0x00,			/* collision detect */
 | |
| 	0x40,			/* minimum frame length */
 | |
| 	0xff,
 | |
| 	0x00,
 | |
| 	0x7f /*  *multi IA */ };
 | |
| 
 | |
| static int i596_open(struct net_device *dev);
 | |
| static netdev_tx_t i596_start_xmit(struct sk_buff *skb, struct net_device *dev);
 | |
| static irqreturn_t i596_interrupt(int irq, void *dev_id);
 | |
| static int i596_close(struct net_device *dev);
 | |
| static void i596_add_cmd(struct net_device *dev, struct i596_cmd *cmd);
 | |
| static void i596_tx_timeout (struct net_device *dev);
 | |
| static void print_eth(unsigned char *buf, char *str);
 | |
| static void set_multicast_list(struct net_device *dev);
 | |
| 
 | |
| static int rx_ring_size = RX_RING_SIZE;
 | |
| static int ticks_limit = 25;
 | |
| static int max_cmd_backlog = TX_RING_SIZE-1;
 | |
| 
 | |
| 
 | |
| static inline void CA(struct net_device *dev)
 | |
| {
 | |
| #ifdef ENABLE_MVME16x_NET
 | |
| 	if (MACH_IS_MVME16x) {
 | |
| 		((struct i596_reg *) dev->base_addr)->ca = 1;
 | |
| 	}
 | |
| #endif
 | |
| #ifdef ENABLE_BVME6000_NET
 | |
| 	if (MACH_IS_BVME6000) {
 | |
| 		volatile u32 i;
 | |
| 
 | |
| 		i = *(volatile u32 *) (dev->base_addr);
 | |
| 	}
 | |
| #endif
 | |
| #ifdef ENABLE_APRICOT
 | |
| 	if (MACH_IS_APRICOT) {
 | |
| 		outw(0, (short) (dev->base_addr) + 4);
 | |
| 	}
 | |
| #endif
 | |
| }
 | |
| 
 | |
| 
 | |
| static inline void MPU_PORT(struct net_device *dev, int c, volatile void *x)
 | |
| {
 | |
| #ifdef ENABLE_MVME16x_NET
 | |
| 	if (MACH_IS_MVME16x) {
 | |
| 		struct i596_reg *p = (struct i596_reg *) (dev->base_addr);
 | |
| 		p->porthi = ((c) | (u32) (x)) & 0xffff;
 | |
| 		p->portlo = ((c) | (u32) (x)) >> 16;
 | |
| 	}
 | |
| #endif
 | |
| #ifdef ENABLE_BVME6000_NET
 | |
| 	if (MACH_IS_BVME6000) {
 | |
| 		u32 v = (u32) (c) | (u32) (x);
 | |
| 		v = ((u32) (v) << 16) | ((u32) (v) >> 16);
 | |
| 		*(volatile u32 *) dev->base_addr = v;
 | |
| 		udelay(1);
 | |
| 		*(volatile u32 *) dev->base_addr = v;
 | |
| 	}
 | |
| #endif
 | |
| }
 | |
| 
 | |
| 
 | |
| static inline int wait_istat(struct net_device *dev, struct i596_private *lp, int delcnt, char *str)
 | |
| {
 | |
| 	while (--delcnt && lp->iscp.stat)
 | |
| 		udelay(10);
 | |
| 	if (!delcnt) {
 | |
| 		printk(KERN_ERR "%s: %s, status %4.4x, cmd %4.4x.\n",
 | |
| 		     dev->name, str, lp->scb.status, lp->scb.command);
 | |
| 		return -1;
 | |
| 	}
 | |
| 	else
 | |
| 		return 0;
 | |
| }
 | |
| 
 | |
| 
 | |
| static inline int wait_cmd(struct net_device *dev, struct i596_private *lp, int delcnt, char *str)
 | |
| {
 | |
| 	while (--delcnt && lp->scb.command)
 | |
| 		udelay(10);
 | |
| 	if (!delcnt) {
 | |
| 		printk(KERN_ERR "%s: %s, status %4.4x, cmd %4.4x.\n",
 | |
| 		     dev->name, str, lp->scb.status, lp->scb.command);
 | |
| 		return -1;
 | |
| 	}
 | |
| 	else
 | |
| 		return 0;
 | |
| }
 | |
| 
 | |
| 
 | |
| static inline int wait_cfg(struct net_device *dev, struct i596_cmd *cmd, int delcnt, char *str)
 | |
| {
 | |
| 	volatile struct i596_cmd *c = cmd;
 | |
| 
 | |
| 	while (--delcnt && c->command)
 | |
| 		udelay(10);
 | |
| 	if (!delcnt) {
 | |
| 		printk(KERN_ERR "%s: %s.\n", dev->name, str);
 | |
| 		return -1;
 | |
| 	}
 | |
| 	else
 | |
| 		return 0;
 | |
| }
 | |
| 
 | |
| 
 | |
| static void i596_display_data(struct net_device *dev)
 | |
| {
 | |
| 	struct i596_private *lp = dev->ml_priv;
 | |
| 	struct i596_cmd *cmd;
 | |
| 	struct i596_rfd *rfd;
 | |
| 	struct i596_rbd *rbd;
 | |
| 
 | |
| 	printk(KERN_ERR "lp and scp at %p, .sysbus = %08lx, .iscp = %p\n",
 | |
| 	       &lp->scp, lp->scp.sysbus, lp->scp.iscp);
 | |
| 	printk(KERN_ERR "iscp at %p, iscp.stat = %08lx, .scb = %p\n",
 | |
| 	       &lp->iscp, lp->iscp.stat, lp->iscp.scb);
 | |
| 	printk(KERN_ERR "scb at %p, scb.status = %04x, .command = %04x,"
 | |
| 		" .cmd = %p, .rfd = %p\n",
 | |
| 	       &lp->scb, lp->scb.status, lp->scb.command,
 | |
| 		lp->scb.cmd, lp->scb.rfd);
 | |
| 	printk(KERN_ERR "   errors: crc %lx, align %lx, resource %lx,"
 | |
|                " over %lx, rcvdt %lx, short %lx\n",
 | |
| 		lp->scb.crc_err, lp->scb.align_err, lp->scb.resource_err,
 | |
| 		lp->scb.over_err, lp->scb.rcvdt_err, lp->scb.short_err);
 | |
| 	cmd = lp->cmd_head;
 | |
| 	while (cmd != I596_NULL) {
 | |
| 		printk(KERN_ERR "cmd at %p, .status = %04x, .command = %04x, .b_next = %p\n",
 | |
| 		  cmd, cmd->status, cmd->command, cmd->b_next);
 | |
| 		cmd = cmd->v_next;
 | |
| 	}
 | |
| 	rfd = lp->rfd_head;
 | |
| 	printk(KERN_ERR "rfd_head = %p\n", rfd);
 | |
| 	do {
 | |
| 		printk(KERN_ERR "   %p .stat %04x, .cmd %04x, b_next %p, rbd %p,"
 | |
|                         " count %04x\n",
 | |
| 			rfd, rfd->stat, rfd->cmd, rfd->b_next, rfd->rbd,
 | |
| 			rfd->count);
 | |
| 		rfd = rfd->v_next;
 | |
| 	} while (rfd != lp->rfd_head);
 | |
| 	rbd = lp->rbd_head;
 | |
| 	printk(KERN_ERR "rbd_head = %p\n", rbd);
 | |
| 	do {
 | |
| 		printk(KERN_ERR "   %p .count %04x, b_next %p, b_data %p, size %04x\n",
 | |
| 			rbd, rbd->count, rbd->b_next, rbd->b_data, rbd->size);
 | |
| 		rbd = rbd->v_next;
 | |
| 	} while (rbd != lp->rbd_head);
 | |
| }
 | |
| 
 | |
| 
 | |
| #if defined(ENABLE_MVME16x_NET) || defined(ENABLE_BVME6000_NET)
 | |
| static irqreturn_t i596_error(int irq, void *dev_id)
 | |
| {
 | |
| 	struct net_device *dev = dev_id;
 | |
| #ifdef ENABLE_MVME16x_NET
 | |
| 	if (MACH_IS_MVME16x) {
 | |
| 		volatile unsigned char *pcc2 = (unsigned char *) 0xfff42000;
 | |
| 
 | |
| 		pcc2[0x28] = 1;
 | |
| 		pcc2[0x2b] = 0x1d;
 | |
| 	}
 | |
| #endif
 | |
| #ifdef ENABLE_BVME6000_NET
 | |
| 	if (MACH_IS_BVME6000) {
 | |
| 		volatile unsigned char *ethirq = (unsigned char *) BVME_ETHIRQ_REG;
 | |
| 
 | |
| 		*ethirq = 1;
 | |
| 		*ethirq = 3;
 | |
| 	}
 | |
| #endif
 | |
| 	printk(KERN_ERR "%s: Error interrupt\n", dev->name);
 | |
| 	i596_display_data(dev);
 | |
| 	return IRQ_HANDLED;
 | |
| }
 | |
| #endif
 | |
| 
 | |
| static inline void remove_rx_bufs(struct net_device *dev)
 | |
| {
 | |
| 	struct i596_private *lp = dev->ml_priv;
 | |
| 	struct i596_rbd *rbd;
 | |
| 	int i;
 | |
| 
 | |
| 	for (i = 0, rbd = lp->rbds; i < rx_ring_size; i++, rbd++) {
 | |
| 		if (rbd->skb == NULL)
 | |
| 			break;
 | |
| 		dev_kfree_skb(rbd->skb);
 | |
| 		rbd->skb = NULL;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static inline int init_rx_bufs(struct net_device *dev)
 | |
| {
 | |
| 	struct i596_private *lp = dev->ml_priv;
 | |
| 	int i;
 | |
| 	struct i596_rfd *rfd;
 | |
| 	struct i596_rbd *rbd;
 | |
| 
 | |
| 	/* First build the Receive Buffer Descriptor List */
 | |
| 
 | |
| 	for (i = 0, rbd = lp->rbds; i < rx_ring_size; i++, rbd++) {
 | |
| 		struct sk_buff *skb = dev_alloc_skb(PKT_BUF_SZ);
 | |
| 
 | |
| 		if (skb == NULL) {
 | |
| 			remove_rx_bufs(dev);
 | |
| 			return -ENOMEM;
 | |
| 		}
 | |
| 
 | |
| 		skb->dev = dev;
 | |
| 		rbd->v_next = rbd+1;
 | |
| 		rbd->b_next = WSWAPrbd(virt_to_bus(rbd+1));
 | |
| 		rbd->b_addr = WSWAPrbd(virt_to_bus(rbd));
 | |
| 		rbd->skb = skb;
 | |
| 		rbd->v_data = skb->data;
 | |
| 		rbd->b_data = WSWAPchar(virt_to_bus(skb->data));
 | |
| 		rbd->size = PKT_BUF_SZ;
 | |
| #ifdef __mc68000__
 | |
| 		cache_clear(virt_to_phys(skb->data), PKT_BUF_SZ);
 | |
| #endif
 | |
| 	}
 | |
| 	lp->rbd_head = lp->rbds;
 | |
| 	rbd = lp->rbds + rx_ring_size - 1;
 | |
| 	rbd->v_next = lp->rbds;
 | |
| 	rbd->b_next = WSWAPrbd(virt_to_bus(lp->rbds));
 | |
| 
 | |
| 	/* Now build the Receive Frame Descriptor List */
 | |
| 
 | |
| 	for (i = 0, rfd = lp->rfds; i < rx_ring_size; i++, rfd++) {
 | |
| 		rfd->rbd = I596_NULL;
 | |
| 		rfd->v_next = rfd+1;
 | |
| 		rfd->v_prev = rfd-1;
 | |
| 		rfd->b_next = WSWAPrfd(virt_to_bus(rfd+1));
 | |
| 		rfd->cmd = CMD_FLEX;
 | |
| 	}
 | |
| 	lp->rfd_head = lp->rfds;
 | |
| 	lp->scb.rfd = WSWAPrfd(virt_to_bus(lp->rfds));
 | |
| 	rfd = lp->rfds;
 | |
| 	rfd->rbd = lp->rbd_head;
 | |
| 	rfd->v_prev = lp->rfds + rx_ring_size - 1;
 | |
| 	rfd = lp->rfds + rx_ring_size - 1;
 | |
| 	rfd->v_next = lp->rfds;
 | |
| 	rfd->b_next = WSWAPrfd(virt_to_bus(lp->rfds));
 | |
| 	rfd->cmd = CMD_EOL|CMD_FLEX;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| 
 | |
| static void rebuild_rx_bufs(struct net_device *dev)
 | |
| {
 | |
| 	struct i596_private *lp = dev->ml_priv;
 | |
| 	int i;
 | |
| 
 | |
| 	/* Ensure rx frame/buffer descriptors are tidy */
 | |
| 
 | |
| 	for (i = 0; i < rx_ring_size; i++) {
 | |
| 		lp->rfds[i].rbd = I596_NULL;
 | |
| 		lp->rfds[i].cmd = CMD_FLEX;
 | |
| 	}
 | |
| 	lp->rfds[rx_ring_size-1].cmd = CMD_EOL|CMD_FLEX;
 | |
| 	lp->rfd_head = lp->rfds;
 | |
| 	lp->scb.rfd = WSWAPrfd(virt_to_bus(lp->rfds));
 | |
| 	lp->rbd_head = lp->rbds;
 | |
| 	lp->rfds[0].rbd = WSWAPrbd(virt_to_bus(lp->rbds));
 | |
| }
 | |
| 
 | |
| 
 | |
| static int init_i596_mem(struct net_device *dev)
 | |
| {
 | |
| 	struct i596_private *lp = dev->ml_priv;
 | |
| #if !defined(ENABLE_MVME16x_NET) && !defined(ENABLE_BVME6000_NET) || defined(ENABLE_APRICOT)
 | |
| 	short ioaddr = dev->base_addr;
 | |
| #endif
 | |
| 	unsigned long flags;
 | |
| 
 | |
| 	MPU_PORT(dev, PORT_RESET, NULL);
 | |
| 
 | |
| 	udelay(100);		/* Wait 100us - seems to help */
 | |
| 
 | |
| #if defined(ENABLE_MVME16x_NET) || defined(ENABLE_BVME6000_NET)
 | |
| #ifdef ENABLE_MVME16x_NET
 | |
| 	if (MACH_IS_MVME16x) {
 | |
| 		volatile unsigned char *pcc2 = (unsigned char *) 0xfff42000;
 | |
| 
 | |
| 		/* Disable all ints for now */
 | |
| 		pcc2[0x28] = 1;
 | |
| 		pcc2[0x2a] = 0x48;
 | |
| 		/* Following disables snooping.  Snooping is not required
 | |
| 		 * as we make appropriate use of non-cached pages for
 | |
| 		 * shared data, and cache_push/cache_clear.
 | |
| 		 */
 | |
| 		pcc2[0x2b] = 0x08;
 | |
| 	}
 | |
| #endif
 | |
| #ifdef ENABLE_BVME6000_NET
 | |
| 	if (MACH_IS_BVME6000) {
 | |
| 		volatile unsigned char *ethirq = (unsigned char *) BVME_ETHIRQ_REG;
 | |
| 
 | |
| 		*ethirq = 1;
 | |
| 	}
 | |
| #endif
 | |
| 
 | |
| 	/* change the scp address */
 | |
| 
 | |
| 	MPU_PORT(dev, PORT_ALTSCP, (void *)virt_to_bus((void *)&lp->scp));
 | |
| 
 | |
| #elif defined(ENABLE_APRICOT)
 | |
| 
 | |
| 	{
 | |
| 		u32 scp = virt_to_bus(&lp->scp);
 | |
| 
 | |
| 		/* change the scp address */
 | |
| 		outw(0, ioaddr);
 | |
| 		outw(0, ioaddr);
 | |
| 		outb(4, ioaddr + 0xf);
 | |
| 		outw(scp | 2, ioaddr);
 | |
| 		outw(scp >> 16, ioaddr);
 | |
| 	}
 | |
| #endif
 | |
| 
 | |
| 	lp->last_cmd = jiffies;
 | |
| 
 | |
| #ifdef ENABLE_MVME16x_NET
 | |
| 	if (MACH_IS_MVME16x)
 | |
| 		lp->scp.sysbus = 0x00000054;
 | |
| #endif
 | |
| #ifdef ENABLE_BVME6000_NET
 | |
| 	if (MACH_IS_BVME6000)
 | |
| 		lp->scp.sysbus = 0x0000004c;
 | |
| #endif
 | |
| #ifdef ENABLE_APRICOT
 | |
| 	if (MACH_IS_APRICOT)
 | |
| 		lp->scp.sysbus = 0x00440000;
 | |
| #endif
 | |
| 
 | |
| 	lp->scp.iscp = WSWAPiscp(virt_to_bus((void *)&lp->iscp));
 | |
| 	lp->iscp.scb = WSWAPscb(virt_to_bus((void *)&lp->scb));
 | |
| 	lp->iscp.stat = ISCP_BUSY;
 | |
| 	lp->cmd_backlog = 0;
 | |
| 
 | |
| 	lp->cmd_head = lp->scb.cmd = I596_NULL;
 | |
| 
 | |
| #ifdef ENABLE_BVME6000_NET
 | |
| 	if (MACH_IS_BVME6000) {
 | |
| 		lp->scb.t_on  = 7 * 25;
 | |
| 		lp->scb.t_off = 1 * 25;
 | |
| 	}
 | |
| #endif
 | |
| 
 | |
| 	DEB(DEB_INIT,printk(KERN_DEBUG "%s: starting i82596.\n", dev->name));
 | |
| 
 | |
| #if defined(ENABLE_APRICOT)
 | |
| 	(void) inb(ioaddr + 0x10);
 | |
| 	outb(4, ioaddr + 0xf);
 | |
| #endif
 | |
| 	CA(dev);
 | |
| 
 | |
| 	if (wait_istat(dev,lp,1000,"initialization timed out"))
 | |
| 		goto failed;
 | |
| 	DEB(DEB_INIT,printk(KERN_DEBUG "%s: i82596 initialization successful\n", dev->name));
 | |
| 
 | |
| 	/* Ensure rx frame/buffer descriptors are tidy */
 | |
| 	rebuild_rx_bufs(dev);
 | |
| 	lp->scb.command = 0;
 | |
| 
 | |
| #ifdef ENABLE_MVME16x_NET
 | |
| 	if (MACH_IS_MVME16x) {
 | |
| 		volatile unsigned char *pcc2 = (unsigned char *) 0xfff42000;
 | |
| 
 | |
| 		/* Enable ints, etc. now */
 | |
| 		pcc2[0x2a] = 0x55;	/* Edge sensitive */
 | |
| 		pcc2[0x2b] = 0x15;
 | |
| 	}
 | |
| #endif
 | |
| #ifdef ENABLE_BVME6000_NET
 | |
| 	if (MACH_IS_BVME6000) {
 | |
| 		volatile unsigned char *ethirq = (unsigned char *) BVME_ETHIRQ_REG;
 | |
| 
 | |
| 		*ethirq = 3;
 | |
| 	}
 | |
| #endif
 | |
| 
 | |
| 
 | |
| 	DEB(DEB_INIT,printk(KERN_DEBUG "%s: queuing CmdConfigure\n", dev->name));
 | |
| 	memcpy(lp->cf_cmd.i596_config, init_setup, 14);
 | |
| 	lp->cf_cmd.cmd.command = CmdConfigure;
 | |
| 	i596_add_cmd(dev, &lp->cf_cmd.cmd);
 | |
| 
 | |
| 	DEB(DEB_INIT,printk(KERN_DEBUG "%s: queuing CmdSASetup\n", dev->name));
 | |
| 	memcpy(lp->sa_cmd.eth_addr, dev->dev_addr, 6);
 | |
| 	lp->sa_cmd.cmd.command = CmdSASetup;
 | |
| 	i596_add_cmd(dev, &lp->sa_cmd.cmd);
 | |
| 
 | |
| 	DEB(DEB_INIT,printk(KERN_DEBUG "%s: queuing CmdTDR\n", dev->name));
 | |
| 	lp->tdr_cmd.cmd.command = CmdTDR;
 | |
| 	i596_add_cmd(dev, &lp->tdr_cmd.cmd);
 | |
| 
 | |
| 	spin_lock_irqsave (&lp->lock, flags);
 | |
| 
 | |
| 	if (wait_cmd(dev,lp,1000,"timed out waiting to issue RX_START")) {
 | |
| 		spin_unlock_irqrestore (&lp->lock, flags);
 | |
| 		goto failed;
 | |
| 	}
 | |
| 	DEB(DEB_INIT,printk(KERN_DEBUG "%s: Issuing RX_START\n", dev->name));
 | |
| 	lp->scb.command = RX_START;
 | |
| 	CA(dev);
 | |
| 
 | |
| 	spin_unlock_irqrestore (&lp->lock, flags);
 | |
| 
 | |
| 	if (wait_cmd(dev,lp,1000,"RX_START not processed"))
 | |
| 		goto failed;
 | |
| 	DEB(DEB_INIT,printk(KERN_DEBUG "%s: Receive unit started OK\n", dev->name));
 | |
| 	return 0;
 | |
| 
 | |
| failed:
 | |
| 	printk(KERN_CRIT "%s: Failed to initialise 82596\n", dev->name);
 | |
| 	MPU_PORT(dev, PORT_RESET, NULL);
 | |
| 	return -1;
 | |
| }
 | |
| 
 | |
| static inline int i596_rx(struct net_device *dev)
 | |
| {
 | |
| 	struct i596_private *lp = dev->ml_priv;
 | |
| 	struct i596_rfd *rfd;
 | |
| 	struct i596_rbd *rbd;
 | |
| 	int frames = 0;
 | |
| 
 | |
| 	DEB(DEB_RXFRAME,printk(KERN_DEBUG "i596_rx(), rfd_head %p, rbd_head %p\n",
 | |
| 			lp->rfd_head, lp->rbd_head));
 | |
| 
 | |
| 	rfd = lp->rfd_head;		/* Ref next frame to check */
 | |
| 
 | |
| 	while ((rfd->stat) & STAT_C) {	/* Loop while complete frames */
 | |
| 		if (rfd->rbd == I596_NULL)
 | |
| 			rbd = I596_NULL;
 | |
| 		else if (rfd->rbd == lp->rbd_head->b_addr)
 | |
| 			rbd = lp->rbd_head;
 | |
| 		else {
 | |
| 			printk(KERN_CRIT "%s: rbd chain broken!\n", dev->name);
 | |
| 			/* XXX Now what? */
 | |
| 			rbd = I596_NULL;
 | |
| 		}
 | |
| 		DEB(DEB_RXFRAME, printk(KERN_DEBUG "  rfd %p, rfd.rbd %p, rfd.stat %04x\n",
 | |
| 			rfd, rfd->rbd, rfd->stat));
 | |
| 
 | |
| 		if (rbd != I596_NULL && ((rfd->stat) & STAT_OK)) {
 | |
| 			/* a good frame */
 | |
| 			int pkt_len = rbd->count & 0x3fff;
 | |
| 			struct sk_buff *skb = rbd->skb;
 | |
| 			int rx_in_place = 0;
 | |
| 
 | |
| 			DEB(DEB_RXADDR,print_eth(rbd->v_data, "received"));
 | |
| 			frames++;
 | |
| 
 | |
| 			/* Check if the packet is long enough to just accept
 | |
| 			 * without copying to a properly sized skbuff.
 | |
| 			 */
 | |
| 
 | |
| 			if (pkt_len > rx_copybreak) {
 | |
| 				struct sk_buff *newskb;
 | |
| 
 | |
| 				/* Get fresh skbuff to replace filled one. */
 | |
| 				newskb = dev_alloc_skb(PKT_BUF_SZ);
 | |
| 				if (newskb == NULL) {
 | |
| 					skb = NULL;	/* drop pkt */
 | |
| 					goto memory_squeeze;
 | |
| 				}
 | |
| 				/* Pass up the skb already on the Rx ring. */
 | |
| 				skb_put(skb, pkt_len);
 | |
| 				rx_in_place = 1;
 | |
| 				rbd->skb = newskb;
 | |
| 				newskb->dev = dev;
 | |
| 				rbd->v_data = newskb->data;
 | |
| 				rbd->b_data = WSWAPchar(virt_to_bus(newskb->data));
 | |
| #ifdef __mc68000__
 | |
| 				cache_clear(virt_to_phys(newskb->data), PKT_BUF_SZ);
 | |
| #endif
 | |
| 			}
 | |
| 			else
 | |
| 				skb = dev_alloc_skb(pkt_len + 2);
 | |
| memory_squeeze:
 | |
| 			if (skb == NULL) {
 | |
| 				/* XXX tulip.c can defer packets here!! */
 | |
| 				printk(KERN_WARNING "%s: i596_rx Memory squeeze, dropping packet.\n", dev->name);
 | |
| 				dev->stats.rx_dropped++;
 | |
| 			}
 | |
| 			else {
 | |
| 				if (!rx_in_place) {
 | |
| 					/* 16 byte align the data fields */
 | |
| 					skb_reserve(skb, 2);
 | |
| 					memcpy(skb_put(skb,pkt_len), rbd->v_data, pkt_len);
 | |
| 				}
 | |
| 				skb->protocol=eth_type_trans(skb,dev);
 | |
| 				skb->len = pkt_len;
 | |
| #ifdef __mc68000__
 | |
| 				cache_clear(virt_to_phys(rbd->skb->data),
 | |
| 						pkt_len);
 | |
| #endif
 | |
| 				netif_rx(skb);
 | |
| 				dev->stats.rx_packets++;
 | |
| 				dev->stats.rx_bytes+=pkt_len;
 | |
| 			}
 | |
| 		}
 | |
| 		else {
 | |
| 			DEB(DEB_ERRORS, printk(KERN_DEBUG "%s: Error, rfd.stat = 0x%04x\n",
 | |
| 					dev->name, rfd->stat));
 | |
| 			dev->stats.rx_errors++;
 | |
| 			if ((rfd->stat) & 0x0001)
 | |
| 				dev->stats.collisions++;
 | |
| 			if ((rfd->stat) & 0x0080)
 | |
| 				dev->stats.rx_length_errors++;
 | |
| 			if ((rfd->stat) & 0x0100)
 | |
| 				dev->stats.rx_over_errors++;
 | |
| 			if ((rfd->stat) & 0x0200)
 | |
| 				dev->stats.rx_fifo_errors++;
 | |
| 			if ((rfd->stat) & 0x0400)
 | |
| 				dev->stats.rx_frame_errors++;
 | |
| 			if ((rfd->stat) & 0x0800)
 | |
| 				dev->stats.rx_crc_errors++;
 | |
| 			if ((rfd->stat) & 0x1000)
 | |
| 				dev->stats.rx_length_errors++;
 | |
| 		}
 | |
| 
 | |
| 		/* Clear the buffer descriptor count and EOF + F flags */
 | |
| 
 | |
| 		if (rbd != I596_NULL && (rbd->count & 0x4000)) {
 | |
| 			rbd->count = 0;
 | |
| 			lp->rbd_head = rbd->v_next;
 | |
| 		}
 | |
| 
 | |
| 		/* Tidy the frame descriptor, marking it as end of list */
 | |
| 
 | |
| 		rfd->rbd = I596_NULL;
 | |
| 		rfd->stat = 0;
 | |
| 		rfd->cmd = CMD_EOL|CMD_FLEX;
 | |
| 		rfd->count = 0;
 | |
| 
 | |
| 		/* Remove end-of-list from old end descriptor */
 | |
| 
 | |
| 		rfd->v_prev->cmd = CMD_FLEX;
 | |
| 
 | |
| 		/* Update record of next frame descriptor to process */
 | |
| 
 | |
| 		lp->scb.rfd = rfd->b_next;
 | |
| 		lp->rfd_head = rfd->v_next;
 | |
| 		rfd = lp->rfd_head;
 | |
| 	}
 | |
| 
 | |
| 	DEB(DEB_RXFRAME,printk(KERN_DEBUG "frames %d\n", frames));
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| 
 | |
| static void i596_cleanup_cmd(struct net_device *dev, struct i596_private *lp)
 | |
| {
 | |
| 	struct i596_cmd *ptr;
 | |
| 
 | |
| 	while (lp->cmd_head != I596_NULL) {
 | |
| 		ptr = lp->cmd_head;
 | |
| 		lp->cmd_head = ptr->v_next;
 | |
| 		lp->cmd_backlog--;
 | |
| 
 | |
| 		switch ((ptr->command) & 0x7) {
 | |
| 		case CmdTx:
 | |
| 			{
 | |
| 				struct tx_cmd *tx_cmd = (struct tx_cmd *) ptr;
 | |
| 				struct sk_buff *skb = tx_cmd->skb;
 | |
| 
 | |
| 				dev_kfree_skb(skb);
 | |
| 
 | |
| 				dev->stats.tx_errors++;
 | |
| 				dev->stats.tx_aborted_errors++;
 | |
| 
 | |
| 				ptr->v_next = ptr->b_next = I596_NULL;
 | |
| 				tx_cmd->cmd.command = 0;  /* Mark as free */
 | |
| 				break;
 | |
| 			}
 | |
| 		default:
 | |
| 			ptr->v_next = ptr->b_next = I596_NULL;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	wait_cmd(dev,lp,100,"i596_cleanup_cmd timed out");
 | |
| 	lp->scb.cmd = I596_NULL;
 | |
| }
 | |
| 
 | |
| static void i596_reset(struct net_device *dev, struct i596_private *lp,
 | |
| 			int ioaddr)
 | |
| {
 | |
| 	unsigned long flags;
 | |
| 
 | |
| 	DEB(DEB_RESET,printk(KERN_DEBUG "i596_reset\n"));
 | |
| 
 | |
| 	spin_lock_irqsave (&lp->lock, flags);
 | |
| 
 | |
| 	wait_cmd(dev,lp,100,"i596_reset timed out");
 | |
| 
 | |
| 	netif_stop_queue(dev);
 | |
| 
 | |
| 	lp->scb.command = CUC_ABORT | RX_ABORT;
 | |
| 	CA(dev);
 | |
| 
 | |
| 	/* wait for shutdown */
 | |
| 	wait_cmd(dev,lp,1000,"i596_reset 2 timed out");
 | |
| 	spin_unlock_irqrestore (&lp->lock, flags);
 | |
| 
 | |
| 	i596_cleanup_cmd(dev,lp);
 | |
| 	i596_rx(dev);
 | |
| 
 | |
| 	netif_start_queue(dev);
 | |
| 	init_i596_mem(dev);
 | |
| }
 | |
| 
 | |
| static void i596_add_cmd(struct net_device *dev, struct i596_cmd *cmd)
 | |
| {
 | |
| 	struct i596_private *lp = dev->ml_priv;
 | |
| 	int ioaddr = dev->base_addr;
 | |
| 	unsigned long flags;
 | |
| 
 | |
| 	DEB(DEB_ADDCMD,printk(KERN_DEBUG "i596_add_cmd\n"));
 | |
| 
 | |
| 	cmd->status = 0;
 | |
| 	cmd->command |= (CMD_EOL | CMD_INTR);
 | |
| 	cmd->v_next = cmd->b_next = I596_NULL;
 | |
| 
 | |
| 	spin_lock_irqsave (&lp->lock, flags);
 | |
| 
 | |
| 	if (lp->cmd_head != I596_NULL) {
 | |
| 		lp->cmd_tail->v_next = cmd;
 | |
| 		lp->cmd_tail->b_next = WSWAPcmd(virt_to_bus(&cmd->status));
 | |
| 	} else {
 | |
| 		lp->cmd_head = cmd;
 | |
| 		wait_cmd(dev,lp,100,"i596_add_cmd timed out");
 | |
| 		lp->scb.cmd = WSWAPcmd(virt_to_bus(&cmd->status));
 | |
| 		lp->scb.command = CUC_START;
 | |
| 		CA(dev);
 | |
| 	}
 | |
| 	lp->cmd_tail = cmd;
 | |
| 	lp->cmd_backlog++;
 | |
| 
 | |
| 	spin_unlock_irqrestore (&lp->lock, flags);
 | |
| 
 | |
| 	if (lp->cmd_backlog > max_cmd_backlog) {
 | |
| 		unsigned long tickssofar = jiffies - lp->last_cmd;
 | |
| 
 | |
| 		if (tickssofar < ticks_limit)
 | |
| 			return;
 | |
| 
 | |
| 		printk(KERN_NOTICE "%s: command unit timed out, status resetting.\n", dev->name);
 | |
| 
 | |
| 		i596_reset(dev, lp, ioaddr);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static int i596_open(struct net_device *dev)
 | |
| {
 | |
| 	int res = 0;
 | |
| 
 | |
| 	DEB(DEB_OPEN,printk(KERN_DEBUG "%s: i596_open() irq %d.\n", dev->name, dev->irq));
 | |
| 
 | |
| 	if (request_irq(dev->irq, i596_interrupt, 0, "i82596", dev)) {
 | |
| 		printk(KERN_ERR "%s: IRQ %d not free\n", dev->name, dev->irq);
 | |
| 		return -EAGAIN;
 | |
| 	}
 | |
| #ifdef ENABLE_MVME16x_NET
 | |
| 	if (MACH_IS_MVME16x) {
 | |
| 		if (request_irq(0x56, i596_error, 0, "i82596_error", dev)) {
 | |
| 			res = -EAGAIN;
 | |
| 			goto err_irq_dev;
 | |
| 		}
 | |
| 	}
 | |
| #endif
 | |
| 	res = init_rx_bufs(dev);
 | |
| 	if (res)
 | |
| 		goto err_irq_56;
 | |
| 
 | |
| 	netif_start_queue(dev);
 | |
| 
 | |
| 	if (init_i596_mem(dev)) {
 | |
| 		res = -EAGAIN;
 | |
| 		goto err_queue;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| err_queue:
 | |
| 	netif_stop_queue(dev);
 | |
| 	remove_rx_bufs(dev);
 | |
| err_irq_56:
 | |
| #ifdef ENABLE_MVME16x_NET
 | |
| 	free_irq(0x56, dev);
 | |
| err_irq_dev:
 | |
| #endif
 | |
| 	free_irq(dev->irq, dev);
 | |
| 
 | |
| 	return res;
 | |
| }
 | |
| 
 | |
| static void i596_tx_timeout (struct net_device *dev)
 | |
| {
 | |
| 	struct i596_private *lp = dev->ml_priv;
 | |
| 	int ioaddr = dev->base_addr;
 | |
| 
 | |
| 	/* Transmitter timeout, serious problems. */
 | |
| 	DEB(DEB_ERRORS,printk(KERN_ERR "%s: transmit timed out, status resetting.\n",
 | |
| 			dev->name));
 | |
| 
 | |
| 	dev->stats.tx_errors++;
 | |
| 
 | |
| 	/* Try to restart the adaptor */
 | |
| 	if (lp->last_restart == dev->stats.tx_packets) {
 | |
| 		DEB(DEB_ERRORS,printk(KERN_ERR "Resetting board.\n"));
 | |
| 		/* Shutdown and restart */
 | |
| 		i596_reset (dev, lp, ioaddr);
 | |
| 	} else {
 | |
| 		/* Issue a channel attention signal */
 | |
| 		DEB(DEB_ERRORS,printk(KERN_ERR "Kicking board.\n"));
 | |
| 		lp->scb.command = CUC_START | RX_START;
 | |
| 		CA (dev);
 | |
| 		lp->last_restart = dev->stats.tx_packets;
 | |
| 	}
 | |
| 
 | |
| 	dev->trans_start = jiffies; /* prevent tx timeout */
 | |
| 	netif_wake_queue (dev);
 | |
| }
 | |
| 
 | |
| static netdev_tx_t i596_start_xmit(struct sk_buff *skb, struct net_device *dev)
 | |
| {
 | |
| 	struct i596_private *lp = dev->ml_priv;
 | |
| 	struct tx_cmd *tx_cmd;
 | |
| 	struct i596_tbd *tbd;
 | |
| 	short length = skb->len;
 | |
| 
 | |
| 	DEB(DEB_STARTTX,printk(KERN_DEBUG "%s: i596_start_xmit(%x,%p) called\n",
 | |
| 				dev->name, skb->len, skb->data));
 | |
| 
 | |
| 	if (skb->len < ETH_ZLEN) {
 | |
| 		if (skb_padto(skb, ETH_ZLEN))
 | |
| 			return NETDEV_TX_OK;
 | |
| 		length = ETH_ZLEN;
 | |
| 	}
 | |
| 	netif_stop_queue(dev);
 | |
| 
 | |
| 	tx_cmd = lp->tx_cmds + lp->next_tx_cmd;
 | |
| 	tbd = lp->tbds + lp->next_tx_cmd;
 | |
| 
 | |
| 	if (tx_cmd->cmd.command) {
 | |
| 		printk(KERN_NOTICE "%s: xmit ring full, dropping packet.\n",
 | |
| 				dev->name);
 | |
| 		dev->stats.tx_dropped++;
 | |
| 
 | |
| 		dev_kfree_skb(skb);
 | |
| 	} else {
 | |
| 		if (++lp->next_tx_cmd == TX_RING_SIZE)
 | |
| 			lp->next_tx_cmd = 0;
 | |
| 		tx_cmd->tbd = WSWAPtbd(virt_to_bus(tbd));
 | |
| 		tbd->next = I596_NULL;
 | |
| 
 | |
| 		tx_cmd->cmd.command = CMD_FLEX | CmdTx;
 | |
| 		tx_cmd->skb = skb;
 | |
| 
 | |
| 		tx_cmd->pad = 0;
 | |
| 		tx_cmd->size = 0;
 | |
| 		tbd->pad = 0;
 | |
| 		tbd->size = EOF | length;
 | |
| 
 | |
| 		tbd->data = WSWAPchar(virt_to_bus(skb->data));
 | |
| 
 | |
| #ifdef __mc68000__
 | |
| 		cache_push(virt_to_phys(skb->data), length);
 | |
| #endif
 | |
| 		DEB(DEB_TXADDR,print_eth(skb->data, "tx-queued"));
 | |
| 		i596_add_cmd(dev, &tx_cmd->cmd);
 | |
| 
 | |
| 		dev->stats.tx_packets++;
 | |
| 		dev->stats.tx_bytes += length;
 | |
| 	}
 | |
| 
 | |
| 	netif_start_queue(dev);
 | |
| 
 | |
| 	return NETDEV_TX_OK;
 | |
| }
 | |
| 
 | |
| static void print_eth(unsigned char *add, char *str)
 | |
| {
 | |
| 	printk(KERN_DEBUG "i596 0x%p, %pM --> %pM %02X%02X, %s\n",
 | |
| 	       add, add + 6, add, add[12], add[13], str);
 | |
| }
 | |
| 
 | |
| static int io = 0x300;
 | |
| static int irq = 10;
 | |
| 
 | |
| static const struct net_device_ops i596_netdev_ops = {
 | |
| 	.ndo_open 		= i596_open,
 | |
| 	.ndo_stop		= i596_close,
 | |
| 	.ndo_start_xmit		= i596_start_xmit,
 | |
| 	.ndo_set_multicast_list = set_multicast_list,
 | |
| 	.ndo_tx_timeout		= i596_tx_timeout,
 | |
| 	.ndo_change_mtu		= eth_change_mtu,
 | |
| 	.ndo_set_mac_address 	= eth_mac_addr,
 | |
| 	.ndo_validate_addr	= eth_validate_addr,
 | |
| };
 | |
| 
 | |
| struct net_device * __init i82596_probe(int unit)
 | |
| {
 | |
| 	struct net_device *dev;
 | |
| 	int i;
 | |
| 	struct i596_private *lp;
 | |
| 	char eth_addr[8];
 | |
| 	static int probed;
 | |
| 	int err;
 | |
| 
 | |
| 	if (probed)
 | |
| 		return ERR_PTR(-ENODEV);
 | |
| 	probed++;
 | |
| 
 | |
| 	dev = alloc_etherdev(0);
 | |
| 	if (!dev)
 | |
| 		return ERR_PTR(-ENOMEM);
 | |
| 
 | |
| 	if (unit >= 0) {
 | |
| 		sprintf(dev->name, "eth%d", unit);
 | |
| 		netdev_boot_setup_check(dev);
 | |
| 	} else {
 | |
| 		dev->base_addr = io;
 | |
| 		dev->irq = irq;
 | |
| 	}
 | |
| 
 | |
| #ifdef ENABLE_MVME16x_NET
 | |
| 	if (MACH_IS_MVME16x) {
 | |
| 		if (mvme16x_config & MVME16x_CONFIG_NO_ETHERNET) {
 | |
| 			printk(KERN_NOTICE "Ethernet probe disabled - chip not present\n");
 | |
| 			err = -ENODEV;
 | |
| 			goto out;
 | |
| 		}
 | |
| 		memcpy(eth_addr, (void *) 0xfffc1f2c, 6);	/* YUCK! Get addr from NOVRAM */
 | |
| 		dev->base_addr = MVME_I596_BASE;
 | |
| 		dev->irq = (unsigned) MVME16x_IRQ_I596;
 | |
| 		goto found;
 | |
| 	}
 | |
| #endif
 | |
| #ifdef ENABLE_BVME6000_NET
 | |
| 	if (MACH_IS_BVME6000) {
 | |
| 		volatile unsigned char *rtc = (unsigned char *) BVME_RTC_BASE;
 | |
| 		unsigned char msr = rtc[3];
 | |
| 		int i;
 | |
| 
 | |
| 		rtc[3] |= 0x80;
 | |
| 		for (i = 0; i < 6; i++)
 | |
| 			eth_addr[i] = rtc[i * 4 + 7];	/* Stored in RTC RAM at offset 1 */
 | |
| 		rtc[3] = msr;
 | |
| 		dev->base_addr = BVME_I596_BASE;
 | |
| 		dev->irq = (unsigned) BVME_IRQ_I596;
 | |
| 		goto found;
 | |
| 	}
 | |
| #endif
 | |
| #ifdef ENABLE_APRICOT
 | |
| 	{
 | |
| 		int checksum = 0;
 | |
| 		int ioaddr = 0x300;
 | |
| 
 | |
| 		/* this is easy the ethernet interface can only be at 0x300 */
 | |
| 		/* first check nothing is already registered here */
 | |
| 
 | |
| 		if (!request_region(ioaddr, I596_TOTAL_SIZE, DRV_NAME)) {
 | |
| 			printk(KERN_ERR "82596: IO address 0x%04x in use\n", ioaddr);
 | |
| 			err = -EBUSY;
 | |
| 			goto out;
 | |
| 		}
 | |
| 
 | |
| 		dev->base_addr = ioaddr;
 | |
| 
 | |
| 		for (i = 0; i < 8; i++) {
 | |
| 			eth_addr[i] = inb(ioaddr + 8 + i);
 | |
| 			checksum += eth_addr[i];
 | |
| 		}
 | |
| 
 | |
| 		/* checksum is a multiple of 0x100, got this wrong first time
 | |
| 		   some machines have 0x100, some 0x200. The DOS driver doesn't
 | |
| 		   even bother with the checksum.
 | |
| 		   Some other boards trip the checksum.. but then appear as
 | |
| 		   ether address 0. Trap these - AC */
 | |
| 
 | |
| 		if ((checksum % 0x100) ||
 | |
| 		    (memcmp(eth_addr, "\x00\x00\x49", 3) != 0)) {
 | |
| 			err = -ENODEV;
 | |
| 			goto out1;
 | |
| 		}
 | |
| 
 | |
| 		dev->irq = 10;
 | |
| 		goto found;
 | |
| 	}
 | |
| #endif
 | |
| 	err = -ENODEV;
 | |
| 	goto out;
 | |
| 
 | |
| found:
 | |
| 	dev->mem_start = (int)__get_free_pages(GFP_ATOMIC, 0);
 | |
| 	if (!dev->mem_start) {
 | |
| 		err = -ENOMEM;
 | |
| 		goto out1;
 | |
| 	}
 | |
| 
 | |
| 	DEB(DEB_PROBE,printk(KERN_INFO "%s: 82596 at %#3lx,", dev->name, dev->base_addr));
 | |
| 
 | |
| 	for (i = 0; i < 6; i++)
 | |
| 		DEB(DEB_PROBE,printk(" %2.2X", dev->dev_addr[i] = eth_addr[i]));
 | |
| 
 | |
| 	DEB(DEB_PROBE,printk(" IRQ %d.\n", dev->irq));
 | |
| 
 | |
| 	DEB(DEB_PROBE,printk(KERN_INFO "%s", version));
 | |
| 
 | |
| 	/* The 82596-specific entries in the device structure. */
 | |
| 	dev->netdev_ops = &i596_netdev_ops;
 | |
| 	dev->watchdog_timeo = TX_TIMEOUT;
 | |
| 
 | |
| 	dev->ml_priv = (void *)(dev->mem_start);
 | |
| 
 | |
| 	lp = dev->ml_priv;
 | |
| 	DEB(DEB_INIT,printk(KERN_DEBUG "%s: lp at 0x%08lx (%zd bytes), "
 | |
| 			"lp->scb at 0x%08lx\n",
 | |
| 			dev->name, (unsigned long)lp,
 | |
| 			sizeof(struct i596_private), (unsigned long)&lp->scb));
 | |
| 	memset((void *) lp, 0, sizeof(struct i596_private));
 | |
| 
 | |
| #ifdef __mc68000__
 | |
| 	cache_push(virt_to_phys((void *)(dev->mem_start)), 4096);
 | |
| 	cache_clear(virt_to_phys((void *)(dev->mem_start)), 4096);
 | |
| 	kernel_set_cachemode((void *)(dev->mem_start), 4096, IOMAP_NOCACHE_SER);
 | |
| #endif
 | |
| 	lp->scb.command = 0;
 | |
| 	lp->scb.cmd = I596_NULL;
 | |
| 	lp->scb.rfd = I596_NULL;
 | |
| 	spin_lock_init(&lp->lock);
 | |
| 
 | |
| 	err = register_netdev(dev);
 | |
| 	if (err)
 | |
| 		goto out2;
 | |
| 	return dev;
 | |
| out2:
 | |
| #ifdef __mc68000__
 | |
| 	/* XXX This assumes default cache mode to be IOMAP_FULL_CACHING,
 | |
| 	 * XXX which may be invalid (CONFIG_060_WRITETHROUGH)
 | |
| 	 */
 | |
| 	kernel_set_cachemode((void *)(dev->mem_start), 4096,
 | |
| 			IOMAP_FULL_CACHING);
 | |
| #endif
 | |
| 	free_page ((u32)(dev->mem_start));
 | |
| out1:
 | |
| #ifdef ENABLE_APRICOT
 | |
| 	release_region(dev->base_addr, I596_TOTAL_SIZE);
 | |
| #endif
 | |
| out:
 | |
| 	free_netdev(dev);
 | |
| 	return ERR_PTR(err);
 | |
| }
 | |
| 
 | |
| static irqreturn_t i596_interrupt(int irq, void *dev_id)
 | |
| {
 | |
| 	struct net_device *dev = dev_id;
 | |
| 	struct i596_private *lp;
 | |
| 	short ioaddr;
 | |
| 	unsigned short status, ack_cmd = 0;
 | |
| 	int handled = 0;
 | |
| 
 | |
| #ifdef ENABLE_BVME6000_NET
 | |
| 	if (MACH_IS_BVME6000) {
 | |
| 		if (*(char *) BVME_LOCAL_IRQ_STAT & BVME_ETHERR) {
 | |
| 			i596_error(irq, dev_id);
 | |
| 			return IRQ_HANDLED;
 | |
| 		}
 | |
| 	}
 | |
| #endif
 | |
| 	if (dev == NULL) {
 | |
| 		printk(KERN_ERR "i596_interrupt(): irq %d for unknown device.\n", irq);
 | |
| 		return IRQ_NONE;
 | |
| 	}
 | |
| 
 | |
| 	ioaddr = dev->base_addr;
 | |
| 	lp = dev->ml_priv;
 | |
| 
 | |
| 	spin_lock (&lp->lock);
 | |
| 
 | |
| 	wait_cmd(dev,lp,100,"i596 interrupt, timeout");
 | |
| 	status = lp->scb.status;
 | |
| 
 | |
| 	DEB(DEB_INTS,printk(KERN_DEBUG "%s: i596 interrupt, IRQ %d, status %4.4x.\n",
 | |
| 			dev->name, irq, status));
 | |
| 
 | |
| 	ack_cmd = status & 0xf000;
 | |
| 
 | |
| 	if ((status & 0x8000) || (status & 0x2000)) {
 | |
| 		struct i596_cmd *ptr;
 | |
| 
 | |
| 		handled = 1;
 | |
| 		if ((status & 0x8000))
 | |
| 			DEB(DEB_INTS,printk(KERN_DEBUG "%s: i596 interrupt completed command.\n", dev->name));
 | |
| 		if ((status & 0x2000))
 | |
| 			DEB(DEB_INTS,printk(KERN_DEBUG "%s: i596 interrupt command unit inactive %x.\n", dev->name, status & 0x0700));
 | |
| 
 | |
| 		while ((lp->cmd_head != I596_NULL) && (lp->cmd_head->status & STAT_C)) {
 | |
| 			ptr = lp->cmd_head;
 | |
| 
 | |
| 			DEB(DEB_STATUS,printk(KERN_DEBUG "cmd_head->status = %04x, ->command = %04x\n",
 | |
| 				       lp->cmd_head->status, lp->cmd_head->command));
 | |
| 			lp->cmd_head = ptr->v_next;
 | |
| 			lp->cmd_backlog--;
 | |
| 
 | |
| 			switch ((ptr->command) & 0x7) {
 | |
| 			case CmdTx:
 | |
| 			    {
 | |
| 				struct tx_cmd *tx_cmd = (struct tx_cmd *) ptr;
 | |
| 				struct sk_buff *skb = tx_cmd->skb;
 | |
| 
 | |
| 				if ((ptr->status) & STAT_OK) {
 | |
| 					DEB(DEB_TXADDR,print_eth(skb->data, "tx-done"));
 | |
| 				} else {
 | |
| 					dev->stats.tx_errors++;
 | |
| 					if ((ptr->status) & 0x0020)
 | |
| 						dev->stats.collisions++;
 | |
| 					if (!((ptr->status) & 0x0040))
 | |
| 						dev->stats.tx_heartbeat_errors++;
 | |
| 					if ((ptr->status) & 0x0400)
 | |
| 						dev->stats.tx_carrier_errors++;
 | |
| 					if ((ptr->status) & 0x0800)
 | |
| 						dev->stats.collisions++;
 | |
| 					if ((ptr->status) & 0x1000)
 | |
| 						dev->stats.tx_aborted_errors++;
 | |
| 				}
 | |
| 
 | |
| 				dev_kfree_skb_irq(skb);
 | |
| 
 | |
| 				tx_cmd->cmd.command = 0; /* Mark free */
 | |
| 				break;
 | |
| 			    }
 | |
| 			case CmdTDR:
 | |
| 			    {
 | |
| 				unsigned short status = ((struct tdr_cmd *)ptr)->status;
 | |
| 
 | |
| 				if (status & 0x8000) {
 | |
| 					DEB(DEB_TDR,printk(KERN_INFO "%s: link ok.\n", dev->name));
 | |
| 				} else {
 | |
| 					if (status & 0x4000)
 | |
| 						printk(KERN_ERR "%s: Transceiver problem.\n", dev->name);
 | |
| 					if (status & 0x2000)
 | |
| 						printk(KERN_ERR "%s: Termination problem.\n", dev->name);
 | |
| 					if (status & 0x1000)
 | |
| 						printk(KERN_ERR "%s: Short circuit.\n", dev->name);
 | |
| 
 | |
| 					DEB(DEB_TDR,printk(KERN_INFO "%s: Time %d.\n", dev->name, status & 0x07ff));
 | |
| 				}
 | |
| 				break;
 | |
| 			    }
 | |
| 			case CmdConfigure:
 | |
| 			case CmdMulticastList:
 | |
| 				/* Zap command so set_multicast_list() knows it is free */
 | |
| 				ptr->command = 0;
 | |
| 				break;
 | |
| 			}
 | |
| 			ptr->v_next = ptr->b_next = I596_NULL;
 | |
| 			lp->last_cmd = jiffies;
 | |
| 		}
 | |
| 
 | |
| 		ptr = lp->cmd_head;
 | |
| 		while ((ptr != I596_NULL) && (ptr != lp->cmd_tail)) {
 | |
| 			ptr->command &= 0x1fff;
 | |
| 			ptr = ptr->v_next;
 | |
| 		}
 | |
| 
 | |
| 		if ((lp->cmd_head != I596_NULL))
 | |
| 			ack_cmd |= CUC_START;
 | |
| 		lp->scb.cmd = WSWAPcmd(virt_to_bus(&lp->cmd_head->status));
 | |
| 	}
 | |
| 	if ((status & 0x1000) || (status & 0x4000)) {
 | |
| 		if ((status & 0x4000))
 | |
| 			DEB(DEB_INTS,printk(KERN_DEBUG "%s: i596 interrupt received a frame.\n", dev->name));
 | |
| 		i596_rx(dev);
 | |
| 		/* Only RX_START if stopped - RGH 07-07-96 */
 | |
| 		if (status & 0x1000) {
 | |
| 			if (netif_running(dev)) {
 | |
| 				DEB(DEB_ERRORS,printk(KERN_ERR "%s: i596 interrupt receive unit inactive, status 0x%x\n", dev->name, status));
 | |
| 				ack_cmd |= RX_START;
 | |
| 				dev->stats.rx_errors++;
 | |
| 				dev->stats.rx_fifo_errors++;
 | |
| 				rebuild_rx_bufs(dev);
 | |
| 			}
 | |
| 		}
 | |
| 	}
 | |
| 	wait_cmd(dev,lp,100,"i596 interrupt, timeout");
 | |
| 	lp->scb.command = ack_cmd;
 | |
| 
 | |
| #ifdef ENABLE_MVME16x_NET
 | |
| 	if (MACH_IS_MVME16x) {
 | |
| 		/* Ack the interrupt */
 | |
| 
 | |
| 		volatile unsigned char *pcc2 = (unsigned char *) 0xfff42000;
 | |
| 
 | |
| 		pcc2[0x2a] |= 0x08;
 | |
| 	}
 | |
| #endif
 | |
| #ifdef ENABLE_BVME6000_NET
 | |
| 	if (MACH_IS_BVME6000) {
 | |
| 		volatile unsigned char *ethirq = (unsigned char *) BVME_ETHIRQ_REG;
 | |
| 
 | |
| 		*ethirq = 1;
 | |
| 		*ethirq = 3;
 | |
| 	}
 | |
| #endif
 | |
| #ifdef ENABLE_APRICOT
 | |
| 	(void) inb(ioaddr + 0x10);
 | |
| 	outb(4, ioaddr + 0xf);
 | |
| #endif
 | |
| 	CA(dev);
 | |
| 
 | |
| 	DEB(DEB_INTS,printk(KERN_DEBUG "%s: exiting interrupt.\n", dev->name));
 | |
| 
 | |
| 	spin_unlock (&lp->lock);
 | |
| 	return IRQ_RETVAL(handled);
 | |
| }
 | |
| 
 | |
| static int i596_close(struct net_device *dev)
 | |
| {
 | |
| 	struct i596_private *lp = dev->ml_priv;
 | |
| 	unsigned long flags;
 | |
| 
 | |
| 	netif_stop_queue(dev);
 | |
| 
 | |
| 	DEB(DEB_INIT,printk(KERN_DEBUG "%s: Shutting down ethercard, status was %4.4x.\n",
 | |
| 		       dev->name, lp->scb.status));
 | |
| 
 | |
| 	spin_lock_irqsave(&lp->lock, flags);
 | |
| 
 | |
| 	wait_cmd(dev,lp,100,"close1 timed out");
 | |
| 	lp->scb.command = CUC_ABORT | RX_ABORT;
 | |
| 	CA(dev);
 | |
| 
 | |
| 	wait_cmd(dev,lp,100,"close2 timed out");
 | |
| 
 | |
| 	spin_unlock_irqrestore(&lp->lock, flags);
 | |
| 	DEB(DEB_STRUCT,i596_display_data(dev));
 | |
| 	i596_cleanup_cmd(dev,lp);
 | |
| 
 | |
| #ifdef ENABLE_MVME16x_NET
 | |
| 	if (MACH_IS_MVME16x) {
 | |
| 		volatile unsigned char *pcc2 = (unsigned char *) 0xfff42000;
 | |
| 
 | |
| 		/* Disable all ints */
 | |
| 		pcc2[0x28] = 1;
 | |
| 		pcc2[0x2a] = 0x40;
 | |
| 		pcc2[0x2b] = 0x40;	/* Set snooping bits now! */
 | |
| 	}
 | |
| #endif
 | |
| #ifdef ENABLE_BVME6000_NET
 | |
| 	if (MACH_IS_BVME6000) {
 | |
| 		volatile unsigned char *ethirq = (unsigned char *) BVME_ETHIRQ_REG;
 | |
| 
 | |
| 		*ethirq = 1;
 | |
| 	}
 | |
| #endif
 | |
| 
 | |
| #ifdef ENABLE_MVME16x_NET
 | |
| 	free_irq(0x56, dev);
 | |
| #endif
 | |
| 	free_irq(dev->irq, dev);
 | |
| 	remove_rx_bufs(dev);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  *    Set or clear the multicast filter for this adaptor.
 | |
|  */
 | |
| 
 | |
| static void set_multicast_list(struct net_device *dev)
 | |
| {
 | |
| 	struct i596_private *lp = dev->ml_priv;
 | |
| 	int config = 0, cnt;
 | |
| 
 | |
| 	DEB(DEB_MULTI,printk(KERN_DEBUG "%s: set multicast list, %d entries, promisc %s, allmulti %s\n",
 | |
| 		dev->name, netdev_mc_count(dev),
 | |
| 		dev->flags & IFF_PROMISC  ? "ON" : "OFF",
 | |
| 		dev->flags & IFF_ALLMULTI ? "ON" : "OFF"));
 | |
| 
 | |
| 	if (wait_cfg(dev, &lp->cf_cmd.cmd, 1000, "config change request timed out"))
 | |
| 		return;
 | |
| 
 | |
| 	if ((dev->flags & IFF_PROMISC) && !(lp->cf_cmd.i596_config[8] & 0x01)) {
 | |
| 		lp->cf_cmd.i596_config[8] |= 0x01;
 | |
| 		config = 1;
 | |
| 	}
 | |
| 	if (!(dev->flags & IFF_PROMISC) && (lp->cf_cmd.i596_config[8] & 0x01)) {
 | |
| 		lp->cf_cmd.i596_config[8] &= ~0x01;
 | |
| 		config = 1;
 | |
| 	}
 | |
| 	if ((dev->flags & IFF_ALLMULTI) && (lp->cf_cmd.i596_config[11] & 0x20)) {
 | |
| 		lp->cf_cmd.i596_config[11] &= ~0x20;
 | |
| 		config = 1;
 | |
| 	}
 | |
| 	if (!(dev->flags & IFF_ALLMULTI) && !(lp->cf_cmd.i596_config[11] & 0x20)) {
 | |
| 		lp->cf_cmd.i596_config[11] |= 0x20;
 | |
| 		config = 1;
 | |
| 	}
 | |
| 	if (config) {
 | |
| 		lp->cf_cmd.cmd.command = CmdConfigure;
 | |
| 		i596_add_cmd(dev, &lp->cf_cmd.cmd);
 | |
| 	}
 | |
| 
 | |
| 	cnt = netdev_mc_count(dev);
 | |
| 	if (cnt > MAX_MC_CNT)
 | |
| 	{
 | |
| 		cnt = MAX_MC_CNT;
 | |
| 		printk(KERN_ERR "%s: Only %d multicast addresses supported",
 | |
| 			dev->name, cnt);
 | |
| 	}
 | |
| 
 | |
| 	if (!netdev_mc_empty(dev)) {
 | |
| 		struct netdev_hw_addr *ha;
 | |
| 		unsigned char *cp;
 | |
| 		struct mc_cmd *cmd;
 | |
| 
 | |
| 		if (wait_cfg(dev, &lp->mc_cmd.cmd, 1000, "multicast list change request timed out"))
 | |
| 			return;
 | |
| 		cmd = &lp->mc_cmd;
 | |
| 		cmd->cmd.command = CmdMulticastList;
 | |
| 		cmd->mc_cnt = cnt * ETH_ALEN;
 | |
| 		cp = cmd->mc_addrs;
 | |
| 		netdev_for_each_mc_addr(ha, dev) {
 | |
| 			if (!cnt--)
 | |
| 				break;
 | |
| 			memcpy(cp, ha->addr, ETH_ALEN);
 | |
| 			if (i596_debug > 1)
 | |
| 				DEB(DEB_MULTI,printk(KERN_INFO "%s: Adding address %pM\n",
 | |
| 						dev->name, cp));
 | |
| 			cp += ETH_ALEN;
 | |
| 		}
 | |
| 		i596_add_cmd(dev, &cmd->cmd);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| #ifdef MODULE
 | |
| static struct net_device *dev_82596;
 | |
| 
 | |
| #ifdef ENABLE_APRICOT
 | |
| module_param(irq, int, 0);
 | |
| MODULE_PARM_DESC(irq, "Apricot IRQ number");
 | |
| #endif
 | |
| 
 | |
| static int debug = -1;
 | |
| module_param(debug, int, 0);
 | |
| MODULE_PARM_DESC(debug, "i82596 debug mask");
 | |
| 
 | |
| int __init init_module(void)
 | |
| {
 | |
| 	if (debug >= 0)
 | |
| 		i596_debug = debug;
 | |
| 	dev_82596 = i82596_probe(-1);
 | |
| 	if (IS_ERR(dev_82596))
 | |
| 		return PTR_ERR(dev_82596);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| void __exit cleanup_module(void)
 | |
| {
 | |
| 	unregister_netdev(dev_82596);
 | |
| #ifdef __mc68000__
 | |
| 	/* XXX This assumes default cache mode to be IOMAP_FULL_CACHING,
 | |
| 	 * XXX which may be invalid (CONFIG_060_WRITETHROUGH)
 | |
| 	 */
 | |
| 
 | |
| 	kernel_set_cachemode((void *)(dev_82596->mem_start), 4096,
 | |
| 			IOMAP_FULL_CACHING);
 | |
| #endif
 | |
| 	free_page ((u32)(dev_82596->mem_start));
 | |
| #ifdef ENABLE_APRICOT
 | |
| 	/* If we don't do this, we can't re-insmod it later. */
 | |
| 	release_region(dev_82596->base_addr, I596_TOTAL_SIZE);
 | |
| #endif
 | |
| 	free_netdev(dev_82596);
 | |
| }
 | |
| 
 | |
| #endif				/* MODULE */
 |