DISPC can drive data lines either on rising or falling pixel clock edge, which can be configured by the user. Sync lines can also be driven on rising or falling pixel clock edge, but additionally the HW can be configured to drive the sync lines on opposite clock edge from the data lines. This opposite edge setting does not make any sense, as the same effect can be achieved by just setting the sync lines to be driven on the other edge compared to the data lines. It feels like some kind of backward compatibility option, even if all DSS versions seem to have the same implementation. To simplify the code and configuration of the signals, and to make the dispc timings more compatible with what is used on other platforms, let's just remove the whole opposite-edge support. The drivers that used OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES setting are changed so that they use the opposite setting from the data edge. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
420 lines
9.4 KiB
C
420 lines
9.4 KiB
C
/*
|
|
* LCD panel driver for Sharp LS037V7DW01
|
|
*
|
|
* Copyright (C) 2013 Texas Instruments
|
|
* Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published by
|
|
* the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <video/omapdss.h>
|
|
#include <video/omap-panel-data.h>
|
|
|
|
struct panel_drv_data {
|
|
struct omap_dss_device dssdev;
|
|
struct omap_dss_device *in;
|
|
struct regulator *vcc;
|
|
|
|
int data_lines;
|
|
|
|
struct omap_video_timings videomode;
|
|
|
|
struct gpio_desc *resb_gpio; /* low = reset active min 20 us */
|
|
struct gpio_desc *ini_gpio; /* high = power on */
|
|
struct gpio_desc *mo_gpio; /* low = 480x640, high = 240x320 */
|
|
struct gpio_desc *lr_gpio; /* high = conventional horizontal scanning */
|
|
struct gpio_desc *ud_gpio; /* high = conventional vertical scanning */
|
|
};
|
|
|
|
static const struct omap_video_timings sharp_ls_timings = {
|
|
.x_res = 480,
|
|
.y_res = 640,
|
|
|
|
.pixelclock = 19200000,
|
|
|
|
.hsw = 2,
|
|
.hfp = 1,
|
|
.hbp = 28,
|
|
|
|
.vsw = 1,
|
|
.vfp = 1,
|
|
.vbp = 1,
|
|
|
|
.vsync_level = OMAPDSS_SIG_ACTIVE_LOW,
|
|
.hsync_level = OMAPDSS_SIG_ACTIVE_LOW,
|
|
.data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE,
|
|
.de_level = OMAPDSS_SIG_ACTIVE_HIGH,
|
|
.sync_pclk_edge = OMAPDSS_DRIVE_SIG_FALLING_EDGE,
|
|
};
|
|
|
|
#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
|
|
|
|
static int sharp_ls_connect(struct omap_dss_device *dssdev)
|
|
{
|
|
struct panel_drv_data *ddata = to_panel_data(dssdev);
|
|
struct omap_dss_device *in = ddata->in;
|
|
int r;
|
|
|
|
if (omapdss_device_is_connected(dssdev))
|
|
return 0;
|
|
|
|
r = in->ops.dpi->connect(in, dssdev);
|
|
if (r)
|
|
return r;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sharp_ls_disconnect(struct omap_dss_device *dssdev)
|
|
{
|
|
struct panel_drv_data *ddata = to_panel_data(dssdev);
|
|
struct omap_dss_device *in = ddata->in;
|
|
|
|
if (!omapdss_device_is_connected(dssdev))
|
|
return;
|
|
|
|
in->ops.dpi->disconnect(in, dssdev);
|
|
}
|
|
|
|
static int sharp_ls_enable(struct omap_dss_device *dssdev)
|
|
{
|
|
struct panel_drv_data *ddata = to_panel_data(dssdev);
|
|
struct omap_dss_device *in = ddata->in;
|
|
int r;
|
|
|
|
if (!omapdss_device_is_connected(dssdev))
|
|
return -ENODEV;
|
|
|
|
if (omapdss_device_is_enabled(dssdev))
|
|
return 0;
|
|
|
|
if (ddata->data_lines)
|
|
in->ops.dpi->set_data_lines(in, ddata->data_lines);
|
|
in->ops.dpi->set_timings(in, &ddata->videomode);
|
|
|
|
if (ddata->vcc) {
|
|
r = regulator_enable(ddata->vcc);
|
|
if (r != 0)
|
|
return r;
|
|
}
|
|
|
|
r = in->ops.dpi->enable(in);
|
|
if (r) {
|
|
regulator_disable(ddata->vcc);
|
|
return r;
|
|
}
|
|
|
|
/* wait couple of vsyncs until enabling the LCD */
|
|
msleep(50);
|
|
|
|
if (ddata->resb_gpio)
|
|
gpiod_set_value_cansleep(ddata->resb_gpio, 1);
|
|
|
|
if (ddata->ini_gpio)
|
|
gpiod_set_value_cansleep(ddata->ini_gpio, 1);
|
|
|
|
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sharp_ls_disable(struct omap_dss_device *dssdev)
|
|
{
|
|
struct panel_drv_data *ddata = to_panel_data(dssdev);
|
|
struct omap_dss_device *in = ddata->in;
|
|
|
|
if (!omapdss_device_is_enabled(dssdev))
|
|
return;
|
|
|
|
if (ddata->ini_gpio)
|
|
gpiod_set_value_cansleep(ddata->ini_gpio, 0);
|
|
|
|
if (ddata->resb_gpio)
|
|
gpiod_set_value_cansleep(ddata->resb_gpio, 0);
|
|
|
|
/* wait at least 5 vsyncs after disabling the LCD */
|
|
|
|
msleep(100);
|
|
|
|
in->ops.dpi->disable(in);
|
|
|
|
if (ddata->vcc)
|
|
regulator_disable(ddata->vcc);
|
|
|
|
dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
|
|
}
|
|
|
|
static void sharp_ls_set_timings(struct omap_dss_device *dssdev,
|
|
struct omap_video_timings *timings)
|
|
{
|
|
struct panel_drv_data *ddata = to_panel_data(dssdev);
|
|
struct omap_dss_device *in = ddata->in;
|
|
|
|
ddata->videomode = *timings;
|
|
dssdev->panel.timings = *timings;
|
|
|
|
in->ops.dpi->set_timings(in, timings);
|
|
}
|
|
|
|
static void sharp_ls_get_timings(struct omap_dss_device *dssdev,
|
|
struct omap_video_timings *timings)
|
|
{
|
|
struct panel_drv_data *ddata = to_panel_data(dssdev);
|
|
|
|
*timings = ddata->videomode;
|
|
}
|
|
|
|
static int sharp_ls_check_timings(struct omap_dss_device *dssdev,
|
|
struct omap_video_timings *timings)
|
|
{
|
|
struct panel_drv_data *ddata = to_panel_data(dssdev);
|
|
struct omap_dss_device *in = ddata->in;
|
|
|
|
return in->ops.dpi->check_timings(in, timings);
|
|
}
|
|
|
|
static struct omap_dss_driver sharp_ls_ops = {
|
|
.connect = sharp_ls_connect,
|
|
.disconnect = sharp_ls_disconnect,
|
|
|
|
.enable = sharp_ls_enable,
|
|
.disable = sharp_ls_disable,
|
|
|
|
.set_timings = sharp_ls_set_timings,
|
|
.get_timings = sharp_ls_get_timings,
|
|
.check_timings = sharp_ls_check_timings,
|
|
|
|
.get_resolution = omapdss_default_get_resolution,
|
|
};
|
|
|
|
static int sharp_ls_get_gpio(struct device *dev, int gpio, unsigned long flags,
|
|
char *desc, struct gpio_desc **gpiod)
|
|
{
|
|
struct gpio_desc *gd;
|
|
int r;
|
|
|
|
*gpiod = NULL;
|
|
|
|
r = devm_gpio_request_one(dev, gpio, flags, desc);
|
|
if (r)
|
|
return r == -ENOENT ? 0 : r;
|
|
|
|
gd = gpio_to_desc(gpio);
|
|
if (IS_ERR(gd))
|
|
return PTR_ERR(gd) == -ENOENT ? 0 : PTR_ERR(gd);
|
|
|
|
*gpiod = gd;
|
|
return 0;
|
|
}
|
|
|
|
static int sharp_ls_probe_pdata(struct platform_device *pdev)
|
|
{
|
|
const struct panel_sharp_ls037v7dw01_platform_data *pdata;
|
|
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
|
|
struct omap_dss_device *dssdev, *in;
|
|
int r;
|
|
|
|
pdata = dev_get_platdata(&pdev->dev);
|
|
|
|
in = omap_dss_find_output(pdata->source);
|
|
if (in == NULL) {
|
|
dev_err(&pdev->dev, "failed to find video source '%s'\n",
|
|
pdata->source);
|
|
return -EPROBE_DEFER;
|
|
}
|
|
|
|
ddata->in = in;
|
|
|
|
ddata->data_lines = pdata->data_lines;
|
|
|
|
dssdev = &ddata->dssdev;
|
|
dssdev->name = pdata->name;
|
|
|
|
r = sharp_ls_get_gpio(&pdev->dev, pdata->mo_gpio, GPIOF_OUT_INIT_LOW,
|
|
"lcd MO", &ddata->mo_gpio);
|
|
if (r)
|
|
return r;
|
|
r = sharp_ls_get_gpio(&pdev->dev, pdata->lr_gpio, GPIOF_OUT_INIT_HIGH,
|
|
"lcd LR", &ddata->lr_gpio);
|
|
if (r)
|
|
return r;
|
|
r = sharp_ls_get_gpio(&pdev->dev, pdata->ud_gpio, GPIOF_OUT_INIT_HIGH,
|
|
"lcd UD", &ddata->ud_gpio);
|
|
if (r)
|
|
return r;
|
|
r = sharp_ls_get_gpio(&pdev->dev, pdata->resb_gpio, GPIOF_OUT_INIT_LOW,
|
|
"lcd RESB", &ddata->resb_gpio);
|
|
if (r)
|
|
return r;
|
|
r = sharp_ls_get_gpio(&pdev->dev, pdata->ini_gpio, GPIOF_OUT_INIT_LOW,
|
|
"lcd INI", &ddata->ini_gpio);
|
|
if (r)
|
|
return r;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sharp_ls_get_gpio_of(struct device *dev, int index, int val,
|
|
const char *desc, struct gpio_desc **gpiod)
|
|
{
|
|
struct gpio_desc *gd;
|
|
int r;
|
|
|
|
*gpiod = NULL;
|
|
|
|
gd = devm_gpiod_get_index(dev, desc, index);
|
|
if (IS_ERR(gd))
|
|
return PTR_ERR(gd) == -ENOENT ? 0 : PTR_ERR(gd);
|
|
|
|
r = gpiod_direction_output(gd, val);
|
|
if (r)
|
|
return r;
|
|
|
|
*gpiod = gd;
|
|
return 0;
|
|
}
|
|
|
|
static int sharp_ls_probe_of(struct platform_device *pdev)
|
|
{
|
|
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
|
|
struct device_node *node = pdev->dev.of_node;
|
|
struct omap_dss_device *in;
|
|
int r;
|
|
|
|
ddata->vcc = devm_regulator_get(&pdev->dev, "envdd");
|
|
if (IS_ERR(ddata->vcc)) {
|
|
dev_err(&pdev->dev, "failed to get regulator\n");
|
|
return PTR_ERR(ddata->vcc);
|
|
}
|
|
|
|
/* lcd INI */
|
|
r = sharp_ls_get_gpio_of(&pdev->dev, 0, 0, "enable", &ddata->ini_gpio);
|
|
if (r)
|
|
return r;
|
|
|
|
/* lcd RESB */
|
|
r = sharp_ls_get_gpio_of(&pdev->dev, 0, 0, "reset", &ddata->resb_gpio);
|
|
if (r)
|
|
return r;
|
|
|
|
/* lcd MO */
|
|
r = sharp_ls_get_gpio_of(&pdev->dev, 0, 0, "mode", &ddata->mo_gpio);
|
|
if (r)
|
|
return r;
|
|
|
|
/* lcd LR */
|
|
r = sharp_ls_get_gpio_of(&pdev->dev, 1, 1, "mode", &ddata->lr_gpio);
|
|
if (r)
|
|
return r;
|
|
|
|
/* lcd UD */
|
|
r = sharp_ls_get_gpio_of(&pdev->dev, 2, 1, "mode", &ddata->ud_gpio);
|
|
if (r)
|
|
return r;
|
|
|
|
in = omapdss_of_find_source_for_first_ep(node);
|
|
if (IS_ERR(in)) {
|
|
dev_err(&pdev->dev, "failed to find video source\n");
|
|
return PTR_ERR(in);
|
|
}
|
|
|
|
ddata->in = in;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sharp_ls_probe(struct platform_device *pdev)
|
|
{
|
|
struct panel_drv_data *ddata;
|
|
struct omap_dss_device *dssdev;
|
|
int r;
|
|
|
|
ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
|
|
if (ddata == NULL)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, ddata);
|
|
|
|
if (dev_get_platdata(&pdev->dev)) {
|
|
r = sharp_ls_probe_pdata(pdev);
|
|
if (r)
|
|
return r;
|
|
} else if (pdev->dev.of_node) {
|
|
r = sharp_ls_probe_of(pdev);
|
|
if (r)
|
|
return r;
|
|
} else {
|
|
return -ENODEV;
|
|
}
|
|
|
|
ddata->videomode = sharp_ls_timings;
|
|
|
|
dssdev = &ddata->dssdev;
|
|
dssdev->dev = &pdev->dev;
|
|
dssdev->driver = &sharp_ls_ops;
|
|
dssdev->type = OMAP_DISPLAY_TYPE_DPI;
|
|
dssdev->owner = THIS_MODULE;
|
|
dssdev->panel.timings = ddata->videomode;
|
|
dssdev->phy.dpi.data_lines = ddata->data_lines;
|
|
|
|
r = omapdss_register_display(dssdev);
|
|
if (r) {
|
|
dev_err(&pdev->dev, "Failed to register panel\n");
|
|
goto err_reg;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_reg:
|
|
omap_dss_put_device(ddata->in);
|
|
return r;
|
|
}
|
|
|
|
static int __exit sharp_ls_remove(struct platform_device *pdev)
|
|
{
|
|
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
|
|
struct omap_dss_device *dssdev = &ddata->dssdev;
|
|
struct omap_dss_device *in = ddata->in;
|
|
|
|
omapdss_unregister_display(dssdev);
|
|
|
|
sharp_ls_disable(dssdev);
|
|
sharp_ls_disconnect(dssdev);
|
|
|
|
omap_dss_put_device(in);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id sharp_ls_of_match[] = {
|
|
{ .compatible = "omapdss,sharp,ls037v7dw01", },
|
|
{},
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, sharp_ls_of_match);
|
|
|
|
static struct platform_driver sharp_ls_driver = {
|
|
.probe = sharp_ls_probe,
|
|
.remove = __exit_p(sharp_ls_remove),
|
|
.driver = {
|
|
.name = "panel-sharp-ls037v7dw01",
|
|
.of_match_table = sharp_ls_of_match,
|
|
.suppress_bind_attrs = true,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(sharp_ls_driver);
|
|
|
|
MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
|
|
MODULE_DESCRIPTION("Sharp LS037V7DW01 Panel Driver");
|
|
MODULE_LICENSE("GPL");
|