7136d457f3
OMAP4/5 has been (ab)using the gic_arch_extn to provide
wakeup from suspend, and it makes a lot of sense to convert
this code to use stacked domains instead.
This patch does just this, updating the DT files to actually
reflect what the HW provides.
BIG FAT WARNING: because the DTs were so far lying by not
exposing the WUGEN HW block, kernels with this patch applied
won't have any suspend-resume facility when booted with old DTs,
and old kernels with updated DTs won't even boot.
On a platform with this patch applied, the system looks like
this:
root@bacon-fat:~# cat /proc/interrupts
CPU0 CPU1
16: 0 0 WUGEN 37 gp_timer
19: 233799 155916 GIC 27 arch_timer
23: 0 0 WUGEN 9 l3-dbg-irq
24: 1 0 WUGEN 10 l3-app-irq
27: 282 0 WUGEN 13 omap-dma-engine
44: 0 0 4ae10000.gpio 13 DMA
294: 0 0 WUGEN 20 gpmc
297: 506 0 WUGEN 56 48070000.i2c
298: 0 0 WUGEN 57 48072000.i2c
299: 0 0 WUGEN 61 48060000.i2c
300: 0 0 WUGEN 62 4807a000.i2c
301: 8 0 WUGEN 60 4807c000.i2c
308: 2439 0 WUGEN 74 OMAP UART2
312: 362 0 WUGEN 83 mmc2
313: 502 0 WUGEN 86 mmc0
314: 13 0 WUGEN 94 mmc1
350: 0 0 PRCM pinctrl, pinctrl
406: 35155709 0 GIC 109 ehci_hcd:usb1
407: 0 0 WUGEN 7 palmas
409: 0 0 WUGEN 119 twl6040
410: 0 0 twl6040 5 twl6040_irq_ready
411: 0 0 twl6040 0 twl6040_irq_th
IPI0: 0 1 CPU wakeup interrupts
IPI1: 0 0 Timer broadcast interrupts
IPI2: 95334 902334 Rescheduling interrupts
IPI3: 0 0 Function call interrupts
IPI4: 479 648 Single function call interrupts
IPI5: 0 0 CPU stop interrupts
IPI6: 0 0 IRQ work interrupts
IPI7: 0 0 completion interrupts
Err: 0
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/1426088629-15377-8-git-send-email-marc.zyngier@arm.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
634 lines
14 KiB
Text
634 lines
14 KiB
Text
/*
|
|
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
/dts-v1/;
|
|
|
|
#include "omap5.dtsi"
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
|
|
/ {
|
|
model = "TI OMAP5 uEVM board";
|
|
compatible = "ti,omap5-uevm", "ti,omap5";
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x80000000 0x7F000000>; /* 2032 MB */
|
|
};
|
|
|
|
aliases {
|
|
display0 = &hdmi0;
|
|
};
|
|
|
|
vmmcsd_fixed: fixedregulator-mmcsd {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vmmcsd_fixed";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
};
|
|
|
|
/* HS USB Host PHY on PORT 2 */
|
|
hsusb2_phy: hsusb2_phy {
|
|
compatible = "usb-nop-xceiv";
|
|
reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */
|
|
clocks = <&auxclk1_ck>;
|
|
clock-names = "main_clk";
|
|
clock-frequency = <19200000>;
|
|
};
|
|
|
|
/* HS USB Host PHY on PORT 3 */
|
|
hsusb3_phy: hsusb3_phy {
|
|
compatible = "usb-nop-xceiv";
|
|
reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
led@1 {
|
|
label = "omap5:blue:usr1";
|
|
gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */
|
|
linux,default-trigger = "heartbeat";
|
|
default-state = "off";
|
|
};
|
|
};
|
|
|
|
tpd12s015: encoder@0 {
|
|
compatible = "ti,tpd12s015";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&tpd12s015_pins>;
|
|
|
|
gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>, /* TCA6424A P01, CT CP HPD */
|
|
<&gpio9 1 GPIO_ACTIVE_HIGH>, /* TCA6424A P00, LS OE */
|
|
<&gpio7 1 GPIO_ACTIVE_HIGH>; /* GPIO 193, HPD */
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
tpd12s015_in: endpoint@0 {
|
|
remote-endpoint = <&hdmi_out>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
tpd12s015_out: endpoint@0 {
|
|
remote-endpoint = <&hdmi_connector_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
hdmi0: connector@0 {
|
|
compatible = "hdmi-connector";
|
|
label = "hdmi";
|
|
|
|
type = "b";
|
|
|
|
port {
|
|
hdmi_connector_in: endpoint {
|
|
remote-endpoint = <&tpd12s015_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
sound: sound {
|
|
compatible = "ti,abe-twl6040";
|
|
ti,model = "omap5-uevm";
|
|
|
|
ti,mclk-freq = <19200000>;
|
|
|
|
ti,mcpdm = <&mcpdm>;
|
|
|
|
ti,twl6040 = <&twl6040>;
|
|
|
|
/* Audio routing */
|
|
ti,audio-routing =
|
|
"Headset Stereophone", "HSOL",
|
|
"Headset Stereophone", "HSOR",
|
|
"Line Out", "AUXL",
|
|
"Line Out", "AUXR",
|
|
"HSMIC", "Headset Mic",
|
|
"Headset Mic", "Headset Mic Bias",
|
|
"AFML", "Line In",
|
|
"AFMR", "Line In";
|
|
};
|
|
};
|
|
|
|
&omap5_pmx_core {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <
|
|
&usbhost_pins
|
|
&led_gpio_pins
|
|
>;
|
|
|
|
twl6040_pins: pinmux_twl6040_pins {
|
|
pinctrl-single,pins = <
|
|
0x17e (PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_141 */
|
|
>;
|
|
};
|
|
|
|
mcpdm_pins: pinmux_mcpdm_pins {
|
|
pinctrl-single,pins = <
|
|
0x142 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */
|
|
0x15c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_ul_data.abemcpdm_ul_data */
|
|
0x15e (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_dl_data.abemcpdm_dl_data */
|
|
0x160 (PIN_INPUT_PULLUP | MUX_MODE0) /* abemcpdm_frame.abemcpdm_frame */
|
|
0x162 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_lb_clk.abemcpdm_lb_clk */
|
|
>;
|
|
};
|
|
|
|
mcbsp1_pins: pinmux_mcbsp1_pins {
|
|
pinctrl-single,pins = <
|
|
0x14c (PIN_INPUT | MUX_MODE1) /* abedmic_clk2.abemcbsp1_fsx */
|
|
0x14e (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* abedmic_clk3.abemcbsp1_dx */
|
|
0x150 (PIN_INPUT | MUX_MODE1) /* abeslimbus1_clock.abemcbsp1_clkx */
|
|
0x152 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* abeslimbus1_data.abemcbsp1_dr */
|
|
>;
|
|
};
|
|
|
|
mcbsp2_pins: pinmux_mcbsp2_pins {
|
|
pinctrl-single,pins = <
|
|
0x154 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dr.abemcbsp2_dr */
|
|
0x156 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dx.abemcbsp2_dx */
|
|
0x158 (PIN_INPUT | MUX_MODE0) /* abemcbsp2_fsx.abemcbsp2_fsx */
|
|
0x15a (PIN_INPUT | MUX_MODE0) /* abemcbsp2_clkx.abemcbsp2_clkx */
|
|
>;
|
|
};
|
|
|
|
i2c1_pins: pinmux_i2c1_pins {
|
|
pinctrl-single,pins = <
|
|
0x1b2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
|
|
0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
|
|
>;
|
|
};
|
|
|
|
i2c5_pins: pinmux_i2c5_pins {
|
|
pinctrl-single,pins = <
|
|
0x184 (PIN_INPUT | MUX_MODE0) /* i2c5_scl */
|
|
0x186 (PIN_INPUT | MUX_MODE0) /* i2c5_sda */
|
|
>;
|
|
};
|
|
|
|
mcspi2_pins: pinmux_mcspi2_pins {
|
|
pinctrl-single,pins = <
|
|
0xbc (PIN_INPUT | MUX_MODE0) /* mcspi2_clk */
|
|
0xbe (PIN_INPUT | MUX_MODE0) /* mcspi2_simo */
|
|
0xc0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi2_somi */
|
|
0xc2 (PIN_OUTPUT | MUX_MODE0) /* mcspi2_cs0 */
|
|
>;
|
|
};
|
|
|
|
mcspi3_pins: pinmux_mcspi3_pins {
|
|
pinctrl-single,pins = <
|
|
0x78 (PIN_INPUT | MUX_MODE1) /* mcspi3_somi */
|
|
0x7a (PIN_INPUT | MUX_MODE1) /* mcspi3_cs0 */
|
|
0x7c (PIN_INPUT | MUX_MODE1) /* mcspi3_simo */
|
|
0x7e (PIN_INPUT | MUX_MODE1) /* mcspi3_clk */
|
|
>;
|
|
};
|
|
|
|
mcspi4_pins: pinmux_mcspi4_pins {
|
|
pinctrl-single,pins = <
|
|
0x164 (PIN_INPUT | MUX_MODE1) /* mcspi4_clk */
|
|
0x168 (PIN_INPUT | MUX_MODE1) /* mcspi4_simo */
|
|
0x16a (PIN_INPUT | MUX_MODE1) /* mcspi4_somi */
|
|
0x16c (PIN_INPUT | MUX_MODE1) /* mcspi4_cs0 */
|
|
>;
|
|
};
|
|
|
|
usbhost_pins: pinmux_usbhost_pins {
|
|
pinctrl-single,pins = <
|
|
0x84 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
|
|
0x86 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */
|
|
|
|
0x19e (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */
|
|
0x1a0 (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */
|
|
|
|
0x70 (PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */
|
|
0x6e (PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */
|
|
>;
|
|
};
|
|
|
|
led_gpio_pins: pinmux_led_gpio_pins {
|
|
pinctrl-single,pins = <
|
|
0x196 (PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */
|
|
>;
|
|
};
|
|
|
|
uart1_pins: pinmux_uart1_pins {
|
|
pinctrl-single,pins = <
|
|
0x60 (PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */
|
|
0x62 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */
|
|
0x64 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */
|
|
0x66 (PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */
|
|
>;
|
|
};
|
|
|
|
uart3_pins: pinmux_uart3_pins {
|
|
pinctrl-single,pins = <
|
|
0x19a (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */
|
|
0x19c (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */
|
|
>;
|
|
};
|
|
|
|
uart5_pins: pinmux_uart5_pins {
|
|
pinctrl-single,pins = <
|
|
0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */
|
|
0x172 (PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */
|
|
0x174 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */
|
|
0x176 (PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */
|
|
>;
|
|
};
|
|
|
|
dss_hdmi_pins: pinmux_dss_hdmi_pins {
|
|
pinctrl-single,pins = <
|
|
0x0fc (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
|
|
0x100 (PIN_INPUT | MUX_MODE0) /* hdmi_ddc_scl.hdmi_ddc_scl */
|
|
0x102 (PIN_INPUT | MUX_MODE0) /* hdmi_ddc_sda.hdmi_ddc_sda */
|
|
>;
|
|
};
|
|
|
|
tpd12s015_pins: pinmux_tpd12s015_pins {
|
|
pinctrl-single,pins = <
|
|
0x0fe (PIN_INPUT_PULLDOWN | MUX_MODE6) /* hdmi_hpd.gpio7_193 */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&omap5_pmx_wkup {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <
|
|
&usbhost_wkup_pins
|
|
>;
|
|
|
|
usbhost_wkup_pins: pinmux_usbhost_wkup_pins {
|
|
pinctrl-single,pins = <
|
|
0x1A (PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&mmc1 {
|
|
vmmc-supply = <&ldo9_reg>;
|
|
bus-width = <4>;
|
|
};
|
|
|
|
&mmc2 {
|
|
vmmc-supply = <&vmmcsd_fixed>;
|
|
bus-width = <8>;
|
|
ti,non-removable;
|
|
};
|
|
|
|
&mmc3 {
|
|
bus-width = <4>;
|
|
ti,non-removable;
|
|
};
|
|
|
|
&mmc4 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&mmc5 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&i2c1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1_pins>;
|
|
|
|
clock-frequency = <400000>;
|
|
|
|
palmas: palmas@48 {
|
|
compatible = "ti,palmas";
|
|
interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
|
|
reg = <0x48>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
ti,system-power-controller;
|
|
|
|
extcon_usb3: palmas_usb {
|
|
compatible = "ti,palmas-usb-vid";
|
|
ti,enable-vbus-detection;
|
|
ti,enable-id-detection;
|
|
ti,wakeup;
|
|
};
|
|
|
|
clk32kgaudio: palmas_clk32k@1 {
|
|
compatible = "ti,palmas-clk32kgaudio";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
palmas_pmic {
|
|
compatible = "ti,palmas-pmic";
|
|
interrupt-parent = <&palmas>;
|
|
interrupts = <14 IRQ_TYPE_NONE>;
|
|
interrupt-name = "short-irq";
|
|
|
|
ti,ldo6-vibrator;
|
|
|
|
regulators {
|
|
smps123_reg: smps123 {
|
|
/* VDD_OPP_MPU */
|
|
regulator-name = "smps123";
|
|
regulator-min-microvolt = < 600000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
smps45_reg: smps45 {
|
|
/* VDD_OPP_MM */
|
|
regulator-name = "smps45";
|
|
regulator-min-microvolt = < 600000>;
|
|
regulator-max-microvolt = <1310000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
smps6_reg: smps6 {
|
|
/* VDD_DDR3 - over VDD_SMPS6 */
|
|
regulator-name = "smps6";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
smps7_reg: smps7 {
|
|
/* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
|
|
regulator-name = "smps7";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
smps8_reg: smps8 {
|
|
/* VDD_OPP_CORE */
|
|
regulator-name = "smps8";
|
|
regulator-min-microvolt = < 600000>;
|
|
regulator-max-microvolt = <1310000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
smps9_reg: smps9 {
|
|
/* VDDA_2v1_AUD over VDD_2v1 */
|
|
regulator-name = "smps9";
|
|
regulator-min-microvolt = <2100000>;
|
|
regulator-max-microvolt = <2100000>;
|
|
ti,smps-range = <0x80>;
|
|
};
|
|
|
|
smps10_out2_reg: smps10_out2 {
|
|
/* VBUS_5V_OTG */
|
|
regulator-name = "smps10_out2";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
smps10_out1_reg: smps10_out1 {
|
|
/* VBUS_5V_OTG */
|
|
regulator-name = "smps10_out1";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
};
|
|
|
|
ldo1_reg: ldo1 {
|
|
/* VDDAPHY_CAM: vdda_csiport */
|
|
regulator-name = "ldo1";
|
|
regulator-min-microvolt = <1500000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
ldo2_reg: ldo2 {
|
|
/* VCC_2V8_DISP: Does not go anywhere */
|
|
regulator-name = "ldo2";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
/* Unused */
|
|
status = "disabled";
|
|
};
|
|
|
|
ldo3_reg: ldo3 {
|
|
/* VDDAPHY_MDM: vdda_lli */
|
|
regulator-name = "ldo3";
|
|
regulator-min-microvolt = <1500000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-boot-on;
|
|
/* Only if Modem is used */
|
|
status = "disabled";
|
|
};
|
|
|
|
ldo4_reg: ldo4 {
|
|
/* VDDAPHY_DISP: vdda_dsiport/hdmi */
|
|
regulator-name = "ldo4";
|
|
regulator-min-microvolt = <1500000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
ldo5_reg: ldo5 {
|
|
/* VDDA_1V8_PHY: usb/sata/hdmi.. */
|
|
regulator-name = "ldo5";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo6_reg: ldo6 {
|
|
/* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */
|
|
regulator-name = "ldo6";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo7_reg: ldo7 {
|
|
/* VDD_VPP: vpp1 */
|
|
regulator-name = "ldo7";
|
|
regulator-min-microvolt = <2000000>;
|
|
regulator-max-microvolt = <2000000>;
|
|
/* Only for efuse reprograming! */
|
|
status = "disabled";
|
|
};
|
|
|
|
ldo8_reg: ldo8 {
|
|
/* VDD_3v0: Does not go anywhere */
|
|
regulator-name = "ldo8";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-boot-on;
|
|
/* Unused */
|
|
status = "disabled";
|
|
};
|
|
|
|
ldo9_reg: ldo9 {
|
|
/* VCC_DV_SDIO: vdds_sdcard */
|
|
regulator-name = "ldo9";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldoln_reg: ldoln {
|
|
/* VDDA_1v8_REF: vdds_osc/mm_l4per.. */
|
|
regulator-name = "ldoln";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldousb_reg: ldousb {
|
|
/* VDDA_3V_USB: VDDA_USBHS33 */
|
|
regulator-name = "ldousb";
|
|
regulator-min-microvolt = <3250000>;
|
|
regulator-max-microvolt = <3250000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
regen3_reg: regen3 {
|
|
/* REGEN3 controls LDO9 supply to card */
|
|
regulator-name = "regen3";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
twl6040: twl@4b {
|
|
compatible = "ti,twl6040";
|
|
reg = <0x4b>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&twl6040_pins>;
|
|
|
|
interrupts = <GIC_SPI 119 IRQ_TYPE_NONE>; /* IRQ_SYS_2N cascaded to gic */
|
|
ti,audpwron-gpio = <&gpio5 13 0>; /* gpio line 141 */
|
|
|
|
vio-supply = <&smps7_reg>;
|
|
v2v1-supply = <&smps9_reg>;
|
|
enable-active-high;
|
|
|
|
clocks = <&clk32kgaudio>;
|
|
clock-names = "clk32k";
|
|
};
|
|
};
|
|
|
|
&i2c5 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c5_pins>;
|
|
|
|
clock-frequency = <400000>;
|
|
|
|
gpio9: gpio@22 {
|
|
compatible = "ti,tca6424";
|
|
reg = <0x22>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
};
|
|
|
|
&mcpdm {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mcpdm_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&mcbsp1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mcbsp1_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&mcbsp2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mcbsp2_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbhshost {
|
|
port2-mode = "ehci-hsic";
|
|
port3-mode = "ehci-hsic";
|
|
};
|
|
|
|
&usbhsehci {
|
|
phys = <0 &hsusb2_phy &hsusb3_phy>;
|
|
};
|
|
|
|
&usb3 {
|
|
extcon = <&extcon_usb3>;
|
|
vbus-supply = <&smps10_out1_reg>;
|
|
};
|
|
|
|
&mcspi1 {
|
|
|
|
};
|
|
|
|
&mcspi2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mcspi2_pins>;
|
|
};
|
|
|
|
&mcspi3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mcspi3_pins>;
|
|
};
|
|
|
|
&mcspi4 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mcspi4_pins>;
|
|
};
|
|
|
|
&uart1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart1_pins>;
|
|
};
|
|
|
|
&uart3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart3_pins>;
|
|
};
|
|
|
|
&uart5 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart5_pins>;
|
|
};
|
|
|
|
&cpu0 {
|
|
cpu0-supply = <&smps123_reg>;
|
|
};
|
|
|
|
&dss {
|
|
status = "ok";
|
|
};
|
|
|
|
&hdmi {
|
|
status = "ok";
|
|
vdda-supply = <&ldo4_reg>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&dss_hdmi_pins>;
|
|
|
|
port {
|
|
hdmi_out: endpoint {
|
|
remote-endpoint = <&tpd12s015_in>;
|
|
};
|
|
};
|
|
};
|